summaryrefslogtreecommitdiff
path: root/tools/testing
AgeCommit message (Collapse)Author
2024-02-16selftests: cmsg_ipv6: repeat the exact packetJakub Kicinski
[ Upstream commit 4b00d0c513da58b68df015968721b11396fe4ab3 ] cmsg_ipv6 test requests tcpdump to capture 4 packets, and sends until tcpdump quits. Only the first packet is "real", however, and the rest are basic UDP packets. So if tcpdump doesn't start in time it will miss the real packet and only capture the UDP ones. This makes the test fail on slow machine (no KVM or with debug enabled) 100% of the time, while it passes in fast environments. Repeat the "real" / expected packet. Fixes: 9657ad09e1fa ("selftests: net: test IPV6_TCLASS") Fixes: 05ae83d5a4a2 ("selftests: net: test IPV6_HOPLIMIT") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-16selftests: net: avoid just another constant waitPaolo Abeni
[ Upstream commit 691bb4e49c98a47bc643dd808453136ce78b15b4 ] Using hard-coded constant timeout to wait for some expected event is deemed to fail sooner or later, especially in slow env. Our CI has spotted another of such race: # TEST: ipv6: cleanup of cached exceptions - nexthop objects [FAIL] # can't delete veth device in a timely manner, PMTU dst likely leaked Replace the crude sleep with a loop looking for the expected condition at low interval for a much longer range. Fixes: b3cc4f8a8a41 ("selftests: pmtu: add explicit tests for PMTU exceptions cleanup") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/fd5c745e9bb665b724473af6a9373a8c2a62b247.1706812005.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-16selftests: net: cut more slack for gro fwd tests.Paolo Abeni
[ Upstream commit cb9f4a30fb85e1f4f149ada595a67899adb3db19 ] The udpgro_fwd.sh self-tests are somewhat unstable. There are a few timing constraints the we struggle to meet on very slow environments. Instead of skipping the whole tests in such envs, increase the test resilience WRT very slow hosts: increase the inter-packets timeouts, avoid resetting the counters every second and finally disable reduce the background traffic noise. Tested with: for I in $(seq 1 100); do ./tools/testing/selftests/kselftest_install/run_kselftest.sh \ -t net:udpgro_fwd.sh || exit -1 done in a slow environment. Fixes: a062260a9d5f ("selftests: net: add UDP GRO forwarding self-tests") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/f4b6b11064a0d39182a9ae6a853abae3e9b4426a.1706812005.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests: bonding: Check initial stateBenjamin Poirier
[ Upstream commit 8cc063ae1b3dbe416ce62a15d49af4c2314b45fe ] The purpose of the test_LAG_cleanup() function is to check that some hardware addresses are removed from underlying devices after they have been unenslaved. The test function simply checks that those addresses are not present at the end. However, if the addresses were never added to begin with due to some error in device setup, the test function currently passes. This is a false positive since in that situation the test did not actually exercise the intended functionality. Add a check that the expected addresses are indeed present after device setup. This makes the test function more robust. I noticed this problem when running the team/dev_addr_lists.sh test on a system without support for dummy and ipv6: tools/testing/selftests/drivers/net/team# ./dev_addr_lists.sh Error: Unknown device type. Error: Unknown device type. This program is not intended to be run as root. RTNETLINK answers: Operation not supported TEST: team cleanup mode lacp [ OK ] Fixes: bbb774d921e2 ("net: Add tests for bonding and team address list management") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Link: https://lore.kernel.org/r/20240131140848.360618-3-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests: team: Add missing config optionsBenjamin Poirier
[ Upstream commit 7b6fb3050d8f5e2b6858eef344e47ac1f5442827 ] Similar to commit dd2d40acdbb2 ("selftests: bonding: Add more missing config options"), add more networking-specific config options which are needed for team device tests. For testing, I used the minimal config generated by virtme-ng and I added the options in the config file. Afterwards, the team device test passed. Fixes: bbb774d921e2 ("net: Add tests for bonding and team address list management") Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Link: https://lore.kernel.org/r/20240131140848.360618-2-bpoirier@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests: net: fix available tunnels detectionPaolo Abeni
[ Upstream commit e4e4b6d568d2549583cbda3f8ce567e586cb05da ] The pmtu.sh test tries to detect the tunnel protocols available in the running kernel and properly skip the unsupported cases. In a few more complex setup, such detection is unsuccessful, as the script currently ignores some intermediate error code at setup time. Before: # which: no nettest in (/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin) # TEST: vti6: PMTU exceptions (ESP-in-UDP) [FAIL] # PMTU exception wasn't created after creating tunnel exceeding link layer MTU # ./pmtu.sh: line 931: kill: (7543) - No such process # ./pmtu.sh: line 931: kill: (7544) - No such process After: # xfrm4 not supported # TEST: vti4: PMTU exceptions [SKIP] Fixes: ece1278a9b81 ("selftests: net: add ESP-in-UDP PMTU test") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/cab10e75fda618e6fff8c595b632f47db58b9309.1706635101.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests: net: add missing config for GENEVEMatthias May
[ Upstream commit c9ec85153fea6873c52ed4f5055c87263f1b54f9 ] l2_tos_ttl_inherit.sh verifies the inheritance of tos and ttl for GRETAP, VXLAN and GENEVE. Before testing it checks if the required module is available and if not skips the tests accordingly. Currently only GRETAP and VXLAN are tested because the GENEVE module is missing. Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting") Signed-off-by: Matthias May <matthias.may@westermo.com> Link: https://lore.kernel.org/r/20240130101157.196006-1-matthias.may@westermo.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests: net: give more time for GRO aggregationPaolo Abeni
[ Upstream commit 89abe628375301fedb68770644df845d49018d8b ] The gro.sh test-case relay on the gro_flush_timeout to ensure that all the segments belonging to any given batch are properly aggregated. The other end, the sender is a user-space program transmitting each packet with a separate write syscall. A busy host and/or stracing the sender program can make the relevant segments reach the GRO engine after the flush timeout triggers. Give the GRO flush timeout more slack, to avoid sporadic self-tests failures. Fixes: 9af771d2ec04 ("selftests/net: allow GRO coalesce test on veth") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Tested-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/bffec2beab3a5672dd13ecabe4fad81d2155b367.1706206101.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests/sgx: Fix linker script assertsJo Van Bulck
[ Upstream commit 9fd552ee32c6c1e27c125016b87d295bea6faea7 ] DEFINED only considers symbols, not section names. Hence, replace the check for .got.plt with the _GLOBAL_OFFSET_TABLE_ symbol and remove other (non-essential) asserts. Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/all/20231005153854.25566-10-jo.vanbulck%40cs.kuleuven.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests/bpf: Fix issues in setup_classid_environment()Yafang Shao
[ Upstream commit 4849775587844e44d215289c425bcd70f315efe7 ] If the net_cls subsystem is already mounted, attempting to mount it again in setup_classid_environment() will result in a failure with the error code EBUSY. Despite this, tmpfs will have been successfully mounted at /sys/fs/cgroup/net_cls. Consequently, the /sys/fs/cgroup/net_cls directory will be empty, causing subsequent setup operations to fail. Here's an error log excerpt illustrating the issue when net_cls has already been mounted at /sys/fs/cgroup/net_cls prior to running setup_classid_environment(): - Before that change $ tools/testing/selftests/bpf/test_progs --name=cgroup_v1v2 test_cgroup_v1v2:PASS:server_fd 0 nsec test_cgroup_v1v2:PASS:client_fd 0 nsec test_cgroup_v1v2:PASS:cgroup_fd 0 nsec test_cgroup_v1v2:PASS:server_fd 0 nsec run_test:PASS:skel_open 0 nsec run_test:PASS:prog_attach 0 nsec test_cgroup_v1v2:PASS:cgroup-v2-only 0 nsec (cgroup_helpers.c:248: errno: No such file or directory) Opening Cgroup Procs: /sys/fs/cgroup/net_cls/cgroup.procs (cgroup_helpers.c:540: errno: No such file or directory) Opening cgroup classid: /sys/fs/cgroup/net_cls/cgroup-test-work-dir/net_cls.classid run_test:PASS:skel_open 0 nsec run_test:PASS:prog_attach 0 nsec (cgroup_helpers.c:248: errno: No such file or directory) Opening Cgroup Procs: /sys/fs/cgroup/net_cls/cgroup-test-work-dir/cgroup.procs run_test:FAIL:join_classid unexpected error: 1 (errno 2) test_cgroup_v1v2:FAIL:cgroup-v1v2 unexpected error: -1 (errno 2) (cgroup_helpers.c:248: errno: No such file or directory) Opening Cgroup Procs: /sys/fs/cgroup/net_cls/cgroup.procs #44 cgroup_v1v2:FAIL Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED - After that change $ tools/testing/selftests/bpf/test_progs --name=cgroup_v1v2 #44 cgroup_v1v2:OK Summary: 1/0 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Link: https://lore.kernel.org/r/20231111090034.4248-3-laoar.shao@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests/bpf: Fix pyperf180 compilation failure with clang18Yonghong Song
[ Upstream commit 100888fb6d8a185866b1520031ee7e3182b173de ] With latest clang18 (main branch of llvm-project repo), when building bpf selftests, [~/work/bpf-next (master)]$ make -C tools/testing/selftests/bpf LLVM=1 -j The following compilation error happens: fatal error: error in backend: Branch target out of insn range ... Stack dump: 0. Program arguments: clang -g -Wall -Werror -D__TARGET_ARCH_x86 -mlittle-endian -I/home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/include -I/home/yhs/work/bpf-next/tools/testing/selftests/bpf -I/home/yhs/work/bpf-next/tools/include/uapi -I/home/yhs/work/bpf-next/tools/testing/selftests/usr/include -idirafter /home/yhs/work/llvm-project/llvm/build.18/install/lib/clang/18/include -idirafter /usr/local/include -idirafter /usr/include -Wno-compare-distinct-pointer-types -DENABLE_ATOMICS_TESTS -O2 --target=bpf -c progs/pyperf180.c -mcpu=v3 -o /home/yhs/work/bpf-next/tools/testing/selftests/bpf/pyperf180.bpf.o 1. <eof> parser at end of file 2. Code generation ... The compilation failure only happens to cpu=v2 and cpu=v3. cpu=v4 is okay since cpu=v4 supports 32-bit branch target offset. The above failure is due to upstream llvm patch [1] where some inlining behavior are changed in clang18. To workaround the issue, previously all 180 loop iterations are fully unrolled. The bpf macro __BPF_CPU_VERSION__ (implemented in clang18 recently) is used to avoid unrolling changes if cpu=v4. If __BPF_CPU_VERSION__ is not available and the compiler is clang18, the unrollng amount is unconditionally reduced. [1] https://github.com/llvm/llvm-project/commit/1a2e77cf9e11dbf56b5720c607313a566eebb16e Signed-off-by: Yonghong Song <yonghong.song@linux.dev> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Tested-by: Alan Maguire <alan.maguire@oracle.com> Link: https://lore.kernel.org/bpf/20231110193644.3130906-1-yonghong.song@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-05selftests/bpf: satisfy compiler by having explicit return in btf testAndrii Nakryiko
[ Upstream commit f4c7e887324f5776eef6e6e47a90e0ac8058a7a8 ] Some compilers complain about get_pprint_mapv_size() not returning value in some code paths. Fix with explicit return. Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231102033759.2541186-3-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-31selftests: netdevsim: fix the udp_tunnel_nic testJakub Kicinski
[ Upstream commit 0879020a7817e7ce636372c016b4528f541c9f4d ] This test is missing a whole bunch of checks for interface renaming and one ifup. Presumably it was only used on a system with renaming disabled and NetworkManager running. Fixes: 91f430b2c49d ("selftests: net: add a test for UDP tunnel info infra") Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240123060529.1033912-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25selftests: mlxsw: qos_pfc: Adjust the test to support 8 lanesAmit Cohen
[ Upstream commit b34f4de6d30cbaa8fed905a5080b6eace8c84dc7 ] 'qos_pfc' test checks PFC behavior. The idea is to limit the traffic using a shaper somewhere in the flow of the packets. In this area, the buffer is smaller than the buffer at the beginning of the flow, so it fills up until there is no more space left. The test configures there PFC which is supposed to notice that the headroom is filling up and send PFC Xoff to indicate the transmitter to stop sending traffic for the priorities sharing this PG. The Xon/Xoff threshold is auto-configured and always equal to 2*(MTU rounded up to cell size). Even after sending the PFC Xoff packet, traffic will keep arriving until the transmitter receives and processes the PFC packet. This amount of traffic is known as the PFC delay allowance. Currently the buffer for the delay traffic is configured as 100KB. The MTU in the test is 10KB, therefore the threshold for Xoff is about 20KB. This allows 80KB extra to be stored in this buffer. 8-lane ports use two buffers among which the configured buffer is split, the Xoff threshold then applies to each buffer in parallel. The test does not take into account the behavior of 8-lane ports, when the ports are configured to 400Gbps with 8 lanes or 800Gbps with 8 lanes, packets are dropped and the test fails. Check if the relevant ports use 8 lanes, in such case double the size of the buffer, as the headroom is split half-half. Cc: Shuah Khan <shuah@kernel.org> Fixes: bfa804784e32 ("selftests: mlxsw: Add a PFC test") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/23ff11b7dff031eb04a41c0f5254a2b636cd8ebb.1705502064.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25mlxsw: spectrum_acl_erp: Fix error flow of pool allocation failureAmit Cohen
[ Upstream commit 6d6eeabcfaba2fcadf5443b575789ea606f9de83 ] Lately, a bug was found when many TC filters are added - at some point, several bugs are printed to dmesg [1] and the switch is crashed with segmentation fault. The issue starts when gen_pool_free() fails because of unexpected behavior - a try to free memory which is already freed, this leads to BUG() call which crashes the switch and makes many other bugs. Trying to track down the unexpected behavior led to a bug in eRP code. The function mlxsw_sp_acl_erp_table_alloc() gets a pointer to the allocated index, sets the value and returns an error code. When gen_pool_alloc() fails it returns address 0, we track it and return -ENOBUFS outside, BUT the call for gen_pool_alloc() already override the index in erp_table structure. This is a problem when such allocation is done as part of table expansion. This is not a new table, which will not be used in case of allocation failure. We try to expand eRP table and override the current index (non-zero) with zero. Then, it leads to an unexpected behavior when address 0 is freed twice. Note that address 0 is valid in erp_table->base_index and indeed other tables use it. gen_pool_alloc() fails in case that there is no space left in the pre-allocated pool, in our case, the pool is limited to ACL_MAX_ERPT_BANK_SIZE, which is read from hardware. When more than max erp entries are required, we exceed the limit and return an error, this error leads to "Failed to migrate vregion" print. Fix this by changing erp_table->base_index only in case of a successful allocation. Add a test case for such a scenario. Without this fix it causes segmentation fault: $ TESTS="max_erp_entries_test" ./tc_flower.sh ./tc_flower.sh: line 988: 1560 Segmentation fault tc filter del dev $h2 ingress chain $i protocol ip pref $i handle $j flower &>/dev/null [1]: kernel BUG at lib/genalloc.c:508! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 6 PID: 3531 Comm: tc Not tainted 6.7.0-rc5-custom-ga6893f479f5e #1 Hardware name: Mellanox Technologies Ltd. MSN4700/VMOD0010, BIOS 5.11 07/12/2021 RIP: 0010:gen_pool_free_owner+0xc9/0xe0 ... Call Trace: <TASK> __mlxsw_sp_acl_erp_table_other_dec+0x70/0xa0 [mlxsw_spectrum] mlxsw_sp_acl_erp_mask_destroy+0xf5/0x110 [mlxsw_spectrum] objagg_obj_root_destroy+0x18/0x80 [objagg] objagg_obj_destroy+0x12c/0x130 [objagg] mlxsw_sp_acl_erp_mask_put+0x37/0x50 [mlxsw_spectrum] mlxsw_sp_acl_ctcam_region_entry_remove+0x74/0xa0 [mlxsw_spectrum] mlxsw_sp_acl_ctcam_entry_del+0x1e/0x40 [mlxsw_spectrum] mlxsw_sp_acl_tcam_ventry_del+0x78/0xd0 [mlxsw_spectrum] mlxsw_sp_flower_destroy+0x4d/0x70 [mlxsw_spectrum] mlxsw_sp_flow_block_cb+0x73/0xb0 [mlxsw_spectrum] tc_setup_cb_destroy+0xc1/0x180 fl_hw_destroy_filter+0x94/0xc0 [cls_flower] __fl_delete+0x1ac/0x1c0 [cls_flower] fl_destroy+0xc2/0x150 [cls_flower] tcf_proto_destroy+0x1a/0xa0 ... mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion Fixes: f465261aa105 ("mlxsw: spectrum_acl: Implement common eRP core") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/4cfca254dfc0e5d283974801a24371c7b6db5989.1705502064.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25selftests/sgx: Skip non X86_64 platformZhao Mengmeng
[ Upstream commit 981cf568a8644161c2f15c02278ebc2834b51ba6 ] When building whole selftests on arm64, rsync gives an erorr about sgx: rsync: [sender] link_stat "/root/linux-next/tools/testing/selftests/sgx/test_encl.elf" failed: No such file or directory (2) rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1327) [sender=3.2.5] The root casue is sgx only used on X86_64, and shall be skipped on other platforms. Fix this by moving TEST_CUSTOM_PROGS and TEST_FILES inside the if check, then the build result will be "Skipping non-existent dir: sgx". Fixes: 2adcba79e69d ("selftests/x86: Add a selftest for SGX") Signed-off-by: Zhao Mengmeng <zhaomengmeng@kylinos.cn> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/all/20231206025605.3965302-1-zhaomzhao%40126.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25selftests/sgx: Include memory clobber for inline asm in test enclaveJo Van Bulck
[ Upstream commit 853a57a43ebdb8c024160c1a0990bae85f4bcc2f ] Add the "memory" clobber to the EMODPE and EACCEPT asm blocks to tell the compiler the assembly code accesses to the secinfo struct. This ensures the compiler treats the asm block as a memory barrier and the write to secinfo will be visible to ENCLU. Fixes: 20404a808593 ("selftests/sgx: Add test for EPCM permission changes") Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Kai Huang <kai.huang@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/all/20231005153854.25566-4-jo.vanbulck%40cs.kuleuven.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25selftests/sgx: Fix uninitialized pointer dereferences in encl_get_entryJo Van Bulck
[ Upstream commit b84fc2e0139ba4b23b8039bd7cfd242894fe8f8b ] Ensure sym_tab and sym_names are zero-initialized and add an early-out condition in the unlikely (erroneous) case that the enclave ELF file would not contain a symbol table. This addresses -Werror=maybe-uninitialized compiler warnings for gcc -O2. Fixes: 33c5aac3bf32 ("selftests/sgx: Test complete changing of page type flow") Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/all/20231005153854.25566-3-jo.vanbulck%40cs.kuleuven.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25selftests/sgx: Fix uninitialized pointer dereference in error pathJo Van Bulck
[ Upstream commit 79eba8c924f7decfa71ddf187d38cb9f5f2cd7b3 ] Ensure ctx is zero-initialized, such that the encl_measure function will not call EVP_MD_CTX_destroy with an uninitialized ctx pointer in case of an early error during key generation. Fixes: 2adcba79e69d ("selftests/x86: Add a selftest for SGX") Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Acked-by: Kai Huang <kai.huang@intel.com> Link: https://lore.kernel.org/all/20231005153854.25566-2-jo.vanbulck%40cs.kuleuven.be Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25selftests/bpf: Add assert for user stacks in test_task_stackJordan Rome
commit 727a92d62fd6a382b4c5972008e45667e707b0e4 upstream. This is a follow up to: commit b8e3a87a627b ("bpf: Add crosstask check to __bpf_get_stack"). This test ensures that the task iterator only gets a single user stack (for the current task). Signed-off-by: Jordan Rome <linux@jordanrome.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/bpf/20231112023010.144675-1-linux@jordanrome.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-25kselftest/alsa - mixer-test: Fix the print format specifier warningMirsad Todorovac
[ Upstream commit 3f47c1ebe5ca9c5883e596c7888dec4bec0176d8 ] The GCC 13.2.0 compiler issued the following warning: mixer-test.c: In function ‘ctl_value_index_valid’: mixer-test.c:322:79: warning: format ‘%lld’ expects argument of type ‘long long int’, \ but argument 5 has type ‘long int’ [-Wformat=] 322 | ksft_print_msg("%s.%d value %lld more than maximum %lld\n", | ~~~^ | | | long long int | %ld 323 | ctl->name, index, int64_val, 324 | snd_ctl_elem_info_get_max(ctl->info)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | | long int Fixing the format specifier as advised by the compiler suggestion removes the warning. Fixes: 3f48b137d88e7 ("kselftest: alsa: Factor out check that values meet constraints") Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-sound@vger.kernel.org Cc: linux-kselftest@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20240107173704.937824-3-mirsad.todorovac@alu.unizg.hr Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25kselftest/alsa - mixer-test: fix the number of parameters to ↵Mirsad Todorovac
ksft_exit_fail_msg() [ Upstream commit 8c51c13dc63d46e754c44215eabc0890a8bd9bfb ] Minor fix in the number of arguments to error reporting function in the test program as reported by GCC 13.2.0 warning. mixer-test.c: In function ‘find_controls’: mixer-test.c:169:44: warning: too many arguments for format [-Wformat-extra-args] 169 | ksft_exit_fail_msg("snd_ctl_poll_descriptors() failed for %d\n", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The number of arguments in call to ksft_exit_fail_msg() doesn't correspond to the format specifiers, so this is adjusted resembling the sibling calls to the error function. Fixes: b1446bda56456 ("kselftest: alsa: Check for event generation when we write to controls") Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Shuah Khan <shuah@kernel.org> Cc: linux-sound@vger.kernel.org Cc: linux-kselftest@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr> Acked-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20240107173704.937824-2-mirsad.todorovac@alu.unizg.hr Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25selftests/net: fix grep checking for fib_nexthop_multiprefixHangbin Liu
[ Upstream commit a33e9da3470499e9ff476138f271fb52d6bfe767 ] When running fib_nexthop_multiprefix test I saw all IPv6 test failed. e.g. ]# ./fib_nexthop_multiprefix.sh TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ] TEST: IPv6: host 0 to host 1, mtu 1300 [FAIL] With -v it shows COMMAND: ip netns exec h0 /usr/sbin/ping6 -s 1350 -c5 -w5 2001:db8:101::1 PING 2001:db8:101::1(2001:db8:101::1) 1350 data bytes From 2001:db8:100::64 icmp_seq=1 Packet too big: mtu=1300 --- 2001:db8:101::1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms Route get 2001:db8:101::1 via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 metric 1024 expires 599sec mtu 1300 pref medium Searching for: 2001:db8:101::1 from :: via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 .* mtu 1300 The reason is when CONFIG_IPV6_SUBTREES is not enabled, rt6_fill_node() will not put RTA_SRC info. After fix: ]# ./fib_nexthop_multiprefix.sh TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ] TEST: IPv6: host 0 to host 1, mtu 1300 [ OK ] Fixes: 735ab2f65dce ("selftests: Add test with multiple prefixes using single nexthop") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20231213060856.4030084-7-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25selftests/bpf: Relax time_tai test for equal timestamps in tai_forwardYiFei Zhu
[ Upstream commit e1ba7f64b192f083b4423644be03bb9e3dc8ae84 ] We're observing test flakiness on an arm64 platform which might not have timestamps as precise as x86. The test log looks like: test_time_tai:PASS:tai_open 0 nsec test_time_tai:PASS:test_run 0 nsec test_time_tai:PASS:tai_ts1 0 nsec test_time_tai:PASS:tai_ts2 0 nsec test_time_tai:FAIL:tai_forward unexpected tai_forward: actual 1702348135471494160 <= expected 1702348135471494160 test_time_tai:PASS:tai_gettime 0 nsec test_time_tai:PASS:tai_future_ts1 0 nsec test_time_tai:PASS:tai_future_ts2 0 nsec test_time_tai:PASS:tai_range_ts1 0 nsec test_time_tai:PASS:tai_range_ts2 0 nsec #199 time_tai:FAIL This patch changes ASSERT_GT to ASSERT_GE in the tai_forward assertion so that equal timestamps are permitted. Fixes: 64e15820b987 ("selftests/bpf: Add BPF-helper test for CLOCK_TAI access") Signed-off-by: YiFei Zhu <zhuyifei@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20231212182911.3784108-1-zhuyifei@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25selftests/net: specify the interface when do arpingHangbin Liu
[ Upstream commit 7f770d28f2e5abfd442ad689ba1129dd66593529 ] When do arping, the interface need to be specified. Or we will get error: Interface "lo" is not ARPable. And the test failed. ]# ./arp_ndisc_untracked_subnets.sh TEST: test_arp: accept_arp=0 [ OK ] TEST: test_arp: accept_arp=1 [FAIL] TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ] TEST: test_arp: accept_arp=2 same_subnet=1 [FAIL] After fix: ]# ./arp_ndisc_untracked_subnets.sh TEST: test_arp: accept_arp=0 [ OK ] TEST: test_arp: accept_arp=1 [ OK ] TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ] TEST: test_arp: accept_arp=2 same_subnet=1 [ OK ] Fixes: 0ea7b0a454ca ("selftests: net: arp_ndisc_untracked_subnets: test for arp_accept and accept_untracked_na") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25selftests/bpf: Fix erroneous bitmask operationJeroen van Ingen Schenau
[ Upstream commit b6a3451e0847d5d70fb5fa2b2a80ab9f80bf2c7b ] xdp_synproxy_kern.c is a BPF program that generates SYN cookies on allowed TCP ports and sends SYNACKs to clients, accelerating synproxy iptables module. Fix the bitmask operation when checking the status of an existing conntrack entry within tcp_lookup() function. Do not AND with the bit position number, but with the bitmask value to check whether the entry found has the IPS_CONFIRMED flag set. Fixes: fb5cd0ce70d4 ("selftests/bpf: Add selftests for raw syncookie helpers") Signed-off-by: Jeroen van Ingen Schenau <jeroen.vaningenschenau@novoserve.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Minh Le Hoang <minh.lehoang@novoserve.com> Link: https://lore.kernel.org/xdp-newbies/CAAi1gX7owA+Tcxq-titC-h-KPM7Ri-6ZhTNMhrnPq5gmYYwKow@mail.gmail.com/T/#u Link: https://lore.kernel.org/bpf/20231130120353.3084-1-jeroen.vaningenschenau@novoserve.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-25selftests/powerpc: Fix error handling in FPU/VMX preemption testsMichael Ellerman
[ Upstream commit 9dbd5927408c4a0707de73ae9dd9306b184e8fee ] The FPU & VMX preemption tests do not check for errors returned by the low-level asm routines, preempt_fpu() / preempt_vsx() respectively. That means any register corruption detected by the asm routines does not result in a test failure. Fix it by returning the return value of the asm routines from the pthread child routines. Fixes: e5ab8be68e44 ("selftests/powerpc: Test preservation of FPU and VMX regs across preemption") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231128132748.1990179-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-20kselftest: alsa: fixed a print formatting warningGhanshyam Agrawal
[ Upstream commit 13d605e32e4cfdedcecdf3d98d21710ffe887708 ] A statement used %d print formatter where %s should have been used. The same has been fixed in this commit. Signed-off-by: Ghanshyam Agrawal <ghanshyam1898@gmail.com> Link: 5aaf9efffc57 ("kselftest: alsa: Add simplistic test for ALSA mixer controls kselftest") Link: https://lore.kernel.org/r/20231217080019.1063476-1-ghanshyam1898@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-10selftests: mptcp: set FAILING_LINKS in run_testsGeliang Tang
[ Upstream commit be7e9786c9155c2942cd53b813e4723be67e07c4 ] Set FAILING_LINKS as an env var with a limited scope only when calling run_tests(). Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-3-a883213c8ba9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 7cefbe5e1dac ("selftests: mptcp: fix fastclose with csum failure") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-10selftests: mptcp: fix fastclose with csum failurePaolo Abeni
[ Upstream commit 7cefbe5e1dacc7236caa77e9d072423f21422fe2 ] Running the mp_join selftest manually with the following command line: ./mptcp_join.sh -z -C leads to some failures: 002 fastclose server test # ... rtx [fail] got 1 MP_RST[s] TX expected 0 # ... rstrx [fail] got 1 MP_RST[s] RX expected 0 The problem is really in the wrong expectations for the RST checks implied by the csum validation. Note that the same check is repeated explicitly in the same test-case, with the correct expectation and pass successfully. Address the issue explicitly setting the correct expectation for the failing checks. Reported-by: Xiumei Mu <xmu@redhat.com> Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-5-7b9cd6a7b7f4@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-10bpf: handle ldimm64 properly in check_cfg()Andrii Nakryiko
[ Upstream commit 3feb263bb516ee7e1da0acd22b15afbb9a7daa19 ] ldimm64 instructions are 16-byte long, and so have to be handled appropriately in check_cfg(), just like the rest of BPF verifier does. This has implications in three places: - when determining next instruction for non-jump instructions; - when determining next instruction for callback address ldimm64 instructions (in visit_func_call_insn()); - when checking for unreachable instructions, where second half of ldimm64 is expected to be unreachable; We take this also as an opportunity to report jump into the middle of ldimm64. And adjust few test_verifier tests accordingly. Acked-by: Eduard Zingerman <eddyz87@gmail.com> Reported-by: Hao Sun <sunhao.th@gmail.com> Fixes: 475fb78fbf48 ("bpf: verifier (add branch/goto checks)") Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20231110002638.4168352-2-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-10selftests: secretmem: floor the memory size to the multiple of page_sizeMuhammad Usama Anjum
[ Upstream commit 0aac13add26d546ac74c89d2883b3a5f0fbea039 ] The "locked-in-memory size" limit per process can be non-multiple of page_size. The mmap() fails if we try to allocate locked-in-memory with same size as the allowed limit if it isn't multiple of the page_size because mmap() rounds off the memory size to be allocated to next multiple of page_size. Fix this by flooring the length to be allocated with mmap() to the previous multiple of the page_size. This was getting triggered on KernelCI regularly because of different ulimit settings which wasn't multiple of the page_size. Find logs here: https://linux.kernelci.org/test/plan/id/657654bd8e81e654fae13532/ The bug in was present from the time test was first added. Link: https://lkml.kernel.org/r/20231214101931.1155586-1-usama.anjum@collabora.com Fixes: 76fe17ef588a ("secretmem: test: add basic selftest for memfd_secret(2)") Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Reported-by: "kernelci.org bot" <bot@kernelci.org> Closes: https://linux.kernelci.org/test/plan/id/657654bd8e81e654fae13532/ Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Shuah Khan <shuah@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-10selftests: bonding: do not set port down when adding to bondHangbin Liu
[ Upstream commit 61fa2493ca76fd7bb74e13f0205274f4ab0aa696 ] Similar to commit be809424659c ("selftests: bonding: do not set port down before adding to bond"). The bond-arp-interval-causes-panic test failed after commit a4abfa627c38 ("net: rtnetlink: Enslave device before bringing it up") as the kernel will set the port down _after_ adding to bond if setting port down specifically. Fix it by removing the link down operation when adding to bond. Fixes: 2ffd57327ff1 ("selftests: bonding: cause oops in bond_rr_gen_slave_id") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Tested-by: Benjamin Poirier <benjamin.poirier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-01selftests: mptcp: join: fix subflow_send_ack lookupGeliang Tang
[ Upstream commit c8f021eec5817601dbd25ab7e3ad5c720965c688 ] MPC backups tests will skip unexpected sometimes (For example, when compiling kernel with an older version of gcc, such as gcc-8), since static functions like mptcp_subflow_send_ack also be listed in /proc/kallsyms, with a 't' in front of it, not 'T' ('T' is for a global function): > grep "mptcp_subflow_send_ack" /proc/kallsyms 0000000000000000 T __pfx___mptcp_subflow_send_ack 0000000000000000 T __mptcp_subflow_send_ack 0000000000000000 t __pfx_mptcp_subflow_send_ack 0000000000000000 t mptcp_subflow_send_ack In this case, mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$" will be false, MPC backups tests will skip. This is not what we expected. The correct logic here should be: if mptcp_subflow_send_ack is not a global function in /proc/kallsyms, do these MPC backups tests. So a 'T' must be added in front of mptcp_subflow_send_ack. Fixes: 632978f0a961 ("selftests: mptcp: join: skip MPC backups tests if not supported") Cc: stable@vger.kernel.org Signed-off-by: Geliang Tang <geliang.tang@linux.dev> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20selftests/bpf: fix bpf_loop_bench for new callback verification schemeEduard Zingerman
[ Upstream commit f40bfd1679446b22d321e64a1fa98b7d07d2be08 ] This is a preparatory change. A follow-up patch "bpf: verify callbacks as if they are called unknown number of times" changes logic for callbacks handling. While previously callbacks were verified as a single function call, new scheme takes into account that callbacks could be executed unknown number of times. This has dire implications for bpf_loop_bench: SEC("fentry/" SYS_PREFIX "sys_getpgid") int benchmark(void *ctx) { for (int i = 0; i < 1000; i++) { bpf_loop(nr_loops, empty_callback, NULL, 0); __sync_add_and_fetch(&hits, nr_loops); } return 0; } W/o callbacks change verifier sees it as a 1000 calls to empty_callback(). However, with callbacks change things become exponential: - i=0: state exploring empty_callback is scheduled with i=0 (a); - i=1: state exploring empty_callback is scheduled with i=1; ... - i=999: state exploring empty_callback is scheduled with i=999; - state (a) is popped from stack; - i=1: state exploring empty_callback is scheduled with i=1; ... Avoid this issue by rewriting outer loop as bpf_loop(). Unfortunately, this adds a function call to a loop at runtime, which negatively affects performance: throughput latency before: 149.919 ± 0.168 M ops/s, 6.670 ns/op after : 137.040 ± 0.187 M ops/s, 7.297 ns/op Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20231121020701.26440-4-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-08selftests/net: mptcp: fix uninitialized variable warningsWillem de Bruijn
[ Upstream commit 00a4f8fd9c750f20d8fd4535c71c9caa7ef5ff2f ] Same init_rng() in both tests. The function reads /dev/urandom to initialize srand(). In case of failure, it falls back onto the entropy in the uninitialized variable. Not sure if this is on purpose. But failure reading urandom should be rare, so just fail hard. While at it, convert to getrandom(). Which man 4 random suggests is simpler and more robust. mptcp_inq.c:525:6: mptcp_connect.c:1131:6: error: variable 'foo' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] Fixes: 048d19d444be ("mptcp: add basic kselftest for mptcp") Fixes: b51880568f20 ("selftests: mptcp: add inq test case") Cc: Florian Westphal <fw@strlen.de> Signed-off-by: Willem de Bruijn <willemb@google.com> ---- When input is randomized because this is expected to meaningfully explore edge cases, should we also add 1. logging the random seed to stdout and 2. adding a command line argument to replay from a specific seed I can do this in net-next, if authors find it useful in this case. Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Link: https://lore.kernel.org/r/20231124171645.1011043-5-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-08selftests/net: unix: fix unused variable compiler warningWillem de Bruijn
[ Upstream commit 59fef379d453781f0dabfa1f1a1e86e78aee919a ] Remove an unused variable. diag_uid.c:151:24: error: unused variable 'udr' [-Werror,-Wunused-variable] Fixes: ac011361bd4f ("af_unix: Add test for sock_diag and UDIAG_SHOW_UID.") Signed-off-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20231124171645.1011043-4-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-08selftests/net: fix a char signedness issueWillem de Bruijn
[ Upstream commit 7b29828c5af6841bdeb9fafa32fdfeff7ab9c407 ] Signedness of char is signed on x86_64, but unsigned on arm64. Fix the warning building cmsg_sender.c on signed platforms or forced with -fsigned-char: msg_sender.c:455:12: error: implicit conversion from 'int' to 'char' changes value from 128 to -128 [-Werror,-Wconstant-conversion] buf[0] = ICMPV6_ECHO_REQUEST; constant ICMPV6_ECHO_REQUEST is 128. Link: https://lwn.net/Articles/911914 Fixes: de17e305a810 ("selftests: net: cmsg_sender: support icmp and raw sockets") Signed-off-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20231124171645.1011043-3-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-08selftests/net: ipsec: fix constant out of rangeWillem de Bruijn
[ Upstream commit 088559815477c6f623a5db5993491ddd7facbec7 ] Fix a small compiler warning. nr_process must be a signed long: it is assigned a signed long by strtol() and is compared against LONG_MIN and LONG_MAX. ipsec.c:2280:65: error: result of comparison of constant -9223372036854775808 with expression of type 'unsigned int' is always false [-Werror,-Wtautological-constant-out-of-range-compare] if ((errno == ERANGE && (nr_process == LONG_MAX || nr_process == LONG_MIN)) Fixes: bc2652b7ae1e ("selftest/net/xfrm: Add test for ipsec tunnel") Signed-off-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com> Link: https://lore.kernel.org/r/20231124171645.1011043-2-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28cxl/region: Fix x1 root-decoder granularity calculationsJim Harris
[ Upstream commit 98a04c7aced2b43b3ac4befe216c4eecc7257d4b ] Root decoder granularity must match value from CFWMS, which may not be the region's granularity for non-interleaved root decoders. So when calculating granularities for host bridge decoders, use the region's granularity instead of the root decoder's granularity to ensure the correct granularities are set for the host bridge decoders and any downstream switch decoders. Test configuration is 1 host bridge * 2 switches * 2 endpoints per switch. Region created with 2048 granularity using following command line: cxl create-region -m -d decoder0.0 -w 4 mem0 mem2 mem1 mem3 \ -g 2048 -s 2048M Use "cxl list -PDE | grep granularity" to get a view of the granularity set at each level of the topology. Before this patch: "interleave_granularity":2048, "interleave_granularity":2048, "interleave_granularity":512, "interleave_granularity":2048, "interleave_granularity":2048, "interleave_granularity":512, "interleave_granularity":256, After: "interleave_granularity":2048, "interleave_granularity":2048, "interleave_granularity":4096, "interleave_granularity":2048, "interleave_granularity":2048, "interleave_granularity":4096, "interleave_granularity":2048, Fixes: 27b3f8d13830 ("cxl/region: Program target lists") Cc: <stable@vger.kernel.org> Signed-off-by: Jim Harris <jim.harris@samsung.com> Link: https://lore.kernel.org/r/169824893473.1403938.16110924262989774582.stgit@bgt-140510-bm03.eng.stellus.in [djbw: fixup the prebuilt cxl_test region] Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28tools/testing/cxl: Define a fixed volatile configuration to parseDan Williams
[ Upstream commit 3d8f7ccaa611a743ae3a1e6f605346993d37c513 ] Take two endpoints attached to the first switch on the first host-bridge in the cxl_test topology and define a pre-initialized region. This is a x2 interleave underneath a x1 CXL Window. $ modprobe cxl_test $ # cxl list -Ru { "region":"region3", "resource":"0xf010000000", "size":"512.00 MiB (536.87 MB)", "interleave_ways":2, "interleave_granularity":4096, "decode_state":"commit" } Tested-by: Fan Ni <fan.ni@samsung.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/167602000547.1924368.11613151863880268868.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> Stable-dep-of: 98a04c7aced2 ("cxl/region: Fix x1 root-decoder granularity calculations") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28selftests/resctrl: Reduce failures due to outliers in MBA/MBM testsIlpo Järvinen
commit ef43c30858754d99373a63dff33280a9969b49bc upstream. The initial value of 5% chosen for the maximum allowed percentage difference between resctrl mbm value and IMC mbm value in commit 06bd03a57f8c ("selftests/resctrl: Fix MBA/MBM results reporting format") was "randomly chosen value" (as admitted by the changelog). When running tests in our lab across a large number platforms, 5% difference upper bound for success seems a bit on the low side for the MBA and MBM tests. Some platforms produce outliers that are slightly above that, typically 6-7%, which leads MBA/MBM test frequently failing. Replace the "randomly chosen value" with a success bound that is based on those measurements across large number of platforms by relaxing the MBA/MBM success bound to 8%. The relaxed bound removes the failures due the frequent outliers. Fixed commit description style error during merge: Shuah Khan <skhan@linuxfoundation.org> Fixes: 06bd03a57f8c ("selftests/resctrl: Fix MBA/MBM results reporting format") Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28selftests/resctrl: Move _GNU_SOURCE define into MakefileIlpo Järvinen
commit 3a1e4a91aa454a1c589a9824d54179fdbfccde45 upstream. _GNU_SOURCE is defined in resctrl.h. Defining _GNU_SOURCE has a large impact on what gets defined when including headers either before or after it. This can result in compile failures if .c file decides to include a standard header file before resctrl.h. It is safer to define _GNU_SOURCE in Makefile so it is always defined regardless of in which order includes are done. Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28selftests/resctrl: Remove duplicate feature check from CMT testIlpo Järvinen
commit 030b48fb2cf045dead8ee2c5ead560930044c029 upstream. The test runner run_cmt_test() in resctrl_tests.c checks for CMT feature and does not run cmt_resctrl_val() if CMT is not supported. Then cmt_resctrl_val() also check is CMT is supported. Remove the duplicated feature check for CMT from cmt_resctrl_val(). Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28selftests/efivarfs: create-read: fix a resource leakzhujun2
[ Upstream commit 3f6f8a8c5e11a9b384a36df4f40f0c9a653b6975 ] The opened file should be closed in main(), otherwise resource leak will occur that this problem was discovered by code reading Signed-off-by: zhujun2 <zhujun2@cmss.chinamobile.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28selftests/lkdtm: Disable CONFIG_UBSAN_TRAP in test configRicardo Cañuelo
[ Upstream commit cf77bf698887c3b9ebed76dea492b07a3c2c7632 ] The lkdtm selftest config fragment enables CONFIG_UBSAN_TRAP to make the ARRAY_BOUNDS test kill the calling process when an out-of-bound access is detected by UBSAN. However, after this [1] commit, UBSAN is triggered under many new scenarios that weren't detected before, such as in struct definitions with fixed-size trailing arrays used as flexible arrays. As a result, CONFIG_UBSAN_TRAP=y has become a very aggressive option to enable except for specific situations. `make kselftest-merge` applies CONFIG_UBSAN_TRAP=y to the kernel config for all selftests, which makes many of them fail because of system hangs during boot. This change removes the config option from the lkdtm kselftest and configures the ARRAY_BOUNDS test to look for UBSAN reports rather than relying on the calling process being killed. [1] commit 2d47c6956ab3 ("ubsan: Tighten UBSAN_BOUNDS on GCC")' Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Reviewed-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20230802063252.1917997-1-ricardo.canuelo@collabora.com Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20selftests: pmtu.sh: fix result checkingHangbin Liu
[ Upstream commit 63e201916b27260218e528a2f8758be47f99bbf4 ] In the PMTU test, when all previous tests are skipped and the new test passes, the exit code is set to 0. However, the current check mistakenly treats this as an assignment, causing the check to pass every time. Consequently, regardless of how many tests have failed, if the latest test passes, the PMTU test will report a pass. Fixes: 2a9d3716b810 ("selftests: pmtu.sh: improve the test result processing") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20selftests/resctrl: Ensure the benchmark commands fits to its arrayIlpo Järvinen
[ Upstream commit 4a28c7665c2a1ac0400864eabb0c641e135f61aa ] Benchmark command is copied into an array in the stack. The array is BENCHMARK_ARGS items long but the command line could try to provide a longer command. Argument size is also fixed by BENCHMARK_ARG_SIZE (63 bytes of space after fitting the terminating \0 character) and user could have inputted argument longer than that. Return error in case the benchmark command does not fit to the space allocated for it. Fixes: ecdbb911f22d ("selftests/resctrl: Add MBM test") Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Tested-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Reviewed-by: Shaopeng Tan <tan.shaopeng@jp.fujitsu.com> Reviewed-by: "Wieczor-Retman, Maciej" <maciej.wieczor-retman@intel.com> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20selftests/pidfd: Fix ksft print formatsMaciej Wieczor-Retman
[ Upstream commit 4d7f4e8158b62f63031510cdc24acc520956c091 ] Compiling pidfd selftest after adding a __printf() attribute to ksft_print_msg() and ksft_test_result_pass() exposes -Wformat warnings in error_report(), test_pidfd_poll_exec_thread(), child_poll_exec_test(), test_pidfd_poll_leader_exit_thread(), child_poll_leader_exit_test(). The ksft_test_result_pass() in error_report() expects a string but doesn't provide any argument after the format string. All the other calls to ksft_print_msg() in the functions mentioned above have format strings that don't match with other passed arguments. Fix format specifiers so they match the passed variables. Add a missing variable to ksft_test_result_pass() inside error_report() so it matches other cases in the switch statement. Fixes: 2def297ec7fb ("pidfd: add tests for NSpid info in fdinfo") Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20net: skb_find_text: Ignore patterns extending past 'to'Phil Sutter
[ Upstream commit c4eee56e14fe001e1cff54f0b438a5e2d0dd7454 ] Assume that caller's 'to' offset really represents an upper boundary for the pattern search, so patterns extending past this offset are to be rejected. The old behaviour also was kind of inconsistent when it comes to fragmentation (or otherwise non-linear skbs): If the pattern started in between 'to' and 'from' offsets but extended to the next fragment, it was not found if 'to' offset was still within the current fragment. Test the new behaviour in a kselftest using iptables' string match. Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org> Fixes: f72b948dcbb8 ("[NET]: skb_find_text ignores to argument") Signed-off-by: Phil Sutter <phil@nwl.cc> Reviewed-by: Florian Westphal <fw@strlen.de> Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-05-31 08:16:09 +0000