| Age | Commit message (Collapse) | Author |
|---|
|
In the pcm512x chipset driver, pcm512x_overclock_xxx_put() is defined as
a general mixer kcontrol instead of a DAPM kcontrol, so struct
snd_soc_dapm_context must not be accessed via
snd_soc_dapm_kcontrol_to_dapm().
This causes a NULL pointer dereference, so it must be modified to use
snd_soc_component_to_dapm().
Cc: stable@kernel.org
Closes: https://github.com/raspberrypi/linux/issues/7242
Fixes: 02dbbb7e982a ("ASoC: codecs: pcm512x: convert to snd_soc_dapm_xxx()")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Link: https://patch.msgid.link/20260521113712.227438-1-aha310510@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For PTL onwards Cirrus are intending to rely on function topologies,
rather than using a match table for each system type. Remove this
unnecessary match table entry. Having the match entries can
mean that systems match when they should use function topologies
instead, resulting in incorrect audio configurations. Although,
admittedly this is not too likely with this 6x amp configuration
as those are quite rare, but best to follow best practice.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260520163631.3300102-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
For PTL onwards Cirrus are intending to rely on function
topologies, rather than using a match table for each system
type. Chrome systems tend to have custom magic in the topology
and thus need to load a specific file. This causes problems as
these system can have the same layout as generic laptops causing
the match to apply to other laptops. Add a DMI quirk that forces
these matches to only apply to specific devices.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260520163631.3300102-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Adding ES83x6 I2S codec support for NVL platforms and entry in match table.
Signed-off-by: Balamurugan C <balamurugan.c@intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260520061143.2024963-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add an entry in the soundwire quirk table for novalake boards to support
NVL RVP
Signed-off-by: Jairaj Arava <jairaj.arava@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260520060814.2024852-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Richard Fitzgerald <rf@opensource.cirrus.com> says:
This series fixes bugs and a typo in cs-amp-lib.
Link: https://patch.msgid.link/20260521122511.987322-1-rf@opensource.cirrus.com
|
|
Fix the error message in cs_amp_read_cal_coeff() to say "Failed to read".
It was incorrectly "Failed to write", probably a copy-paste error.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260521122511.987322-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Rewrite cs_amp_create_debugfs() so that dput() will be called on
a valid dentry returned from debugfs_lookup().
The pointer returned from debugfs_lookup() must be released by dput().
The pointer returned from debugfs_create_dir() does not need to be
passed to dput().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: cdd27fa3298a ("ASoC: cs-amp-lib: Add helpers for factory calibration")
Link: https://patch.msgid.link/20260521122511.987322-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When calculating data->count replace the incorrect sizeof(data) with use
of struct_offset().
The faulty sizeof(data) was incorrectly calculating the size of the
pointer instead of the size of the struct pointed to. As it happens, both
values are 8 on a 64-bit CPU. In the unlikely event of using this code on
a 32-bit CPU the number of available bytes would be calculated 4 larger
than is actually available.
Instead of changing to sizeof(*data) it has been replaced by
struct_offset() because it has better chance of detecting these sorts of
typos. Also the offset of the data[] array is actually what we want to know
here anyway.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2b62e66626f0 ("ASoC: cs-amp-lib: Add function to write calibration to UEFI")
Link: https://patch.msgid.link/20260521122511.987322-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use flush_work() instead of cancel_work_sync() to terminate pending IRQ
work in cs35l56_sdw_remove(). And flush_work() again after masking the
interrupts to flush any queueing that was racing with the masking. This is
the same sequence as cs35l56_sdw_system_suspend().
cs35l56_sdw_interrupt() takes the pm_runtime to prevent the bus powering-
down before the interrupt status can be read and handled. The work releases
this pm_runtime. So cancelling it, instead of flushing, could leave an
unbalanced pm_runtime.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://patch.msgid.link/20260521123057.988732-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The default case in snd_soc_ret() use va_start without va_end to
cleanup "args" object which can cause undefined behavior. So, add
missing va_end to cleanup "args" object.
This is reported by Coverity Scan as "Missing varargs init or cleanup".
Fixes: 943116ba2a6a ("ASoC: add common snd_soc_ret() and use it")
Signed-off-by: Robertus Diawan Chris <robertusdchris@gmail.com>
Link: https://patch.msgid.link/20260519054024.274741-1-robertusdchris@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When the SAI peripheral is left in a running state by the bootloader,
the driver can experience an interrupt storm during probe that prevents
successful initialization. This occurs because the current code registers
the IRQ handler before resetting the hardware to a known state.
The issue manifests as:
- Continuous interrupts firing immediately after devm_request_irq()
- Driver probe failure or system hang
- Error messages about unhandled interrupts
This is particularly problematic on systems where U-Boot or other
bootloaders enable SAI for boot-time audio feedback or diagnostics
and don't properly disable it before handing control to Linux.
Fix this by reordering the probe sequence:
1. Add fsl_sai_reset_hw() to clear TCSR/RCSR control registers,
which disables the transmitter/receiver and all interrupt sources
2. Move devm_request_irq() to after hardware initialization
This ensures the SAI is in a clean reset state before the interrupt
handler can be invoked, preventing the storm while maintaining proper
error handling and cleanup paths.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20260512065252.75859-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The ASUS Zenbook S16 (UM5606GA) with AMD Ryzen AI 9 465 (Strix Point,
ACP 7.0) has a BIOS that incorrectly sets the ACPI property
'acp-audio-config-flag' to 0x10 (FLAG_AMD_LEGACY_ONLY_DMIC) for the ACP
device. This prevents snd_pci_ps from probing the SoundWire bus, resulting
in no internal audio (dummy output only).
The hardware uses a Cirrus Logic CS42L43 (headphone/jack) and four CS35L56
smart amplifiers (speakers), all on SoundWire link 1. The corresponding
machine table entry (acp70_cs42l43_l1u0_cs35l56x4_l1u0123) already exists
in amd-acp70-acpi-match.c and correctly describes this topology.
Add a DMI quirk to override the flag to 0, consistent with the existing
entry for the HN7306EA.
Signed-off-by: Jasper Smet <josbeir@gmail.com>
Link: https://patch.msgid.link/20260513052137.56703-1-josbeir@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
devm_kasprintf() can fail and return NULL. The legacy AMD SoundWire
machine driver logs cpus->dai_name before checking the allocation result.
Move the debug print after the NULL check, matching the ordering used by
the SOF AMD SoundWire path after commit 5726b68473f7 ("ASoC: amd/sdw_utils:
avoid NULL deref when devm_kasprintf() fails").
Fixes: 2981d9b0789c ("ASoC: amd: acp: add soundwire machine driver for legacy stack")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260511-asoc-amd-acp-sdw-legacy-dai-name-null-v1-1-dc6151b6da8a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some Old DSP firmware versions use 32-bit address arithmetic and size for
validating the PCM buffer address range. If a buffer is allocated near
the top of the 32-bit address space, arithmetic calculations involving
the end address can overflow and fail checks.
Work around this by increasing the preallocated PCM buffer size by one
page. The DSP is still passed the usable buffer size, excluding the extra
page, which prevents the firmware from seeing an end address that crosses
the 32-bit boundary.
This was not hit before because PCM buffer allocation and DSP-side
mapping happened at different points, and the size mapped on the DSP was
usually nperiods * period_size. Therefore the mapped size was unlikely to
match the full preallocated buffer size exactly, although the issue was
still possible. With early buffer mapping on the DSP, the full
preallocated buffer is mapped during PCM creation, making the failure
reproducible at boot.
Fixes: 8ea6e25c8536 ("ASoC: qcom: q6apm: Add support for early buffer mapping on DSP")
Cc: Stable@vger.kernel.org
Reported-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Closes: https://lore.kernel.org/all/7f10abbd-fb78-4c3a-ab90-7ca78239891a@oldschoolsolutions.biz/
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Link: https://patch.msgid.link/20260514090607.2435484-1-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In fs210x_effect_scene_info(), a string was copied like this:
strscpy(DST, SRC, strlen(SRC) + 1);
A buffer overflow would happen if strlen(SRC) >= sizeof(DST).
Actually, strscpy() must be used this way:
strscpy(DST, SRC, sizeof(DST));
strscpy(DST, SRC); // defaults to sizeof(DST)
Fixes: 756117701779 ("ASoC: codecs: Add FourSemi FS2104/5S audio amplifier driver")
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://patch.msgid.link/20260513190852.196723-2-grandmaster@al2klimov.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The SoundWire slave update_status() callback can be invoked when the
status has not changed. To prevent large amounts of log noise with debug
enabled, log them only when the status changes. This also helps with
understanding them, because they now log an actual change in state.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260514151854.695145-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
clk_get_parent() returns NULL when the clock has no parent (or when the
input clk is NULL); it never returns an ERR_PTR. The current IS_ERR(mux)
check therefore never triggers - a NULL return falls through silently
to clk_set_parent(NULL, parent_clk), which simply fails with -EINVAL.
Use a NULL check so the dedicated error path runs and the prior
clk_get() reference is released via clk_put().
Signed-off-by: Ingyu Jang <ingyujang25@korea.ac.kr>
Acked-by: Sen Wang <sen@ti.com>
Link: https://patch.msgid.link/20260514185215.3753998-1-ingyujang25@korea.ac.kr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
First of all, it has to be 'default n' (small letter n), otherwise
it looks for CONFIG_N which is absent and in case of appearance
will enable something unrelated. Second and most important is that
'n' *is* the default 'default' already. Hence just drop malformed
line.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260513162612.365729-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
devm_kasprintf() can fail while building the temporary speaker
component string. If that happens, spk_components is set to NULL, but
the current code can still pass it to strlen() on a later loop iteration
or after the loop when appending the speaker component list to
card->components.
Use NULL to represent the initial "no speaker components" state, and
return -ENOMEM immediately if building spk_components fails.
Fixes: 0f60ecffbfe3 ("ASoC: sdw_utils: generate combined spk components string")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260512-asoc-sdw-utils-spk-components-alloc-v1-1-c9bbd6d2e123@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In cs35l56_dsp_work() check that the request for runtime-resume was
successful instead of assuming that it can't fail.
We may as well do this using the new PM_RUNTIME_ACQUIRE*() macros and
remove the manual pm_runtime_put_autosuspend() and associated gotos.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260511114239.44970-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The smn_read_register() helper returns negative error codes on failure
or the register value on success. When used with read_poll_timeout(),
the return value is stored in the 'data' variable.
Currently 'data' is declared as u32, which causes negative error codes
to be cast to large positive values. This makes the condition 'data > 0'
incorrectly treat errors as success.
Fix by changing 'data' from u32 to int, matching the pattern used in
psp_mbox_ready() which correctly handles the same helper function.
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/linux-sound/agGES8vWrLOrBu28@stanley.mountain/
Fixes: f120cf33d232 ("ASoC: SOF: amd: Use AMD_NODE")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260511153638.724810-1-mario.limonciello@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Bard Liao <yung-chuan.liao@linux.intel.com> says:
The RT712 and RT721 codec mic are optional and are not used on some
products. Add a quirk to make it optional and skip the codec mic DAI
when it is not present in DisCo table.
Link: https://patch.msgid.link/20260508093224.1246282-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a quirk to skip the CODEC_MIC DAI when it is not present.
This ensures PCH_DMIC is used as the fallback; otherwise,
CODEC_MIC remains the default.
Fixes: 846a8d3cf3ba ("ASoC: Intel: soc-acpi-intel-ptl-match: Add rt721 support")
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260508093224.1246282-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some devices do not use CODEC_MIC but use the host PCH_DMIC
instead. Add a quirk to skip the CODEC_MIC DAI when it is not present
in disco table, ensuring the correct capture device is used.
If CODEC_MIC is present, it continues to be used as default.
Fixes: 9489db97f6f0 ("ASoC: sdw_utils: add SmartMic DAI for RT712 VB")
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260508093224.1246282-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a SoundWire machine table entry for the LG Gram Pro 2026
(16Z90U-KU7BK), which has an unusual configuration:
sdw:0:1:025d:1320:01 single stereo RT1320 SmartAmp on link 1
sdw:0:3:025d:0713:01 RT713 jack/headset codec on link 3
Existing rt713-rt1320 boards have two RT1320 amps on different links
("link_mask = BIT(1) | BIT(2) | BIT(3)"). The LG Gram uses a single
stereo RT1320 chip, so the new entry uses "link_mask = BIT(1) |
BIT(3)" with the existing rt1320_1_group2_adr structure, leaving the
two-channel routing to the topology.
The RT713 on this board does not expose a SMART_MIC function in
ACPI, so the .machine_check callback used by the existing entries
(snd_soc_acpi_intel_sdca_is_device_rt712_vb) would reject this
board. Drop machine_check for the new entry; speaker output and
the headset jack do not depend on the SMART_MIC presence check.
The corresponding topology source has been submitted to the SOF
project at https://github.com/thesofproject/sof/pull/10760 . The
generated sof-ptl-rt713-l3-rt1320-l1-2ch.tplg and
nhlt-sof-ptl-rt713-l3-rt1320-l1.bin will follow in linux-firmware
once that lands.
Tested on Ubuntu 26.04 with kernel 7.0.0-15: speaker (RT1320
stereo), headphone jack with auto-routing, headset mic, and the
internal NHLT DMIC array all work via the UCM HiFi profile.
Signed-off-by: Jang Pyohwan <vhgksl@daum.net>
Link: https://patch.msgid.link/20260509175317.DnhjxHczQay7kkp5z6t4lg@vhgksl.daum.net
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support for using the rt712 multi-function codec on link 0 and the
rt1320 amplifier on link 3 on ARL platforms.
Signed-off-by: Gary C Wang <gary.c.wang@intel.com>
Co-developed-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260508104239.1247525-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When the SOF device driver enumerates the machine tables,
it selects the entry with the most numbers of matched links in
ascending order.
Align the ordering with commit 08095e20995ad6e3648af7416c90163627fe7e44
("ASoC: Intel: soc-acpi-intel-ptl-match: Sort ACPI link/machine tables").
Signed-off-by: Mac Chiang <mac.chiang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260508104239.1247525-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Richard Fitzgerald <rf@opensource.cirrus.com> says:
Two patches to fix cleanup during driver remove() and the error path
of probe().
The main purpose is to fix cleanup of the workqueue.
|
|
The error path in cs35l56_common_probe() should call destroy_workqueue()
on the workqueue that was created by cs35l56_dsp_init().
Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260505161124.3621000-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Manually call snd_soc_unregister_component() from cs35l56_remove()
instead of using devres cleanup. This ensures that the component is
destroyed before cs35l56_remove() starts cleanup of anything the
component code could be using.
Devres cleanup happens after the driver remove() callback, so if
snd_soc_register_component() is used, it will not be destroyed until
after cs35l56_remove() has returned. But there is some cleanup that
must be done in cs35l56_remove(), or wrapped in a custom devres
cleanup handler to ensure correct ordering. The simplest option is
to call snd_soc_unregister_component() at the start of cs35l56_remove().
Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Closes: https://sashiko.dev/#/patchset/20260501103002.2843735-1-rf%40opensource.cirrus.com
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260505161124.3621000-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Richard Fitzgerald <rf@opensource.cirrus.com> says:
This short series fixes two bugs in wm_adsp_fw_find_test.
|
|
In wm_adsp_fw_find_test_find_firmware_byindex() the content of
priv->searched_fw_files must be cleared before starting the next iteration.
The files searched for are appended to priv->searched_fw_files, so if it is
not cleared on each iteration it will still contain the searches from the
previous iteration.
Fixes: bf2d44d07de7 ("ASoC: wm_adsp: Add kunit test for firmware file search")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260505105123.3539778-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Redirect wm_adsp_release_firmware_files() to a replacement function that
handles the dummy firmware created by the tests. Use the same cleanup
function to cleanup in the test exit() function. Also call it on each
loop in wm_adsp_fw_find_test_find_firmware_byindex() to free the created
strings before reusing priv->found_fw on the next loop.
wm_adsp_release_firmware_files() will pass the struct firmware* pointers
to release_firmware(). But the pointers created by the tests are dummies
and must not be passed to release_firmware().
The test never invokes wm_adsp_release_firmware_files() so it wasn't
redirected. But the error handling in wm_adsp_request_firmware_files()
calls wm_adsp_release_firmware_files(). The redirected function makes
this safe.
Using the same cleanup function to perform cleanup from the test exit()
handler and wm_adsp_fw_find_test_find_firmware_byindex() avoids the risk
of duplicate cleanup code that all needs updating if there is any change
to the cleanup requirements.
This problem was found by https://sashiko.dev.
Fixes: bf2d44d07de7 ("ASoC: wm_adsp: Add kunit test for firmware file search")
Closes: https://sashiko.dev/#/patchset/20260326100853.1582886-1-rf%40opensource.cirrus.com
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260505105123.3539778-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
TAS2770 initialises the temperature readout registers to 0.
This value persists until the chip is fully powered up and
the ADC starts sampling. The ADC then persists the last sampled
temperature during software shutdown.
The ADC should therefore never return 0 in normal operating
conditions, so return -ENODATA and mark it as a fault condition
using HWMON_T_FAULT.
Fixes: ff73e2780169 ("ASoC: tas2770: expose die temp to hwmon")
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The TAS2764 datasheet specifies that the chip initialises the
temperature register such that the temperature reading is 2.6 *C,
ostensibly to prevent tripping the chip's protection circuitry.
The chip is not capable of representing 2.6 *C however, and the
register is actually initialised to 0. The ADC does not start
sampling until the chip is powered up, and the last sampled
temperature persists in the register during software shutdown.
Therefore, any reading returning 0 is almost certain to be
from before the ADC has actually started sampling, meaning that
it is invalid.
Return -ENODATA early if the temperature has not yet been sampled
by the chip, and indicate a fault condition using HWMON_T_FAULT.
Fixes: 186dfc85f9a8 ("ASoC: tas2764: expose die temp to hwmon")
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ALSA controls should return 1 from a put callback when the control
value changes. fsl_xcvr_capds_put() and fsl_xcvr_tx_cs_put() both
update cached control data but always return 0, so ALSA suppresses
change notifications for the Capabilities Data Structure and playback
IEC958 channel status controls.
Compare the old and new cached values before copying the new data,
and return whether the control value changed.
Fixes: 28564486866f ("ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260428-asoc-fsl-xcvr-event-generation-v1-1-f21cf0812c4f@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Treat the companion amp as generic AMP until full support for companion
amp is added.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20260430121043.552241-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a DMI quirk for the HP OMEN Gaming Laptop 16-ap0xxx line fixing the
issue where the internal microphone was not detected.
Cc: stable@vger.kernel.org
Signed-off-by: Tommaso Soncin <soncintommaso@gmail.com>
Link: https://patch.msgid.link/20260429160858.538986-1-soncintommaso@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove the incorrect use of onchip_spkid_gpios[i] in the dev_err() after
regmap_read() of CS35L56_GPIO_STATUS1 returns an error.
This dev_err() was incorrectly copy-pasted from one inside the for-loop,
where i was valid. The read of CS35L56_GPIO_STATUS1 isn't for a specific
GPIO register, so the use of onchip_spkid_gpios[i] in the error message is
both irrelevant and out-of-bounds here.
Fixes: 4d1e3e2c404d ("ASoC: cs35l56: Support for reading speaker ID from on-chip GPIOs")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260430101134.2655938-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The laptop requires a quirk ID to enable its internal microphone. Add
it to the DMI quirk table.
Reported-by: gannovera <gannovera@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218402
Signed-off-by: Bob Song <songxiebing@kylinos.cn>
Link: https://patch.msgid.link/20260430014920.141276-1-songxiebing@kylinos.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The error path of cs35l56_runtime_resume_common() should only write
the hibernation sequence if can_hibernate is true.
Something has already gone badly wrong if we ever reach the error
path. But triggering hibernate on hardware that does not support it
is likely to make the situation unrecoverable without a full reboot
because there might not be any hardware signal to exit hibernate.
Fixes: a47cf4dac7dc ("ASoC: cs35l56: Change hibernate sequence to use allow auto hibernate")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260429105315.2438298-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When TX is already running (SSCR_SSE is set), the hw_params callback
returns early before setting up DMA parameters for the RX stream. This
prevents the capture path from configuring its DMA data properly.
Move the SSCR_SSE check after DMA parameter setup and format
constraints, so both TX and RX streams get their DMA configuration
regardless of whether the hardware is already enabled. The early return
now only skips the register writes that would disrupt an active stream.
Fixes: fce217449075 ("ASoC: spacemit: add i2s support for K1 SoC")
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://patch.msgid.link/20260429-k1-i2s-fix-v2-1-8d67835aaddc@linux.spacemit.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
anc_configure() passed values from drvdata->anc_fir_values[],
drvdata->anc_iir_values[] and drvdata->sid_fir_values[] as register
offset to snd_soc_component_read(). The content of these arrays are user
controllable via the component controls "ANC FIR Coefficients", "ANC
IIR Coefficients" and "Sidetone FIR Coefficients" which I assume are
supposed to hold register values, not register offsets.
Without a datasheet for that component and given that before commit
a201aef1a88b ("ASoC: codecs: ab8500: Fix casting of private data") the
arrays overlapped with driver control structures and thus didn't work
properly since 2012, drop that functionality and let someone repair it
who has an actual need for it.
With the core functionally removed several code parts become essentially
unused and are removed, too.
Reported-by: Sashiko (gemini/gemini-3.1-pro-preview)
Link: https://sashiko.dev/#/patchset/20260428192255.2294705-2-u.kleine-koenig%40baylibre.com
Fixes: 679d7abdc754 ("ASoC: codecs: Add AB8500 codec-driver")
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260430154524.338912-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Set both TX and RX FIFO trigger thresholds (TFT/RFT) to 0xF (half of
the 32-entry FIFO) instead of 5. This provides better DMA efficiency
by allowing more data to accumulate before triggering a DMA request,
reducing the number of DMA transactions needed.
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://patch.msgid.link/20260429-k3-i2s-v1-3-2fe99db11ecb@linux.spacemit.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Hardware constraints should be applied in the startup callback rather
than hw_params, as hw_params may be called too late for the constraints
to take effect properly.
Move the channel count and format constraints for I2S and DSP_A/DSP_B
modes into a new startup callback. This also tightens the I2S mode
channel constraint from 1-2 to exactly 2, matching the actual hardware
behavior.
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://patch.msgid.link/20260429-k3-i2s-v1-2-2fe99db11ecb@linux.spacemit.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ab8500_filter_controls[i].private_value is initialized using
.private_value = (unsigned long)&(struct filter_control)
{.count = xcount, .min = xmin, .max = xmax}
thus it's a pointer to a struct filter_control casted to unsigned long.
So to get back that pointer .private_data must be cast back, not its
address.
Fixes: 679d7abdc754 ("ASoC: codecs: Add AB8500 codec-driver")
Signed-off-by: Christian A. Ehrhardt <christian.ehrhardt@codasip.com>
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260428192255.2294705-2-u.kleine-koenig@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Mark the OTP_MEM registers as volatile so that regcache_sync() will not
attempt to write to them.
These registers hold a constant, and originally they were marked as
readable non-volatile so that this value would be read into the regmap
cache. The problem with this is regcache_sync() issues a write for any
cached register that does not have a reg_default.
Though these registers are constants and writing them in normal use
cannot change OTP, it is illegal for the host to write to them.
Fixes: e1830f66f6c6 ("ASoC: cs35l56: Add helper functions for amp calibration")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260428115228.158252-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If byt_wm5102_prepare_and_enable_pll1() fails in the
SND_SOC_DAPM_EVENT_ON() path, platform_clock_control() returns after
clk_prepare_enable(priv->mclk) without disabling the clock again.
This leaks an MCLK enable reference on failed power-up attempts. Add the
missing clk_disable_unprepare() on the error path, matching the unwind
used by the other Intel platform_clock_control() implementations.
Fixes: 9a87fc1e0619 ("ASoC: Intel: bytcr_wm5102: Add machine driver for BYT/WM5102")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260427-bytcr-wm5102-mclk-leak-v1-1-02b96d08e99c@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In aw88395_i2c_probe(), if `devm_gpiod_get_optional()` fails, it returns
an ERR_PTR() error pointer. The current code only prints a message and
continues execution, leaving `aw88395->reset_gpio` as an invalid pointer.
Later, in `aw88395_hw_reset()`, this invalid pointer is passed to
`gpiod_set_value_cansleep()`, which dereferences it and causes a kernel
panic.
For optional GPIOs, `devm_gpiod_get_optional()` returns NULL if the GPIO
is not defined in the DT, which is safe. If it returns an ERR_PTR, it
means a real error occurred (e.g., -EPROBE_DEFER) and the probe must be
aborted.
Also, since the GPIO is optional, remove the dev_err() log in
aw88395_hw_reset() when the GPIO is missing to match the optional
semantics. This also fixes a potential NULL pointer dereference as
aw_pa is not initialized when aw88395_hw_reset() is called.
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Link: https://patch.msgid.link/20260428023408.46420-1-wangdich9700@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
