| Age | Commit message (Collapse) | Author |
|---|
|
As IPv6 is built-in only, it does not make sense to continue using
IS_BUILTIN(CONFIG_IPV6). Therefore, replace it with IS_ENABLED() when
necessary and drop it if it isn't valid anymore.
Notice that there is still one instance related to ICMPv6, as it
requires more changes it will be handle separately.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260325120928.15848-4-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As IPv6 is built-in only, the macro is always evaluating to an empty
one. Remove it completely from the code.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260325120928.15848-3-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Maintaining a modular IPv6 stack offers image size savings for specific
setups, this benefit is outweighed by the architectural burden it
imposes on the subsystems on implementation and maintenance. Therefore,
drop it.
Change CONFIG_IPV6 from tristate to bool. Remove all Kconfig
dependencies across the tree that explicitly checked for IPV6=m. In
addition, remove MODULE_DESCRIPTION(), MODULE_ALIAS(), MODULE_AUTHOR()
and MODULE_LICENSE().
This is also replacing module_init() by device_initcall(). It is not
possible to use fs_initcall() as IPv4 does because that creates a race
condition on IPv6 addrconf.
Finally, modify the default configs from CONFIG_IPV6=m to CONFIG_IPV6=y
except for m68k as according to the bloat-o-meter the image is
increasing by 330KB~ and that isn't acceptable. Instead, disable IPv6 on
this architecture by default. This is aligned with m68k RAM requirements
and recommendations [1].
[1] http://www.linux-m68k.org/faq/ram.html
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # arm64
Link: https://patch.msgid.link/20260325120928.15848-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
m2sm() converts a u32 slope to a u64 scaled value. For large inputs
(e.g. m1=4000000000), the result can reach 2^32. rtsc_min() stores
the difference of two such u64 values in a u32 variable `dsm` and
uses it as a divisor. When the difference is exactly 2^32 the
truncation yields zero, causing a divide-by-zero oops in the
concave-curve intersection path:
Oops: divide error: 0000
RIP: 0010:rtsc_min (net/sched/sch_hfsc.c:601)
Call Trace:
init_ed (net/sched/sch_hfsc.c:629)
hfsc_enqueue (net/sched/sch_hfsc.c:1569)
[...]
Widen `dsm` to u64 and replace do_div() with div64_u64() so the full
difference is preserved.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260326204310.1549327-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
br_nd_send() walks ND options according to option-provided lengths.
A malformed option can make the parser advance beyond the computed
option span or use a too-short source LLADDR option payload.
Validate option lengths against the remaining NS option area before
advancing, and only read source LLADDR when the option is large enough
for an Ethernet address.
Fixes: ed842faeb2bd ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports")
Cc: stable@vger.kernel.org
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Tested-by: Ao Zhou <n05ec@lzu.edu.cn>
Co-developed-by: Yuan Tan <tanyuan98@outlook.com>
Signed-off-by: Yuan Tan <tanyuan98@outlook.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yang Yang <n05ec@lzu.edu.cn>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260326034441.2037420-3-n05ec@lzu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
br_nd_send() parses neighbour discovery options from ns->opt[] and
assumes that these options are in the linear part of request.
Its callers only guarantee that the ICMPv6 header and target address
are available, so the option area can still be non-linear. Parsing
ns->opt[] in that case can access data past the linear buffer.
Linearize request before option parsing and derive ns from the linear
network header.
Fixes: ed842faeb2bd ("bridge: suppress nd pkts on BR_NEIGH_SUPPRESS ports")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Tested-by: Ao Zhou <n05ec@lzu.edu.cn>
Co-developed-by: Yuan Tan <tanyuan98@outlook.com>
Signed-off-by: Yuan Tan <tanyuan98@outlook.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yang Yang <n05ec@lzu.edu.cn>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260326034441.2037420-2-n05ec@lzu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Oskar Kjos reported the following problem.
ip4ip6_err() calls icmp_send() on a cloned skb whose cb[] was written
by the IPv6 receive path as struct inet6_skb_parm. icmp_send() passes
IPCB(skb2) to __ip_options_echo(), which interprets that cb[] region
as struct inet_skb_parm (IPv4). The layouts differ: inet6_skb_parm.nhoff
at offset 14 overlaps inet_skb_parm.opt.rr, producing a non-zero rr
value. __ip_options_echo() then reads optlen from attacker-controlled
packet data at sptr[rr+1] and copies that many bytes into dopt->__data,
a fixed 40-byte stack buffer (IP_OPTIONS_DATA_FIXED_SIZE).
To fix this we clear skb2->cb[], as suggested by Oskar Kjos.
Also add minimal IPv4 header validation (version == 4, ihl >= 5).
Fixes: c4d3efafcc93 ("[IPV6] IP6TUNNEL: Add support to IPv4 over IPv6 tunnel.")
Reported-by: Oskar Kjos <oskar.kjos@hotmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260326155138.2429480-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Sashiko AI-review observed:
In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet
where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2
and passed to icmp6_send(), it uses IP6CB(skb2).
IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso
offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm
at offset 18.
If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao
would be a non-zero offset. Inside icmp6_send(), mip6_addr_swap() is called
and uses ipv6_find_tlv(skb, opt->dsthao, IPV6_TLV_HAO).
This would scan the inner, attacker-controlled IPv6 packet starting at that
offset, potentially returning a fake TLV without checking if the remaining
packet length can hold the full 18-byte struct ipv6_destopt_hao.
Could mip6_addr_swap() then perform a 16-byte swap that extends past the end
of the packet data into skb_shared_info?
Should the cb array also be cleared in ip6_err_gen_icmpv6_unreach() and
ip6ip6_err() to prevent this?
This patch implements the first suggestion.
I am not sure if ip6ip6_err() needs to be changed.
A separate patch would be better anyway.
Fixes: ca15a078bd90 ("sit: generate icmpv6 error when receiving icmpv4 error")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Closes: https://sashiko.dev/#/patchset/20260326155138.2429480-1-edumazet%40google.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Oskar Kjos <oskar.kjos@hotmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260326202608.2976021-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert confirm_rx to little endian when enqueueing and convert it back on
receive. This fixes control flow on big endian hosts, little endian is
unaffected.
On transmit, store confirm_rx as __le32 using cpu_to_le32(). On receive,
apply le32_to_cpu() before using the value. !! ensures the value is 0 or 1
in native endianness, so the conversion isn’t strictly required here, but
it is kept for consistency and clarity.
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Alexander Wilhelm <alexander.wilhelm@westermo.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ioam6_fill_trace_data() stores the schema contribution to the trace
length in a u8. With bit 22 enabled and the largest schema payload,
sclen becomes 1 + 1020 / 4, wraps from 256 to 0, and bypasses the
remaining-space check. __ioam6_fill_trace_data() then positions the
write cursor without reserving the schema area but still copies the
4-byte schema header and the full schema payload, overrunning the trace
buffer.
Keep sclen in an unsigned int so the remaining-space check and the write
cursor calculation both see the full schema length.
Fixes: 8c6f6fa67726 ("ipv6: ioam: IOAM Generic Netlink API")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
to zero to prevent an info-leak
When processing Router Advertisements with user options the kernel
builds an RTM_NEWNDUSEROPT netlink message. The nduseroptmsg struct
has three padding fields that are never zeroed and can leak kernel data
The fix is simple, just zeroes the padding fields.
Fixes: 31910575a9de ("[IPv6]: Export userland ND options through netlink (RDNSS support)")
Signed-off-by: Yochai Eisenrich <echelonh@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260324224925.2437775-1-echelonh@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
__radix_tree_create() allocates and links intermediate nodes into the
tree one by one. If a subsequent allocation fails, the already-linked
nodes remain in the tree with no corresponding leaf entry. These orphaned
internal nodes are never reclaimed because radix_tree_for_each_slot()
only visits slots containing leaf values.
The radix_tree API is deprecated in favor of xarray. As suggested by
Matthew Wilcox, migrate qrtr_tx_flow from radix_tree to xarray instead
of fixing the radix_tree itself [1]. xarray properly handles cleanup of
internal nodes — xa_destroy() frees all internal xarray nodes when the
qrtr_node is released, preventing the leak.
[1] https://lore.kernel.org/all/20260225071623.41275-1-jiayuan.chen@linux.dev/T/
Reported-by: syzbot+006987d1be3586e13555@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000bfba3a060bf4ffcf@google.com/T/
Fixes: 5fdeb0d372ab ("net: qrtr: Implement outgoing flow control")
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260324080645.290197-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While net/ipv4/tcp_yeah.c is correctly setting .cwnd_event_tx_start
to tcp_vegas_cwnd_event_tx_start(), I forgot to do the same in tcp_vegas.c
Fixes: d1e59a469737 ("tcp: add cwnd_event_tx_start to tcp_congestion_ops")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260325212440.4146579-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently, we incorrectly send messages that are within 4 bytes (a
struct mctp_hdr) smaller than the MTU through mctp_do_fragment_route().
This has no effect on the actual fragmentation, as we will still send as
one packet, but unnecessarily copies the original skb into a new
single-fragment skb.
Instead of having the MTU comparisons in both mctp_local_output() and
mctp_do_fragment_route(), feed all local messages through the latter,
and add the single-packet optimisation there.
This means we can coalesce the routing path of mctp_local_output, so our
out_release path is now solely for errors, so rename the label
accordingly.
Include a check in the route tests for the single-packet case too.
Reported-by: yuanzhaoming <yuanzm2@lenovo.com>
Closes: https://github.com/openbmc/linux/commit/269936db5eb3962fe290b1dc4dbf1859cd5a04dd#r175836230
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260324-dev-mtu-copy-v1-1-7af6bd7027d3@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add SEG6_IPTUNNEL_SRC in the uapi for users to configure a specific
tunnel source address. Make seg6_iptunnel handle the new attribute
correctly. It has priority over the configured per-netns tunnel
source address, if any.
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: Justin Iurman <justin.iurman@6wind.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20260324091434.359341-2-justin.iurman@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RCU-protected codepaths (mpls_forward, mpls_dump_routes) can have
an inconsistent view of platform_labels vs platform_label in case of a
concurrent resize (resize_platform_label_table, under
platform_mutex). This can lead to OOB accesses.
This patch adds a seqcount, so that we get a consistent snapshot.
Note that mpls_label_ok is also susceptible to this, so the check
against RTA_DST in rtm_to_route_config, done outside platform_mutex,
is not sufficient. This value gets passed to mpls_label_ok once more
in both mpls_route_add and mpls_route_del, so there is no issue, but
that additional check must not be removed.
Reported-by: Yuan Tan <tanyuan98@outlook.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Fixes: 7720c01f3f590 ("mpls: Add a sysctl to control the size of the mpls label table")
Fixes: dde1b38e873c ("mpls: Convert mpls_dump_routes() to RCU.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/cd8fca15e3eb7e212b094064cd83652e20fd9d31.1774284088.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
A fairly big set of changes all over, notably with:
- cfg80211: new APIs for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
- mt76:
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- iwlwifi: UNII-9 and continuing UHR work
* tag 'wireless-next-2026-03-26' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (230 commits)
wifi: mac80211: ignore reserved bits in reconfiguration status
wifi: cfg80211: allow protected action frame TX for NAN
wifi: ieee80211: Add some missing NAN definitions
wifi: nl80211: Add a notification to notify NAN channel evacuation
wifi: nl80211: add NL80211_CMD_NAN_ULW_UPDATE notification
wifi: nl80211: allow reporting spurious NAN Data frames
wifi: cfg80211: allow ToDS=0/FromDS=0 data frames on NAN data interfaces
wifi: nl80211: define an API for configuring the NAN peer's schedule
wifi: nl80211: add support for NAN stations
wifi: cfg80211: separately store HT, VHT and HE capabilities for NAN
wifi: cfg80211: add support for NAN data interface
wifi: cfg80211: make sure NAN chandefs are valid
wifi: cfg80211: Add an API to configure local NAN schedule
wifi: mac80211: cleanup error path of ieee80211_do_open
wifi: mac80211: extract channel logic from link logic
wifi: iwlwifi: mld: set RX_FLAG_RADIOTAP_TLV_AT_END generically
wifi: iwlwifi: reduce the number of prints upon firmware crash
wifi: iwlwifi: fix the description of SESSION_PROTECTION_CMD
wifi: iwlwifi: mld: introduce iwl_mld_vif_fw_id_valid
wifi: iwlwifi: mld: block EMLSR during TDLS connections
...
====================
Link: https://patch.msgid.link/20260326152021.305959-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.0-rc6).
No conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter for net
This is v3, I kept back an ipset fix and another to tigthen the xtables
interface to reject invalid combinations with the NFPROTO_ARP family.
They need a bit more discussion. I fixed the issues reported by AI on
patch 9 (add #ifdef to access ct zone, update nf_conntrack_broadcast
and patch 10 (use better Fixes: tag). Thanks!
The following patchset contains Netfilter fixes for *net*.
Note that most bugs fixed here stem from 2.6 days, the large PR is not
due to an increase in regressions.
1) Fix incorrect reject of set updates with nf_tables pipapo set
avx2 backend. This comes with a regression test in patch 2.
From Florian Westphal.
2) nfnetlink_log needs to zero padding to prevent infoleak to userspace,
from Weiming Shi.
3) xtables ip6t_rt module never validated that addrnr length is within the
allowed array boundary. Reject bogus values. From Ren Wei.
4) Fix high memory usage in rbtree set backend that was unwanted side-effect
of the recently added binary search blob. From Pablo Neira Ayuso.
5) Patches 5 to 10, also from Pablo, address long-standing RCU safety bugs
in conntracks handling of expectations: We can never safely defer
a conntrack extension area without holding a reference. Yet expectation
handling does so in multiple places. Fix this by avoiding the need to
look into the master conntrack to begin with and by extending locked
sections in a few places.
11) Fix use of uninitialized rtp_addr in the sip conntrack helper,
also from Weiming Shi.
12) Add stricter netlink policy checks in ctnetlink, from David Carlier.
This avoids undefined behaviour when userspace provides huge wscale
value.
netfilter pull request 26-03-26
* tag 'nf-26-03-26' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: ctnetlink: use netlink policy range checks
netfilter: nf_conntrack_sip: fix use of uninitialized rtp_addr in process_sdp
netfilter: nf_conntrack_expect: skip expectations in other netns via proc
netfilter: nf_conntrack_expect: store netns and zone in expectation
netfilter: ctnetlink: ensure safe access to master conntrack
netfilter: nf_conntrack_expect: use expect->helper
netfilter: nf_conntrack_expect: honor expectation helper field
netfilter: nft_set_rbtree: revisit array resize logic
netfilter: ip6t_rt: reject oversized addrnr in rt_mt6_check()
netfilter: nfnetlink_log: fix uninitialized padding leak in NFULA_PAYLOAD
selftests: netfilter: nft_concat_range.sh: add check for flush+reload bug
netfilter: nft_set_pipapo_avx2: don't return non-matching entry on expiry
====================
Link: https://patch.msgid.link/20260326125153.685915-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- L2CAP: Fix deadlock in l2cap_conn_del()
- L2CAP: Fix ERTM re-init and zero pdu_len infinite loop
- L2CAP: Fix send LE flow credits in ACL link
- btintel: serialize btintel_hw_error() with hci_req_sync_lock
- btusb: clamp SCO altsetting table indices
* tag 'for-net-2026-03-25' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btusb: clamp SCO altsetting table indices
Bluetooth: L2CAP: Fix ERTM re-init and zero pdu_len infinite loop
Bluetooth: L2CAP: Fix deadlock in l2cap_conn_del()
Bluetooth: btintel: serialize btintel_hw_error() with hci_req_sync_lock
Bluetooth: L2CAP: Fix send LE flow credits in ACL link
====================
Link: https://patch.msgid.link/20260325194358.618892-1-luiz.dentz@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Replace manual range and mask validations with netlink policy
annotations in ctnetlink code paths, so that the netlink core rejects
invalid values early and can generate extack errors.
- CTA_PROTOINFO_TCP_STATE: reject values > TCP_CONNTRACK_SYN_SENT2 at
policy level, removing the manual >= TCP_CONNTRACK_MAX check.
- CTA_PROTOINFO_TCP_WSCALE_ORIGINAL/REPLY: reject values > TCP_MAX_WSCALE
(14). The normal TCP option parsing path already clamps to this value,
but the ctnetlink path accepted 0-255, causing undefined behavior when
used as a u32 shift count.
- CTA_FILTER_ORIG_FLAGS/REPLY_FLAGS: use NLA_POLICY_MASK with
CTA_FILTER_F_ALL, removing the manual mask checks.
- CTA_EXPECT_FLAGS: use NLA_POLICY_MASK with NF_CT_EXPECT_MASK, adding
a new mask define grouping all valid expect flags.
Extracted from a broader nf-next patch by Florian Westphal, scoped to
ctnetlink for the fixes tree.
Fixes: c8e2078cfe41 ("[NETFILTER]: ctnetlink: add support for internal tcp connection tracking flags handling")
Signed-off-by: David Carlier <devnexen@gmail.com>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
process_sdp() declares union nf_inet_addr rtp_addr on the stack and
passes it to the nf_nat_sip sdp_session hook after walking the SDP
media descriptions. However rtp_addr is only initialized inside the
media loop when a recognized media type with a non-zero port is found.
If the SDP body contains no m= lines, only inactive media sections
(m=audio 0 ...) or only unrecognized media types, rtp_addr is never
assigned. Despite that, the function still calls hooks->sdp_session()
with &rtp_addr, causing nf_nat_sdp_session() to format the stale stack
value as an IP address and rewrite the SDP session owner and connection
lines with it.
With CONFIG_INIT_STACK_ALL_ZERO (default on most distributions) this
results in the session-level o= and c= addresses being rewritten to
0.0.0.0 for inactive SDP sessions. Without stack auto-init the
rewritten address is whatever happened to be on the stack.
Fix this by pre-initializing rtp_addr from the session-level connection
address (caddr) when available, and tracking via a have_rtp_addr flag
whether any valid address was established. Skip the sdp_session hook
entirely when no valid address exists.
Fixes: 4ab9e64e5e3c ("[NETFILTER]: nf_nat_sip: split up SDP mangling")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Skip expectations that do not reside in this netns.
Similar to e77e6ff502ea ("netfilter: conntrack: do not dump other netns's
conntrack entries via proc").
Fixes: 9b03f38d0487 ("netfilter: netns nf_conntrack: per-netns expectations")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
__nf_ct_expect_find() and nf_ct_expect_find_get() are called under
rcu_read_lock() but they dereference the master conntrack via
exp->master.
Since the expectation does not hold a reference on the master conntrack,
this could be dying conntrack or different recycled conntrack than the
real master due to SLAB_TYPESAFE_RCU.
Store the netns, the master_tuple and the zone in struct
nf_conntrack_expect as a safety measure.
This patch is required by the follow up fix not to dump expectations
that do not belong to this netns.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Holding reference on the expectation is not sufficient, the master
conntrack object can just go away, making exp->master invalid.
To access exp->master safely:
- Grab the nf_conntrack_expect_lock, this gets serialized with
clean_from_lists() which also holds this lock when the master
conntrack goes away.
- Hold reference on master conntrack via nf_conntrack_find_get().
Not so easy since the master tuple to look up for the master conntrack
is not available in the existing problematic paths.
This patch goes for extending the nf_conntrack_expect_lock section
to address this issue for simplicity, in the cases that are described
below this is just slightly extending the lock section.
The add expectation command already holds a reference to the master
conntrack from ctnetlink_create_expect().
However, the delete expectation command needs to grab the spinlock
before looking up for the expectation. Expand the existing spinlock
section to address this to cover the expectation lookup. Note that,
the nf_ct_expect_iterate_net() calls already grabs the spinlock while
iterating over the expectation table, which is correct.
The get expectation command needs to grab the spinlock to ensure master
conntrack does not go away. This also expands the existing spinlock
section to cover the expectation lookup too. I needed to move the
netlink skb allocation out of the spinlock to keep it GFP_KERNEL.
For the expectation events, the IPEXP_DESTROY event is already delivered
under the spinlock, just move the delivery of IPEXP_NEW under the
spinlock too because the master conntrack event cache is reached through
exp->master.
While at it, add lockdep notations to help identify what codepaths need
to grab the spinlock.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use expect->helper in ctnetlink and /proc to dump the helper name.
Using nfct_help() without holding a reference to the master conntrack
is unsafe.
Use exp->master->helper in ctnetlink path if userspace does not provide
an explicit helper when creating an expectation to retain the existing
behaviour. The ctnetlink expectation path holds the reference on the
master conntrack and nf_conntrack_expect lock and the nfnetlink glue
path refers to the master ct that is attached to the skb.
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The expectation helper field is mostly unused. As a result, the
netfilter codebase relies on accessing the helper through exp->master.
Always set on the expectation helper field so it can be used to reach
the helper.
nf_ct_expect_init() is called from packet path where the skb owns
the ct object, therefore accessing exp->master for the newly created
expectation is safe. This saves a lot of updates in all callsites
to pass the ct object as parameter to nf_ct_expect_init().
This is a preparation patches for follow up fixes.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Chris Arges reports high memory consumption with thousands of
containers, this patch revisits the array allocation logic.
For anonymous sets, start by 16 slots (which takes 256 bytes on x86_64).
Expand it by x2 until threshold of 512 slots is reached, over that
threshold, expand it by x1.5.
For non-anonymous set, start by 1024 slots in the array (which takes 16
Kbytes initially on x86_64). Expand it by x1.5.
Use set->ndeact to subtract deactivated elements when calculating the
number of the slots in the array, otherwise the array size array gets
increased artifically. Add special case shrink logic to deal with flush
set too.
The shrink logic is skipped by anonymous sets.
Use check_add_overflow() to calculate the new array size.
Add a WARN_ON_ONCE check to make sure elements fit into the new array
size.
Reported-by: Chris Arges <carges@cloudflare.com>
Fixes: 7e43e0a1141d ("netfilter: nft_set_rbtree: translate rbtree to array for binary search")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Reject rt match rules whose addrnr exceeds IP6T_RT_HOPS.
rt_mt6() expects addrnr to stay within the bounds of rtinfo->addrs[].
Validate addrnr during rule installation so malformed rules are rejected
before the match logic can use an out-of-range value.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Yuhang Zheng <z1652074432@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
__build_packet_message() manually constructs the NFULA_PAYLOAD netlink
attribute using skb_put() and skb_copy_bits(), bypassing the standard
nla_reserve()/nla_put() helpers. While nla_total_size(data_len) bytes
are allocated (including NLA alignment padding), only data_len bytes
of actual packet data are copied. The trailing nla_padlen(data_len)
bytes (1-3 when data_len is not 4-byte aligned) are never initialized,
leaking stale heap contents to userspace via the NFLOG netlink socket.
Replace the manual attribute construction with nla_reserve(), which
handles the tailroom check, header setup, and padding zeroing via
__nla_reserve(). The subsequent skb_copy_bits() fills in the payload
data on top of the properly initialized attribute.
Fixes: df6fb868d611 ("[NETFILTER]: nfnetlink: convert to generic netlink attribute functions")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The async_hold queue pins encrypted input skbs while
the AEAD engine references their scatterlist data. Once
tls_decrypt_async_wait() returns, every AEAD operation
has completed and the engine no longer references those
skbs, so they can be freed unconditionally.
A subsequent patch adds batch async decryption to
tls_sw_read_sock(), introducing a new call site that
must drain pending AEAD operations and release held
skbs. Move __skb_queue_purge(&ctx->async_hold) into
tls_decrypt_async_wait() so the purge is centralized
and every caller -- recvmsg's drain path, the -EBUSY
fallback in tls_do_decryption(), and the new read_sock
batch path -- releases held skbs on synchronization
without each site managing the purge independently.
This fixes a leak when tls_strp_msg_hold() fails part-way through,
after having added some cloned skbs to the async_hold
queue. tls_decrypt_sg() will then call tls_decrypt_async_wait() to
process all pending decrypts, and drop back to synchronous mode, but
tls_sw_recvmsg() only flushes the async_hold queue when one record has
been processed in "fully-async" mode, which may not be the case here.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Fixes: b8a6ff84abbc ("tls: wait for pending async decryptions if tls_strp_msg_hold fails")
Link: https://patch.msgid.link/20260324-tls-read-sock-v5-1-5408befe5774@oracle.com
[pabeni@redhat.com: added leak comment]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
New test case fails unexpectedly when avx2 matching functions are used.
The test first loads a ranomly generated pipapo set
with 'ipv4 . port' key, i.e. nft -f foo.
This works. Then, it reloads the set after a flush:
(echo flush set t s; cat foo) | nft -f -
This is expected to work, because its the same set after all and it was
already loaded once.
But with avx2, this fails: nft reports a clashing element.
The reported clash is of following form:
We successfully re-inserted
a . b
c . d
Then we try to insert a . d
avx2 finds the already existing a . d, which (due to 'flush set') is marked
as invalid in the new generation. It skips the element and moves to next.
Due to incorrect masking, the skip-step finds the next matching
element *only considering the first field*,
i.e. we return the already reinserted "a . b", even though the
last field is different and the entry should not have been matched.
No such error is reported for the generic c implementation (no avx2) or when
the last field has to use the 'nft_pipapo_avx2_lookup_slow' fallback.
Bisection points to
7711f4bb4b36 ("netfilter: nft_set_pipapo: fix range overlap detection")
but that fix merely uncovers this bug.
Before this commit, the wrong element is returned, but erronously
reported as a full, identical duplicate.
The root-cause is too early return in the avx2 match functions.
When we process the last field, we should continue to process data
until the entire input size has been consumed to make sure no stale
bits remain in the map.
Link: https://lore.kernel.org/netfilter-devel/20260321152506.037f68c0@elisabeth/
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The Link ID Info field in the Reconfiguration Status Duple subfield of
the Reconfiguration Response frame only uses the lower four bits for the
link ID. The upper bits are reserved and should therefore be ignored.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260325215404.ab5ccf4bc62e.I9aef8f4fb6f1b06671bb6cf0e2bd4ec6e4c8bda4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Allow transmitting protected dual of public action frames on
NAN device and NAN data interfaces, since NAN action frames
may be protected and can be sent on both.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260318143604.73801a92180c.I16000c3e1e2bbc320457db1ac728d789bb2f36c6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If all available channel resources are used for NAN channels, and one of
them is shared with another interface, and that interface needs to move
to a different channel (for example STA interface that needs to do a
channel or a link switch), then the driver can evacuate one of the NAN
channels (i.e. detach it from its channel resource and announce to the
peers that this channel is ULWed). In that case, the driver needs to
notify user space about the channel evacuation, so the user space can
adjust the local schedule accordingly.
Add a notification to let userspace know about it.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.d5bebfd5ff73.Iaaf5ef17e1ab7a38c19d60558e68fcf517e2b400@changeid
Link: https://patch.msgid.link/20260318123926.206536-11-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a new notification command that allows drivers to notify user space
when the device's ULW (Unaligned Schedule) blob has been updated. This
enables user space to attach the updated ULW blob to frames sent to NAN
peers.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.32b715af4ebb.Ibdb6e33941afd94abf77245245f87e4338d729d3@changeid
Link: https://patch.msgid.link/20260318123926.206536-10-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently we have this ability for AP and GO. But it is now needed also for
NAN_DATA mode - as per Wi-Fi Aware (TM) 4.0 specification 6.2.5:
"If a NAN Device receives a unicast NAN Data frame destined for it, but
with A1 address and A2 address that are not assigned to the NDP, it shall
discard the frame, and should send a Data Path Termination NAF to the
frame transmitter"
To allow this, change NL80211_CMD_UNEXPECTED_FRAME to support also
NAN_DATA, so drivers can report such cases and the user space can act
accordingly.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260108102921.5cf9f1351655.I47c98ce37843730b8b9eb8bd8e9ef62ed6c17613@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219094725.3846371-6-miriam.rachel.korenblit@intel.com
Link: https://patch.msgid.link/20260318123926.206536-9-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
According to Wi-Fi Aware (TM) specification Table 3, data frame should
have 0 in the FromDS/ToDS fields. Don't drop received frames with 0
FromDS/ToDS if they are received on NAN_DATA interface.
While at it, fix a double indent.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260108102921.de5f318a790a.Id34dd69552920b579e6881ffd38fa692a491b601@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219094725.3846371-5-miriam.rachel.korenblit@intel.com
Link: https://patch.msgid.link/20260318123926.206536-8-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add an NL80211 command to configure the NAN schedule of a NAN peer.
Such a schedule contains a list of NAN channels, and a mapping from each
time slots to the corresponding channel (or unscheduled).
Also contains more information about the schedule, such as sequence ID
and map ID.
Not all of the restrictions are validated in this patch. In particular,
comparison of two maps of the same peer requires storing/retrieving each
map of each peer, only for validation.
Therefore, it is the responsibilty of the driver to check that.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.5b13fa5af4f6.If0e214ff5b52c9666e985fefa3f7be0ad14d93fb@changeid
Link: https://patch.msgid.link/20260318123926.206536-7-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There are 2 types of logical links with a NAN peer:
- management (NMI), which is used for Tx/Rx of NAN management frames.
- data (NDI), which is used for Tx/Rx of data frames, or non-NAN
management frames.
The NMI station has two roles:
- representation of the NAN peer - for example, the peer's schedule
and the HT, VHT, HE capabilities - belong to the NMI station, and not to
the NDI ones.
- Tx/Rx of NAN management frames to/from the peer.
The NDI station is used for Tx/Rx data frames of a specific NDP that was
established with the NAN peer.
Note that a peer can choose to reuse its NMI address as the NDI address.
In that case, it is expected that two stations will be added even though
they will have the same address.
- An NDI station can only be added after the corresponding NMI station
was configured with capabilities.
- All the NDI stations will be removed before the NDI interface is brought
down.
- All NMI stations will be removed before NAN is stopped.
- Before NMI sta removal, all corresponding NDI stations will be removed
Add support for adding, removing, and changing NMI and NDI stations.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.d280936ee832.I6d859eee759bb5824a9ffd2984410faf879ba00e@changeid
Link: https://patch.msgid.link/20260318123926.206536-6-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In NAN, unlike in other modes, there is only one set of (HT, VHT, HE)
capabilities that is used for all channels (and bands) used in the NAN
data path.
This set of capabilities will have to be a special one, for example - have
the minimum of (HT-for-5 GHz, HT-for-2.4 GHz), careful handling of the
bits that have a different meaning for each band, etc.
While we could use the exiting sband/iftype capabilities, and require
identical capabilities for all bands (makes no sense since this means
that we will have VHT capabilities in the 2.4 GHz slot),
or require that only one of the sbands will be set,
or have logic to extract the minimum and handle the conflicting bits -
it seems simpler to add a dedicated set of capabilities which is special
for NAN, and is band agnostic, to be populated by the driver.
That way we also let the driver decide how it wants to handle the
conflicting bits.
Add this special set of these capabilities to wiphy:nan_capabilities, to be
populated by the driver.
Send it to user space.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.4b6f3e4a81b4.I45422adc0df3ad4101d857a92e83f0de5cf241e1@changeid
Link: https://patch.msgid.link/20260318123926.206536-5-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This new interface type represents a NAN data interface (NDI).
It is used for data communication with NAN peers.
Note that the existing NL80211_IFTYPE_NAN interface, which is the NAN
Management Interface (NMI), is used for management communication.
An NDI interface is started when a new NAN data path is about to
be established, and is stopped after the NAN data path is terminated.
- An NDI interface can only be started if the NMI is running, and NAN is
started.
- Before the NMI is stopped, the NDI interfaces will be stopped.
Add the new interface type, handle add/remove operations for it,
and makes sure of the conditions above.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.0d681335c2e2.I92973483e927820ae2297853c141842fdb262747@changeid
Link: https://patch.msgid.link/20260318123926.206536-4-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Until now there was not handling for NAN in reg_wdev_chan_valid.
Now as this wdev might use chandefs, check the validity of those.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260108102921.51b42ffc9a42.Iacb030fc17027afb55707ca1d6dc146631d55767@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219094725.3846371-4-miriam.rachel.korenblit@intel.com
Link: https://patch.msgid.link/20260318123926.206536-3-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add an nl80211 API to allow user space to configure the local NAN
schedule.
The local schedule consists of a list of channel definitions and a schedule
map, in which each element covers a time slot and indicates on what
channel the device should be in that time slot.
Channels can be added to schedule even without being scheduled, for
reservation purposes.
A schedule can be configured either immedietally or be deferred, in case
there are already connected peers.
When the deferred flag is set, the command is a request from the device
to perform an announced schedule update: send the updated NAN
Availability - as set in this command - to the peers, and do the
actual switch to the new schedule on the right time (i.e. at the end of
the slot after the slot in which the update was sent to the peers).
In addition, a notification will be sent to indicate a deferred update
completion.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.ecca178a2de0.Ic977ab08b4ed5cf9b849e55d3a59b01ad3fbd08e@changeid
Link: https://patch.msgid.link/20260318123926.206536-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If we failed on drv_start, we currently cleanup AP_VLAN reference to
bss.
But this is not needed, since AP_VLAN must be tied to a pre-existing AP
interface, so open_count cannot be 0, so we will never call drv_start
for AP_VLAN interfaces.
Remove these cleanup and return immediately instead.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260325154742.3c532a9132c3.Idac5c38d5ad7ce97782a8c05ae72bb0c689c4fa9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The logic that tries to reuse an existing chanctx or create a new one if
such doesn't exist will be used for other types of chanctx users.
Extract this logic from _ieee80211_link_use_channel.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260325154550.9a08397a7590.Id24934d14f240f8d38a23f3b1786235bac0b3e60@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
l2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTED
state to support L2CAP reconfiguration (e.g. MTU changes). However,
since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set from
the initial configuration, the reconfiguration path falls through to
l2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, and
retrans_list without freeing the previous allocations and sets
chan->sdu to NULL without freeing the existing skb. This leaks all
previously allocated ERTM resources.
Additionally, l2cap_parse_conf_req() does not validate the minimum
value of remote_mps derived from the RFC max_pdu_size option. A zero
value propagates to l2cap_segment_sdu() where pdu_len becomes zero,
causing the while loop to never terminate since len is never
decremented, exhausting all available memory.
Fix the double-init by skipping l2cap_ertm_init() and
l2cap_chan_ready() when the channel is already in BT_CONNECTED state,
while still allowing the reconfiguration parameters to be updated
through l2cap_parse_conf_req(). Also add a pdu_len zero check in
l2cap_segment_sdu() as a safeguard.
Fixes: 96298f640104 ("Bluetooth: L2CAP: handle l2cap config request during open state")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
l2cap_conn_del() calls cancel_delayed_work_sync() for both info_timer
and id_addr_timer while holding conn->lock. However, the work functions
l2cap_info_timeout() and l2cap_conn_update_id_addr() both acquire
conn->lock, creating a potential AB-BA deadlock if the work is already
executing when l2cap_conn_del() takes the lock.
Move the work cancellations before acquiring conn->lock and use
disable_delayed_work_sync() to additionally prevent the works from
being rearmed after cancellation, consistent with the pattern used in
hci_conn_del().
Fixes: ab4eedb790ca ("Bluetooth: L2CAP: Fix corrupted list in hci_chan_del")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
When the L2CAP channel mode is L2CAP_MODE_ERTM/L2CAP_MODE_STREAMING,
l2cap_publish_rx_avail will be called and le flow credits will be sent in
l2cap_chan_rx_avail, even though the link type is ACL.
The logs in question as follows:
> ACL Data RX: Handle 129 flags 0x02 dlen 12
L2CAP: Unknown (0x16) ident 4 len 4
40 00 ed 05
< ACL Data TX: Handle 129 flags 0x00 dlen 10
L2CAP: Command Reject (0x01) ident 4 len 2
Reason: Command not understood (0x0000)
Bluetooth: Unknown BR/EDR signaling command 0x16
Bluetooth: Wrong link type (-22)
Fixes: ce60b9231b66 ("Bluetooth: compute LE flow credits based on recvbuf space")
Signed-off-by: Zhang Chen <zhangchen01@kylinos.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
(tcp_congestion_ops)->cwnd_event() is called very often, with
@event oscillating between CA_EVENT_TX_START and other values.
This is not branch prediction friendly.
Provide a new cwnd_event_tx_start pointer dedicated for CA_EVENT_TX_START.
Both BBR and CUBIC benefit from this change, since they only care
about CA_EVENT_TX_START.
No change in kernel size:
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux
add/remove: 4/4 grow/shrink: 3/1 up/down: 564/-568 (-4)
Function old new delta
bbr_cwnd_event_tx_start - 450 +450
cubictcp_cwnd_event_tx_start - 70 +70
__pfx_cubictcp_cwnd_event_tx_start - 16 +16
__pfx_bbr_cwnd_event_tx_start - 16 +16
tcp_unregister_congestion_control 93 99 +6
tcp_update_congestion_control 518 521 +3
tcp_register_congestion_control 422 425 +3
__tcp_transmit_skb 3308 3306 -2
__pfx_cubictcp_cwnd_event 16 - -16
__pfx_bbr_cwnd_event 16 - -16
cubictcp_cwnd_event 80 - -80
bbr_cwnd_event 454 - -454
Total: Before=25240512, After=25240508, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260323234920.1097858-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
