| Age | Commit message (Collapse) | Author |
|---|
|
In preparation of multiple scheduler support, add p->scx.sched which points
to the scx_sched instance that the task is scheduled by, which is currently
always scx_root. Add scx_task_sched[_rcu]() accessors which return the
associated scx_sched of the specified task and replace the raw scx_root
dereferences with it where applicable. scx_task_on_sched() is also added to
test whether a given task is on the specified sched.
As scx_root is still the only scheduler, this shouldn't introduce
user-visible behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
A system often runs multiple workloads especially in multi-tenant server
environments where a system is split into partitions servicing separate
more-or-less independent workloads each requiring an application-specific
scheduler. To support such and other use cases, sched_ext is in the process
of growing multiple scheduler support.
When partitioning a system in terms of CPUs for such use cases, an
oft-taken approach is hard partitioning the system using cpuset. While it
would be possible to tie sched_ext multiple scheduler support to cpuset
partitions, such an approach would have fundamental limitations stemming
from the lack of dynamism and flexibility.
Users often don't care which specific CPUs are assigned to which workload
and want to take advantage of optimizations which are enabled by running
workloads on a larger machine - e.g. opportunistic over-commit, improving
latency critical workload characteristics while maintaining bandwidth
fairness, employing control mechanisms based on different criteria than
on-CPU time for e.g. flexible memory bandwidth isolation, packing similar
parts from different workloads on same L3s to improve cache efficiency,
and so on.
As this sort of dynamic behaviors are impossible or difficult to implement
with hard partitioning, sched_ext is implementing cgroup sub-sched support
where schedulers can be attached to the cgroup hierarchy and a parent
scheduler is responsible for controlling the CPUs that each child can use
at any given moment. This makes CPU distribution dynamically controlled by
BPF allowing high flexibility.
This patch adds the skeletal sched_ext cgroup sub-sched support:
- sched_ext_ops.sub_cgroup_id and .sub_attach/detach() are added. Non-zero
sub_cgroup_id indicates that the scheduler is to be attached to the
identified cgroup. A sub-sched is attached to the cgroup iff the nearest
ancestor scheduler implements .sub_attach() and grants the attachment. Max
nesting depth is limited by SCX_SUB_MAX_DEPTH.
- When a scheduler exits, all its descendant schedulers are exited
together. Also, cgroup.scx_sched added which points to the effective
scheduler instance for the cgroup. This is updated on scheduler
init/exit and inherited on cgroup online. When a cgroup is offlined, the
attached scheduler is automatically exited.
- Sub-sched support is gated on CONFIG_EXT_SUB_SCHED which is
automatically enabled if both SCX and cgroups are enabled. Sub-sched
support is not tied to the CPU controller but rather the cgroup
hierarchy itself. This is intentional as the support for cpu.weight and
cpu.max based resource control is orthogonal to sub-sched support. Note
that CONFIG_CGROUPS around cgroup subtree iteration support for
scx_task_iter is replaced with CONFIG_EXT_SUB_SCHED for consistency.
- This allows loading sub-scheds and most framework operations such as
propagating disable down the hierarchy work. However, sub-scheds are not
operational yet and all tasks stay with the root sched. This will serve
as the basis for building up full sub-sched support.
- DSQs point to the scx_sched they belong to.
- scx_qmap is updated to allow attachment of sub-scheds and also serving
as sub-scheds.
- scx_is_descendant() is added but not yet used in this patch. It is used by
later changes in the series and placed here as this is where the function
belongs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
In preparation for multiple scheduler support, reorganize the enable and
disable paths to make scheduler instances explicit. Extract
scx_root_disable() from scx_disable_workfn(). Rename scx_enable_workfn()
to scx_root_enable_workfn(). Change scx_disable() to take @sch parameter
and only queue disable_work if scx_claim_exit() succeeds for consistency.
Move exit_kind validation into scx_claim_exit(). The sysrq handler now
prints a message when no scheduler is loaded.
These changes don't materially affect user-visible behavior.
v2: Keep scx_enable() name as-is and only rename the workfn to
scx_root_enable_workfn(). Change scx_enable() return type to s32.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
- Always trigger the warning if p->scx.disallow is set for fork inits. There
is no reason to set it during forks.
- Flip the positions of if/else arms to ease adding error conditions.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
The planned sched_ext cgroup sub-scheduler support needs the newly forked
task to be associated with its cgroup in its post_fork() hook. There is no
existing ordering requirement between the two now. Swap them and note the
new ordering requirement.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Cc: Ingo Molnar <mingo@redhat.com>
|
|
Make sched_cgroup_fork() pass @kargs to scx_fork(). This will be used to
determine @p's cgroup for cgroup sub-sched support.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Cc: Peter Zijlstra <peterz@infradead.org>
|
|
For the planned cgroup sub-scheduler support, enable/disable operations are
going to be subtree specific and iterating all tasks in the system for those
operations can be unnecessarily expensive and disruptive.
cgroup already has mechanisms to perform subtree task iterations. Implement
cgroup subtree iteration for scx_task_iter:
- Add optional @cgrp to scx_task_iter_start() which enables cgroup subtree
iteration.
- Make scx_task_iter use css_next_descendant_pre() and css_task_iter to
iterate all tasks in the cgroup subtree.
- Update all existing callers to pass NULL to maintain current behavior.
The two iteration mechanisms are independent and duplicate. It's likely that
scx_tasks can be removed in favor of always using cgroup iteration if
CONFIG_SCHED_CLASS_EXT depends on CONFIG_CGROUPS.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup into for-7.1
To receive 5b30afc20b3f ("cgroup: Expose some cgroup helpers") which will be
used by sub-sched support.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
To prepare for hierarchical scheduling patchset which will cause multiple
conflicts otherwise.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Besides deferring the call to housekeeping_update(), commit 6df415aa46ec
("cgroup/cpuset: Defer housekeeping_update() calls from CPU hotplug
to workqueue") also defers the rebuild_sched_domains() call to
the workqueue. So a new offline CPU may still be in a sched domain
or new online CPU not showing up in the sched domains for a short
transition period. That could be a problem in some corner cases and
can be the cause of a reported test failure[1]. Fix it by calling
rebuild_sched_domains_cpuslocked() directly in hotplug as before. If
isolated partition invalidation or recreation is being done, the
housekeeping_update() call to update the housekeeping cpumasks will
still be deferred to a workqueue.
In commit 3bfe47967191 ("cgroup/cpuset: Move
housekeeping_update()/rebuild_sched_domains() together"),
housekeeping_update() is called before rebuild_sched_domains() because
it needs to access the HK_TYPE_DOMAIN housekeeping cpumask. That is now
changed to use the static HK_TYPE_DOMAIN_BOOT cpumask as HK_TYPE_DOMAIN
cpumask is now changeable at run time. As a result, we can move the
rebuild_sched_domains() call before housekeeping_update() with
the slight advantage that it will be done in the same cpus_read_lock
critical section without the possibility of interference by a concurrent
cpu hot add/remove operation.
As it doesn't make sense to acquire cpuset_mutex/cpuset_top_mutex after
calling housekeeping_update() and immediately release them again, move
the cpuset_full_unlock() operation inside update_hk_sched_domains()
and rename it to cpuset_update_sd_hk_unlock() to signify that it will
release the full set of locks.
[1] https://lore.kernel.org/lkml/1a89aceb-48db-4edd-a730-b445e41221fe@nvidia.com
Fixes: 6df415aa46ec ("cgroup/cpuset: Defer housekeeping_update() calls from CPU hotplug to workqueue")
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Chen Ridong <chenridong@huaweicloud.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Commit 0927780c90ce ("sched_ext: Use READ_ONCE() for lock-free reads
of module param variables") annotated the plain reads of
scx_slice_bypass_us and scx_bypass_lb_intv_us in bypass_lb_cpu(), but
missed a third site in scx_bypass():
WRITE_ONCE(scx_slice_dfl, scx_slice_bypass_us * NSEC_PER_USEC);
scx_slice_bypass_us is a module parameter writable via sysfs in
process context through set_slice_us() -> param_set_uint_minmax(),
which performs a plain store without holding bypass_lock. scx_bypass()
reads the variable under bypass_lock, but since the writer does not
take that lock, the two accesses are concurrent.
WRITE_ONCE() only applies volatile semantics to the store of
scx_slice_dfl -- the val expression containing scx_slice_bypass_us is
evaluated as a plain read, providing no protection against concurrent
writes.
Wrap the read with READ_ONCE() to complete the annotation started by
commit 0927780c90ce and make the access KCSAN-clean, consistent with
the existing READ_ONCE(scx_slice_bypass_us) in bypass_lb_cpu().
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
show_cpu_pool_hog() and show_cpu_pools_hogs() no longer only dump CPU
hogs — since commit 8823eaef45da ("workqueue: Show all busy workers in
stall diagnostics"), they dump every in-flight worker in the pool's
busy_hash.
Rename them to show_cpu_pool_busy_workers() and
show_cpu_pools_busy_workers() to accurately describe what they do.
Also fix the pr_info() message to say "stalled worker pools" instead of
"stalled CPU-bound worker pools", since sleeping/blocked workers are now
included.
No functional change.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Improve quirk visibility and configurability (Maurizio)
- Fix runtime user modification to queue setup (Keith)
- Fix multipath leak on try_module_get failure (Keith)
- Ignore ambiguous spec definitions for better atomics support
(John)
- Fix admin queue leak on controller reset (Ming)
- Fix large allocation in persistent reservation read keys
(Sungwoo Kim)
- Fix fcloop callback handling (Justin)
- Securely free DHCHAP secrets (Daniel)
- Various cleanups and typo fixes (John, Wilfred)
- Avoid a circular lock dependency issue in the sysfs nr_requests or
scheduler store handling
- Fix a circular lock dependency with the pcpu mutex and the queue
freeze lock
- Cleanup for bio_copy_kern(), using __bio_add_page() rather than the
bio_add_page(), as adding a page here cannot fail. The exiting code
had broken cleanup for the error condition, so make it clear that the
error condition cannot happen
- Fix for a __this_cpu_read() in preemptible context splat
* tag 'block-7.0-20260305' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: use trylock to avoid lockdep circular dependency in sysfs
nvme: fix memory allocation in nvme_pr_read_keys()
block: use __bio_add_page in bio_copy_kern
block: break pcpu_alloc_mutex dependency on freeze_lock
blktrace: fix __this_cpu_read/write in preemptible context
nvme-multipath: fix leak on try_module_get failure
nvmet-fcloop: Check remoteport port_state before calling done callback
nvme-pci: do not try to add queue maps at runtime
nvme-pci: cap queue creation to used queues
nvme-pci: ensure we're polling a polled queue
nvme: fix memory leak in quirks_param_set()
nvme: correct comment about nvme_ns_remove()
nvme: stop setting namespace gendisk device driver data
nvme: add support for dynamic quirk configuration via module parameter
nvme: fix admin queue leak on controller reset
nvme-fabrics: use kfree_sensitive() for DHCHAP secrets
nvme: stop using AWUPF
nvme: expose active quirks in sysfs
nvme/host: fixup some typos
|
|
kthread_exit became a macro to do_exit in commit 28aaa9c39945
("kthread: consolidate kthread exit paths to prevent use-after-free"),
so there is no kthread_exit function BTF ID to resolve. Remove it from
noreturn_deny to avoid resolve_btfids unresolved symbol warnings.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
On 32-bit architectures, unsigned long is only 32 bits wide, which
causes 64-bit inode numbers to be silently truncated. Several
filesystems (NFS, XFS, BTRFS, etc.) can generate inode numbers that
exceed 32 bits, and this truncation can lead to inode number collisions
and other subtle bugs on 32-bit systems.
Change the type of inode->i_ino from unsigned long to u64 to ensure that
inode numbers are always represented as 64-bit values regardless of
architecture. Update all format specifiers treewide from %lu/%lx to
%llu/%llx to match the new type, along with corresponding local variable
types.
This is the bulk treewide conversion. Earlier patches in this series
handled trace events separately to allow trace field reordering for
better struct packing on 32-bit.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260304-iino-u64-v3-12-2257ad83d372@kernel.org
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
inode->i_ino is being widened from unsigned long to u64. The audit
subsystem uses unsigned long ino in struct fields, function parameters,
and local variables that store inode numbers from arbitrary filesystems.
On 32-bit platforms this truncates inode numbers that exceed 32 bits,
which will cause incorrect audit log entries and broken watch/mark
comparisons.
Widen all audit ino fields, parameters, and locals to u64, and update
the inode format string from %lu to %llu to match.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260304-iino-u64-v3-2-2257ad83d372@kernel.org
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
raw_spin_rq_unlock() is short, and is called in some hot code paths
such as finish_lock_switch().
Inline raw_spin_rq_unlock() to micro-optimize performance a bit.
Signed-off-by: Xie Yuanbin <qq570070308@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20260216164950.147617-3-qq570070308@gmail.com
|
|
Conflicts:
kernel/sched/ext.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This recent commit:
96d1610e0b20b ("sched: Optimize hrtimer handling")
introduced a new build warning when !CONFIG_HOTPLUG_CPU
while SCHED_HRTIMERS=y [ == HIGH_RES_TIMERS=y ]:
/tip.testing/kernel/sched/core.c:882:13: warning: ‘hrtick_clear’ defined but not used [-Wunused-function]
Mark this helper function as always-used, instead of complicating
the code with another obscure #ifdef.
Fixes: 96d1610e0b20b ("sched: Optimize hrtimer handling")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/177245077226.1647592.1821545206171336606.tip-bot2@tip-bot2
|
|
Expose the following through cgroup.h:
- cgroup_on_dfl()
- cgroup_is_dead()
- cgroup_for_each_live_child()
- cgroup_for_each_live_descendant_pre()
- cgroup_for_each_live_descendant_post()
Until now, these didn't need to be exposed because controllers only cared
about the css hierarchy. The planned sched_ext hierarchical scheduler
support will be based on the default cgroup hierarchy, which is in line
with the existing BPF cgroup support, and thus needs these exposed.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Fix various coding style issues across the audit subsystem flagged
by checkpatch.pl script to adhere to kernel coding standards.
Specific changes include:
- kernel/auditfilter.c: Move the open brace '{' to the previous line
for the audit_ops array declaration.
- lib/audit.c: Add a required space before the open parenthesis '('.
- include/uapi/linux/audit.h: Enclose the complex macro value for
AUDIT_UID_UNSET in parentheses.
Signed-off-by: Ricardo Robaina <rrobaina@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
show_cpu_pool_hog() only prints workers whose task is currently running
on the CPU (task_is_running()). This misses workers that are busy
processing a work item but are sleeping or blocked — for example, a
worker that clears PF_WQ_WORKER and enters wait_event_idle(). Such a
worker still occupies a pool slot and prevents progress, yet produces
an empty backtrace section in the watchdog output.
This is happening on real arm64 systems, where
toggle_allocation_gate() IPIs every single CPU in the machine (which
lacks NMI), causing workqueue stalls that show empty backtraces because
toggle_allocation_gate() is sleeping in wait_event_idle().
Remove the task_is_running() filter so every in-flight worker in the
pool's busy_hash is dumped. The busy_hash is protected by pool->lock,
which is already held.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
When diagnosing workqueue stalls, knowing how long each in-flight work
item has been executing is valuable. Add a current_start timestamp
(jiffies) to struct worker, set it when a work item begins execution in
process_one_work(), and print the elapsed wall-clock time in show_pwq().
Unlike current_at (which tracks CPU runtime and resets on wakeup for
CPU-intensive detection), current_start is never reset because the
diagnostic cares about total wall-clock time including sleeps.
Before: in-flight: 165:stall_work_fn [wq_stall]
After: in-flight: 165:stall_work_fn [wq_stall] for 100s
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The watchdog_ts name doesn't convey what the timestamp actually tracks.
This field tracks the last time a workqueue got progress.
Rename it to last_progress_ts to make it clear that it records when the
pool last made forward progress (started processing new work items).
No functional change.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
pr_cont_worker_id() checks pool->flags against WQ_BH, which is a
workqueue-level flag (defined in workqueue.h). Pool flags use a
separate namespace with POOL_* constants (defined in workqueue.c).
The correct constant is POOL_BH. Both WQ_BH and POOL_BH are defined
as (1 << 0) so this has no behavioral impact, but it is semantically
wrong and inconsistent with every other pool-level BH check in the
file.
Fixes: 4cb1ef64609f ("workqueue: Implement BH workqueues to eventually replace tasklets")
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Borislav reported a division by zero in the timekeeping code and random
hangs with the new coupled clocksource/clockevent functionality.
It turned out that the TSC clocksource is not always updating the
freq_khz field of the clocksource on registration. The coupled mode
conversion calculation requires the frequency and as it's not
initialized the resulting factor is zero or a random value. As a
consequence this causes a division by zero or random boot hangs.
Instead of chasing down all clocksources which fail to update that
member, fill it in at registration time where the caller has to supply
the frequency anyway. Except for special clocksources like jiffies which
never can have coupled mode.
To make this more robust put a check into the registration function to
validate that the caller supplied a frequency if the coupled mode
feature bit is set. If not, emit a warning and clear the feature bit.
Fixes: cd38bdb8e696 ("timekeeping: Provide infrastructure for coupled clockevents")
Reported-by: Borislav Petkov <bp@alien8.de>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Borislav Petkov <bp@alien8.de>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/87cy1jsa4m.ffs@tglx
Closes: https://lore.kernel.org/20260303213027.GA2168957@ax162
|
|
Nathan reported a boot failure after the coupled clocksource/event support
was enabled for the TSC deadline timer. It turns out that on the affected
test systems the TSC frequency is not refined against HPET, so it is
registered with the same frequency as the TSC-early clocksource.
As a consequence the update function which checks for a change of the
shift/mult pair of the clocksource fails to compute the conversion
limit, which is zero initialized. This check is there to avoid pointless
computations on every timekeeping update cycle (tick).
So the actual clockevent conversion function limits the delta expiry to
zero, which means the timer is always programmed to expire in the
past. This obviously results in a spectacular timer interrupt storm,
which goes unnoticed because the per CPU interrupts on x86 are not
exposed to the runaway detection mechanism and the NMI watchdog is not
yet functional. So the machine simply stops booting.
That did not show up in testing. All test machines refine the TSC frequency
so TSC has a differrent shift/mult pair than TSC-early and the conversion
limit is properly initialized.
Cure that by setting the conversion limit right at the point where the new
clocksource is installed.
Fixes: cd38bdb8e696 ("timekeeping: Provide infrastructure for coupled clockevents")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/87bjh4zies.ffs@tglx
Closes: https://lore.kernel.org/20260303012905.GA978396@ax162
|
|
The task ownership state machine in sched_ext is quite hard to follow
from the code alone. The interaction of ownership states, memory
ordering rules and cross-CPU "lock dancing" makes the overall model
subtle.
Extend the documentation next to scx_ops_state to provide a more
structured and self-contained description of the state transitions and
their synchronization rules.
The new reference should make the code easier to reason about and
maintain and can help future contributors understand the overall
task-ownership workflow.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
bypass_lb_cpu() reads scx_bypass_lb_intv_us and scx_slice_bypass_us
without holding any lock, in timer callback context where module
parameter writes via sysfs can happen concurrently:
min_delta_us = scx_bypass_lb_intv_us / SCX_BYPASS_LB_MIN_DELTA_DIV;
^^^^^^^^^^^^^^^^^^^^
plain read -- KCSAN data race
if (delta < DIV_ROUND_UP(min_delta_us, scx_slice_bypass_us))
^^^^^^^^^^^^^^^^^
plain read -- KCSAN data race
scx_bypass_lb_intv_us already uses READ_ONCE() in scx_bypass_lb_timerfn()
and scx_bypass() for its other lock-free read sites, leaving
bypass_lb_cpu() inconsistent. scx_slice_bypass_us has the same
lock-free access pattern in the same function.
Fix both plain reads by using READ_ONCE() to complete the concurrent
access annotation and make the code KCSAN-clean.
Signed-off-by: zhidao su <suzhidao@xiaomi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix thresh_return of function graph tracer
The update to store data on the shadow stack removed the abuse of
using the task recursion word as a way to keep track of what
functions to ignore. The trace_graph_return() was updated to handle
this, but when function_graph tracer is using a threshold (only trace
functions that took longer than a specified time), it uses
trace_graph_thresh_return() instead.
This function was still incorrectly using the task struct recursion
word causing the function graph tracer to permanently set all
functions to "notrace"
- Fix thresh_return nosleep accounting
When the calltime was moved to the shadow stack storage instead of
being on the fgraph descriptor, the calculations for the amount of
sleep time was updated. The calculation was done in the
trace_graph_thresh_return() function, which also called the
trace_graph_return(), which did the calculation again, causing the
time to be doubled.
Remove the call to trace_graph_return() as what it needed to do
wasn't that much, and just do the work in
trace_graph_thresh_return().
- Fix syscall trace event activation on boot up
The syscall trace events are pseudo events attached to the
raw_syscall tracepoints. When the first syscall event is enabled, it
enables the raw_syscall tracepoint and doesn't need to do anything
when a second syscall event is also enabled.
When events are enabled via the kernel command line, syscall events
are partially enabled as the enabling is called before rcu_init. This
is due to allow early events to be enabled immediately. Because
kernel command line events do not distinguish between different types
of events, the syscall events are enabled here but are not fully
functioning. After rcu_init, they are disabled and re-enabled so that
they can be fully enabled.
The problem happened is that this "disable-enable" is done one at a
time. If more than one syscall event is specified on the command
line, by disabling them one at a time, the counter never gets to
zero, and the raw_syscall is not disabled and enabled, keeping the
syscall events in their non-fully functional state.
Instead, disable all events and re-enabled them all, as that will
ensure the raw_syscall event is also disabled and re-enabled.
- Disable preemption in ftrace pid filtering
The ftrace pid filtering attaches to the fork and exit tracepoints to
add or remove pids that should be traced. They access variables
protected by RCU (preemption disabled). Now that tracepoint callbacks
are called with preemption enabled, this protection needs to be added
explicitly, and not depend on the functions being called with
preemption disabled.
- Disable preemption in event pid filtering
The event pid filtering needs the same preemption disabling guards as
ftrace pid filtering.
- Fix accounting of the memory mapped ring buffer on fork
Memory mapping the ftrace ring buffer sets the vm_flags to DONTCOPY.
But this does not prevent the application from calling
madvise(MADVISE_DOFORK). This causes the mapping to be copied on
fork. After the first tasks exits, the mapping is considered unmapped
by everyone. But when he second task exits, the counter goes below
zero and triggers a WARN_ON.
Since nothing prevents two separate tasks from mmapping the ftrace
ring buffer (although two mappings may mess each other up), there's
no reason to stop the memory from being copied on fork.
Update the vm_operations to have an ".open" handler to update the
accounting and let the ring buffer know someone else has it mapped.
- Add all ftrace headers in MAINTAINERS file
The MAINTAINERS file only specifies include/linux/ftrace.h But misses
ftrace_irq.h and ftrace_regs.h. Make the file use wildcards to get
all *ftrace* files.
* tag 'trace-v7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Add MAINTAINERS entries for all ftrace headers
tracing: Fix WARN_ON in tracing_buffers_mmap_close
tracing: Disable preemption in the tracepoint callbacks handling filtered pids
ftrace: Disable preemption in the tracepoint callbacks handling filtered pids
tracing: Fix syscall events activation by ensuring refcount hits zero
fgraph: Fix thresh_return nosleeptime double-adjust
fgraph: Fix thresh_return clear per-task notrace
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module fixes from Sami Tolvanen:
- Fix a potential kernel panic in the module loader by adding a bounds
check for the ELF section index. This prevents crashes if attempting
to load a module that uses SHN_XINDEX or is corrupted.
- Fix the Kconfig menu layout for module versioning, signing, and
compression options so they correctly appear as submenus in
menuconfig.
- Remove a redundant lockdep_free_key_range() call in the load_module()
error path. This is already handled by module_deallocate() calling
free_mod_mem() since the module_memory rework.
* tag 'modules-7.0-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
module: Fix kernel panic when a symbol st_shndx is out of bounds
module: Fix the modversions and signing submenus
module: Remove duplicate freeing of lockdep classes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- kthread: consolidate kthread exit paths to prevent use-after-free
- iomap:
- don't mark folio uptodate if read IO has bytes pending
- don't report direct-io retries to fserror
- reject delalloc mappings during writeback
- ns: tighten visibility checks
- netfs: Fix unbuffered/DIO writes to dispatch subrequests in strict
sequence
* tag 'vfs-7.0-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: reject delalloc mappings during writeback
iomap: don't mark folio uptodate if read IO has bytes pending
selftests: fix mntns iteration selftests
nstree: tighten permission checks for listing
nsfs: tighten permission checks for handle opening
nsfs: tighten permission checks for ns iteration ioctls
netfs: Fix unbuffered/DIO writes to dispatch subrequests in strict sequence
kthread: consolidate kthread exit paths to prevent use-after-free
iomap: don't report direct-io retries to fserror
|
|
The timekeeping_validate_timex() function validates the timex status
of an auxiliary system clock even when the status is not to be changed,
which causes unexpected errors for applications that make read-only
clock_adjtime() calls, or set some other timex fields, but without
clearing the status field.
Do the AUX-specific status validation only when the modes field contains
ADJ_STATUS, i.e. the application is actually trying to change the
status. This makes the AUX-specific clock_adjtime() behavior consistent
with CLOCK_REALTIME.
Fixes: 4eca49d0b621 ("timekeeping: Prepare do_adtimex() for auxiliary clocks")
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260225085231.276751-1-mlichvar@redhat.com
|
|
bpf_iter_scx_dsq_new() reads dsq->seq via READ_ONCE() without holding
any lock, making dsq->seq a lock-free concurrently accessed variable.
However, dispatch_enqueue(), the sole writer of dsq->seq, uses a plain
increment without the matching WRITE_ONCE() on the write side:
dsq->seq++;
^^^^^^^^^^^
plain write -- KCSAN data race
The KCSAN documentation requires that if one accessor uses READ_ONCE()
or WRITE_ONCE() on a variable to annotate lock-free access, all other
accesses must also use the appropriate accessor. A plain write leaves
the pair incomplete and will trigger KCSAN warnings.
Fix by using WRITE_ONCE() for the write side of the update:
WRITE_ONCE(dsq->seq, dsq->seq + 1);
This is consistent with bpf_iter_scx_dsq_new() and makes the
concurrent access annotation complete and KCSAN-clean.
Signed-off-by: zhidao su <suzhidao@xiaomi.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl fix from Joel Granados:
- Fix error when reporting jiffies converted values back to user space
Return the converted value instead of "Invalid argument" error
* tag 'sysctl-7.00-fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
time/jiffies: Fix sysctl file error on configurations where USER_HZ < HZ
|
|
Running stress-ng --schedpolicy 0 on an RT kernel on a big machine
might lead to the following WARNINGs (edited).
sched: DL de-boosted task PID 22725: REPLENISH flag missing
WARNING: CPU: 93 PID: 0 at kernel/sched/deadline.c:239 dequeue_task_dl+0x15c/0x1f8
... (running_bw underflow)
Call trace:
dequeue_task_dl+0x15c/0x1f8 (P)
dequeue_task+0x80/0x168
deactivate_task+0x24/0x50
push_dl_task+0x264/0x2e0
dl_task_timer+0x1b0/0x228
__hrtimer_run_queues+0x188/0x378
hrtimer_interrupt+0xfc/0x260
...
The problem is that when a SCHED_DEADLINE task (lock holder) is
changed to a lower priority class via sched_setscheduler(), it may
fail to properly inherit the parameters of potential DEADLINE donors
if it didn't already inherit them in the past (shorter deadline than
donor's at that time). This might lead to bandwidth accounting
corruption, as enqueue_task_dl() won't recognize the lock holder as
boosted.
The scenario occurs when:
1. A DEADLINE task (donor) blocks on a PI mutex held by another
DEADLINE task (holder), but the holder doesn't inherit parameters
(e.g., it already has a shorter deadline)
2. sched_setscheduler() changes the holder from DEADLINE to a lower
class while still holding the mutex
3. The holder should now inherit DEADLINE parameters from the donor
and be enqueued with ENQUEUE_REPLENISH, but this doesn't happen
Fix the issue by introducing __setscheduler_dl_pi(), which detects when
a DEADLINE (proper or boosted) task gets setscheduled to a lower
priority class. In case, the function makes the task inherit DEADLINE
parameters of the donoer (pi_se) and sets ENQUEUE_REPLENISH flag to
ensure proper bandwidth accounting during the next enqueue operation.
Fixes: 2279f540ea7d ("sched/deadline: Fix priority inheritance with multiple scheduling classes")
Reported-by: Bruno Goncalves <bgoncalv@redhat.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260302-upstream-fix-deadline-piboost-b4-v3-1-6ba32184a9e0@redhat.com
|
|
Commit 2dc164a48e6fd ("sysctl: Create converter functions with two new
macros") incorrectly returns error to user space when jiffies sysctl
converter is used. The old overflow check got replaced with an
unconditional one:
+ if (USER_HZ < HZ)
+ return -EINVAL;
which will always be true on configurations with "USER_HZ < HZ".
Remove the check; it is no longer needed as clock_t_to_jiffies() returns
ULONG_MAX for the overflow case and proc_int_u2k_conv_uop() checks for
"> INT_MAX" after conversion
Fixes: 2dc164a48e6fd ("sysctl: Create converter functions with two new macros")
Reported-by: Colm Harrington <colm.harrington@oracle.com>
Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
|
|
Support for dma scatter-gather mapping and is intended for testing
mapping performance. It achieves by introducing the dma_sg_map_param
structure and related functions, which enable the implementation of
scatter-gather mapping preparation, mapping, and unmapping operations.
Additionally, the dma_map_benchmark_ops array is updated to include
operations for scatter-gather mapping. This commit aims to provide
a wider range of mapping performance test to cater to different scenarios.
Reviewed-by: Barry Song <baohua@kernel.org>
Signed-off-by: Qinxin Xia <xiaqinxin@huawei.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260225093800.3625054-3-xiaqinxin@huawei.com
|
|
This patch adjusts the DMA map benchmark framework to make the DMA
map benchmark framework more flexible and adaptable to other mapping
modes in the future. By abstracting the framework into five interfaces:
prepare, unprepare, initialize_data, do_map, and do_unmap.
The new map schema can be introduced more easily
without major modifications to the existing code structure.
Reviewed-by: Barry Song <baohua@kernel.org>
Signed-off-by: Qinxin Xia <xiaqinxin@huawei.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260225093800.3625054-2-xiaqinxin@huawei.com
|
|
When a process forks, the child process copies the parent's VMAs but the
user_mapped reference count is not incremented. As a result, when both the
parent and child processes exit, tracing_buffers_mmap_close() is called
twice. On the second call, user_mapped is already 0, causing the function to
return -ENODEV and triggering a WARN_ON.
Normally, this isn't an issue as the memory is mapped with VM_DONTCOPY set.
But this is only a hint, and the application can call
madvise(MADVISE_DOFORK) which resets the VM_DONTCOPY flag. When the
application does that, it can trigger this issue on fork.
Fix it by incrementing the user_mapped reference count without re-mapping
the pages in the VMA's open callback.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://patch.msgid.link/20260227025842.1085206-1-wangqing7171@gmail.com
Fixes: cf9f0f7c4c5bb ("tracing: Allow user-space mapping of the ring-buffer")
Reported-by: syzbot+3b5dd2030fe08afdf65d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3b5dd2030fe08afdf65d
Tested-by: syzbot+3b5dd2030fe08afdf65d@syzkaller.appspotmail.com
Signed-off-by: Qing Wang <wangqing7171@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Filtering PIDs for events triggered the following during selftests:
[37] event tracing - restricts events based on pid notrace filtering
[ 155.874095]
[ 155.874869] =============================
[ 155.876037] WARNING: suspicious RCU usage
[ 155.877287] 7.0.0-rc1-00004-g8cd473a19bc7 #7 Not tainted
[ 155.879263] -----------------------------
[ 155.882839] kernel/trace/trace_events.c:1057 suspicious rcu_dereference_check() usage!
[ 155.889281]
[ 155.889281] other info that might help us debug this:
[ 155.889281]
[ 155.894519]
[ 155.894519] rcu_scheduler_active = 2, debug_locks = 1
[ 155.898068] no locks held by ftracetest/4364.
[ 155.900524]
[ 155.900524] stack backtrace:
[ 155.902645] CPU: 1 UID: 0 PID: 4364 Comm: ftracetest Not tainted 7.0.0-rc1-00004-g8cd473a19bc7 #7 PREEMPT(lazy)
[ 155.902648] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
[ 155.902651] Call Trace:
[ 155.902655] <TASK>
[ 155.902659] dump_stack_lvl+0x67/0x90
[ 155.902665] lockdep_rcu_suspicious+0x154/0x1a0
[ 155.902672] event_filter_pid_sched_process_fork+0x9a/0xd0
[ 155.902678] kernel_clone+0x367/0x3a0
[ 155.902689] __x64_sys_clone+0x116/0x140
[ 155.902696] do_syscall_64+0x158/0x460
[ 155.902700] ? entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 155.902702] ? trace_irq_disable+0x1d/0xc0
[ 155.902709] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 155.902711] RIP: 0033:0x4697c3
[ 155.902716] Code: 1f 84 00 00 00 00 00 64 48 8b 04 25 10 00 00 00 45 31 c0 31 d2 31 f6 bf 11 00 20 01 4c 8d 90 d0 02 00 00 b8 38 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 35 89 c2 85 c0 75 2c 64 48 8b 04 25 10 00 00
[ 155.902718] RSP: 002b:00007ffc41150428 EFLAGS: 00000246 ORIG_RAX: 0000000000000038
[ 155.902721] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004697c3
[ 155.902722] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000001200011
[ 155.902724] RBP: 0000000000000000 R08: 0000000000000000 R09: 000000003fccf990
[ 155.902725] R10: 000000003fccd690 R11: 0000000000000246 R12: 0000000000000001
[ 155.902726] R13: 000000003fce8103 R14: 0000000000000001 R15: 0000000000000000
[ 155.902733] </TASK>
[ 155.902747]
The tracepoint callbacks recently were changed to allow preemption. The
event PID filtering callbacks that were attached to the fork and exit
tracepoints expected preemption disabled in order to access the RCU
protected PID lists.
Add a guard(preempt)() to protect the references to the PID list.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260303215738.6ab275af@fedora
Fixes: a46023d5616e ("tracing: Guard __DECLARE_TRACE() use of __DO_TRACE_CALL() with SRCU-fast")
Link: https://patch.msgid.link/20260303131706.96057f61a48a34c43ce1e396@kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When function trace PID filtering is enabled, the function tracer will
attach a callback to the fork tracepoint as well as the exit tracepoint
that will add the forked child PID to the PID filtering list as well as
remove the PID that is exiting.
Commit a46023d5616e ("tracing: Guard __DECLARE_TRACE() use of
__DO_TRACE_CALL() with SRCU-fast") removed the disabling of preemption
when calling tracepoint callbacks.
The callbacks used for the PID filtering accounting depended on preemption
being disabled, and now the trigger a "suspicious RCU usage" warning message.
Make them explicitly disable preemption.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260302213546.156e3e4f@gandalf.local.home
Fixes: a46023d5616e ("tracing: Guard __DECLARE_TRACE() use of __DO_TRACE_CALL() with SRCU-fast")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
When multiple syscall events are specified in the kernel command line
(e.g., trace_event=syscalls:sys_enter_openat,syscalls:sys_enter_close),
they are often not captured after boot, even though they appear enabled
in the tracing/set_event file.
The issue stems from how syscall events are initialized. Syscall
tracepoints require the global reference count (sys_tracepoint_refcount)
to transition from 0 to 1 to trigger the registration of the syscall
work (TIF_SYSCALL_TRACEPOINT) for tasks, including the init process (pid 1).
The current implementation of early_enable_events() with disable_first=true
used an interleaved sequence of "Disable A -> Enable A -> Disable B -> Enable B".
If multiple syscalls are enabled, the refcount never drops to zero,
preventing the 0->1 transition that triggers actual registration.
Fix this by splitting early_enable_events() into two distinct phases:
1. Disable all events specified in the buffer.
2. Enable all events specified in the buffer.
This ensures the refcount hits zero before re-enabling, allowing syscall
events to be properly activated during early boot.
The code is also refactored to use a helper function to avoid logic
duplication between the disable and enable phases.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260224023544.1250787-1-hehuiwen@kylinos.cn
Fixes: ce1039bd3a89 ("tracing: Fix enabling of syscall events on the command line")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
trace_graph_thresh_return() called handle_nosleeptime() and then delegated
to trace_graph_return(), which calls handle_nosleeptime() again. When
sleep-time accounting is disabled this double-adjusts calltime and can
produce bogus durations (including underflow).
Fix this by computing rettime once, applying handle_nosleeptime() only
once, using the adjusted calltime for threshold comparison, and writing
the return event directly via __trace_graph_return() when the threshold is
met.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260221113314048jE4VRwIyZEALiYByGK0My@zte.com.cn
Fixes: 3c9880f3ab52b ("ftrace: Use a running sleeptime instead of saving on shadow stack")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
When tracing_thresh is enabled, function graph tracing uses
trace_graph_thresh_return() as the return handler. Unlike
trace_graph_return(), it did not clear the per-task TRACE_GRAPH_NOTRACE
flag set by the entry handler for set_graph_notrace addresses. This could
leave the task permanently in "notrace" state and effectively disable
function graph tracing for that task.
Mirror trace_graph_return()'s per-task notrace handling by clearing
TRACE_GRAPH_NOTRACE and returning early when set.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260221113007819YgrZsMGABff4Rc-O_fZxL@zte.com.cn
Fixes: b84214890a9bc ("function_graph: Move graph notrace bit to shadow stack global var")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The root cause of this bug is that when 'bpf_link_put' reduces the
refcount of 'shim_link->link.link' to zero, the resource is considered
released but may still be referenced via 'tr->progs_hlist' in
'cgroup_shim_find'. The actual cleanup of 'tr->progs_hlist' in
'bpf_shim_tramp_link_release' is deferred. During this window, another
process can cause a use-after-free via 'bpf_trampoline_link_cgroup_shim'.
Based on Martin KaFai Lau's suggestions, I have created a simple patch.
To fix this:
Add an atomic non-zero check in 'bpf_trampoline_link_cgroup_shim'.
Only increment the refcount if it is not already zero.
Testing:
I verified the fix by adding a delay in
'bpf_shim_tramp_link_release' to make the bug easier to trigger:
static void bpf_shim_tramp_link_release(struct bpf_link *link)
{
/* ... */
if (!shim_link->trampoline)
return;
+ msleep(100);
WARN_ON_ONCE(bpf_trampoline_unlink_prog(&shim_link->link,
shim_link->trampoline, NULL));
bpf_trampoline_put(shim_link->trampoline);
}
Before the patch, running a PoC easily reproduced the crash(almost 100%)
with a call trace similar to KaiyanM's report.
After the patch, the bug no longer occurs even after millions of
iterations.
Fixes: 69fd337a975c ("bpf: per-cgroup lsm flavor")
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Closes: https://lore.kernel.org/bpf/3c4ebb0b.46ff8.19abab8abe2.Coremail.kaiyanm@hust.edu.cn/
Signed-off-by: Lang Xu <xulang@uniontech.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/279EEE1BA1DDB49D+20260303095217.34436-1-xulang@uniontech.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix circular locking dependency in cpuset partition code by
deferring housekeeping_update() calls to a workqueue instead
of calling them directly under cpus_read_lock
- Fix null-ptr-deref in rebuild_sched_domains_cpuslocked() when
generate_sched_domains() returns NULL due to kmalloc failure
- Fix incorrect cpuset behavior for effective_xcpus in
partition_xcpus_del() and cpuset_update_tasks_cpumask()
in update_cpumasks_hier()
- Fix race between task migration and cgroup iteration
* tag 'cgroup-for-7.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: fix null-ptr-deref in rebuild_sched_domains_cpuslocked
cgroup/cpuset: Call housekeeping_update() without holding cpus_read_lock
cgroup/cpuset: Defer housekeeping_update() calls from CPU hotplug to workqueue
cgroup/cpuset: Move housekeeping_update()/rebuild_sched_domains() together
kselftest/cgroup: Simplify test_cpuset_prs.sh by removing "S+" command
cgroup/cpuset: Set isolated_cpus_updating only if isolated_cpus is changed
cgroup/cpuset: Clarify exclusion rules for cpuset internal variables
cgroup/cpuset: Fix incorrect use of cpuset_update_tasks_cpumask() in update_cpumasks_hier()
cgroup/cpuset: Fix incorrect change to effective_xcpus in partition_xcpus_del()
cgroup: fix race between task migration and iteration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix starvation of scx_enable() under fair-class saturation by
offloading the enable path to an RT kthread
- Fix out-of-bounds access in idle mask initialization on systems with
non-contiguous NUMA node IDs
- Fix a preemption window during scheduler exit and a refcount
underflow in cgroup init error path
- Fix SCX_EFLAG_INITIALIZED being a no-op flag
- Add READ_ONCE() annotations for KCSAN-clean lockless accesses and
replace naked scx_root dereferences with container_of() in kobject
callbacks
- Tooling and selftest fixes: compilation issues with clang 17,
strtoul() misuse, unused options cleanup, and Kconfig sync
* tag 'sched_ext-for-7.0-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Fix starvation of scx_enable() under fair-class saturation
sched_ext: Remove redundant css_put() in scx_cgroup_init()
selftests/sched_ext: Fix peek_dsq.bpf.c compile error for clang 17
selftests/sched_ext: Add -fms-extensions to bpf build flags
tools/sched_ext: Add -fms-extensions to bpf build flags
sched_ext: Use READ_ONCE() for plain reads of scx_watchdog_timeout
sched_ext: Replace naked scx_root dereferences in kobject callbacks
sched_ext: Use READ_ONCE() for the read side of dsq->nr update
tools/sched_ext: fix strtoul() misuse in scx_hotplug_seq()
sched_ext: Fix SCX_EFLAG_INITIALIZED being a no-op flag
sched_ext: Fix out-of-bounds access in scx_idle_init_masks()
sched_ext: Disable preemption between scx_claim_exit() and kicking helper work
tools/sched_ext: Add Kconfig to sync with upstream
tools/sched_ext: Sync README.md Kconfig with upstream scx
selftests/sched_ext: Remove duplicated unistd.h include in rt_stall.c
tools/sched_ext: scx_sdt: Remove unused '-f' option
tools/sched_ext: scx_central: Remove unused '-p' option
selftests/sched_ext: Fix unused-result warning for read()
selftests/sched_ext: Abort test loop on signal
|
|
During scx_enable(), the READY -> ENABLED task switching loop changes the
calling thread's sched_class from fair to ext. Since fair has higher
priority than ext, saturating fair-class workloads can indefinitely starve
the enable thread, hanging the system. This was introduced when the enable
path switched from preempt_disable() to scx_bypass() which doesn't protect
against fair-class starvation. Note that the original preempt_disable()
protection wasn't complete either - in partial switch modes, the calling
thread could still be starved after preempt_enable() as it may have been
switched to ext class.
Fix it by offloading the enable body to a dedicated system-wide RT
(SCHED_FIFO) kthread which cannot be starved by either fair or ext class
tasks. scx_enable() lazily creates the kthread on first use and passes the
ops pointer through a struct scx_enable_cmd containing the kthread_work,
then synchronously waits for completion.
The workfn runs on a different kthread from sch->helper (which runs
disable_work), so it can safely flush disable_work on the error path
without deadlock.
Fixes: 8c2090c504e9 ("sched_ext: Initialize in bypass mode")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Global subprogs are currently not allowed to return void. Adjust
verifier logic to allow global functions with a void return type.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260228184759.108145-5-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
