| Age | Commit message (Collapse) | Author |
|---|
|
commit 786d2d84416a9a1c1a47b71a68d679d886284be2 upstream.
module_extend_max_pages() calls kvrealloc() internally and returns
-ENOMEM on allocation failure. The return value is never checked.
If the initial allocation fails, info->pages remains NULL and
info->max_pages remains 0. Subsequent calls to module_get_next_page()
will attempt to dynamically grow the array by calling
module_extend_max_pages(info, 0) since info->used_pages is 0. This
results in kvrealloc(NULL, 0) returning ZERO_SIZE_PTR, which is treated
as a success, leading to a dereference of ZERO_SIZE_PTR and a kernel
oops.
Fix: add the missing error check after module_extend_max_pages() and
return immediately on failure. This matches the pattern used by every
other kvrealloc() caller in the module loading path.
Fixes: b1ae6dc41eaa ("module: add in-kernel support for decompressing")
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Andrii Kuchmenko <capyenglishlite@gmail.com>
Reviewed-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
[Sami: Corrected the analysis in the commit message.]
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 65dfde57d1e29ce2b76fc23dd565eccd5c0bc0f0 upstream.
The function calculates new_len as len << 1 for hex encoding. This
has two overflow risks: the shift itself can overflow when len is
large, and the result can be truncated when assigned to new_len
(declared as int) from the size_t calculation.
Fix by using check_shl_overflow() to catch shift overflow and
changing new_len and loop counter i to size_t to prevent truncation.
Cc: stable@vger.kernel.org
Fixes: 168b7173959f ("AUDIT: Clean up logging of untrusted strings")
Reviewed-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Ricardo Robaina <rrobaina@redhat.com>
[PM: remove vertical whitspace noise]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0a6070839b1ef276d5b05bedfb787743e140fb17 upstream.
String event fields are not necessarily NUL-terminated, so the filter
predicate functions (filter_pred_string(), filter_pred_strloc() and
filter_pred_strrelloc()) pass the field length to the regex match
callbacks, and the length-aware matchers honour it.
regex_match_glob() was the exception: it ignored the length and called
glob_match(), which scans the string until it hits a NUL byte. Some
string fields are not NUL-terminated. One example is the dynamic char
array of the xfs_* namespace tracepoints, which is copied without a
trailing NUL. For such a field, glob matching reads past the end of
the event field, causing a KASAN slab-out-of-bounds read in
glob_match(), reached via regex_match_glob() and filter_match_preds()
from the xfs_lookup tracepoint.
Add a length-bounded glob_match_len() and use it from regex_match_glob()
so glob matching always stops at the field boundary. The matching loop
is factored into a shared helper so glob_match() keeps its behaviour.
Fixes: 60f1d5e3bac4 ("ftrace: Support full glob matching")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/da1aaf125fc3b63320b0c540fd6afa7c3d5b4f1a.1782836943.git.hhhuang@smu.edu.sg
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Assisted-by: Codex:GPT-5.4
Signed-off-by: Huihui Huang <hhhuang@smu.edu.sg>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b9452b594fd3aecbfd4aa0a6a1f741330a37dab7 upstream.
btf_parse_struct_metas() walks user-supplied BTF during BPF_BTF_LOAD,
and btf_repeat_fields() expands repeatable fields from array elements
into the fixed BTF_FIELDS_MAX scratch array used by btf_parse_fields().
The remaining-capacity check performs the expanded field count calculation
in u32. A malformed BTF can wrap that calculation, causing the check to
pass even when the expanded field count exceeds the scratch array
capacity. The following memcpy() can then write past the end of the
array.
Use checked addition and multiplication before copying repeated fields
and reject impossible counts.
Fixes: 797d73ee232d ("bpf: Check the remaining info_cnt before repeating btf fields")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Moses <p@1g4.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260605234301.1109063-1-p@1g4.org
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2566c3b24219c5b30e35205cba029ff34ff7c78b upstream.
Commit 4e63acdff864 ("bpf: Introduce bpf_sysctl_{get,set}_new_value
helpers") changed the success return value to 0, but failed to update the
corresponding check in __cgroup_bpf_run_filter_sysctl(). Since
bpf_prog_run_array_cg() now returns 0 on success, the legacy ret == 1
condition is never satisfied. As a result, the modified value is ignored,
and bpf_sysctl_set_new_value() fails to replace the write buffer.
Fix this by checking for a return value of 0 instead, so cgroup/sysctl
programs can correctly replace the pending sysctl buffer.
This bug was discovered during a manual code review. Tested via a
cgroup/sysctl BPF reproducer overriding writes to a target sysctl.
Pre-fix, bpf_sysctl_set_new_value("foo") was silently ignored: the write
returned 8192 and the value remained "600". Post-fix, the BPF replacement
buffer properly propagates: the write returns 3 and the value updates to
"foo".
Fixes: f10d05966196 ("bpf: Make BPF_PROG_RUN_ARRAY return -err instead of allow boolean")
Cc: stable@vger.kernel.org
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260603105317.944304-4-dawei.feng@seu.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aa496720618f1a6054f1c870bf10b4f6c99bf656 upstream.
Devmap broadcast redirects clone the packet for all but the last
destination.
For native XDP, that clone path copies only the linear xdp_frame data,
while fragmented frames keep skb_shared_info in tailroom outside the
linear area. Cloning such a frame leaves XDP_FLAGS_HAS_FRAGS set but
without valid frag metadata, and the later free path can interpret
uninitialized tail data as skb_shared_info, leading to an out-of-bounds
access during frame return.
Reject fragmented native XDP frames in dev_map_enqueue_clone().
Add the same restriction to the generic XDP clone path in
dev_map_redirect_clone(). Generic XDP represents fragmented packets as
nonlinear skbs, and rejecting them here keeps clone-based broadcast
support aligned between native and generic XDP.
Fixes: e624d4ed4aa8 ("xdp: Extend xdp_redirect_map with broadcast support")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Assisted-by: Codex:GPT-5.4
Signed-off-by: Zhao Zhang <zzhan461@ucr.edu>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/21c2d153dd25603d359069a02bf06779b51f6423.1780385378.git.zzhan461@ucr.edu
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 87bd2ad568e15b90d5f7d4bcd70342d05dad649c upstream.
In do_cpu_nanosleep(), posix_cpu_timer_create() takes a pid reference
via get_pid() and stores it in timer.it.cpu.pid. If the subsequent
posix_cpu_timer_set() call fails, the function returns immediately
without calling posix_cpu_timer_del() to release the pid reference,
causing a leak.
Fix it by calling posix_cpu_timer_del() before the unlock-and-return
on the error path, consistent with the other exit paths in the same
function.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260611161738.97043-1-vulab@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dd29c017aed628076e915fe4cdfb5392fd4c5cab upstream.
RT migration is done aggressively. When a CPU schedules out a high
priority RT task for a lower priority task, it will look to see if there's
any RT tasks that are waiting to run on another CPU that is of higher
priority than the task this CPU is about to run. If it finds one, it will
pull that task over to the CPU and allow it to run there instead.
Normally, this pulling is done by looking at the RT overloaded mask (rto)
which contains all the CPUs in the scheduler domain with RT tasks that are
waiting to run due to a higher priority RT task currently running on their
CPU. The CPU that is about to schedule a lower priority task will grab the
rq lock of the overloaded CPU and move the RT task from that CPU's runqueue
to the local one and schedule the higher priority RT task.
This caused issues when a lot of CPUs would schedule a lower priority task
at the same time. They would all try to grab the same runqueue lock of
the CPU with the overloaded RT tasks. Only the first CPU that got in will
get that task. All the others would wait until they got the runqueue lock
and see there's nothing to pull and do nothing. On systems with lots of
CPUs, this caused a large latency (up to 500us) which is beyond what
PREEMPT_RT is to allow.
The solution to that was to create an RT_PUSH_IPI logic. When any CPU
wanted to pull a task, instead of grabbing the runqueue lock of the
overloaded CPU, it would start by sending an IPI to the overloaded CPU,
and that IPI handler would have the CPU with the waiting RT task do a push
instead. Then that handler would send an IPI to the next CPU with
overloaded RT tasks, and so on. Note, after the first CPU starts this
process, if another CPU wanted to do a pull, it would see that the process
has already begun and would only increment a counter to have the IPIs
continue again.
The RT_PUSH_IPI solved the latency problem with PREEMPT_RT but could cause
a new issue with non PREEMPT_RT. Namely, softirqs run in a threaded
context on PREEMPT_RT but they can run in an interrupt context in non-RT.
If an IPI lands on a CPU that has just woken up multiple RT tasks and the
current CPU is running a non RT or a low priority RT task, instead of
doing a push, it would simply do a schedule on that CPU. But if a softirq
was also executing on this CPU, the schedule would need to wait until the
softirq finished. Until then, the CPU would still be considered overloaded
as there are RT tasks still waiting to run on it.
A live lock occurred on a workload that was doing heavy networking traffic
on a large machine where the softirqs would run 500us out of 750us. And it
would also be waking up RT tasks, causing the RT pull logic to be
constantly executed.
When a softirq triggered on a CPU with RT tasks queued but not running
yet, and the other CPUs would see this CPU as being overloaded, they would
send an IPI over to it. The CPU would notice that the waiting RT tasks are
of higher priority than the currently running task and simply schedule
that CPU instead. But because the softirq was executing, before it could
schedule, it would receive another IPI to do the same. The amount of IPIs
would slow down the currently running softirq so much that before it could
return back to task context, it would execute another softirq never
allowing the CPU to schedule. This live locked that CPU.
As RT_PUSH_IPI was created to help PREEMPT_RT, make it default off if
PREEMPT_RT is not enabled.
Fixes: b6366f048e0c ("sched/rt: Use IPI to trigger RT task push migration instead of pulling")
Closes: https://lore.kernel.org/all/20260506235716.2530720-1-tj@kernel.org/
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260515103740.25ccbed8@gandalf.local.home
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c9a71daaecb2fb1d8c704545cc0b1c920b9bf5d7 upstream.
Multiple readers access audit_queue.qlen via skb_queue_len() without
holding the queue lock or using READ_ONCE(), while kauditd writes to
this field via the skb_dequeue() → __skb_unlink() path with WRITE_ONCE()
protected by a spinlock. This constitutes data races.
All affected skb_queue_len(&audit_queue) call sites:
- kauditd_thread() wait_event_freezable() condition
- audit_receive_msg() AUDIT_GET handler (s.backlog assignment)
- audit_receive() backlog check
- audit_log_start() backlog check and pr_warn()
KCSAN reports the following conflicting access pattern (one example):
==================================================================
BUG: KCSAN: data-race in audit_log_start / skb_dequeue
write (marked) to 0xffffffff8512ee20 of 4 bytes by task 661 on cpu 57:
skb_dequeue+0x70/0xf0
kauditd_send_queue+0x71/0x220
kauditd_thread+0x1cb/0x430
kthread+0x1c2/0x210
ret_from_fork+0x162/0x1a0
ret_from_fork_asm+0x1a/0x30
read to 0xffffffff8512ee20 of 4 bytes by task 36586 on cpu 1:
audit_log_start+0x2a0/0x6b0
audit_core_dumps+0x64/0xa0
do_coredump+0x14b/0x1260
get_signal+0xeb2/0xf70
arch_do_signal_or_restart+0x41/0x170
exit_to_user_mode_loop+0xa2/0x1c0
do_syscall_64+0x1a3/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0xe0
value changed: 0x00000001 -> 0x00000000
==================================================================
Resolve the race by switching to lockless helper skb_queue_len_lockless(),
which internally uses READ_ONCE() and properly pairs with the WRITE_ONCE()
write accesses already present on the writer side.
Cc: stable@vger.kernel.org
Fixes: 3197542482df ("audit: rework audit_log_start()")
Signed-off-by: Chi Wang <wangchi@kylinos.cn>
Reviewed-by: Ricardo Robaina <rrobaina@redhat.com>
[PM: line length tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 037a3c43edfb597665dd34457cd22b14692f2ba3 ]
perf_event_remove_on_exec() removes events by calling
perf_event_exit_event(). For top-level events, this removes the event from
the context with DETACH_EXIT only.
This can leave inconsistent group state when a removed event is a group
leader and the group contains siblings without remove_on_exec. If the group
was active, the surviving siblings can remain active and attached to the
removed leader's sibling list, but are no longer represented by a valid
group leader on the PMU context active lists.
A later close of the removed leader uses DETACH_GROUP and can promote the
still-active siblings from this stale group state. The next schedule-in can
then add an already-linked active_list entry again, corrupting the PMU
context active list.
With DEBUG_LIST enabled, this is caught as a list_add double-add in
merge_sched_in().
Fix this by detaching group relationships when remove_on_exec removes an
event. This preserves the existing task-exit and revoke behavior, while
ensuring surviving siblings are ungrouped before the removed event leaves
the context.
Fixes: 2e498d0a74e5 ("perf: Add support for event removal on exec")
Signed-off-by: Taeyang Lee <0wn@theori.io>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/ai65GgZcC0LAlWLG@Taeyangs-MacBook-Pro.local
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
the lock->wait_lock
[ Upstream commit 4a077914578183ec397ad09f7156a357e00e5d72 ]
Bert reported seeing occasional boot hangs when running with
PREEPT_RT and bisected it down to commit 894d1b3db41c
("locking/mutex: Remove wakeups from under mutex::wait_lock").
It looks like I missed a few spots where we drop the wait_lock and
potentially call into schedule without waking up the tasks on the
wake_q structure. Since the tasks being woken are ww_mutex tasks
they need to be able to run to release the mutex and unblock the
task that currently is planning to wake them. Thus we can deadlock.
So make sure we wake the wake_q tasks when we unlock the wait_lock.
Closes: https://lore.kernel.org/lkml/20241211182502.2915-1-spasswolf@web.de
Fixes: 894d1b3db41c ("locking/mutex: Remove wakeups from under mutex::wait_lock")
Reported-by: Bert Karwatzki <spasswolf@web.de>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20241212222138.2400498-1-jstultz@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
recently backport of ("perf: Fix dangling cgroup pointer in cpuctx")
use a middle version, so aligned with the upstream commit:
commit 3b7a34aebbdf ("perf: Fix dangling cgroup pointer in cpuctx")
This is a fix for stable v6.12.94 backport commit, so no upstream commit.
Link: https://lore.kernel.org/all/2026070200-uneaten-smock-4130@gregkh/
Fixes: 46f5623f9b0e ("perf: Fix dangling cgroup pointer in cpuctx")
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 82f9cc094975240885c93effbca7f4603f5de1bf upstream.
Anders had bisected a crash using PREEMPT_RT with linux-next and
isolated it down to commit 894d1b3db41c ("locking/mutex: Remove
wakeups from under mutex::wait_lock"), where it seemed the
wake_q structure was somehow getting corrupted causing a null
pointer traversal.
I was able to easily repoduce this with PREEMPT_RT and managed
to isolate down that through various call stacks we were
actually calling wake_up_q() twice on the same wake_q.
I found that in the problematic commit, I had added the
wake_up_q() call in task_blocks_on_rt_mutex() around
__ww_mutex_add_waiter(), following a similar pattern in
__mutex_lock_common().
However, its just wrong. We haven't dropped the lock->wait_lock,
so its contrary to the point of the original patch. And it
didn't match the __mutex_lock_common() logic of re-initializing
the wake_q after calling it midway in the stack.
Looking at it now, the wake_up_q() call is incorrect and should
just be removed. So drop the erronious logic I had added.
Fixes: 894d1b3db41c ("locking/mutex: Remove wakeups from under mutex::wait_lock")
Closes: https://lore.kernel.org/lkml/6afb936f-17c7-43fa-90e0-b9e780866097@app.fastmail.com/
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20241114190051.552665-1-jstultz@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4c21b5927d4364bfe7365f2700da5fea0ed0d004 upstream.
proc_sys_call_handler() allocates its temporary sysctl buffer with
kvzalloc() and passes it to __cgroup_bpf_run_filter_sysctl(). Since
kvzalloc() may fall back to vmalloc() for large allocations, freeing
that buffer with kfree() is wrong and can corrupt memory.
Use kvfree() to safely handle both kmalloc and kvzalloc()/vmalloc
allocations.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc5.
Reproduced the bug based on v7.1-rc4 in a QEMU x86_64 guest booted with
KASAN and CONFIG_FAILSLAB enabled. To exercise the replacement path, the
test tree also included the accompanying fix for the stale ret == 1
check in __cgroup_bpf_run_filter_sysctl(). The reproducer confines
failslab injections to the proc_sys_call_handler() range, uses
stacktrace-depth=32, and injects fail-nth=1 while writing 8191 bytes to
/proc/sys/kernel/domainname from a task in the target cgroup. Under
that setup, fail-nth=1 triggered the fault:
BUG: unable to handle page fault for address: ffffeb0200024d48
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 SMP KASAN NOPTI
CPU: 2 UID: 0 PID: 209 Comm: repro_proc_sys_ Not tainted 7.1.0-rc4-00686-g97625979a5d4 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
RIP: 0010:kfree+0x6e/0x510
...
Call Trace:
<TASK>
? __cgroup_bpf_run_filter_sysctl+0x626/0xc30
__cgroup_bpf_run_filter_sysctl+0x74d/0xc30
? __pfx___cgroup_bpf_run_filter_sysctl+0x10/0x10
? srso_return_thunk+0x5/0x5f
? __kvmalloc_node_noprof+0x345/0x870
? proc_sys_call_handler+0x250/0x480
? srso_return_thunk+0x5/0x5f
proc_sys_call_handler+0x3a2/0x480
? __pfx_proc_sys_call_handler+0x10/0x10
? srso_return_thunk+0x5/0x5f
? selinux_file_permission+0x39f/0x500
? srso_return_thunk+0x5/0x5f
? lock_is_held_type+0x9e/0x120
vfs_write+0x98e/0x1000
...
</TASK>
With this fix applied on top of the same test setup, rerunning the
reproducer with fail-nth=1 yields no corresponding Oops reports.
Fixes: 4508943794ef ("proc: use kvzalloc for our kernel buffer")
Cc: stable@vger.kernel.org
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Dawei Feng <dawei.feng@seu.edu.cn>
Link: https://lore.kernel.org/r/20260603105317.944304-3-dawei.feng@seu.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fad156c2af227f42ca796cbb20ddc354a6dd9932 upstream.
blk_time_get_ns() caches ktime_get_ns() in current->plug->cur_ktime
and marks the task with PF_BLOCK_TS. That cache is only valid while the
task keeps running; if the task is switched out, wall-clock time
advances and the cached value must not be reused when the task runs again.
The existing invalidation covers explicit plug flushes through
__blk_flush_plug(), and the schedule() / rtmutex paths through
sched_update_worker(). It does not cover in-kernel preemption paths such
as preempt_schedule(), preempt_schedule_notrace(), and
preempt_schedule_irq(), which enter __schedule(SM_PREEMPT) directly and
return without calling sched_update_worker().
As a result, a task preempted while holding a plug with PF_BLOCK_TS set
can reuse a stale plug->cur_ktime after it is scheduled back in. blk-iocost
then consumes that stale timestamp through ioc_now(), producing stale vnow
values for throttle decisions, and through ioc_rqos_done(), inflating
on-queue time and feeding false missed-QoS samples into vrate
adjustment.
Move the schedule-side invalidation to finish_task_switch(), which runs
for the scheduled-in task after every actual context switch regardless
of which schedule entry point was used. Keep __blk_flush_plug() as the
explicit flush/finish-plug invalidation path, and remove only the
PF_BLOCK_TS handling from sched_update_worker().
Fixes: 06b23f92af87 ("block: update cached timestamp post schedule/preemption")
Cc: stable@vger.kernel.org
Signed-off-by: Usama Arif <usama.arif@linux.dev>
Link: https://patch.msgid.link/20260616141604.328820-3-usama.arif@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fd38b75c4b43295b10d69772a46d1c74dbd6fc81 upstream.
PF_BLOCK_TS is only set in blk_time_get_ns() when current->plug is
non-NULL, and blk_finish_plug() clears it via __blk_flush_plug()
before NULLing the plug pointer. copy_process() breaks the
invariant by inheriting PF_BLOCK_TS from the parent while resetting
the child's plug to NULL.
Clear PF_BLOCK_TS alongside that assignment so callers can rely on
"PF_BLOCK_TS set implies current->plug != NULL" and dereference
current->plug unguarded.
Fixes: 06b23f92af87 ("block: update cached timestamp post schedule/preemption")
Cc: stable@vger.kernel.org
Signed-off-by: Usama Arif <usama.arif@linux.dev>
Link: https://patch.msgid.link/20260616141604.328820-2-usama.arif@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit da0f622b344be769ed61e7c1caf95cd0cdb47964 ]
As kaslr_offset() is architecture dependent and also may not be defined by
all architectures, when zeroing out unused weak functions, do not check
against kaslr_offset(), but instead check if the address is within the
kernel text sections. If KASLR added a shift to the zeroed out function,
it would still not be located in the kernel text. This is a more robust
way to test if the text is valid or not.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: "Arnd Bergmann" <arnd@arndb.de>
Link: https://lore.kernel.org/20250225182054.471759017@goodmis.org
Fixes: ef378c3b8233 ("scripts/sorttable: Zero out weak functions in mcount_loc table")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Mark Brown <broonie@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/20250224180805.GA1536711@ax162/
Closes: https://lore.kernel.org/all/5225b07b-a9b2-4558-9d5f-aa60b19f6317@sirena.org.uk/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6eeca746fa5f1dd03c6ee05cb03f5eb1ddda1c81 ]
The addresses in the mcount_loc can be zeroed and then moved by KASLR
making them invalid addresses. ftrace_call_addr() for ARM 64 expects a
valid address to kernel text. If the addr read from the mcount_loc section
is invalid, it must not call ftrace_call_addr(). Move the addr check
before calling ftrace_call_addr() in ftrace_process_locs().
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/20250225182054.290128736@goodmis.org
Fixes: ef378c3b8233 ("scripts/sorttable: Zero out weak functions in mcount_loc table")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: "Arnd Bergmann" <arnd@arndb.de>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Closes: https://lore.kernel.org/all/20250225025631.GA271248@ax162/
Closes: https://lore.kernel.org/all/91523154-072b-437b-bbdc-0b70e9783fd0@app.fastmail.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit be55257fab181b93af38f8c4b1b3cb453a78d742 ]
The pg_remaining calculation in ftrace_process_locs() assumes that
ENTRIES_PER_PAGE multiplied by 2^order equals the actual capacity of the
allocated page group. However, ENTRIES_PER_PAGE is PAGE_SIZE / ENTRY_SIZE
(integer division). When PAGE_SIZE is not a multiple of ENTRY_SIZE (e.g.
4096 / 24 = 170 with remainder 16), high-order allocations (like 256 pages)
have significantly more capacity than 256 * 170. This leads to pg_remaining
being underestimated, which in turn makes skip (derived from skipped -
pg_remaining) larger than expected, causing the WARN(skip != remaining)
to trigger.
Extra allocated pages for ftrace: 2 with 654 skipped
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:7295 ftrace_process_locs+0x5bf/0x5e0
A similar problem in ftrace_allocate_records() can result in allocating
too many pages. This can trigger the second warning in
ftrace_process_locs().
Extra allocated pages for ftrace
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:7276 ftrace_process_locs+0x548/0x580
Use the actual capacity of a page group to determine the number of pages
to allocate. Have ftrace_allocate_pages() return the number of allocated
pages to avoid having to calculate it. Use the actual page group capacity
when validating the number of unused pages due to skipped entries.
Drop the definition of ENTRIES_PER_PAGE since it is no longer used.
Cc: stable@vger.kernel.org
Fixes: 4a3efc6baff93 ("ftrace: Update the mcount_loc check of skipped entries")
Link: https://patch.msgid.link/20260113152243.3557219-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 264143c4e54412095f4b615e65bf736fc3c60af0 ]
The amount of memory that ftrace uses to save the descriptors to manage
the functions it can trace is shown at output. But if there are a lot of
functions that are skipped because they were weak or the architecture
added holes into the tables, then the extra pages that were allocated are
freed. But these freed pages are not reflected in the numbers shown, and
they can even be inconsistent with what is reported:
ftrace: allocating 57482 entries in 225 pages
ftrace: allocated 224 pages with 3 groups
The above shows the number of original entries that are in the mcount_loc
section and the pages needed to save them (225), but the second output
reflects the number of pages that were actually used. The two should be
consistent as:
ftrace: allocating 56739 entries in 224 pages
ftrace: allocated 224 pages with 3 groups
The above also shows the accurate number of entires that were actually
stored and does not include the entries that were removed.
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250218200023.221100846@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4a3efc6baff931da9a85c6d2e42c87bd9a827399 ]
Now that weak functions turn into skipped entries, update the check to
make sure the amount that was allocated would fit both the entries that
were allocated as well as those that were skipped.
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250218200023.055162048@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ef378c3b8233855497a414b9d67bf22592c928a4 ]
When a function is annotated as "weak" and is overridden, the code is not
removed. If it is traced, the fentry/mcount location in the weak function
will be referenced by the "__mcount_loc" section. This will then be added
to the available_filter_functions list. Since only the address of the
functions are listed, to find the name to show, a search of kallsyms is
used.
Since kallsyms will return the function by simply finding the function
that the address is after but before the next function, an address of a
weak function will show up as the function before it. This is because
kallsyms does not save names of weak functions. This has caused issues in
the past, as now the traced weak function will be listed in
available_filter_functions with the name of the function before it.
At best, this will cause the previous function's name to be listed twice.
At worse, if the previous function was marked notrace, it will now show up
as a function that can be traced. Note that it only shows up that it can
be traced but will not be if enabled, which causes confusion.
https://lore.kernel.org/all/20220412094923.0abe90955e5db486b7bca279@kernel.org/
The commit b39181f7c6907 ("ftrace: Add FTRACE_MCOUNT_MAX_OFFSET to avoid
adding weak function") was a workaround to this by checking the function
address before printing its name. If the address was too far from the
function given by the name then instead of printing the name it would
print: __ftrace_invalid_address___<invalid-offset>
The real issue is that these invalid addresses are listed in the ftrace
table look up which available_filter_functions is derived from. A place
holder must be listed in that file because set_ftrace_filter may take a
series of indexes into that file instead of names to be able to do O(1)
lookups to enable filtering (many tools use this method).
Even if kallsyms saved the size of the function, it does not remove the
need of having these place holders. The real solution is to not add a weak
function into the ftrace table in the first place.
To solve this, the sorttable.c code that sorts the mcount regions during
the build is modified to take a "nm -S vmlinux" input, sort it, and any
function listed in the mcount_loc section that is not within a boundary of
the function list given by nm is considered a weak function and is zeroed
out.
Note, this does not mean they will remain zero when booting as KASLR
will still shift those addresses. To handle this, the entries in the
mcount_loc section will be ignored if they are zero or match the
kaslr_offset() value.
Before:
~# grep __ftrace_invalid_address___ /sys/kernel/tracing/available_filter_functions | wc -l
551
After:
~# grep __ftrace_invalid_address___ /sys/kernel/tracing/available_filter_functions | wc -l
0
Cc: bpf <bpf@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Cc: Martin Kelly <martin.kelly@crowdstrike.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250218200022.883095980@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 40a25d59e85b3c8709ac2424d44f65610467871e ]
syzbot triggered the following splat in remove_waiter() via
FUTEX_CMP_REQUEUE_PI:
KASAN: null-ptr-deref in range [0x0000000000000a88-0x0000000000000a8f]
class_raw_spinlock_constructor
remove_waiter+0x159/0x1200 kernel/locking/rtmutex.c:1561
rt_mutex_start_proxy_lock+0x103/0x120
futex_requeue+0x10e4/0x20d0
__x64_sys_futex+0x34f/0x4d0
task_blocks_on_rt_mutex() does not arm the waiter upon deadlock detection,
leaving waiter->task nil, where 3bfdc63936dd ("rtmutex: Use waiter::task instead
of current in remove_waiter()") made this fatal.
Furthermore, rt_mutex_start_proxy_lock() should not be calling into remove_waiter()
upon a successfully grabbing the rtmutex. 1a1fb985f2e2 ("futex: Handle early deadlock
return correctly"), moved the remove_waiter() out of __rt_mutex_start_proxy_lock()
(where 'ret' was only ever 0 or < 0) into the wrapper. Tighten this check to
account for try_to_take_rt_mutex().
Fixes: 3bfdc63936dd ("rtmutex: Use waiter::task instead of current in remove_waiter()")
Reported-by: syzbot+78147abe6c524f183ee9@syzkaller.appspotmail.com
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/69f114ac.050a0220.ac8b.0003.GAE@google.com/
Link: https://patch.msgid.link/20260507112913.1019537-1-dave@stgolabs.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 894d1b3db41cf7e6ae0304429a1747b3c3f390bc ]
In preparation to nest mutex::wait_lock under rq::lock we need
to remove wakeups from under it.
Do this by utilizing wake_qs to defer the wakeup until after the
lock is dropped.
[Heavily changed after 55f036ca7e74 ("locking: WW mutex cleanup") and
08295b3b5bee ("locking: Implement an algorithm choice for Wound-Wait
mutexes")]
[jstultz: rebased to mainline, added extra wake_up_q & init
to avoid hangs, similar to Connor's rework of this patch]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Metin Kaya <metin.kaya@arm.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Metin Kaya <metin.kaya@arm.com>
Link: https://lore.kernel.org/r/20241009235352.1614323-2-jstultz@google.com
Stable-dep-of: 40a25d59e85b ("locking/rtmutex: Skip remove_waiter() when waiter is not enqueued")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit eb7024bfcc5f68ed11ed9dd4891a3073c15f04a8 upstream.
kprobe.multi programs run in atomic/RCU context and cannot sleep.
However, bpf_kprobe_multi_link_attach() did not validate whether the
program being attached had the sleepable flag set, allowing sleepable
helpers such as bpf_copy_from_user() to be invoked from a non-sleepable
context.
This causes a "sleeping function called from invalid context" splat:
BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:169
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1787, name: sudo
preempt_count: 1, expected: 0
RCU nest depth: 2, expected: 0
Fix this by rejecting sleepable programs early in
bpf_kprobe_multi_link_attach(), before any further processing.
Fixes: 0dcac2725406 ("bpf: Add multi kprobe link")
Signed-off-by: Varun R Mallya <varunrmallya@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260401191126.440683-1-varunrmallya@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 02e545c4297a26dbbc41df81b831e7f605bcd306 ]
A WARN fires when systemd's user manager writes "+cpu +memory +pids" to
its own subtree_control while a sched_ext scheduler is loaded:
WARNING: at kernel/sched/ext.c:3227 scx_cgroup_move_task+0xa8/0xb0
scx_cgroup_move_task+0xa8/0xb0
sched_move_task+0x134/0x290
cpu_cgroup_attach+0x39/0x70
cgroup_migrate_execute+0x37d/0x450
cgroup_update_dfl_csses+0x1e3/0x270
cgroup_subtree_control_write+0x3e7/0x440
scx_cgroup_can_attach() arms cgrp_moving_from only when a task's cpu
cgroup changes. It can still be NULL when scx_cgroup_move_task() runs,
through this sequence:
Step Result
--------------------------------- ----------------------------------
1. cpu enabled on cgroup G cpu css = A
2. cpu toggled off then on for G A killed, B created (same cgroup)
3. an exiting task keeps A alive migration skips it, A now stale
4. +memory migrates G stale A vs current B pulls cpu in
5. cpu attach runs for all tasks hits a live, cpu-unchanged task
6. scx_cgroup_move_task() on it cgrp_moving_from NULL -> WARN
The mismatch is that scx_cgroup_can_attach() keys on cgroup identity
while migration drives the move on css identity, so a NULL cgrp_moving_from
here is a legitimate css-only migration, not a missing prep.
The call is already gated on cgrp_moving_from, so just drop the warning.
ops.cgroup_prep_move() and ops.cgroup_move() stay paired.
Fixes: 819513666966 ("sched_ext: Add cgroup support")
Cc: stable@vger.kernel.org # v6.12+
Reported-by: Matt Fleming <mfleming@cloudflare.com>
Closes: https://lore.kernel.org/all/20260601124156.2205704-1-mfleming@cloudflare.com/
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 62c4d31d78294bd61cf3403626b789e854357177 upstream.
The recent ptrace fix closed a hole where someone could rely on task->mm
becoming NULL during do_exit() to bypass dumpability checks. This api
here leans on on the very same check and so inherits the fix.
But there is no good reason to let it succeed at all once the target has
entered do_exit(). PF_EXITING is set by exit_signals() at the very top
of do_exit(), before exit_mm() and exit_files() run. Once we observe it,
the task is committed to dying and exit_files() will release the fdtable
shortly.
Fixes: 8649c322f75c ("pid: Implement pidfd_getfd syscall")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260518-obgleich-petersilie-2d77ccccf9b9@brauner
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d486b4934a8e504376b85cdb3766f306d57aff5b upstream.
tmigr_handle_remote_cpu() skips timer_expire_remote() when cpu ==
smp_processor_id(), assuming the local softirq path already handled this
CPU's timers.
This assumption is wrong because jiffies can advance after the handling of
the CPU's global timers in run_timer_base(BASE_GLOBAL) and before
tmigr_handle_remote() evaluates the expiry times.
As a consequence a timer which expires after the CPU local timer wheel
advanced and becomes expired in the remote handling is ignored and the
callback is never invoked and removed from the timer wheel.
What's worse is that fetch_next_timer_interrupt_remote() keeps reporting it
as expired, and the event is re-queued with expires == now on each
iteration. The goto-again loop spins indefinitely.
Fix this by calling timer_expire_remote() unconditionally. That's minimal
overhead for the common case as __run_timer_base() returns immediately if
there is nothing to expire in the local wheel.
[ tglx: Amend change log and add a comment ]
Fixes: 7ee988770326 ("timers: Implement the hierarchical pull model")
Reported-by: Alon Kariv <alonka@amazon.com>
Signed-off-by: Amit Matityahu <amitmat@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260603170139.33628-1-amitmat@amazon.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 85e0f27dd1396307913ffc5745b0c05137e9beac upstream.
Fix to point the error offset correctly for eprobe argument error.
In the cleanup commit 1b8b0cd754cd ("tracing/probes: Move event parameter
fetching code to common parser"), due to incorrect backward compatibility
aimed at conforming to the test specifications, the error location was set
to 0 when a non-existent formal parameter was specified for Eprobe.
However, this should be corrected in both the test and the implementation
to point correct error position.
Link: https://lore.kernel.org/all/177967567399.209006.1451571244515632097.stgit@devnote2/
Fixes: 1b8b0cd754cd ("tracing/probes: Move event parameter fetching code to common parser")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9bfaa86b405381326c971984fd6da184c289713f ]
In debug_dma_sync_sg_for_device(), when iterating over a scatterlist,
the debug entry population mistakenly uses the head of the scatterlist
'sg' to fetch the physical address via sg_phys(), instead of using the
current iterator variable 's'.
This causes dma-debug to track the physical address of the very first
scatterlist entry for all subsequent entries in the list.
Fix this by passing the correct loop iterator 's' to sg_phys()
Fixes: 9d4f645a1fd49ee ("dma-debug: store a phys_addr_t in struct dma_debug_entry")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260603123708.1665-1-lirongqing@baidu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9f0ec4b16f2b41d663f688a8012e9e52b2657eba ]
The IMA log is currently copied to the new kernel during kexec 'load' using
ima_dump_measurement_list(). However, the IMA measurement list copied at
kexec 'load' may result in loss of IMA measurements records that only
occurred after the kexec 'load'. Move the IMA measurement list log copy
from kexec 'load' to 'execute'
Make the kexec_segment_size variable a local static variable within the
file, so it can be accessed during both kexec 'load' and 'execute'.
Define kexec_post_load() as a wrapper for calling ima_kexec_post_load() and
machine_kexec_post_load(). Replace the existing direct call to
machine_kexec_post_load() with kexec_post_load().
When there is insufficient memory to copy all the measurement logs, copy as
much of the measurement list as possible.
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
(cherry picked from commit 9f0ec4b16f2b41d663f688a8012e9e52b2657eba)
Signed-off-by: Sherry Yang <sherry.yang@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9ee8888a80fe2bd20ce929ffbc1dedd57607a778 ]
Currently, the function kexec_calculate_store_digests() calculates and
stores the digest of the segment during the kexec_file_load syscall,
where the IMA segment is also allocated.
Later, the IMA segment will be updated with the measurement log at the
kexec execute stage when a kexec reboot is initiated. Therefore, the
digests should be updated for the IMA segment in the normal case. The
problem is that the content of memory segments carried over to the new
kernel during the kexec systemcall can be changed at kexec 'execute'
stage, but the size and the location of the memory segments cannot be
changed at kexec 'execute' stage.
To address this, skip the calculation and storage of the digest for the
IMA segment in kexec_calculate_store_digests() so that it is not added
to the purgatory_sha_regions.
With this change, the IMA segment is not included in the digest
calculation, storage, and verification.
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
[zohar@linux.ibm.com: Fixed Signed-off-by tag to match author's email ]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
(cherry picked from commit 9ee8888a80fe2bd20ce929ffbc1dedd57607a778)
Signed-off-by: Sherry Yang <sherry.yang@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ce4abda5e12622f33450159e76c8f56d28d7f03d ]
The validation check uses '>' instead of '>=' when comparing tv_usec
against USEC_PER_SEC, allowing the value 1000000 through. After
conversion to nanoseconds (*= 1000), this produces tv_nsec ==
NSEC_PER_SEC, violating the timespec invariant that tv_nsec must be
less than NSEC_PER_SEC.
Use '>=' to reject tv_usec values that are not in the valid range of
0 to 999999.
Fixes: 5e0fb1b57bea ("y2038: time: avoid timespec usage in settimeofday()")
Signed-off-by: Naveen Kumar Chaudhary <naveen.osdev@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/4rikk44zew3s6577dugmx4jyblz7o5c57niuap6ct3td5yfm6w@gh7pcumg7qor
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 90918794a4e2c3b440f8fcf3847765a8b1d81b25 ]
When a multi-threaded process receives a stop signal (e.g., SIGSTOP),
do_signal_stop() sets JOBCTL_STOP_PENDING and JOBCTL_STOP_CONSUME on all
threads and sets signal->group_stop_count to the number of threads. If
one of the threads concurrently calls execve(), de_thread() invokes
zap_other_threads() to kill all other threads. zap_other_threads()
aborts the pending group stop by resetting signal->group_stop_count to 0
and clears the JOBCTL_PENDING_MASK for all other threads. However, it
fails to clear the job control flags for the calling thread.
When execve() completes, the calling thread returns to user mode and
checks for pending signals. Seeing the stale JOBCTL_STOP_PENDING flag,
it calls do_signal_stop(), which invokes task_participate_group_stop().
Since JOBCTL_STOP_CONSUME is still set, it attempts to decrement the
already-zero signal->group_stop_count, triggering a warning:
sig->group_stop_count == 0
WARNING: CPU: 1 PID: 6475 at kernel/signal.c:373
task_participate_group_stop+0x215/0x2d0
Call Trace:
<TASK>
do_signal_stop+0x3be/0x5c0 kernel/signal.c:2619
get_signal+0xa8c/0x1330 kernel/signal.c:2884
arch_do_signal_or_restart+0xbc/0x840 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop+0x8c/0x4d0 kernel/entry/common.c:98
do_syscall_64+0x33e/0xf80 arch/x86/entry/syscall_64.c:100
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix this race condition by clearing the JOBCTL_PENDING_MASK for the
calling thread in zap_other_threads(), ensuring it does not retain any
stale job control state after the thread group is destroyed. This aligns
with other functions that tear down a thread group and abort group
stops, such as zap_process() and complete_signal(), which correctly
clear these flags for all threads including the current one.
Fixes: 39efa3ef3a37 ("signal: Use GROUP_STOP_PENDING to stop once for a single group stop")
Assisted-by: Gemini:gemini-3.1-pro-preview Gemini:gemini-3-flash-preview syzbot
Reported-by: syzbot+b109633ea805cac54a61@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b109633ea805cac54a61
Link: https://syzkaller.appspot.com/ai_job?id=d70208cc-862b-4fe3-bf02-3031e10cd0b3
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Link: https://patch.msgid.link/20260521142240.2973022-1-nogikh@google.com
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a494d3c8d5392bcdff83c2a593df0c160ff9f322 ]
On real hardware, panic and machine reboot may not flush hardware cache
to memory. This means the persistent ring buffer, which relies on a
coherent state of memory, may not have its events written to the buffer
and they may be lost. Moreover, there may be inconsistency with the
counters which are used for validation of the integrity of the
persistent ring buffer which may cause all data to be discarded.
To avoid this issue, stop recording of the ring buffer on panic and
flush the cache of the ring buffer's memory.
Fixes: e645535a954a ("tracing: Add option to use memmapped memory for trace boot instance")
Cc: stable@vger.kernel.org
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ian Rogers <irogers@google.com>
Link: https://patch.msgid.link/177751969602.2136606.12031934362587643488.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3b7a34aebbdf2a4b7295205bf0c654294283ec82 ]
Commit a3c3c6667("perf/core: Fix child_total_time_enabled accounting
bug at task exit") moves the event->state update to before
list_del_event(). This makes the event->state test in list_del_event()
always false; never calling perf_cgroup_event_disable().
As a result, cpuctx->cgrp won't be cleared properly; causing havoc.
Fixes: a3c3c6667("perf/core: Fix child_total_time_enabled accounting bug at task exit")
Signed-off-by: Yeoreum Yun <yeoreum.yun@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: David Wang <00107082@163.com>
Link: https://lore.kernel.org/all/aD2TspKH%2F7yvfYoO@e129823.arm.com/
Signed-off-by: Ian Klatzco <iklatzco@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit be5498cac2ddb112c5bd7433d5e834a1a2493427 ]
some of those used to be needed, some had been cargo-culted for
no reason...
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Stable-dep-of: ea5fe6a73ca5 ("net/handshake: Drain pending requests at net namespace exit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 576ec047d20b368b43c4d5db98c4f2e0f3c101ec ]
hist_field_name() returns "" everywhere except the fully-qualified
VAR_REF/EXPR case, where snprintf() truncation returns NULL early
and bypasses the bottom NULL->"" guard. Callers don't expect NULL:
strcat(expr, hist_field_name(field, 0)) at trace_events_hist.c:1758
and the strcmp() in the sort-key match loop at :4804 both deref it.
system and event_name are bounded by MAX_EVENT_NAME_LEN, but the
field name on a VAR_REF is kstrdup'd from a histogram variable
name parsed out of the trigger string and has no length cap, so
a long enough var name in a fully qualified reference can reach
the truncation path.
Keep the length check but leave field_name as "" on overflow.
Link: https://patch.msgid.link/20260508195747.25492-1-devnexen@gmail.com
Fixes: 5ec1d1e97de1 ("tracing: Rebuild full_name on each hist_field_name() call")
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 91840be8f710370607f949a627e070896faeddb8 ]
On PREEMPT_RT, non-HARD irq_work runs in per-CPU kthreads via
run_irq_workd(), so irq_work_sync() uses rcuwait() to wait for BUSY==0.
After irq_work_single() clears BUSY via atomic_cmpxchg(), it still
dereferences @work for irq_work_is_hard() and rcuwait_wake_up().
An irq_work_sync() caller on another CPU that enters after BUSY is cleared
can observe BUSY==0 immediately, return, and free the work before those
accesses complete — causing a use-after-free.
Fix this by wrapping run_irq_workd() in guard(rcu)() so that the entire
irq_work_single() execution is within an RCU read-side critical
section. Then add synchronize_rcu() in irq_work_sync() after
rcuwait_wait_event() to ensure the caller waits for the RCU grace period
before returning, preventing premature frees.
Fixes: 810979682ccc ("irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support.")
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260330073234.303732-1-jiayuan.chen@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 8f0f5c4fb9df0e19a341e0c6ed8dc4fda9124f03 upstream.
In paths where tracing_map_elt_alloc() failed to allocate objects,
the map->ops->elt_alloc() call was never successful. In this case,
map->ops->elt_free() should not be called.
Link: https://sashiko.dev/#/patchset/20260520223101.34710-1-rosenp%40gmail.com
Cc: stable@vger.kernel.org
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Rosen Penev <rosenp@gmail.com>
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 2734b629525a ("tracing: Add per-element variable support to tracing_map")
Link: https://patch.msgid.link/177933895460.108746.5396070821443932634.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a254b6d13b0edd6272926674d2afc46d46e496b7 upstream.
When tracing is active while reading the trace file, if the iterator
reading the buffer detects that the writer has passed the iterator head,
it will reset and set a "missed events" flag. This flag is passed to the
output processing to show the user that events were missed:
CPU:4 [LOST EVENTS]
The problem is that the flag is reset after it is checked in
ring_buffer_iter_dropped(). But the "trace" file iterates over all the CPU
ring buffers and it will check if they are dropped when figuring out which
buffer to print next. This prematurely clears the missed_events flag if
the CPU buffer with the missed events is not the one that is printed next.
On the iteration where the CPU buffer with the missed events is printed,
the check if it had missed events would return false and the output does
not show that events were missed.
Do not reset the missed_events flag when checking if there were missed
events, but instead clear it when moving the iterator head to the next
event.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260520220801.4fd09d13@fedora
Fixes: c9b7a4a72ff64 ("ring-buffer/tracing: Have iterator acknowledge dropped events")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4a39eda5fdd867fc39f3c039714dd432cee00268 ]
cpuset_can_attach() accumulates temporary SCHED_DEADLINE migration
state in the destination cpuset while walking the taskset.
If a later task_can_attach() or security_task_setscheduler() check
fails, cgroup_migrate_execute() treats cpuset as the failing subsystem
and does not call cpuset_cancel_attach() for it. The partially
accumulated state is then left behind and can be consumed by a later
attach, corrupting cpuset DL task accounting and pending DL bandwidth
accounting.
Reset the pending DL migration state from the common error exit when
ret is non-zero. Successful can_attach() keeps the state for
cpuset_attach() or cpuset_cancel_attach().
Fixes: 2ef269ef1ac0 ("cgroup/cpuset: Free DL BW in case can_attach() fails")
Cc: stable@vger.kernel.org # v6.10+
Signed-off-by: Guopeng Zhang <zhangguopeng@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Chen Ridong <chenridong@huaweicloud.com>
Reviewed-by: Waiman Long <longman@redhat.com>
[ omitted upstream context line `cs->dl_bw_cpu = cpu;` ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9a415cc53711f2238e0f0ca8a6bcc796c003b127 ]
In scx_root_enable_workfn(), put_task_struct(p) is called before scx_error()
dereferences p->comm and p->pid. If the iterator's reference is the last
drop, the task is freed synchronously and the deref becomes a UAF.
Move put_task_struct() past scx_error().
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/all/20260511214031.AF5E9C2BCB0@smtp.kernel.org/
Fixes: f0e1a0643a59 ("sched_ext: Implement BPF extensible scheduler class")
Cc: stable@vger.kernel.org # v6.12+
Signed-off-by: Tejun Heo <tj@kernel.org>
[ adapted fix to pre-refactor scx_ops_enable_workfn() with scx_task_iter_relock() instead of upstream scx_root_enable_workfn() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b905ee77d5f557a83a485b4146210f54f13365fc ]
In scx_set_task_state(), the default case was setting the
warn flag, but then returning immediately. This is problematic
because the only purpose of the warn flag is to trigger
WARN_ONCE, but the early return prevented it from ever firing,
leaving invalid task states undetected and untraced.
To fix this, a WARN_ONCE call is now added directly in the
default case.
The fix addresses two aspects:
- Guarantees the invalid task states are properly logged
and traced.
- Provides a distinct warning message
("sched_ext: Invalid task state") specifically for
states outside the defined scx_task_state enum values,
making it easier to distinguish from other transition
warnings.
This ensures proper detection and reporting of invalid states.
Signed-off-by: Samuele Mariotti <smariotti@disroot.org>
Signed-off-by: Paolo Valente <paolo.valente@unimore.it>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Stable-dep-of: 9a415cc53711 ("sched_ext: Avoid UAF in scx_root_enable_workfn() init failure path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ee6e44dfe6e50b4a5df853d933a96bdff5309e6e ]
IBM CI tool reported kernel warning[1] when running a CPU removal
operation through drmgr[2]. i.e "drmgr -c cpu -r -q 1"
WARNING: CPU: 0 PID: 0 at kernel/sched/cpudeadline.c:219 cpudl_set+0x58/0x170
NIP [c0000000002b6ed8] cpudl_set+0x58/0x170
LR [c0000000002b7cb8] dl_server_timer+0x168/0x2a0
Call Trace:
[c000000002c2f8c0] init_stack+0x78c0/0x8000 (unreliable)
[c0000000002b7cb8] dl_server_timer+0x168/0x2a0
[c00000000034df84] __hrtimer_run_queues+0x1a4/0x390
[c00000000034f624] hrtimer_interrupt+0x124/0x300
[c00000000002a230] timer_interrupt+0x140/0x320
Git bisects to: commit 4ae8d9aa9f9d ("sched/deadline: Fix dl_server getting stuck")
This happens since:
- dl_server hrtimer gets enqueued close to cpu offline, when
kthread_park enqueues a fair task.
- CPU goes offline and drmgr removes it from cpu_present_mask.
- hrtimer fires and warning is hit.
Fix it by stopping the dl_server before CPU is marked dead.
[1]: https://lore.kernel.org/all/8218e149-7718-4432-9312-f97297c352b9@linux.ibm.com/
[2]: https://github.com/ibm-power-utilities/powerpc-utils/tree/next/src/drmgr
[sshegde: wrote the changelog and tested it]
Fixes: 4ae8d9aa9f9d ("sched/deadline: Fix dl_server getting stuck")
Closes: https://lore.kernel.org/all/8218e149-7718-4432-9312-f97297c352b9@linux.ibm.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit a3a70caf7906708bf9bbc80018752a6b36543808 upstream.
John reported undesirable behaviour with the dl_server since commit:
cccb45d7c4295 ("sched/deadline: Less agressive dl_server handling").
When starving fair tasks on purpose (starting spinning FIFO tasks),
his fair workload, which often goes (briefly) idle, would delay fair
invocations for a second, running one invocation per second was both
unexpected and terribly slow.
The reason this happens is that when dl_se->server_pick_task() returns
NULL, indicating no runnable tasks, it would yield, pushing any later
jobs out a whole period (1 second).
Instead simply stop the server. This should restore behaviour in that
a later wakeup (which restarts the server) will be able to continue
running (subject to the CBS wakeup rules).
Notably, this does not re-introduce the behaviour cccb45d7c4295 set
out to solve, any start/stop cycle is naturally throttled by the timer
period (no active cancel).
Fixes: cccb45d7c4295 ("sched/deadline: Less agressive dl_server handling")
Reported-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: John Stultz <jstultz@google.com>
Closes: https://lore.kernel.org/regressions/04657838-46d1-432d-95e1-eb73b930b032@mailbox.org
Signed-off-by: Lukas Beckmann <lbckmnn@mailbox.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 4ae8d9aa9f9dc7137ea5e564d79c5aa5af1bc45c upstream.
John found it was easy to hit lockup warnings when running locktorture
on a 2 CPU VM, which he bisected down to: commit cccb45d7c429
("sched/deadline: Less agressive dl_server handling").
While debugging it seems there is a chance where we end up with the
dl_server dequeued, with dl_se->dl_server_active. This causes
dl_server_start() to return without enqueueing the dl_server, thus it
fails to run when RT tasks starve the cpu.
When this happens, dl_server_timer() catches the
'!dl_se->server_has_tasks(dl_se)' case, which then calls
replenish_dl_entity() and dl_server_stopped() and finally return
HRTIMER_NO_RESTART.
This ends in no new timer and also no enqueue, leaving the dl_server
'dead', allowing starvation.
What should have happened is for the bandwidth timer to start the
zero-laxity timer, which in turn would enqueue the dl_server and cause
dl_se->server_pick_task() to be called -- which will stop the
dl_server if no fair tasks are observed for a whole period.
IOW, it is totally irrelevant if there are fair tasks at the moment of
bandwidth refresh.
This removes all dl_se->server_has_tasks() users, so remove the whole
thing.
Fixes: cccb45d7c4295 ("sched/deadline: Less agressive dl_server handling")
Reported-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: John Stultz <jstultz@google.com>
[ adjust renamed variable in fair_server_has_tasks (which this patch
removes) ]
Signed-off-by: Lukas Beckmann <lbckmnn@mailbox.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 4717432dfd99bbd015b6782adca216c6f9340038 upstream.
Commit cccb45d7c429 ("sched/deadline: Less agressive dl_server handling")
introduces dl_server_stopped(). But it is obvious that dl_server_stopped()
should return true if dl_se->dl_server_active is 0.
Fixes: cccb45d7c429 ("sched/deadline: Less agressive dl_server handling")
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250809130419.1980742-1-chenhuacai@loongson.cn
Signed-off-by: Lukas Beckmann <lbckmnn@mailbox.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit cccb45d7c4295bbfeba616582d0249f2d21e6df5 upstream.
Chris reported that commit 5f6bd380c7bd ("sched/rt: Remove default
bandwidth control") caused a significant dip in his favourite
benchmark of the day. Simply disabling dl_server cured things.
His workload hammers the 0->1, 1->0 transitions, and the
dl_server_{start,stop}() overhead kills it -- fairly obviously a bad
idea in hind sight and all that.
Change things around to only disable the dl_server when there has not
been a fair task around for a whole period. Since the default period
is 1 second, this ensures the benchmark never trips this, overhead
gone.
Fixes: 557a6bfc662c ("sched/fair: Add trivial fair server")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/20250702121158.465086194@infradead.org
[ adjust context for renamed/removed variable names ]
Signed-off-by: Lukas Beckmann <lbckmnn@mailbox.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4fda9f0e7c950da4fe03cedeb2ac818edf5d03e9 ]
bpf_iter_scx_dsq_new() clears kit->dsq on failure and
bpf_iter_scx_dsq_{next,destroy}() guard against that. scx_dsq_move() doesn't -
it dereferences kit->dsq immediately, so a BPF program that calls
scx_bpf_dsq_move[_vtime]() after a failed iter_new oopses the kernel.
Return false if kit->dsq is NULL.
Fixes: 4c30f5ce4f7a ("sched_ext: Implement scx_bpf_dispatch[_vtime]_from_dsq()")
Cc: stable@vger.kernel.org # v6.12+
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
[ dropped the `struct scx_sched *sch` declaration and `sch = src_dsq->sched` line ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
