| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 845947aca6814f5723ed65e556eb5ee09493f05b ]
When register_fprobe_ips() fails, it tries to remove a list of
fprobe_hash_node from fprobe_ip_table, but it missed to remove
fprobe itself from fprobe_table. Moreover, when removing
the fprobe_hash_node which is added to rhltable once, it must
use kfree_rcu() after removing from rhltable.
To fix these issues, this reuses unregister_fprobe() internal
code to rollback the half-way registered fprobe.
Link: https://lore.kernel.org/all/177669366417.132053.17874946321744910456.stgit@mhiramat.tok.corp.google.com/
Fixes: 4346ba160409 ("fprobe: Rewrite fprobe on function-graph tracer")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1aec9e5c3e31ce1e28f914427fb7f90b91d310df ]
unregister_fprobe() can fail under memory pressure because of memory
allocation failure, but this maybe called from module unloading, and
usually there is no way to retry it. Moreover. trace_fprobe does not
check the return value.
To fix this problem, unregister fprobe and fprobe_hash_node even if
working memory allocation fails.
Anyway, if the last fprobe is removed, the filter will be freed.
Link: https://lore.kernel.org/all/177669365629.132053.8433032896213721288.stgit@mhiramat.tok.corp.google.com/
Fixes: 4346ba160409 ("fprobe: Rewrite fprobe on function-graph tracer")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Stable-dep-of: 845947aca681 ("tracing/fprobe: Remove fprobe from hash in failure path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2c67dc457bc67367dc8fcd8f471ce2d5bb5f7b2b ]
For now, fgraph is used for the fprobe, even if we need trace the entry
only. However, the performance of ftrace is better than fgraph, and we
can use ftrace_ops for this case.
Then performance of kprobe-multi increases from 54M to 69M. Before this
commit:
$ ./benchs/run_bench_trigger.sh kprobe-multi
kprobe-multi : 54.663 ± 0.493M/s
After this commit:
$ ./benchs/run_bench_trigger.sh kprobe-multi
kprobe-multi : 69.447 ± 0.143M/s
Mitigation is disable during the bench testing above.
Link: https://lore.kernel.org/all/20251015083238.2374294-2-dongml2@chinatelecom.cn/
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Stable-dep-of: 845947aca681 ("tracing/fprobe: Remove fprobe from hash in failure path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0de4c70d04a46a3c266547dd4275ce25f623796a ]
For now, all the kernel functions who are hooked by the fprobe will be
added to the hash table "fprobe_ip_table". The key of it is the function
address, and the value of it is "struct fprobe_hlist_node".
The budget of the hash table is FPROBE_IP_TABLE_SIZE, which is 256. And
this means the overhead of the hash table lookup will grow linearly if
the count of the functions in the fprobe more than 256. When we try to
hook all the kernel functions, the overhead will be huge.
Therefore, replace the hash table with rhltable to reduce the overhead.
Link: https://lore.kernel.org/all/20250819031825.55653-1-dongml2@chinatelecom.cn/
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Stable-dep-of: 845947aca681 ("tracing/fprobe: Remove fprobe from hash in failure path")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b2aa3b4d64e460ac606f386c24e7d8a873ce6f1a upstream.
There currently isn't a max limit an event probe can be. One could make an
event greater than PAGE_SIZE, which makes the event useless because if
it's bigger than the max event that can be recorded into the ring buffer,
then it will never be recorded.
A event probe should never need to be greater than 3K, so make that the
max size. As long as the max is less than the max that can be recorded
onto the ring buffer, it should be fine.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: 93ccae7a22274 ("tracing/kprobes: Support basic types on dynamic events")
Link: https://patch.msgid.link/20260428122302.706610ba@gandalf.local.home
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 92d5a606721f759ebebf448b3bd2b7a781d50bd0 upstream.
Since the cpu_buffer->reader_page is updated if there are unwound
pages. After that update, we should skip the page if it is the
original reader_page, because the original reader_page is already
checked.
Cc: stable@vger.kernel.org
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ian Rogers <irogers@google.com>
Link: https://patch.msgid.link/177701353063.2223789.1471163147644103306.stgit@mhiramat.tok.corp.google.com
Fixes: ca296d32ece3 ("tracing: ring_buffer: Rewind persistent ring buffer on reboot")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6ad51ada17ed80c9a5f205b4c01c424cac8b0d46 upstream.
Reject registration of a registered fprobe which is on the fprobe
hash table before initializing fprobe.
The add_fprobe_hash() checks this re-register fprobe, but since
fprobe_init() clears hlist_array field, it is too late to check it.
It has to check the re-registration before touncing fprobe.
Link: https://lore.kernel.org/all/177669364845.132053.18375367916162315835.stgit@mhiramat.tok.corp.google.com/
Fixes: 4346ba160409 ("fprobe: Rewrite fprobe on function-graph tracer")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4346be6577aaa04586167402ae87bbdbe32484a4 ]
parse_probe_arg() accepts quoted immediate strings and passes the body
after the opening quote to __parse_imm_string(). That helper currently
computes strlen(str) and immediately dereferences str[len - 1], which
underflows when the body is empty and not closed with double-quotation.
Reject empty non-closed immediate strings before checking for the closing quote.
Link: https://lore.kernel.org/all/20260401160315.88518-1-pengpeng@iscas.ac.cn/
Fixes: a42e3c4de964 ("tracing/probe: Add immediate string parameter support")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eb7024bfcc5f68ed11ed9dd4891a3073c15f04a8 ]
kprobe.multi programs run in atomic/RCU context and cannot sleep.
However, bpf_kprobe_multi_link_attach() did not validate whether the
program being attached had the sleepable flag set, allowing sleepable
helpers such as bpf_copy_from_user() to be invoked from a non-sleepable
context.
This causes a "sleeping function called from invalid context" splat:
BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:169
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1787, name: sudo
preempt_count: 1, expected: 0
RCU nest depth: 2, expected: 0
Fix this by rejecting sleepable programs early in
bpf_kprobe_multi_link_attach(), before any further processing.
Fixes: 0dcac2725406 ("bpf: Add multi kprobe link")
Signed-off-by: Varun R Mallya <varunrmallya@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Leon Hwang <leon.hwang@linux.dev>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260401191126.440683-1-varunrmallya@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 1f9885732248d22f788e4992c739a98c88ab8a55 upstream.
The following sequence may leads deadlock in cpu hotplug:
task1 task2 task3
----- ----- -----
mutex_lock(&interface_lock)
[CPU GOING OFFLINE]
cpus_write_lock();
osnoise_cpu_die();
kthread_stop(task3);
wait_for_completion();
osnoise_sleep();
mutex_lock(&interface_lock);
cpus_read_lock();
[DEAD LOCK]
Fix by swap the order of cpus_read_lock() and mutex_lock(&interface_lock).
Cc: stable@vger.kernel.org
Cc: <mathieu.desnoyers@efficios.com>
Cc: <zhang.run@zte.com.cn>
Cc: <yang.tao172@zte.com.cn>
Cc: <ran.xiaokai@zte.com.cn>
Fixes: bce29ac9ce0bb ("trace: Add osnoise tracer")
Link: https://patch.msgid.link/20260326141953414bVSj33dAYktqp9Oiyizq8@zte.com.cn
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Luo Haiyang <luo.haiyang@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 07183aac4a6828e474f00b37c9d795d0d99e18a7 ]
When the "copy_trace_marker" option is enabled for an instance, anything
written into /sys/kernel/tracing/trace_marker is also copied into that
instances buffer. When the option is set, that instance's trace_array
descriptor is added to the marker_copies link list. This list is protected
by RCU, as all iterations uses an RCU protected list traversal.
When the instance is deleted, all the flags that were enabled are cleared.
This also clears the copy_trace_marker flag and removes the trace_array
descriptor from the list.
The issue is after the flags are called, a direct call to
update_marker_trace() is performed to clear the flag. This function
returns true if the state of the flag changed and false otherwise. If it
returns true here, synchronize_rcu() is called to make sure all readers
see that its removed from the list.
But since the flag was already cleared, the state does not change and the
synchronization is never called, leaving a possible UAF bug.
Move the clearing of all flags below the updating of the copy_trace_marker
option which then makes sure the synchronization is performed.
Also use the flag for checking the state in update_marker_trace() instead
of looking at if the list is empty.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260318185512.1b6c7db4@gandalf.local.home
Fixes: 7b382efd5e8a ("tracing: Allow the top level trace_marker to write into another instances")
Reported-by: Sasha Levin <sashal@kernel.org>
Closes: https://lore.kernel.org/all/20260225133122.237275-1-sashal@kernel.org/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit edca33a56297d5741ccf867669debec116681987 upstream.
The system call trace events call trace_user_fault_read() to read the user
space part of some system calls. This is done by grabbing a per-cpu
buffer, disabling migration, enabling preemption, calling
copy_from_user(), disabling preemption, enabling migration and checking if
the task was preempted while preemption was enabled. If it was, the buffer
is considered corrupted and it tries again.
There's a safety mechanism that will fail out of this loop if it fails 100
times (with a warning). That warning message was triggered in some
pi_futex stress tests. Enabling the sched_switch trace event and
traceoff_on_warning, showed the problem:
pi_mutex_hammer-1375 [006] d..21 138.981648: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981651: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981656: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981659: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981664: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981667: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981671: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981675: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981679: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981682: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981687: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981690: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981695: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981698: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981703: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981706: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981711: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981714: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981719: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981722: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981727: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981730: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
pi_mutex_hammer-1375 [006] d..21 138.981735: sched_switch: prev_comm=pi_mutex_hammer prev_pid=1375 prev_prio=95 prev_state=R+ ==> next_comm=migration/6 next_pid=47 next_prio=0
migration/6-47 [006] d..2. 138.981738: sched_switch: prev_comm=migration/6 prev_pid=47 prev_prio=0 prev_state=S ==> next_comm=pi_mutex_hammer next_pid=1375 next_prio=95
What happened was the task 1375 was flagged to be migrated. When
preemption was enabled, the migration thread woke up to migrate that task,
but failed because migration for that task was disabled. This caused the
loop to fail to exit because the task scheduled out while trying to read
user space.
Every time the task enabled preemption the migration thread would schedule
in, try to migrate the task, fail and let the task continue. But because
the loop would only enable preemption with migration disabled, it would
always fail because each time it enabled preemption to read user space,
the migration thread would try to migrate it.
To solve this, when the loop fails to read user space without being
scheduled out, enabled and disable preemption with migration enabled. This
will allow the migration task to successfully migrate the task and the
next loop should succeed to read user space without being scheduled out.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260316130734.1858a998@gandalf.local.home
Fixes: 64cf7d058a005 ("tracing: Have trace_marker use per-cpu data to read user space")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f35dbac6942171dc4ce9398d1d216a59224590a9 upstream.
Since the validation loop in rb_meta_validate_events() updates the same
cpu_buffer->head_page->entries, the other subbuf entries are not updated.
Fix to use head_page to update the entries field, since it is the cursor
in this loop.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ian Rogers <irogers@google.com>
Fixes: 5f3b6e839f3c ("ring-buffer: Validate boot range memory events")
Link: https://patch.msgid.link/177391153882.193994.17158784065013676533.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b96d0c59cdbb2a22b2545f6f3d5c6276b05761dd ]
trace_graph_thresh_return() called handle_nosleeptime() and then delegated
to trace_graph_return(), which calls handle_nosleeptime() again. When
sleep-time accounting is disabled this double-adjusts calltime and can
produce bogus durations (including underflow).
Fix this by computing rettime once, applying handle_nosleeptime() only
once, using the adjusted calltime for threshold comparison, and writing
the return event directly via __trace_graph_return() when the threshold is
met.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260221113314048jE4VRwIyZEALiYByGK0My@zte.com.cn
Fixes: 3c9880f3ab52b ("ftrace: Use a running sleeptime instead of saving on shadow stack")
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d008ba8be8984760e36d7dcd4adbd5a41a645708 upstream.
Some of the sizing logic through tracer_alloc_buffers() uses int
internally, causing unexpected behavior if the user passes a value that
does not fit in an int (on my x86 machine, the result is uselessly tiny
buffers).
Fix by plumbing the parameter's real type (unsigned long) through to the
ring buffer allocation functions, which already use unsigned long.
It has always been possible to create larger ring buffers via the sysfs
interface: this only affects the cmdline parameter.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/bff42a4288aada08bdf74da3f5b67a2c28b761f8.1772852067.git.calvin@wbinvd.org
Fixes: 73c5162aa362 ("tracing: keep ring buffer to minimum size till used")
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3b1679e086bb869ca02722f6bd29b3573a6a0e7e upstream.
Multiple events can be enabled on the kernel command line via a comma
separator. But if the are specified one at a time, then only the last
event is enabled. This is because the event names are saved in a temporary
buffer, and each call by the init cmdline code will reset that buffer.
This also affects names in the boot config file, as it may call the
callback multiple times with an example of:
kernel.trace_event = ":mod:rproc_qcom_common", ":mod:qrtr", ":mod:qcom_aoss"
Change the cmdline callback function to append a comma and the next value
if the temporary buffer already has content.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260302-trace-events-allow-multiple-modules-v1-1-ce4436e37fb8@oss.qualcomm.com
Signed-off-by: Andrei-Alexandru Tachici <andrei-alexandru.tachici@oss.qualcomm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0a663b764dbdf135a126284f454c9f01f95a87d4 upstream.
When multiple syscall events are specified in the kernel command line
(e.g., trace_event=syscalls:sys_enter_openat,syscalls:sys_enter_close),
they are often not captured after boot, even though they appear enabled
in the tracing/set_event file.
The issue stems from how syscall events are initialized. Syscall
tracepoints require the global reference count (sys_tracepoint_refcount)
to transition from 0 to 1 to trigger the registration of the syscall
work (TIF_SYSCALL_TRACEPOINT) for tasks, including the init process (pid 1).
The current implementation of early_enable_events() with disable_first=true
used an interleaved sequence of "Disable A -> Enable A -> Disable B -> Enable B".
If multiple syscalls are enabled, the refcount never drops to zero,
preventing the 0->1 transition that triggers actual registration.
Fix this by splitting early_enable_events() into two distinct phases:
1. Disable all events specified in the buffer.
2. Enable all events specified in the buffer.
This ensures the refcount hits zero before re-enabling, allowing syscall
events to be properly activated during early boot.
The code is also refactored to use a helper function to avoid logic
duplication between the disable and enable phases.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260224023544.1250787-1-hehuiwen@kylinos.cn
Fixes: ce1039bd3a89 ("tracing: Fix enabling of syscall events on the command line")
Signed-off-by: Huiwen He <hehuiwen@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ad6fface76da42721c15e8fb281570aaa44a2c01 upstream.
We don't check if cookies are available on the kprobe_multi link
before accessing them in show_fdinfo callback, we should.
Cc: stable@vger.kernel.org
Fixes: da7e9c0a7fbc ("bpf: Add show_fdinfo for kprobe_multi")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260225111249.186230-1-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 457965c13f0837a289c9164b842d0860133f6274 ]
If trigger_data_alloc() fails and returns NULL, event_hist_trigger_parse()
jumps to the out_free error path. While kfree() safely handles a NULL
pointer, trigger_data_free() does not. This causes a NULL pointer
dereference in trigger_data_free() when evaluating
data->cmd_ops->set_filter.
Fix the problem by adding a NULL pointer check to trigger_data_free().
The problem was found by an experimental code review agent based on
gemini-3.1-pro while reviewing backports into v6.18.y.
Cc: Miaoqian Lin <linmq006@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://patch.msgid.link/20260305193339.2810953-1-linux@roeck-us.net
Fixes: 0550069cc25f ("tracing: Properly process error handling in event_hist_trigger_parse()")
Assisted-by: Gemini:gemini-3.1-pro
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit e39bb9e02b68942f8e9359d2a3efe7d37ae6be0e upstream.
When a process forks, the child process copies the parent's VMAs but the
user_mapped reference count is not incremented. As a result, when both the
parent and child processes exit, tracing_buffers_mmap_close() is called
twice. On the second call, user_mapped is already 0, causing the function to
return -ENODEV and triggering a WARN_ON.
Normally, this isn't an issue as the memory is mapped with VM_DONTCOPY set.
But this is only a hint, and the application can call
madvise(MADVISE_DOFORK) which resets the VM_DONTCOPY flag. When the
application does that, it can trigger this issue on fork.
Fix it by incrementing the user_mapped reference count without re-mapping
the pages in the VMA's open callback.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://patch.msgid.link/20260227025842.1085206-1-wangqing7171@gmail.com
Fixes: cf9f0f7c4c5bb ("tracing: Allow user-space mapping of the ring-buffer")
Reported-by: syzbot+3b5dd2030fe08afdf65d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3b5dd2030fe08afdf65d
Tested-by: syzbot+3b5dd2030fe08afdf65d@syzkaller.appspotmail.com
Signed-off-by: Qing Wang <wangqing7171@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9678e53179aa7e907360f5b5b275769008a69b80 ]
The event_hist_poll() function attempts to verify whether an event file is
being removed, but this check may not occur or could be unnecessarily
delayed. This happens because hist_poll_wakeup() is currently invoked only
from event_hist_trigger() when a hist command is triggered. If the event
file is being removed, no associated hist command will be triggered and a
waiter will be woken up only after an unrelated hist command is triggered.
Fix the issue by adding a call to hist_poll_wakeup() in
remove_event_file_dir() after setting the EVENT_FILE_FL_FREED flag. This
ensures that a task polling on a hist file is woken up and receives
EPOLLERR.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260219162737.314231-3-petr.pavlu@suse.com
Fixes: 1bd13edbbed6 ("tracing/hist: Add poll(POLLIN) support on hist file")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f0a0da1f907e8488826d91c465f7967a56a95aca ]
The event_hist_open() and event_hist_poll() functions currently retrieve
a trace_event_file pointer from a file struct by invoking
event_file_data(), which simply returns file->f_inode->i_private. The
functions then check if the pointer is NULL to determine whether the event
is still valid. This approach is flawed because i_private is assigned when
an eventfs inode is allocated and remains set throughout its lifetime.
Instead, the code should call event_file_file(), which checks for
EVENT_FILE_FL_FREED. Using the incorrect access function may result in the
code potentially opening a hist file for an event that is being removed or
becoming stuck while polling on this file.
Correct the access method to event_file_file() in both functions.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20260219162737.314231-2-petr.pavlu@suse.com
Fixes: 1bd13edbbed6 ("tracing/hist: Add poll(POLLIN) support on hist file")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f4ff9f646a4d373f9e895c2f0073305da288bc0a ]
The function graph tracer was modified to us the ftrace_ops of the
function tracer. This simplified the code as well as allowed more features
of the function graph tracer.
Not all architectures were converted over as it required the
implementation of HAVE_DYNAMIC_FTRACE_WITH_ARGS to implement. For those
architectures, it still did it the old way where the function graph tracer
handle was called by the function tracer trampoline. The handler then had
to check the hash to see if the registered handlers wanted to be called by
that function or not.
In order to speed up the function graph tracer that used ftrace_ops, if
only one callback was registered with function graph, it would call its
function directly via a static call.
Now, if the architecture does not support the use of using ftrace_ops and
still has the ftrace function trampoline calling the function graph
handler, then by doing a direct call it removes the check against the
handler's hash (list of functions it wants callbacks to), and it may call
that handler for functions that the handler did not request calls for.
On 32bit x86, which does not support the ftrace_ops use with function
graph tracer, it shows the issue:
~# trace-cmd start -p function -l schedule
~# trace-cmd show
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
2) * 11898.94 us | schedule();
3) # 1783.041 us | schedule();
1) | schedule() {
------------------------------------------
1) bash-8369 => kworker-7669
------------------------------------------
1) | schedule() {
------------------------------------------
1) kworker-7669 => bash-8369
------------------------------------------
1) + 97.004 us | }
1) | schedule() {
[..]
Now by starting the function tracer is another instance:
~# trace-cmd start -B foo -p function
This causes the function graph tracer to trace all functions (because the
function trace calls the function graph tracer for each on, and the
function graph trace is doing a direct call):
~# trace-cmd show
# tracer: function_graph
#
# CPU DURATION FUNCTION CALLS
# | | | | | | |
1) 1.669 us | } /* preempt_count_sub */
1) + 10.443 us | } /* _raw_spin_unlock_irqrestore */
1) | tick_program_event() {
1) | clockevents_program_event() {
1) 1.044 us | ktime_get();
1) 6.481 us | lapic_next_event();
1) + 10.114 us | }
1) + 11.790 us | }
1) ! 181.223 us | } /* hrtimer_interrupt */
1) ! 184.624 us | } /* __sysvec_apic_timer_interrupt */
1) | irq_exit_rcu() {
1) 0.678 us | preempt_count_sub();
When it should still only be tracing the schedule() function.
To fix this, add a macro FGRAPH_NO_DIRECT to be set to 0 when the
architecture does not support function graph use of ftrace_ops, and set to
1 otherwise. Then use this macro to know to allow function graph tracer to
call the handlers directly or not.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://patch.msgid.link/20260218104244.5f14dade@gandalf.local.home
Fixes: cc60ee813b503 ("function_graph: Use static_call and branch to optimize entry function")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 912b0ee248c529a4f45d1e7f568dc1adddbf2a4a ]
Check the event length before adding it for accessing next index in
rb_read_data_buffer(). Since this function is used for validating
possibly broken ring buffers, the length of the event could be broken.
In that case, the new event (e + len) can point a wrong address.
To avoid invalid memory access at boot, check whether the length of
each event is in the possible range before using it.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 5f3b6e839f3c ("ring-buffer: Validate boot range memory events")
Link: https://patch.msgid.link/177123421541.142205.9414352170164678966.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f1547779402c4cd67755c33616b7203baa88420b ]
There is a pointer head_page in rb_meta_validate_events() which is not
initialized at the beginning of a function. This pointer can be dereferenced
if there is a failure during reader page validation. In this case the control
is passed to "invalid" label where the pointer is dereferenced in a loop.
To fix the issue initialize orig_head and head_page before calling
rb_validate_buffer.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260213100130.2013839-1-d.dulov@aladdin.ru
Closes: https://lore.kernel.org/r/202406130130.JtTGRf7W-lkp@intel.com/
Fixes: 5f3b6e839f3c ("ring-buffer: Validate boot range memory events")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 53b2fae90ff01fede6520ca744ed5e8e366497ba ]
When registering a second fgraph callback, direct path is disabled and
array loop is used instead. When ftrace_graph_active falls back to one,
we try to re-enable direct mode via ftrace_graph_enable_direct(true, ...).
But ftrace_graph_enable_direct() incorrectly disables the static key
rather than enabling it. This leaves fgraph_do_direct permanently off
after first multi-callback transition, so direct fast mode is never
restored.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260213142932519cuWSpEXeS4-UnCvNXnK2P@zte.com.cn
Fixes: cc60ee813b503 ("function_graph: Use static_call and branch to optimize entry function")
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 804c4a2209bcf6ed4c45386f033e4d0f7c5bfda5 ]
Commit 32dc0042528d ("tracing: Reset last-boot buffers when reading
out all cpu buffers") resets the last_boot_info when user read out
all data via trace_pipe* files. But it is not reset when user
resets the buffer from other files. (e.g. write `trace` file)
Reset it when the corresponding ring buffer is reset too.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/177071302364.2293046.17895165659153977720.stgit@mhiramat.tok.corp.google.com
Fixes: 32dc0042528d ("tracing: Reset last-boot buffers when reading out all cpu buffers")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f844282deed7481cf2f813933229261e27306551 ]
Since the per-cpu buffer_size_kb file is writable for changing
per-cpu ring buffer size, the file should have the write access
permission.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/177071301597.2293046.11683339475076917920.stgit@mhiramat.tok.corp.google.com
Fixes: 21ccc9cd7211 ("tracing: Disable "other" permission bits in the tracefs files")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f743435f988cb0cf1f521035aee857851b25e06d ]
The get_sample() function in the hwlat tracer assumes the caller holds
hwlat_data.lock, but this is not actually happening. The result is
unprotected data access to hwlat_data, and in per-cpu mode can result in
false sharing which may show up as false positive latency events.
The specific case of false sharing observed was primarily between
hwlat_data.sample_width and hwlat_data.count. These are separated by
just 8B and are therefore likely to share a cache line. When one thread
modifies count, the cache line is in a modified state so when other
threads read sample_width in the main latency detection loop, they fetch
the modified cache line. On some systems, the fetch itself may be slow
enough to count as a latency event, which could set up a self
reinforcing cycle of latency events as each event increments count which
then causes more latency events, continuing the cycle.
The other result of the unprotected data access is that hwlat_data.count
can end up with duplicate or missed values, which was observed on some
systems in testing.
Convert hwlat_data.count to atomic64_t so it can be safely modified
without locking, and prevent false sharing by pulling sample_width into
a local variable.
One system this was tested on was a dual socket server with 32 CPUs on
each numa node. With settings of 1us threshold, 1000us width, and
2000us window, this change reduced the number of latency events from
500 per second down to approximately 1 event per minute. Some machines
tested did not exhibit measurable latency from the false sharing.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260210074810.6328-1-clord@mykolab.com
Signed-off-by: Colin Lord <clord@mykolab.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 276f3b6daf6024ae2742afd161e7418a5584a660 ]
Mahe reported issue with bpf_override_return helper not working when
executed from kprobe.multi bpf program on arm.
The problem is that on arm we use alternate storage for pt_regs object
that is passed to bpf_prog_run and if any register is changed (which
is the case of bpf_override_return) it's not propagated back to actual
pt_regs object.
Fixing this by introducing and calling ftrace_partial_regs_update function
to propagate the values of changed registers (ip and stack).
Reported-by: Mahe Tardy <mahe.tardy@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/bpf/20260112121157.854473-1-jolsa@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9df0e49c5b9b8d051529be9994e4f92f2d20be6f ]
The macros ENABLE_EVENT_STR and DISABLE_EVENT_STR were added to trace.h so
that more than one file can have access to them, but was never removed
from their original location. Remove the duplicates.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20260126130037.4ba201f9@gandalf.local.home
Fixes: d0bad49bb0a09 ("tracing: Add enable_hist/disable_hist triggers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0550069cc25f513ce1f109c88f7c1f01d63297db ]
Memory allocated with trigger_data_alloc() requires trigger_data_free()
for proper cleanup.
Replace kfree() with trigger_data_free() to fix this.
Found via static analysis and code review.
This isn't a real bug due to the current code basically being an open
coded version of trigger_data_free() without the synchronization. The
synchronization isn't needed as this is the error path of creation and
there's nothing to synchronize against yet. Replace the kfree() to be
consistent with the allocation.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20251211100058.2381268-1-linmq006@gmail.com
Fixes: e1f187d09e11 ("tracing: Have existing event_command.parse() implementations use helpers")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e8a1e7eaa19d0b757b06a2f913e3eeb4b1c002c6 ]
__sprint_symbol() might access an invalid pointer when
kallsyms_lookup_buildid() returns a symbol found by
ftrace_mod_address_lookup().
The ftrace lookup function must set both @modname and @modbuildid the same
way as module_address_lookup().
Link: https://lkml.kernel.org/r/20251128135920.217303-7-pmladek@suse.com
Fixes: 9294523e3768 ("module: add printk formats to add module build ID to stacktraces")
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkman <daniel@iogearbox.net>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Luis Chamberalin <mcgrof@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 802eef5afb1865bc5536a5302c068ba2215a1f72 ]
After commit 37cce22dbd51 ("bpf: verifier: Refactor helper access type tracking"),
the verifier started relying on the access type flags in helper
function prototypes to perform memory access optimizations.
Currently, several helper functions utilizing ARG_PTR_TO_MEM lack the
corresponding MEM_RDONLY or MEM_WRITE flags. This omission causes the
verifier to incorrectly assume that the buffer contents are unchanged
across the helper call. Consequently, the verifier may optimize away
subsequent reads based on this wrong assumption, leading to correctness
issues.
For bpf_get_stack_proto_raw_tp, the original MEM_RDONLY was incorrect
since the helper writes to the buffer. Change it to ARG_PTR_TO_UNINIT_MEM
which correctly indicates write access to potentially uninitialized memory.
Similar issues were recently addressed for specific helpers in commit
ac44dcc788b9 ("bpf: Fix verifier assumptions of bpf_d_path's output buffer")
and commit 2eb7648558a7 ("bpf: Specify access type of bpf_sysctl_get_name args").
Fix these prototypes by adding the correct memory access flags.
Fixes: 37cce22dbd51 ("bpf: verifier: Refactor helper access type tracking")
Co-developed-by: Shuran Liu <electronlsr@gmail.com>
Signed-off-by: Shuran Liu <electronlsr@gmail.com>
Co-developed-by: Peili Gao <gplhust955@gmail.com>
Signed-off-by: Peili Gao <gplhust955@gmail.com>
Co-developed-by: Haoran Ni <haoran.ni.cs@gmail.com>
Signed-off-by: Haoran Ni <haoran.ni.cs@gmail.com>
Signed-off-by: Zesen Liu <ftyghome@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260120-helper_proto-v3-1-27b0180b4e77@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 00f13e28a9c3acd40f0551cde7e9d2d1a41585bf ]
64-bit truncation to 32-bit can result in the sign of the truncated
value changing. The cmp_mod_entry is used in bsearch and so the
truncation could result in an invalid search order. This would only
happen were the addresses more than 2GB apart and so unlikely, but
let's fix the potentially broken compare anyway.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20260108002625.333331-1-irogers@google.com
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6435ffd6c7fcba330dfa91c58dc30aed2df3d0bf ]
When user resize all trace ring buffer through file 'buffer_size_kb',
then in ring_buffer_resize(), kernel allocates buffer pages for each
cpu in a loop.
If the kernel preemption model is PREEMPT_NONE and there are many cpus
and there are many buffer pages to be freed, it may not give up cpu
for a long time and finally cause a softlockup.
To avoid it, call cond_resched() after each cpu buffer free as Commit
f6bd2c92488c ("ring-buffer: Avoid softlockup in ring_buffer_resize()")
does.
Detailed call trace as follow:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 24-....: (14837 ticks this GP) idle=521c/1/0x4000000000000000 softirq=230597/230597 fqs=5329
rcu: (t=15004 jiffies g=26003221 q=211022 ncpus=96)
CPU: 24 UID: 0 PID: 11253 Comm: bash Kdump: loaded Tainted: G EL 6.18.2+ #278 NONE
pc : arch_local_irq_restore+0x8/0x20
arch_local_irq_restore+0x8/0x20 (P)
free_frozen_page_commit+0x28c/0x3b0
__free_frozen_pages+0x1c0/0x678
___free_pages+0xc0/0xe0
free_pages+0x3c/0x50
ring_buffer_resize.part.0+0x6a8/0x880
ring_buffer_resize+0x3c/0x58
__tracing_resize_ring_buffer.part.0+0x34/0xd8
tracing_resize_ring_buffer+0x8c/0xd0
tracing_entries_write+0x74/0xd8
vfs_write+0xcc/0x288
ksys_write+0x74/0x118
__arm64_sys_write+0x24/0x38
Cc: <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251228065008.2396573-1-mawupeng1@huawei.com
Signed-off-by: Wupeng Ma <mawupeng1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 033c55fe2e326bea022c3cc5178ecf3e0e459b82 ]
The fields of ftrace specific events (events used to save ftrace internal
events like function traces and trace_printk) are generated similarly to
how normal trace event fields are generated. That is, the fields are added
to a trace_events_fields array that saves the name, offset, size,
alignment and signness of the field. It is used to produce the output in
the format file in tracefs so that tooling knows how to parse the binary
data of the trace events.
The issue is that some of the ftrace event structures are packed. The
function graph exit event structures are one of them. The 64 bit calltime
and rettime fields end up 4 byte aligned, but the algorithm to show to
userspace shows them as 8 byte aligned.
The macros that create the ftrace events has one for embedded structure
fields. There's two macros for theses fields:
__field_desc() and __field_packed()
The difference of the latter macro is that it treats the field as packed.
Rename that field to __field_desc_packed() and create replace the
__field_packed() to be a normal field that is packed and have the calltime
and rettime use those.
This showed up on 32bit architectures for function graph time fields. It
had:
~# cat /sys/kernel/tracing/events/ftrace/funcgraph_exit/format
[..]
field:unsigned long func; offset:8; size:4; signed:0;
field:unsigned int depth; offset:12; size:4; signed:0;
field:unsigned int overrun; offset:16; size:4; signed:0;
field:unsigned long long calltime; offset:24; size:8; signed:0;
field:unsigned long long rettime; offset:32; size:8; signed:0;
Notice that overrun is at offset 16 with size 4, where in the structure
calltime is at offset 20 (16 + 4), but it shows the offset at 24. That's
because it used the alignment of unsigned long long when used as a
declaration and not as a member of a structure where it would be aligned
by word size (in this case 4).
By using the proper structure alignment, the format has it at the correct
offset:
~# cat /sys/kernel/tracing/events/ftrace/funcgraph_exit/format
[..]
field:unsigned long func; offset:8; size:4; signed:0;
field:unsigned int depth; offset:12; size:4; signed:0;
field:unsigned int overrun; offset:16; size:4; signed:0;
field:unsigned long long calltime; offset:20; size:8; signed:0;
field:unsigned long long rettime; offset:28; size:8; signed:0;
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reported-by: "jempty.liang" <imntjempty@163.com>
Link: https://patch.msgid.link/20260204113628.53faec78@gandalf.local.home
Fixes: 04ae87a52074e ("ftrace: Rework event_create_dir()")
Closes: https://lore.kernel.org/all/20260130015740.212343-1-imntjempty@163.com/
Closes: https://lore.kernel.org/all/20260202123342.2544795-1-imntjempty@163.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
[ Different variable types and some renames ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 90f9f5d64cae4e72defd96a2a22760173cb3c9ec upstream.
When creating a synthetic event based on an existing synthetic event that
had a stacktrace field and the new synthetic event used that field a
kernel crash occurred:
~# cd /sys/kernel/tracing
~# echo 's:stack unsigned long stack[];' > dynamic_events
~# echo 'hist:keys=prev_pid:s0=common_stacktrace if prev_state & 3' >> events/sched/sched_switch/trigger
~# echo 'hist:keys=next_pid:s1=$s0:onmatch(sched.sched_switch).trace(stack,$s1)' >> events/sched/sched_switch/trigger
The above creates a synthetic event that takes a stacktrace when a task
schedules out in a non-running state and passes that stacktrace to the
sched_switch event when that task schedules back in. It triggers the
"stack" synthetic event that has a stacktrace as its field (called "stack").
~# echo 's:syscall_stack s64 id; unsigned long stack[];' >> dynamic_events
~# echo 'hist:keys=common_pid:s2=stack' >> events/synthetic/stack/trigger
~# echo 'hist:keys=common_pid:s3=$s2,i0=id:onmatch(synthetic.stack).trace(syscall_stack,$i0,$s3)' >> events/raw_syscalls/sys_exit/trigger
The above makes another synthetic event called "syscall_stack" that
attaches the first synthetic event (stack) to the sys_exit trace event and
records the stacktrace from the stack event with the id of the system call
that is exiting.
When enabling this event (or using it in a historgram):
~# echo 1 > events/synthetic/syscall_stack/enable
Produces a kernel crash!
BUG: unable to handle page fault for address: 0000000000400010
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP PTI
CPU: 6 UID: 0 PID: 1257 Comm: bash Not tainted 6.16.3+deb14-amd64 #1 PREEMPT(lazy) Debian 6.16.3-1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:trace_event_raw_event_synth+0x90/0x380
Code: c5 00 00 00 00 85 d2 0f 84 e1 00 00 00 31 db eb 34 0f 1f 00 66 66 2e 0f 1f 84 00 00 00 00 00 66 66 2e 0f 1f 84 00 00 00 00 00 <49> 8b 04 24 48 83 c3 01 8d 0c c5 08 00 00 00 01 cd 41 3b 5d 40 0f
RSP: 0018:ffffd2670388f958 EFLAGS: 00010202
RAX: ffff8ba1065cc100 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000001 RSI: fffff266ffda7b90 RDI: ffffd2670388f9b0
RBP: 0000000000000010 R08: ffff8ba104e76000 R09: ffffd2670388fa50
R10: ffff8ba102dd42e0 R11: ffffffff9a908970 R12: 0000000000400010
R13: ffff8ba10a246400 R14: ffff8ba10a710220 R15: fffff266ffda7b90
FS: 00007fa3bc63f740(0000) GS:ffff8ba2e0f48000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000400010 CR3: 0000000107f9e003 CR4: 0000000000172ef0
Call Trace:
<TASK>
? __tracing_map_insert+0x208/0x3a0
action_trace+0x67/0x70
event_hist_trigger+0x633/0x6d0
event_triggers_call+0x82/0x130
trace_event_buffer_commit+0x19d/0x250
trace_event_raw_event_sys_exit+0x62/0xb0
syscall_exit_work+0x9d/0x140
do_syscall_64+0x20a/0x2f0
? trace_event_raw_event_sched_switch+0x12b/0x170
? save_fpregs_to_fpstate+0x3e/0x90
? _raw_spin_unlock+0xe/0x30
? finish_task_switch.isra.0+0x97/0x2c0
? __rseq_handle_notify_resume+0xad/0x4c0
? __schedule+0x4b8/0xd00
? restore_fpregs_from_fpstate+0x3c/0x90
? switch_fpu_return+0x5b/0xe0
? do_syscall_64+0x1ef/0x2f0
? do_fault+0x2e9/0x540
? __handle_mm_fault+0x7d1/0xf70
? count_memcg_events+0x167/0x1d0
? handle_mm_fault+0x1d7/0x2e0
? do_user_addr_fault+0x2c3/0x7f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The reason is that the stacktrace field is not labeled as such, and is
treated as a normal field and not as a dynamic event that it is.
In trace_event_raw_event_synth() the event is field is still treated as a
dynamic array, but the retrieval of the data is considered a normal field,
and the reference is just the meta data:
// Meta data is retrieved instead of a dynamic array
str_val = (char *)(long)var_ref_vals[val_idx];
// Then when it tries to process it:
len = *((unsigned long *)str_val) + 1;
It triggers a kernel page fault.
To fix this, first when defining the fields of the first synthetic event,
set the filter type to FILTER_STACKTRACE. This is used later by the second
synthetic event to know that this field is a stacktrace. When creating
the field of the new synthetic event, have it use this FILTER_STACKTRACE
to know to create a stacktrace field to copy the stacktrace into.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://patch.msgid.link/20260122194824.6905a38e@gandalf.local.home
Fixes: 00cf3d672a9d ("tracing: Allow synthetic events to pass around stacktraces")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit be55257fab181b93af38f8c4b1b3cb453a78d742 upstream.
The pg_remaining calculation in ftrace_process_locs() assumes that
ENTRIES_PER_PAGE multiplied by 2^order equals the actual capacity of the
allocated page group. However, ENTRIES_PER_PAGE is PAGE_SIZE / ENTRY_SIZE
(integer division). When PAGE_SIZE is not a multiple of ENTRY_SIZE (e.g.
4096 / 24 = 170 with remainder 16), high-order allocations (like 256 pages)
have significantly more capacity than 256 * 170. This leads to pg_remaining
being underestimated, which in turn makes skip (derived from skipped -
pg_remaining) larger than expected, causing the WARN(skip != remaining)
to trigger.
Extra allocated pages for ftrace: 2 with 654 skipped
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:7295 ftrace_process_locs+0x5bf/0x5e0
A similar problem in ftrace_allocate_records() can result in allocating
too many pages. This can trigger the second warning in
ftrace_process_locs().
Extra allocated pages for ftrace
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:7276 ftrace_process_locs+0x548/0x580
Use the actual capacity of a page group to determine the number of pages
to allocate. Have ftrace_allocate_pages() return the number of allocated
pages to avoid having to calculate it. Use the actual page group capacity
when validating the number of unused pages due to skipped entries.
Drop the definition of ENTRIES_PER_PAGE since it is no longer used.
Cc: stable@vger.kernel.org
Fixes: 4a3efc6baff93 ("ftrace: Update the mcount_loc check of skipped entries")
Link: https://patch.msgid.link/20260113152243.3557219-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 1e2ed4bfd50ace3c4272cfab7e9aa90956fb7ae0 ]
The ftrace_dump_on_oops string is not used outside of trace.c so
make it static to avoid the export warning from sparse:
kernel/trace/trace.c:141:6: warning: symbol 'ftrace_dump_on_oops' was not declared. Should it be static?
Fixes: dd293df6395a2 ("tracing: Move trace sysctls into trace.c")
Link: https://patch.msgid.link/20260106231054.84270-1-ben.dooks@codethink.co.uk
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 5f1ef0dfcb5b7f4a91a9b0e0ba533efd9f7e2cdb upstream.
A bug was reported about an infinite recursion caused by tracing the rcu
events with the kernel stack trace trigger enabled. The stack trace code
called back into RCU which then called the stack trace again.
Expand the ftrace recursion protection to add a set of bits to protect
events from recursion. Each bit represents the context that the event is
in (normal, softirq, interrupt and NMI).
Have the stack trace code use the interrupt context to protect against
recursion.
Note, the bug showed an issue in both the RCU code as well as the tracing
stacktrace code. This only handles the tracing stack trace side of the
bug. The RCU fix will be handled separately.
Link: https://lore.kernel.org/all/20260102122807.7025fc87@gandalf.local.home/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Link: https://patch.msgid.link/20260105203141.515cd49f@gandalf.local.home
Reported-by: Yao Kai <yaokai34@huawei.com>
Tested-by: Yao Kai <yaokai34@huawei.com>
Fixes: 5f5fa7ea89dc ("rcu: Don't use negative nesting depth in __rcu_read_unlock()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1650a1b6cb1ae6cb99bb4fce21b30ebdf9fc238e upstream.
When registering ftrace_graph, check if ftrace_pids_enabled is active.
If enabled, assign entryfunc to fgraph_pid_func to ensure filtering
is performed before executing the saved original entry function.
Cc: stable@vger.kernel.org
Cc: <wang.yaxin@zte.com.cn>
Cc: <mhiramat@kernel.org>
Cc: <mark.rutland@arm.com>
Cc: <mathieu.desnoyers@efficios.com>
Cc: <zhang.run@zte.com.cn>
Cc: <yang.yang29@zte.com.cn>
Link: https://patch.msgid.link/20251126173331679XGVF98NLhyLJRdtNkVZ6w@zte.com.cn
Fixes: df3ec5da6a1e7 ("function_graph: Add pid tracing back to function graph tracer")
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b5d6d3f73d0bac4a7e3a061372f6da166fc6ee5c upstream.
The ftrace_pids_enabled(op) check relies on op->private being properly
initialized, but fgraph_ops's underlying ftrace_ops->private was left
uninitialized. This caused ftrace_pids_enabled() to always return false,
effectively disabling PID filtering for function graph tracing.
Fix this by copying src_ops->private to dst_ops->private in
fgraph_init_ops(), ensuring PID filter state is correctly propagated.
Cc: stable@vger.kernel.org
Cc: <wang.yaxin@zte.com.cn>
Cc: <mhiramat@kernel.org>
Cc: <mark.rutland@arm.com>
Cc: <mathieu.desnoyers@efficios.com>
Cc: <zhang.run@zte.com.cn>
Cc: <yang.yang29@zte.com.cn>
Fixes: c132be2c4fcc1 ("function_graph: Have the instances use their own ftrace_ops for filtering")
Link: https://patch.msgid.link/20251126172926004y3hC8QyU4WFOjBkU_UxLC@zte.com.cn
Signed-off-by: Shengming Hu <hu.shengming@zte.com.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 47ef834209e5981f443240d8a8b45bf680df22aa upstream.
The commit 4d38328eb442d ("tracing: Fix synth event printk format for str
fields") replaced "%.*s" with "%s" but missed removing the number size of
the dynamic and static strings. The commit e1a453a57bc7 ("tracing: Do not
add length to print format in synthetic events") fixed the dynamic part
but did not fix the static part. That is, with the commands:
# echo 's:wake_lat char[] wakee; u64 delta;' >> /sys/kernel/tracing/dynamic_events
# echo 'hist:keys=pid:ts=common_timestamp.usecs if !(common_flags & 0x18)' > /sys/kernel/tracing/events/sched/sched_waking/trigger
# echo 'hist:keys=next_pid:delta=common_timestamp.usecs-$ts:onmatch(sched.sched_waking).trace(wake_lat,next_comm,$delta)' > /sys/kernel/tracing/events/sched/sched_switch/trigger
That caused the output of:
<idle>-0 [001] d..5. 193.428167: wake_lat: wakee=(efault)sshd-sessiondelta=155
sshd-session-879 [001] d..5. 193.811080: wake_lat: wakee=(efault)kworker/u34:5delta=58
<idle>-0 [002] d..5. 193.811198: wake_lat: wakee=(efault)bashdelta=91
The commit e1a453a57bc7 fixed the part where the synthetic event had
"char[] wakee". But if one were to replace that with a static size string:
# echo 's:wake_lat char[16] wakee; u64 delta;' >> /sys/kernel/tracing/dynamic_events
Where "wakee" is defined as "char[16]" and not "char[]" making it a static
size, the code triggered the "(efaul)" again.
Remove the added STR_VAR_LEN_MAX size as the string is still going to be
nul terminated.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Douglas Raillard <douglas.raillard@arm.com>
Link: https://patch.msgid.link/20251204151935.5fa30355@gandalf.local.home
Fixes: e1a453a57bc7 ("tracing: Do not add length to print format in synthetic events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ef7f38df890f5dcd2ae62f8dbde191d72f3bebae upstream.
Synthetic events currently do not have a function to register perf events.
This leads to calling the tracepoint register functions with a NULL
function pointer which triggers:
------------[ cut here ]------------
WARNING: kernel/tracepoint.c:175 at tracepoint_add_func+0x357/0x370, CPU#2: perf/2272
Modules linked in: kvm_intel kvm irqbypass
CPU: 2 UID: 0 PID: 2272 Comm: perf Not tainted 6.18.0-ftest-11964-ge022764176fc-dirty #323 PREEMPTLAZY
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:tracepoint_add_func+0x357/0x370
Code: 28 9c e8 4c 0b f5 ff eb 0f 4c 89 f7 48 c7 c6 80 4d 28 9c e8 ab 89 f4 ff 31 c0 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc <0f> 0b 49 c7 c6 ea ff ff ff e9 ee fe ff ff 0f 0b e9 f9 fe ff ff 0f
RSP: 0018:ffffabc0c44d3c40 EFLAGS: 00010246
RAX: 0000000000000001 RBX: ffff9380aa9e4060 RCX: 0000000000000000
RDX: 000000000000000a RSI: ffffffff9e1d4a98 RDI: ffff937fcf5fd6c8
RBP: 0000000000000001 R08: 0000000000000007 R09: ffff937fcf5fc780
R10: 0000000000000003 R11: ffffffff9c193910 R12: 000000000000000a
R13: ffffffff9e1e5888 R14: 0000000000000000 R15: ffffabc0c44d3c78
FS: 00007f6202f5f340(0000) GS:ffff93819f00f000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055d3162281a8 CR3: 0000000106a56003 CR4: 0000000000172ef0
Call Trace:
<TASK>
tracepoint_probe_register+0x5d/0x90
synth_event_reg+0x3c/0x60
perf_trace_event_init+0x204/0x340
perf_trace_init+0x85/0xd0
perf_tp_event_init+0x2e/0x50
perf_try_init_event+0x6f/0x230
? perf_event_alloc+0x4bb/0xdc0
perf_event_alloc+0x65a/0xdc0
__se_sys_perf_event_open+0x290/0x9f0
do_syscall_64+0x93/0x7b0
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
? trace_hardirqs_off+0x53/0xc0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Instead, have the code return -ENODEV, which doesn't warn and has perf
error out with:
# perf record -e synthetic:futex_wait
Error:
The sys_perf_event_open() syscall returned with 19 (No such device) for event (synthetic:futex_wait).
"dmesg | grep -i perf" may provide additional information.
Ideally perf should support synthetic events, but for now just fix the
warning. The support can come later.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://patch.msgid.link/20251216182440.147e4453@gandalf.local.home
Fixes: 4b147936fa509 ("tracing: Add support for 'synthetic' events")
Reported-by: Ian Rogers <irogers@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ac44dcc788b950606793e8f9690c30925f59df02 ]
Commit 37cce22dbd51 ("bpf: verifier: Refactor helper access type
tracking") started distinguishing read vs write accesses performed by
helpers.
The second argument of bpf_d_path() is a pointer to a buffer that the
helper fills with the resulting path. However, its prototype currently
uses ARG_PTR_TO_MEM without MEM_WRITE.
Before 37cce22dbd51, helper accesses were conservatively treated as
potential writes, so this mismatch did not cause issues. Since that
commit, the verifier may incorrectly assume that the buffer contents
are unchanged across the helper call and base its optimizations on this
wrong assumption. This can lead to misbehaviour in BPF programs that
read back the buffer, such as prefix comparisons on the returned path.
Fix this by marking the second argument of bpf_d_path() as
ARG_PTR_TO_MEM | MEM_WRITE so that the verifier correctly models the
write to the caller-provided buffer.
Fixes: 37cce22dbd51 ("bpf: verifier: Refactor helper access type tracking")
Co-developed-by: Zesen Liu <ftyg@live.com>
Signed-off-by: Zesen Liu <ftyg@live.com>
Co-developed-by: Peili Gao <gplhust955@gmail.com>
Signed-off-by: Peili Gao <gplhust955@gmail.com>
Co-developed-by: Haoran Ni <haoran.ni.cs@gmail.com>
Signed-off-by: Haoran Ni <haoran.ni.cs@gmail.com>
Signed-off-by: Shuran Liu <electronlsr@gmail.com>
Reviewed-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/r/20251206141210.3148-2-electronlsr@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer fix from Steven Rostedt:
- Do not allow mmapped ring buffer to be split
When the ring buffer VMA is split by a partial munmap or a MAP_FIXED,
the kernel calls vm_ops->close() on each portion. This causes the
ring_buffer_unmap() to be called multiple times. This causes
subsequent calls to return -ENODEV and triggers a warning.
There's no reason to allow user space to split up memory mapping of
the ring buffer. Have it return -EINVAL when that happens.
* tag 'trace-ringbuffer-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix WARN_ON in tracing_buffers_mmap_close for split VMAs
|
|
When a VMA is split (e.g., by partial munmap or MAP_FIXED), the kernel
calls vm_ops->close on each portion. For trace buffer mappings, this
results in ring_buffer_unmap() being called multiple times while
ring_buffer_map() was only called once.
This causes ring_buffer_unmap() to return -ENODEV on subsequent calls
because user_mapped is already 0, triggering a WARN_ON.
Trace buffer mappings cannot support partial mappings because the ring
buffer structure requires the complete buffer including the meta page.
Fix this by adding a may_split callback that returns -EINVAL to prevent
VMA splits entirely.
Cc: stable@vger.kernel.org
Fixes: cf9f0f7c4c5bb ("tracing: Allow user-space mapping of the ring-buffer")
Link: https://patch.msgid.link/20251119064019.25904-1-kartikey406@gmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a72c325b042aae6403c7
Tested-by: syzbot+a72c325b042aae6403c7@syzkaller.appspotmail.com
Reported-by: syzbot+a72c325b042aae6403c7@syzkaller.appspotmail.com
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix interaction between livepatch and BPF fexit programs (Song Liu)
With Steven and Masami acks.
- Fix stack ORC unwind from BPF kprobe_multi (Jiri Olsa)
With Steven and Masami acks.
- Fix out of bounds access in widen_imprecise_scalars() in the verifier
(Eduard Zingerman)
- Fix conflicts between MPTCP and BPF sockmap (Jiayuan Chen)
- Fix net_sched storage collision with BPF data_meta/data_end (Eric
Dumazet)
- Add _impl suffix to BPF kfuncs with implicit args to avoid breaking
them in bpf-next when KF_IMPLICIT_ARGS is added (Mykyta Yatsenko)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test widen_imprecise_scalars() with different stack depth
bpf: account for current allocated stack depth in widen_imprecise_scalars()
bpf: Add bpf_prog_run_data_pointers()
selftests/bpf: Add mptcp test with sockmap
mptcp: Fix proto fallback detection with BPF
mptcp: Disallow MPTCP subflows from sockmap
selftests/bpf: Add stacktrace ips test for raw_tp
selftests/bpf: Add stacktrace ips test for kprobe_multi/kretprobe_multi
x86/fgraph,bpf: Fix stack ORC unwind from kprobe_multi return probe
Revert "perf/x86: Always store regs->ip in perf_callchain_kernel()"
bpf: add _impl suffix for bpf_stream_vprintk() kfunc
bpf:add _impl suffix for bpf_task_work_schedule* kfuncs
selftests/bpf: Add tests for livepatch + bpf trampoline
ftrace: bpf: Fix IPMODIFY + DIRECT in modify_ftrace_direct()
ftrace: Fix BPF fexit with livepatch
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Check for reader catching up in ring_buffer_map_get_reader()
If the reader catches up to the writer in the memory mapped ring
buffer then calling rb_get_reader_page() will return NULL as there's
no pages left. But this isn't checked for before calling
rb_get_reader_page() and the return of NULL causes a warning.
If it is detected that the reader caught up to the writer, then
simply exit the routine
- Fix memory leak in histogram create_field_var()
The couple of the error paths in create_field_var() did not properly
clean up what was allocated. Make sure everything is freed properly
on error
- Fix help message of tools latency_collector
The help message incorrectly stated that "-t" was the same as
"--threads" whereas "--threads" is actually represented by "-e"
* tag 'trace-v6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/tools: Fix incorrcet short option in usage text for --threads
tracing: Fix memory leaks in create_field_var()
ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up
|
