summaryrefslogtreecommitdiff
path: root/kernel/trace
AgeCommit message (Collapse)Author
2023-04-20ring-buffer: Fix race while reader and writer are on the same pageZheng Yejian
commit 6455b6163d8c680366663cdb8c679514d55fc30c upstream. When user reads file 'trace_pipe', kernel keeps printing following logs that warn at "cpu_buffer->reader_page->read > rb_page_size(reader)" in rb_get_reader_page(). It just looks like there's an infinite loop in tracing_read_pipe(). This problem occurs several times on arm64 platform when testing v5.10 and below. Call trace: rb_get_reader_page+0x248/0x1300 rb_buffer_peek+0x34/0x160 ring_buffer_peek+0xbc/0x224 peek_next_entry+0x98/0xbc __find_next_entry+0xc4/0x1c0 trace_find_next_entry_inc+0x30/0x94 tracing_read_pipe+0x198/0x304 vfs_read+0xb4/0x1e0 ksys_read+0x74/0x100 __arm64_sys_read+0x24/0x30 el0_svc_common.constprop.0+0x7c/0x1bc do_el0_svc+0x2c/0x94 el0_svc+0x20/0x30 el0_sync_handler+0xb0/0xb4 el0_sync+0x160/0x180 Then I dump the vmcore and look into the problematic per_cpu ring_buffer, I found that tail_page/commit_page/reader_page are on the same page while reader_page->read is obviously abnormal: tail_page == commit_page == reader_page == { .write = 0x100d20, .read = 0x8f9f4805, // Far greater than 0xd20, obviously abnormal!!! .entries = 0x10004c, .real_end = 0x0, .page = { .time_stamp = 0x857257416af0, .commit = 0xd20, // This page hasn't been full filled. // .data[0...0xd20] seems normal. } } The root cause is most likely the race that reader and writer are on the same page while reader saw an event that not fully committed by writer. To fix this, add memory barriers to make sure the reader can see the content of what is committed. Since commit a0fcaaed0c46 ("ring-buffer: Fix race between reset page and reading page") has added the read barrier in rb_get_reader_page(), here we just need to add the write barrier. Link: https://lore.kernel.org/linux-trace-kernel/20230325021247.2923907-1-zhengyejian1@huawei.com Cc: stable@vger.kernel.org Fixes: 77ae365eca89 ("ring-buffer: make lockless") Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-22ftrace: Fix invalid address access in lookup_rec() when index is 0Chen Zhongjin
commit ee92fa443358f4fc0017c1d0d325c27b37802504 upstream. KASAN reported follow problem: BUG: KASAN: use-after-free in lookup_rec Read of size 8 at addr ffff000199270ff0 by task modprobe CPU: 2 Comm: modprobe Call trace: kasan_report __asan_load8 lookup_rec ftrace_location arch_check_ftrace_location check_kprobe_address_safe register_kprobe When checking pg->records[pg->index - 1].ip in lookup_rec(), it can get a pg which is newly added to ftrace_pages_start in ftrace_process_locs(). Before the first pg->index++, index is 0 and accessing pg->records[-1].ip will cause this problem. Don't check the ip when pg->index is 0. Link: https://lore.kernel.org/linux-trace-kernel/20230309080230.36064-1-chenzhongjin@huawei.com Cc: stable@vger.kernel.org Fixes: 9644302e3315 ("ftrace: Speed up search by skipping pages by address") Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-03-11tracing: Add NULL checks for buffer in ring_buffer_free_read_page()Jia-Ju Bai
[ Upstream commit 3e4272b9954094907f16861199728f14002fcaf6 ] In a previous commit 7433632c9ff6, buffer, buffer->buffers and buffer->buffers[cpu] in ring_buffer_wake_waiters() can be NULL, and thus the related checks are added. However, in the same call stack, these variables are also used in ring_buffer_free_read_page(): tracing_buffers_release() ring_buffer_wake_waiters(iter->array_buffer->buffer) cpu_buffer = buffer->buffers[cpu] -> Add checks by previous commit ring_buffer_free_read_page(iter->array_buffer->buffer) cpu_buffer = buffer->buffers[cpu] -> No check Thus, to avod possible null-pointer derefernces, the related checks should be added. These results are reported by a static tool designed by myself. Link: https://lkml.kernel.org/r/20230113125501.760324-1-baijiaju1990@gmail.com Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-06tracing: Make sure trace_printk() can output as soon as it can be usedSteven Rostedt (Google)
commit 3bb06eb6e9acf7c4a3e1b5bc87aed398ff8e2253 upstream. Currently trace_printk() can be used as soon as early_trace_init() is called from start_kernel(). But if a crash happens, and "ftrace_dump_on_oops" is set on the kernel command line, all you get will be: [ 0.456075] <idle>-0 0dN.2. 347519us : Unknown type 6 [ 0.456075] <idle>-0 0dN.2. 353141us : Unknown type 6 [ 0.456075] <idle>-0 0dN.2. 358684us : Unknown type 6 This is because the trace_printk() event (type 6) hasn't been registered yet. That gets done via an early_initcall(), which may be early, but not early enough. Instead of registering the trace_printk() event (and other ftrace events, which are not trace events) via an early_initcall(), have them registered at the same time that trace_printk() can be used. This way, if there is a crash before early_initcall(), then the trace_printk()s will actually be useful. Link: https://lkml.kernel.org/r/20230104161412.019f6c55@gandalf.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Fixes: e725c731e3bb1 ("tracing: Split tracing initialization into two for early initialization") Reported-by: "Joel Fernandes (Google)" <joel@joelfernandes.org> Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18tracing: Fix infinite loop in tracing_read_pipe on overflowed print_trace_lineYang Jihong
commit c1ac03af6ed45d05786c219d102f37eb44880f28 upstream. print_trace_line may overflow seq_file buffer. If the event is not consumed, the while loop keeps peeking this event, causing a infinite loop. Link: https://lkml.kernel.org/r/20221129113009.182425-1-yangjihong1@huawei.com Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: stable@vger.kernel.org Fixes: 088b1e427dbba ("ftrace: pipe fixes") Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18blktrace: Fix output non-blktrace event when blk_classic option enabledYang Jihong
[ Upstream commit f596da3efaf4130ff61cd029558845808df9bf99 ] When the blk_classic option is enabled, non-blktrace events must be filtered out. Otherwise, events of other types are output in the blktrace classic format, which is unexpected. The problem can be triggered in the following ways: # echo 1 > /sys/kernel/debug/tracing/options/blk_classic # echo 1 > /sys/kernel/debug/tracing/events/enable # echo blk > /sys/kernel/debug/tracing/current_tracer # cat /sys/kernel/debug/tracing/trace_pipe Fixes: c71a89615411 ("blktrace: add ftrace plugin") Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Link: https://lore.kernel.org/r/20221122040410.85113-1-yangjihong1@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-25ring_buffer: Do not deactivate non-existant pagesDaniil Tatianin
commit 56f4ca0a79a9f1af98f26c54b9b89ba1f9bcc6bd upstream. rb_head_page_deactivate() expects cpu_buffer to contain a valid list of ->pages, so verify that the list is actually present before calling it. Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Link: https://lkml.kernel.org/r/20221114143129.3534443-1-d-tatianin@yandex-team.ru Cc: stable@vger.kernel.org Fixes: 77ae365eca895 ("ring-buffer: make lockless") Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25ftrace: Fix null pointer dereference in ftrace_add_mod()Xiu Jianfeng
commit 19ba6c8af9382c4c05dc6a0a79af3013b9a35cd0 upstream. The @ftrace_mod is allocated by kzalloc(), so both the members {prev,next} of @ftrace_mode->list are NULL, it's not a valid state to call list_del(). If kstrdup() for @ftrace_mod->{func|module} fails, it goes to @out_free tag and calls free_ftrace_mod() to destroy @ftrace_mod, then list_del() will write prev->next and next->prev, where null pointer dereference happens. BUG: kernel NULL pointer dereference, address: 0000000000000008 Oops: 0002 [#1] PREEMPT SMP NOPTI Call Trace: <TASK> ftrace_mod_callback+0x20d/0x220 ? do_filp_open+0xd9/0x140 ftrace_process_regex.isra.51+0xbf/0x130 ftrace_regex_write.isra.52.part.53+0x6e/0x90 vfs_write+0xee/0x3a0 ? __audit_filter_op+0xb1/0x100 ? auditd_test_task+0x38/0x50 ksys_write+0xa5/0xe0 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Kernel panic - not syncing: Fatal exception So call INIT_LIST_HEAD() to initialize the list member to fix this issue. Link: https://lkml.kernel.org/r/20221116015207.30858-1-xiujianfeng@huawei.com Cc: stable@vger.kernel.org Fixes: 673feb9d76ab ("ftrace: Add :mod: caching infrastructure to trace_array") Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25ftrace: Optimize the allocation for mcount entriesWang Wensheng
commit bcea02b096333dc74af987cb9685a4dbdd820840 upstream. If we can't allocate this size, try something smaller with half of the size. Its order should be decreased by one instead of divided by two. Link: https://lkml.kernel.org/r/20221109094434.84046-3-wangwensheng4@huawei.com Cc: <mhiramat@kernel.org> Cc: <mark.rutland@arm.com> Cc: stable@vger.kernel.org Fixes: a79008755497d ("ftrace: Allocate the mcount record pages as groups") Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-25ftrace: Fix the possible incorrect kernel messageWang Wensheng
commit 08948caebe93482db1adfd2154eba124f66d161d upstream. If the number of mcount entries is an integer multiple of ENTRIES_PER_PAGE, the page count showing on the console would be wrong. Link: https://lkml.kernel.org/r/20221109094434.84046-2-wangwensheng4@huawei.com Cc: <mhiramat@kernel.org> Cc: <mark.rutland@arm.com> Cc: stable@vger.kernel.org Fixes: 5821e1b74f0d0 ("function tracing: fix wrong pos computing when read buffer has been fulfilled") Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26ring-buffer: Fix race between reset page and reading pageSteven Rostedt (Google)
commit a0fcaaed0c46cf9399d3a2d6e0c87ddb3df0e044 upstream. The ring buffer is broken up into sub buffers (currently of page size). Each sub buffer has a pointer to its "tail" (the last event written to the sub buffer). When a new event is requested, the tail is locally incremented to cover the size of the new event. This is done in a way that there is no need for locking. If the tail goes past the end of the sub buffer, the process of moving to the next sub buffer takes place. After setting the current sub buffer to the next one, the previous one that had the tail go passed the end of the sub buffer needs to be reset back to the original tail location (before the new event was requested) and the rest of the sub buffer needs to be "padded". The race happens when a reader takes control of the sub buffer. As readers do a "swap" of sub buffers from the ring buffer to get exclusive access to the sub buffer, it replaces the "head" sub buffer with an empty sub buffer that goes back into the writable portion of the ring buffer. This swap can happen as soon as the writer moves to the next sub buffer and before it updates the last sub buffer with padding. Because the sub buffer can be released to the reader while the writer is still updating the padding, it is possible for the reader to see the event that goes past the end of the sub buffer. This can cause obvious issues. To fix this, add a few memory barriers so that the reader definitely sees the updates to the sub buffer, and also waits until the writer has put back the "tail" of the sub buffer back to the last event that was written on it. To be paranoid, it will only spin for 1 second, otherwise it will warn and shutdown the ring buffer code. 1 second should be enough as the writer does have preemption disabled. If the writer doesn't move within 1 second (with preemption disabled) something is horribly wrong. No interrupt should last 1 second! Link: https://lore.kernel.org/all/20220830120854.7545-1-jiazi.li@transsion.com/ Link: https://bugzilla.kernel.org/show_bug.cgi?id=216369 Link: https://lkml.kernel.org/r/20220929104909.0650a36c@gandalf.local.home Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: stable@vger.kernel.org Fixes: c7b0930857e22 ("ring-buffer: prevent adding write in discarded area") Reported-by: Jiazi.Li <jiazi.li@transsion.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26ring-buffer: Check pending waiters when doing wake ups as wellSteven Rostedt (Google)
commit ec0bbc5ec5664dcee344f79373852117dc672c86 upstream. The wake up waiters only checks the "wakeup_full" variable and not the "full_waiters_pending". The full_waiters_pending is set when a waiter is added to the wait queue. The wakeup_full is only set when an event is triggered, and it clears the full_waiters_pending to avoid multiple calls to irq_work_queue(). The irq_work callback really needs to check both wakeup_full as well as full_waiters_pending such that this code can be used to wake up waiters when a file is closed that represents the ring buffer and the waiters need to be woken up. Link: https://lkml.kernel.org/r/20220927231824.209460321@goodmis.org Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Fixes: 15693458c4bc0 ("tracing/ring-buffer: Move poll wake ups into ring buffer code") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26ring-buffer: Allow splice to read previous partially read pagesSteven Rostedt (Google)
commit fa8f4a89736b654125fb254b0db753ac68a5fced upstream. If a page is partially read, and then the splice system call is run against the ring buffer, it will always fail to read, no matter how much is in the ring buffer. That's because the code path for a partial read of the page does will fail if the "full" flag is set. The splice system call wants full pages, so if the read of the ring buffer is not yet full, it should return zero, and the splice will block. But if a previous read was done, where the beginning has been consumed, it should still be given to the splice caller if the rest of the page has been written to. This caused the splice command to never consume data in this scenario, and let the ring buffer just fill up and lose events. Link: https://lkml.kernel.org/r/20220927144317.46be6b80@gandalf.local.home Cc: stable@vger.kernel.org Fixes: 8789a9e7df6bf ("ring-buffer: read page interface") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26ftrace: Properly unset FTRACE_HASH_FL_MODZheng Yejian
commit 0ce0638edf5ec83343302b884fa208179580700a upstream. When executing following commands like what document said, but the log "#### all functions enabled ####" was not shown as expect: 1. Set a 'mod' filter: $ echo 'write*:mod:ext3' > /sys/kernel/tracing/set_ftrace_filter 2. Invert above filter: $ echo '!write*:mod:ext3' >> /sys/kernel/tracing/set_ftrace_filter 3. Read the file: $ cat /sys/kernel/tracing/set_ftrace_filter By some debugging, I found that flag FTRACE_HASH_FL_MOD was not unset after inversion like above step 2 and then result of ftrace_hash_empty() is incorrect. Link: https://lkml.kernel.org/r/20220926152008.2239274-1-zhengyejian1@huawei.com Cc: <mingo@redhat.com> Cc: stable@vger.kernel.org Fixes: 8c08f0d5c6fb ("ftrace: Have cached module filters be an active filter") Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-05ftrace: Fix NULL pointer dereference in is_ftrace_trampoline when ftrace is deadYang Jihong
commit c3b0f72e805f0801f05fa2aa52011c4bfc694c44 upstream. ftrace_startup does not remove ops from ftrace_ops_list when ftrace_startup_enable fails: register_ftrace_function ftrace_startup __register_ftrace_function ... add_ftrace_ops(&ftrace_ops_list, ops) ... ... ftrace_startup_enable // if ftrace failed to modify, ftrace_disabled is set to 1 ... return 0 // ops is in the ftrace_ops_list. When ftrace_disabled = 1, unregister_ftrace_function simply returns without doing anything: unregister_ftrace_function ftrace_shutdown if (unlikely(ftrace_disabled)) return -ENODEV; // return here, __unregister_ftrace_function is not executed, // as a result, ops is still in the ftrace_ops_list __unregister_ftrace_function ... If ops is dynamically allocated, it will be free later, in this case, is_ftrace_trampoline accesses NULL pointer: is_ftrace_trampoline ftrace_ops_trampoline do_for_each_ftrace_op(op, ftrace_ops_list) // OOPS! op may be NULL! Syzkaller reports as follows: [ 1203.506103] BUG: kernel NULL pointer dereference, address: 000000000000010b [ 1203.508039] #PF: supervisor read access in kernel mode [ 1203.508798] #PF: error_code(0x0000) - not-present page [ 1203.509558] PGD 800000011660b067 P4D 800000011660b067 PUD 130fb8067 PMD 0 [ 1203.510560] Oops: 0000 [#1] SMP KASAN PTI [ 1203.511189] CPU: 6 PID: 29532 Comm: syz-executor.2 Tainted: G B W 5.10.0 #8 [ 1203.512324] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 1203.513895] RIP: 0010:is_ftrace_trampoline+0x26/0xb0 [ 1203.514644] Code: ff eb d3 90 41 55 41 54 49 89 fc 55 53 e8 f2 00 fd ff 48 8b 1d 3b 35 5d 03 e8 e6 00 fd ff 48 8d bb 90 00 00 00 e8 2a 81 26 00 <48> 8b ab 90 00 00 00 48 85 ed 74 1d e8 c9 00 fd ff 48 8d bb 98 00 [ 1203.518838] RSP: 0018:ffffc900012cf960 EFLAGS: 00010246 [ 1203.520092] RAX: 0000000000000000 RBX: 000000000000007b RCX: ffffffff8a331866 [ 1203.521469] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000000010b [ 1203.522583] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff8df18b07 [ 1203.523550] R10: fffffbfff1be3160 R11: 0000000000000001 R12: 0000000000478399 [ 1203.524596] R13: 0000000000000000 R14: ffff888145088000 R15: 0000000000000008 [ 1203.525634] FS: 00007f429f5f4700(0000) GS:ffff8881daf00000(0000) knlGS:0000000000000000 [ 1203.526801] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1203.527626] CR2: 000000000000010b CR3: 0000000170e1e001 CR4: 00000000003706e0 [ 1203.528611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1203.529605] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Therefore, when ftrace_startup_enable fails, we need to rollback registration process and remove ops from ftrace_ops_list. Link: https://lkml.kernel.org/r/20220818032659.56209-1-yangjihong1@huawei.com Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-14tracing: Avoid adding tracer option before update_tracer_optionsMark-PK Tsai
[ Upstream commit ef9188bcc6ca1d8a2ad83e826b548e6820721061 ] To prepare for support asynchronous tracer_init_tracefs initcall, avoid calling create_trace_option_files before __update_tracer_options. Otherwise, create_trace_option_files will show warning because some tracers in trace_types list are already in tr->topts. For example, hwlat_tracer call register_tracer in late_initcall, and global_trace.dir is already created in tracing_init_dentry, hwlat_tracer will be put into tr->topts. Then if the __update_tracer_options is executed after hwlat_tracer registered, create_trace_option_files find that hwlat_tracer is already in tr->topts. Link: https://lkml.kernel.org/r/20220426122407.17042-2-mark-pk.tsai@mediatek.com Link: https://lore.kernel.org/lkml/20220322133339.GA32582@xsang-OptiPlex-9020/ Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14tracing: Fix sleeping function called from invalid context on RT kernelJun Miao
[ Upstream commit 12025abdc8539ed9d5014e2d647a3fd1bd3de5cd ] When setting bootparams="trace_event=initcall:initcall_start tp_printk=1" in the cmdline, the output_printk() was called, and the spin_lock_irqsave() was called in the atomic and irq disable interrupt context suitation. On the PREEMPT_RT kernel, these locks are replaced with sleepable rt-spinlock, so the stack calltrace will be triggered. Fix it by raw_spin_lock_irqsave when PREEMPT_RT and "trace_event=initcall:initcall_start tp_printk=1" enabled. BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 preempt_count: 2, expected: 0 RCU nest depth: 0, expected: 0 Preemption disabled at: [<ffffffff8992303e>] try_to_wake_up+0x7e/0xba0 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.1-rt17+ #19 34c5812404187a875f32bee7977f7367f9679ea7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x60/0x8c dump_stack+0x10/0x12 __might_resched.cold+0x11d/0x155 rt_spin_lock+0x40/0x70 trace_event_buffer_commit+0x2fa/0x4c0 ? map_vsyscall+0x93/0x93 trace_event_raw_event_initcall_start+0xbe/0x110 ? perf_trace_initcall_finish+0x210/0x210 ? probe_sched_wakeup+0x34/0x40 ? ttwu_do_wakeup+0xda/0x310 ? trace_hardirqs_on+0x35/0x170 ? map_vsyscall+0x93/0x93 do_one_initcall+0x217/0x3c0 ? trace_event_raw_event_initcall_level+0x170/0x170 ? push_cpu_stop+0x400/0x400 ? cblist_init_generic+0x241/0x290 kernel_init_freeable+0x1ac/0x347 ? _raw_spin_unlock_irq+0x65/0x80 ? rest_init+0xf0/0xf0 kernel_init+0x1e/0x150 ret_from_fork+0x22/0x30 </TASK> Link: https://lkml.kernel.org/r/20220419013910.894370-1-jun.miao@intel.com Signed-off-by: Jun Miao <jun.miao@intel.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-27tracing: Dump stacktrace trigger to the corresponding instanceDaniel Bristot de Oliveira
commit ce33c845b030c9cf768370c951bc699470b09fa7 upstream. The stacktrace event trigger is not dumping the stacktrace to the instance where it was enabled, but to the global "instance." Use the private_data, pointing to the trigger file, to figure out the corresponding trace instance, and use it in the trigger action, like snapshot_trigger does. Link: https://lkml.kernel.org/r/afbb0b4f18ba92c276865bc97204d438473f4ebc.1645396236.git.bristot@kernel.org Cc: stable@vger.kernel.org Fixes: ae63b31e4d0e2 ("tracing: Separate out trace events from global variables") Reviewed-by: Tom Zanussi <zanussi@kernel.org> Tested-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-27tracing: Have traceon and traceoff trigger honor the instanceSteven Rostedt (Google)
commit 302e9edd54985f584cfc180098f3554774126969 upstream. If a trigger is set on an event to disable or enable tracing within an instance, then tracing should be disabled or enabled in the instance and not at the top level, which is confusing to users. Link: https://lkml.kernel.org/r/20220223223837.14f94ec3@rorschach.local.home Cc: stable@vger.kernel.org Fixes: ae63b31e4d0e2 ("tracing: Separate out trace events from global variables") Tested-by: Daniel Bristot de Oliveira <bristot@kernel.org> Reviewed-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-16tracing: Ensure trace buffer is at least 4096 bytes largeSven Schnelle
[ Upstream commit 7acf3a127bb7c65ff39099afd78960e77b2ca5de ] Booting the kernel with 'trace_buf_size=1' give a warning at boot during the ftrace selftests: [ 0.892809] Running postponed tracer tests: [ 0.892893] Testing tracer function: [ 0.901899] Callback from call_rcu_tasks_trace() invoked. [ 0.983829] Callback from call_rcu_tasks_rude() invoked. [ 1.072003] .. bad ring buffer .. corrupted trace buffer .. [ 1.091944] Callback from call_rcu_tasks() invoked. [ 1.097695] PASSED [ 1.097701] Testing dynamic ftrace: .. filter failed count=0 ..FAILED! [ 1.353474] ------------[ cut here ]------------ [ 1.353478] WARNING: CPU: 0 PID: 1 at kernel/trace/trace.c:1951 run_tracer_selftest+0x13c/0x1b0 Therefore enforce a minimum of 4096 bytes to make the selftest pass. Link: https://lkml.kernel.org/r/20220214134456.1751749-1-svens@linux.ibm.com Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-23tracing: Fix tp_printk option related with tp_printk_stop_on_bootJaeSang Yoo
[ Upstream commit 3203ce39ac0b2a57a84382ec184c7d4a0bede175 ] The kernel parameter "tp_printk_stop_on_boot" starts with "tp_printk" which is the same as another kernel parameter "tp_printk". If "tp_printk" setup is called before the "tp_printk_stop_on_boot", it will override the latter and keep it from being set. This is similar to other kernel parameter issues, such as: Commit 745a600cf1a6 ("um: console: Ignore console= option") or init/do_mounts.c:45 (setup function of "ro" kernel param) Fix it by checking for a "_" right after the "tp_printk" and if that exists do not process the parameter. Link: https://lkml.kernel.org/r/20220208195421.969326-1-jsyoo5b@gmail.com Signed-off-by: JaeSang Yoo <jsyoo5b@gmail.com> [ Fixed up change log and added space after if condition ] Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-01-11tracing: Tag trace_percpu_buffer as a percpu pointerNaveen N. Rao
commit f28439db470cca8b6b082239314e9fd10bd39034 upstream. Tag trace_percpu_buffer as a percpu pointer to resolve warnings reported by sparse: /linux/kernel/trace/trace.c:3218:46: warning: incorrect type in initializer (different address spaces) /linux/kernel/trace/trace.c:3218:46: expected void const [noderef] __percpu *__vpp_verify /linux/kernel/trace/trace.c:3218:46: got struct trace_buffer_struct * /linux/kernel/trace/trace.c:3234:9: warning: incorrect type in initializer (different address spaces) /linux/kernel/trace/trace.c:3234:9: expected void const [noderef] __percpu *__vpp_verify /linux/kernel/trace/trace.c:3234:9: got int * Link: https://lkml.kernel.org/r/ebabd3f23101d89cb75671b68b6f819f5edc830b.1640255304.git.naveen.n.rao@linux.vnet.ibm.com Cc: stable@vger.kernel.org Reported-by: kernel test robot <lkp@intel.com> Fixes: 07d777fe8c398 ("tracing: Add percpu buffers for trace_printk()") Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-11tracing: Fix check for trace_percpu_buffer validity in get_trace_buf()Naveen N. Rao
commit 823e670f7ed616d0ce993075c8afe0217885f79d upstream. With the new osnoise tracer, we are seeing the below splat: Kernel attempted to read user page (c7d880000) - exploit attempt? (uid: 0) BUG: Unable to handle kernel data access on read at 0xc7d880000 Faulting instruction address: 0xc0000000002ffa10 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries ... NIP [c0000000002ffa10] __trace_array_vprintk.part.0+0x70/0x2f0 LR [c0000000002ff9fc] __trace_array_vprintk.part.0+0x5c/0x2f0 Call Trace: [c0000008bdd73b80] [c0000000001c49cc] put_prev_task_fair+0x3c/0x60 (unreliable) [c0000008bdd73be0] [c000000000301430] trace_array_printk_buf+0x70/0x90 [c0000008bdd73c00] [c0000000003178b0] trace_sched_switch_callback+0x250/0x290 [c0000008bdd73c90] [c000000000e70d60] __schedule+0x410/0x710 [c0000008bdd73d40] [c000000000e710c0] schedule+0x60/0x130 [c0000008bdd73d70] [c000000000030614] interrupt_exit_user_prepare_main+0x264/0x270 [c0000008bdd73de0] [c000000000030a70] syscall_exit_prepare+0x150/0x180 [c0000008bdd73e10] [c00000000000c174] system_call_vectored_common+0xf4/0x278 osnoise tracer on ppc64le is triggering osnoise_taint() for negative duration in get_int_safe_duration() called from trace_sched_switch_callback()->thread_exit(). The problem though is that the check for a valid trace_percpu_buffer is incorrect in get_trace_buf(). The check is being done after calculating the pointer for the current cpu, rather than on the main percpu pointer. Fix the check to be against trace_percpu_buffer. Link: https://lkml.kernel.org/r/a920e4272e0b0635cf20c444707cbce1b2c8973d.1640255304.git.naveen.n.rao@linux.vnet.ibm.com Cc: stable@vger.kernel.org Fixes: e2ace001176dc9 ("tracing: Choose static tp_printk buffer by explicit nesting count") Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22tracing: Fix a kmemleak false positive in tracing_mapChen Jun
[ Upstream commit f25667e5980a4333729cac3101e5de1bb851f71a ] Doing the command: echo 'hist:key=common_pid.execname,common_timestamp' > /sys/kernel/debug/tracing/events/xxx/trigger Triggers many kmemleak reports: unreferenced object 0xffff0000c7ea4980 (size 128): comm "bash", pid 338, jiffies 4294912626 (age 9339.324s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f3469921>] kmem_cache_alloc_trace+0x4c0/0x6f0 [<0000000054ca40c3>] hist_trigger_elt_data_alloc+0x140/0x178 [<00000000633bd154>] tracing_map_init+0x1f8/0x268 [<000000007e814ab9>] event_hist_trigger_func+0xca0/0x1ad0 [<00000000bf8520ed>] trigger_process_regex+0xd4/0x128 [<00000000f549355a>] event_trigger_write+0x7c/0x120 [<00000000b80f898d>] vfs_write+0xc4/0x380 [<00000000823e1055>] ksys_write+0x74/0xf8 [<000000008a9374aa>] __arm64_sys_write+0x24/0x30 [<0000000087124017>] do_el0_svc+0x88/0x1c0 [<00000000efd0dcd1>] el0_svc+0x1c/0x28 [<00000000dbfba9b3>] el0_sync_handler+0x88/0xc0 [<00000000e7399680>] el0_sync+0x148/0x180 unreferenced object 0xffff0000c7ea4980 (size 128): comm "bash", pid 338, jiffies 4294912626 (age 9339.324s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000f3469921>] kmem_cache_alloc_trace+0x4c0/0x6f0 [<0000000054ca40c3>] hist_trigger_elt_data_alloc+0x140/0x178 [<00000000633bd154>] tracing_map_init+0x1f8/0x268 [<000000007e814ab9>] event_hist_trigger_func+0xca0/0x1ad0 [<00000000bf8520ed>] trigger_process_regex+0xd4/0x128 [<00000000f549355a>] event_trigger_write+0x7c/0x120 [<00000000b80f898d>] vfs_write+0xc4/0x380 [<00000000823e1055>] ksys_write+0x74/0xf8 [<000000008a9374aa>] __arm64_sys_write+0x24/0x30 [<0000000087124017>] do_el0_svc+0x88/0x1c0 [<00000000efd0dcd1>] el0_svc+0x1c/0x28 [<00000000dbfba9b3>] el0_sync_handler+0x88/0xc0 [<00000000e7399680>] el0_sync+0x148/0x180 The reason is elts->pages[i] is alloced by get_zeroed_page. and kmemleak will not scan the area alloced by get_zeroed_page. The address stored in elts->pages will be regarded as leaked. That is, the elts->pages[i] will have pointers loaded onto it as well, and without telling kmemleak about it, those pointers will look like memory without a reference. To fix this, call kmemleak_alloc to tell kmemleak to scan elts->pages[i] Link: https://lkml.kernel.org/r/20211124140801.87121-1-chenjun102@huawei.com Signed-off-by: Chen Jun <chenjun102@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08tracing: Check pid filtering when creating eventsSteven Rostedt (VMware)
commit 6cb206508b621a9a0a2c35b60540e399225c8243 upstream. When pid filtering is activated in an instance, all of the events trace files for that instance has the PID_FILTER flag set. This determines whether or not pid filtering needs to be done on the event, otherwise the event is executed as normal. If pid filtering is enabled when an event is created (via a dynamic event or modules), its flag is not updated to reflect the current state, and the events are not filtered properly. Cc: stable@vger.kernel.org Fixes: 3fdaf80f4a836 ("tracing: Implement event pid filtering") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08tracing: Fix pid filtering when triggers are attachedSteven Rostedt (VMware)
commit a55f224ff5f238013de8762c4287117e47b86e22 upstream. If a event is filtered by pid and a trigger that requires processing of the event to happen is a attached to the event, the discard portion does not take the pid filtering into account, and the event will then be recorded when it should not have been. Cc: stable@vger.kernel.org Fixes: 3fdaf80f4a836 ("tracing: Implement event pid filtering") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26tracing: Resize tgid_map to pid_max, not PID_MAX_DEFAULTPaul Burton
commit 4030a6e6a6a4a42ff8c18414c9e0c93e24cc70b8 upstream. Currently tgid_map is sized at PID_MAX_DEFAULT entries, which means that on systems where pid_max is configured higher than PID_MAX_DEFAULT the ftrace record-tgid option doesn't work so well. Any tasks with PIDs higher than PID_MAX_DEFAULT are simply not recorded in tgid_map, and don't show up in the saved_tgids file. In particular since systemd v243 & above configure pid_max to its highest possible 1<<22 value by default on 64 bit systems this renders the record-tgids option of little use. Increase the size of tgid_map to the configured pid_max instead, allowing it to cover the full range of PIDs up to the maximum value of PID_MAX_LIMIT if the system is configured that way. On 64 bit systems with pid_max == PID_MAX_LIMIT this will increase the size of tgid_map from 256KiB to 16MiB. Whilst this 64x increase in memory overhead sounds significant 64 bit systems are presumably best placed to accommodate it, and since tgid_map is only allocated when the record-tgid option is actually used presumably the user would rather it spends sufficient memory to actually record the tgids they expect. The size of tgid_map could also increase for CONFIG_BASE_SMALL=y configurations, but these seem unlikely to be systems upon which people are both configuring a large pid_max and running ftrace with record-tgid anyway. Of note is that we only allocate tgid_map once, the first time that the record-tgid option is enabled. Therefore its size is only set once, to the value of pid_max at the time the record-tgid option is first enabled. If a user increases pid_max after that point, the saved_tgids file will not contain entries for any tasks with pids beyond the earlier value of pid_max. Link: https://lkml.kernel.org/r/20210701172407.889626-2-paulburton@google.com Fixes: d914ba37d714 ("tracing: Add support for recording tgid of tasks") Cc: Ingo Molnar <mingo@redhat.com> Cc: Joel Fernandes <joelaf@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Paul Burton <paulburton@google.com> [ Fixed comment coding style ] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26tracing/cfi: Fix cmp_entries_* functions signature mismatchKalesh Singh
[ Upstream commit 7ce1bb83a14019f8c396d57ec704d19478747716 ] If CONFIG_CFI_CLANG=y, attempting to read an event histogram will cause the kernel to panic due to failed CFI check. 1. echo 'hist:keys=common_pid' >> events/sched/sched_switch/trigger 2. cat events/sched/sched_switch/hist 3. kernel panics on attempting to read hist This happens because the sort() function expects a generic int (*)(const void *, const void *) pointer for the compare function. To prevent this CFI failure, change tracing map cmp_entries_* function signatures to match this. Also, fix the build error reported by the kernel test robot [1]. [1] https://lore.kernel.org/r/202110141140.zzi4dRh4-lkp@intel.com/ Link: https://lkml.kernel.org/r/20211014045217.3265162-1-kaleshsingh@google.com Signed-off-by: Kalesh Singh <kaleshsingh@google.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-10-27tracing: Have all levels of checks prevent recursionSteven Rostedt (VMware)
commit ed65df63a39a3f6ed04f7258de8b6789e5021c18 upstream. While writing an email explaining the "bit = 0" logic for a discussion on making ftrace_test_recursion_trylock() disable preemption, I discovered a path that makes the "not do the logic if bit is zero" unsafe. The recursion logic is done in hot paths like the function tracer. Thus, any code executed causes noticeable overhead. Thus, tricks are done to try to limit the amount of code executed. This included the recursion testing logic. Having recursion testing is important, as there are many paths that can end up in an infinite recursion cycle when tracing every function in the kernel. Thus protection is needed to prevent that from happening. Because it is OK to recurse due to different running context levels (e.g. an interrupt preempts a trace, and then a trace occurs in the interrupt handler), a set of bits are used to know which context one is in (normal, softirq, irq and NMI). If a recursion occurs in the same level, it is prevented*. Then there are infrastructure levels of recursion as well. When more than one callback is attached to the same function to trace, it calls a loop function to iterate over all the callbacks. Both the callbacks and the loop function have recursion protection. The callbacks use the "ftrace_test_recursion_trylock()" which has a "function" set of context bits to test, and the loop function calls the internal trace_test_and_set_recursion() directly, with an "internal" set of bits. If an architecture does not implement all the features supported by ftrace then the callbacks are never called directly, and the loop function is called instead, which will implement the features of ftrace. Since both the loop function and the callbacks do recursion protection, it was seemed unnecessary to do it in both locations. Thus, a trick was made to have the internal set of recursion bits at a more significant bit location than the function bits. Then, if any of the higher bits were set, the logic of the function bits could be skipped, as any new recursion would first have to go through the loop function. This is true for architectures that do not support all the ftrace features, because all functions being traced must first go through the loop function before going to the callbacks. But this is not true for architectures that support all the ftrace features. That's because the loop function could be called due to two callbacks attached to the same function, but then a recursion function inside the callback could be called that does not share any other callback, and it will be called directly. i.e. traced_function_1: [ more than one callback tracing it ] call loop_func loop_func: trace_recursion set internal bit call callback callback: trace_recursion [ skipped because internal bit is set, return 0 ] call traced_function_2 traced_function_2: [ only traced by above callback ] call callback callback: trace_recursion [ skipped because internal bit is set, return 0 ] call traced_function_2 [ wash, rinse, repeat, BOOM! out of shampoo! ] Thus, the "bit == 0 skip" trick is not safe, unless the loop function is call for all functions. Since we want to encourage architectures to implement all ftrace features, having them slow down due to this extra logic may encourage the maintainers to update to the latest ftrace features. And because this logic is only safe for them, remove it completely. [*] There is on layer of recursion that is allowed, and that is to allow for the transition between interrupt context (normal -> softirq -> irq -> NMI), because a trace may occur before the context update is visible to the trace recursion logic. Link: https://lore.kernel.org/all/609b565a-ed6e-a1da-f025-166691b5d994@linux.alibaba.com/ Link: https://lkml.kernel.org/r/20211018154412.09fcad3c@gandalf.local.home Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@hansenpartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Jisheng Zhang <jszhang@kernel.org> Cc: =?utf-8?b?546L6LSH?= <yun.wang@linux.alibaba.com> Cc: Guo Ren <guoren@kernel.org> Cc: stable@vger.kernel.org Fixes: edc15cafcbfa3 ("tracing: Avoid unnecessary multiple recursion checks") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-06blktrace: Fix uaf in blk_trace access after removing by sysfsZhihao Cheng
[ Upstream commit 5afedf670caf30a2b5a52da96eb7eac7dee6a9c9 ] There is an use-after-free problem triggered by following process: P1(sda) P2(sdb) echo 0 > /sys/block/sdb/trace/enable blk_trace_remove_queue synchronize_rcu blk_trace_free relay_close rcu_read_lock __blk_add_trace trace_note_tsk (Iterate running_trace_list) relay_close_buf relay_destroy_buf kfree(buf) trace_note(sdb's bt) relay_reserve buf->offset <- nullptr deference (use-after-free) !!! rcu_read_unlock [ 502.714379] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 502.715260] #PF: supervisor read access in kernel mode [ 502.715903] #PF: error_code(0x0000) - not-present page [ 502.716546] PGD 103984067 P4D 103984067 PUD 17592b067 PMD 0 [ 502.717252] Oops: 0000 [#1] SMP [ 502.720308] RIP: 0010:trace_note.isra.0+0x86/0x360 [ 502.732872] Call Trace: [ 502.733193] __blk_add_trace.cold+0x137/0x1a3 [ 502.733734] blk_add_trace_rq+0x7b/0xd0 [ 502.734207] blk_add_trace_rq_issue+0x54/0xa0 [ 502.734755] blk_mq_start_request+0xde/0x1b0 [ 502.735287] scsi_queue_rq+0x528/0x1140 ... [ 502.742704] sg_new_write.isra.0+0x16e/0x3e0 [ 502.747501] sg_ioctl+0x466/0x1100 Reproduce method: ioctl(/dev/sda, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sda, BLKTRACESTART) ioctl(/dev/sdb, BLKTRACESETUP, blk_user_trace_setup[buf_size=127]) ioctl(/dev/sdb, BLKTRACESTART) echo 0 > /sys/block/sdb/trace/enable & // Add delay(mdelay/msleep) before kernel enters blk_trace_free() ioctl$SG_IO(/dev/sda, SG_IO, ...) // Enters trace_note_tsk() after blk_trace_free() returned // Use mdelay in rcu region rather than msleep(which may schedule out) Remove blk_trace from running_list before calling blk_trace_free() by sysfs if blk_trace is at Blktrace_running state. Fixes: c71a896154119f ("blktrace: add ftrace plugin") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Link: https://lore.kernel.org/r/20210923134921.109194-1-chengzhihao1@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-28tracing: Fix bug in rb_per_cpu_empty() that might cause deadloop.Haoran Luo
commit 67f0d6d9883c13174669f88adac4f0ee656cc16a upstream. The "rb_per_cpu_empty()" misinterpret the condition (as not-empty) when "head_page" and "commit_page" of "struct ring_buffer_per_cpu" points to the same buffer page, whose "buffer_data_page" is empty and "read" field is non-zero. An error scenario could be constructed as followed (kernel perspective): 1. All pages in the buffer has been accessed by reader(s) so that all of them will have non-zero "read" field. 2. Read and clear all buffer pages so that "rb_num_of_entries()" will return 0 rendering there's no more data to read. It is also required that the "read_page", "commit_page" and "tail_page" points to the same page, while "head_page" is the next page of them. 3. Invoke "ring_buffer_lock_reserve()" with large enough "length" so that it shot pass the end of current tail buffer page. Now the "head_page", "commit_page" and "tail_page" points to the same page. 4. Discard current event with "ring_buffer_discard_commit()", so that "head_page", "commit_page" and "tail_page" points to a page whose buffer data page is now empty. When the error scenario has been constructed, "tracing_read_pipe" will be trapped inside a deadloop: "trace_empty()" returns 0 since "rb_per_cpu_empty()" returns 0 when it hits the CPU containing such constructed ring buffer. Then "trace_find_next_entry_inc()" always return NULL since "rb_num_of_entries()" reports there's no more entry to read. Finally "trace_seq_to_user()" returns "-EBUSY" spanking "tracing_read_pipe" back to the start of the "waitagain" loop. I've also written a proof-of-concept script to construct the scenario and trigger the bug automatically, you can use it to trace and validate my reasoning above: https://github.com/aegistudio/RingBufferDetonator.git Tests has been carried out on linux kernel 5.14-rc2 (2734d6c1b1a089fb593ef6a23d4b70903526fe0c), my fixed version of kernel (for testing whether my update fixes the bug) and some older kernels (for range of affected kernels). Test result is also attached to the proof-of-concept repository. Link: https://lore.kernel.org/linux-trace-devel/YPaNxsIlb2yjSi5Y@aegistudio/ Link: https://lore.kernel.org/linux-trace-devel/YPgrN85WL9VyrZ55@aegistudio Cc: stable@vger.kernel.org Fixes: bf41a158cacba ("ring-buffer: make reentrant") Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org> Signed-off-by: Haoran Luo <www@aegistudio.net> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20tracing: Do not reference char * as a string in histogramsSteven Rostedt (VMware)
commit 704adfb5a9978462cd861f170201ae2b5e3d3a80 upstream. The histogram logic was allowing events with char * pointers to be used as normal strings. But it was easy to crash the kernel with: # echo 'hist:keys=filename' > events/syscalls/sys_enter_openat/trigger And open some files, and boom! BUG: unable to handle page fault for address: 00007f2ced0c3280 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1173fa067 P4D 1173fa067 PUD 1171b6067 PMD 1171dd067 PTE 0 Oops: 0000 [#1] PREEMPT SMP CPU: 6 PID: 1810 Comm: cat Not tainted 5.13.0-rc5-test+ #61 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:strlen+0x0/0x20 Code: f6 82 80 2a 0b a9 20 74 11 0f b6 50 01 48 83 c0 01 f6 82 80 2a 0b a9 20 75 ef c3 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 <80> 3f 00 74 10 48 89 f8 48 83 c0 01 80 38 00 75 f7 48 29 f8 c3 RSP: 0018:ffffbdbf81567b50 EFLAGS: 00010246 RAX: 0000000000000003 RBX: ffff93815cdb3800 RCX: ffff9382401a22d0 RDX: 0000000000000100 RSI: 0000000000000000 RDI: 00007f2ced0c3280 RBP: 0000000000000100 R08: ffff9382409ff074 R09: ffffbdbf81567c98 R10: ffff9382409ff074 R11: 0000000000000000 R12: ffff9382409ff074 R13: 0000000000000001 R14: ffff93815a744f00 R15: 00007f2ced0c3280 FS: 00007f2ced0f8580(0000) GS:ffff93825a800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f2ced0c3280 CR3: 0000000107069005 CR4: 00000000001706e0 Call Trace: event_hist_trigger+0x463/0x5f0 ? find_held_lock+0x32/0x90 ? sched_clock_cpu+0xe/0xd0 ? lock_release+0x155/0x440 ? kernel_init_free_pages+0x6d/0x90 ? preempt_count_sub+0x9b/0xd0 ? kernel_init_free_pages+0x6d/0x90 ? get_page_from_freelist+0x12c4/0x1680 ? __rb_reserve_next+0xe5/0x460 ? ring_buffer_lock_reserve+0x12a/0x3f0 event_triggers_call+0x52/0xe0 ftrace_syscall_enter+0x264/0x2c0 syscall_trace_enter.constprop.0+0x1ee/0x210 do_syscall_64+0x1c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Where it triggered a fault on strlen(key) where key was the filename. The reason is that filename is a char * to user space, and the histogram code just blindly dereferenced it, with obvious bad results. I originally tried to use strncpy_from_user/kernel_nofault() but found that there's other places that its dereferenced and not worth the effort. Just do not allow "char *" to act like strings. Link: https://lkml.kernel.org/r/20210715000206.025df9d2@rorschach.local.home Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com> Cc: stable@vger.kernel.org Acked-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Tom Zanussi <zanussi@kernel.org> Fixes: 79e577cbce4c4 ("tracing: Support string type key properly") Fixes: 5967bd5c4239 ("tracing: Let filter_assign_type() detect FILTER_PTR_STRING") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20tracing: Simplify & fix saved_tgids logicPaul Burton
commit b81b3e959adb107cd5b36c7dc5ba1364bbd31eb2 upstream. The tgid_map array records a mapping from pid to tgid, where the index of an entry within the array is the pid & the value stored at that index is the tgid. The saved_tgids_next() function iterates over pointers into the tgid_map array & dereferences the pointers which results in the tgid, but then it passes that dereferenced value to trace_find_tgid() which treats it as a pid & does a further lookup within the tgid_map array. It seems likely that the intent here was to skip over entries in tgid_map for which the recorded tgid is zero, but instead we end up skipping over entries for which the thread group leader hasn't yet had its own tgid recorded in tgid_map. A minimal fix would be to remove the call to trace_find_tgid, turning: if (trace_find_tgid(*ptr)) into: if (*ptr) ..but it seems like this logic can be much simpler if we simply let seq_read() iterate over the whole tgid_map array & filter out empty entries by returning SEQ_SKIP from saved_tgids_show(). Here we take that approach, removing the incorrect logic here entirely. Link: https://lkml.kernel.org/r/20210630003406.4013668-1-paulburton@google.com Fixes: d914ba37d714 ("tracing: Add support for recording tgid of tasks") Cc: Ingo Molnar <mingo@redhat.com> Cc: Joel Fernandes <joelaf@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Paul Burton <paulburton@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-30tracing: Do no increment trace_clock_global() by oneSteven Rostedt (VMware)
commit 89529d8b8f8daf92d9979382b8d2eb39966846ea upstream. The trace_clock_global() tries to make sure the events between CPUs is somewhat in order. A global value is used and updated by the latest read of a clock. If one CPU is ahead by a little, and is read by another CPU, a lock is taken, and if the timestamp of the other CPU is behind, it will simply use the other CPUs timestamp. The lock is also only taken with a "trylock" due to tracing, and strange recursions can happen. The lock is not taken at all in NMI context. In the case where the lock is not able to be taken, the non synced timestamp is returned. But it will not be less than the saved global timestamp. The problem arises because when the time goes "backwards" the time returned is the saved timestamp plus 1. If the lock is not taken, and the plus one to the timestamp is returned, there's a small race that can cause the time to go backwards! CPU0 CPU1 ---- ---- trace_clock_global() { ts = clock() [ 1000 ] trylock(clock_lock) [ success ] global_ts = ts; [ 1000 ] <interrupted by NMI> trace_clock_global() { ts = clock() [ 999 ] if (ts < global_ts) ts = global_ts + 1 [ 1001 ] trylock(clock_lock) [ fail ] return ts [ 1001] } unlock(clock_lock); return ts; [ 1000 ] } trace_clock_global() { ts = clock() [ 1000 ] if (ts < global_ts) [ false 1000 == 1000 ] trylock(clock_lock) [ success ] global_ts = ts; [ 1000 ] unlock(clock_lock) return ts; [ 1000 ] } The above case shows to reads of trace_clock_global() on the same CPU, but the second read returns one less than the first read. That is, time when backwards, and this is not what is allowed by trace_clock_global(). This was triggered by heavy tracing and the ring buffer checker that tests for the clock going backwards: Ring buffer clock went backwards: 20613921464 -> 20613921463 ------------[ cut here ]------------ WARNING: CPU: 2 PID: 0 at kernel/trace/ring_buffer.c:3412 check_buffer+0x1b9/0x1c0 Modules linked in: [..] [CPU: 2]TIME DOES NOT MATCH expected:20620711698 actual:20620711697 delta:6790234 before:20613921463 after:20613921463 [20613915818] PAGE TIME STAMP [20613915818] delta:0 [20613915819] delta:1 [20613916035] delta:216 [20613916465] delta:430 [20613916575] delta:110 [20613916749] delta:174 [20613917248] delta:499 [20613917333] delta:85 [20613917775] delta:442 [20613917921] delta:146 [20613918321] delta:400 [20613918568] delta:247 [20613918768] delta:200 [20613919306] delta:538 [20613919353] delta:47 [20613919980] delta:627 [20613920296] delta:316 [20613920571] delta:275 [20613920862] delta:291 [20613921152] delta:290 [20613921464] delta:312 [20613921464] delta:0 TIME EXTEND [20613921464] delta:0 This happened more than once, and always for an off by one result. It also started happening after commit aafe104aa9096 was added. Cc: stable@vger.kernel.org Fixes: aafe104aa9096 ("tracing: Restructure trace_clock_global() to never block") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-30tracing: Do not stop recording comms if the trace file is being readSteven Rostedt (VMware)
commit 4fdd595e4f9a1ff6d93ec702eaecae451cfc6591 upstream. A while ago, when the "trace" file was opened, tracing was stopped, and code was added to stop recording the comms to saved_cmdlines, for mapping of the pids to the task name. Code has been added that only records the comm if a trace event occurred, and there's no reason to not trace it if the trace file is opened. Cc: stable@vger.kernel.org Fixes: 7ffbd48d5cab2 ("tracing: Cache comms only after an event occurred") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-30tracing: Do not stop recording cmdlines when tracing is offSteven Rostedt (VMware)
commit 85550c83da421fb12dc1816c45012e1e638d2b38 upstream. The saved_cmdlines is used to map pids to the task name, such that the output of the tracing does not just show pids, but also gives a human readable name for the task. If the name is not mapped, the output looks like this: <...>-1316 [005] ...2 132.044039: ... Instead of this: gnome-shell-1316 [005] ...2 132.044039: ... The names are updated when tracing is running, but are skipped if tracing is stopped. Unfortunately, this stops the recording of the names if the top level tracer is stopped, and not if there's other tracers active. The recording of a name only happens when a new event is written into a ring buffer, so there is no need to test if tracing is on or not. If tracing is off, then no event is written and no need to test if tracing is off or not. Remove the check, as it hides the names of tasks for events in the instance buffers. Cc: stable@vger.kernel.org Fixes: 7ffbd48d5cab2 ("tracing: Cache comms only after an event occurred") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16tracing: Correct the length check which causes memory corruptionLiangyan
commit 3e08a9f9760f4a70d633c328a76408e62d6f80a3 upstream. We've suffered from severe kernel crashes due to memory corruption on our production environment, like, Call Trace: [1640542.554277] general protection fault: 0000 [#1] SMP PTI [1640542.554856] CPU: 17 PID: 26996 Comm: python Kdump: loaded Tainted:G [1640542.556629] RIP: 0010:kmem_cache_alloc+0x90/0x190 [1640542.559074] RSP: 0018:ffffb16faa597df8 EFLAGS: 00010286 [1640542.559587] RAX: 0000000000000000 RBX: 0000000000400200 RCX: 0000000006e931bf [1640542.560323] RDX: 0000000006e931be RSI: 0000000000400200 RDI: ffff9a45ff004300 [1640542.560996] RBP: 0000000000400200 R08: 0000000000023420 R09: 0000000000000000 [1640542.561670] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff9a20608d [1640542.562366] R13: ffff9a45ff004300 R14: ffff9a45ff004300 R15: 696c662f65636976 [1640542.563128] FS: 00007f45d7c6f740(0000) GS:ffff9a45ff840000(0000) knlGS:0000000000000000 [1640542.563937] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1640542.564557] CR2: 00007f45d71311a0 CR3: 000000189d63e004 CR4: 00000000003606e0 [1640542.565279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1640542.566069] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1640542.566742] Call Trace: [1640542.567009] anon_vma_clone+0x5d/0x170 [1640542.567417] __split_vma+0x91/0x1a0 [1640542.567777] do_munmap+0x2c6/0x320 [1640542.568128] vm_munmap+0x54/0x70 [1640542.569990] __x64_sys_munmap+0x22/0x30 [1640542.572005] do_syscall_64+0x5b/0x1b0 [1640542.573724] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [1640542.575642] RIP: 0033:0x7f45d6e61e27 James Wang has reproduced it stably on the latest 4.19 LTS. After some debugging, we finally proved that it's due to ftrace buffer out-of-bound access using a debug tool as follows: [ 86.775200] BUG: Out-of-bounds write at addr 0xffff88aefe8b7000 [ 86.780806] no_context+0xdf/0x3c0 [ 86.784327] __do_page_fault+0x252/0x470 [ 86.788367] do_page_fault+0x32/0x140 [ 86.792145] page_fault+0x1e/0x30 [ 86.795576] strncpy_from_unsafe+0x66/0xb0 [ 86.799789] fetch_memory_string+0x25/0x40 [ 86.804002] fetch_deref_string+0x51/0x60 [ 86.808134] kprobe_trace_func+0x32d/0x3a0 [ 86.812347] kprobe_dispatcher+0x45/0x50 [ 86.816385] kprobe_ftrace_handler+0x90/0xf0 [ 86.820779] ftrace_ops_assist_func+0xa1/0x140 [ 86.825340] 0xffffffffc00750bf [ 86.828603] do_sys_open+0x5/0x1f0 [ 86.832124] do_syscall_64+0x5b/0x1b0 [ 86.835900] entry_SYSCALL_64_after_hwframe+0x44/0xa9 commit b220c049d519 ("tracing: Check length before giving out the filter buffer") adds length check to protect trace data overflow introduced in 0fc1b09ff1ff, seems that this fix can't prevent overflow entirely, the length check should also take the sizeof entry->array[0] into account, since this array[0] is filled the length of trace data and occupy addtional space and risk overflow. Link: https://lkml.kernel.org/r/20210607125734.1770447-1-liangyan.peng@linux.alibaba.com Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@redhat.com> Cc: Xunlei Pang <xlpang@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Fixes: b220c049d519 ("tracing: Check length before giving out the filter buffer") Reviewed-by: Xunlei Pang <xlpang@linux.alibaba.com> Reviewed-by: yinbinbin <yinbinbin@alibabacloud.com> Reviewed-by: Wetp Zhang <wetp.zy@linux.alibaba.com> Tested-by: James Wang <jnwang@linux.alibaba.com> Signed-off-by: Liangyan <liangyan.peng@linux.alibaba.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16ftrace: Do not blindly read the ip address in ftrace_bug()Steven Rostedt (VMware)
commit 6c14133d2d3f768e0a35128faac8aa6ed4815051 upstream. It was reported that a bug on arm64 caused a bad ip address to be used for updating into a nop in ftrace_init(), but the error path (rightfully) returned -EINVAL and not -EFAULT, as the bug caused more than one error to occur. But because -EINVAL was returned, the ftrace_bug() tried to report what was at the location of the ip address, and read it directly. This caused the machine to panic, as the ip was not pointing to a valid memory address. Instead, read the ip address with copy_from_kernel_nofault() to safely access the memory, and if it faults, report that the address faulted, otherwise report what was in that location. Link: https://lore.kernel.org/lkml/20210607032329.28671-1-mark-pk.tsai@mediatek.com/ Cc: stable@vger.kernel.org Fixes: 05736a427f7e1 ("ftrace: warn on failure to disable mcount callers") Reported-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-22tracing: Restructure trace_clock_global() to never blockSteven Rostedt (VMware)
commit aafe104aa9096827a429bc1358f8260ee565b7cc upstream. It was reported that a fix to the ring buffer recursion detection would cause a hung machine when performing suspend / resume testing. The following backtrace was extracted from debugging that case: Call Trace: trace_clock_global+0x91/0xa0 __rb_reserve_next+0x237/0x460 ring_buffer_lock_reserve+0x12a/0x3f0 trace_buffer_lock_reserve+0x10/0x50 __trace_graph_return+0x1f/0x80 trace_graph_return+0xb7/0xf0 ? trace_clock_global+0x91/0xa0 ftrace_return_to_handler+0x8b/0xf0 ? pv_hash+0xa0/0xa0 return_to_handler+0x15/0x30 ? ftrace_graph_caller+0xa0/0xa0 ? trace_clock_global+0x91/0xa0 ? __rb_reserve_next+0x237/0x460 ? ring_buffer_lock_reserve+0x12a/0x3f0 ? trace_event_buffer_lock_reserve+0x3c/0x120 ? trace_event_buffer_reserve+0x6b/0xc0 ? trace_event_raw_event_device_pm_callback_start+0x125/0x2d0 ? dpm_run_callback+0x3b/0xc0 ? pm_ops_is_empty+0x50/0x50 ? platform_get_irq_byname_optional+0x90/0x90 ? trace_device_pm_callback_start+0x82/0xd0 ? dpm_run_callback+0x49/0xc0 With the following RIP: RIP: 0010:native_queued_spin_lock_slowpath+0x69/0x200 Since the fix to the recursion detection would allow a single recursion to happen while tracing, this lead to the trace_clock_global() taking a spin lock and then trying to take it again: ring_buffer_lock_reserve() { trace_clock_global() { arch_spin_lock() { queued_spin_lock_slowpath() { /* lock taken */ (something else gets traced by function graph tracer) ring_buffer_lock_reserve() { trace_clock_global() { arch_spin_lock() { queued_spin_lock_slowpath() { /* DEAD LOCK! */ Tracing should *never* block, as it can lead to strange lockups like the above. Restructure the trace_clock_global() code to instead of simply taking a lock to update the recorded "prev_time" simply use it, as two events happening on two different CPUs that calls this at the same time, really doesn't matter which one goes first. Use a trylock to grab the lock for updating the prev_time, and if it fails, simply try again the next time. If it failed to be taken, that means something else is already updating it. Link: https://lkml.kernel.org/r/20210430121758.650b6e8a@gandalf.local.home Cc: stable@vger.kernel.org Tested-by: Konstantin Kharlamov <hi-angel@yandex.ru> Tested-by: Todd Brandt <todd.e.brandt@linux.intel.com> Fixes: b02414c8f045 ("ring-buffer: Fix recursion protection transitions between interrupt context") # started showing the problem Fixes: 14131f2f98ac3 ("tracing: implement trace_clock_*() APIs") # where the bug happened Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212761 Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-22tracing: Map all PIDs to command linesSteven Rostedt (VMware)
commit 785e3c0a3a870e72dc530856136ab4c8dd207128 upstream. The default max PID is set by PID_MAX_DEFAULT, and the tracing infrastructure uses this number to map PIDs to the comm names of the tasks, such output of the trace can show names from the recorded PIDs in the ring buffer. This mapping is also exported to user space via the "saved_cmdlines" file in the tracefs directory. But currently the mapping expects the PIDs to be less than PID_MAX_DEFAULT, which is the default maximum and not the real maximum. Recently, systemd will increases the maximum value of a PID on the system, and when tasks are traced that have a PID higher than PID_MAX_DEFAULT, its comm is not recorded. This leads to the entire trace to have "<...>" as the comm name, which is pretty useless. Instead, keep the array mapping the size of PID_MAX_DEFAULT, but instead of just mapping the index to the comm, map a mask of the PID (PID_MAX_DEFAULT - 1) to the comm, and find the full PID from the map_cmdline_to_pid array (that already exists). This bug goes back to the beginning of ftrace, but hasn't been an issue until user space started increasing the maximum value of PIDs. Link: https://lkml.kernel.org/r/20210427113207.3c601884@gandalf.local.home Cc: stable@vger.kernel.org Fixes: bc0c38d139ec7 ("ftrace: latency tracer infrastructure") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-22ftrace: Handle commands when closing set_ftrace_filter fileSteven Rostedt (VMware)
commit 8c9af478c06bb1ab1422f90d8ecbc53defd44bc3 upstream. # echo switch_mm:traceoff > /sys/kernel/tracing/set_ftrace_filter will cause switch_mm to stop tracing by the traceoff command. # echo -n switch_mm:traceoff > /sys/kernel/tracing/set_ftrace_filter does nothing. The reason is that the parsing in the write function only processes commands if it finished parsing (there is white space written after the command). That's to handle: write(fd, "switch_mm:", 10); write(fd, "traceoff", 8); cases, where the command is broken over multiple writes. The problem is if the file descriptor is closed, then the write call is not processed, and the command needs to be processed in the release code. The release code can handle matching of functions, but does not handle commands. Cc: stable@vger.kernel.org Fixes: eda1e32855656 ("tracing: handle broken names in ftrace filter") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-07tracing: Fix stack trace event sizeSteven Rostedt (VMware)
commit 9deb193af69d3fd6dd8e47f292b67c805a787010 upstream. Commit cbc3b92ce037 fixed an issue to modify the macros of the stack trace event so that user space could parse it properly. Originally the stack trace format to user space showed that the called stack was a dynamic array. But it is not actually a dynamic array, in the way that other dynamic event arrays worked, and this broke user space parsing for it. The update was to make the array look to have 8 entries in it. Helper functions were added to make it parse it correctly, as the stack was dynamic, but was determined by the size of the event stored. Although this fixed user space on how it read the event, it changed the internal structure used for the stack trace event. It changed the array size from [0] to [8] (added 8 entries). This increased the size of the stack trace event by 8 words. The size reserved on the ring buffer was the size of the stack trace event plus the number of stack entries found in the stack trace. That commit caused the amount to be 8 more than what was needed because it did not expect the caller field to have any size. This produced 8 entries of garbage (and reading random data) from the stack trace event: <idle>-0 [002] d... 1976396.837549: <stack trace> => trace_event_raw_event_sched_switch => __traceiter_sched_switch => __schedule => schedule_idle => do_idle => cpu_startup_entry => secondary_startup_64_no_verify => 0xc8c5e150ffff93de => 0xffff93de => 0 => 0 => 0xc8c5e17800000000 => 0x1f30affff93de => 0x00000004 => 0x200000000 Instead, subtract the size of the caller field from the size of the event to make sure that only the amount needed to store the stack trace is reserved. Link: https://lore.kernel.org/lkml/your-ad-here.call-01617191565-ext-9692@work.hours/ Cc: stable@vger.kernel.org Fixes: cbc3b92ce037 ("tracing: Set kernel_stack's caller size properly") Reported-by: Vasily Gorbik <gor@linux.ibm.com> Tested-by: Vasily Gorbik <gor@linux.ibm.com> Acked-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-23tracing: Check length before giving out the filter bufferSteven Rostedt (VMware)
commit b220c049d5196dd94d992dd2dc8cba1a5e6123bf upstream. When filters are used by trace events, a page is allocated on each CPU and used to copy the trace event fields to this page before writing to the ring buffer. The reason to use the filter and not write directly into the ring buffer is because a filter may discard the event and there's more overhead on discarding from the ring buffer than the extra copy. The problem here is that there is no check against the size being allocated when using this page. If an event asks for more than a page size while being filtered, it will get only a page, leading to the caller writing more that what was allocated. Check the length of the request, and if it is more than PAGE_SIZE minus the header default back to allocating from the ring buffer directly. The ring buffer may reject the event if its too big anyway, but it wont overflow. Link: https://lore.kernel.org/ath10k/1612839593-2308-1-git-send-email-wgong@codeaurora.org/ Cc: stable@vger.kernel.org Fixes: 0fc1b09ff1ff4 ("tracing: Use temp buffer when filtering events") Reported-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-23tracing: Do not count ftrace events in top level enable outputSteven Rostedt (VMware)
commit 256cfdd6fdf70c6fcf0f7c8ddb0ebd73ce8f3bc9 upstream. The file /sys/kernel/tracing/events/enable is used to enable all events by echoing in "1", or disabling all events when echoing in "0". To know if all events are enabled, disabled, or some are enabled but not all of them, cating the file should show either "1" (all enabled), "0" (all disabled), or "X" (some enabled but not all of them). This works the same as the "enable" files in the individule system directories (like tracing/events/sched/enable). But when all events are enabled, the top level "enable" file shows "X". The reason is that its checking the "ftrace" events, which are special events that only exist for their format files. These include the format for the function tracer events, that are enabled when the function tracer is enabled, but not by the "enable" file. The check includes these events, which will always be disabled, and even though all true events are enabled, the top level "enable" file will show "X" instead of "1". To fix this, have the check test the event's flags to see if it has the "IGNORE_ENABLE" flag set, and if so, not test it. Cc: stable@vger.kernel.org Fixes: 553552ce1796c ("tracing: Combine event filter_active and enable into single flags field") Reported-by: "Yordan Karadzhov (VMware)" <y.karadz@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-23fgraph: Initialize tracing_graph_pause at task creationSteven Rostedt (VMware)
commit 7e0a9220467dbcfdc5bc62825724f3e52e50ab31 upstream. On some archs, the idle task can call into cpu_suspend(). The cpu_suspend() will disable or pause function graph tracing, as there's some paths in bringing down the CPU that can have issues with its return address being modified. The task_struct structure has a "tracing_graph_pause" atomic counter, that when set to something other than zero, the function graph tracer will not modify the return address. The problem is that the tracing_graph_pause counter is initialized when the function graph tracer is enabled. This can corrupt the counter for the idle task if it is suspended in these architectures. CPU 1 CPU 2 ----- ----- do_idle() cpu_suspend() pause_graph_tracing() task_struct->tracing_graph_pause++ (0 -> 1) start_graph_tracing() for_each_online_cpu(cpu) { ftrace_graph_init_idle_task(cpu) task-struct->tracing_graph_pause = 0 (1 -> 0) unpause_graph_tracing() task_struct->tracing_graph_pause-- (0 -> -1) The above should have gone from 1 to zero, and enabled function graph tracing again. But instead, it is set to -1, which keeps it disabled. There's no reason that the field tracing_graph_pause on the task_struct can not be initialized at boot up. Cc: stable@vger.kernel.org Fixes: 380c4b1411ccd ("tracing/function-graph-tracer: append the tracing_graph_flag") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=211339 Reported-by: pierre.gondois@arm.com Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-30tracing: Fix race in trace_open and buffer resize callGaurav Kohli
commit bbeb97464eefc65f506084fd9f18f21653e01137 upstream. Below race can come, if trace_open and resize of cpu buffer is running parallely on different cpus CPUX CPUY ring_buffer_resize atomic_read(&buffer->resize_disabled) tracing_open tracing_reset_online_cpus ring_buffer_reset_cpu rb_reset_cpu rb_update_pages remove/insert pages resetting pointer This race can cause data abort or some times infinte loop in rb_remove_pages and rb_insert_pages while checking pages for sanity. Take buffer lock to fix this. Link: https://lkml.kernel.org/r/1601976833-24377-1-git-send-email-gkohli@codeaurora.org Cc: stable@vger.kernel.org Fixes: 83f40318dab00 ("ring-buffer: Make removal of ring buffer pages atomic") Reported-by: Denis Efremov <efremov@linux.com> Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-11tracing: Fix userstacktrace option for instancesSteven Rostedt (VMware)
commit bcee5278958802b40ee8b26679155a6d9231783e upstream. When the instances were able to use their own options, the userstacktrace option was left hardcoded for the top level. This made the instance userstacktrace option bascially into a nop, and will confuse users that set it, but nothing happens (I was confused when it happened to me!) Cc: stable@vger.kernel.org Fixes: 16270145ce6b ("tracing: Add trace options for core options to instances") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-11ftrace: Fix updating FTRACE_FL_TRAMPNaveen N. Rao
commit 4c75b0ff4e4bf7a45b5aef9639799719c28d0073 upstream. On powerpc, kprobe-direct.tc triggered FTRACE_WARN_ON() in ftrace_get_addr_new() followed by the below message: Bad trampoline accounting at: 000000004222522f (wake_up_process+0xc/0x20) (f0000001) The set of steps leading to this involved: - modprobe ftrace-direct-too - enable_probe - modprobe ftrace-direct - rmmod ftrace-direct <-- trigger The problem turned out to be that we were not updating flags in the ftrace record properly. From the above message about the trampoline accounting being bad, it can be seen that the ftrace record still has FTRACE_FL_TRAMP set though ftrace-direct module is going away. This happens because we are checking if any ftrace_ops has the FTRACE_FL_TRAMP flag set _before_ updating the filter hash. The fix for this is to look for any _other_ ftrace_ops that also needs FTRACE_FL_TRAMP. Link: https://lkml.kernel.org/r/56c113aa9c3e10c19144a36d9684c7882bf09af5.1606412433.git.naveen.n.rao@linux.vnet.ibm.com Cc: stable@vger.kernel.org Fixes: a124692b698b0 ("ftrace: Enable trampoline when rec count returns back to one") Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18ring-buffer: Fix recursion protection transitions between interrupt contextSteven Rostedt (VMware)
[ Upstream commit b02414c8f045ab3b9afc816c3735bc98c5c3d262 ] The recursion protection of the ring buffer depends on preempt_count() to be correct. But it is possible that the ring buffer gets called after an interrupt comes in but before it updates the preempt_count(). This will trigger a false positive in the recursion code. Use the same trick from the ftrace function callback recursion code which uses a "transition" bit that gets set, to allow for a single recursion for to handle transitions between contexts. Cc: stable@vger.kernel.org Fixes: 567cd4da54ff4 ("ring-buffer: User context bit recursion checking") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10tracing: Fix out of bounds write in get_trace_bufQiujun Huang
commit c1acb4ac1a892cf08d27efcb964ad281728b0545 upstream. The nesting count of trace_printk allows for 4 levels of nesting. The nesting counter starts at zero and is incremented before being used to retrieve the current context's buffer. But the index to the buffer uses the nesting counter after it was incremented, and not its original number, which in needs to do. Link: https://lkml.kernel.org/r/20201029161905.4269-1-hqjagain@gmail.com Cc: stable@vger.kernel.org Fixes: 3d9622c12c887 ("tracing: Add barrier to trace_printk() buffer nesting modification") Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-07-15 09:17:50 +0000