| Age | Commit message (Collapse) | Author |
|---|
|
atmdev_ops::pre_send (a TX pre-processing hook) and ::send_bh (a
bottom-half capable send variant) have no implementation behind them:
no remaining ATM driver sets either, so vcc_sendmsg() always skipped
pre_send and the raw AAL0/AAL5 paths always fell back to ->send().
The drivers that used these hooks were removed with the legacy ATM
adapters.
Drop both operations and the dead branches that tested for them.
Link: https://patch.msgid.link/20260615194416.752559-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
atmdev_ops::change_qos() was the hook for renegotiating the traffic
parameters of an already-connected VCC, driven from SO_ATMQOS on a
connected socket (and previously from the SVC as_modify path, now gone).
None of the ATM drivers left in tree implement it - solos-pci only listed
change_qos = NULL - so atm_change_qos() always returned -EOPNOTSUPP.
Drop the operation and return -EOPNOTSUPP directly.
Link: https://patch.msgid.link/20260615194416.752559-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ATM switched virtual circuits (SVCs) are set up and torn down by a
user-space signaling daemon (atmsigd) which the kernel talks to over
a dedicated "sigd" socket: the kernel marshals Q.2931-style requests
(as_connect, as_listen, as_accept, as_close, ...) to the daemon and
applies the results to PF_ATMSVC sockets. This is the machinery behind
classical SVC use and was the foundation for LANE / MPOA, all of which
have been removed.
DSL deployments do not use any of this. PPPoATM and BR2684 run over
permanent virtual circuits (PF_ATMPVC) with a statically configured
VPI/VCI; no atmsigd, no Q.2931. Neither remaining ATM driver
(solos-pci, the USB DSL modems) is reachable through the SVC path.
Remove the SVC socket family and the signaling interface:
- delete net/atm/svc.c, net/atm/signaling.c and signaling.h
- drop atmsvc_init()/atmsvc_exit() and the PF_ATMSVC registration and
module alias
- drop the ATMSIGD_CTRL ioctl (sigd_attach) and the /proc/net/atm/svc
file
- fold the SVC branch out of atm_change_qos(); all sockets are PVCs now
The obsolete ATM_SETSC ioctl stub is left in place (it already just
warns and returns 0), as is the struct atm_vcc SVC bookkeeping shared
with the queueing layer.
Link: https://patch.msgid.link/20260615194416.752559-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
net/atm/addr.c maintained the per-device lists of local NSAP addresses
(dev->local) and ILMI-learned LECS addresses (dev->lecs). These exist
solely to serve SVC signaling: the lists are populated through the
ATM_{ADD,DEL,RST}ADDR / ATM_{ADD,DEL,GET}LECSADDR ioctls used by the
atmsigd / ILMI daemons, and consumed when registering addresses with the
signaling daemon. The LECS list belonged to LAN Emulation, which has
been removed.
With no SVC users in a DSL-only configuration these lists are always
empty, so drop the registry entirely:
- remove the ADDR/LECSADDR/RSTADDR ioctls
- drop the now-always-empty "atmaddress" sysfs attribute
- remove the dev->local / dev->lecs lists, structs and enums
- delete net/atm/addr.c and net/atm/addr.h
The device ESI ("MAC" address) and its ATM_{G,S}ETESI ioctls and
"address" sysfs attribute are retained - the USB DSL modems populate
the ESI.
Link: https://patch.msgid.link/20260615194416.752559-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The atmdev_ops::send_oam device operation and the atm_vcc::push_oam
callback were the kernel's interface for raw F4/F5 OAM cell exchange.
Nothing assigns them a non-NULL value and nothing ever invokes them:
the core only ever initialises push_oam to NULL (in vcc_create() and the
AAL init helpers) and the Solos driver only lists send_oam = NULL for
documentation. The drivers that actually drove OAM through these hooks
were removed along with the legacy ATM adapters.
Drop both callbacks and the NULL initialisers.
Link: https://patch.msgid.link/20260615194416.752559-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The normal task_work path used a tw_pending bit to ensure the callback
was only added once: the mpscq drains incrementally, so a single
tctx_task_work() run can take the queue through empty -> non-empty
several times, and each transition would otherwise re-add the already
pending callback_head. This corrupts the task_work list, and is what
tw_pending protects again.
This can go away, if we stop running the task_work as soon as the queue
empties.
Suggested-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Heiko Carstens says:
===================
This is supposed to improve s390 idle time accounting, and brings it
back to the state it was before arch_cpu_idle_time() was removed from
s390 [3].
In result all cpu time accounting is done by the s390 architecture backend
again, instead of having a mix of architecure specific and common code
accounting (common code: idle, s390 architecture: everything else).
===================
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig updates from Masami Hiramatsu:
- bootconfig: move xbc_snprint_cmdline() to lib/bootconfig.c
Move the xbc_snprint_cmdline() function and its buffer from
main.c to the shared lib/bootconfig.c parser library so it
can be reused by userspace tools.
- render kernel.* subtree as cmdline string with -C
Add a new -C option to print the kernel.* subtree as a flat
command-line string at build time, allowing early parameter
injection without runtime parsing.
* tag 'bootconfig-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/bootconfig: render kernel.* subtree as cmdline string with -C
bootconfig: move xbc_snprint_cmdline() to lib/bootconfig.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
"Fixes to tool and kunit core and new features to both to support JUnit
XML (primitive) and backtrace suppression API:
- Core support for suppressing warning backtraces
- Parse and print the reason tests are skipped
- Add (primitive) support for outputting JUnit XML
- Don't write to stdout when it should be disabled
- Add backtrace suppression self-tests
- Suppress intentional warning backtraces in scaling unit tests
- Add documentation for warning backtrace suppression API
- Fix spelling mistakes in comments and messages
- gen_compile_commands: Ignore libgcc.a
- qemu_configs: Add or1k / openrisc configuration"
* tag 'linux_kselftest-kunit-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit:tool: Don't write to stdout when it should be disabled
kunit: tool: Add (primitive) support for outputting JUnit XML
kunit: tool: Parse and print the reason tests are skipped
kunit: Add documentation for warning backtrace suppression API
drm: Suppress intentional warning backtraces in scaling unit tests
kunit: Add backtrace suppression self-tests
bug/kunit: Core support for suppressing warning backtraces
kunit: Fix spelling mistakes in comments and messages
kunit: qemu_configs: Add or1k / openrisc configuration
gen_compile_commands: Ignore libgcc.a
|
|
Headers under include/ aren't supposed to try to include headers from
driver directories, such as i915_reg_defs.h. Remove it.
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20260615152837.1898991-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Per-controller admin and IO timeout sysfs attributes, and
letting the block layer set request timeouts (Maurizio,
Maximilian)
- Multipath passthrough iostats, and PCI P2PDMA enablement for
multipath devices (Keith, Kiran)
- A new diag sysfs attribute group exporting per-controller
counters (retries, multipath failover, error counters, requeue
and failure counts, reset and reconnect events) (Nilay)
- FDP configuration validation and bounds check fixes (liuxixin)
- Various nvmet fixes, including a pre-auth out-of-bounds read in
the Discovery Get Log Page handler, auth payload bounds
validation, and tcp error-path leak fixes (Bryam, Tianchu,
Geliang)
- nvme-tcp lockdep and workqueue fixes (Shin'ichiro, Kuniyuki,
Eric)
- Assorted other fixes and cleanups (John, Yao, Chao, Mateusz,
Achkinazi, Wentao)
- MD pull request via Yu Kuai:
- raid1/raid10 fixes for a deadlock in the read error recovery
path, error-path detection and bio accounting with cloned bios,
and an nr_pending leak in the REQ_ATOMIC bad-block error path
(Abd-Alrhman)
- PCI P2PDMA propagation from member devices to the RAID device
(Kiran)
- dm-raid bio requeue fix, and various smaller fixes and cleanups
(Benjamin, Chen, Li, Thorsten)
- Enable Clang lock context analysis for the block layer, with the
accompanying annotations across queue limits, the blk_holder_ops
callbacks, crypto, cgroup, iocost, kyber and mq-deadline (Bart)
- Block status code infrastructure work: a tagged status table, a
str_to_blk_op() helper, a bio_endio_status() helper, and on top of
that a new configurable block-layer error injection facility
(Christoph)
- DRBD netlink rework, replacing the genl_magic machinery with explicit
netlink serialization and moving the DRBD UAPI headers to
include/uapi/linux/ (Christoph Böhmwalder)
- bvec improvements: a bvec_folio() helper and making the bvec_iter
helpers proper inline functions (Willy, Christoph)
- ublk cleanups and a canceling-flag fix for the disk-not-allocated
case (Caleb, Ming)
- Partition handling fixes: bound the AIX pp_count scan, fix an of_node
refcount leak, and replace __get_free_page() with kmalloc() (Bryam,
Wentao, Mike)
- Convert numa_node to int in blk_mq_hw_ctx and ->init_request, and add
WQ_PERCPU to the block workqueue users (Mateusz, Marco)
- Block statistics and tracing: propagate in-flight to the whole disk
on partition IO, export passthrough stats, and a new
block_rq_tag_wait tracepoint (Tang, Keith, Aaron)
- A round of removals, unexports and cleanups across bio, direct-io and
the bvec helpers (Christoph)
- Various driver fixes (mtip32xx use-after-free, rbd snap_count
validation and strscpy conversion, nbd socket lockdep reclassify,
virtio-blk zone report clamp, floppy) and a batch of MAINTAINERS
email/list updates (Coly, Li, Yu, Christoph Böhmwalder)
- Other little fixes and cleanups all over
* tag 'for-7.2/block-20260615' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (117 commits)
MAINTAINERS: Update Coly Li's email address
block: check bio split for unaligned bvec
nbd: Reclassify sockets to avoid lockdep circular dependency
block: add configurable error injection
block: add a str_to_blk_op helper
block: add a "tag" for block status codes
block: add a macro to initialize the status table
floppy: Drop unused pnp driver data
block: propagate in_flight to whole disk on partition I/O
virtio-blk: clamp zone report to the report buffer capacity
block: optimize I/O merge hot path with unlikely() hints
drivers/block/rbd: Use strscpy() to copy strings into arrays
partitions: aix: bound the pp_count scan to the ppe array
block: Enable lock context analysis
block/mq-deadline: Make the lock context annotations compatible with Clang
block/Kyber: Make the lock context annotations compatible with Clang
block/blk-mq-debugfs: Improve lock context annotations
block/blk-iocost: Inline iocg_lock() and iocg_unlock()
block/blk-iocost: Split ioc_rqos_throttle()
block/crypto: Annotate the crypto functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring updates from Jens Axboe:
- Rework the task_work infrastructure.
Both the local (DEFER_TASKRUN) and the normal (tctx) task_work lists
were llist based, which is LIFO ordered, and hence each run had to do
an O(n) list reversal pass first to restore queue order.
Additionally, to cap the amount of task_work run, each method needed
a retry list as well.
Add a lockless MPCS FIFO queue (based on Dmitry Vyukov's intrusive
MPSC algorithm) and switch both task_work lists to it. It performs
better than llists and we can then also ditch the retry lists as well
as entries are popped one-at-the-time.
On top of those changes, run the tctx fallback task_work directly and
remove the now-unused per-ctx fallback machinery entirely.
- zcrx user notifications.
Add a mechanism for zcrx to communicate conditions back to userspace
via a dedicated CQE, with the initial users being notification on
running out of buffers and on a frag copy fallback, plus
shared-memory notification statistics.
Alongside that, a series of zcrx reliability and cleanup fixes: more
reliable scrubbing, poisoning pointers on unregistration, dropping an
extra ifq close, adding a ctx back-pointer, reordering fd allocation
in the export path, and killing a dead 'sock' member.
- Allow using io_uring registered buffers for plain SEND and RECV, not
just for the zero-copy send path.
This enables targets like ublk's NBD backend to push/pull IO data
directly to/from a registered buffer over a plain send/recv on a TCP
socket.
- Registered buffer improvements: account huge pages correctly, bump
the io_mapped_ubuf length field to size_t, and raise the previous 1GB
registered buffer size limit.
- Restrict the ctx access exposed to io_uring BPF struct_ops programs
by handing them an opaque type rather than the full io_ring_ctx, and
add a separate MAINTAINERS entry for the bpf-ops code.
- Allow opcode filtering on IORING_OP_CONNECT.
- Validate ring-provided buffer addresses with access_ok(), and align
the legacy buffer add limit with MAX_BIDS_PER_BGID.
- Various other cleanups and minor fixes, including avoiding msghdr
async data on connect/bind, dropping async_size for OP_LISTEN, making
the POLL_FIRST receive side checks consistent, re-checking
IO_WQ_BIT_EXIT for each linked work item, and using
trace_call__##name() at guarded tracepoint call sites.
* tag 'for-7.2/io_uring-20260615' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (31 commits)
io_uring/bpf-ops: add a separate maintainer entry
io_uring/net: make POLL_FIRST receive side checks consistent
io_uring: remove the per-ctx fallback task_work machinery
io_uring: run the tctx task_work fallback directly
io_uring: switch normal task_work to a mpscq
io_uring: switch local task_work to a mpscq
io_uring/mpscq: add lockless multi-producer, single-consumer FIFO queue
io_uring: grab RCU read lock marking task run
io_uring/zcrx: kill dead 'sock' member in struct io_zcrx_args
io_uring/kbuf: validate ring provided buffer addresses with access_ok()
io_uring/net: support registered buffer for plain send and recv
io_uring/nop: Drop a wrong comment in struct io_nop
io_uring/net: Remove async_size for OP_LISTEN
io_uring/net: Avoid msghdr on op_connect/op_bind async data
io_uring/bpf-ops: restrict ctx access to BPF
io_uring/io-wq: re-check IO_WQ_BIT_EXIT for each linked work item
io_uring/kbuf: align legacy buffer add limit with MAX_BIDS_PER_BGID
io_uring/zcrx: add shared-memory notification statistics
io_uring/zcrx: notify user on frag copy fallback
io_uring/zcrx: notify user when out of buffers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/hfs
Pull hfs/hfsplus updates from Viacheslav Dubeyko:
"Several fixes in HFS/HFS+ of syzbot reported issues and HFS//HFS+
fixes of xfstests failures.
- fix a null-ptr-deref issue reported by syzbot (Edward Adam Davis)
If the attributes file is not loaded during system mount
hfsplus_create_attributes_file can dereference a NULL pointer.
Also, add a b-tree node size check in hfs_btree_open() with the
goal to prevent an uninit-value bug reported by syzbot for the case
of corrupted HFS+ image.
- fix __hfs_bnode_create() by using kzalloc_flex() instead of
kzalloc() (Rosen Penev)
- fix early return in hfs_bnode_read() (Tristan Madani)
hfs_bnode_read() can return early without writing to the output
buffer when is_bnode_offset_valid() fails or when
check_and_correct_requested_ length() corrects the length to zero.
Callers such as hfs_bnode_read_ u16() and hfs_bnode_read_u8() pass
stack-allocated buffers and use the result unconditionally, leading
to KMSAN uninit-value reports.
The rest fix (1) generic/637, generic/729 issue for the case of HFS+
file system, (2) generic/003, generic/637 for the case of HFS file
system"
* tag 'hfs-v7.2-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/hfs:
hfs: rework hfsplus_readdir() logic
hfs: disable the updating of file access times (atime)
hfs: fix incorrect inode ID assignment in hfs_new_inode()
hfsplus: rework hfsplus_readdir() logic
hfs/hfsplus: zero-initialize buffer in hfs_bnode_read
hfs/hfsplus: fix u32 overflow in check_and_correct_requested_length
hfsplus: Add a sanity check for btree node size
hfsplus: fix issue of direct writes beyond end-of-file
hfs/hfxplus: use kzalloc_flex()
hfsplus: Remove the duplicate attr inode dirty marking action
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"The most noticeable change is to enable large folios by default, it's
been in testing for a few releases. Related to that is huge folio
support (still under experimental config). Otherwise a few ioctl
updates, performance improvements and usual fixes and core changes.
User visible changes:
- enable large folios by default, added in 6.17 (under experimental
build), no feature limitations, a big change internally
- new ioctl to return raw checksums to userspace (a bit tricky given
compression and tail extents), can be used for mkfs and
deduplication optimizations
- provide stable UUID for e.g. overlayfs and temp_fsid, also
reflected in statvfs() field f_fsid, internal dev_t is hashed in to
allow cloning
- add 32bit compat version of GET_SUBVOL_INFO ioctl
- in experimental build, support huge folios (up to 2M)
Performance related improvements/changes:
- limit bio size to the estimated optimum derived from the queue,
this prevents build up of too much data for writeback, which could
cause latency spikes (reported improvement 15% on sequential
writes)
- don't force direct IO to be serialized, forgotten change during
mount API port, brings back +60% of throughput
- lockless calculation of number of shrinkable extent maps, improve
performance with many memcg allocated objects
Notable fixes:
- in zoned mode, fix a deadlock due to zone reclaim and relocation
when space needs to be flushed
- don't trim device which is internally not tracked as writeable
(e.g. when missing device is being rescanned)
- fix deadlock when cloning inline extent and mounted with
flushoncommit
- fix false IO failures after direct IO falls back to buffered write
in some cases
Core:
- remove COW fixup mechanism completely; detect and fix changes to
pages outside of filesystem tracking, guaranteed since 5.8, grace
period is over
- remove 2K block size support, experimental to test subpage code on
x86_64 but now it would block folio changes
- tree-checker improvements of:
- free-space cache and tree items
- root reference and backref items
- extent state exceptions in reloc tree
- subpage mode updates:
- code optimizations, simplify tracking bitmaps
- re-enable readahead of compressed extent
- extend bitmap size to cover huge folios
- add tracepoints related to sync, tree-log and transactions
- device stats item tracking unification, remove item if there are no
stats recorded, also don't leave stale stats on replaced device
- allow extent buffer pages to be allocated as movable, to help page
migration
- added checks for proper extent buffer release
- btrfs.ko code size reduction due to transaction abort call
simplifications
- several struct size reductions
- more auto free conversions
- more verbose assertions"
* tag 'for-7.2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (130 commits)
btrfs: fix use-after-free after relocation failure with concurrent COW
btrfs: move WARN_ON on unexpected error in __add_tree_block()
btrfs: move locking into btrfs_get_reloc_bg_bytenr()
btrfs: lzo: reject compressed segment that overflows the compressed input
btrfs: retry faulting in the pages after a zero sized short direct write
btrfs: fix incorrect buffered IO fallback for append direct writes
btrfs: fix false IO failure after falling back to buffered write
btrfs: use verbose assertions in backref.c
btrfs: print a message when a missing device re-appears
btrfs: do not trim a device which is not writeable
btrfs: return real error after lookup failure in btrfs_ioctl_default_subvol()
btrfs: use mapping shared locking for reading super block
btrfs: use lockless read in nr_cached_objects shrinker callback
btrfs: switch local indicator variables to bools
btrfs: send: pass bool for pending_move and refs_processed parameters
btrfs: use shifts for sectorsize and nodesize
btrfs: fix deadlock cloning inline extent when using flushoncommit
btrfs: allocate eb-attached btree pages as movable
btrfs: add 32-bit compat ioctl for BTRFS_IOC_GET_SUBVOL_INFO
btrfs: derive f_fsid from on-disk fsid and dev_t
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify updates from Jan Kara:
- fanotify improvements for pidfd reporting
- small cleanup in fanotify_error_event_equal
* tag 'fsnotify_for_v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: allow reporting pidfds for reaped tasks
fanotify: report thread pidfds for FAN_REPORT_TID
fanotify: simplify fanotify_error_event_equal
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- lkdtm:
- Add case to provoke a crash in EFI runtime services (Ard Biesheuvel)
- add PPC_RADIX_TLBIEL test and missed isync (Sayali Patil)
- stddef: Document designated initializer semantics for
__TRAILING_OVERLAP() (Gustavo A. R. Silva)
- strarray: drop redundant allocation, add __counted_by_ptr (Thorsten
Blum)
* tag 'hardening-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm/powerpc: add PPC_RADIX_TLBIEL test for radix MCE validation
lkdtm/powerpc: add isync after slbmte to enforce SLB update ordering
lkdtm: Add case to provoke a crash in EFI runtime services
lib/string_helpers: annotate struct strarray with __counted_by_ptr
lib/string_helpers: drop redundant allocation in kasprintf_strarray
MAINTAINERS: add kernel hardening keyword __counted_by_ptr
stddef: Document designated initializer semantics for __TRAILING_OVERLAP()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Drop support for off-CPU cryptography in af_alg
- Document that af_alg is *always* slower
- Document the deprecation of af_alg
- Remove zero-copy support from skcipher and aead in af_alg
- Cap AEAD AD length to 0x80000000 in af_alg
- Free default RNG on module exit
Algorithms:
- Fix vli multiplication carry overflow in ecc
- Drop unused cipher_null crypto_alg
- Remove unused variants of drbg
- Use lib/crypto in drbg
- Use memcpy_from/to_sglist in authencesn
- Allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
- Disallow RSA PKCS#1 SHA-1 sig algs in FIPS mode
- Filter out async aead implementations at alloc in krb5
- Fix non-parallel fallback by rstoring callback in pcrypt
- Validate poly1305 template argument in chacha20poly1305
Drivers:
- Add sysfs PCI reset support to qat
- Add KPT support for GEN6 devices to qat
- Remove unused character device and ioctls from qat
- Add support for hw access via SMCC to mtk
- Remove prng support from crypto4xx
- Remove prng support from hisi-trng
- Remove prng support from sun4i-ss
- Remove prng support from xilinx-trng
- Remove loongson-rng
- Remove exynos-rng
Others:
- Remove support for AIO on sockets"
* tag 'v7.2-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (196 commits)
crypto: tegra - fix refcount leak in tegra_se_host1x_submit()
crypto: rng - Free default RNG on module exit
crypto: testmgr - allow authenc(hmac(sha{256,384}),cts(cbc(aes))) in FIPS mode
hwrng: jh7110 - fix refcount leak in starfive_trng_read()
crypto: atmel-ecc - drop dead code in atmel_ecdh_max_size
crypto: cavium/cpt - fix DMA cleanup using wrong loop index
crypto: marvell/octeontx - fix DMA cleanup using wrong loop index
MAINTAINERS: make myself the maintainer of the Qualcomm QCE driver
crypto: amcc - convert irq_of_parse_and_map to platform_get_irq
crypto: sun4i-ss - Remove insecure and unused rng_alg
hwrng: xilinx - Move xilinx-rng into drivers/char/hw_random/
crypto: xilinx-trng - Replace crypto_drbg_ctr_df() with HMAC-SHA512
crypto: xilinx-trng - Fix return value of xtrng_hwrng_trng_read()
crypto: xilinx-trng - Remove crypto_rng interface
crypto: exynos-rng - Remove exynos-rng driver
hwrng: hisi-trng - Move hisi-trng into drivers/char/hw_random/
crypto: hisi-trng - Remove crypto_rng interface
crypto: loongson - Remove broken and unused loongson-rng
crypto: crypto4xx - Remove insecure and unused rng_alg
crypto: qat - validate RSA CRT component lengths
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- Support for "allocation tokens" (currently available in Clang 22+)
for smarter partitioning of kmalloc caches based on the allocated
object type, which can be enabled instead of the "random"
per-caller-address-hash partitioning.
It should be able to deterministically separate types containing a
pointer from those that do not (Marco Elver)
- Improvements and simplification of the kmem_cache_alloc_bulk() and
mempool_alloc_bulk() API. This includes adaptation of callers
(Christoph Hellwig)
- Performance improvements and cleanups related mostly to sheaves
refill (Hao Li, Shengming Hu, Vlastimil Babka)
- Several fixups for the slabinfo tool (Xuewen Wang)
* tag 'slab-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: do not limit zeroing to orig_size when only red zoning is enabled
mm/slub: preserve original size in _kmalloc_nolock_noprof retry path
mm: simplify the mempool_alloc_bulk API
mm/slab: improve kmem_cache_alloc_bulk
mm/slub: detach and reattach partial slabs in batch
mm/slub: introduce helpers for node partial slab state
mm/slub: use empty sheaf helpers for oversized sheaves
tools/mm/slabinfo: remove redundant slab->partial assignment
tools/mm/slabinfo: remove dead assignment in get_obj_and_str()
tools/mm/slabinfo: Fix trace disable logic inversion
MAINTAINERS: add slab-related scripts and tools to SLAB ALLOCATOR
mm/slub: fix typo in sheaves comment
mm, slab: simplify returning slab in __refill_objects_node()
mm, slab: add an optimistic __slab_try_return_freelist()
slab: fix kernel-docs for mm-api
slab: improve KMALLOC_PARTITION_RANDOM randomness
slab: support for compiler-assisted type-based slab cache partitioning
mm/slub: defer freelist construction until after bulk allocation from a new slab
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Beside the removal of the Hercules monochrome ISA graphics driver and
the corresponding text console driver, there is just the typical
maintanance with smaller driver fixes and cleanups:
Removal of drivers:
- Hercules monochrome ISA graphics adapter driver (Ethan Nelson-Moore)
- Hercules mdacon console driver (Ethan Nelson-Moore)
Changes affecting many drivers at once:
- possible memory leak fixes in various drivers (Abdun Nihaal)
- many conversions to use strscpy() (David Laight)
- Use named initializers in drivers (Uwe Kleine-König)
Code fixes:
- fbcon: don't suspend/resume when vc is graphics mode (Lu Yao)
- modedb: fix a possible UAF in fb_find_mode() (Tuo Li)
- modedb: Fix entry for 1920x1080-60 mode (Steffen Persvold)
- arm: Export acorndata_8x8 font symbol for bootloader (Helge Deller)
- omap2: fix use-after-free in omapfb_mmap (Hongling Zeng)
Cleanups:
- pxa168fb: use devm_ioremap_resource() (Alberto Arostegui)
- provice helpers for fb_set_var() and fb_blank() and fbcon updates
(Thomas Zimmermann)
- fbcon: Use correct type for vc_resize() return value (Jiacheng Yu)
- chipsfb: add missing MODULE_DESCRIPTION() macro (Rahman Mahmutović)
- sunxvr2500: replace printk with device-aware logging functions
(Rahman Mahmutović)
- sm712: Fix operator precedence in big_swap macro (Li RongQing)
- imxfb: Use of_device_get_match_data() (Rosen Penev)
- atmel_lcdfb: Use of_device_get_match_data() (Rosen Penev)
Documentation fixes:
- grvga: Fix CLUT register address offset in comment (Eduardo Silva)
- omap/dss: Fix stale modedb.c path (Costa Shulyupin)
- correct CONFIG_FB_TILEBLITTING macro name in #endif comment (Ethan
Nelson-Moore)"
* tag 'fbdev-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (43 commits)
fbdev: modedb: Fix misaligned fields in the 1920x1080-60 mode
fbdev: modedb: fix a possible UAF in fb_find_mode()
fbdev: s3fb: Use strscpy() to copy strings into arrays
fbdev: sm501fb: Fix buffer errors in OF binding code
fbcon: correct CONFIG_FB_TILEBLITTING macro name in #endif comment
fbdev/arm: Export acorndata_8x8 font symbol for bootloader
fbdev: mmpfb: Use strscpy() to copy device name
fbdev: sisfb: Replace strlen() strcpy() pair with strscpy()
fbdev: rivafb: Use strscpy() to copy device name
fbdev: cyber2000fb: Use strscpy() to copy device name
fbdev: atmel_lcdfb: Use strscpy() to copy device name
fbdev: Do not export fbcon from fbdev
fbdev: Wrap fbcon updates from vga-switcheroo in helper
fbdev: Wrap user-invoked calls to fb_blank() in helper
fbdev: Wrap user-invoked calls to fb_set_var() in helper
fbdev: omap2: fix use-after-free in omapfb_mmap
docs: omap/dss: Fix stale modedb.c path
fbdev: pxa168fb: use devm_ioremap_resource() for MMIO
fbdev: grvga: Fix CLUT register address offset in comment
fbdev: sunxvr2500: replace printk with device-aware logging functions
...
|
|
Pull MMC updates from Ulf Hansson:
"MMC core:
- Validate host's max_segs to fail gracefully
MMC host:
- davinci:
- Avoid potential NULL dereference in the IRQ handler
- Call mmc_add_host() in the correct order during probe
- dw_mmc-exynos:
- Increase DMA threshold for exynos7870
- renesas_sdhi:
- Add support for RZ/G2E, RZ/G2N and R-Car M3Le variants
- sdhci-msm:
- Add support for Hawi, Eliza and Shikra variants
- sdhci-of-k1:
- Add support for SD UHS-I modes
- Add support for tuning for eMMC HS200 and SD UHS-I"
* tag 'mmc-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (24 commits)
mmc: dw_mmc: Add desc_num field for clarity
dt-bindings: mmc: sdhci-msm: Rename the binding to include 'qcom' prefix
mmc: sdhci-of-dwcmshc: use dev_err_probe() to simplify error paths
mmc: sdhci-of-dwcmshc: remove redundant IS_ERR() check
dt-bindings: mmc: sdhci-msm: qcom: Add Hawi compatible
mmc: renesas_sdhi: Add OF entry for RZ/G2E SoC
mmc: renesas_sdhi: Add OF entry for RZ/G2N SoC
dt-bindings: mmc: sdhci-msm: Add Eliza compatible
mmc: davinci: fix mmc_add_host order in probe
dt-bindings: mmc: sdhci-msm: Document the Shikra compatible
mmc: sdhci-of-k1: add comprehensive SDR tuning support
mmc: sdhci-of-k1: add regulator and pinctrl voltage switching support
mmc: sdhci-of-k1: enable essential clock infrastructure for SD operation
dt-bindings: mmc: spacemit,sdhci: add pinctrl support for voltage switching
mmc: via-sdmmc: Simplify initialisation of pci_device_id array
mmc: davinci: avoid NULL deref of host->data in IRQ handler
memstick: Constify the driver id_table
mmc: host: Move MODULE_DEVICE_TABLE next to the table itself
mmc: renesas_sdhi: add R-Car M3Le compatibility string
dt-bindings: mmc: renesas,sdhi: Document R-Car M3Le support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers for the following chips:
- Analog Devices LTC4283 Swap Controller
- Analog Devices MAX20830
- Analog Devices MAX20860A
- ARCTIC Fan Controller
- Delta E50SN12051
- Luxshare LX1308
- Microchip EMC1812/13/14/15/33
- Monolithic MP2985
- Murata D1U74T PSU
New chip support added to existing drivers:
- asus-ec-sensors: Support for ROG MAXIMUS Z790 EXTREME, ROG STRIX
B850-E GAMING WIFI, and ROG STRIX B650E-E GAMING WIFI
- dell-smm: Add Dell Latitude 7530 to fan control whitelist
- nct6683: Support for ASRock Z890 Pro-A
- pmbus: Support for Flex BMR316, BMR321, BMR350 and BMR351
- pmbus/max34440: Support for ADPM12250
- pmbus/xdp720: Support for Infineon xdp730, and fix driver issues
reported by Sashiko
New functionality:
- Add support for update_interval_us chip attribute, and support it
in ina238 driver
- Add support for guard() and scoped_guard() for subsystem locks, and
use it in adt7411, ina2xx, and lm90 drivers
- emc2305: Support configurable fan PWM at shutdown
- lm63: Expose PWM frequency and LUT hysteresis as writable
- lm75: Support active-high alert polarity
- nct7802: Add time step attributes for tweaking responsiveness
- pmbus/adm1266: Add rtc debugfs entries for rtc, powerup_counter,
clear_blackbox, and firmware_revision
- raspberrypi: Fix delayed-work teardown race, add voltage input
support as well as voltage domain IDs
- mcp9982: Add support for reporting external diode faults
Miscellaneous bug fixes, changes and improvements:
- Use named initializers for platform_device_id arrays and
i2c_device_data, and remove unused driver data
- Various drivers: Move MODULE_DEVICE_TABLE next to the table itself
- ads7871: Convert to hwmon_device_register_with_info(), and use
DMA-safe buffer for SPI writes
- adt7411: document supported sysfs attributes
- adt7462: Add of_match_table to support devicetree
- adt7475: Add explicit header include
- coretemp; Fix outdated documentation, coding style issues, and
replace hardcoded core count with dynamic value
- cros_ec: Drop unused assignment of platform_device_id driver data
- emc2305: Fix fan channel index handling
- gpd-fan: Reject EC PWM value 0 as invalid, fix race condition
between device removal and sysfs access, upgrade log level from
warn to err for platform device creation failure, initialize EC
before registering hwmon device, drop global driver data and use
per-device allocation
- htu31: document debugfs serial_number
- ina238: Add support for samples and update_interval
- it87: Clamp negative values to zero in set_fan()
- lm75: Add explicit header include, Add explicit default cases in
lm75_is_visible(), and add section for sysfs interface to
documentation
- pmbus/lm25066: Fix PMBus coefficients for LM5064/5066/5066i
- tmp102: Use device_property_read_string API
- tmp401: Read "ti,n-factor" as signed
- Convert zyxel,nsa320-mcu to DT schema"
* tag 'hwmon-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (81 commits)
hwmon: tmp401: Read "ti,n-factor" as signed
hwmon: (pmbus/lm25066) Fix PMBus coefficients for LM5064/5066/5066i
hwmon: (gpd-fan) Reject EC PWM value 0 as invalid
hwmon: (dell-smm) Add Dell Latitude 7530 to fan control whitelist
hwmon: temperature: add support for EMC1812
dt-bindings: hwmon: temperature: add support for EMC1812
hwmon: (gpd-fan): fix race condition between device removal and sysfs access
hwmon: (gpd-fan): upgrade log level from warn to err for platform device creation failure
hwmon: (gpd-fan): Initialize EC before registering hwmon device
hwmon: (gpd-fan): drop global driver data and use per-device allocation
hwmon: (pmbus/max34440): add support adpm12250
hwmon: (ina238) Add update_interval_us attribute
hwmon: Add update_interval_us chip attribute
hwmon: (ina238) Add support for samples and update_interval
gpio: gpio-ltc4283: Add support for the LTC4283 Swap Controller
hwmon: ltc4283: Add support for the LTC4283 Swap Controller
dt-bindings: hwmon: Document the LTC4283 Swap Controller
hwmon: (pmbus/xdp720) Fix driver issues xdp720/730
hwmon: (pmbus/xdp720) Add support for efuse xdp730
dt-bindings: hwmon/pmbus: Add Infineon xdp730
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull watchdog updates and fixes from Guenter Roeck:
"Subsystem:
- Unregister PM notifier on watchdog unregister
- Various documentation fixes and improvements
Removed drivers:
- Remove AMD Elan SC520 processor watchdog driver
- Drop SMARC-sAM67 support
- Remove driver for integrated WDT of ZFx86 486-based SoC
New drivers:
- Driver for Andes ATCWDT200
- Driver for Gunyah Watchdog
Added support to existing drivers:
- Add "apple,t8103-wdt" and "apple,t8122-wdt" compatibles to Apple
watchdog driver
- Add rockchip,rk3528-wdt and rockchip,rv1103b-wdt to snps,dw-wdt.yaml
- Document IPQ9650, IPQ5210, Shikra, Nord, and Hawi in qcom-wdt.yaml
Also document sram property and add support to get the bootstatus
to qcom wdt driver
- lenovo_se10_wdt: Fix use-after-rfree and add support for SE10 Gen 2
platform
- ti,rti-wdt: Add ti,am62l-rti-wdt compatible
- renesas: Document RZ/G3L support and rework example for
renesas,r9a09g057-wdt
Other bug fixes and improvements:
- Use named initializers (sc1200, ziirave_wdt)
- Allow pic32-dmt and pic32-wdt to be built with COMPILE_TEST
- realtek-otto: enable clock before using I/O, and prevent PHASE2 underflows
- rti_wdt: Add reaction control
- renesas,rzn1-wdt: Drop interrupt support and other cleanup
- gpio_wdt: Add ACPI support
- imx7ulp_wdt: Keep WDOG running until A55 enters WFI on i.MX94
- sprd_wdt: Remove redundant sprd_wdt_disable() on register failure
- bcm2835_wdt: Switch to new sys-off handler API
- sama5d4_wdt: Fix WDDIS detection on SAM9X60 and SAMA7G5
- hpwdt: Refine hpwdt message for UV platform
- Convert TS-4800 bindings to DT schema
- menz069_wdt: drop unneeded MODULE_ALIAS
- sp5100_tco: Use EFCH MMIO for newer Hygon FCH"
* tag 'watchdog-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (58 commits)
watchdog: sc1200: Drop unused assignment of pnp_device_id driver data
watchdog: unregister PM notifier on watchdog unregister
dt-bindings: watchdog: qcom-wdt: Document IPQ5210 watchdog
watchdog: dev: convert to kernel-doc comments
watchdog: core: clean up some comments
watchdog: uapi: add comments for what bit masks apply to
watchdog: linux/watchdog.h: repair kernel-doc comments
watchdog: add devm_watchdog_register_device() to watchdog-kernel-api
watchdog: ziirave_wdt: Use named initializers for struct i2c_device_id
watchdog: realtek-otto: enable clock before using I/O
watchdog: realtek-otto: prevent PHASE2 underflows
dt-bindings: watchdog: qcom-wdt: Document IPQ9650 watchdog
dt-bindings: watchdog: renesas,rzn1-wdt: interrupts are not required
dt-bindings: watchdog: apple,wdt: Add t8122 compatible
watchdog: apple: Add "apple,t8103-wdt" compatible
watchdog: rzn1: remove now obsolete interrupt support
dt-bindings: watchdog: Add watchdog compatible for RK3528
watchdog: convert the Kconfig dependency on OF_GPIO to OF
watchdog: Remove AMD Elan SC520 processor watchdog driver
watchdog: lenovo_se10_wdt: Fix use-after-free and resource leak risk
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This has been quite a busy release, mainly due to the subsystem wide
work Johan Hovold has done to modernise resource allocation for the
subsystem on probe, the subsystem did some very clever allocation
management pre devm which didn't quite mesh comfortably with managed
allocations and made it far too easy to introduce error handling and
removal bugs.
- Cleanup and simplification of controller struct allocation, moving
everything over to devm and making the devm APIs more robust, from
Johan Hovold
- Support for spi-mem devices that don't assert chip select and
support for a secondary read command for memory mapped flashes,
some commits for this are shared with mtd.
- Support for SpacemiT K1"
* tag 'spi-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (118 commits)
spi: Fix mismatched DT property access types
spi: xilinx: use FIFO occupancy register to determine buffer size
spi: spi-mem: Fix spi_controller_mem_ops kdoc
spi: xilinx: let transfers timeout in case of no IRQ
spi: dt-bindings: nuvoton,npcm750-fiu: Convert to DT schema
spi: meson-spifc: fix runtime PM leak on remove
spi: Use named initializers for platform_device_id arrays
spi: rzv2h-rspi: Add suspend/resume support
spi: dw-pci: remove redundant pci_free_irq_vectors() calls
spi: ep93xx: fix double-free of zeropage on DMA setup failure
spi: cadence-xspi: Revert COMPILE_TEST support
spi: cadence-xspi: Support 32bit and 64bit slave dma interface
spi: tegra210-quad: Allocate DMA memory for DMA engine
spi: imx: replace dmaengine_terminate_all() with dmaengine_terminate_sync()
spi: fsl-lpspi: terminate the RX channel on TX prepare failure path
spi: fsl-lpspi: replace dmaengine_terminate_all() with dmaengine_terminate_sync()
spi: atmel: fix DMA channel and bounce buffer leaks
spi: omap2-mcspi: Use of_device_get_match_data()
spi: Use named initializers for arrays of i2c_device_data
spi: aspeed: Replace VLA parameter with flat pointer in calibration helper
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The development of the regulator subsystem continues to be quite
quiet, we've got several new devices, removal of one old device and
some kernel wide cleanup of platform devices but nothing in the core.
- Cleanups of platform_device_id usage
- Filling out and fixing of the description of the MediaTek MT6359
- Removal of the PCAP regulator driver, the MFD has been removed
- New device support for Qualcomm Nord RPMH, PM8109, PM8150 and
PMAU0102, and SG Micro SGM3804"
* tag 'regulator-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (23 commits)
regulator: dt-bindings: mt6311: Convert to DT schema
regulator: qcom_smd-regulator: Add PM8019
regulator: dt-bindings: qcom,smd-rpm-regulator: Add PM8019
regulator: mt6359: Fix vbbck default internal supply name
regulator: bq257xx: drop confusing configuration of_node
regulator: Unify usage of space and comma in platform_device_id arrays
regulator: Use named initializers for platform_device_id arrays
regulator: Drop unused assignment of platform_device_id driver data
regulator: scmi: fix of_node refcount leak in scmi_regulator_probe()
regulator: remove used pcap regulator driver
regulator: add SGM3804 Dual Output driver
regulator: dt-bindings: document the SGM3804 Dual Output regulator
regulator: mt6359: Add proper ldo_vcn33_[12] regulators
regulator: mt6359: Add regulator supply names
regulator: mt6359: const-ify regulator descriptions
regulator: dt-bindings: mt6359: Deprecate bogus vcn33_[12]_* split regulators
regulator: dt-bindings: mt6359: Drop regulator-name pattern restrictions
regulator: palmas: Move MODULE_DEVICE_TABLE next to the table itself
regulator: qcom_smd: Add PM8150 regulators
regulator: dt-bindings: qcom,smd-rpm-regulator: Document PM8150 IC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing updates from Bartosz Golaszewski:
"A set of extensions to the M.2 pwrseq driver allowing it to work with
more cards than just the one from Qualcomm we supported initially.
There's also a tweak to debugfs output and a new function that will be
used by a bluetooth driver in the next cycle.
Power Sequencing core:
- Add a helper allowing consumers to access the struct device object
associated with a pwrseq provider
- Print the power sequencing device's parent in debugfs to add more
debugging information
Driver updates:
- Extend/rework the M.2 power sequencing driver in order to allow it
to support more M.2 cards, not just WCN7850"
* tag 'pwrseq-updates-for-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: pcie-m2: Add PCI ID 0x1103 for WCN6855 Bluetooth
power: sequencing: Add an API to return the pwrseq device's 'dev' pointer
power: sequencing: pcie-m2: Create BT node based on the pci_device_id[] table
power: sequencing: pcie-m2: Create serdev for PCI devices present before probe
power: sequencing: pcie-m2: Improve PCI device ID check
power: sequencing: pcie-m2: Allow creating serdev for multiple PCI devices
power: sequencing: pcie-m2: Fix inconsistent function prefixes
power: sequencing: print power sequencing device parent in debugfs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver, one legacy driver removed, a kunit test-suite
for the GPIO core, support for new models in existing drivers and a
slew of various changes in many places though I can't think of
anything controversial that would stand out - it's been a relatively
calm cycle.
GPIO core:
- Add an initial set of kunit test cases for the GPIO subsystem
- Use the devres owner as the GPIO chip's parent in absence of any
other parent
- Fix const-correctness of GPIO chip SRCU guards
- Provide new GPIO consumer interfaces: gpiod_is_single_ended() and
fwnode_gpiod_get()
- Quarantine all legacy GPIO APIs in linux/gpio/legacy.h
- Use __ro_after_init where applicable
New drivers:
- Add driver for the GPIO controller on Waveshare DSI TOUCH panels
Removed drivers:
- Remove the obsolete ts5500 GPIO driver
Driver updates:
- Modernize gpio-timberdale: remove platform data support and use
generic device property accessors
- Extend test build coverage by enabling COMPILE_TEST for more GPIO
drivers
- Add some missing dependencies in Kconfig
- Add support for sparse fixed direction to gpio-regmap
- Remove dead code from gpio-nomadik
- use BIT() in gpio-mxc
- use bitmap_complement() in gpio-xilinx and gpio-pca953x
- Use more appropriate printing functions where applicable
- Use named initializers for platform_device_id and i2c_device_id
arrays
- Convert gpio-altera to using the generic GPIO chip helper library
- Add support for new models to gpio-dwapb, gpio-zynq, gpio-usbio and
gpio-tegra186
- Unify the naming convention for Qualcomm in GPIO drivers
- Fix interrupt bank mapping to GPIO chips in gpio-mt7621
- Add support for the lines-initial-states property to gpio-74x164
- Switch to using dynamic GPIO base in gpio-ixp4xx
- Move the handling of an OF quirk from ASoC to gpiolib-of.c where
other such quirks live
- Use handle_bad_irq() in gpio-ep93xx
- Some other minor tweaks and refactorings
Devicetree bindings:
- Document the Waveshare GPIO controller for DSI TOUCH panels
- Document new models: Tegra238 in gpio-tegra186 and EIO GPIO in
gpio-zynq
- Add new properties for gpio-dwapb and fairchild,74hc595
- Fix whitespace issues
- Sort compatibles alphabetically in gpio-zynq
Documentation:
- Fix kerneldoc warnings in gpio-realtek-otto
Misc:
- Attach software nodes representing GPIO chips to the actual struct
device objects associated with them in some legacy platforms
enabling real firmware node lookup instead of string matching
- Drop unneeded dependencies on OF_GPIO from bus and staging drivers"
* tag 'gpio-updates-for-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (62 commits)
gpio: nomadik: remove dead DB8540 code from <gpio/gpio-nomadik.h>
gpio: mt7621: fix interrupt banks mapping on gpio chips
bus: ts-nbus: drop unneeded dependency on OF_GPIO
staging: media: max96712: drop unneeded dependency on OF_GPIO
gpiolib: Replace strcpy() with memcpy()
gpio: remove obsolete UAF FIXMEs from lookup paths
gpio: core: fix const-correctness of gpio_chip_guard
gpio: mxc: use BIT() macro
gpio: realtek-otto: fix kernel-doc warnings
gpio: max77620: Unify usage of space and comma in platform_device_id array
gpio: Use named initializers for platform_device_id arrays
gpio: cros-ec: Drop unused assignment of platform_device_id driver data
ARM: omap1: enable real software node lookup of GPIOs on Nokia 770
ARM: omap1: use platform_device_register_full() for GPIO devices on OMAP 16xx
ARM: omap1: drop unused variable from omap16xx_gpio_init()
gpio: gpiolib: use seq_puts() for plain strings
gpio: ts5500: remove obsolete driver
gpio: add kunit test cases for the GPIO subsystem
kunit: provide kunit_platform_device_unregister()
kunit: provide kunit_platform_device_register_full()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome-platform updates from Tzung-Bi Shih:
"Improvements:
- Use named initializers for struct i2c_device_id
Fixes:
- Fix a probe race between cros_ec_sensorhub and cros_ec_sysfs
- Check for the presence of ACPI_COMPANION() for drivers converted
from acpi_driver to platform_driver to avoid issues where
device_match_driver_override() might forcibly match the driver to
the device
- Fix a possible UAF in cros_ec_chardev
- Prevent build for big-endian systems as CHROME_PLATFORMS drivers
are only running and testing under little-endian systems
Cleanups:
- Drop some redundant bits in cros_kbd_led_backlight and Kconfig"
* tag 'chrome-platform-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: Prevent build for big-endian systems
platform/chrome: Remove superfluous dependencies from CROS_EC
platform/chrome: cros_ec_chardev: Introduce rwsem for protecting ec_dev
platform/chrome: cros_ec_chardev: Add event relayer
platform/chrome: cros_ec_chardev: Move data to chardev_pdata
platform/chrome: cros_ec_chardev: Introduce chardev_data
platform/chrome: Use named initializers for struct i2c_device_id
platform/chrome: wilco_ec: event: Check ACPI_COMPANION()
platform/chrome: chromeos_tbmc: Check ACPI_COMPANION()
platform/chrome: chromeos_privacy_screen: Check ACPI_COMPANION()
platform/chrome: cros_kbd_led_backlight: Drop CONFIG_MFD_CROS_EC_DEV ifdeffery
platform/chrome: cros_kbd_led_backlight: Pass keyboard_led as parameter
platform/chrome: cros_kbd_led_backlight: Drop max_brightness from driver data
platform/chrome: Resolve kb_wake_angle visibility race
|
|
Commit 1cea5180f2f8 ("block: remove pktcdvd driver") left behind an export
that is now dead code. Remove it and move the declaration of
scsi_device_from_queue() to drivers/scsi/scsi_priv.h.
Signed-off-by: Catalin Iacob <iacobcatalin@gmail.com>
Link: https://patch.msgid.link/20260608-remove-pktcdvd-references-v4-1-72f88b04cc87@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull in outstanding commits from 7.1 branch.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
"Preparatory work for MPAM counter assignment:
- Simplify the error handling path when creating monitor group event
configuration directories
- Make the MBM event filter configurable only on architectures that
support it and expose this with the respective file modes in the
event config
- Disallow the MBA software controller on systems where MBM counters
are assignable, as it requires continuous bandwidth measurement
that assignable counters do not guarantee
- Replace a compile-time Kconfig option for fixed counter assignment
with a per-architecture runtime property, and expose whether the
counter assignment mode is changeable to userspace
- Continue counter allocation across all domains instead of aborting
at the first failure
- Document that automatic MBM counter assignment is best effort and
may not assign counters to all domains
- Document the behavior of task ID 0 and idle tasks in the resctrl
tasks file"
* tag 'x86_cache_for_v7.2_rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Document tasks file behaviour for task id 0 and idle tasks
fs/resctrl: Document that automatic counter assignment is best effort
fs/resctrl: Continue counter allocation after failure
fs/resctrl: Add monitor property 'mbm_cntr_assign_fixed'
fs/resctrl: Disallow the software controller when MBM counters are assignable
x86,fs/resctrl: Create 'event_filter' files read only if they're not configurable
fs/resctrl: Tidy up the error path in resctrl_mkdir_event_configs()
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- Fix a malformed Kconfig default for the AMD Address Translation
Library
- Make sure i10nm loads successfully when the ADXL address decoder is
absent because former has decoding capabilities too
- Ensure error reporting is cleanly disabled on driver teardown and on
failed initialization for several legacy Intel EDAC drivers
- Fix a grammar issue in a diagnostic warning in the Sandy Bridge
driver
- Fix a missing resource release callback and incorrect memory topology
parsing in the igen6 driver, and add support for Intel Panther Lake-H
and Nova Lake-H SoCs
- Fix an out-of-bounds shift causing undefined behaviour in the Skylake
driver
- Consolidate memory controller register access helpers into shared
common code across the Intel Skylake, Ice Lake, and Meteor Lake
drivers
- Introduce sub-channel awareness and Rank Retry Logic improvements to
the Intel Skylake and i10nm drivers in preparation for Diamond Rapids
server support
- Add Rank Retry Logic support for Intel Diamond Rapids server to
imh_edac
- Make In-Band ECC detection registers configurable per SoC in the
igen6 driver
- Standardize PCI device ID table definitions across all EDAC drivers
to use named field initializers and standard PCI helper macros
* tag 'edac_updates_for_v7.2_rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/ras/ras: (22 commits)
EDAC: Consistently define pci_device_ids using named initializers
EDAC/igen6: Add Intel Nova Lake-H SoC support
EDAC/igen6: Make registers for detecting IBECC configurable
EDAC/imh: Add RRL support for Intel Diamond Rapids server
EDAC/{skx_common,i10nm}: Prepare RRL for sub-channel granularity
EDAC/skx_common: Add SubChannel support to ADXL decode
EDAC/{skx_common,i10nm}: Move RRL handling to common code
EDAC/{skx_common,i10nm}: Introduce rrl_ctrl_mode
EDAC/{skx_common,i10nm}: Rename rrl_mode to rrl_source_type
EDAC/{skx_common,skx,i10nm}: Split skx_set_decode()
EDAC/{skx_common,i10nm,imh}: Move MC register access helpers to skx_common
EDAC/{skx_common,skx}: Fix UBSAN shift-out-of-bounds in skx_get_dimm_info
EDAC/igen6: Add one Intel Panther Lake-H SoC support
EDAC/igen6: Fix memory topology parsing for Panther Lake-H SoCs
EDAC/igen6: Fix call trace due to missing release()
EDAC/sb_edac: fix grammar in sb_decode_ddr3 warning
EDAC/i5400: disable error reporting at teardown and refactor helper
EDAC/i5100: disable error reporting at teardown and create helper
EDAC/i5000: disable error reporting at teardown and refactor helper
EDAC/i7300: disable error reporting if init fails and refactor helper
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"It feels like the new world of AI tooling has slowed us down a little
on the feature side when compared to the fixes side. The extra rounds
of Sashiko review have also pushed a few things out until next time.
Still, there's some good foundational stuff here for the fpsimd code
and hardening work towards removing the predictable linear alias of
the kernel image.
CPU errata handling:
- Extend CnP disabling workaround to HiSilicon HIP09 hardware.
- Work around eternally broken broadcast TLB invalidation on more
CPUs.
- Documentation and code cleanups.
CPU features:
- Add new hwcaps for the 2025 dpISA extensions.
Floating point / SVE / SME:
- Significant cleanup to the low-level state management code in the
core architecture code and KVM.
- Use correct register widths during SVE/SME save/restore assembly.
- Expose SVE/SME save/restore memory accesses to sanitisers.
Memory management:
- Preparatory work for unmapping the kernel data and bss sections
from the linear map.
Miscellaneous:
- Inline DAIF manipulation helpers so they can be used safely from
non-instrumentable code.
- Fix handling of the 'nosmp' cmdline option to avoid marking
secondary cores as "possible".
MPAM:
- Add support for v0.1 of the MPAM architecture.
Perf:
- Update HiSilicon PMU MAINTAINERS entry.
- Fix event encodings for the DVM node in the CMN driver.
Selftests:
- Extend sigframe tests to cover POE context.
- Add coverage for the newly added 2025 dpISA hwcaps.
System registers:
- Add new registers and ESR encodings for the HDBSS feature.
Plus minor fixes and cleanups across the board"
* tag 'arm64-upstream' of gitolite.kernel.org:pub/scm/linux/kernel/git/arm64/linux: (73 commits)
arm64: errata: Mitigate TLBI errata on Microsoft Azure Cobalt 100 CPU
arm64: errata: Mitigate TLBI errata on NVIDIA Olympus CPU
arm64: errata: Mitigate TLBI errata on various Arm CPUs
arm64: cputype: Add C1-Premium definitions
arm64: cputype: Add C1-Ultra definitions
Revert "arm64: mm: Unmap kernel data/bss entirely from the linear map"
Revert "arm64: mm: Defer remap of linear alias of data/bss"
arm64: arch_timer: reuse arch_timer_read_cnt{p,v}ct_el0() helpers
arm64/mm: Rename ptdesc_t
arm64: mm: Defer remap of linear alias of data/bss
KVM: arm64: Omit tag sync on stage-2 mappings of the zero page
arm64: Avoid double evaluation of __ptep_get()
kasan: Move generic KASAN page tables out of BSS too
arm64: Rename page table BSS section to .bss..pgtbl
arm64: patching: replace min_t with min in __text_poke
perf/arm-cmn: Fix DVM node events
arm64: fpsimd: Remove <asm/fpsimdmacros.h>
arm64: fpsimd: Move SME save/restore inline
arm64: fpsimd: Move sve_flush_live() inline
arm64: fpsimd: Move SVE save/restore inline
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- Replace more deprecated functions by safer counterparts
- Switch Mac NuBus to a dynamic root device
- defconfig updates
- Miscellaneous fixes and improvements
* tag 'm68k-for-v7.2-tag1' of gitolite.kernel.org:pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Correct CONFIG_MVME16x macro name in #endif comment
m68k: hash: Use lower_16_bits() helper
m68k: defconfig: Update defconfigs for v7.1-rc1
dio: Update DIO_SCMAX comment
dio: Use tabs and avoid continuation logging in dio_init
dio: Replace deprecated strcpy with strscpy in dio_init
nubus: Switch to dynamic root device
zorro: sysfs: Replace sprintf() by sysfs_emit()
|
|
Change the below internal static functions to APIs to allow new I3C hub
driver to use them
1) i3c_dev_enable_ibi_locked()
2) i3c_dev_disable_ibi_locked()
3) i3c_dev_request_ibi_locked()
4) i3c_dev_free_ibi_locked()
5) i3c_master_reattach_i3c_dev_locked()
Signed-off-by: Aman Kumar Pandey <aman.kumarpandey@nxp.com>
Signed-off-by: Lakshay Piplani <lakshay.piplani@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260612111816.3688240-3-lakshay.piplani@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Currently sk_rethink_txhash() re-rolls the socket's txhash on RTO, PLB,
and spurious-retransmission events, but the cached route is reused and
the new hash is not propagated into the ECMP path selection logic. Two
changes are needed to make rehash select a different local ECMP path:
1. Add __sk_dst_reset() alongside sk_rethink_txhash() in
tcp_write_timeout(), tcp_rcv_spurious_retrans(), and
tcp_plb_check_rehash() so the cached dst is invalidated and the
next transmit triggers a fresh route lookup.
2. Set fl6->mp_hash from sk_txhash (or tcp_rsk(req)->txhash for
SYN/ACK retransmits and syncookies) in tcp_v6_connect(),
inet6_sk_rebuild_header(), inet6_csk_route_req(),
inet6_csk_route_socket(), tcp_v6_send_response(), and
cookie_v6_check() so fib6_select_path() picks a path based on the
new hash.
The mp_hash override only applies to fib_multipath_hash_policy 0 (the
default L3 policy). Its hash includes the flow label, but that is 0 by
default -- np->flow_label is unset, and auto_flowlabels only computes
the on-wire label later, per packet -- so flows to the same peer share
one local path. Keying the hash on sk_txhash makes the local path
per-connection and lets a rehash re-select it. Policies 1-3 are left
unchanged.
The mp_hash assignment is factored into a small helper,
ip6_ecmp_set_mp_hash(), shared by inet6_csk_route_req(),
inet6_csk_route_socket(), tcp_v6_connect(), inet6_sk_rebuild_header(),
tcp_v6_send_response(), and cookie_v6_check(). It applies
(txhash >> 1) ?: 1 for policy 0 (the >> 1 keeps mp_hash in the 31-bit
range; ?: 1 keeps it non-zero, since 0 would fall back to
rt6_multipath_hash()). inet6_csk_route_socket() calls it only for
sk_protocol == IPPROTO_TCP so that non-TCP callers (e.g., L2TP via
inet6_csk_xmit) fall through to rt6_multipath_hash() and retain their
existing flow-key-based ECMP behavior.
tcp_v6_send_response() also sets mp_hash from the response txhash so
that a control packet (a RST from the full socket, or an ACK from a
time-wait socket) selects the same local ECMP nexthop as the
connection's txhash rather than falling back to the flow hash. The
time-wait socket's tw_txhash is copied from sk_txhash when the
connection enters TIME_WAIT, so it reflects any rehash that occurred.
Setting mp_hash explicitly is necessary because the default ECMP hash
derives from fl6->flowlabel via np->flow_label, which is not updated
from sk_txhash (REPFLOW is off by default). ip6_make_flowlabel()
cannot help either, as it runs after the route lookup.
As a consequence, for policy 0 the local ECMP path of an IPv6 TCP
flow follows sk_txhash even when fl6->flowlabel is non-zero, e.g. a
reflected (REPFLOW) or explicitly set (IPV6_FLOWLABEL_MGR) flow
label. This is intentional: only local path selection changes, so
rehash can recover from a failed path; the on-wire flow label is
unchanged.
sk_set_txhash() is moved before ip6_dst_lookup_flow() in
tcp_v6_connect() so the initial ECMP path is selected by the same
txhash that subsequent route rebuilds will use. This avoids
unintended path changes when the cached dst is naturally invalidated
(e.g., by PMTU discovery or route changes).
The rehash sites (tcp_write_timeout(), tcp_plb_check_rehash(), and
tcp_rcv_spurious_retrans()) call __sk_rethink_txhash_reset_dst(),
which re-rolls the txhash and, when it changed, drops the cached dst
so the next transmit re-runs route selection. The dst reset is
guarded by sk->sk_family == AF_INET6 since IPv4 ECMP does not
currently use sk_txhash for path selection. For IPv4-mapped IPv6
sockets this produces a redundant dst reset on a cold path
(RTO/PLB); the subsequent IPv4 route lookup returns the same result.
The helper is deliberately separate from sk_rethink_txhash() itself:
dst_negative_advice() calls sk_rethink_txhash() before its own dst op,
so resetting the dst inside sk_rethink_txhash() would skip that op
(e.g. rt6_remove_exception_rt()).
For syncookies, cookie_init_sequence() computes the cookie value
before route_req() and sets txhash so the SYN-ACK selects the same
ECMP path that cookie_v6_check() will use when the full socket is
created. cookie_tcp_reqsk_init() derives txhash from the cookie so
the full socket's ECMP path matches the SYN-ACK. Both the SYN-ACK
assignment in tcp_conn_request() and the full-socket assignment in
cookie_tcp_reqsk_init() set txhash from the cookie for IPv4 and IPv6
alike. On IPv6 this drives ECMP path selection; on IPv4, which does
not use sk_txhash for ECMP, it only affects TX-queue selection. That
selection scales the hash by its high bits (reciprocal_scale()), which
are uniform in the keyed secure_tcp_syn_cookie() output -- the MSS index
only perturbs the low bits -- so the queue distribution matches
net_tx_rndhash().
cookie_init_sequence() is split from the former version that also
called tcp_synq_overflow() and incremented SYNCOOKIESSENT; those
side effects are now in cookie_record_sent(), called after
route_req() succeeds so they are not bumped when route_req() fails.
cookie_record_sent() is guarded by CONFIG_SYN_COOKIES to
match the guard on tcp_synq_overflow(). route_req() receives 0 as
tw_isn for the syncookie path so that tcp_v6_init_req() still saves
ireq->pktopts for REPFLOW flowlabel reflection and IPv6 cmsg
options. The ecn_ok clear for syncookies without timestamps stays
after tcp_ecn_create_request() so it takes precedence.
Signed-off-by: Neil Spring <ntspring@meta.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260615042158.1600746-2-ntspring@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A comment in <net/sctp/sctp.h> incorrectly refers to
CONFIG_SCTP_DBG_OBJCOUNT instead of CONFIG_SCTP_DBG_OBJCNT. Correct it.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260613233725.162470-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When recovering hugepages in the shadow MMU, verify that the base gfn of
the shadow page is actually contained within the target memslot, *before*
querying the max mapping level given the shadow page's gfn. Failure to
pre-check the validity of the gfn can lead to an out-of-bounds access to
the slot's lpage_info (which typically manifests as a host #PF because the
lpage_info is vmalloc'd) if the guest creates a hugepage mapping (in its
PTEs) that extends "below" the bounds of a memslot.
When faulting in memory for a guest, and the size of the guest mapping is
greater than KVM's (current) max mapping, then KVM will create a "direct"
shadow page (direct in that there are no gPTEs to shadow, and so the target
gfn is a direct calculation given the base gfn of the shadow page). The
hugepage recovery flow looks for such direct shadow pages, as forcing 4KiB
mappings when dirty logging generates the guest > host mapping size case.
When the 4KiB restriction is lifted, then KVM can replace the shadow page
with a hugepage.
But if KVM originally used a smaller mapping than the guest because the
range of memory covered by the guest hugepage exceeds the bounds of a
memslot, then KVM will link a direct shadow page with a gfn that is outside
the bounds of the memslot being used to fault in memory. The rmap entry
added for the leaf mapping is correct and within bounds, but the gfn of the
leaf SPTE's parent shadow page will be out of bounds.
BUG: unable to handle page fault for address: ffffc90000806ffc
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 100000067 P4D 100000067 PUD 1002a7067 PMD 10612f067 PTE 0
Oops: Oops: 0000 [#1] SMP
CPU: 13 UID: 1000 PID: 757 Comm: mmu_stress_test Not tainted 7.1.0-rc1-48ce1e26eace-x86_pir_to_irr_comments-vm #341 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_mmu_max_mapping_level+0x79/0x2b0 [kvm]
Call Trace:
<TASK>
kvm_mmu_recover_huge_pages+0x21b/0x320 [kvm]
kvm_set_memslot+0x1ee/0x590 [kvm]
kvm_set_memory_region.part.0+0x3a1/0x4d0 [kvm]
kvm_vm_ioctl+0x9bf/0x15d0 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb7/0xbb0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f21c0f1a9bf
</TASK>
Don't bother pre-checking the bounds of the potential hugepage, i.e. don't
check that e.g. sp->gfn + KVM_PAGES_PER_HPAGE(sp->role.level + 1) is also
within the memslot, as the checks performed by kvm_mmu_max_mapping_level()
are a superset of the basic bounds checks. I.e. pre-checking the full
range would be a dubious micro-optimization.
Fixes: 9eba50f8d7fc ("KVM: x86/mmu: Consult max mapping level when zapping collapsible SPTEs")
Cc: stable@vger.kernel.org
Cc: David Matlack <dmatlack@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Alexander Bulekov <bkov@amazon.com>
Cc: Fred Griffoul <fgriffo@amazon.co.uk>
Cc: Alexander Graf <graf@amazon.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Filippo Sironi <sironi@amazon.de>
Cc: Ivan Orlov <iorlov@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Implement the DSA .port_vlan_add and .port_vlan_del operations to enable
VLAN-aware bridge offloading on the NETC switch.
VLAN membership is maintained in the VLAN Filter Table (VFT). Adding the
first port to a VLAN creates a new VFT entry with hardware MAC learning
and flood-on-miss forwarding; subsequent ports update the existing
entry's membership bitmap. Removing the last port deletes the entry.
Egress tagging is handled through the Egress Treatment Table (ETT). Each
VLAN is allocated a group of ETT entries, one per available port. Ports
are assigned a sequential ett_offset during initialisation, used to
address each port's entry within the group. Untagged ports configure the
ETT to strip the outer VLAN tag; tagged ports pass frames through
unmodified. Each ETT group is optionally paired with an Egress Counter
Table (ECT) group for per-port frame counting, allocated on a best-effort
basis. When the egress rule of an ETT entry changes, the counter of the
corresponding ECT entry will be recounted to track the number of frames
that match the new egress rule.
A software shadow list serialised by vft_lock tracks active VLAN state
across both port membership and egress tagging. VID 0 is used for single
port mode and is ignored by both callbacks.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260611021458.2629145-8-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NTMP index tables require software to allocate and manage entry IDs.
Add two bitmap helper functions to facilitate this management:
ntmp_lookup_free_eid(): finds the first zero bit in the given bitmap,
sets it to mark the entry as in-use, and returns the corresponding entry
ID. Returns NTMP_NULL_ENTRY_ID if no free entry is available.
ntmp_clear_eid_bitmap(): clears the bit associated with the given entry
ID in the bitmap to mark the entry as free. It is a no-op if the entry
ID is NTMP_NULL_ENTRY_ID.
Both functions are exported for use by other modules, such as the NETC
switch driver which needs to manage group index bitmaps for the Egress
Treatment Table (ETT) and Egress Count Table (ECT).
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260611021458.2629145-7-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The Egress Treatment Table (ETT) and Egress Count Table (ECT) are both
index tables whose entry IDs are allocated by software. Every num_ports
entries form a group, where each entry in the group corresponds to one
port. To facilitate group allocation and management, initialize the group
index bitmaps for both tables based on hardware capabilities reported by
ETTCAPR and ECTCAPR registers.
The bitmap size per table is calculated as the total number of hardware
entries divided by the number of available ports, which gives the number
of groups available for software allocation. A set bit in the bitmap
represents a group index that has been allocated.
These bitmaps will be used by subsequent patches that add VLAN support.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260611021458.2629145-6-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The egress count table is a static bounded index table, egress related
statistics are maintained in this table. The table is implemented as a
linear array of entries accessed using an index (0, 1, 2, ..., n) that
uniquely identifies an entry within the array. Egress Counter Entry ID
(EC_EID) is used as an index to an entry in this table. The EC_EID is
specified in the egress treatment table.
Egress count table entries are always present and enabled. The table
only supports access via entry ID, which is assigned by the software.
And it supports Update, Query and Query followed by Update operations.
Currently, only Update operation is supported.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260611021458.2629145-5-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Each entry in the egress treatment table contains the egress packet
processing actions to be applied to a grouping or scope of packets
exiting on a particular egress port of the switch. A scope of packets,
for example, could be the packets exiting a particular VLAN, matching
a particular 802.1Q bridge forwarding entry or belonging to a stream
identified at ingress. The egress treatment table is implemented as a
linear array of entries accessed using an index (0,1, 2, ..., n) that
uniquely identifies an entry within the array.
The egress treatment table only supports access vid entry ID, which is
assigned by the software. It supports Add, Update, Delete and Query
operations. Note that only Query operation is not supported yet.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260611021458.2629145-4-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add two interfaces to manage entries in the VLAN filter table:
ntmp_vft_update_entry(): Update the configuration element data of the
specified VLAN filter entry based on the given VLAN ID. It uses the
exact key access method to locate the entry.
ntmp_vft_delete_entry(): Delete the VLAN filter entry corresponding to
the specified VLAN ID. It also uses the exact key access method to
identify the target entry.
In addition, introduce struct vft_req_qd to describe the request data
buffer format for Query and Delete actions of the VLAN filter table,
which contains a common request data header and a VLAN access key.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260611021458.2629145-3-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add three interfaces to manage dynamic entries in the FDB table:
ntmp_fdbt_update_activity_element(): Update the activity element of all
dynamic FDB entries. For each entry, if its activity flag is not set,
which means no packet has matched this entry since the last update, the
activity counter is incremented. Otherwise, both the activity flag and
activity counter are reset. The activity counter is used to track how
long an FDB entry has been inactive, which is useful for implementing
an ageing mechanism.
ntmp_fdbt_delete_ageing_entries(): Delete all dynamic FDB entries whose
activity flag is not set and whose activity counter is greater than or
equal to the specified threshold. This is used to remove stale entries
that have been inactive for too long.
ntmp_fdbt_delete_port_dynamic_entries(): Delete all dynamic FDB entries
associated with the specified switch port. This is typically called when
a port goes down or is removed from a bridge.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260611021458.2629145-2-wei.fang@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for net-next.
More specifically, this contains conncount rework to address AI related
reports, assorted Netfiter updates and two small incremental updates on
IPVS:
1) Replace old obsolete workqueues (system_wq, system_unbound_wq)
in IPVS, from Marco Crivellari.
2) Replace WARN_ON{_ONCE} by DEBUG_NET_WARN_ON_ONCE in nf_tables.
In the recent years, reporters say that the use of WARN_ON{_ONCE}
in conjunction with panic_on_warn=1 results in DoS. Let's replace
it by DEBUG_NET_WARN_ON_ONCE so this is only exercised by test
infrastructure and fuzzers, while also providing context to AI
agents. From Fernando F. Mancera.
Five patches from Florian Westphal to address AI reports in the conncount
infrastructures:
3) Fix missing rcu read lock section when calling
__ovs_ct_limit_get_zone_limit().
4) Add a dedicate lock per rbtree tree, this increases memory
usage but it should improve scalability.
5) Add a helper function to find the rbtree node, no functional
changes are intented.
6) Add sequence counter to detect concurrent tree modifications
and retry lookups.
7) Add locks to GC conncount walk and address other nitpicks.
Then, several assorted updates:
8) Defensive Tree-wide addition of NULL checks for ct extensions.
9) Bail out if flowtable bypass cannot be fully set up from the
flow offload expression, instead of lazy building a likely
incomplete one.
10) Fix documentation for the new conn_max sysctl toggle in IPVS.
11) Add nf_dev_xmit_recursion*() helpers and use them, to address
recent AI reports.
* tag 'nf-next-26-06-14' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_dup_netdev: add nf_dev_xmit_recursion*() helpers and use them
ipvs: fix doc syntax for conn_max sysctl
netfilter: flowtable: bail out if forward path cannot be discovered
netfilter: conntrack: check NULL when retrieving ct extension
netfilter: nf_conncount: gc and rcu fixes
netfilter: nf_conncount: add sequence counter to detect tree modifications
netfilter: nf_conncount: split count_tree_node rbtree walk into helper
netfilter: nf_conncount: use per nf_conncount_data spinlocks
netfilter: nf_conncount: callers must hold rcu read lock
netfilter: nf_tables: use DEBUG_NET_WARN_ON_ONCE in packet and control paths
ipvs: Replace use of system_unbound_wq with system_dfl_long_wq
====================
Link: https://patch.msgid.link/20260614114605.474783-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This adds observability for the io_uring zcrx rx-buf-len configuration.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/20260612211709.1456966-3-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v7.2
There's been quite a lot of framework improvements this time around,
though mainly cleanups and robustness rather than user visible features.
The same pattern is seen with a lot of the driver work that's going on,
there are new features but a huge proportion of this is bug fixing and
cleanup work. We also have a good selectio of new device support.
- Improvements to SDCA jack handling from Charles Keepax.
- Use of device links to make suspend handling more robust from Richard
Fitzgerald.
- Use of a new helper to factor out a common pattern in SoundWire
enmeration from Charles Keepax.
- Slimming down of the component from Kuninori Morimoto.
- Simplification of format auto selection from Kuninori Morimoto.
- Lots of conversions to guard() from Bui Duc Phuc.
- Addition of a simple-amplifier driver supporting more featureful GPIO
controller amplifiers than the previous basic driver from Herve
Codina.
- Support for AMD ACP 7.x, Cirrus Logic CS42448/CS42888, Everest Semi
ES9356, Mediatek MT2701 and MT8196, Renesas RZ/G3E, Spacemit K3,
Texas Instruments TAC5xx2 and TAS67524.
|
|
The former s390 specific arch_cpu_idle_time() implementation was
removed, since its implementation was racy and reported idle time
could go backwards [1].
However this removal was not necessary, since independently of the s390
architecture specific races there exists the iowait counter update race,
which can also lead to reported idle time going backwards [2].
With Frederic Weisbecker's recent cpu idle time accounting refactoring
kernel_cpustat got a sequence counter. Use this to implement s390 specific
variants of kcpustat_field_idle() and kcpustat_field_iowait(). This is
logically a revert of [1] and moves cpu idle time accounting back into s390
architecture code, which is also more precise than the dyntick idle time
accounting by nohz/scheduler.
For comparing cross cpu time stamps it is necessary to use the stcke
instead of the stckf instruction in irq entry path. Furthermore this
open-codes a sequence lock in assembler and C code, which is required to
update the irq entry time stamp to the per cpu idle_data structure in a
race free manner.
[1] commit be76ea614460 ("s390/idle: remove arch_cpu_idle_time() and corresponding code")
[2] commit ead70b752373 ("timers/nohz: Add a comment about broken iowait counter update race")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
|
|
KVM/riscv changes for 7.2
- Batch G-stage TLB flushes for GPA range based page table updates
- Convert HGEI line management to fully per-HART
- Fix missing CSR dirty marking when FWFT state updated via ONE_REG
- Fix stale FWFT feature exposure to Guest/VM
- Speed up dirty logging write faults using MMU rwlock and atomic
PTE updates using cmpxchg() for permission-only changes
- Use flexible array for APLIC IRQ state
- Use kvm_slot_dirty_track_enabled() for logging enable check on
a memslot
- Avoid skipping valid pages in kvm_riscv_gstage_wp_range()
- Avoid skipping valid pages in kvm_riscv_gstage_unmap_range()
- Use endian-specific __lelong for NACL shared memory
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: New features for 7.2
New features for 7.2 for KVM/s390:
* KVM_PRE_FAULT_MEMORY support
* Support for 2G hugepages
* Support for the ASTFLEIE 2 facility
* kvm_arch_set_irq_inatomic Fast Inject
* Fix potential leak of uninitialized bytes
|
