| Age | Commit message (Collapse) | Author |
|---|
|
smp_call_function_any() disables preemption across the entire operation:
selecting a target CPU, enqueueing the IPI, and synchronously waiting for
the remote CPU. smp_call_function_single() already re-enables preemption
before the synchronous csd_lock_wait(), so callers of
smp_call_function_any() should benefit from the same shorter
preemption-disabled section.
Simply removing get_cpu() and put_cpu() from smp_call_function_any()
would leave the preemption disablement entirely to
smp_call_function_single(). That opens a preemption window between
selecting the remote CPU, for example via sched_numa_find_nth_cpu(), and
dispatching the IPI in smp_call_function_single(). If the selected CPU is
fully offlined in that window, smp_call_function_single() fails its
cpu_online() check and returns -ENXIO to the caller, violating the
guarantee that smp_call_function_any() executes on any online CPU in the
mask.
Move the remote CPU selection into a common
__smp_call_function_single() helper. Keep the target CPU selection and
IPI dispatch within the same preemption-disabled region, while still
allowing the wait path to use the shorter preemption-disabled section
provided by smp_call_function_single().
Signed-off-by: Chuyi Zhou <zhouchuyi@bytedance.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260709122933.4021501-4-zhouchuyi@bytedance.com
|
|
Following the sale of PEAK-System France by HMS-Networks, this update is
intended to change all my @hms-networks.com email addresses to my new
@peak-system.fr address.
Signed-off-by: Stéphane Grosjean <s.grosjean@peak-system.fr>
Link: https://patch.msgid.link/20260410124251.40506-1-stephane.grosjean@free.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This is needed by rust/helpers/srcu.c which now adds
rust_helper_srcu_readers_active() as a wrapper around the SRCU helper
for Rust callers.
To achive this:
1- Move the srcu_readers_active() implementation from
"kernel/rcu/srcutree.c" to "include/linux/srcutree.h".
2- Implement a matching srcu_readers_active() in
"include/linux/srcutiny.h" and use it on the existing open-coded
WARN_ON() check in cleanup_srcu_struct().
Signed-off-by: Onur Özkan <work@onurozkan.dev>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Restructure the SRCU initialization functions so it always follows
one direction:
init_srcu_struct() -> __init_srcu_struct() -> lockdep or generic
This uses the same wrapper style as mutex. It avoids the old confusing
style where init_srcu_struct() and __init_srcu_struct() called each
other in different configs. It also helps Rust side to have simpler
helper for SRCU initialization.
Signed-off-by: Onur Özkan <work@onurozkan.dev>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
HEAD
Merge Glymur clock controller binding from topic branch to get access to
constants.
|
|
'20260608-shikra-gcc-rpmcc-clks-v5-2-94cefe092ee3@oss.qualcomm.com' into HEAD
Merge Shikra RPM and global clock controller bindings from topic branch
to get access to the various constants.
|
|
For rproc that doing attach, rproc_start_subdevices() is called only when
attach successfully. If rproc_report_crash() is called in the attach
function, rproc_boot_recovery()->rproc_stop()->rproc_stop_subdevices()->
glink_subdev_stop() could be called and cause NULL pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000300
Mem abort info:
...
pc : qcom_glink_smem_unregister+0x14/0x48 [qcom_glink_smem]
lr : glink_subdev_stop+0x1c/0x30 [qcom_common]
...
Call trace:
qcom_glink_smem_unregister+0x14/0x48 [qcom_glink_smem] (P)
glink_subdev_stop+0x1c/0x30 [qcom_common]
rproc_stop+0x58/0x17c
rproc_trigger_recovery+0xb0/0x150
rproc_crash_handler_work+0xa4/0xc4
process_scheduled_works+0x18c/0x2d8
worker_thread+0x144/0x280
kthread+0x124/0x138
ret_from_fork+0x10/0x20
Code: a9be7bfd 910003fd a90153f3 aa0003f3 (b9430000)
---[ end trace 0000000000000000 ]---
Introduce "subdevs_started" flag to indicate rproc_start_subdevices() has
been called successfully. Ensure subdevices are only stopped if they have
been started.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260623-rproc-attach-issue-v3-2-8e24310707ce@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
schedule_work()
Unlike the remoteproc firmware load path where rproc_add() call
rproc_auto_boot_callback() asynchronously and ignores the return value of
rproc_boot(), the attach path calls rproc_boot() synchronously and
propagates its return value back to rproc_add(). This means a failure
during rproc_attach() causes rproc_add() to fail and triggers resource
release, removing the remoteproc from sysfs and making it unavailable for
recovery or further boot attempts.
Align the remoteproc attach path with the firmware load path by
introducing attach_work and scheduling rproc_boot() asynchronously via
schedule_work(). This keeps the remoteproc registered and available in
sysfs even if the initial attach attempt fails, and avoids blocking
rproc_add() on the attach result.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260623-rproc-attach-issue-v3-1-8e24310707ce@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Newer VMD with device ID 0x28C1 has unique settings compared to its
predecessor where BIOS enumerates the entire VMD device tree and assigns
respective configurations.
VMD configuration BAR0 carries over from GNR legacy VMD as the mechanism
to access the configuration space of the devices owned by VMD. The size
of this window is fixed at 256 MB, where each function consumes 4 KB and
every bus consumes 1 MB.
The shadow and scratchpad registers have been relocated from the VMD
configuration space to the VMD MMIO space in VMD BAR4/BAR5, otherwise
refers to as MEMBAR2 or MSI-X bar.
VMD MSI-X remapping enable/disable is no longer supported.
On this new device, simply obtain the bus hide range and shadow register
values set by BIOS and perform a bus scan.
Also refactor vmd_enable_domain().
Signed-off-by: Nirmal Patel <nirmal.patel@linux.intel.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/20260629165025.268836-1-nirmal.patel@linux.intel.com
|
|
Provide three new kunit-managed helpers for test cases that need to
register/create dynamic software nodes.
Reviewed-by: David Gow <david@davidgow.net>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260713-swnode-fw-devlink-v4-1-d4f2dee27ad9@oss.qualcomm.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
In some cases, the processor may not actually stick to the "desired"
performance level programmed through the driver's .adjust_perf()
callback and may go above it, which may not be desirable (for instance,
there may be a UCLAMP_MAX limit set for the task currently running on
the given CPU which should be respected).
Address that by adjusting the .adjust_perf() callback to take an
additional argument, max_perf, representing the maximum allowed
performance level of the CPU and update the intel_pstate driver to
take that argument into account as appropriate.
Accordingly, adjust cpufreq_driver_adjust_perf() and the other existing
user of .adjust_perf(), which is the amd-pstate driver (but the behavior
of that driver is not changed).
While at it, also update the cpufreq_driver_adjust_perf()
documentation to reflect this change and some previous code
changes that have not been taken into account in it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Zhongqiu Han <zhongqiu.han@oss.qualcomm.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/6277654.lOV4Wx5bFT@rafael.j.wysocki
[ rjw: Adjusted Rust function formatting ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Move the function documentation for vb2_querybuf() from videobuf2-v4l2.c
to videobuf2-v4l2.h to match other functions.
Leaving the comment in the source file prevents the kernel-doc parser
from extracting it - thus become missing from the generated HTML.
Additionally, format the comment block to be the same style as other
functions in the header.
Signed-off-by: Tharit Tangkijwanichakul <tharitt97@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
Some pci_device_id arrays already used the PCI_DEVICE macros, others
used named initializers or list initializers. Unify all to use the
PCI_DEVICE macros and (if applicable) a named initializer for
.driver_data. Also drop all zeros that the compiler can care for and
unify indention and spacing.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
|
|
a5b98009f16d ("sched/psi: fix race between file release and pressure write")
made pressure_write() hold cgroup_mutex across psi_trigger_create(), which
forks the psimon kthread for the first rtpoll trigger. As kthread creation
depends on the whole fork path, the commit inadvertently created a lot of
unwanted locking dependencies from cgroup_mutex.
sched_ext got hit by one: its enable path blocks forks and then grabs
cgroup_mutex, so a pressure write racing a scheduler enable deadlocks, with
every other fork piling up behind.
Fix it by splitting trigger creation so that the worker is forked with
cgroup_mutex dropped and the kernfs active reference left broken. The latter
matters because rmdir and cgroup.pressure writes drain active references
under cgroup_mutex. Publishing the trigger last keeps error reporting
synchronous and preserves the of->priv lifetime rules.
The trigger registered in the first stage pins the group's rtpoll machinery
across the unlocked window, leaving only creation races to resolve. The
catch-up poll on installation covers scheduling attempts dropped while there
was no worker.
v2: Retagged sched/psi (was cgroup).
Fixes: a5b98009f16d ("sched/psi: fix race between file release and pressure write")
Cc: stable@vger.kernel.org
Cc: Edward Adam Davis <eadavis@qq.com>
Cc: Chen Ridong <chenridong@huaweicloud.com>
Reported-by: Matt Fleming <mfleming@cloudflare.com>
Closes: https://lore.kernel.org/all/20260710100441.2653477-1-matt@readmodwrite.com/
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Matt Fleming <mfleming@cloudflare.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
|
|
The Lenovo Legion 5 15ARH05 (Renoir) ships a BOE 0x08DF eDP panel that
advertises AUX/DPCD backlight control, so amdgpu's automatic detection
(amdgpu_backlight == -1) selects AUX. On this panel the AUX backlight
path has no effect: brightness writes are accepted but the panel level
never changes, the display is stuck at a fixed brightness and
max_brightness is reported as a bogus 511000. As a result neither the
desktop brightness slider nor the brightness hotkeys do anything.
Forcing PWM backlight (amdgpu.backlight=0) restores working control:
max_brightness becomes 65535 and the level tracks writes. This has long
been applied by users as a manual kernel-parameter workaround.
Extend the generic panel backlight quirk with a force_pwm flag, add an
entry for the Legion 5 15ARH05 / BOE 0x08DF panel, and have amdgpu
disable AUX backlight (use PWM) when the quirk matches and the user
lets the driver auto-select the backlight type.
Signed-off-by: Alessandro Rinaldi <ale@alerinaldi.it>
Tested-by: Alessandro Rinaldi <ale@alerinaldi.it>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Thestate CPUHP_AP_ARM_CORESIGHT_CTI_STARTING has become unused since commit
59213b4be5c1 ("coresight: cti: Remove CPU power management code").
Remove it as well.
Signed-off-by: Zenghui Yu <zenghui.yu@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260711135154.94276-1-zenghui.yu@linux.dev
|
|
The header define in asm/timex,h and the naming of the function to read the
delay timer are confusing at best.
Convert it to a config switch selected by the archictures which provide the
functionality and rename the function to delay_read_timer(), which makes
the purpose clear. Move the declaration to linux/delay.h where it belongs.
Remove the resulting empty asm/timex.h files as well.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260410120317.978403520@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 7.2, take #2
- Move locking for kvm_io_bus_get_dev() into the caller, ensuring
race-free checks that the returned object is of the correct type
- Fix initialisation of the page-table walk level when relaxing
permissions
- Correctly update the XN attribute when relaxing permissions
- Fix the sign extension of loads from emulated MMIO regions
- Assorted collection of fixes for pKVM's FFA proxy, together with a
couple of FFA driver adjustments
|
|
tcp_bpf_ioctl() answers SIOCINQ from psock->msg_tot_len, which only
counts bytes in ingress_msg. Without a stream/skb verdict program
nothing is diverted there: data stays in sk_receive_queue, so FIONREAD
returns 0 even though read() returns data.
Add tcp_inq() to the reported value when the psock has no verdict
program. The two queues are disjoint, so bytes redirected into
ingress_msg from other sockets stay correctly accounted through
msg_tot_len.
Remove unused sk_psock_msg_inq().
Fixes: 929e30f93125 ("bpf, sockmap: Fix FIONREAD for sockmap")
Signed-off-by: Mattia Meleleo <mattia.meleleo@coralogix.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20260708-fionread-no-verdict-v3-1-b4ee31b3af53@coralogix.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Helper and kfunc argument checking carried two separate meta structs: the
verifier-local struct bpf_call_arg_meta and bpf_kfunc_call_arg_meta.
Merge them into a single struct bpf_call_arg_meta. This is groundwork for
sharing argument checking between helpers and kfuncs.
While merging, drop the btf_id field from the helper meta since it is
never used.
No functional change.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260715064047.1793790-8-ameryhung@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
The constant "size of the PTR_TO_MEM returned in R0" argument is handled by
both helpers (ARG_CONST_ALLOC_SIZE_OR_ZERO) and kfuncs (__rdonly_buf_size /
__rdwr_buf_size), each with its own meta field (meta->mem_size,
meta->r0_size) and duplicated validation. Add struct arg_alloc_mem_desc
and a shared process_const_alloc_mem_size(), and replace both fields with
meta->arg_alloc_mem.
The desc records presence with a 'found' flag instead of using a non-zero
size as the sentinel. This also fixes a pre-existing bug on the kfunc
return path: "no size argument" was tested as r0_size == 0, so an explicit
__rdonly_buf_size/__rdwr_buf_size of 0 was treated as absent and fell
through to btf_resolve_size(), giving R0 the size of the pointed-to return
type instead of 0. With 'found', an explicit zero size is honored and
btf_resolve_size() is used only when no size argument was passed.
The size is stored in a u32, matching regs[R0].mem_size. The U32_MAX
check now apply to both helper and kfunc through
process_const_alloc_mem_size().
Fold bpf_session_cookie return size assignment into current kfunc return
size resolution path.
Note that verifier saves kfunc return size through r0_size instead of
mem_size. The later has no active readers so remove it.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260715064047.1793790-5-ameryhung@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
To prepare for unifying the helper and kfunc call_arg_meta, group the
scattered MEM_UNINIT ("raw") memory argument fields (raw_mode, regno and
access_size) into a new struct arg_raw_mem_desc. The intention is to
make it clear about when these are set and used instead of fields with
overly generic names.
Identify the raw argument once, up front, in check_raw_mode_ok() (like
check_proto_release_reg() does for release_regno), recording its regno.
check_stack_range_initialized() now recognizes the raw buffer by matching
that regno, so the separate raw_mode flag is no longer needed, and the
per-argument "meta->raw_mode = arg_type & MEM_UNINIT" assignments in
check_func_arg() go away with it.
A raw memory argument can be tagged either ARG_PTR_TO_MEM | MEM_UNINIT or
ARG_PTR_TO_MAP_VALUE | MEM_UNINIT (the output buffer of bpf_map_pop_elem()
and bpf_map_peek_elem()). Either may be passed as a PTR_TO_STACK, which
reaches check_stack_range_initialized() through check_helper_mem_access(),
so both must be treated as raw. Extend arg_type_is_raw_mem() to match the
map value case as well; otherwise check_raw_mode_ok() would not record the
regno for it and an uninitialized stack buffer passed to those helpers
would be wrongly rejected for programs without CAP_PERFMON.
No functional change intended. This patch does not enable raw_mode
memory access for kfunc (i.e., uninit stack will not be allowed to be
passed to kfunc for unprivileged programs). Existing kfuncs with arguments
tagged with __uninit are either priviledged or dynptr kfuncs, which take
another path to make sure the access is checked by check_mem_access().
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260715064047.1793790-3-ameryhung@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
BPF_RB_OVERWRITE_POS is supported by bpf_ringbuf_query() but was missing
from the helper documentation. Add it to the flags list in both the
kernel UAPI header and its tools/ mirror.
Signed-off-by: Jianlin Shi <shijianlin11@foxmail.com>
Acked-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/bpf/tencent_22134645443B75ED907D2A85A47AD554A709@qq.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
BPF_FIB_LOOKUP_VLAN resolves a VLAN egress. The reverse is also
useful: an XDP program receiving a VLAN-tagged frame on a physical
device wants the lookup to behave as if the packet had arrived on the
corresponding VLAN subinterface, so iif-based policy routing and VRF
table selection use the right ingress.
Add BPF_FIB_LOOKUP_VLAN_INPUT. When set, params->h_vlan_proto and
params->h_vlan_TCI are read as an input VLAN tag and the matching VLAN
device of params->ifindex is resolved with __vlan_find_dev_deep_rcu().
The device must be up and in the same network namespace as
params->ifindex (a VLAN device can be moved to another netns while
registered on its parent; receive would deliver into that other
namespace, which a lookup here cannot represent). If params->ifindex
is itself a VLAN device, its inner (QinQ) subinterface is matched.
For a bond or team, a tag on a port matches no device and returns
NOT_FWDED; pass the master's ifindex.
The lookup then runs with the resolved device as the ingress;
params->ifindex itself is not modified on the input side. When the
resolved device is enslaved to a VRF, both the full lookup (via the
l3mdev rule) and BPF_FIB_LOOKUP_DIRECT (via l3mdev_fib_table_rcu())
select the VRF's table from the resolved ingress. That follows from
feeding the resolved device to the flow as the ingress
(fl4.flowi4_iif = dev->ifindex), which is what makes l3mdev resolve
the VRF master from the subinterface rather than from
params->ifindex.
The two failure classes get different treatment on purpose. A
h_vlan_proto other than 802.1Q/802.1ad is API misuse and returns
-EINVAL, since it would otherwise reach the WARN in vlan_proto_idx()
with a program-controlled value. An unmatched VID, a device that is
down, or one in another namespace is a data outcome and returns
BPF_FIB_LKUP_RET_NOT_FWDED, matching the DIRECT path when
fib_get_table() finds no table and mirroring real ingress, where the
receive path drops such frames. A VID of 0 (a priority tag) is looked
up literally and normally fails the same way; receive instead
processes such frames untagged, so callers should not set the flag for
priority tags. Proceeding on the physical device for any of these
would be fail-open for the policy-routing cases above.
The h_vlan fields share a union with tbid, so the flag cannot be
combined with BPF_FIB_LOOKUP_TBID. It describes ingress, so it also
cannot be combined with BPF_FIB_LOOKUP_OUTPUT. Both combinations
return -EINVAL; restricting now keeps a later relaxation backward
compatible. Combining with BPF_FIB_LOOKUP_VLAN is allowed: the tag is
consumed on the ingress side and the egress tag is written on
success.
Under !CONFIG_VLAN_8021Q the __vlan_find_dev_deep_rcu() stub returns
NULL, so every lookup with a valid proto returns NOT_FWDED, which is
correct since no VLAN device can exist.
Suggested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Avinash Duduskar <avinash.duduskar@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/bpf/20260713162305.1237211-3-avinash.duduskar@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
bpf_fib_lookup() returns the FIB-resolved egress ifindex straight
from the fib result. When the egress is a VLAN device, the returned
ifindex is the VLAN netdev's, which has no XDP xmit handler; XDP
programs that want to forward the frame (e.g. xdp-forward) must
instead target the underlying physical device and push the VLAN tag
themselves. Today the program has no way to learn either the
underlying ifindex or the VLAN tag without maintaining its own
VLAN-to-ifindex map in userspace and refreshing it on netlink
events.
Add BPF_FIB_LOOKUP_VLAN. When the caller sets this flag and the fib
result is a VLAN device whose immediate parent is a real (non-VLAN)
device in the same network namespace, populate the existing output
fields params->h_vlan_proto and params->h_vlan_TCI from the VLAN
device and replace params->ifindex with the parent's ifindex.
params->h_vlan_TCI carries the VID only, with PCP and DEI bits zero; a
consumer wanting to set egress priority writes PCP itself.
params->smac is the VLAN device's own address, which can differ from
the parent's.
Only the immediate parent is resolved, via vlan_dev_priv(dev)->real_dev
and not vlan_dev_real_dev(), which walks to the bottom of a stack. When
the immediate parent is not a real device in the same namespace, the
lookup returns BPF_FIB_LKUP_RET_VLAN_FAILURE and leaves params->ifindex
at the input. This covers a stacked VLAN (QinQ), where the immediate
parent is itself a VLAN device and one h_vlan_proto/h_vlan_TCI pair
cannot describe two tags, and a parent in another network namespace (a
VLAN device can be moved while its parent stays), whose ifindex would
be meaningless in the caller's namespace. A program that wants the
VLAN device's own ifindex re-issues the lookup, with a re-initialized
params, without BPF_FIB_LOOKUP_VLAN, so the unreducible case stays
distinct from a physical egress. That distinction matters for XDP: a
program cannot xmit on a VLAN device, so a success carrying the VLAN
ifindex would make it redirect to a device with no ndo_xdp_xmit and
drop the frame at xdp_do_flush(). The swap and the vlan fields are
written only on the reduce path; other output fields keep their
existing behaviour, so a frag-needed result still reports the route
mtu in params->mtu_result.
BPF_FIB_LOOKUP_VLAN is only useful to XDP, which cannot redirect to a
VLAN device. A tc program can redirect to the VLAN device directly, so
bpf_skb_fib_lookup() rejects the flag with -EINVAL; bpf_xdp_fib_lookup()
accepts it. When the flag is not set, behaviour is unchanged:
h_vlan_proto and h_vlan_TCI are zeroed and ifindex is left at the FIB
result.
The new block is compiled only under CONFIG_VLAN_8021Q since
vlan_dev_priv() is not defined otherwise; without that config
is_vlan_dev() is constant false and the flag is accepted but never
acts. That is safe because no VLAN device can exist there, so every
egress is already physical.
This lets an XDP redirect target the physical device and learn the
tag to push in a single lookup, which xdp-forward's optional VLAN
mode (xdp-project/xdp-tools#504) wants from the kernel side.
The helper's input semantics are unchanged; the reverse direction
(supplying a tag as lookup input) is added in the following patch.
Suggested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Avinash Duduskar <avinash.duduskar@gmail.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/bpf/20260713162305.1237211-2-avinash.duduskar@gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Over time the meaning of HAVE_GENERIC_VDSO has become off.
Today it only controls the availability of the vDSO datastore.
Rename the symbol to match its function.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@oss.qualcomm.com>
Link: https://patch.msgid.link/20260709-vdso-have_generic_vdso-v1-6-d2e1061f268b@linutronix.de
|
|
All bridge drivers have been converted to the atomic variants of the
enable, disable, pre_enable, and post_disable callbacks.
Remove the deprecated legacy hooks from drm_bridge_funcs, the
drm_bridge_is_atomic() helper that was only needed to distinguish
between atomic and non-atomic bridges, and the legacy bridge test
cases.
Since all bridges are now atomic, unconditionally initialize the
private object state at attach time.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260707-drm-all-atomic-bridges-v2-37-21d03cbca446@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The GPIO_LOOKUP_SINGLE() macro defines a lookup table with a single entry
followed by an empty sentinel entry. The sentinel entry has a trailing
comma which is unnecessary. Remove it.
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/alV0wIgZAY_InGYV@google.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
container_of() can be called in a nested manner to retrieve the grand
parent structure as illustrated below:
struct foo {
int a;
};
struct bar {
struct foo foo;
};
#define to_foo(a_ptr) container_of(a_ptr, struct foo, a)
#define to_bar(a_ptr) container_of(to_foo(a_ptr), struct bar, foo)
The issue is that the above construct will cause __mptr, the local
variable of container_of(), to shadow itself because of the nested
call. This then triggers a warning in sparse and W=2 builds.
While this warning is benign, it still causes some overhead as proven by
below list of commits in which people made local workarounds:
- commit 7eab14de73a8 ("mdio, phy: fix -Wshadow warnings triggered by
nested container_of()")
- commit 8d8c3131248d ("clk: define to_clk_regmap() as inline
function")
- commit bfb972c5e1cb ("IB/verbs: avoid nested container_of()")
- commit 093adbcedf12 ("btrfs: switch helper macros to static inlines
in sysfs.h")
- commit c1d35dfa0f7d ("rt2x00: Fix sparse warning on nested
container_of()")
(the list is probably not exhaustive).
As a matter of fact, the local variable __mptr is only used once in
container_of(). As such, it is not strictly needed. Inline that local
__mptr variable to remove once and for all the risk of variable
shadowing when nesting container_of() and prevent people from writing
further local fixes.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20260714-containerof_refactor-v1-3-b5c31164d2ad@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The last expression in container_of() doesn't need an extra pair of
parenthesis. Remove it.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20260714-containerof_refactor-v1-2-b5c31164d2ad@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
container_of() uses the construct below:
((type *)0)->member
to retrieve the type of the structure's member and then ensure that it
matches the type of the given pointer.
This construct being rather difficult to understand, the typeof_member()
macro was created to encapsulate it and give it a descriptive name.
Apply typeof_member() to container_of() to make it easier to read and
understand what this macro does.
Signed-off-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20260714-containerof_refactor-v1-1-b5c31164d2ad@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Define INTEL_SIP_SMC_STATUS_NO_RESPONSE (0x3) and handle it in
stratix10_svc_async_poll() the same way as INTEL_SIP_SMC_STATUS_BUSY,
returning -EAGAIN so callers can retry instead of treating the poll as
a hard failure.
When the Secure Device Manager has not yet produced a response for an
asynchronous transaction, ATF is expected to return
INTEL_SIP_SMC_STATUS_NO_RESPONSE. Without this handling, the service
layer maps the status to -EINVAL and async clients cannot distinguish
"not ready yet" from a real error.
Fixes: bcb9f4f07061 ("firmware: stratix10-svc: Add support for async communication")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Ng Ho Yin <adrian.ho.yin.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
A Get or Set Feature payload larger than the mailbox payload size is
split into several mailbox commands. mbox_mutex only serializes
individual mailbox commands and is dropped between iterations of these
loops. Nothing serializes the multi-part transfer as a whole.
cxl_get_feature() and cxl_set_feature() are reachable concurrently
from fwctl (per-fd RPCs run under a read-held registration lock) and
from the EDAC scrub/ECS/repair paths, so two transfers to the same
mailbox can interleave their parts and corrupt the device's transfer
context.
Add a per-mailbox feat_mutex and hold it across the whole transfer in
both functions. It nests outside mbox_mutex (which is taken inside
cxl_internal_send_cmd()), and is taken nowhere else, so no lock-ordering
inversion is introduced.
Link: https://sashiko.dev/#/patchset/20260702090849.47501-1-icheng@nvidia.com?part=1
Fixes: 5e5ac21f629d ("cxl/mbox: Add GET_FEATURE mailbox command")
Fixes: 14d502cc2718 ("cxl/mbox: Add SET_FEATURE mailbox command")
Assisted-by: Claude:claude-opus-4-8
Reviewed-by: Richard Cheng <icheng@nvidia.com>
Link: https://patch.msgid.link/20260709155841.1895915-1-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
drm_for_each_bridge_in_chain()
drm_for_each_bridge_in_chain_scoped() was added in commit e46efc6a7d28
("drm/bridge: add drm_for_each_bridge_in_chain_scoped()") to provide a
safer alternative to drm_for_each_bridge_in_chain().
Following commits converted all users to the _scoped variant.
Finally commit 2f08387a444c ("drm/bridge: remove
drm_for_each_bridge_in_chain()") removed the old
drm_for_each_bridge_in_chain() macro.
It's time to rename drm_for_each_bridge_in_chain_scoped() back to the
original name.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patch.msgid.link/20260630-drm-bridge-alloc-getput-for_each_bridge-2-v2-1-e0a1094cd1eb@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Commit 280ea9c3154b ("mm/slab: avoid allocating slabobj_ext array from
its own slab") avoided recursive allocation of obj_exts from kmalloc
caches of the same size, by bumping the obj_exts array's allocation
size whenever the array size equals the size of the object being
allocated.
However, as reported by Danielle Costantino and Shakeel Butt,
even slabs from kmalloc caches of different sizes can form a cycle
by allocating obj_exts arrays from each other [1]:
What happened: a KMALLOC_NORMAL slab's obj_exts array (used by
allocation profiling / memcg accounting) is itself kmalloc()'d from a
KMALLOC_NORMAL cache, so the "slab holds another slab's obj_exts array"
relation can form cycles. With sizeof(struct slabobj_ext) == 16 and
the host's geometry:
- kmalloc-512 has 64 objects/slab -> array is 64*16 == 1024 bytes,
served from kmalloc-1k;
- kmalloc-1k has 32 objects/slab -> array is 32*16 == 512 bytes,
served from kmalloc-512.
A kmalloc-512 slab and a kmalloc-1k slab therefore hold each other's
obj_exts array. Discarding one frees the other's array, which empties
and discards that slab, which frees the first's array, and so on:
__free_slab() -> free_slab_obj_exts() -> kfree() -> discard_slab() ->
__free_slab() recurses along the cycle until the stack is exhausted.
With memory allocation profiling, this allows unbounded recursion
in the free path and led to a stack overflow on a production host in
the Meta fleet [1]:
BUG: TASK stack guard page was hit
Oops: stack guard page
RIP: 0010:kfree+0x8/0x5d0
Call Trace:
__free_slab+0x66/0xc0
kfree+0x3f0/0x5d0
... ( ~125x __free_slab <-> kfree ) ...
<kernel driver freeing a resource>
do_syscall_64
It is proposed [1] to resolve this issue by always serving the obj_exts
array allocation from kmalloc caches (or large kmalloc) of sizes larger
than the object size. However, as pointed out by Vlastimil Babka [2],
this can waste an excessive amount of memory as slabs from large
kmalloc sizes (e.g. kmalloc-8k) generally need obj_exts arrays much
smaller than the object size.
Therefore, rather than bumping the size, let us take a different
approach; disallow formation of cycles between kmalloc types when
allocating obj_exts arrays. Currently, all obj_exts arrays are served
from normal kmalloc caches. Cycles cannot be created if obj_exts arrays
of normal kmalloc caches are served from a special kmalloc type that can
never have obj_exts arrays.
To achieve this, create a new kmalloc type called KMALLOC_NO_OBJ_EXT.
KMALLOC_NO_OBJ_EXT caches are created with SLAB_NO_OBJ_EXT flag when
either 1) memory allocation profiling is not permanently disabled,
or 2) kmalloc types with a priority higher than KMALLOC_CGROUP are
aliased with KMALLOC_NORMAL.
Sheaf bootstrapping for KMALLOC_NO_OBJ_EXT caches now must be deferred
because allocation of a barn can trigger obj_exts array allocation of
normal kmalloc caches when the KMALLOC_NO_OBJ_EXT cache for that size
is not ready yet. For simplicity, perform bootstrapping of sheaves for
all kmalloc caches later.
Introduce a new slab alloc flag, SLAB_ALLOC_NO_OBJ_EXT, to prevent
allocation of obj_exts arrays, and let kmalloc_slab() override the type
to KMALLOC_NO_OBJ_EXT when specified. Note that kmalloc_type() remains
unchanged because kmalloc_flags() bypasses the kmalloc fastpath.
Do not pass SLAB_ALLOC_NO_RECURSE to kmalloc_flags() in
alloc_slab_obj_exts() and instead use SLAB_ALLOC_NO_OBJ_EXT only when
the objects are allocated from normal kmalloc caches. While this
prevents unbounded recursive allocation of obj_exts, it allows
KMALLOC_NO_OBJ_EXT caches to have sheaves.
Since sheaf allocations specify SLAB_ALLOC_NO_RECURSE that prevents
allocation of both sheaves and obj_exts arrays, the recursion depth
is bounded.
obj_exts arrays for non-kmalloc-normal caches can now have a valid tag.
Do not call mark_obj_codetag_empty() when freeing an obj_exts array to
avoid false warnings. KMALLOC_NO_OBJ_EXT don't need this as they never
allocate those arrays.
Reported-by: Danielle Costantino <dcostantino@meta.com>
Reported-by: Shakeel Butt <shakeel.butt@linux.dev>
Closes: https://lore.kernel.org/linux-mm/20260625230029.703750-1-shakeel.butt@linux.dev [1]
Fixes: 4b8736964640 ("mm/slab: add allocation accounting into slab allocation and free paths")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mm/c5c4208d-a6f0-413e-bad9-49be12f12d55@kernel.org [2]
Signed-off-by: Harry Yoo (Oracle) <harry@kernel.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Link: https://patch.msgid.link/20260713-kmalloc-no-objext-v3-4-47c7bd138de7@kernel.org
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
|
|
Now that devices under noiommu mode can bind with IOMMUFD and perform
IOAS operations, lift restrictions on cdev from VFIO side.
Use cases are documented in Documentation/driver-api/vfio.rst
Link: https://patch.msgid.link/r/fdac3395ecc52f87b722b54a055ced66733dc48f.1783360051.git.jacob.pan@linux.microsoft.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Jacob Pan <jacob.pan@linux.microsoft.com>
Fixes: 2c6cf6ab1564 ("iommufd: Allow binding to a noiommu device")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
To support no-IOMMU mode where userspace drivers perform unsafe DMA
using physical addresses, introduce a new API to retrieve the
physical address of a user-allocated DMA buffer that has been mapped to
an IOVA via IOMMU_IOAS_MAP. The mapping is backed by SW-only I/O page
tables maintained by the GENERIC_PT framework.
Link: https://patch.msgid.link/r/a60a601509688e8552c75e668deb548c93974a3b.1783360051.git.jacob.pan@linux.microsoft.com
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jacob Pan <jacob.pan@linux.microsoft.com>
Fixes: 2c6cf6ab1564 ("iommufd: Allow binding to a noiommu device")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
mem_alloc_profiling_enabled() tells whether memalloc profiling is
currently enabled. However, even when this function returns false,
it can be enabled later.
However, this is not enough. Some optimizations can be applied only when
memalloc profiling is permanently disabled. For example, to skip the
creation of KMALLOC_NO_OBJ_EXT caches at boot time, mem_profiling must
be set to "never", "0" w/ debugging on, or have been shutdown so that
it can no longer be enabled.
Introduce mem_alloc_profiling_permanently_disabled() for this purpose.
Signed-off-by: Harry Yoo (Oracle) <harry@kernel.org>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Link: https://patch.msgid.link/20260713-kmalloc-no-objext-v3-3-47c7bd138de7@kernel.org
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
|
|
Bootstrap caches are created with SLAB_NO_OBJ_EXT to disallow sheaves
and obj_exts.
To allow disabling obj_exts while allowing sheaves, decouple
SLAB_NO_SHEAVES from SLAB_NO_OBJ_EXT. Bootstrap caches now have both
SLAB_NO_SHEAVES and SLAB_NO_OBJ_EXT.
No functional change intended.
Reviewed-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Signed-off-by: Harry Yoo (Oracle) <harry@kernel.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Link: https://patch.msgid.link/20260713-kmalloc-no-objext-v3-2-47c7bd138de7@kernel.org
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
|
|
Sashiko review pointed out the following issue.
If a thread is stopped in syscall_trace_enter() for ptrace, another
thread can install a seccomp filter with SECCOMP_FILTER_FLAG_TSYNC
(e.g., via seccomp_attach_filter()). This will successfully set
SYSCALL_WORK_SECCOMP on the stopped thread, but syscall_trace_enter()
evaluates a cached 'work' variable sampled on entry. Consequently,
the subsequent check for SYSCALL_WORK_SECCOMP misses the newly
assigned flag, and the filter is silently bypassed.
This race condition could allow an unprivileged process to execute
a prohibited system call (e.g., execve) that the newly installed filter
was intended to block, especially since the tracer might have modified
the system call number during the ptrace stop.
Fix this by re-reading the syscall_work flags after ptrace handling,
so that any new SYSCALL_WORK_SECCOMP flag set by another thread via
TSYNC during the ptrace stop is observed before the subsequent
seccomp check.
Fixes: 142781e108b1 ("entry: Provide generic syscall entry functionality")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20260629132914.1135C1F000E9@smtp.kernel.org/
Link: https://patch.msgid.link/20260713025712.416366-1-ruanjinjie@huawei.com
|
|
Sync some i915/display changes
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
A task's slice grants it cpu occupancy - how long it holds its cpu. In a
sub-scheduler hierarchy cpu access is delegated through revocable
capabilities, so a task's occupancy must follow them. Only its own scheduler
sets its slice, and extending the slice is allowed only while that scheduler
holds baseline cpu access (SCX_CAP_BASE) on the cpu. Otherwise a scheduler
could keep occupying a cpu it has been denied simply by handing out long
slices.
The cap check reads effective caps, which are coherent only under the task's
rq lock, and the kernel decrements the slice under that lock as the task
runs, so a running task's slice can be changed only there while a queued
task's can be set directly. Make scx_bpf_task_set_slice() apply the slice
under the rq lock. Synchronously when the caller already holds it, otherwise
by stashing it in the new p->scx.slice_oob, tagged with the scheduler's id
so a request that outlived a reassignment is dropped. Whether the caller
holds @p's current rq lock is tested with p->scx.runnable_cpu.
Revocation is enforced through the same grant. When a cpu's effective caps
lose SCX_CAP_BASE, the cap-revoke reenq scan also checks the running task
and zeroes its slice to evict it. The scan runs as a balance callback after
the pick, so this catches both the task that was running when the revoke
landed and a capless task the pick just promoted off the local DSQ. The
paths that keep a task on its cpu - holding on to the last runnable task in
balance, the ENQ_LAST reinsertion and the slice refill on pick - skip tasks
lacking baseline access. A migration-disabled task is exempt, mirroring its
capless admission on insert.
v4: Test rq ownership with p->scx.runnable_cpu, closing a remote-wakeup TOCTOU. (sashiko AI)
v3: Keep a pending out-of-band slice request across refill and preserve. (sashiko AI)
v2: Only write slice directly when @p is queued on the held rq. (sashiko AI)
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
Add p->scx.runnable_cpu, the cpu @p is runnable on, or -1 when it is not.
It is stamped as @p joins the runnable_list (set_task_runnable()) and
cleared as it leaves (clr_task_runnable()), both under the rq lock.
task_cpu() can't answer "is @p on this rq" reliably: a remote wakeup changes
it under @p's pi_lock alone, without the source rq lock, so it can read as
the locked rq while @p is really elsewhere. runnable_cpu changes only under
the rq lock, so a caller holding an rq lock can compare against it to know
whether that is @p's current rq.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
When a sub-scheduler dispatches a task to a CPU it lacks the required
capability on, the task must be rejected rather than allowed to run.
Add the machinery for that. Each rq gets a reject DSQ, a kernel-internal
holding queue that is never run and that the BPF scheduler cannot reach. An
insert that must be refused is diverted there instead of the local DSQ, and
a deferred requeue then hands the parked tasks back to the BPF scheduler to
re-decide. A cap revoke extends this to already-queued tasks. When the
revoke reaches the cpu's effective caps, the cpu scans its local DSQ and
reenqueues the tasks that no longer qualify.
A migration-disabled task must run on its cpu, so a capless one is admitted
anyway and counted in the new SCX_EV_SUB_FORCED_ADMIT event.
This is preparation for the actual sub-sched cap enforcement. The divert is
wired but inert here.
v2: Admit offline-rq and migration_pending inserts to local, not reject. (sashiko AI)
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
Add missing comment for struct member @messages.
Use the struct keyword for a struct's kernel-doc heading.
Add missing comments for nested aggregate structs.
Repair some typos.
Warning: include/uapi/sound/firewire.h:97 struct member 'messages' not described in 'snd_firewire_event_ff400_message'
Warning: ../include/uapi/sound/firewire.h:220 cannot understand function prototype: 'struct snd_firewire_motu_register_dsp_parameter'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260713180303.526409-4-rdunlap@infradead.org
|
|
- add missing function parameter descriptions
- drop some incorrect function parameter descriptions
- add missing function Return value sections
- use the correct function prototype names in the comments
These changes avoid many warnings (examples):
Warning: include/sound/hda_regmap.h:80 function parameter 'codec' not described in 'snd_hdac_regmap_write'
Warning: include/sound/hda_regmap.h:80 function parameter 'verb' not described in 'snd_hdac_regmap_write'
Warning: include/sound/hda_regmap.h:80 Excess function parameter 'reg' description in 'snd_hdac_regmap_write'
Warning: include/sound/hda_regmap.h:80 No description found for return value of 'snd_hdac_regmap_write'
Warning: include/sound/hda_regmap.h:99 function parameter 'codec' not described in 'snd_hdac_regmap_update'
Warning: include/sound/hda_regmap.h:99 expecting prototype for snd_hda_regmap_update(). Prototype was for snd_hdac_regmap_update() instead
Warning: include/sound/hda_regmap.h:116 expecting prototype for snd_hda_regmap_read(). Prototype was for snd_hdac_regmap_read() instead
Warning: include/sound/hda_regmap.h:116 function parameter 'codec' not described in 'snd_hdac_regmap_read'
Warning: include/sound/hda_regmap.h:137 function parameter 'dir' not described in 'snd_hdac_regmap_get_amp'
Warning: include/sound/hda_regmap.h:137 Excess function parameter 'direction' description in 'snd_hdac_regmap_get_amp'
Warning: include/sound/hda_regmap.h:137 No description found for return value of 'snd_hdac_regmap_get_amp'
Warning: include/sound/hda_regmap.h:161 function parameter 'dir' not described in 'snd_hdac_regmap_update_amp'
Warning: include/sound/hda_regmap.h:161 Excess function parameter 'direction' description in 'snd_hdac_regmap_update_amp'
Warning: include/sound/hda_regmap.h:161 No description found for return value of 'snd_hdac_regmap_update_amp'
Warning: include/sound/hda_regmap.h:182 function parameter 'dir' not described in 'snd_hdac_regmap_get_amp_stereo'
Warning: include/sound/hda_regmap.h:182 Excess function parameter 'ch' description in 'snd_hdac_regmap_get_amp_stereo'
Warning: include/sound/hda_regmap.h:182 No description found for return value of 'snd_hdac_regmap_get_amp_stereo'
Warning: include/sound/hda_regmap.h:206 function parameter 'dir' not described in 'snd_hdac_regmap_update_amp_stereo'
Warning: include/sound/hda_regmap.h:206 Excess function parameter 'direction' description in 'snd_hdac_regmap_update_amp_stereo'
Warning: include/sound/hda_regmap.h:206 No description found for return value of 'snd_hdac_regmap_update_amp_stereo'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260713180303.526409-3-rdunlap@infradead.org
|
|
Inform kernel-doc that the comment block is for structs to void
warnings:
Warning: include/sound/ac97/codec.h:46 cannot understand function prototype: 'struct ac97_codec_device'
Warning: include/sound/ac97/codec.h:62 cannot understand function prototype: 'struct ac97_codec_driver'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260713180303.526409-2-rdunlap@infradead.org
|
|
The variable-sized buffer buf in struct btrfs_ioctl_search_args_v2 is
declared as __u64[], but it holds a packed byte stream of search results,
where all offsets into the buffer are in bytes.
Declaring buf as __u64[] makes it easy for user space to write incorrect
pointer arithmetic: adding a byte offset directly to a __u64 pointer
scales the offset by 8, landing at byte position offset*8 instead of
offset.
This recently caused an infinite loop in btrfs-progs: the accessor read
all-zero data from misaddressed items, which fed zeroed search keys back
into the ioctl loop and spun forever. The issue was worked around at the
time by disabling TREE_SEARCH_V2 entirely in btrfs-progs (d73e69824854:
"btrfs-progs: temporarily disable usage of v2 of search tree ioctl").
The kernel side already treats buf as a byte buffer, so change the
declaration to __u8[] to match the actual semantics and prevent similar
misuse in user space. The change is ABI compatible: both the structure size
and alignment are unchanged.
Fixes: cc68a8a5a433 ("btrfs: new ioctl TREE_SEARCH_V2")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: You-Kai Zheng <ykzheng@synology.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
MGMT_EV_DEVICE_DISCONNECTED carries a reason field which is defined to
be one of MGMT_DEV_DISCONN_* (0x00..0x05). hci_disconn_complete_evt()
converts the HCI error with hci_to_mgmt_reason(), but two other paths
pass the raw HCI error straight through:
hci_cs_disconnect() -> cp->reason
mgmt_connect_failed() -> status
The latter is reached whenever the adapter is powered off or suspended:
hci_disconnect_all_sync() aborts every link with
HCI_ERROR_REMOTE_POWER_OFF, hci_disconnect_sync() deliberately does not
wait for HCI_EV_DISCONN_COMPLETE for that reason, so that
hci_abort_conn_sync() finishes the connection off through
hci_conn_failed() instead.
As a result userspace sees an out of range reason:
@ MGMT Event: Device Disconnected (0x000c) plen 8
BR/EDR Address: 8C:A9:6F:2C:51:46
Reason: Reserved (0x15)
bluetoothd: btd_bearer_disconnected() Unknown disconnection value: 21
bluetoothd: device_disconnected() Unknown disconnection value: 21
Export hci_to_mgmt_reason() and use it in both places, so that a power
off is reported as MGMT_DEV_DISCONN_REMOTE rather than as the raw
HCI_ERROR_REMOTE_POWER_OFF (0x15).
Fixes: d47da6bd4cfa ("Bluetooth: hci_core: Fix sending MGMT_EV_CONNECT_FAILED")
Fixes: 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
James Calligeros <jcalligeros99@gmail.com> says:
This series introduces a number of changes to the ASoC driver
for the Apple MCA peripheral to enable support for bidirectional
I2S. This is achieved by allowing frontends to act as clock consumers
and logically ORing data input lines when multiple backends are linked
to a frontend.
This allows the Texas Instruments speaker amps used on Apple Silicon Macs
(Apple-specific revisions of TAS2764 and TAS2770) to send their IVSENSE
data back to the SoC. Since these amps do not have any sort of integrated
speaker protection logic, we must use the IVSENSE data and the Thiele/Small
Parameters of the attached speaker(s) to implement our own in software.
Link: https://patch.msgid.link/20260711-apple-audio-redux-v4-0-2994d87c2f24@gmail.com
|
