| Age | Commit message (Collapse) | Author |
|---|
|
In HFS+ filesystems, during b-tree open (hfs_btree_open()), the code
verifies that the allocation map bit for the tree header (node 0) is
set. If not, it indicates a corrupted map record/bitmap and mounts
the volume as read-only (SB_RDONLY) to prevent further damage.
HFS filesystems share the same b-tree structure but currently lack
this corruption detection check.
Port this check to HFS, aligning its implementation with HFS+ to
maintain consistent b-tree logic across both filesystems:
1. Define struct hfs_bmap_ctx, and define HFS_TREE_HEAD and the relevant
map record indices in include/linux/hfs_common.h.
2. Port the necessary offset and length validation helpers to
fs/hfs/btree.h as static inline functions with robust null pointer
checks.
3. Implement static hfs_bmap_get_map_page() in fs/hfs/btree.c.
4. Implement static hfs_bmap_test_bit() in fs/hfs/btree.c to inspect
the B-tree bitmap using the get_map_page helper.
5. Implement static hfs_bmap_clear_bit() in fs/hfs/btree.c.
6. Rewrite hfs_bmap_alloc() in fs/hfs/btree.c to use the unified
hfs_bmap_get_map_page() helper, eliminating redundant page and offset
calculation code.
7. Refactor hfs_bmap_free() in fs/hfs/btree.c to use the new
hfs_bmap_clear_bit() helper.
8. In hfs_btree_open(), retrieve the header node via hfs_bnode_find(),
test its allocation bit with hfs_bmap_test_bit(), and release it
using hfs_bnode_put().
Suggested-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/all/6a36101b.be22b350.2a3e9.0001.GAE@google.com/T/#r446d0fed2a2900bd805534bbcb799d86619ae2ea
Signed-off-by: Aditya Prakash Srivastava <aditya.ansh182@gmail.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20260716074150.1660-1-aditya.ansh182@gmail.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
|
|
execution
The return values of syscall_enter_from_user_mode[_work]() are
non-intuitive. Both functions return the syscall number which should be
invoked by the architecture specific syscall entry code. The returned
number can be:
- the unmodified syscall number which was handed in by the caller
- a modified syscall number (ptrace, seccomp, trace/probe/bpf)
That has an additional twist. If the return value is -1L then the caller is
not allowed to modify the return value as that indicates that the modifying
entity requests to abort the syscall and set the return value already. That
can obviously not be differentiated from a syscall which handed in -1 as
syscall number.
The most trivial way to deal with that is:
set_return_value(regs, -ENOSYS);
nr = syscall_enter_from_user_mode(regs, nr);
if (valid(nr))
handle_syscall(regs, nr);
That's what LOONGARCH, RISCV, and X86 do. But PowerPC and S390 do not
preset the return value, so when user space hands in -1 and there is
nothing setting the return value in the entry work code, then the syscall
is skipped but the return value is whatever random data has been in the
return value register.
Change the return values of syscall_enter_from_user_mode[_work]() to
boolean and return false, when either ptrace or seccomp request to skip the
syscall. If they return true, update the syscall number as it might have
been changed.
That results in slightly different behaviour of the architectures versus
tracing.
If the syscall tracepoint has probe/BPF attached, those might set the
syscall number to -1 and also set the return value. PowerPC and S390 will
then overwrite that value with -ENOSYS. The other architectures will just
ignore it like any other invalid syscall and use the modified one.
Originally-by: Michal Suchánek <msuchanek@suse.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michal Suchánek <msuchanek@suse.de>
Link: https://patch.msgid.link/20260712141346.772209074@kernel.org
|
|
This prepares for changing the return types of
syscall_enter_from_user_mode[_work]() to bool, which in turn separates the
decision of invoking the syscall from the syscall number, which might have
been changed in the call by ptrace, seccomp, tracing.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michal Suchánek <msuchanek@suse.de>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20260712141346.699072205@kernel.org
|
|
Reread the syscall number from pt_regs and stop returning the eventually
modified syscall number.
That moves the reread to the end of syscall_trace_enter() and prepares for
moving it to the call site.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michal Suchánek <msuchanek@suse.de>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20260712141346.639115923@kernel.org
|
|
Move it out of line and let it reread the syscall number on it's own. That
makes the low level entry code denser and allows to move the reread to the
call site of syscall_trace_enter() once the tracer is fixed up.
To prevent the compiler from putting audit_context() out of line and
thereby breaking dead code elimination, mark audit_context()
__always_inline.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michal Suchánek <msuchanek@suse.de>
Reviewed-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20260712141346.576865340@kernel.org
|
|
phucduc.bui@gmail.com <phucduc.bui@gmail.com> did a bit of work to help
people avoid running into silly errors.
Link: https://patch.msgid.link/20260720033238.52479-1-phucduc.bui@gmail.com
|
|
blk_crypto_config_supported() is no longer called, so remove it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260718214655.63186-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
fscrypt_finalize_bounce_page() is no longer called, so remove it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260718214655.63186-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Update the comment for SB_INLINECRYPT to match the latest code, where
SB_INLINECRYPT now controls whether blk-crypto uses inline encryption
hardware rather than whether blk-crypto is used.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260718214655.63186-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Now that fscrypt always uses blk-crypto on block-based filesystems,
there's no meaningful difference between bio.c and inline_crypt.c.
Therefore merge the two files into one named block.c.
Note: I didn't carry over bio.c's "Copyright (C) 2015, Motorola
Mobility", as none of the code that applied to remained.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260713023708.9245-17-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Remove functions that are no longer used:
- fscrypt_decrypt_bio()
- fscrypt_decrypt_pagecache_blocks()
- fscrypt_inode_uses_fs_layer_crypto()
- fscrypt_inode_uses_inline_crypto()
- fscrypt_enqueue_decrypt_work()
This makes the decryption workqueue unused, so remove it too.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260713023708.9245-16-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
On block-based filesystems, fscrypt file contents encryption is now
always implemented using blk-crypto. This implementation supports
direct I/O.
Therefore, fscrypt_dio_supported() now always returns true, except in
the edge case where statx(STATX_DIOALIGN) is called on an encrypted
regular file that hasn't had its key set up. But that was really a
workaround rather than the desired behavior, so we can disregard it.
Thus, fscrypt_dio_supported() is no longer needed. Remove it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260713023708.9245-14-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
For encrypting and decrypting file contents on block-based filesystems
(i.e., ext4 and f2fs, but not ceph and ubifs), always use blk-crypto
instead of fs-layer crypto (direct use of crypto_skcipher).
Since the blk-crypto API provides a fallback to CPU-based encryption,
it's all that's needed on block-based filesystems. The support for two
alternative block-based file contents encryption implementations,
fs-layer and blk-crypto, existed mainly for historical reasons, as the
fs-layer path came first. Some of it is also still needed for the
non-block-based filesystems, but a lot of it isn't.
Removing the duplicate fs-layer code paths greatly simplifies the code,
most of which is done in later commits.
Specific implementation details:
- SB_INLINECRYPT now controls whether blk_crypto_config::allow_hw is set
to true, instead of whether blk-crypto is used at all. The effect is
that the semantics are preserved: the inlinecrypt mount option selects
the use of inline encryption hardware instead of the CPU.
- Set up a blk_crypto_key iff the file is a regular file on a
block-based filesystem. To determine whether the filesystem is
block-based, add a bit fscrypt_operations::is_block_based.
- Remove fscrypt_select_encryption_impl(). Move the logging logic that
was previously there into fscrypt_prepare_inline_crypt_key(). Note
that blk_crypto_config_supported() is no longer needed.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260713023708.9245-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
fscrypt uses inline encryption hardware only when the "inlinecrypt"
mount option is given. I'd like to keep that behavior even after
standardizing on the blk-crypto API for file contents encryption. That
is, the default should continue to be the well-tested CPU-based
encryption code, and the use of inline encryption hardware should
continue to be an opt-in feature for systems where it's beneficial and
has been fully validated (including verifying ciphertext correctness).
To support this use case, extend blk_crypto_config with a new flag
BLK_CRYPTO_CFG_ALLOW_HW.
For now it's always set. Later commits will change that.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260713023708.9245-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Now that the arrays of per-mode keys in struct fscrypt_master_key have
been replaced by a linked list, the definition of FSCRYPT_MODE_MAX
doesn't do anything useful. (Previously it was used to size these
arrays.) Remove it.
Link: https://patch.msgid.link/20260618231404.132829-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
When a blk_crypto_key starts being used or is evicted, fs/crypto/ calls
fscrypt_get_devices() to get the filesystem's list of block devices,
then iterates over them and calls blk_crypto_config_supported(),
blk_crypto_start_using_key(), or blk_crypto_evict_key() on each one.
Currently, the block device pointers are placed in a dynamically
allocated array. This dynamic allocation is problematic because:
- It can fail, especially at the fscrypt_destroy_inline_crypt_key() call
site when it's invoked for inode eviction under direct reclaim.
- fscrypt_destroy_inline_crypt_key() doesn't handle the failure. It
just zeroizes and frees the blk_crypto_key without calling
blk_crypto_evict_key(). That causes a use-after-free.
For now, let's fix this in the straightforward and easily-backportable
way by switching to an on-stack array. Currently the fscrypt
multi-device functionality is used only by f2fs, which has a hardcoded
limit of 8 block devices. An on-stack array works fine for that.
(Of course, this solution won't scale up to large number of block
devices. For that we'd need a different solution, like moving the block
device iteration into the filesystem. Or in the case of btrfs, which
will only support blk-crypto-fallback, we should make it just call
blk-crypto-fallback directly, so the block devices won't be needed.)
Fixes: 22e9947a4b2b ("fscrypt: stop holding extra request_queue references")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260713023708.9245-1-ebiggers%40kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260719055602.78828-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Use the struct keyword when describing a struct. Without that, the
type defaults to function.
Warning: ./include/linux/posix-timers_types.h:40 cannot understand
function prototype: 'struct posix_cputimer_base'
Warning: ./include/linux/posix-timers_types.h:55 cannot understand
function prototype: 'struct posix_cputimers'
Warning: ./include/linux/posix-timers_types.h:67 cannot understand
function prototype: 'struct posix_cputimers_work'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260720031236.3070575-2-rdunlap@infradead.org
|
|
Use the struct keyword when describing a struct.
Add missing kernel-doc for @it_pid_type.
Warning: ./include/linux/posix-timers.h:58 cannot understand
function prototype: 'struct cpu_timer'
Warning: ./include/linux/posix-timers.h:222 struct member
'it_pid_type' not described in 'k_itimer'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260720031236.3070575-1-rdunlap@infradead.org
|
|
Enable the uverbs robust udata interface in mana_ib by setting
uverbs_robust_udata and converting the driver to the new udata
handling model.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Replace the manual udata input copy and validation during
QP creation with the robust helper.
The irdma driver is backwards compatible with the legacy
i40iw userspace provider. The current create_qp ABI contains
two 8 byte fields. The legacy i40iw ABI was the same but
also contained two additional fields which were never actually
used. Furthermore, the i40iw userspace provider never explicitly
zero-initialized those extra fields, so there is a chance that
existing binaries are passing non-zero garbage values down
to the kernel.
Previously, the irdma driver only copied out the first 16
bytes and did not have any check for the rest of the buffer
being zero, so that additional garbage didn't matter.
By switching to ib_copy_validate_udata_in(), we will now be
checking to ensure that data beyond the kernel's definition
of the request is all zero.
In order to avoid breaking legacy binaries, we therefore need
to increase the request structure size to cover those garbage
fields.
- Legacy binaries will continue to pass down a 32 byte request,
with the driver copying the entire 32 bytes out but ignoring
the second 16 bytes, just as before.
- Newer binaries will pass down the normal 16 byte request. The
ib_copy_validate_udata_in() call will allow this to succeed
because we use user_compl_ctx as our minimum length (16 bytes).
- If the request is ever extended, the new fields would be
added after the "don't use" fields and would work as per
the normal uAPI mechanism.
Signed-off-by: Jacob Moroni <jmoroni@google.com>
Link: https://patch.msgid.link/20260713171257.3131493-5-jmoroni@google.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
'struct ib_frmr_pool_ops' and 'struct dma_buf_attach_ops' are not modified
in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
While at it, change a '1' into a 'true' into the mlx5_ib_dmabuf_attach_ops
structure. The 'allow_peer2peer' field is a bool and other usages of
'struct dma_buf_attach_ops' prefer using true/false.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
77631 10392 320 88343 15917 drivers/infiniband/hw/mlx5/mr.o
After:
=====
text data bss dec hex filename
77759 10264 320 88343 15917 drivers/infiniband/hw/mlx5/mr.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/22f2263c04cc94e242cee712e6e6d82b86ac353d.1784017128.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
On 32-bit systems the config space is too large to ioremap in one go, so
pci_ecam_create() maps each bus segment separately and relies on the
->add_bus callback (pci_ecam_add_bus) to populate the per-bus mapping in
cfg->winp[]. pci_ecam_map_bus() then uses that mapping as the base for
every config access.
The generic ECAM ops (pci_generic_ecam_ops) already provide the ->add_bus
and ->remove_bus callbacks, but the CAM (legacy) ops in pci-host-generic.c
do not. As a result, on a 32-bit host using "pci-host-cam-generic" the
per-bus mapping is never set up and the first config read dereferences a
NULL base, crashing during bus enumeration:
Unable to handle kernel NULL pointer dereference at virtual address 00000800
Oops [#1]
CPU: 0 PID: 1 Comm: swapper Not tainted 6.9.7+ #43
Hardware name: Digilent Nexys-Video-A7 RV32 (DT)
epc : pci_generic_config_read+0x40/0xb0
ra : pci_generic_config_read+0x2c/0xb0
[<c038db9c>] pci_generic_config_read+0x40/0xb0
[<c038da04>] pci_bus_read_config_dword+0x50/0xb0
[<c0391e94>] pci_bus_generic_read_dev_vendor_id+0x3c/0x1ec
[<c039245c>] pci_scan_single_device+0xa4/0x11c
[<c0392570>] pci_scan_slot+0x9c/0x23c
[<c039388c>] pci_scan_child_bus_extend+0x58/0x2f4
[<c0393db0>] pci_scan_root_bus_bridge+0x64/0xe8
[<c0393e54>] pci_host_probe+0x20/0xc8
[<c03bc6f4>] pci_host_common_probe+0x144/0x1e4
Fix this by giving the CAM ops the same ->add_bus/->remove_bus callbacks.
Since pci_ecam_add_bus() and pci_ecam_remove_bus() are static to ecam.c,
move the CAM ops definition there as pci_generic_cam_ops (mirroring
pci_generic_ecam_ops) and export it for pci-host-generic.c to reference.
Fixes: 8fe55ef23387 ("PCI: Dynamically map ECAM regions")
Signed-off-by: Steffen Persvold <spersvold@gmail.com>
[mani: removed timestamp from log]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260709122446.3151899-1-spersvold@gmail.com
|
|
Add the DPCD registers and detection required to support UHBR link rates
over Thunderbolt tunnels.
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260714152700.555527-2-imre.deak@intel.com
|
|
Hybrid automata monitors's clock variables have two different
representations:
- The invariant representation, which is the timestamp when the invariant
expires
- The guard representation, which is the timestamp when the clock is last
reset
This dual representation makes the logic quite difficult to follow (well,
at least for me). It also complicates the monitors and the generation tool,
as it requires conversion back and forth between the representation.
Simplify by using the clock variables for a single purpose: storing the
time stamp since the clock is last reset.
This also allows simplifying rvgen, which will be done in a follow-up
commit.
Reviewed-by: Gabriele Monaco <gmonaco@redhat.com>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/c0f600dcbf3d8b487c944406851a39146f4d91fa.1781847583.git.namcao@linutronix.de
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
|
|
Cross-merge networking fixes after downstream PR (net-7.2-rc4).
No conflicts.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core into gpio/for-next
software node: provide support for fw_devlink
This series extends software node support to use fw_devlink and adds test
coverage for the new behaviour.
This is a stable tag for other trees to merge.
|
|
Sub-schedulers don't get cgroups yet: every task_group is inited on the root
sched and the routing added by the previous patches always resolves to it.
Add the handover: an enabling sub-scheduler takes over the cgroups in its
subtree and a disabling one returns them to its parent.
scx_cgroup_claim_subtree() runs while the sub enables, after the subtree's
cgrp->scx_sched's are set and before any task is claimed. It inits each
subtree task_group on the sub, exits it from the parent and updates
tg->scx.sched. A failed ops.cgroup_init() unwinds the sub-side inits and
aborts the enable with the parent untouched.
Disabling reverses it with scx_cgroup_return_subtree(): exit each cgroup
from the sub, then re-init it on the parent with the current tg->scx.*
values, resyncing weight and bandwidth changes made while the sub had it.
When a re-init fails, the parent is failed and the remaining task_groups
still transfer uninited and get no cgroup ops - the same punting done for
tasks. The dying parent's own disable moves them onward.
The handover walks include dying but not yet offlined task_groups, the same
as root's bulk walks: a removed cgroup keeps hosting scheduling events until
its dying tasks finish their final context switches, and its
ops.cgroup_exit() must follow the last of them. tg on/offlining is excluded
through cgroup_lock(), so either ordering against an rmdir of a subtree
cgroup delivers balanced init/exit pairs.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
With sub-schedulers claiming cgroup subtrees, cgroup ops must be delivered
to each task_group's sched rather than always to root. Add tg->scx.sched to
track which sched initialized the task_group. It is set and cleared together
with SCX_TG_INITED.
Deliver the ops accordingly:
- ops.cgroup_exit() goes to the sched whose ops.cgroup_init() it pairs with.
- ops.cgroup_prep_move/move/cancel_move() go to the task's sched, and only
for moves that don't re-home the task. A re-homing move is reported
through the ops.exit_task/init_task() pair instead. The cgroups passed to
the move ops can be outside the sched's inited set as the cpu controller
can be coarser than the sub-scheduler topology.
- Knobs of a cgroup belong to the parent, so ops.set_weight/idle/bandwidth()
go to the parent task_group's sched.
All task_groups currently resolve to the root sched, so no behavior changes
until sub-schedulers start claiming cgroups.
While at it, scx_cgroup_init() is restructured so both paths share the
recording.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
A subsystem can attach to the cgroup hierarchy itself, independent of which
controllers are enabled where - BPF hooks already behave this way and
sched_ext sub-schedulers do too. Controller callbacks can't track task
migrations for them: sched_ext must re-home a task whose migration crosses a
sub-scheduler boundary, but the cpu controller's attach callbacks fire only
when the task_group changes and miss moves whenever the controller topology
is coarser than the sub-scheduler topology.
Add cgroup_task_notifier with per-task migration events mirroring the
can_attach/attach/cancel_attach phases so that a consumer which prepares
per-task state can also veto a migration: CGROUP_TASK_MIGRATING fires
pre-commit, CGROUP_TASK_MIGRATED post-commit and
CGROUP_TASK_MIGRATE_CANCELED unwinds a failed migration. Only migrations
that change a task's dfl cgroup are reported.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
Add support for AES-XTS to the crypto library.
This will be used to provide a streamlined implementation of the
"xts(aes)" crypto_skcipher algorithm. I'm also planning to use this
directly in fscrypt and blk-crypto-fallback.
As usual, the architecture-optimized AES-XTS code will be migrated into
the library as well (using the hooks provided in this commit),
eliminating lots of repetitive boilerplate code. Compared to direct
implementation of "xts(aes)", I've also eliminated the requirement for
architectures to implement ciphertext stealing, as the library just
handles it portably instead. That will simplify things considerably.
Initial test coverage is provided by the crypto_skcipher support added
in a later commit. I'm planning a KUnit test suite as well.
Link: https://patch.msgid.link/20260715221153.246410-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add support for AES-CTR and AES-XCTR to the crypto library.
These will be used to provide streamlined implementations of the
"ctr(aes)" and "xctr(aes)" crypto_skcipher algorithms. Most users of
"ctr(aes)" will also be able to switch to the library, which as usual
will be simpler and faster, e.g.:
- net/mac80211/fils_aead.c
- net/mac802154/llsec.c
As usual, the architecture-optimized AES-CTR and AES-XCTR code will be
migrated into the library as well (using the hooks provided in this
commit), eliminating lots of repetitive boilerplate code.
This is also a prerequisite for supporting AES-GCM, AES-CCM, and
AES-HCTR2 in the crypto library.
Initial test coverage is provided by the crypto_skcipher support added
in a later commit. I'm planning a KUnit test suite as well.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://patch.msgid.link/20260715221153.246410-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add support for AES-CBC and AES-CBC-CTS to the crypto library.
These will be used to provide streamlined implementations of the
"cbc(aes)" and "cts(cbc(aes))" crypto_skcipher algorithms. Most users
of these crypto_skcipher algorithms will also be able to switch to the
library, which as usual will be simpler and faster, e.g.:
- block/blk-crypto-fallback.c (for AES-128-CBC-ESSIV)
- fs/crypto/crypto.c (for AES-128-CBC-ESSIV)
- fs/crypto/fname.c (for AES-256-CTS and AES-128-CBC)
- kernel/bpf/crypto.c
- net/ceph/crypto.c
- security/keys/encrypted-keys/encrypted.c
As usual, the architecture-optimized AES-CBC and AES-CBC-CTS code will
be migrated into the library as well (using the hooks provided in this
commit), eliminating lots of repetitive boilerplate code.
Initial test coverage is provided by the crypto_skcipher support added
in a later commit. I'm planning a KUnit test suite as well.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://patch.msgid.link/20260715221153.246410-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Add support for AES-ECB to the crypto library.
This will be used to provide a streamlined implementation of the
"ecb(aes)" crypto_skcipher algorithm. fs/crypto/keysetup_v1.c will also
use aes_ecb_encrypt() directly.
As usual, the architecture-optimized AES-ECB code will be migrated into
the library as well (using the hooks provided in this commit),
eliminating lots of repetitive boilerplate code.
ECB is obsolete of course, but we need this for parity with the
traditional API and to support some odd users of ECB in the kernel.
Initial test coverage is provided by the crypto_skcipher support added
in a later commit. I'm planning a KUnit test suite as well.
Create a documentation file libcrypto-unauth-encryption.rst to hold the
documentation for this and other unauthenticated encryption modes.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://patch.msgid.link/20260715221153.246410-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Make the AES-XTS key verification code callable by the crypto library by
splitting out a helper function that doesn't use crypto_skcipher.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Link: https://patch.msgid.link/20260715221153.246410-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
The BPF_MOV64_PERCPU_REG insn requires JIT to emit native code to for
'dst_reg = src_reg + <percpu_base_off>'.
However, the interpreter ignores the 'off' at its ALU64_MOV_X label.
The 'off' indicates the insn is BPF_MOV64_PERCPU_REG insn. Then, when
the interpreter loads memory from the register, it will hit a page
fault.
[ 2.545572] BUG: unable to handle page fault for address: ffffffffacaaf034
[ 2.546485] #PF: supervisor read access in kernel mode
[ 2.547167] #PF: error_code(0x0000) - not-present page
[ 2.547850] PGD 134e63067 P4D 134e63067 PUD 134e64063 PMD 10021c063 PTE 800ffffeca550062
[ 2.548912] Oops: Oops: 0000 [#1] SMP PTI
Set jit_required as true in order to disallow interpreter fallback in
core.c::__bpf_prog_select_runtime(), if any BPF_ADDR_PERCPU insn is
patched to the prog.
BTW, rename the helper bpf_map_supports_cpu_flags() to
bpf_map_is_percpu_map().
Fixes: 7bdbf7446305 ("bpf: add special internal-only MOV instruction to resolve per-CPU addrs")
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/bpf/20260715141122.15783-4-leon.hwang@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"The biggest core change is the reliable wake fix for scsi_schedule_eh
which is used by both libata and libsas which could otherwise cause
error handler hangs due to rare races.
All other fixes are in drivers (well except the export symbol removal)
the next biggest being the target PR-OUT transportid parsing fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: hpsa: Fix DMA mapping leak on IOACCEL2 reset path
scsi: elx: efct: Fix refcount leak in efct_hw_io_abort()
scsi: elx: efct: Fix I/O leak on unsupported additional CDB
scsi: core: wake eh reliably when using scsi_schedule_eh
scsi: target: core: Fix iSCSI ISID use-after-free in REGISTER AND MOVE
scsi: target: Bound PR-OUT TransportID parsing to the received buffer
scsi: lpfc: Fix memory leak in lpfc_sli4_driver_resource_setup()
scsi: sg: Report request-table problems when any status is set
scsi: ufs: core: tracing: Do not dereference pointers in TP_printk()
scsi: bfa: Reduce kernel stack usage in bfa_fcs_lport_fdmi_build_portattr_block()
scsi: xen: scsiback: Free the command tag on the TMR submit-failure path
scsi: xen: scsiback: Free unsubmitted command instead of double-putting it
scsi: core: Remove export for scsi_device_from_queue()
|
|
Pull to receive:
477869bfafea ("sched_ext: Reject setting disallow from init_task outside the enable path")
5f8b69642d18 ("sched_ext: Take cgroup_lock() first in scx_cgroup_lock()")
8c13364db9c9 ("sched_ext: Skip sub-disable teardown for never-linked sub-schedulers")
5cdc92859809 ("sched_ext: Don't enable non-ext tasks in the sub-sched task loops")
as dependencies for the upcoming cgroup migration patchset and to
resolve the conflicts with the ext.c/sub.c split on for-7.3.
5f8b69642d18 comments scx_cgroup_lock() which for-7.3 exported for
sub.c. Resolved by keeping the exported version with the comment.
8c13364db9c9 and 5cdc92859809 patch the pre-split sub-sched enable and
disable paths in ext.c which for-7.3 moved to sub.c. Resolved by
applying the never-linked teardown skip and the class gates to sub.c.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
The p->scx.disallow revert assumes the root enable path, where the switching
loop reads the reverted policy right afterwards and leaves the task off SCX.
The sub-scheduler disable path also reaches it when re-initializing the
returned tasks on a root parent. Nothing reads the policy there: the task is
enabled on root anyway and keeps running on the ext class with a silently
rewritten policy.
Kill the sched instead, matching the fork and non-root branches, and update
the disallow documentation, which equated !fork with the load path and
pointed at a stale debugfs path for nr_rejected.
Fixes: 337ec00b1d9c ("sched_ext: Implement cgroup sub-sched enabling and disabling")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
The functions ata_eh_qc_complete() and ata_eh_qc_retry() are used only in
libata-eh.c. So remove the declaration of these functions from
include/linux/libata.h and define them as static. While at it, add a
missing blank line between variable declaration and code in these two
functions.
No functional changes intended.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
|
|
Define the translation for the REMOVE ELEMENT AND MODIFY ZONES command
(SERVICE ACTION IN command with service action
SAI_REMOVE_ELEMENT_AND_MODIFY_ZONES) into the ATA command
ATA_CMD_REMOVE_ELEMENT_AND_MODIFY_ZONES with the new function
ata_scsi_remove_element_and_modify_zones_xlat()
The array of supported commands ata_supported_cmds is modified to add a
new entry for this command. ata_scsi_cmd_is_supported() is also modify to
correctly handle this new entry depending on the target device flag
ATA_DFLAG_DEPOP being set, and the target device being a ZAC zoned device.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
|
|
Define the translation for the RESTORE ELEMENTS AND REBUILD command
(SERVICE ACTION IN command with service action
SAI_RESTORE_ELEMENTS_AND_REBUILD) into the ATA command
ATA_CMD_RESTORE_ELEMENTS_AND_REBUILD with the new function
ata_scsi_restore_elements_and_rebuild_xlat()
The array of supported commands ata_supported_cmds is modified to add a
new entry for this command. ata_scsi_cmd_is_supported() is also modify to
correctly handle this new entry depending on the target device flag
ATA_DFLAG_DEPOP_RESTORE being set.
The ATA command completion is handled using the function
ata_scsi_depop_ua_cap_changed_complete() so that on a successful
completion, a UNIT ATTENTION with the additional sense code set to
CAPACITY DATA HAS CHANGED is raised.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
|
|
Define the translation for the REMOVE ELEMENT AND TRUNCATE command
(SERVICE ACTION IN command with service action
SAI_REMOVE_ELEMENT_AND_TRUNCATE) into the ATA command
ATA_CMD_REMOVE_ELEMENT_AND_TRUNCATE with the new function
ata_scsi_remove_element_and_truncate_xlat()
The array of supported commands ata_supported_cmds is modified to add a
new entry for this command. ata_scsi_cmd_is_supported() is also modify to
correctly handle this new entry depending on the target device flag
ATA_DFLAG_DEPOP being set.
The ATA command completion is handled using the function
ata_scsi_depop_ua_cap_changed_complete() so that on a successful
completion, a UNIT ATTENTION with the additional sense code set to
CAPACITY DATA HAS CHANGED is raised.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
|
|
Define the translation for the GET PHYSICAL ELEMENT STATUS command
(SERVICE ACTION IN command with service action
SAI_GET_PHYSICAL_ELEMENT_STATUS) into the ATA command
ATA_CMD_GET_PHYS_ELEMENT_STATUS with the new function
ata_scsi_get_phys_element_status_xlat(). The reply of this function also
needs translation from little endian to big endian. This is done with the
completion callback ata_scsi_get_phys_element_status_complete().
The array of supported commands ata_supported_cmds is modified to add a
new entry for this command. ata_scsi_cmd_is_supported() is also modified
to correctly handle this new entry depending on the target device flag
ATA_DFLAG_DEPOP being set.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
|
|
Introduce the device flags ATA_DFLAG_DEPOP to indicate support by a device
for the basic commands of the storage element depopulation feature set,
that is, the GET PHYSICAL ELEMENT STATUS and REMOVE ELEMENT AND TRUNCATE
commands. The device flag ATA_DFLAG_DEPOP_RESTORE flag is introduced to
indicate support for the RESTORE ELEMENTS AND REBUILD command. Both flags
are obtained from the command support bits of the qword at bytes 152 to
159 of the supported capabilities log page.
For ZAC devices, the device flag ATA_DFLAG_DEPOP_MODIFY is introduced to
indicate support for the REMOVE ELEMENT AND MODIFY ZONES command. This
support is indicated by the REMOVE ELEMENT AND MODIFY ZONES SUPPORTED bit
in the qword at byte 8 to 15 of the zoned device information log page.
The function ata_dev_config_depop() is introduced to set these flags
based on the content of the supported capabilities log and zoned device
information log. As per the ACS specifications, NCQ autosense support is
also mandatory if these flags are set.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
|
|
The flags field of struct ata_device has the unsigned long type. Define
all the ATA_DFLAG_XXX flags using a 1UL bit shift to match this type, thus
avoiding flags to become signed values (e.g. for bit 31 flag).
To avoid all other values defined in the same enum as the ATA_DFLAG_XXX
flags to implicitly also become unsigned long values, move the device
flags definition to a separate enum.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add to include/scsi/scsi_proto.h the definition of the four service
actions of the SERVICE ACTION IN (16) command for the storage element
depopulation and restoration capabilities, as defined in the SBC5 and
ZBC2 specifications. These are:
- SAI_GET_PHYSICAL_ELEMENT_STATUS (GET PHYSICAL ELEMENT STATUS command)
- SAI_REMOVE_ELEMENT_AND_TRUNCATE (REMOVE ELEMENT AND TRUNCATE command)
- SAI_RESTORE_ELEMENTS_AND_REBUILD (RESTORE ELEMENTS AND REBUILD command)
- SAI_REMOVE_ELEMENT_AND_MODIFY_ZONES (REMOVE ELEMENT AND MODIFY ZONES
command)
The physical element types and physical element health values reported by
the GET PHYSICAL ELEMENT STATUS command are also defined.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
|
|
Pull drm fixes from Daie Airlie:
"Weekly drm fixes, there is amdgpu, xe and i915 and then a lot of
scattered fixes.
Looks about the right level for the new right.
ttm:
- Handle NULL pages and backup handles in ttm_pool_backup() correctly
gpusvm:
- Improve unmap and error handling on gpusvm
udmabuf:
- Always synchronize for CPU in begin_cpu_udmabuf
xe:
- Fix BO prefetch with CONSULT_MEM_ADVISE_PREF_LOCK
- Hold a dma-buf reference for imported BOs
- Fix writable override for CRI
- Fix VF CCS attach/detach race with in-flight BO moves
- Fix WOPCM size for LNL+
- Reset current_op in xe_pt_update_ops_init
- Keep scheduler timeline name alive
- Hold device ref until queue teardown completes
- Disable display in admin only PF mode
i915:
- NV12 display fix for bigjoiner
- clear watermark on plane disable
- GT selftest fixes
host1x:
- Fix UAF
amdxdna
- Fix UAF
- Reject more invalid amdxdna command submissions
ivpu:
- Fix wrong read
- Handle invalid firmware log in ivpu
panthor:
- Fix error handling
virtio:
- Fix virtio deadlock
- Fix invalid gem detach
amdgpu:
- DCN 4.2 fixes
- NUTMEG fixes
- 8K panel fix
- Backlight fixes
- UserQ fix
- Fix bo->pin leaking in amdgpu_bo_create_reserved()
- VFCT fixes
- devcoredump fixes
- Display fixes
- SMU7 DPM fix
- AC/DC fixes for SMU7 and SI
- Queue reset fix
- PCIe DPM fix
- XHCI/GPU resume ordering fix
- Pageflip timeout fix
amdkfd:
- Fix potential overflow in CWSR size calculation
- DQM error clean up fixes
* tag 'drm-fixes-2026-07-18-1' of https://gitlab.freedesktop.org/drm/kernel: (61 commits)
Revert "drm/amd/display: Restore 5s vbl offdelay for NV3x+ DGPUs"
drm/amd/display: check GRPH_FLIP status before sending event
drm/amd/display: consolidate DCN vblank/flip handling onto vupdate_no_lock
drm/amd: Create a device link between APU display and XHCI devices
drm/amd/display: wire DCN42B mcache programming callback
drm/amd/display: set new_stream to NULL after release
drm/amd/display: Force PWM backlight on Lenovo Legion 5 15ARH05
drm/amdkfd: free MQD managers on DQM init failures
drm/amdgpu/ttm: Consider concurrent VM flushes for buffer entities
drm/amd/pm/smu7: Fix AC/DC switch notification
drm/amdgpu: Disable PCIe dynamic speed switching on Ryzen Pinnacle Ridge
drm/amdgpu: always emit the job vm fence
drm/amd/pm/si: Fix AC/DC switch notification
drm/amd/pm/si: Don't schedule thermal work when queue isn't initialized
drm/amd/display: dce100: skip non-DP stream encoders for DP MST
drm/amd/display: Set native cursor mode for disabled CRTCs
drm/amd/pm/ci: Don't disable MCLK DPM on Bonaire 0x6658 (R7 260X)
drm/amd/display: fix __udivdi3 link error
drm/amdgpu: Reserve space for IB contents in devcoredumps
drm/amdgpu: Print vmid, pasid and more task info in devcoredump
...
|
|
The Lenovo Legion 5 15ARH05 (Renoir) ships a BOE 0x08DF eDP panel that
advertises AUX/DPCD backlight control, so amdgpu's automatic detection
(amdgpu_backlight == -1) selects AUX. On this panel the AUX backlight
path has no effect: brightness writes are accepted but the panel level
never changes, the display is stuck at a fixed brightness and
max_brightness is reported as a bogus 511000. As a result neither the
desktop brightness slider nor the brightness hotkeys do anything.
Forcing PWM backlight (amdgpu.backlight=0) restores working control:
max_brightness becomes 65535 and the level tracks writes. This has long
been applied by users as a manual kernel-parameter workaround.
Extend the generic panel backlight quirk with a force_pwm flag, add an
entry for the Legion 5 15ARH05 / BOE 0x08DF panel, and have amdgpu
disable AUX backlight (use PWM) when the quirk matches and the user
lets the driver auto-select the backlight type.
Signed-off-by: Alessandro Rinaldi <ale@alerinaldi.it>
Tested-by: Alessandro Rinaldi <ale@alerinaldi.it>
Reviewed-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 81b39f43e7e53589491e2eef6bad5389626b4b9c)
Cc: stable@vger.kernel.org
|
|
Cross-merge BPF and other fixes after downstream PR.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Pull bpf fixes from Kumar Kartikeya Dwivedi:
- Fix a UAF in socket clone early bailout paths (Matt Bobrowski)
- Reject unhashed UDP sockets on sockmap update to prevent refcount
leaks (Michal Luczaj)
- Account for receive queue data in FIONREAD on sockmap sockets without
a verdict program (Mattia Meleleo)
- Reject negative constant offsets for verifier buffer pointers (Sun
Jian)
- Fix for tracing of kfuncs with implicit arguments (Ihor Solodrai)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Cover tracing implicit kfunc args
bpf: Fix tracing of kfuncs with implicit args
selftests/bpf: Cover negative buffer pointer offsets
bpf: Reject negative const offsets for buffer pointers
selftests/bpf: Test FIONREAD on a sockmap socket without a verdict program
bpf, sockmap: Account for receive queue in FIONREAD without a verdict program
selftests/bpf: Fail unbound UDP on sockmap update
selftests/bpf: Adapt sockmap update error handling
bpf, sockmap: Reject unhashed UDP sockets on sockmap update
selftests/bpf: Ensure UDP sockets are bound
bpf: Fix UAF in sock clone early bailouts
|
