| Age | Commit message (Collapse) | Author |
|---|
|
commit e5248a7426030db1e126363f72afdb3b71339a5c upstream.
Threads parked in svc_rdma_sq_wait() on sc_sq_ticket_wait or
sc_send_wait can hang indefinitely in TASK_UNINTERRUPTIBLE state
across transport teardown, pinning svc_xprt references and
blocking svc_rdma_free().
The close path sets XPT_CLOSE before invoking xpo_detach and both
wait_event predicates include an XPT_CLOSE term, but the
predicates are re-evaluated only on wakeup. sc_sq_ticket_wait has
no completion-driven wake path; it is advanced solely by the
chained ticket handoff inside svc_rdma_sq_wait() itself. Without
an explicit wake at close, parked threads never observe
XPT_CLOSE, hold their svc_xprt_get reference forever, and
svc_rdma_free() blocks on xpt_ref dropping to zero.
Two close entry points reach this transport. Local teardown runs
svc_rdma_detach() from svc_handle_xprt() -> svc_delete_xprt() ->
xpo_detach() on a worker thread. A remote disconnect arrives at
svc_rdma_cma_handler(), which calls svc_xprt_deferred_close():
that sets XPT_CLOSE and enqueues the transport but does not
access either RDMA waitqueue, so a worker already parked in
svc_rdma_sq_wait() never re-evaluates its predicate. With every
worker parked on this transport, no thread is available to run
the local teardown either, and the wake site there is
unreachable.
Introduce svc_rdma_xprt_deferred_close(), a thin svcrdma wrapper
that calls svc_xprt_deferred_close() and then wakes both
sc_sq_ticket_wait and sc_send_wait. Convert the svcrdma producers
that called svc_xprt_deferred_close() directly:
svc_rdma_cma_handler(), qp_event_handler(),
svc_rdma_post_send_err(), svc_rdma_wc_send(), the sendto drop
path, the rw completion error paths, and the recvfrom flush and
read-list error paths.
Wake both waitqueues from svc_rdma_detach() as well. The
synchronous svc_xprt_close() path (backchannel ENOTCONN, device
removal via svc_rdma_xprt_done) reaches detach without flowing
through svc_xprt_deferred_close() and therefore does not invoke
the new helper.
Fixes: ccc89b9d1ed2 ("svcrdma: Add fair queuing for Send Queue access")
Cc: stable@vger.kernel.org
Assisted-by: kres (claude-opus-4-7)
Signed-off-by: Chris Mason <clm@meta.com>
[ cel: add svc_rdma_xprt_deferred_close() to complete the fix ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f13e900599089b10113ceb36013423f0837c6792 upstream.
When populating a guest_memfd instance with the initial CPUID data for an
SNP guest, acquire a writable pin on the source page as KVM will write back
the "correct" CPUID information if the userspace provided data is rejected
by trusted firmware. Because KVM writes to the source page using a kernel
mapping, pinning for read could result in KVM clobbering read-only memory.
Note, well-behaved VMMs are unlikely to be affected, as CPUID information
is almost always dynamically generated by userspace, i.e. it's unlikely for
the CPUID information to be backed by a read-only mapping.
Fixes: 2a62345b30529 ("KVM: guest_memfd: GUP source pages prior to populating guest memory")
Cc: stable@vger.kernel.org
Signed-off-by: Ackerley Tng <ackerleytng@google.com>
Link: https://patch.msgid.link/20260522-fix-sev-gmem-post-populate-v2-1-3f196bfad5a1@google.com
[sean: rewrite shortlog and changelog, tag for stable@]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a6f0643e4f63cfaa0d5d4a69de4f132eac4b8fe4 upstream.
When CONFIG_BPF_LSM=y is set, BPF inode storage maps
(BPF_MAP_TYPE_INODE_STORAGE) are compiled into the kernel. However,
if the BPF LSM is not explicitly enabled at boot time (e.g. omitted
from the "lsm=" boot parameter), lsm_prepare() is never executed for
the BPF LSM.
Consequently, the BPF inode security blob offset
(bpf_lsm_blob_sizes.lbs_inode) is never initialized and remains at
its default compiled size of 8 bytes instead of being updated to a
valid offset past the reserved struct rcu_head (typically 16 bytes
or more).
When a privileged user creates and updates a BPF_MAP_TYPE_INODE_STORAGE
map, bpf_inode() evaluates inode->i_security + 8. This erroneously
aliases the struct rcu_head.func callback pointer at the beginning
of the inode->i_security blob. During subsequent map element cleanup
or inode destruction, writing NULL to owner_storage clears the queued
RCU callback pointer. When rcu_do_batch() later executes the queued
callback, it attempts an instruction fetch at address 0x0, triggering
an immediate kernel panic.
Fix this by introducing a global bpf_lsm_initialized boolean flag
marked with __ro_after_init. Set this flag to true inside bpf_lsm_init()
when the LSM framework successfully registers the BPF LSM. Gate map
allocation in inode_storage_map_alloc() on this flag, returning
-EOPNOTSUPP if the BPF LSM is in turn uninitialized.
This fail-fast approach prevents userspace from allocating inode
storage maps when the supporting BPF LSM infrastructure is absent,
avoiding zombie map states.
Fixes: 8ea636848aca ("bpf: Implement bpf_local_storage for inodes")
Reported-by: oxsignal <awo@kakao.com>
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/bpf/20260628201103.3624525-1-mattbobrowski@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e187bc02f8fa4226d62814592cf064ee4557c470 upstream.
Ever since idmapped mounts were introduced, inode ownership checks (for
side-channel protection) in mincore() and madvise(MADV_PAGEOUT) were done
against the nop_mnt_idmap, which completely ignores the file's mount's
idmap. This results in odd edgecases like:
1) mount/bind-mount with an idmap userA:userB:1
2) userB runs an owner_or_capable() check on file that is owned by userA
on-disk/in-memory, but owned by userB after idmap translation
3) owner_or_capable() mysteriously fails as the correct idmap wasn't supplied
In the case of mincore/madvise MADV_PAGEOUT, this is usually benign,
because file_permission(file, MAY_WRITE) will probably succeed, as it uses
the proper idmap internally, but it does not need to be the case on e.g a
0444 file where even the owner itself doesn't have permissions to write to
it.
Since this is clearly not trivial to get right, introduce a
file_owner_or_capable() that can carry the correct semantics, and switch
the various users in mm to it.
The issue was found by manual code inspection & an off-list discussion
with Jan Kara.
Link: https://lore.kernel.org/20260625153853.913949-1-pfalcato@suse.de
Fixes: 9caccd41541a ("fs: introduce MOUNT_ATTR_IDMAP")
Signed-off-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner (Amutable) <brauner@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
access
commit ffd017237cfe99e6e5602ab14179b0e6878a0840 upstream.
The page_ext iteration API does not validate if the PFN still belongs to a
valid section while advancing the iterator. When dynamically adding
memory in the hotplug path, it can lead to a NULL pointer dereference
during page_ext_lookup at the boundary of the last valid section when
iterator count equals __pgcount.
The for_each_page_ext() macro calls page_ext_iter_next() as its loop
increment. for_each_page_ext() does a "__page_ext =
page_ext_iter_next(&__iter)" at the end. This causes page_ext_iter_next()
to increment iter->index past __pgcount and call page_ext_lookup(start_pfn
+ __pgcount). During memory hotplug (online), the PFN at start_pfn +
__pgcount may belong to a section that has not yet been initialized,
causing page_ext_lookup() to trigger a NULL pointer dereference.
[ 14.555124][ T846] Call trace:
[ 14.555125][ T846] lookup_page_ext+0x6c/0x108 (P)
[ 14.555127][ T846] page_ext_lookup+0x30/0x3c
[ 14.555129][ T846] __reset_page_owner+0x11c/0x260
[ 14.571201][ T846] __free_pages_ok+0x5e8/0x8e0
[ 14.571204][ T846] __free_pages_core+0x78/0xf0
[ 14.571206][ T846] generic_online_page+0x14/0x24
[ 14.597782][ T846] online_pages+0x178/0x30c
[ 14.597784][ T846] memory_block_change_state+0x284/0x32c
[ 14.597787][ T846] memory_subsys_online+0x4c/0x64
[ 14.597789][ T846] device_online+0x88/0xb0
[ 14.597791][ T846] online_memory_block+0x30/0x40
[ 14.597793][ T846] walk_memory_blocks+0xac/0xe8
[ 14.597794][ T846] add_memory_resource+0x280/0x298
[ 14.656161][ T846] add_memory+0x60/0x98
Move the iteration boundary enforcement inside the iterator functions, so
callers cannot inadvertently access beyond the requested range.
Link: https://lore.kernel.org/20260623-page_ext-v3-1-a89799a5367c@oss.qualcomm.com
Fixes: 9039b9096ea2 ("mm: page_ext: add an iteration API for page extensions")
Signed-off-by: Ketan Kishore <ketan.kishore@oss.qualcomm.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Luiz Capitulino <luizcap@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b48bd16eb9fc57a463a337ca148516cdf3212d61 upstream.
raw_res_spin_unlock_irqrestore() calls raw_res_spin_unlock() and then
restores interrupts, this means preemption is enabled when interrupts
are still disabled (as part of raw_res_spin_unlock()) so this cannot
trigger an actual preemption.
This is inconsistent with other spinlock implementations
(raw_spin_unlock_irqrestore() and bpf_res_spin_unlock_irqrestore()
itself).
Adjust the macro to ensure interrupts are enabled before enabling
preemption, allowing to schedule at that point. Make the same
modification in the error path of raw_res_spin_lock_irqsave().
Fixes: 101acd2e78b1 ("rqspinlock: Add macros for rqspinlock usage")
Cc: stable@vger.kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de> # asm-generic
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/r/20260610090431.32427-1-gmonaco@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0a6070839b1ef276d5b05bedfb787743e140fb17 upstream.
String event fields are not necessarily NUL-terminated, so the filter
predicate functions (filter_pred_string(), filter_pred_strloc() and
filter_pred_strrelloc()) pass the field length to the regex match
callbacks, and the length-aware matchers honour it.
regex_match_glob() was the exception: it ignored the length and called
glob_match(), which scans the string until it hits a NUL byte. Some
string fields are not NUL-terminated. One example is the dynamic char
array of the xfs_* namespace tracepoints, which is copied without a
trailing NUL. For such a field, glob matching reads past the end of
the event field, causing a KASAN slab-out-of-bounds read in
glob_match(), reached via regex_match_glob() and filter_match_preds()
from the xfs_lookup tracepoint.
Add a length-bounded glob_match_len() and use it from regex_match_glob()
so glob matching always stops at the field boundary. The matching loop
is factored into a shared helper so glob_match() keeps its behaviour.
Fixes: 60f1d5e3bac4 ("ftrace: Support full glob matching")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/da1aaf125fc3b63320b0c540fd6afa7c3d5b4f1a.1782836943.git.hhhuang@smu.edu.sg
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Assisted-by: Codex:GPT-5.4
Signed-off-by: Huihui Huang <hhhuang@smu.edu.sg>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6f49f00c981bbb9ef602966f19bfdbef46b681d2 upstream.
On 64-bit kernels, drbg_max_addtl() returns 2**35 bytes. That's too
large, for two reasons:
1. SP800-90A says the maximum limit is 2**35 *bits*, not 2**35 bytes.
So the implemented limit has confused bits and bytes.
2. When drbg_kcapi_hash() calls crypto_shash_update() on the additional
information string, the length is implicitly cast to 'unsigned int'.
That truncates the additional information string to U32_MAX bytes.
Fix the maximum additional information string length to always be
U32_MAX - 1, causing an error to be returned for any longer lengths.
Fixes: 541af946fe13 ("crypto: drbg - SP800-90A Deterministic Random Bit Generator")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ddc4dedb9ba3c8eecbc8c050fffd46d1b7e75c21 upstream.
drbg_cpu_to_be32() is being used to do a plain write to a byte array,
which doesn't have any alignment guarantee. This can cause a misaligned
write. Replace it with the correct function, put_unaligned_be32().
Fixes: 72f3e00dd67e ("crypto: drbg - replace int2byte with cpu_to_be")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f784fcea450617055d2d12eec5b2f6e0e38bf878 upstream.
sensor_hub_input_attr_get_raw_value() is limited to returning a single
32-bit value, which is insufficient for sensors that report data larger
than 32 bits, such as a quaternion with four s16 elements.
Add sensor_hub_input_attr_read_values() that accepts a caller-provided
buffer and accumulates incoming data until the buffer is full. The two
paths are distinguished in sensor_hub_raw_event() by pending.max_raw_size
being non-zero, preserving backward compatibility.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Co-developed-by: Zhang Lixu <lixu.zhang@intel.com>
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 12917f591cea1af36087dba5b9ec888652f0b42a upstream.
hci_abort_conn() read hci_skb_event(hdev->sent_cmd) when a connection
was pending, but hdev->sent_cmd can be NULL while req_status is still
HCI_REQ_PEND, leading to a NULL pointer dereference and a general
protection fault from the hci_rx_work() receive path.
Instead of inspecting hdev->sent_cmd, track the in-flight create
connection command with a new per-connection HCI_CONN_CREATE flag and
route all cancellation through hci_cancel_connect_sync(), which
dispatches to a dedicated per-type cancel function. The create command
is in exactly one of two states: still queued, or in flight. The cancel
function holds cmd_sync_work_lock across the whole decision: the worker
takes this lock to dequeue every entry, so while it is held a queued
command cannot start running and an in-flight command cannot complete
and let the next command become pending. This keeps the flag test and
hci_cmd_sync_cancel() atomic with respect to the worker, so a queued
command is simply dequeued, and an in-flight command owned by this
connection is cancelled without the risk of cancelling an unrelated
command that became pending in the meantime. CIS uses the same flag
mechanism via HCI_CONN_CREATE_CIS but cannot be dequeued per-connection.
hci_acl_create_conn_sync() and hci_le_create_conn_sync() clear
HCI_CONN_CREATE after the create command completes, but the command
status handler can free conn via hci_conn_del() (for example when the
controller rejects the connection) while the worker is still blocked on
the connection complete event. Hold a reference on conn across the
create command so the flag can be cleared without a use-after-free.
Fixes: a13f316e90fd ("Bluetooth: hci_conn: Consolidate code for aborting connections")
Cc: stable@vger.kernel.org
Suggested-by: XIAO WU <xiaowu.417@qq.com>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Siwei Zhang <oss@fourdim.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6c5dcab95f4cd42a1648739ec9300fbb4b1a021f upstream.
No driver supports for IPIP tunnels yet, give up early on setting up the
hardware offload for this scenario.
This patch adds a stub that can be enhanced to add more configuration
that are currently not supported. As of now, the offload work is
enqueued to the worker, then ignored if the hardware offload
configuration is not supported.
Check the NF_FLOW_HW flag to know if this entry was already tried once
to be offloaded so this is not retried on refresh when unsupported. Move
NF_FLOW_HW flag check to nf_flow_offload_add(). If this NF_FLOW_HW flag
is unset the _del and _stats variants are never called.
This can be updated later on to skip hardware offload work to be queued
in case hardware offload does not support it.
Fixes: d98103575dcd ("netfilter: flowtable: Add IP6IP6 rx sw acceleration")
Fixes: ab427db17885 ("netfilter: flowtable: Add IPIP rx sw acceleration")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Reported-by: Zhengyang Chen <chzhengyang2023@lzu.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b66774b48dd98f07254951f74ea6f513efe7ff8b upstream.
l2cap_chan_timeout() runs asynchronously and accesses chan->conn. If
the connection is torn down while the timer is running or pending,
chan->conn can be freed, leading to a use-after-free when the timer
worker attempts to lock conn->lock:
| BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:112 [inline]
| BUG: KASAN: slab-use-after-free in atomic_long_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:4456 [inline]
| BUG: KASAN: slab-use-after-free in __mutex_trylock_fast kernel/locking/mutex.c:161 [inline]
| BUG: KASAN: slab-use-after-free in mutex_lock+0x4f/0xa0 kernel/locking/mutex.c:318
| Write of size 8 at addr ffff8881298d9550 by task kworker/2:1/83
|
| CPU: 2 UID: 0 PID: 83 Comm: kworker/2:1 Not tainted 7.1.0-rc6-next-20260601-dirty #6 PREEMPT(full)
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
| Workqueue: events l2cap_chan_timeout
| Call Trace:
| <TASK>
| instrument_atomic_read_write include/linux/instrumented.h:112 [inline]
| atomic_long_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:4456 [inline]
| __mutex_trylock_fast kernel/locking/mutex.c:161 [inline]
| mutex_lock+0x4f/0xa0 kernel/locking/mutex.c:318
| l2cap_chan_timeout+0x5d/0x1b0 net/bluetooth/l2cap_core.c:422
| process_one_work kernel/workqueue.c:3326 [inline]
| process_scheduled_works+0x7c8/0xfb0 kernel/workqueue.c:3409
| worker_thread+0x8a9/0xcf0 kernel/workqueue.c:3490
| kthread+0x346/0x430 kernel/kthread.c:436
| ret_from_fork+0x1a3/0x470 arch/x86/kernel/process.c:158
| ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
| </TASK>
|
| Allocated by task 320:
| l2cap_conn_add+0xa7/0x820 net/bluetooth/l2cap_core.c:7075
| l2cap_connect_cfm+0xdb/0xd70 net/bluetooth/l2cap_core.c:7452
| hci_connect_cfm include/net/bluetooth/hci_core.h:2139 [inline]
| hci_remote_features_evt+0x52f/0x9f0 net/bluetooth/hci_event.c:3760
| hci_event_func net/bluetooth/hci_event.c:7796 [inline]
| hci_event_packet+0x561/0xa70 net/bluetooth/hci_event.c:7847
| hci_rx_work+0x370/0x890 net/bluetooth/hci_core.c:4040
| process_one_work kernel/workqueue.c:3326 [inline]
| process_scheduled_works+0x7c8/0xfb0 kernel/workqueue.c:3409
| worker_thread+0x8a9/0xcf0 kernel/workqueue.c:3490
| kthread+0x346/0x430 kernel/kthread.c:436
| ret_from_fork+0x1a3/0x470 arch/x86/kernel/process.c:158
| ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
|
| Freed by task 322:
| hci_disconn_cfm include/net/bluetooth/hci_core.h:2154 [inline]
| hci_conn_hash_flush+0x101/0x1f0 net/bluetooth/hci_conn.c:2736
| hci_dev_close_sync+0x889/0xde0 net/bluetooth/hci_sync.c:5405
| hci_dev_do_close net/bluetooth/hci_core.c:502 [inline]
| hci_unregister_dev+0x1f7/0x370 net/bluetooth/hci_core.c:2679
| vhci_release+0x12a/0x180 drivers/bluetooth/hci_vhci.c:690
| __fput+0x369/0x890 fs/file_table.c:510
| task_work_run+0x160/0x1d0 kernel/task_work.c:233
| get_signal+0xf5b/0x1120 kernel/signal.c:2810
| arch_do_signal_or_restart+0x4d/0x600 arch/x86/kernel/signal.c:337
| __exit_to_user_mode_loop kernel/entry/common.c:64 [inline]
| exit_to_user_mode_loop+0x85/0x510 kernel/entry/common.c:98
| do_syscall_64+0x263/0x3d0 arch/x86/entry/syscall_64.c:100
| entry_SYSCALL_64_after_hwframe+0x77/0x7f
|
| The buggy address belongs to the object at ffff8881298d9400
| which belongs to the cache kmalloc-512 of size 512
| The buggy address is located 336 bytes inside of
| freed 512-byte region [ffff8881298d9400, ffff8881298d9600)
Fix it by having chan->conn hold a reference to l2cap_conn (via
l2cap_conn_get) when the channel is added to the connection, and
releasing it in the channel destructor. This ensures the l2cap_conn
remains alive as long as the channel exists.
A new FLAG_DEL channel flag is introduced to indicate that the channel
has been deleted from its connection. l2cap_chan_del() atomically sets
this flag using test_and_set_bit() instead of setting chan->conn to
NULL. All asynchronous workers (l2cap_chan_timeout, l2cap_ack_timeout,
l2cap_monitor_timeout, l2cap_retrans_timeout) and l2cap_chan_send()
check FLAG_DEL to determine whether the channel has been torn down,
rather than testing chan->conn for NULL.
Fixes: 8c8e620467a7 ("Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen()")
Cc: <stable@vger.kernel.org>
Cc: Siwei Zhang <oss@fourdim.xyz>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Assisted-by: Gemini:gemini-3.1-pro-preview
Reported-by: https://sashiko.dev/#/patchset/20260521021249.3258069-1-oss%40fourdim.xyz
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 35d4a3cf70a855b50e53189ac2f8463e20a02046 upstream.
Fix three issues in damon_hot_score() that comes from wrong handling of
extreme (zero or too high) monitoring intervals user setup.
When the user sets sampling interval zero, damon_max_nr_accesses(), which
is called from damon_hot_score(), causes a divide-by-zero. Needless to
say, it is a problem.
When the user sets the aggregation interval zero, the function returns
zero. It is wrong, since the real maximum nr_acceses in the setup should
be one. Worse yet, it can cause another divide-by-zero from its caller,
damon_hot_score(), since it uses damon_max_nr_accesses() return value as a
denominator.
When the user sets the aggregation interval very high, damon_hot_score()
could return a value out of [0, DAMOS_MAX_SCORE] range. Since the return
value is used as an index to the regions_score_histogram array, which is
DAMOS_MAX_SCORE+1 size, it causes out of bounds array access.
The issues can be relatively easily reproduced like below. The sysfs
write permission is required, though.
# ./damo start --damos_action lru_prio --damos_quota_space 100M \
--damos_quota_interval 1s
# cd /sys/kernel/mm/damon/admin/kdamonds/0
# echo 0 > contexts/0/monitoring_attrs/intervals/sample_us
# echo 0 > contexts/0/monitoring_attrs/intervals/aggr_us
# echo commit > state
# dmesg
[...]
[ 131.329762] Oops: divide error: 0000 [#1] SMP NOPTI
[...]
[ 131.336089] RIP: 0010:damon_hot_score+0x27/0xd0
[...]
Fix the divide-by-zero intervals problems by explicitly handling the zero
intervals in damon_max_nr_accesses(). Fix the out-of-bound array access
by applying [0, DAMOS_MAX_SCORE] bounds before returning from
damon_hot_score().
The issue was discovered [1] by Sashiko.
Link: https://lore.kernel.org/20260623135834.67189-1-sj@kernel.org
Link: https://lore.kernel.org/20260619202459.145010-1-sj@kernel.org [1]
Fixes: 198f0f4c58b9 ("mm/damon/vaddr,paddr: support pageout prioritization")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 5.16.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8bc4d43bccbd60efe85d0a44d5bf41762f2f0c30 upstream.
Commit 51e547e8c89c ("tcp: Free TCP-AO/TCP-MD5 info/keys without RCU")
removed the call_rcu() callback from tcp_ao_destroy_sock(), arguing that
"the destruction of info/keys is delayed until the socket destructor"
and therefore "no one can discover it anymore".
That argument does not hold for the call site in tcp_connect()
(net/ipv4/tcp_output.c:4327-4332). At that point the socket is in
TCP_SYN_SENT, has already been inserted into the inet ehash by
inet_hash_connect() in tcp_v4_connect(), and is therefore very much
discoverable: any softirq running tcp_v4_rcv() on another CPU can take
the socket out of the ehash, walk into tcp_inbound_hash(), and load
tp->ao_info via implicit RCU before bh_lock_sock_nested() is taken on
the destroying CPU.
The reader path then enters __tcp_ao_do_lookup() (net/ipv4/tcp_ao.c:208)
which re-loads tp->ao_info via rcu_dereference_check(); the re-load can
still observe the (about-to-be-freed) pointer because there is no
synchronize_rcu() between rcu_assign_pointer(tp->ao_info, NULL) and
tcp_ao_info_free() in tcp_ao_destroy_sock(). The captured pointer is
then walked at line 223:
hlist_for_each_entry_rcu(key, &ao->head, node, ...)
The writer's synchronous kfree() is free to complete between the line
218 re-fetch and the line 223 hlist iteration. The slab is reused
(or simply LIST_POISON1-stamped if not yet reused) and the iteration
walks attacker-controlled or poison memory in softirq context.
Reproducer (no debug shim, stock x86_64 v7.1-rc2 SMP+KASAN, QEMU+KVM):
an unprivileged uid=1000 process inside CLONE_NEWUSER|CLONE_NEWNET
installs TCP_MD5SIG + TCP_AO_ADD_KEY on a TCP socket, sprays forged
TCP-AO segments toward its eventual 4-tuple via raw sockets, then
calls connect(). The md5-wins reconciliation in tcp_connect() fires
tcp_ao_destroy_sock(); the softirq backlog reader on the loopback
NAPI path crashes on the freed ao->head.first walk:
Oops: general protection fault, probably for non-canonical
address 0xfbd59c000000002f
KASAN: maybe wild-memory-access in range
[0xdead000000000178-0xdead00000000017f]
CPU: 0 UID: 1000 PID: 100 Comm: repro_userns
RIP: 0010:__tcp_ao_do_lookup+0x107/0x1c0
Call Trace: <IRQ>
__tcp_ao_do_lookup+0x107/0x1c0
tcp_ao_inbound_lookup.constprop.0+0x12a/0x200
tcp_inbound_ao_hash+0x5ea/0x1520
tcp_inbound_hash+0x7ce/0x1240
tcp_v4_rcv+0x1e7a/0x3e10
...
Restore the RCU grace period: re-add struct rcu_head to tcp_ao_info
and replace the synchronous tcp_ao_info_free() with a call_rcu()
callback. Readers that captured tp->ao_info before rcu_assign_pointer
NULLed it now see the object remain valid until rcu_read_unlock().
With the patch applied the reproducer runs cleanly for 2000 iterations
on the same kernel build.
Fixes: 51e547e8c89c ("tcp: Free TCP-AO/TCP-MD5 info/keys without RCU")
Cc: stable@vger.kernel.org # v6.18+
Reviewed-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20260625-tcp-md5-connect-v3-1-1fd313d6c1e0@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e73638e55f861758d49f14d7bb5dba3035981cd7 upstream.
Bitfield operations are not atomic, they use a read-modify-write
pattern, therefore we should be careful not to pack bitfields that
can be concurrently updated into the same storage unit.
This split takes a binary approach: flags that are only modified
pre/post open/close remain bitfields, flags modified from user
action, including actions that reach across to another device (ex.
reset) use dedicated storage units.
Note that the virq_disabled and bardirty flags are relocated to fill
an existing hole in the structure.
Bitfield justifications:
has_dyn_msix: written only in vfio_pci_core_enable()
pci_2_3: written only in vfio_pci_core_enable()
reset_works: written only in vfio_pci_core_enable()
extended_caps: written only in vfio_cap_len() under vfio_config_init()
has_vga: written only in vfio_pci_core_enable()
nointx: written only in vfio_pci_core_enable()
needs_pm_restore: written only in vfio_pci_probe_power_state()
disable_idle_d3: written only at .init in vfio_pci_core_init_dev()
Dedicated storage units:
virq_disabled: written by guest INTx command writes in
vfio_basic_config_write() while the device is open
bardirty: written by guest BAR writes in vfio_basic_config_write()
while the device is open
pm_intx_masked: written in the runtime-PM suspend path.
pm_runtime_engaged: written by low-power feature entry/exit paths
needs_reset: set in vfio_pci_core_disable() and cleared for devices in
the set by vfio_pci_dev_set_try_reset()
sriov_active: written by vfio_pci_core_sriov_configure() via sysfs
sriov_numvfs while bound.
Fixes: 9cd0f6d5cbb6 ("vfio/pci: Use bitfield for struct vfio_pci_core_device flags")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-4-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4575e9aac5336d1365138c0284773bf8da4b1fa3 upstream.
When disable_idle_d3 was introduced in vfio-pci, it directly manipulated
the device power state with pci_set_power_state(). There were no
refcounts to maintain or balanced operations, we could unconditionally
bring the device to D0 and conditionally move it to D3hot. Therefore
the module parameter was made writable.
Later, in commit c61302aa48f7 ("vfio/pci: Move module parameters to
vfio_pci.c"), as part of the vfio-pci-core split, the writable aspect
of the module parameter was nullified. The parameter value could still
be changed through sysfs, but the vfio-pci driver latched the values
into vfio-pci-core globals at module init. Loading the vfio-pci module,
or unloading and reloading, with non-default or different values could
change the globals relative to existing devices bound to vfio-pci
variant drivers.
Runtime PM was introduced in commit 7ab5e10eda02 ("vfio/pci: Move the
unused device into low power state with runtime PM"), which marks the
point where power states became refcounted. PM get and put operations
need to be balanced, but the same module operations noted above can
change the global variables relative to those devices already bound to
vfio-pci variant drivers. This introduces a window where PM operations
can now become unbalanced.
To resolve this with a narrow footprint for stable backports, the
disable_idle_d3 flag is latched into the vfio_pci_core_device at the
time of initialization, such that the device always operates with a
consistent value.
NB. vfio_pci_dev_set_try_reset() now unconditionally raises the
runtime PM usage count around bus reset to account for disable_idle_d3
becoming a per-device rather than global flag. When this flag is set,
the additional get/put pair is harmless and allows continued use of the
shared vfio_pci_dev_set_pm_runtime_get() helper.
Fixes: 7ab5e10eda02 ("vfio/pci: Move the unused device into low power state with runtime PM")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Alex Williamson <alex.williamson@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260615191241.688297-2-alex.williamson@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 40ef3edf151e184d021917a5c4c771cc0870844a upstream.
The current implementation uses pci_num_vf() while holding the
memory_lock to prevent changing the power state of a PF when
VFs are enabled. This creates a lockdep circular dependency
warning because memory_lock is held during device probing.
[ 286.997167] ======================================================
[ 287.003363] WARNING: possible circular locking dependency detected
[ 287.009562] 7.0.0-dbg-DEV #3 Tainted: G S
[ 287.015074] ------------------------------------------------------
[ 287.021270] vfio_pci_sriov_/18636 is trying to acquire lock:
[ 287.026942] ff45bea2294d4968 (&vdev->memory_lock){+.+.}-{4:4}, at:
vfio_pci_core_runtime_resume+0x1f/0xa0
[ 287.036530]
[ 287.036530] but task is already holding lock:
[ 287.042383] ff45bea3a96b8230 (&new_dev_set->lock){+.+.}-{4:4}, at:
vfio_group_fops_unl_ioctl+0x44d/0x7b0
[ 287.051879]
[ 287.051879] which lock already depends on the new lock.
[ 287.051879]
[ 287.060070]
[ 287.060070] the existing dependency chain (in reverse order) is:
[ 287.067568]
[ 287.067568] -> #2 (&new_dev_set->lock){+.+.}-{4:4}:
[ 287.073941] __mutex_lock+0x92/0xb80
[ 287.078058] vfio_assign_device_set+0x66/0x1b0
[ 287.083042] vfio_pci_core_register_device+0xd1/0x2a0
[ 287.088638] vfio_pci_probe+0xd2/0x100
[ 287.092933] local_pci_probe_callback+0x4d/0xa0
[ 287.098001] process_scheduled_works+0x2ca/0x680
[ 287.103158] worker_thread+0x1e8/0x2f0
[ 287.107452] kthread+0x10c/0x140
[ 287.111230] ret_from_fork+0x18e/0x360
[ 287.115519] ret_from_fork_asm+0x1a/0x30
[ 287.119983]
[ 287.119983] -> #1 ((work_completion)(&arg.work)){+.+.}-{0:0}:
[ 287.127219] __flush_work+0x345/0x490
[ 287.131429] pci_device_probe+0x2e3/0x490
[ 287.135979] really_probe+0x1f9/0x4e0
[ 287.140180] __driver_probe_device+0x77/0x100
[ 287.145079] driver_probe_device+0x1e/0x110
[ 287.149803] __device_attach_driver+0xe3/0x170
[ 287.154789] bus_for_each_drv+0x125/0x150
[ 287.159346] __device_attach+0xca/0x1a0
[ 287.163720] device_initial_probe+0x34/0x50
[ 287.168445] pci_bus_add_device+0x6e/0x90
[ 287.172995] pci_iov_add_virtfn+0x3c9/0x3e0
[ 287.177719] sriov_add_vfs+0x2c/0x60
[ 287.181838] sriov_enable+0x306/0x4a0
[ 287.186038] vfio_pci_core_sriov_configure+0x184/0x220
[ 287.191715] sriov_numvfs_store+0xd9/0x1c0
[ 287.196351] kernfs_fop_write_iter+0x13f/0x1d0
[ 287.201338] vfs_write+0x2be/0x3b0
[ 287.205286] ksys_write+0x73/0x100
[ 287.209233] do_syscall_64+0x14d/0x750
[ 287.213529] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 287.219120]
[ 287.219120] -> #0 (&vdev->memory_lock){+.+.}-{4:4}:
[ 287.225491] __lock_acquire+0x14c6/0x2800
[ 287.230048] lock_acquire+0xd3/0x2f0
[ 287.234168] down_write+0x3a/0xc0
[ 287.238019] vfio_pci_core_runtime_resume+0x1f/0xa0
[ 287.243436] __rpm_callback+0x8c/0x310
[ 287.247730] rpm_resume+0x529/0x6f0
[ 287.251765] __pm_runtime_resume+0x68/0x90
[ 287.256402] vfio_pci_core_enable+0x44/0x310
[ 287.261216] vfio_pci_open_device+0x1c/0x80
[ 287.265947] vfio_df_open+0x10f/0x150
[ 287.270148] vfio_group_fops_unl_ioctl+0x4a4/0x7b0
[ 287.275476] __se_sys_ioctl+0x71/0xc0
[ 287.279679] do_syscall_64+0x14d/0x750
[ 287.283975] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 287.289559]
[ 287.289559] other info that might help us debug this:
[ 287.289559]
[ 287.297582] Chain exists of:
[ 287.297582] &vdev->memory_lock --> (work_completion)(&arg.work)
--> &new_dev_set->lock
[ 287.297582]
[ 287.310023] Possible unsafe locking scenario:
[ 287.310023]
[ 287.315961] CPU0 CPU1
[ 287.320510] ---- ----
[ 287.325059] lock(&new_dev_set->lock);
[ 287.328917]
lock((work_completion)(&arg.work));
[ 287.336153] lock(&new_dev_set->lock);
[ 287.342523] lock(&vdev->memory_lock);
[ 287.346382]
[ 287.346382] *** DEADLOCK ***
[ 287.346382]
[ 287.352315] 2 locks held by vfio_pci_sriov_/18636:
[ 287.357125] #0: ff45bea208ed3e18 (&group->group_lock){+.+.}-{4:4},
at: vfio_group_fops_unl_ioctl+0x3e3/0x7b0
[ 287.367048] #1: ff45bea3a96b8230 (&new_dev_set->lock){+.+.}-{4:4},
at: vfio_group_fops_unl_ioctl+0x44d/0x7b0
[ 287.376976]
[ 287.376976] stack backtrace:
[ 287.381353] CPU: 191 UID: 0 PID: 18636 Comm: vfio_pci_sriov_
Tainted: G S 7.0.0-dbg-DEV #3 PREEMPTLAZY
[ 287.381355] Tainted: [S]=CPU_OUT_OF_SPEC
[ 287.381356] Call Trace:
[ 287.381357] <TASK>
[ 287.381358] dump_stack_lvl+0x54/0x70
[ 287.381361] print_circular_bug+0x2e1/0x300
[ 287.381363] check_noncircular+0xf9/0x120
[ 287.381364] ? __lock_acquire+0x5b4/0x2800
[ 287.381366] __lock_acquire+0x14c6/0x2800
[ 287.381368] ? pci_mmcfg_read+0x4f/0x220
[ 287.381370] ? pci_mmcfg_write+0x57/0x220
[ 287.381371] ? lock_acquire+0xd3/0x2f0
[ 287.381373] ? pci_mmcfg_write+0x57/0x220
[ 287.381374] ? lock_release+0xef/0x360
[ 287.381376] ? vfio_pci_core_runtime_resume+0x1f/0xa0
[ 287.381377] lock_acquire+0xd3/0x2f0
[ 287.381378] ? vfio_pci_core_runtime_resume+0x1f/0xa0
[ 287.381379] ? lock_is_held_type+0x76/0x100
[ 287.381382] down_write+0x3a/0xc0
[ 287.381382] ? vfio_pci_core_runtime_resume+0x1f/0xa0
[ 287.381383] vfio_pci_core_runtime_resume+0x1f/0xa0
[ 287.381384] ? __pfx_pci_pm_runtime_resume+0x10/0x10
[ 287.381385] __rpm_callback+0x8c/0x310
[ 287.381386] ? ktime_get_mono_fast_ns+0x3d/0xb0
[ 287.381389] ? __pfx_pci_pm_runtime_resume+0x10/0x10
[ 287.381390] rpm_resume+0x529/0x6f0
[ 287.381392] ? lock_is_held_type+0x76/0x100
[ 287.381394] __pm_runtime_resume+0x68/0x90
[ 287.381396] vfio_pci_core_enable+0x44/0x310
[ 287.381398] vfio_pci_open_device+0x1c/0x80
[ 287.381399] vfio_df_open+0x10f/0x150
[ 287.381401] vfio_group_fops_unl_ioctl+0x4a4/0x7b0
[ 287.381402] __se_sys_ioctl+0x71/0xc0
[ 287.381404] do_syscall_64+0x14d/0x750
[ 287.381405] ? entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 287.381406] ? trace_irq_disable+0x25/0xd0
[ 287.381409] entry_SYSCALL_64_after_hwframe+0x77/0x7f
Introduce a private flag 'sriov_active' in the vfio_pci_core_device
struct. This allows the driver to track the SR-IOV power state requirement
without relying on pci_num_vf() while holding the memory_lock. The lock is
now only held to set the flag and ensure the device is in D0, after which
pci_enable_sriov() can be called without the lock.
Fixes: f4162eb1e2fc ("vfio/pci: Change the PF power state to D0 before enabling VFs")
Cc: stable@vger.kernel.org
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Suggested-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20260514173449.3282188-1-rananta@google.com
[promote bitfield to plain bool to avoid storage-unit races]
Signed-off-by: Alex Williamson <alex@shazbot.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 958e4450e961d75bd9d8f5bfe245fb15bc78e02a upstream.
Due to a hardware defect, for Loongson PCI HDMI devices with a reversion
ID of 2, the pin sense status must be determined via the ELD.
Add a codec flag, eld_jack_detect, to indicate this case, and do special
handlings in read_pin_sense().
Cc: stable@vger.kernel.org
Signed-off-by: Baoqi Zhang <zhangbaoqi@loongson.cn>
Signed-off-by: Haowei Zheng <zhenghaowei@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20260527140841.3407183-1-chenhuacai@loongson.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0bb99f2cfaae6822d734d69722de30af823efdf3 upstream.
Currently predictor flush on memory reuse is done for all BPF JIT
allocations, but only cBPF programs can be loaded by an unprivileged user.
eBPF is privileged by default, and flushing predictors for all CPUs on
every eBPF reuse penalizes the common case for no security benefit.
eBPF allocations can be frequent on busy systems, only flush predictors
for cBPF programs. Trampoline and dispatcher allocations also skip the
flush as they are eBPF-only.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 96cce16e26dd02a8678f1e87f88a4b5cdb63b995 upstream.
The BPF JIT allocator packs many small programs into larger executable
allocations and reuses space within those allocations as programs are
loaded and freed. When fresh code is written into space that a previous
program occupied, an indirect jump into the new program can reuse a branch
prediction left behind by the old one.
Flush the indirect branch predictors before reusing JIT memory so that
indirect jumps into a newly written program don't reuse predictions from an
old program that occupied the same space.
Introduce bpf_arch_pred_flush_enabled static key and bpf_arch_pred_flush
static call for flushing the branch predictors on JIT memory reuse.
Architectures that need a flush, can update it to a predictor flush
function. By default, its a NOP and does not emit any CALL.
Allocations larger than a pack are not covered by this flush. That is safe
because cBPF programs (the unprivileged attack surface) are bounded well
below a pack size. Issue a warning if this assumption is ever violated
while the flush is active.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 7b5f5865fb11e60edd03c5e063e2d228b7062317 upstream.
Since the @GFP parameter in kmalloc_obj() etc. is now optional, change
the kernel-doc to indicate that it is optional. This avoids kernel-doc
warnings:
WARNING: include/linux/slab.h:1101 Excess function parameter 'GFP' description in 'kmalloc_obj'
WARNING: include/linux/slab.h:1113 Excess function parameter 'GFP' description in 'kmalloc_objs'
WARNING: include/linux/slab.h:1128 Excess function parameter 'GFP' description in 'kmalloc_flex'
Fixes: e19e1b480ac7 ("add default_gfp() helper macro and use it in the new *alloc_obj() helpers")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Harry Yoo (Oracle) <harry@kernel.org>
Link: https://patch.msgid.link/20260617163125.2716279-1-rdunlap@infradead.org
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ef057cbf825e03b63f6edf5980f96abf3c53089d upstream.
When recovering hugepages in the shadow MMU, verify that the base gfn of
the shadow page is actually contained within the target memslot, *before*
querying the max mapping level given the shadow page's gfn. Failure to
pre-check the validity of the gfn can lead to an out-of-bounds access to
the slot's lpage_info (which typically manifests as a host #PF because the
lpage_info is vmalloc'd) if the guest creates a hugepage mapping (in its
PTEs) that extends "below" the bounds of a memslot.
When faulting in memory for a guest, and the size of the guest mapping is
greater than KVM's (current) max mapping, then KVM will create a "direct"
shadow page (direct in that there are no gPTEs to shadow, and so the target
gfn is a direct calculation given the base gfn of the shadow page). The
hugepage recovery flow looks for such direct shadow pages, as forcing 4KiB
mappings when dirty logging generates the guest > host mapping size case.
When the 4KiB restriction is lifted, then KVM can replace the shadow page
with a hugepage.
But if KVM originally used a smaller mapping than the guest because the
range of memory covered by the guest hugepage exceeds the bounds of a
memslot, then KVM will link a direct shadow page with a gfn that is outside
the bounds of the memslot being used to fault in memory. The rmap entry
added for the leaf mapping is correct and within bounds, but the gfn of the
leaf SPTE's parent shadow page will be out of bounds.
BUG: unable to handle page fault for address: ffffc90000806ffc
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 100000067 P4D 100000067 PUD 1002a7067 PMD 10612f067 PTE 0
Oops: Oops: 0000 [#1] SMP
CPU: 13 UID: 1000 PID: 757 Comm: mmu_stress_test Not tainted 7.1.0-rc1-48ce1e26eace-x86_pir_to_irr_comments-vm #341 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_mmu_max_mapping_level+0x79/0x2b0 [kvm]
Call Trace:
<TASK>
kvm_mmu_recover_huge_pages+0x21b/0x320 [kvm]
kvm_set_memslot+0x1ee/0x590 [kvm]
kvm_set_memory_region.part.0+0x3a1/0x4d0 [kvm]
kvm_vm_ioctl+0x9bf/0x15d0 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb7/0xbb0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f21c0f1a9bf
</TASK>
Don't bother pre-checking the bounds of the potential hugepage, i.e. don't
check that e.g. sp->gfn + KVM_PAGES_PER_HPAGE(sp->role.level + 1) is also
within the memslot, as the checks performed by kvm_mmu_max_mapping_level()
are a superset of the basic bounds checks. I.e. pre-checking the full
range would be a dubious micro-optimization.
Fixes: 9eba50f8d7fc ("KVM: x86/mmu: Consult max mapping level when zapping collapsible SPTEs")
Cc: stable@vger.kernel.org
Cc: David Matlack <dmatlack@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Alexander Bulekov <bkov@amazon.com>
Cc: Fred Griffoul <fgriffo@amazon.co.uk>
Cc: Alexander Graf <graf@amazon.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Filippo Sironi <sironi@amazon.de>
Cc: Ivan Orlov <iorlov@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 846c499a65816d13f1186e3090e825e8bb8bcb8b upstream.
f2fs_recover_orphan_inodes() trusts the orphan block entry_count when
replaying orphan inodes from the checkpoint pack. A corrupted entry_count
larger than F2FS_ORPHANS_PER_BLOCK makes the recovery loop read past the
ino[] array and interpret footer or following data as inode numbers.
On a crafted image, mounting an unpatched kernel can drive orphan recovery
into f2fs_bug_on() and panic the kernel. Validate entry_count before
consuming entries so corrupted checkpoint data fails the mount with
-EFSCORRUPTED and requests fsck instead.
Set ERROR_INCONSISTENT_ORPHAN as well, so the corruption reason can be
recorded in the superblock s_errors[] field. This gives fsck a persistent
hint even though mount-time orphan recovery failure may leave no chance to
persist SBI_NEED_FSCK through a checkpoint.
Cc: stable@kernel.org
Fixes: 127e670abfa7 ("f2fs: add checkpoint operations")
Signed-off-by: Wenjie Qi <qiwenjie@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cc7a9f6e57c4f71e8e1fee3274b1ae8770f2a743 upstream.
The VMA flags bitmap is a single word today: NUM_VMA_FLAG_BITS is
BITS_PER_LONG, so on 32-bit vma_flags_t holds only 32 bits. (The bitmap
type exists so this can grow past BITS_PER_LONG later; until it does,
anything declared above the first word is out of range on 32-bit.) The bit
enum nevertheless declares some bits unconditionally above BITS_PER_LONG
-- VMA_UFFD_MINOR_BIT is 41, with VM_UFFD_MINOR == VM_NONE on 32-bit so no
VMA actually carries the bit.
__VMA_UFFD_FLAGS feeds VMA_UFFD_MINOR_BIT to mk_vma_flags()
unconditionally. On 32-bit that becomes __set_bit(41, &one_long), a write
one word past the end of the single-word bitmap. The compiler folds the
out-of-bounds store with wraparound (1UL << (41 % 32) == bit 9) into the
first word; bit 9 is already in __VMA_UFFD_FLAGS so the mask happens to
come out right today, but it is an out-of-bounds write all the same, and
any high-numbered bit whose mod-BITS_PER_LONG position is otherwise unused
would silently OR an extra bit into the mask.
Rather than feed bit numbers that may not exist on the current build to
mk_vma_flags(), build the mask from whole per-mode masks that collapse to
EMPTY_VMA_FLAGS when their feature is unavailable. Add
mk_vma_flags_from_masks() for that, and define VMA_UFFD_MISSING / _WP /
_MINOR alongside the VM_UFFD_* flags, gating VMA_UFFD_MINOR on the same
config as VM_UFFD_MINOR (which implies 64BIT, where bit 41 fits). An
out-of-range bit is then never materialised, on any arch, and the in-range
fast path stays a compile-time constant.
Link: https://lore.kernel.org/20260529172331.356655-7-kas@kernel.org
Fixes: 9ea35a25d51b ("mm: introduce VMA flags bitmap type")
Signed-off-by: Kiryl Shutsemau <kas@kernel.org>
Reported-by: Sashiko AI review <sashiko-bot@kernel.org>
Suggested-by: Lorenzo Stoakes <ljs@kernel.org>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Assisted-by: Claude:claude-opus-4-8
Cc: David Hildenbrand <david@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fd15b457a86939c38aa12116adabd8ff686c5e51 upstream.
A: request_key() B: KEYCTL_INSTANTIATE_IOV
================ =========================
create auth key
store rka in auth key
wait for helper
get auth key
load rka from auth key
copy user payload
sleep on #PF
helper completed
detach and free rka
destroy auth key
wake up
use rka->target_key
**USE-AFTER-FREE**
Give request_key_auth payloads a refcount. Take a payload reference while
authkey->sem stabilizes the payload and revocation state. Hold that
reference across the instantiate and reject paths. Drop the auth key
owning reference from revoke and destroy.
[jarkko: Replaced the first two paragraphs of text with an actual
concurrency scenario.]
Cc: stable@vger.kernel.org # v5.10+
Fixes: b5f545c880a2 ("[PATCH] keys: Permit running process to instantiate keys")
Reported-by: Shaomin Chen <eeesssooo020@gmail.com>
Closes: https://lore.kernel.org/r/20260519144403.436694-1-eeesssooo020@gmail.com
Signed-off-by: Shaomin Chen <eeesssooo020@gmail.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 94bfc7f3b0c7c33331ba4ff6cc64ff309dfcbce8 upstream.
While testing randconfig builds on s390, I came across a link failure with
CONFIG_DMA_SHARED_BUFFER disabled:
ERROR: modpost: "dma_buf_put" [drivers/iommu/iommufd/iommufd.ko] undefined!
The problem here is that IS_ERR() is not inlined and dead code elimination
fails as a consequence.
The err.h helpers all turn into a trivial assignment of a bit mask and
should never result in a function call, so force them to always be inline.
This should generally result in better object code aside from avoiding
the link failure above.
Link: https://lore.kernel.org/20260526101851.2495110-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Tamir Duberstein <tamird@kernel.org>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Ansuel Smith <ansuelsmth@gmail.com>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fad156c2af227f42ca796cbb20ddc354a6dd9932 upstream.
blk_time_get_ns() caches ktime_get_ns() in current->plug->cur_ktime
and marks the task with PF_BLOCK_TS. That cache is only valid while the
task keeps running; if the task is switched out, wall-clock time
advances and the cached value must not be reused when the task runs again.
The existing invalidation covers explicit plug flushes through
__blk_flush_plug(), and the schedule() / rtmutex paths through
sched_update_worker(). It does not cover in-kernel preemption paths such
as preempt_schedule(), preempt_schedule_notrace(), and
preempt_schedule_irq(), which enter __schedule(SM_PREEMPT) directly and
return without calling sched_update_worker().
As a result, a task preempted while holding a plug with PF_BLOCK_TS set
can reuse a stale plug->cur_ktime after it is scheduled back in. blk-iocost
then consumes that stale timestamp through ioc_now(), producing stale vnow
values for throttle decisions, and through ioc_rqos_done(), inflating
on-queue time and feeding false missed-QoS samples into vrate
adjustment.
Move the schedule-side invalidation to finish_task_switch(), which runs
for the scheduled-in task after every actual context switch regardless
of which schedule entry point was used. Keep __blk_flush_plug() as the
explicit flush/finish-plug invalidation path, and remove only the
PF_BLOCK_TS handling from sched_update_worker().
Fixes: 06b23f92af87 ("block: update cached timestamp post schedule/preemption")
Cc: stable@vger.kernel.org
Signed-off-by: Usama Arif <usama.arif@linux.dev>
Link: https://patch.msgid.link/20260616141604.328820-3-usama.arif@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0ba76b19fd4c7256787eab0283c759b18eb76876 upstream.
The first device on a PCI root bus determines whether the host bridge is
whitelisted for P2PDMA. All Intel Xeon chips since Ice Lake (ICX, 2021)
expose a device with ID 0x09a2 as first device. It is loosely associated
with the IOMMU. All these Xeon chips support P2PDMA, so since the addition
of the device with commit feaea1fe8b36 ("PCI/P2PDMA: Add Intel 3rd Gen
Intel Xeon Scalable Processors to whitelist"), P2PDMA has been allowed on
all new Xeons without the need to amend the whitelist:
Xeons with Performance Cores:
Sapphire Rapids (SPR, 2023)
Emerald Rapids (EMR, 2023)
Granite Rapids (GNR, 2024)
Diamond Rapids (DMR, 2026)
Xeons with Efficiency Cores:
Sierra Forest (SRF, 2024)
Clearwater Forest (CWF, 2026)
However these Xeons also expose accelerators as first device on a root bus
of its own:
QuickAssist Technology (QAT, crypto & compression accelerator)
Data Streaming Accelerator (DSA, dma engine)
In-Memory Analytics Accelerator (IAA, compression accelerator)
Whitelist them for P2PDMA as well. Move their Device ID macros from the
accelerator drivers to <linux/pci_ids.h> for reuse by P2PDMA code.
Unfortunately the Device IDs vary across Xeon generations as additional
features were added to the accelerators. This currently necessitates an
amendment for each new Xeon chip.
For future chips, this need shall be avoided by an ongoing effort to extend
ACPI HMAT with PCIe P2PDMA characteristics (latency, bandwidth, ordering
constraints). The PCI core will be able look up in this BIOS-provided ACPI
table whether P2PDMA is supported, instead of relying on a whitelist that
needs to be amended continuously.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> # QAT
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/6aac4922b5fe7070b11874427a9285e42ddd05a4.1780585518.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8165f7ff57d9667d2bb477ef6af83ede7fed4ad7 upstream.
A tunnel changelink() operates on at most two netns, dev_net(dev) and
the tunnel link netns t->net. They differ once the device is created in
or moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Add rtnl_dev_link_net_capable() next to rtnl_get_net_ns_capable() in
net/core/rtnetlink.c. It requires CAP_NET_ADMIN in the link netns and is
skipped when the link netns is dev_net(dev), where the rtnl path already
checked it. The other patches in this series use the same helper.
Gate ipgre_changelink() and erspan_changelink() with it, at the top of
the op before any attribute is parsed, because the parsers update live
tunnel fields first. ipgre_netlink_parms() sets t->collect_md before
ip_tunnel_changelink() runs.
Commit 8b484efd5cb4 ("ip6: vti: Use ip6_tnl.net in
vti6_siocdevprivate().") added the same check on the ioctl path. This
adds it on RTM_NEWLINK.
Reported-by: Xiao Liang <shaw.leon@gmail.com>
Closes: https://lore.kernel.org/netdev/CABAhCOSzP1vaThGV35_VnsRCb=87_CPjPVsTHbq905k8A+BuUg@mail.gmail.com/
Fixes: b57708add314 ("gre: add x-netns support")
Cc: stable@vger.kernel.org
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260612085941.3158249-2-maoyixie.tju@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 406e8a651a7b854c41fecd5117bb282b3a6c2c6b upstream.
The sk_msg sg.copy bitmap is part of the scatterlist entry ownership
state. A set bit tells sk_msg_compute_data_pointers() not to expose the
entry through writable BPF ctx->data. This protects entries backed by
pages that are not private to the sk_msg, such as splice-backed file
page-cache pages.
Several sk_msg transform paths move, copy, split, or compact
msg->sg.data[] entries without moving the matching sg.copy bit. This can
make an externally backed entry arrive at a new slot with a clear copy
bit. A later SK_MSG verdict can then expose sg_virt(sge) as writable
ctx->data and BPF stores can modify the original page cache.
Keep sg.copy synchronized with sg.data[] whenever entries are
transferred, shifted, split, or copied into a new sk_msg. Clear the bit
when an entry is replaced by a newly allocated private page or freed.
This covers the BPF pull/push/pop helpers, sk_msg_shift_left/right(),
sk_msg_xfer(), and tls_split_open_record(), including the partial tail
entry created during TLS open-record splitting.
Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling")
Cc: stable@vger.kernel.org
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Reported-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Yiming Qian <yimingqian591@gmail.com>
Link: https://patch.msgid.link/20260610062137.49075-1-yimingqian591@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull drm fixes from Dave Airlie:
"Looks like it's settled down a bit more thankfully. Small changes
across the board, amdgpu/xe leading with some colorop changes in the
core/amd. Otherwise some misc driver fixes.
colorop:
- make lut interpolation mutable
- track colorop updates correctly
amdgpu:
- UserQ fix
- Userptr fix
- MCCS freesync fix
- track colorop changes correctly
amdkfd:
- Fix an event information leak
- Events bounds check fix
- Trap cleanup fix
i915:
- Check supported link rates DPCD read
- Fix phys BO pread/pwrite with offset
xe:
- fix oops in suspend/shutdown without display
- RAS fixes
- Use HW_ERR prefix in log
- include all registered queues in TLB invalidation
- Fix refcount leak in xe_range_tree in error paths
- fix job timeout recovery for unstarted jobs and kernel queues
amdxdna:
- fix possible leak of mm_struct
ivpu:
- fix integer truncation
vc4:
- fix leak in krealloc() error handling
virtio:
- fix dma_fence ref-count leak"
* tag 'drm-fixes-2026-06-13' of https://gitlab.freedesktop.org/drm/kernel: (24 commits)
accel/amdxdna: Fix mm_struct reference leak in aie2_populate_range()
drm/xe: fix job timeout recovery for unstarted jobs and kernel queues
drm/xe: fix refcount leak in xe_range_fence_insert()
drm/xe: include all registered queues in TLB invalidation
drm/xe/hw_error: Use HW_ERR prefix in log
drm/xe/drm_ras: Add per node cleanup action
drm/xe/drm_ras: Make counter allocation drm managed
drm/xe/display: fix oops in suspend/shutdown without display
drm/amd/display: use plane color_mgmt_changed to track colorop changes
drm/atomic: track individual colorop updates
drm/colorop: make lut(1/3)d_interpolation props correctly behave as mutable
drm/colorop: Remove read-only comments from interpolation fields
drm/i915/gem: Fix phys BO pread/pwrite with offset
drm/vc4: fix krealloc() memory leak
drm/virtio: Fix driver removal with disabled KMS
drm/i915/edp: Check supported link rates DPCD read
accel/ivpu: Fix signed integer truncation in IPC receive
drm/virtio: fix dma_fence refcount leak on error in virtio_gpu_dma_fence_wait()
drm/amd/display: Consult MCCS FreeSync cap only if requested & supported
drm/amdkfd: Unwind debug trap enable on copy_to_user failure
...
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
amd:
- track colorop changes correctly
amdxdna:
- fix possible leak of mm_struct
colorop:
- make lut interpolation mutable
- track colorop updates correctly
ivpu:
- fix integer truncation
vc4:
- fix leak in krealloc() error handling
virtio:
- fix dma_fence ref-count leak
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260612081418.GA17001@2a02-2455-9062-2500-e496-5a17-62ba-545e.dyn6.pyur.net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from IPsec and netfilter.
This is relatively small, mostly because we are a bit behind our PW
queue. I'm not aware of any pending regression.
Current release - regressions:
- netfilter: nf_tables_offload: drop device refcount on error
Previous releases - regressions:
- core: add pskb_may_pull() to skb_gro_receive_list()
- xfrm: iptfs: preserve shared-frag marker in iptfs_consume_frags()
- ipv6: fix a potential NPD in cleanup_prefix_route()
- ipv4: fix use-after-free caused by the fqdir_pre_exit() flush
- eth:
- bnxt_en: fix NULL pointer dereference
- emac: fix use-after-free during device removal
- octeontx2-af: fix memory leak in rvu_setup_hw_resources()
- tun: zero the whole vnet header in tun_put_user()
- sit: reload inner IPv6 header after GSO offloads
Previous releases - always broken:
- core: fix double-free in netdev_nl_bind_rx_doit()
- netfilter: nf_log: validate MAC header was set before dumping it
- xfrm: iptfs: fix ABBA deadlock in iptfs_destroy_state()
- tcp: restrict SO_ATTACH_FILTER to priv users
- mctp: usb: fix race between urb completion and rx_retry
cancellation
- eth:
- mlx5: fix slab-out-of-bounds in mlx5_query_nic_vport_mac_list
- mvpp2: sync RX data at the hardware packet offset"
* tag 'net-7.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
octeontx2-af: fix IP fragment flag corruption on custom KPU profile load
ipv6: Fix a potential NPD in cleanup_prefix_route()
net: txgbe: initialize PHY interface to 0
net: txgbe: distinguish module types by checking identifier
net: txgbe: initialize module info buffer
net: mvpp2: build skb from XDP-adjusted data on XDP_PASS
net: mvpp2: refill RX buffers before XDP or skb use
net: mvpp2: limit XDP frame size to the RX buffer
net: mvpp2: sync RX data at the hardware packet offset
netfilter: nft_meta_bridge: fix stale stack leak via IIFHWADDR register
netfilter: nft_fib: fix stale stack leak via the OIFNAME register
netfilter: nft_exthdr: fix register tracking for F_PRESENT flag
netfilter: nf_log: validate MAC header was set before dumping it
netfilter: x_tables: avoid leaking percpu counter pointers
netfilter: nf_conntrack: destroy stale expectfn expectations on unregister
netfilter: nf_tables_offload: drop device refcount on error
netfilter: revalidate bridge ports
rds: mark snapshot pages dirty in rds_info_getsockopt()
ip6_vti: fix incorrect tunnel matching in vti6_tnl_lookup()
ptp: ocp: fix resource freeing order
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Revalidate bridge ports, add missing NULL checks to fetch the bridge
device by the port. From Florian Westphal.
2) Fix netdevice refcount leak in the error path of nft_fwd hardware
offload function, also from Florian.
3) Unregister helper expectfn callback on conntrack helper module
removal, otherwise dangling pointer remains in place,
from Weiming Shi.
4) Fix possible pointer infoleak in getsockopt() IPT_SO_GET_ENTRIES,
From Kyle Zeng.
5) Validate that device MAC header is present before nf_syslog
accesses it. From Xiang Mei.
6-8) Three patches to address a possible infoleak of stale stack
data in three nf_tables expressions, due to mismatch in the
_init() and _eval() function which is possible since 14fb07130c7d.
From Davide Ornaghi and Florian Westphal.
netfilter pull request 26-06-10
* tag 'nf-26-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_meta_bridge: fix stale stack leak via IIFHWADDR register
netfilter: nft_fib: fix stale stack leak via the OIFNAME register
netfilter: nft_exthdr: fix register tracking for F_PRESENT flag
netfilter: nf_log: validate MAC header was set before dumping it
netfilter: x_tables: avoid leaking percpu counter pointers
netfilter: nf_conntrack: destroy stale expectfn expectations on unregister
netfilter: nf_tables_offload: drop device refcount on error
netfilter: revalidate bridge ports
====================
Link: https://patch.msgid.link/20260610161629.214092-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
NAT helpers such as nf_nat_h323 store a raw pointer to module text in
exp->expectfn (e.g. ip_nat_q931_expect). nf_ct_helper_expectfn_unregister()
only unlinks the callback descriptor and never walks the expectation table,
so an expectation pending at module removal survives with a dangling
exp->expectfn into freed module text.
When the expected connection arrives, init_conntrack() invokes
exp->expectfn(), now a stale pointer into the unloaded module. Reproduced
on a KASAN build by loading the H.323 helpers, creating a Q.931
expectation, unloading nf_nat_h323, then connecting to the expected port:
Oops: int3: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:0xffffffffa06102d1
init_conntrack.isra.0 (net/netfilter/nf_conntrack_core.c:1862)
nf_conntrack_in (net/netfilter/nf_conntrack_core.c:2049)
ipv4_conntrack_local (net/netfilter/nf_conntrack_proto.c:223)
nf_hook_slow (net/netfilter/core.c:619)
__ip_local_out (net/ipv4/ip_output.c:120)
__tcp_transmit_skb (net/ipv4/tcp_output.c:1715)
tcp_connect (net/ipv4/tcp_output.c:4374)
tcp_v4_connect (net/ipv4/tcp_ipv4.c:345)
__sys_connect (net/socket.c:2167)
Modules linked in: nf_conntrack_h323 [last unloaded: nf_nat_h323]
Reaching the dangling state requires CAP_SYS_MODULE in the initial user
namespace to remove a NAT helper that still has live expectations, so this
is a robustness fix; leaving an expectation pointing at freed text is wrong
regardless.
Add nf_ct_helper_expectfn_destroy(), which walks the expectation table and
drops every expectation whose ->expectfn matches the descriptor being torn
down. Call it from each NAT helper's exit path after the existing RCU grace
period, so no expectation outlives the code it points at and no extra
synchronize_rcu() is introduced. With the fix, the same reproducer runs to
completion without the Oops.
Fixes: f587de0e2feb ("[NETFILTER]: nf_conntrack/nf_nat: add H.323 helper port")
Reported-by: Xiang Mei <xmei5@asu.edu>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
As we do for CRTC color mgmt properties, use color_mgmt_changed flag to
track any value changes in the color pipeline of a given plane, so that
drivers can update color blocks as soon as plane color pipeline or
individual colorop values change. Since we're here, only announce and
track changes to plane COLOR_PIPELINE prop if its value is actually
changing.
Fixes: 8c5ea1745f4c ("drm/colorop: Add BYPASS property")
Fixes: 7fa3ee8c0a79 ("drm/colorop: Define LUT_1D interpolation")
Fixes: 41651f9d42eb ("drm/colorop: Add 1D Curve subtype")
Fixes: 3410108037d5 ("drm/colorop: Add multiplier type")
Fixes: db971856bbe0 ("drm/colorop: Add 3D LUT support to color pipeline")
Fixes: e5719e7f1900 ("drm/colorop: Add 3x4 CTM type")
Fixes: 99a4e4f08abe ("drm/colorop: Add 1D Curve Custom LUT type")
Fixes: 2afc3184f3b3 ("drm/plane: Add COLOR PIPELINE property")
Reviewed-by: Harry Wentland <harry.wentland@amd.com> #v1
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Fixes: 9ba25915efba ("drm/amd/display: Add support for sRGB EOTF in DEGAM block")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patch.msgid.link/20260609110420.1298352-4-mwen@igalia.com
|
|
As interpolation props are actually mutable props, any changes should be
handled by drm_colorop_state. Move their enum and make it correctly
behaves as mutable.
Fixes: 7fa3ee8c0a79 ("drm/colorop: Define LUT_1D interpolation")
Fixes: db971856bbe0 ("drm/colorop: Add 3D LUT support to color pipeline")
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Fixes: 9ba25915efba ("drm/amd/display: Add support for sRGB EOTF in DEGAM block")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patch.msgid.link/20260609110420.1298352-3-mwen@igalia.com
|
|
The lut1d_interpolation and lut3d_interpolation fields and their
associated properties were marked as read-only, but userspace
can set them via drm_atomic_colorop_set_property().
Fixes: 7fa3ee8c0a79 ("drm/colorop: Define LUT_1D interpolation")
Fixes: db971856bbe0 ("drm/colorop: Add 3D LUT support to color pipeline")
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Fixes: 9ba25915efba ("drm/amd/display: Add support for sRGB EOTF in DEGAM block")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patch.msgid.link/20260609110420.1298352-2-mwen@igalia.com
|
|
skb_is_err_queue() treats PACKET_OUTGOING as the sole marker for an skb
from sk_error_queue. That assumption is not true for AF_PACKET sockets:
outgoing packet taps are also delivered to packet sockets with
skb->pkt_type == PACKET_OUTGOING, but their skb->cb is owned by AF_PACKET
instead of struct sock_exterr_skb.
If such an skb is received with timestamping enabled, the generic
timestamp cmsg path can read AF_PACKET control-buffer state as
sock_exterr_skb::opt_stats. With SO_RXQ_OVFL enabled, the packet drop
counter overlaps opt_stats. An odd drop count makes the path emit
SCM_TIMESTAMPING_OPT_STATS with skb->len and skb->data. For non-linear
skbs this copies past the linear head and can trigger hardened usercopy or
disclose adjacent heap contents.
Keep skb_is_err_queue() local to net/socket.c, but make it verify that
the PACKET_OUTGOING marker is paired with the sock_rmem_free destructor
installed by sock_queue_err_skb(). AF_PACKET receive skbs use normal
receive ownership and no longer pass as error-queue skbs, while legitimate
sk_error_queue entries keep the PACKET_OUTGOING marker and sock_rmem_free
ownership.
Fixes: 8605330aac5a ("tcp: fix SCM_TIMESTAMPING_OPT_STATS for normal skbs")
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260607021819.49698-1-kylebot@openai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull runtime verifier fixes from Steven Rostedt:
- Fix reset ordering on per-task destruction
Reset the task before dropping the slot instead of after, which was
causing out-of-bound memory accesses.
- Fix HA monitor synchronization and cleanup
Ensure synchronous cleanup for HA monitors by running timer callbacks
in RCU read-side critical sections and using synchronize_rcu() during
destruction.
- Avoid armed timers after tasks exit
Add automatic cleanup for per-task HA monitors to prevent timers from
firing after task exit.
- Fix memory ordering for DA/HA monitors
Fix race conditions during monitor start by using release-acquire
semantics for the monitoring flag.
- Fix initialization for DA/HA monitors
Ensure monitors are not initialized relying on potentially corrupted
state like the monitoring flag, that is not reset by all monitors
type and may have an unknown state in monitors reusing the storage
(per-task).
- Fix memory safety in per-task and per-object monitors
Prevent use-after-free and out-of-bounds access by synchronizing with
in-flight tracepoint probes using tracepoint_synchronize_unregister()
before freeing monitor storage or releasing task slots.
- Adjust monitors for preemptible tracepoints
Fix monitors that relied on tracepoints disabling preemption.
Explicitly disable task migration when per-CPU monitors handle events
to avoid accessing the wrong state and update the opid monitor logic.
- Fix incorrect __user specifier usage
Remove __user from a non-pointer variable in the extract_params()
helper.
- Fix bugs in the rv tool
Ensure strings are NUL-terminated, fix substring matching in monitor
searches, and improve cleanup and exit status handling.
- Fix several bugs in rvgen
Fix LTL literal stringification, subparsers' options handling, and
suffix stripping in dot2k.
* tag 'trace-rv-v7.1-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
verification/rvgen: Fix ltl2k writing True as a literal
verification/rvgen: Fix options shared among commands
verification/rvgen: Fix suffix strip in dot2k
tools/rv: Fix cleanup after failed trace setup
tools/rv: Fix substring match when listing container monitors
tools/rv: Fix substring match bug in monitor name search
tools/rv: Ensure monitor name and desc are NUL-terminated
rv: Use 0 to check preemption enabled in opid
rv: Prevent task migration while handling per-CPU events
rv: Ensure synchronous cleanup for HA monitors
rv: Add automatic cleanup handlers for per-task HA monitors
rv: Do not rely on clean monitor when initialising HA
rv: Fix monitor start ordering and memory ordering for monitoring flag
rv: Ensure all pending probes terminate on per-obj monitor destroy
rv: Prevent in-flight per-task handlers from using invalid slots
rv: Reset per-task DA monitors before releasing the slot
rv: Fix __user specifier usage in extract_params()
|
|
Pull rdma fixes from Jason Gunthorpe:
"Several significant bug fixes of pre-existing issues:
- Missing validation on ucap fd types passed from userspace
- Missing validation of HW DMA space vs userpace expected sizes in
EFA queue setup
- DMA corruption when using DMA block sizes >= 4G when setting up MRs
in all drivers
- Missing validation of CPU IDs when setting up dma handles
- Missing validation of IB_MR_REREG_ACCESS when changing writability
of a MR
- Missing validation of received message/packet size in ISER and SRP"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/srp: bound SRP_RSP sense copy by the received length
IB/isert: Reject login PDUs shorter than ISER_HEADERS_LEN
RDMA: During rereg_mr ensure that REREG_ACCESS is compatible
RDMA/core: Validate cpu_id against nr_cpu_ids in DMAH alloc
RDMA/umem: Fix truncation for block sizes >= 4G
RDMA/efa: Validate SQ ring size against max LLQ size
RDMA/core: Validate the passed in fops for ib_get_ucaps()
|
|
mlx5_query_nic_vport_mac_list() sizes its firmware command buffer using
the PF's log_max_current_uc/mc_list capabilities. When querying a VF
vport with a larger configured max (via devlink), the firmware response
can overflow this buffer:
BUG: KASAN: slab-out-of-bounds in mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core]
Read of size 4 at addr ff1100013ffc8a12 by task kworker/u96:2/385
CPU: 12 UID: 0 PID: 385 Comm: kworker/u96:2 Not tainted 7.0.0-rc6+ #1 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009)
Workqueue: mlx5_esw_wq esw_vport_change_handler [mlx5_core]
Call Trace:
<TASK>
dump_stack_lvl+0x69/0xa0
print_report+0x176/0x4e4
kasan_report+0xc8/0x100
mlx5_query_nic_vport_mac_list+0x453/0x4c0 [mlx5_core]
esw_update_vport_addr_list+0x2e3/0xda0 [mlx5_core]
esw_vport_change_handle_locked+0xa1f/0x1060 [mlx5_core]
esw_vport_change_handler+0x6a/0x90 [mlx5_core]
process_one_work+0x87f/0x15e0
worker_thread+0x62b/0x1020
kthread+0x375/0x490
ret_from_fork+0x4dc/0x810
ret_from_fork_asm+0x11/0x20
</TASK>
Fix by querying the vport's own HCA caps to size the buffer correctly.
Refactor the function to allocate and return the MAC list internally,
removing the caller's dependency on knowing the correct max.
Fixes: e16aea2744ab ("net/mlx5: Introduce access functions to modify/query vport mac lists")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260604135849.458060-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If IB_MR_REREG_ACCESS changes from RO to RW then the umem has to be
re-evaluated to ensure it is properly pinned as RW. Since the umem is
hidden inside each driver's mr struct add a ib_umem_check_rereg() function
that each driver has to call before processing IB_MR_REREG_ACCESS.
mlx4 has to retain its duplicate ib_access_writable check because it
implements IB_MR_REREG_ACCESS | IB_MR_REREG_TRANS by changing both items
in place sequentially while the MR is live, so it will continue to not
support this combination.
Cc: stable@vger.kernel.org
Fixes: b40656aa7d55 ("RDMA/umem: remove FOLL_FORCE usage")
Link: https://patch.msgid.link/r/0-v1-06fb1a2d6cf5+107-rereg_access_jgg@nvidia.com
Reported-by: Philip Tsukerman <philiptsukerman@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- MSHV driver fixes from various people (Anirudh Rayabharam, Can Peng,
Dexuan Cui, Michael Kelley, Jork Loeser, Wei Liu)
- Hyper-V user space tools fixes (Thorsten Blum)
- Allow VMBus to be unloaded after frame buffer is flushed (Michael
Kelley)
* tag 'hyperv-fixes-signed-20260607' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
mshv: support 1G hugepages by passing them as 2M-aligned chunks
Drivers: hv: vmbus: Improve the logic of reserving fb_mmio on Gen2 VMs
mshv: use kmalloc_array in mshv_root_scheduler_init
mshv: Add conditional VMBus dependency
hyperv: Clean up and fix the guest ID comment in hvgdk.h
drm/hyperv: During panic do VMBus unload after frame buffer is flushed
Drivers: hv: vmbus: Provide option to skip VMBus unload on panic
mshv: unmap debugfs stats pages on kexec
mshv: clean up SynIC state on kexec for L1VH
mshv: limit SynIC management to MSHV-owned resources
hv: utils: replace deprecated strcpy with strscpy in kvp_register
hv: utils: handle and propagate errors in kvp_register
mshv: add a missing padding field
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull rseq fix from Ingo Molnar:
- Fix uninitialized stack variable in rseq_exit_user_update() (Qing
Wang)
* tag 'sched-urgent-2026-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq: Fix using an uninitialized stack variable in rseq_exit_user_update()
|
|
After commit 0652a3daa787 ("tracing: Fix CFI violation in probestub
being called by tprobes"), there are many build errors when building
ARCH=arm multi_v7_defconfig + CONFIG_CFI=y like:
In file included from drivers/base/devres.c:17:
In file included from drivers/base/trace.h:16:
In file included from include/linux/tracepoint.h:23:
include/linux/cfi.h:44:6: error: call to undeclared function 'get_kernel_nofault'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
44 | if (get_kernel_nofault(hash, func - cfi_get_offset()))
| ^
1 error generated.
get_kernel_nofault() is called in the generic version of
cfi_get_func_hash() but nothing ensures uaccess.h is always included for
a proper expansion and prototype. Include uaccess.h in cfi.h to clear
up the errors.
Cc: stable@vger.kernel.org
Fixes: 0652a3daa787 ("tracing: Fix CFI violation in probestub being called by tprobes")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter, wireless and Bluetooth.
Current release - fix to a fix:
- Bluetooth: MGMT: fix backward compatibility with bluetoothd
which adds stray bytes to MGMT_OP_ADD_EXT_ADV_DATA
Previous releases - regressions:
- af_unix: fix inq_len update inaccuracy on partial read
- eth: fec: fix pinctrl default state restore order on resume
- wifi: iwlwifi:
- mvm: don't support the reset handshake for old firmwares
- pcie: simplify the resume flow if fast resume is not used,
work around NIC access failures
Previous releases - always broken:
- Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
- sctp: fix a couple of bugs in COOKIE_ECHO processing
- sched: fix pedit partial COW leading to page cache corruption
- wifi: nl80211: reject oversized EMA RNR lists
- netfilter:
- conntrack_irc: fix possible out-of-bounds read
- bridge: make ebt_snat ARP rewrite writable
- appletalk: zero-initialize aarp_entry to prevent heap info leak
- ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options
- mptcp: fix number of bugs reported by AI scans and discovered
during NVMe over MPTCP testing"
* tag 'net-7.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
Reapply "bnxt_en: bring back rtnl_lock() in the bnxt_open() path"
udp: clear skb->dev before running a sockmap verdict
sctp: purge outqueue on stale COOKIE-ECHO handling
bonding: annotate data-races arcound churn variables
net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr
rtase: Avoid sleeping in get_stats64()
ieee802154: 6lowpan: only accept IPv6 packets in lowpan_xmit()
ipv6: mcast: Fix use-after-free when processing MLD queries
selftests: net: add vxlan vnifilter notification test
vxlan: vnifilter: fix spurious notification on VNI update
vxlan: vnifilter: send notification on VNI add
rtase: Reset TX subqueue when clearing TX ring
octeontx2-af: npc: Fix CPT channel mask in npc_install_flow
dt-bindings: ethernet: eswin: fix hsp-sp-csr backward compatibility
sctp: validate cached peer INIT chunk length in COOKIE_ECHO processing
net/sched: fix pedit partial COW leading to page cache corruption
vsock/vmci: fix sk_ack_backlog leak on failed handshake
net: bonding: fix NULL pointer dereference in bond_do_ioctl()
geneve: fix length used in GRO hint UDP checksum adjustment
net: ethernet: mtk_eth_soc: Fix use-after-free in metadata dst teardown
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fix from Steven Rostedt:
- Fix CFI violation in probestub function
The probestub is a function to allow tprobes to hook to a tracepoint
to gain access to its parameters.
The function itself is only referenced by the tracepoint structure
which lives in the __tracepoint section. objtool explicitly ignores
that section and when processing functions in the kernel, if it
detects one that has no references it will seal it to have its ENDBR
stripped on boot up.
This means the probstub function will have its ENDBR stripped and if
a tprobe is attached to it with IBT enabled, it will go *boom*.
* tag 'trace-v7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix CFI violation in probestub being called by tprobes
|
|
tcf_pedit_act() computes the COW range for skb_ensure_writable()
once before the key loop using tcfp_off_max_hint, but the hint does
not account for the runtime header offset added by typed keys. This
can leave part of the write region un-COW'd.
Fix by moving skb_ensure_writable() inside the per-key loop where
the actual write offset is known, and add overflow checking on the
offset arithmetic. For negative offsets (e.g. Ethernet header edits
at ingress), use skb_cow() to COW the headroom instead. Guard
offset_valid() against INT_MIN, where negation is undefined.
Fixes: 8b796475fd78 ("net/sched: act_pedit: really ensure the skb is writable")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Reported-by: Keenan Dong <keenanat2000@gmail.com>
Reported-by: Han Guidong <2045gemini@gmail.com>
Reported-by: Zhang Cen <rollkingzzc@gmail.com>
Reviewed-by: Han Guidong <2045gemini@gmail.com>
Tested-by: Han Guidong <2045gemini@gmail.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Tested-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Rajat Gupta <rajat.gupta@oss.qualcomm.com>
Link: https://patch.msgid.link/20260531123221.48732-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
