| Age | Commit message (Collapse) | Author |
|---|
|
commit f88a31308db6a856229150039b0f56d59696ed31 upstream.
Eliminate all kernel-doc warnings in seqlock.h:
- correct the macro to have "()" immediately following the macro name
- don't include the macro parameters in the short description (first line)
- make the parameter names in the comments match the actual macro
parameter names.
- use "::" for the Example
WARNING: include/linux/seqlock.h:1341 This comment starts with '/**', but isn't a kernel-doc comment.
* scoped_seqlock_read (lock, ss_state) - execute the read side critical
Documentation/locking/seqlock:242: include/linux/seqlock.h:1351: WARNING:
Definition list ends without a blank line; unexpected unindent. [docutils]
Warning: include/linux/seqlock.h:1357 function parameter '_seqlock' not described in 'scoped_seqlock_read'
Warning: include/linux/seqlock.h:1357 function parameter '_target' not described in 'scoped_seqlock_read'
Fixes: cc39f3872c08 ("seqlock: Introduce scoped_seqlock_read()")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260123183749.3997533-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a6f0643e4f63cfaa0d5d4a69de4f132eac4b8fe4 ]
When CONFIG_BPF_LSM=y is set, BPF inode storage maps
(BPF_MAP_TYPE_INODE_STORAGE) are compiled into the kernel. However,
if the BPF LSM is not explicitly enabled at boot time (e.g. omitted
from the "lsm=" boot parameter), lsm_prepare() is never executed for
the BPF LSM.
Consequently, the BPF inode security blob offset
(bpf_lsm_blob_sizes.lbs_inode) is never initialized and remains at
its default compiled size of 8 bytes instead of being updated to a
valid offset past the reserved struct rcu_head (typically 16 bytes
or more).
When a privileged user creates and updates a BPF_MAP_TYPE_INODE_STORAGE
map, bpf_inode() evaluates inode->i_security + 8. This erroneously
aliases the struct rcu_head.func callback pointer at the beginning
of the inode->i_security blob. During subsequent map element cleanup
or inode destruction, writing NULL to owner_storage clears the queued
RCU callback pointer. When rcu_do_batch() later executes the queued
callback, it attempts an instruction fetch at address 0x0, triggering
an immediate kernel panic.
Fix this by introducing a global bpf_lsm_initialized boolean flag
marked with __ro_after_init. Set this flag to true inside bpf_lsm_init()
when the LSM framework successfully registers the BPF LSM. Gate map
allocation in inode_storage_map_alloc() on this flag, returning
-EOPNOTSUPP if the BPF LSM is in turn uninitialized.
This fail-fast approach prevents userspace from allocating inode
storage maps when the supporting BPF LSM infrastructure is absent,
avoiding zombie map states.
Fixes: 8ea636848aca ("bpf: Implement bpf_local_storage for inodes")
Reported-by: oxsignal <awo@kakao.com>
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/bpf/20260628201103.3624525-1-mattbobrowski@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4051a9115ad24bb9a691774730ca9c1dd56de665 ]
simple_recursive_removal(), but instead of victim dentry it takes
parent + name.
Used to be open-coded in fs/fuse/control.c, but there's no need to expose
the guts of that thing there and there are other potential users, so
let's lift it into libfs...
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Stable-dep-of: 3137b243c939 ("usb: gadget: f_fs: initialize reset_work at allocation time")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 48a97ffc6c826640907d13b199e29008f4fe2c15 ]
We have many places which open-code what's now is bpf_rcu_lock_held()
macro, so replace all those places with a clean and short macro invocation.
For that, move bpf_rcu_lock_held() macro into include/linux/bpf.h.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20251014201403.4104511-1-andrii@kernel.org
Stable-dep-of: 2f884d371faf ("bpf: Allow LPM map access from sleepable BPF programs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cc39f3872c0865bef992b713338df369554fa9e0 ]
The read_seqbegin/need_seqretry/done_seqretry API is cumbersome and
error prone. With the new helper the "typical" code like
int seq, nextseq;
unsigned long flags;
nextseq = 0;
do {
seq = nextseq;
flags = read_seqbegin_or_lock_irqsave(&seqlock, &seq);
// read-side critical section
nextseq = 1;
} while (need_seqretry(&seqlock, seq));
done_seqretry_irqrestore(&seqlock, seq, flags);
can be rewritten as
scoped_seqlock_read (&seqlock, ss_lock_irqsave) {
// read-side critical section
}
Original idea by Oleg Nesterov; with contributions from Linus.
Originally-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Stable-dep-of: 6650527444da ("proc: protect ptrace_may_access() with exec_update_lock (part 1)")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6fef032af0092ed5ccb767239a9ac1bc38c08a40 ]
l2cap_sock_new_connection_cb() returned l2cap_pi(sk)->chan after
release_sock(parent). Once the parent lock is dropped the newly
enqueued child socket sk is reachable via the accept queue, so another
task can accept and free it before the callback dereferences sk,
resulting in a use-after-free.
Rework the ->new_connection() op so the core, rather than the callback,
owns the child channel's lifetime. The op now receives a pre-allocated
new_chan and returns an errno instead of allocating and returning a
channel. l2cap_new_connection() allocates the child channel and links
it into the conn list via __l2cap_chan_add() before invoking the
callback, so the conn-list reference keeps the channel alive once
release_sock(parent) exposes the socket to other tasks.
Channel configuration that was duplicated in l2cap_sock_init() and the
various new_connection callbacks is consolidated into
l2cap_chan_set_defaults(), which now inherits from the parent channel
when one is supplied.
Fixes: 8ffb929098a5 ("Bluetooth: Remove parent socket usage from l2cap_core.c")
Cc: stable@kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Siwei Zhang <oss@fourdim.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 337b1b566db087347194e4543ddfdfa5645275cc ]
BAR resize operation is implemented in the pci_resize_resource() and
pbus_reassign_bridge_resources() functions. pci_resize_resource() can be
called either from __resource_resize_store() from sysfs or directly by the
driver for the Endpoint Device.
The pci_resize_resource() requires that caller has released the device
resources that share the bridge window with the BAR to be resized as
otherwise the bridge window is pinned in place and cannot be changed.
pbus_reassign_bridge_resources() rolls back resources if the resize
operation fails, but rollback is performed only for the bridge windows.
Because releasing the device resources are done by the caller of the BAR
resize interface, these functions performing the BAR resize do not have
access to the device resources as they were before the resize.
pbus_reassign_bridge_resources() could try __pci_bridge_assign_resources()
after rolling back the bridge windows as they were, however, it will not
guarantee the resource are assigned due to differences in how FW and the
kernel assign the resources (alignment of the start address and tail).
To perform rollback robustly, the BAR resize interface has to be altered to
also release the device resources that share the bridge window with the BAR
to be resized.
Also, remove restoring from the entries failed list as saved list should
now contain both the bridge windows and device resources so the extra
restore is duplicated work.
Some drivers (currently only amdgpu) want to prevent releasing some
resources. Add exclude_bars param to pci_resize_resource() and make amdgpu
pass its register BAR (BAR 2 or 5), which should never be released during
resize operation. Normally 64-bit prefetchable resources do not share a
bridge window with the 32-bit only register BAR, but there are various
fallbacks in the resource assignment logic which may make the resources
share the bridge window in rare cases.
This change (together with the driver side changes) is to counter the
resource releases that had to be done to prevent resource tree corruption
in the ("PCI: Release assigned resource before restoring them") change. As
such, it likely restores functionality in cases where device resources were
released to avoid resource tree conflicts which appeared to be "working"
when such conflicts were not correctly detected by the kernel.
Reported-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://lore.kernel.org/linux-pci/f9a8c975-f5d3-4dd2-988e-4371a1433a60@hogyros.de/
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Link: https://lore.kernel.org/linux-pci/874irqop6b.fsf@draig.linaro.org/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash amdgpu BAR selection from
https: //lore.kernel.org/r/20251114103053.13778-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113162628.5946-7-ilpo.jarvinen@linux.intel.com
Stable-dep-of: ee7471fe968d ("PCI: Skip Resizable BAR restore on read error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b9bdd68b8b979c7e9de58b2e7d21e1d7d932c755 ]
request_firmware_nowait() keeps the callback module pinned and holds
a device reference until the firmware work completes.
Callers still have no way to cancel or synchronize the queued callback
before tearing down their driver-private state.
Track scheduled async firmware work in an internal list and add
request_firmware_nowait_cancel(). The helper cancels work matching the
device, callback context and callback function. It cancels work that has
not started yet and waits for an already-running callback to return. If
the request has already completed, it is a no-op.
Keep the existing request_firmware_nowait() lifetime model manual. A
devres-managed variant can be layered on top separately if needed.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260505-alsa-hda-tas2781-fw-callback-teardown-v4-1-e7c4bf930dc8@gmail.com
Stable-dep-of: 5367e2ad14f0 ("ALSA: hda/tas2781: Cancel async firmware request at unbind")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ca70ce555a1eb8edf5fb1d5575f1fe19c9ae17f4 ]
Introduce devm_acpi_install_notify_handler() for installing an ACPI
notify handler managed by devres that will be removed automatically on
driver detach.
It installs the notify handler on the device object in the ACPI
namespace that corresponds to the owner device's ACPI companion, if
present (an error is returned if the owner device doesn't have an ACPI
companion).
Currently, there is no way to manually remove the notify handler
installed by it because none of its users brought on subsequently
will need to do that.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[ rjw: Kerneldoc comment refinement ]
Link: https://patch.msgid.link/2268031.irdbgypaU6@rafael.j.wysocki
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 18a00ed0e718 ("ACPI: NFIT: core: Fix possible deadlock and missing notifications")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 293baeae9b2434a3e432629d7720b5603db2d77e upstream.
ieee80211_mle_common_size() uses the first common-info octet as the
common information length for all known MLE types. However,
ieee80211_mle_size_ok() only validates that octet for Basic, Probe
Request, and TDLS MLEs.
Reconfiguration MLEs also skipped the length octet when calculating the
minimum common size, and Priority Access MLEs skipped validation of the
advertised common information length.
Account for the Reconfiguration common-info length octet and validate
the advertised common information length for all known MLE types. Keep
unknown-type handling unchanged.
Fixes: 0f48b8b88aa9 ("wifi: ieee80211: add definitions for multi-link element")
Cc: stable@vger.kernel.org
Signed-off-by: Zhao Li <enderaoelyther@gmail.com>
Link: https://patch.msgid.link/20260611173506.36838-2-enderaoelyther@gmail.com
[remove now misleading comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c9c9b37f8c5505224e8d206184df3bb668ee00cf upstream.
The br_netfilter fake rtable is embedded in struct net_bridge and is
attached to bridged packets with skb_dst_set_noref(). If such a packet is
queued to NFQUEUE, __nf_queue() upgrades that fake dst with
skb_dst_force().
At that point the queued skb can hold a real dst reference after bridge
teardown has started. The problem is not that every bridged packet needs
its own dst reference. The problem is that NFQUEUE can keep the bridge
private fake dst alive after unregister begins.
Fix this by keeping the bridge fake dst model unchanged and pinning the
bridge master device only while the packet sits in NFQUEUE. Record the
bridge device in nf_queue_entry when the queued skb carries a bridge fake
dst, take a device reference for the queue lifetime, and drop it when the
queue entry is freed.
Also make sure queued entries are reaped when that bridge device goes
down, and drop the redundant nf_bridge_info_exists() test from the fake
dst detection.
This keeps netdev_priv(br->dev) alive until verdict completion, so the
embedded fake rtable and its metrics backing storage cannot be freed out
from under dst_release(). It also avoids the constant refcount bump and
avoids using ipv4-specific dst helpers for IPv6 bridge traffic.
Fixes: 34666d467cbf ("netfilter: bridge: move br_netfilter out of the core")
Cc: stable@kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Haoze Xie <royenheart@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 46bc86c833956219bbfd246c1ffd832a479c5199 ]
The TLS connect path has a use-after-free: nothing pins the
upper rpc_clnt across the delayed connect_worker. xs_connect()
stores task->tk_client in sock_xprt::clnt as a raw pointer
and queues the worker; for TLS-secured transports that worker
is xs_tcp_tls_setup_socket(), which reads several fields out
of the saved pointer (cl_timeout, cl_program, cl_prog,
cl_vers, cl_cred, cl_stats) to construct the args for the
inner handshake rpc_clnt.
The xprt does not reference the rpc_clnt; the rpc_clnt
references the xprt. xs_destroy() does cancel the
connect_worker, but it runs only when the xprt's refcount
drops to zero, which cannot happen until the rpc_clnt
releases its cl_xprt reference in rpc_free_client_work().
When a TLS handshake fails fatally (for example, an mTLS
mount whose client cert does not match the server), the
connecting task is woken with -EACCES and exits, the mount
caller invokes rpc_shutdown_client(), and the upper rpc_clnt
is freed before the queued connect_worker fires.
xs_tcp_tls_setup_socket() then dereferences the freed clnt,
producing the refcount_t underflow Michael Nemanov reported.
Take a reference on the upper rpc_clnt in xs_connect() for
TLS transports via a new rpc_hold_client() helper, and drop
it in the connect_worker's exit path with rpc_release_client().
The xprt_lock_connect() / xprt_unlock_connect() pairing
already serialises xs_connect() with xs_tcp_tls_setup_socket(),
so the take and release are balanced one-for-one.
The non-TLS connect worker (xs_tcp_setup_socket) never reads
sock_xprt::clnt, so leave that path alone and avoid the
clnt-holds-xprt-holds-clnt cycle that would otherwise prevent
xprt destruction.
Reported-by: Michael Nemanov <michael.nemanov@vastdata.com>
Closes: https://lore.kernel.org/linux-nfs/40e3d522-dfcf-4fc1-9c55-b5e81f1536d5@vastdata.com/
Fixes: 75eb6af7acdf ("SUNRPC: Add a TCP-with-TLS RPC transport class")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Michael Nemanov <michael.nemanov@vastdata.com>
Reviewed-by: Michael Nemanov <michael.nemanov@vastdata.com>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bae7ce7bafb59e42dc0e0e2999fdd9d1cffe3866 ]
IPVS callers already parse the packet into struct ip_vs_iphdr before
updating connection state. For IPv6 this records the real
transport-header offset after extension headers in iph.len.
Pass this parsed transport offset through ip_vs_set_state() and the
protocol state_transition() callback so protocol handlers can use the
same packet context as scheduling and NAT handling. This patch only
changes the common callback plumbing and adapts the protocol callback
signatures; TCP and SCTP start using the value in follow-up patches.
Signed-off-by: Yizhou Zhao <zhaoyz24@mails.tsinghua.edu.cn>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Stable-dep-of: 2500fa3958b1 ("ipvs: use parsed transport offset in TCP state lookup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9b26518b6896a16b809b1e42986f4ebac7bccc1e ]
A race condition exists between device teardown and incoming MLD query
processing, leading to a Use-After-Free in the MLD delayed work.
During device destruction, the primary reference to inet6_dev is dropped,
which can drop its refcount to 0. The actual freeing of inet6_dev memory
is deferred via RCU.
Concurrently, the packet receive path runs under RCU read lock and obtains
the inet6_dev pointer. Because the memory is RCU-protected, CPU-0 can
safely dereference inet6_dev even if its refcount has hit 0.
However, if CPU-0 calls igmp6_event_query() and schedules delayed work, it
attempts to acquire a reference using in6_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the inet6_dev memory is still scheduled to be freed after the RCU
grace period, the device is freed while the work is still scheduled.
When the work runs, it accesses the freed memory, causing a kernel panic.
Fix this by using refcount_inc_not_zero() (via a new helper
in6_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not schedule the work.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260705181756.963063-3-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7b19c0f81ed1fdaec6bc522569be367199a9edf3 ]
A race condition exists between device teardown (inetdev_destroy) and
incoming IGMP query processing (igmp_rcv), leading to a Use-After-Free
in the IGMP timer callback.
During device destruction, inetdev_destroy() drops the primary reference
to in_device, which can drop its refcount to 0. The actual freeing of
in_device memory is deferred via RCU (using call_rcu()).
Concurrently, igmp_rcv() runs under RCU read lock and obtains the
in_device pointer. Because the memory is RCU-protected, CPU-0 can safely
dereference in_device even if its refcount has hit 0.
However, if CPU-0 calls igmp_gq_start_timer() and re-arms the timer, it
attempts to acquire a reference using in_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the in_device memory is still scheduled to be freed after the RCU
grace period (as the free callback does not check the refcount again),
the device is freed while the timer is still armed. When the timer
expires, it accesses the freed memory, causing a kernel panic.
Fix this by using refcount_inc_not_zero() (via a new helper
in_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not arm the timer.
A similar issue in IPv6 MLD is fixed in a subsequent patch.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Zero Day Initiative <zdi-disclosures@trendmicro.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260705181756.963063-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fd076d8deeab6f9f18ef13400f89e1f550df665b ]
slen contains ISO_SDU_Length (12 bits), RFU (2 bits),
Packet_Status_Flags (2 bits).
Exclude the RFU bits from hci_iso_data_len. Also add masks to the pack
macro.
Fixes: 4de0fc599eb9 ("Bluetooth: Add definitions for CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8b519cbcabe836a441369fbec1a8a6518a709251 ]
There is a TOCTOU race condition in flower lockless approach between sizing
a flow_rule buffer and filling it.
zdi-disclosures@trendmicro.com reports:
The cls_flower classifier operates with TCF_PROTO_OPS_DOIT_UNLOCKED
(fl_change runs without RTNL), while RTM_NEWACTION holds RTNL, so the
independent locking domains make the race reachable in practice. KASAN
confirms:
BUG: KASAN: slab-out-of-bounds in tcf_pedit_offload_act_setup+0x81b/0x930
Write of size 4 at addr ffff888001f27520 by task poc-toctou/312
The buggy address is located 0 bytes to the right of
allocated 288-byte region [ffff888001f27400, ffff888001f27520)
(cache kmalloc-512)
Note: The result is a heap OOB write attacker-controlled content into the
adjacent slab object (requires CAP_NET_ADMIN).
The fix introduces reading tcfp_nkeys under act->tcfa_lock in all places
using a new tcf_pedit_nkeys_locked() which replaces the old tcf_pedit_nkeys().
Additionally we close the remaining TOCTOU window between the sizing read and
the fill reads by more careful accounting.
Rather than silently truncating the key count, which leads to incorrect
action semantics offloaded to hardware and secondary OOB writes if
the remaining capacity is zero or consumed by prior actions, we enforce
remaining capacity checks and return -ENOSPC if the required space exceeds
the remaining capacity.
Fixes: 71d0ed7079df ("net/act_pedit: Support using offset relative to the conventional network headers")
Reported-by: zdi-disclosures@trendmicro.com
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260701161912.125355-1-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d335dcc6f521571d57117b8deeebc940836e5450 ]
GUE private flags can indicate that remote checksum offload metadata is
present. The private flags field itself is accounted for by
guehdr_flags_len(), but guehdr_priv_flags_len() currently returns 0 even
when GUE_PFLAG_REMCSUM is set.
This lets a packet with only the private flags field pass
validate_gue_flags(), after which gue_remcsum() and gue_gro_remcsum()
read the missing REMCSUM start/offset fields from the following bytes.
Account for GUE_PLEN_REMCSUM when GUE_PFLAG_REMCSUM is present so that
malformed packets are rejected during option validation.
Fixes: c1aa8347e73e ("gue: Protocol constants for remote checksum offload")
Signed-off-by: Qihang <q.h.hack.winter@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b72f0db64205d9ce462038ba995d5d31eff32dc1 ]
When CONFIG_IP_MULTIPLE_TABLES is enabled but no rule is added,
fib_lookup() performs route lookup directly on two tables.
Since the first lookup does not properly bail out, the result
of an error route in the merged local/main table could be
overwritten by another route in the default table:
# unshare -n
# ip link set lo up
# ip route add 192.168.0.0/24 dev lo table 253
# ip route add unreachable 192.168.0.0/24
# ip route get 192.168.0.1
192.168.0.1 dev lo table default uid 0
cache <local>
Once a random rule is added, the error route is respected:
# ip rule add table 0
# ip rule del table 0
# ip route get 192.168.0.1
RTNETLINK answers: No route to host
Let's fix the inconsistent behaviour.
Fixes: f4530fa574df ("ipv4: Avoid overhead when no custom FIB rules are installed.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260619212753.3367244-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 93d7a7ed07342f5e3da2d250cfd67f899d0b5318 ]
This file contains the path discovery that is run from the forward chain
for the packet offloading the flow into the flowtable. This consists
of a series of calls to dev_fill_forward_path() for each device stack.
More topologies may be supported in the future, so move this code to its
own file to separate it from the nftables flow_offload expression.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: e409c23c2d06 ("netfilter: nft_flow_offload: zero device address for non-ether case")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bff1c8b49a9cb5c04af20f4e7d43bf4af5863bc6 ]
Blamed commit added NFT_META_BRI_IIFHWADDR to the set validate callback,
yet this is a get operation.
Add a get validate callback and move the NFT_META_BRI_IIFHWADDR key
there.
AFAICS this is harmless, NFT_META_BRI_IIFHWADDR can deal with a NULL
input device and the set handler ignores a NFT_META_BRI_IIFHWADDR
operation, but it allows to read 4 bytes off bridge skb->cb[].
Fixes: cbd2257dc96e ("netfilter: nft_meta_bridge: introduce NFT_META_BRI_IIFHWADDR support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7d8297e26b4e20b5d1c3c3fe51fe81a1c7fbc823 ]
SCTP_DIAG endpoint dumping was traversing endpoint address lists without
holding lock_sock(), while those lists could change concurrently via
socket operations (e.g., bindx changes). This creates a race where
nla_reserve() counts addresses under RCU protection, but the subsequent
copy may see fewer entries, potentially leaking uninitialized memory to
userspace.
Fix this by:
- Taking a reference on each endpoint during hash traversal
- Moving socket operations (lock_sock()) outside read_lock_bh()
- Serializing address list access during dump
- Reworking sctp_for_each_endpoint() to support restart-based traversal
with (net, pos) tracking
Also:
- Add WARN_ON_ONCE() for inconsistent address counts
- Fix idiag_states filtering for LISTEN vs association cases
- Skip dumping endpoints being freed (ep->base.dead)
- Move dump position tracking into iterator, removing cb->args[4] and
its comment for sctp_ep_dump().,
- Update the comment for cb->args[4] and remove the comment for unused
cb->args[5] for sctp_sock_dump().
Note: traversal is restart-based and may re-scan buckets multiple times,
but this is acceptable due to small bucket sizes and required to support
sleeping-safe callbacks.
This issue was reported by Nico Yip (@_cyeaa_) working with TrendAI Zero
Day Initiative.
Reported-by: Zero Day Initiative <zdi-disclosures@trendmicro.com>
Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/4c1b49ab87e0f7d552ebd8172b364b1994e913c9.1781552190.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 40f0b1047918539f0b0f795ac65e35336b4c2c78 ]
syzbot reported a shift-out-of-bounds in xfrm_selector_match()
due to AF_UNSPEC selector with large prefixlen (e.g. 128) matched
against IPv4 flow (when XFRM_STATE_AF_UNSPEC is set).
Fix this by:
- Rejecting mismatched families in xfrm_selector_match.
- Returning false in addr4_match if prefixlen > 32.
- Returning false in addr_match if prefixlen > 128 (prevents overflow).
Fixes: 3f0ab59e6537 ("xfrm: validate new SA's prefixlen using SA family when sel.family is unset")
Reported-by: syzbot+9383b1ff0df4b29ca5e6@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a2fbe35.be3f099c.2836ae.0018.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 68de007d5ac9df0e3f4f187a179c5c842bb5a2be ]
KCSAN reported a data race involving net->xfrm.policy_count access.
Add missing READ_ONCE()/WRITE_ONCE() annotations on
xfrm_policy_count and xfrm_policy_default.
Fixes: 2518c7c2b3d7 ("[XFRM]: Hash policies when non-prefixed.")
Reported-by: syzbot+d85ba1c732720b9a4097@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a2b9e96.99669fcc.12a77b.0006.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3f79dac3ea1c30516fcc791770af034387c7f917 ]
Master drivers may invoke i3c_master_do_daa_ext() during resume to
re-run Dynamic Address Assignment. As well as assigning addresses to
any newly arrived devices, this restores the dynamic address of devices
that lost it across system suspend, so it has to run as part of the
controller's resume path.
A side effect of i3c_master_do_daa_ext() today is that it also
registers any newly discovered I3C devices with the driver model
inline, via i3c_master_register_new_i3c_devs(). Doing that from the
resume path is problematic: a hot-join-capable device may join the bus
during this same DAA, and registering it immediately would push driver
model work (probing, sysfs, etc.) into the controller's resume context,
where the rest of the system is not yet fully resumed and the
controller driver is still partway through its own resume sequence.
Decouple discovery from registration: add a reg_work work item to
struct i3c_master_controller and have i3c_master_do_daa_ext() queue it
on master->wq (the freezable workqueue) instead of calling
i3c_master_register_new_i3c_devs() directly. The worker performs the
registration only when the controller is not shutting_down, and is
cancelled alongside hj_work in i3c_master_shutdown(). Because wq is
freezable, any newly observed devices end up being registered after
the system has finished resuming.
i3c_master_register() also routes its initial post-bus-init registration
through reg_work, using flush_work() to keep probe-time behavior
synchronous. This keeps a single registration code path and ensures the
worker is the only writer of desc->dev.
Fixes: 3a379bbcea0af ("i3c: Add core I3C infrastructure")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260608054312.10604-7-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8323e783dc3904839e64cb08cfcc7571ef9212c4 ]
System shutdown invokes each device's bus shutdown callback to quiesce
hardware, but the I3C bus type does not currently implement one. As a
result, on shutdown the controller's Hot-Join work and any in-flight
i3c_master_do_daa() can keep running (or be newly triggered) while the
rest of the system is being torn down.
A similar window exists at i3c_master_unregister() time: cancel_work_sync()
on hj_work prevents queued work from completing, but does not stop a
fresh Hot-Join IBI from re-queueing the worker, nor a concurrent sysfs
writer from toggling Hot-Join via i3c_set_hotjoin().
Introduce a single "shutting down" gate in the I3C core, set under the
bus maintenance lock so it is observed by any in-progress DAA path
before pending work is cancelled. Install an i3c_bus_type shutdown
callback that engages this gate for master devices during system
shutdown, and use the same gate in i3c_master_unregister() so both
paths get identical guarantees.
Once the gate is engaged, the Hot-Join worker, i3c_master_do_daa_ext()
and i3c_set_hotjoin() all bail out cleanly, so Hot-Join IBIs that race
with shutdown become no-ops, direct DAA callers see -ENODEV, and sysfs
writers can no longer re-enable Hot-Join through ops->enable_hotjoin()
while the controller is going away.
No functional change for the steady-state runtime path; the new checks
only take effect once the controller has been marked as shutting down.
Note, this patch depends on patch "i3c: master: Consolidate Hot-Join DAA
work in the core".
Fixes: 3a379bbcea0af ("i3c: Add core I3C infrastructure")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260608054312.10604-5-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 3f79dac3ea1c ("i3c: master: Defer new-device registration out of DAA caller context")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 828c6130235db8144f4810b329b61390dc82719b ]
Three master drivers (dw-i3c-master, i3c-master-cdns, svc-i3c-master)
each carry an essentially identical Hot-Join handler: a struct
work_struct embedded in their private state, a work function that just
calls i3c_master_do_daa() on the embedded i3c_master_controller, plus
matching INIT_WORK()/cancel_work_sync() boilerplate in probe/remove (and
shutdown for dw-i3c). The IBI/ISR paths then queue that work onto
master->wq, which already lives in the core.
Move this pattern into the I3C core:
- Add struct work_struct hj_work to struct i3c_master_controller and
initialise it in i3c_master_register() with a core-provided handler
i3c_master_hj_work_fn() that performs i3c_master_do_daa().
- Cancel the work in i3c_master_unregister() so all controllers get
correct teardown ordering against the workqueue for free.
- Export i3c_master_queue_hotjoin() as the single entry point drivers
call from their Hot-Join IBI handler.
Convert the three existing users to the new API: drop their private
hj_work fields, work functions, INIT_WORK() and cancel_work_sync()
calls, and replace the queue_work(master->wq, &drv->hj_work) call sites
with i3c_master_queue_hotjoin(&drv->base). The dw-i3c shutdown path
still needs to flush pending Hot-Join work before tearing down the
hardware, so it is updated to cancel master->base.hj_work directly.
No functional change intended: the work is still queued on the same
master->wq, runs the same i3c_master_do_daa(), and is cancelled at
controller teardown. Future Hot-Join improvements now only need to
be made in one place.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260608054312.10604-4-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 3f79dac3ea1c ("i3c: master: Defer new-device registration out of DAA caller context")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c481ef12e713fb7c292d04f53b3532ac0804ab3d ]
After system hibernation, I3C Dynamic Addresses may be reassigned at boot
and no longer match the values recorded before suspend. Introduce
i3c_master_do_daa_ext() to handle this situation.
The restore procedure is straightforward: issue a Reset Dynamic Address
Assignment (RSTDAA), then run the standard DAA sequence. The existing DAA
logic already supports detecting and updating devices whose dynamic
addresses differ from previously known values.
Refactor the DAA path by introducing a shared helper used by both the
normal i3c_master_do_daa() path and the new extended restore function,
and correct the kernel-doc in the process.
Export i3c_master_do_daa_ext() so that master drivers can invoke it from
their PM restore callbacks.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260123063325.8210-2-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 3f79dac3ea1c ("i3c: master: Defer new-device registration out of DAA caller context")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 990c149c61ee45da4fb6372e6b2fdd9808414e7a ]
Master drivers currently manage Runtime PM individually, but all require
runtime resume for bus operations. This can be centralized in common code.
Add optional Runtime PM support to ensure the parent device is runtime
resumed before bus operations and auto-suspended afterward.
Notably, do not call ->bus_cleanup() if runtime resume fails. Master
drivers that opt-in to core runtime PM support must take that into account.
Also provide an option to allow IBIs and hot-joins while runtime suspended.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-20-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 3f79dac3ea1c ("i3c: master: Defer new-device registration out of DAA caller context")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b58f47eb392680d4c6626c8b3b1fcf6412a0a02c ]
Document sysfs attribute dev_nack_retry_cnt that controls the number of
automatic retries performed by the I3C controller when a target device
returns a NACK
Add a `dev_nack_retry_count` sysfs attribute to allow reading and updating
the device NACK retry count. A new `dev_nack_retry_count` field and an
optional `set_dev_nack_retry()` callback are added to
i3c_master_controller. The attribute is created only when the callback is
implemented.
Updates are applied under the I3C bus maintenance lock to ensure safe
hardware reconfiguration.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/3c4b5082bde64024fc383c44bebeef89ad3c7ed3.1765529948.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 3f79dac3ea1c ("i3c: master: Defer new-device registration out of DAA caller context")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 527756cb9ebb277dca12fff00af9fbb3b9ec8cc8 ]
The I3C master workqueue (master->wq) is used to defer work that needs
thread context and the bus maintenance lock, most notably Hot Join
processing (which calls i3c_master_do_daa() to assign dynamic addresses
to newly joined devices).
Currently the workqueue keeps running across system suspend, which can
race with the suspend path:
- do_daa() may execute after the controller has been suspended,
issuing bus transactions on a powered-down or otherwise unusable
controller.
- New I3C devices can be enumerated and added to the bus mid-suspend,
registering driver model objects at a point where the I3C subsystem
and its consumers are not prepared to handle them.
Mark the workqueue WQ_FREEZABLE so its workers are frozen for the
duration of system suspend/hibernate and resumed afterwards. This
naturally defers any pending or newly queued Hot Join work until the
system (and the controller) is fully resumed, closing both races
without adding explicit suspend/resume synchronization in the master
drivers.
Update the kerneldoc for struct i3c_master_controller::wq to reflect
that the workqueue is freezable.
Fixes: 3a379bbcea0af ("i3c: Add core I3C infrastructure")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260608054312.10604-2-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b8460480f62e16751876a1f367dc14fb62867463 ]
Add support for MIPI I3C Host Controllers with the Multi-Bus Instance
capability. These controllers can host multiple I3C buses (up to 15)
within a single hardware function (e.g., PCIe B/D/F), providing one
indepedent HCI register set and corresponding I3C bus controller logic
per bus.
A separate platform device will represent each instance, but it is
necessary to allow for shared resources.
Multi-bus instances share the same MMIO address space, but the ranges are
not guaranteed to be contiguous. To avoid overlapping mappings, pass
base_regs from the parent mapping to child devices.
Allow the IRQ to be shared among instances.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260106164416.67074-8-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Stable-dep-of: 093eb8e73c90 ("i3c: mipi-i3c-hci: Preserve RUN bit when aborting DMA ring")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 353042d54d82f6c46449f0ee38c244b5a13c1fe4 ]
Preparatory refactor for ACPI-enumerated PMT endpoints. Several exported
PMT/VSEC interfaces and structs carried struct pci_dev * even though
callers only need a generic struct device. Move those to struct device * so
the same APIs work for PCI and ACPI parents.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://patch.msgid.link/20260313015202.3660072-5-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Stable-dep-of: 375bbbbd112a ("platform/x86/intel/vsec: Restore BAR fallback for header walk")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c62fd96a04e4a7b847448f97ecfe9f3fe706e7b3 ]
This refactor prepares for adding ACPI-enumerated PMT endpoints. While
intel_vsec is bound to PCI today, some helpers are used by code that will
also register PMT endpoints from non-PCI (ACPI) paths. Clean up
PCI-specific plumbing where it isn’t strictly required and rely on generic
struct device where possible.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patch.msgid.link/20260313015202.3660072-4-david.e.box@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Stable-dep-of: 375bbbbd112a ("platform/x86/intel/vsec: Restore BAR fallback for header walk")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 20e20b147cf7cb6780a5b95da2a0e37c52cd1015 ]
Fix kernel-doc warnings in intel_vsec.h to eliminate all kernel-doc
warnings:
Warning: include/linux/intel_vsec.h:92 struct member 'read_telem' not
described in 'pmt_callbacks'
Warning: include/linux/intel_vsec.h:146 expecting prototype for struct
intel_sec_device. Prototype was for struct intel_vsec_device instead
Warning: include/linux/intel_vsec.h:146 struct member 'priv_data_size'
not described in 'intel_vsec_device'
In struct pmt_callbacks, correct the kernel-doc for @read_telem.
kernel-doc doesn't support documenting callback function parameters,
so drop the '@' signs on those and use "* *" to make them somewhat
readable in the produced documentation output.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20251216063801.2896495-1-rdunlap@infradead.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Stable-dep-of: 375bbbbd112a ("platform/x86/intel/vsec: Restore BAR fallback for header walk")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4837fb36219e6c08b666bc31a86841bad8526358 ]
Lingfeng identified a bug and suggested two solutions, but both appear
to have issues.
Generally, we cannot release flc_lock while iterating over the file lock
list to avoid use-after-free (UAF) problems with file locks. However,
functions like nfs_delegation_claim_locks and nfs4_reclaim_locks cannot
adhere to this rule because recover_lock or nfs4_lock_delegation_recall
may take a long time. To resolve this, NFS switches to using nfsi->rwsem
for the same protection, and nfs_reclaim_locks follows this approach.
Although nfs_delegation_claim_locks uses so_delegreturn_mutex instead,
this is inadequate since a single inode can have multiple nfs4_state
instances. Therefore, the fix is to also use nfsi->rwsem in this case.
Furthermore, after commit c69899a17ca4 ("NFSv4: Update of VFS byte range
lock must be atomic with the stateid update"), the functions
nfs4_locku_done and nfs4_lock_done also break this rule because they
call locks_lock_inode_wait without holding nfsi->rwsem. Simply adding
this protection could cause many deadlocks, so instead, the call to
locks_lock_inode_wait is moved into _nfs4_proc_setlk. Regarding the bug
fixed by commit c69899a17ca4 ("NFSv4: Update of VFS byte range
lock must be atomic with the stateid update"), it has been resolved
after commit 0460253913e5 ("NFSv4: nfs4_do_open() is incorrectly triggering
state recovery") because all slots are drained before calling
nfs4_do_reclaim, which prevents concurrent stateid changes along this path.
Also, nfs_delegation_claim_locks does not cause this concurrency either
since when _nfs4_proc_setlk is called with NFS_DELEGATED_STATE, no RPC is
sent, so nfs4_lock_done is not called. Therefore,
nfs4_lock_delegation_recall from nfs_delegation_claim_locks is the first
time the stateid is set.
Reported-by: Li Lingfeng <lilingfeng3@huawei.com>
Closes: https://lore.kernel.org/all/20250419085709.1452492-1-lilingfeng3@huawei.com/
Closes: https://lore.kernel.org/all/20250715030559.2906634-1-lilingfeng3@huawei.com/
Fixes: c69899a17ca4 ("NFSv4: Update of VFS byte range lock must be atomic with the stateid update")
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3ff72e1cdf5c337b6acfcf3fcef748c5b9a5316b ]
When a read request is split into multiple subrequests, earlier
completions may advance PG_UPTODATE state for the page group once
their bytes fall within hdr->good_bytes. If a later subrequest in
the same group then completes with NFS_IOHDR_ERROR, the read path
needs to clear any accumulated PG_UPTODATE state and keep later
completions from rebuilding it.
Otherwise, a subsequent successful subrequest can re-enter
nfs_page_group_set_uptodate(), restore the page-group sync state,
and leave stale PG_UPTODATE behind for nfs_page_group_destroy()
to trip over in nfs_free_request().
Add a sticky page-group read-failed flag. Once any subrequest in
the group is known to be bad, mark the group failed, clear any
accumulated PG_UPTODATE state, and refuse further PG_UPTODATE
synchronization for the rest of the completion walk.
Fixes: 67d0338edd71 ("nfs: page group syncing in read path")
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 765bde47fe7f197dabeb12da76831f40d0b20377 ]
xprt_rdma_alloc_slot() and xprt_rdma_free_slot() lack serialization
between the buffer pool and the backlog queue. A buffer freed
after rpcrdma_buffer_get() finds the pool empty but before
rpc_sleep_on() places the task on the backlog is returned to the
pool with no waiter to wake, leaving the task stuck on the backlog
indefinitely.
After joining the backlog, re-check the pool and route any
recovered buffer through xprt_wake_up_backlog(), whose queue lock
serializes with concurrent wakeups and avoids double-assignment
of slots.
Because xprt_rdma_free_slot() does not hold reserve_lock, the
XPRT_CONGESTED double-check in xprt_throttle_congested() is
ineffective: a task can join the backlog through that path after
free_slot has already found it empty and cleared the bit. Avoid
this by using xprt_add_backlog_noncongested(), which queues the
task without setting XPRT_CONGESTED, so every allocation reaches
xprt_rdma_alloc_slot() and its post-sleep re-check.
Fixes: edb41e61a54e ("xprtrdma: Make rpc_rqst part of rpcrdma_req")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Stable-dep-of: e786233d2e0b ("xprtrdma: Decouple req recycling from RPC completion")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 97a5e120be5d3d7cf7d221b8703921046b73f0d2 ]
Add X1P42100 camera clock controller support and clock bindings
for camera QDSS debug clocks which are applicable for both X1E80100
and X1P42100 platforms.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jagadeesh Kona <jagadeesh.kona@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-purwa-videocc-camcc-v5-2-fc3af4130282@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 1e6ae74ac6f2 ("clk: qcom: camcc-x1e80100: Add support for camera QDSS debug clocks")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8341c989ac77d712c7d6e2bce29e8a4bcb2eeae4 ]
Use msg->msg_namelen as a place holder instead of a
temporary variable, notably in inet[6]_recvmsg().
This removes stack canaries and allows tail-calls.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux
add/remove: 0/0 grow/shrink: 2/19 up/down: 26/-532 (-506)
Function old new delta
rawv6_recvmsg 744 767 +23
vsock_dgram_recvmsg 55 58 +3
vsock_connectible_recvmsg 50 47 -3
unix_stream_recvmsg 161 158 -3
unix_seqpacket_recvmsg 62 59 -3
unix_dgram_recvmsg 42 39 -3
tcp_recvmsg 546 543 -3
mptcp_recvmsg 1568 1565 -3
ping_recvmsg 806 800 -6
tcp_bpf_recvmsg_parser 983 974 -9
ip_recv_error 588 576 -12
ipv6_recv_rxpmtu 442 428 -14
udp_recvmsg 1243 1224 -19
ipv6_recv_error 1046 1024 -22
udpv6_recvmsg 1487 1461 -26
raw_recvmsg 465 437 -28
udp_bpf_recvmsg 1027 984 -43
sock_common_recvmsg 103 27 -76
inet_recvmsg 257 175 -82
inet6_recvmsg 257 175 -82
tcp_bpf_recvmsg 663 568 -95
Total: Before=25143834, After=25143328, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260227151120.1346573-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: c010995b29c8 ("sockmap: Fix use-after-free in udp_bpf_recvmsg()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 711696b3e168cea4165e7b7f051f3f442a347430 ]
Allow drivers to register DPLL pins without manually specifying a pin
index.
Currently, drivers must provide a unique pin index when calling
dpll_pin_get(). This works well for hardware-mapped pins but creates
friction for drivers handling virtual pins or those without a strict
hardware indexing scheme.
Introduce DPLL_PIN_IDX_UNSPEC (U32_MAX). When a driver passes this
value as the pin index:
1. The core allocates a unique index using an IDA
2. The allocated index is mapped to a range starting above `INT_MAX`
This separation ensures that dynamically allocated indices never collide
with standard driver-provided hardware indices, which are assumed to be
within the `0` to `INT_MAX` range. The index is automatically freed when
the pin is released in dpll_pin_put().
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://patch.msgid.link/20260203174002.705176-5-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 32239d600236 ("dpll: fix stale iteration in dpll_pin_on_pin_unregister()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4c71303c837449158815c521fcee4ec3b8721dbd ]
When a cgroup BPF program exits with 0, bpf_prog_run_array_cg() sets
the hook return value to -EPERM if it is not a valid errno. This is
correct for errno-based hooks, which return 0 on success and negative
errno on failure, but wrong for boolean and void LSM hooks. Boolean
LSM hooks should only return true or false, and void LSM hooks have
no return value at all.
Fix it by skipping setting -EPERM for hooks not returning errno.
Fixes: 69fd337a975c ("bpf: per-cgroup lsm flavor")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Link: https://lore.kernel.org/r/20260610201724.733943-2-xukuohai@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8eed5519e496b7a07f441a0f579cb228a33189f7 ]
Blamed commit converted the untracked dev_hold()/dev_put() calls
in the watchdog code to use the tracked dev_hold_track()/dev_put_track()
(which were later renamed/interfaced to netdev_hold() and netdev_put()).
By introducing dev->watchdog_dev_tracker to store the
reference tracking information without adding synchronization
between netdev_watchdog_up() and dev_watchdog(), it enabled the
race condition where this pointer could be overwritten or freed
concurrently, leading to the list corruption crash syzbot reported:
list_del corruption, ffff888114a18c00->next is NULL
kernel BUG at lib/list_debug.c:52 !
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 1 UID: 0 PID: 91 Comm: kworker/u8:5 Not tainted syzkaller #0 PREEMPT(lazy)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/09/2026
Workqueue: events_unbound linkwatch_event
RIP: 0010:__list_del_entry_valid_or_report.cold+0x22/0x2a lib/list_debug.c:52
Call Trace:
<TASK>
__list_del_entry_valid include/linux/list.h:132 [inline]
__list_del_entry include/linux/list.h:246 [inline]
list_move_tail include/linux/list.h:341 [inline]
ref_tracker_free+0x1a7/0x6c0 lib/ref_tracker.c:329
netdev_tracker_free include/linux/netdevice.h:4491 [inline]
netdev_put include/linux/netdevice.h:4508 [inline]
netdev_put include/linux/netdevice.h:4504 [inline]
netdev_watchdog_down net/sched/sch_generic.c:600 [inline]
dev_deactivate_many+0x28c/0xfe0 net/sched/sch_generic.c:1363
dev_deactivate+0x109/0x1d0 net/sched/sch_generic.c:1397
linkwatch_do_dev net/core/link_watch.c:184 [inline]
linkwatch_do_dev+0xd3/0x120 net/core/link_watch.c:166
__linkwatch_run_queue+0x3a5/0x810 net/core/link_watch.c:240
linkwatch_event+0x8f/0xc0 net/core/link_watch.c:314
process_one_work+0xa0e/0x1980 kernel/workqueue.c:3314
process_scheduled_works kernel/workqueue.c:3397 [inline]
worker_thread+0x5ef/0xe50 kernel/workqueue.c:3478
kthread+0x370/0x450 kernel/kthread.c:436
ret_from_fork+0x69a/0xc80 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
This patch has three coordinated parts:
1) Add dev->watchdog_lock and dev->watchdog_ref_held to serialize watchdog operations.
2) Remove netdev_watchdog_up() call from netif_carrier_on():
This ensures netdev_watchdog_up() is only called from process/BH context
(via linkwatch workqueue dev_activate()), allowing us to use
spin_lock_bh() for synchronization.
3) Synchronize watchdog up and watchdog timer:
Protect netdev_watchdog_up() with tx_global_lock and watchdog_lock.
Only allocate a new tracker in netdev_watchdog_up() if one is
not already present.
In dev_watchdog(), ensure we don't release the tracker if the
timer was rescheduled either by dev_watchdog() itself or concurrently
by netdev_watchdog_up().
Fixes: f12bf6f3f942 ("net: watchdog: add net device refcount tracker")
Reported-by: syzbot+381d82bbf0253710b35d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/6a26b751.c25708ab.1b19ef.0013.GAE@google.com/T/#u
Tested-by: syzbot+3479efbc2821cb2a79f2@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260611152737.2580480-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 990348e5bb457697c2f1f7f7b65154a3334d9d2b ]
A child socket inherits the listener's bpf_sock_ops_cb_flags via
sk_clone_lock(). If its setup fails in tcp_v4_syn_recv_sock() /
tcp_v6_syn_recv_sock(), the child is freed through put_and_exit, where
inet_csk_prepare_forced_close() drops the socket lock and tcp_done() runs
without it.
If BPF_SOCK_OPS_STATE_CB_FLAG was inherited, tcp_done() -> tcp_set_state()
calls tcp_call_bpf(), which expects the lock and trips sock_owned_by_me():
WARNING: include/net/sock.h:1799 at tcp_set_state+0x433/0x550
RIP: 0010:tcp_set_state+0x433/0x550 include/net/sock.h:1799
Call Trace:
<IRQ>
tcp_done+0xba/0x250 net/ipv4/tcp.c:5095
tcp_v4_syn_recv_sock+0x850/0xa50 net/ipv4/tcp_ipv4.c:1787
tcp_check_req+0xf30/0x1360 net/ipv4/tcp_minisocks.c:926
tcp_v4_rcv+0x1047/0x1b50 net/ipv4/tcp_ipv4.c:2164
</IRQ>
The child is freed before it is ever established, so it should run no
sock_ops callback. Clear its cb flags in inet_csk_prepare_for_destroy_sock(),
the common point for the IPv4, IPv6 and chtls forced-close paths and for the
MPTCP ->syn_recv_sock() failure path (dispose_child), which reaches tcp_done()
on a child that was never established too.
Suggested-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Fixes: d44874910a26 ("bpf: Add BPF_SOCK_OPS_STATE_CB")
Signed-off-by: Sechang Lim <rhkrqnwk98@gmail.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260611092923.1895982-1-rhkrqnwk98@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e28bee5b445178390d63f7a93a5a219063c6434e ]
iommu_copy_struct_from_full_user_array() copies a whole user array into a
kernel buffer. In the common case, where user entry_len equals destination
entry size, it takes a fast path and copies the whole array with a single
copy_from_user().
That fast path does not return, so it falls through into the item-by-item
copy_struct_from_user() loop and copies every entry a second time. For an
equal entry_len that loop is just a copy_from_user() of the same bytes, so
the whole array is copied twice for no benefit.
Return right after the bulk copy. The per-item loop then runs only on the
slow path, where entry_len differs and each entry needs size adaption.
Fixes: 4f2e59ccb698 ("iommu: Add iommu_copy_struct_from_full_user_array helper")
Link: https://patch.msgid.link/r/6c9eca4ff584cb977661e97799ac6fe934e7f51c.1780521606.git.nicolinc@nvidia.com
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2821e85c058f81c9948a2fb1a634f7b47457d51c ]
rocker_router_fib_event() calls fib_rule_get() during RCU dump.
If the fib_rule is dying, refcount_inc() will complain about it.
Let's call refcount_inc_not_zero() in fib_rules_dump().
Fixes: 5d7bfd141924 ("ipv4: fib_rules: Dump FIB rules when registering FIB notifier")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20260610061744.2030996-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 32b0b8953343eaceaa816a9ead3b6bb66355c64e ]
When an 802.3ad (LACP) bonding interface has no slaves in the
collecting/distributing state, the bonding master still reports
carrier as up as long as at least 'min_links' slaves have carrier.
In this situation, only one slave is effectively used for TX/RX,
while traffic received on other slaves is dropped. Upper-layer
daemons therefore consider the interface operational, even though
traffic may be blackholed if the lack of LACP negotiation means
the partner is not ready to deal with traffic.
Introduce a configuration knob to control this behavior. It allows
the bonding master to assert carrier only when at least 'min_links'
slaves are in Collecting_Distributing state.
The default mode preserves the existing behavior. This patch only
introduces the knob; its behavior is implemented in the subsequent
commit.
Fixes: 655f8919d549 ("bonding: add min links parameter to 802.3ad")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20260603150331.1919611-4-louis.scalbert@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c5d6cac28646b0d5d81ef632be748ae93c1f36c7 ]
Commit e1c5ae59c0f2 ("fs: don't allow non-init s_user_ns for filesystems
without FS_USERNS_MOUNT") prevents the mount of any filesystem inside a
container that doesn't have FS_USERNS_MOUNT set.
This broke NFS mounts in our containerized environment. We have a daemon
somewhat like systemd-mountfsd running in the init_ns. A process does a
fsopen() inside the container and passes it to the daemon via unix
socket.
The daemon then vets that the request is for an allowed NFS server and
performs the mount. This now fails because the fc->user_ns is set to the
value in the container and NFS doesn't set FS_USERNS_MOUNT. We don't
want to add FS_USERNS_MOUNT to NFS since that would allow the container
to mount any NFS server (even malicious ones).
Add a new FS_USERNS_DELEGATABLE flag, and enable it on NFS.
Fixes: e1c5ae59c0f2 ("fs: don't allow non-init s_user_ns for filesystems without FS_USERNS_MOUNT")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://patch.msgid.link/20260129-twmount-v1-1-4874ed2a15c4@kernel.org
Acked-by: Anna Schumaker <anna.schumaker@oracle.com>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@futurfusion.io>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c55dd3b46c1208d6d2ea737a8aefef4aa4c70cb8 ]
find_vm_area() can return NULL if the given address is not a valid vmalloc
area. Check the return value before dereferencing it to avoid a kernel
crash.
Link: https://lore.kernel.org/20260529014130.671291-1-hui.zhu@linux.dev
Fixes: 121e6f3258fe ("mm/vmalloc: hugepage vmalloc mappings")
Signed-off-by: Hui Zhu <zhuhui@kylinos.cn>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 786be2b05980a5828e67fc564ad7517e2adbe9bd ]
Since there're 4 bytes padding at the end of struct bpf_prog_info, they
won't be checked by bpf_check_uarg_tail_zero().
pahole -C bpf_prog_info ./vmlinux
struct bpf_prog_info {
...
__u32 attach_btf_obj_id; /* 220 4 */
__u32 attach_btf_id; /* 224 4 */
/* size: 232, cachelines: 4, members: 38 */
/* sum members: 224 */
/* sum bitfield members: 1 bits, bit holes: 1, sum bit holes: 31 bits */
/* padding: 4 */
/* forced alignments: 9 */
/* last cacheline: 40 bytes */
} __attribute__((__aligned__(8)));
If a future kernel extension adds a new 4-byte field, older userspace
programs allocating this structure on the stack might inadvertently pass
uninitialized stack garbage into the new field, permanently breaking
backward compatibility. -- sashiko [1]
Fix it by changing sizeof(info) to
offsetofend(struct bpf_prog_info, attach_btf_id).
And, add "__u32 :32" to the tail of struct bpf_prog_info.
[1] https://lore.kernel.org/bpf/20260513224823.6494FC19425@smtp.kernel.org/
Fixes: aba64c7da983 ("bpf: Add verified_insns to bpf_prog_info and fdinfo")
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260605155249.20772-3-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
