| Age | Commit message (Collapse) | Author |
|---|
|
Nicolas's patch missed this, now generating docbook warnings.
Add the missing descriptions to address that.
Fixes: 2dad624e6dd6 ("wireless: use nla_put_u64_64bit()")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for the a station statistics netlink attribute:
NL80211_STA_INFO_RX_DURATION.
If present, this attribute contains the aggregate PPDU duration (in
microseconds) for all the frames from the peer. This is useful to
help understand the total time spent transmitting to us by all of
the connected peers.
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Support checksum neutral ILA as described in the ILA draft. The low
order 16 bits of the identifier are used to contain the checksum
adjustment value.
The csum-mode parameter is added to described checksum processing. There
are three values:
- adjust transport checksum (previous behavior)
- do checksum neutral mapping
- do nothing
On output the csum-mode in the ila_params is checked and acted on. If
mode is checksum neutral mapping then to mapping and set C-bit.
On input, C-bit is checked. If it is set checksum-netural mapping is
done (regardless of csum-mode in ila params) and C-bit will be cleared.
If it is not set then action in csum-mode is taken.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts the following three commits:
70af921db6f8835f4b11c65731116560adb00c14
799977d9aafbf0ca0b9c39b04cbfb16db71302c9
f1705ec197e705b79ea40fe7a2cc5acfa1d3bfac
The feature was ill conceived, has terrible semantics, and has added
nothing but regressions to the already fragile ipv6 stack.
Fixes: f1705ec197e7 ("net: ipv6: Make address flushing on ifdown optional")
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We want the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The VSync polarity was negative instead of positive for the 4k CEA formats.
I probably copy-and-pasted these from the DMT 4k format, which does have a
negative VSync polarity.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Martin Bugge <marbugge@cisco.com>
Cc: <stable@vger.kernel.org> # for v4.1 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Most of what is marked as 'experimental' has been around for years. Time
to drop that annotation.
The only remaining 'experimental' bits of the API are the debug ioctls
and structs: these should remain experimental since the only application
that should use this is v4l2-dbg.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
I accidentally forgot some MACSEC_ prefixes in if_macsec.h.
Fixes: dece8d2b78d1 ("uapi: add MACsec bits")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
nla_data() is now aligned on a 64-bit area.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
nla_data() is now aligned on a 64-bit area.
The temporary function nla_put_be64_32bit() is removed in this patch.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
nla_data() is now aligned on a 64-bit area.
A temporary version (nla_put_be64_32bit()) is added for nla_put_net64().
This function is removed in the next patch.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Conflicts were two cases of simple overlapping changes,
nothing serious.
In the UDP case, we need to add a hlist_add_tail_rcu()
to linux/rculist.h, because we've moved UDP socket handling
away from using nulls lists.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch introduces 'write_backward' bit to perf_event_attr, which
controls the direction of a ring buffer. After set, the corresponding
ring buffer is written from end to beginning. This feature is design to
support reading from overwritable ring buffer.
Ring buffer can be created by mapping a perf event fd. Kernel puts event
records into ring buffer, user tooling like perf fetch them from
address returned by mmap(). To prevent racing between kernel and tooling,
they communicate to each other through 'head' and 'tail' pointers.
Kernel maintains 'head' pointer, points it to the next free area (tail
of the last record). Tooling maintains 'tail' pointer, points it to the
tail of last consumed record (record has already been fetched). Kernel
determines the available space in a ring buffer using these two
pointers to avoid overwrite unfetched records.
By mapping without 'PROT_WRITE', an overwritable ring buffer is created.
Different from normal ring buffer, tooling is unable to maintain 'tail'
pointer because writing is forbidden. Therefore, for this type of ring
buffers, kernel overwrite old records unconditionally, works like flight
recorder. This feature would be useful if reading from overwritable ring
buffer were as easy as reading from normal ring buffer. However,
there's an obscure problem.
The following figure demonstrates a full overwritable ring buffer. In
this figure, the 'head' pointer points to the end of last record, and a
long record 'E' is pending. For a normal ring buffer, a 'tail' pointer
would have pointed to position (X), so kernel knows there's no more
space in the ring buffer. However, for an overwritable ring buffer,
kernel ignore the 'tail' pointer.
(X) head
. |
. V
+------+-------+----------+------+---+
|A....A|B.....B|C........C|D....D| |
+------+-------+----------+------+---+
Record 'A' is overwritten by event 'E':
head
|
V
+--+---+-------+----------+------+---+
|.E|..A|B.....B|C........C|D....D|E..|
+--+---+-------+----------+------+---+
Now tooling decides to read from this ring buffer. However, none of these
two natural positions, 'head' and the start of this ring buffer, are
pointing to the head of a record. Even the full ring buffer can be
accessed by tooling, it is unable to find a position to start decoding.
The first attempt tries to solve this problem AFAIK can be found from
[1]. It makes kernel to maintain 'tail' pointer: updates it when ring
buffer is half full. However, this approach introduces overhead to
fast path. Test result shows a 1% overhead [2]. In addition, this method
utilizes no more tham 50% records.
Another attempt can be found from [3], which allows putting the size of
an event at the end of each record. This approach allows tooling to find
records in a backward manner from 'head' pointer by reading size of a
record from its tail. However, because of alignment requirement, it
needs 8 bytes to record the size of a record, which is a huge waste. Its
performance is also not good, because more data need to be written.
This approach also introduces some extra branch instructions to fast
path.
'write_backward' is a better solution to this problem.
Following figure demonstrates the state of the overwritable ring buffer
when 'write_backward' is set before overwriting:
head
|
V
+---+------+----------+-------+------+
| |D....D|C........C|B.....B|A....A|
+---+------+----------+-------+------+
and after overwriting:
head
|
V
+---+------+----------+-------+---+--+
|..E|D....D|C........C|B.....B|A..|E.|
+---+------+----------+-------+---+--+
In each situation, 'head' points to the beginning of the newest record.
From this record, tooling can iterate over the full ring buffer and fetch
records one by one.
The only limitation that needs to be considered is back-to-back reading.
Due to the non-deterministic of user programs, it is impossible to ensure
the ring buffer keeps stable during reading. Consider an extreme situation:
tooling is scheduled out after reading record 'D', then a burst of events
come, eat up the whole ring buffer (one or multiple rounds). When the
tooling process comes back, reading after 'D' is incorrect now.
To prevent this problem, we need to find a way to ensure the ring buffer
is stable during reading. ioctl(PERF_EVENT_IOC_PAUSE_OUTPUT) is
suggested because its overhead is lower than
ioctl(PERF_EVENT_IOC_ENABLE).
By carefully verifying 'header' pointer, reader can avoid pausing the
ring-buffer. For example:
/* A union of all possible events */
union perf_event event;
p = head = perf_mmap__read_head();
while (true) {
/* copy header of next event */
fetch(&event.header, p, sizeof(event.header));
/* read 'head' pointer */
head = perf_mmap__read_head();
/* check overwritten: is the header good? */
if (!verify(sizeof(event.header), p, head))
break;
/* copy the whole event */
fetch(&event, p, event.header.size);
/* read 'head' pointer again */
head = perf_mmap__read_head();
/* is the whole event good? */
if (!verify(event.header.size, p, head))
break;
p += event.header.size;
}
However, the overhead is high because:
a) In-place decoding is not safe.
Copying-verifying-decoding is required.
b) Fetching 'head' pointer requires additional synchronization.
(From Alexei Starovoitov:
Even when this trick works, pause is needed for more than stability of
reading. When we collect the events into overwrite buffer we're waiting
for some other trigger (like all cpu utilization spike or just one cpu
running and all others are idle) and when it happens the buffer has
valuable info from the past. At this point new events are no longer
interesting and buffer should be paused, events read and unpaused until
next trigger comes.)
This patch utilizes event's default overflow_handler introduced
previously. perf_event_output_backward() is created as the default
overflow handler for backward ring buffers. To avoid extra overhead to
fast path, original perf_event_output() becomes __perf_event_output()
and marked '__always_inline'. In theory, there's no extra overhead
introduced to fast path.
Performance testing:
Calling 3000000 times of 'close(-1)', use gettimeofday() to check
duration. Use 'perf record -o /dev/null -e raw_syscalls:*' to capture
system calls. In ns.
Testing environment:
CPU : Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz
Kernel : v4.5.0
MEAN STDVAR
BASE 800214.950 2853.083
PRE1 2253846.700 9997.014
PRE2 2257495.540 8516.293
POST 2250896.100 8933.921
Where 'BASE' is pure performance without capturing. 'PRE1' is test
result of pure 'v4.5.0' kernel. 'PRE2' is test result before this
patch. 'POST' is test result after this patch. See [4] for the detailed
experimental setup.
Considering the stdvar, this patch doesn't introduce performance
overhead to the fast path.
[1] http://lkml.iu.edu/hypermail/linux/kernel/1304.1/04584.html
[2] http://lkml.iu.edu/hypermail/linux/kernel/1307.1/00535.html
[3] http://lkml.iu.edu/hypermail/linux/kernel/1512.0/01265.html
[4] http://lkml.kernel.org/g/56F89DCD.1040202@huawei.com
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Cc: <acme@kernel.org>
Cc: <pi3orama@163.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1459865478-53413-1-git-send-email-wangnan0@huawei.com
[ Fixed the changelog some more. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds a new RTM_GETSTATS message to query link stats via netlink
from the kernel. RTM_NEWLINK also dumps stats today, but RTM_NEWLINK
returns a lot more than just stats and is expensive in some cases when
frequent polling for stats from userspace is a common operation.
RTM_GETSTATS is an attempt to provide a light weight netlink message
to explicity query only link stats from the kernel on an interface.
The idea is to also keep it extensible so that new kinds of stats can be
added to it in the future.
This patch adds the following attribute for NETDEV stats:
struct nla_policy ifla_stats_policy[IFLA_STATS_MAX + 1] = {
[IFLA_STATS_LINK_64] = { .len = sizeof(struct rtnl_link_stats64) },
};
Like any other rtnetlink message, RTM_GETSTATS can be used to get stats of
a single interface or all interfaces with NLM_F_DUMP.
Future possible new types of stat attributes:
link af stats:
- IFLA_STATS_LINK_IPV6 (nested. for ipv6 stats)
- IFLA_STATS_LINK_MPLS (nested. for mpls/mdev stats)
extended stats:
- IFLA_STATS_LINK_EXTENDED (nested. extended software netdev stats like bridge,
vlan, vxlan etc)
- IFLA_STATS_LINK_HW_EXTENDED (nested. extended hardware stats which are
available via ethtool today)
This patch also declares a filter mask for all stat attributes.
User has to provide a mask of stats attributes to query. filter mask
can be specified in the new hdr 'struct if_stats_msg' for stats messages.
Other important field in the header is the ifindex.
This api can also include attributes for global stats (eg tcp) in the future.
When global stats are included in a stats msg, the ifindex in the header
must be zero. A single stats message cannot contain both global and
netdev specific stats. To easily distinguish them, netdev specific stat
attributes name are prefixed with IFLA_STATS_LINK_
Without any attributes in the filter_mask, no stats will be returned.
This patch has been tested with mofified iproute2 ifstat.
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
New field (IFLA_HSR_VERSION) was added in the middle of an existing
ENUM and would break kernel ABI, therefore moved to the end.
Reported by Stephen Hemminger.
Signed-off-by: Peter Heise <peter.heise@airbus.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a BPF_F_CURRENT_CPU flag to optimize the use-case where user space has
per-CPU ring buffers and the eBPF program pushes the data into the current
CPU's ring buffer which saves us an extra helper function call in eBPF.
Also, make sure to properly reserve the remaining flags which are not used.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the nlattr header is 4 bytes in size, it can cause the netlink
attribute payload to not be 8-byte aligned.
This is particularly troublesome for IFLA_STATS64 which contains 64-bit
statistic values.
Solve this by creating a dummy IFLA_PAD attribute which has a payload
which is zero bytes in size. When HAVE_EFFICIENT_UNALIGNED_ACCESS is
false, we insert an IFLA_PAD attribute into the netlink response when
necessary such that the IFLA_STATS64 payload will be properly aligned.
With help and suggestions from Eric Dumazet.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds the feature selectors from Table 9-8
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This takes the definitions of requests from chapter 9.3.1
of the USB Power Delivery spec.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Adding the descriptors of chapter 9.2 of the Power Delivery spec.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This one will implement all the interface of inet_diag, inet_diag_handler.
which includes sctp_diag_dump, sctp_diag_dump_one and sctp_diag_get_info.
It will work as a module, and register inet_diag_handler when loading.
v2->v3:
- fix the mistake in inet_assoc_attr_size().
- change inet_diag_msg_laddrs_fill() name to inet_diag_msg_sctpladdrs_fill.
- change inet_diag_msg_paddrs_fill() name to inet_diag_msg_sctpaddrs_fill.
- add inet_diag_msg_sctpinfo_fill() to make asoc/ep fill code clearer.
- add inet_diag_msg_sctpasoc_fill() to make asoc fill code clearer.
- merge inet_asoc_diag_fill() and inet_ep_diag_fill() to
inet_sctp_diag_fill().
- call sctp_diag_get_info() directly, instead by handler, cause the caller
is in the same file with it.
- call lock_sock in sctp_tsp_dump_one() to make sure we call get sctp info
safely.
- after lock_sock(sk), we should check sk != assoc->base.sk.
- change mem[SK_MEMINFO_WMEM_ALLOC] to asoc->sndbuf_used for asoc dump when
asoc->ep->sndbuf_policy is set. don't use INET_DIAG_MEMINFO attr any more.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support for the newer version 1 of the HSR
networking standard. Version 0 is still default and the new
version has to be selected via iproute2.
Main changes are in the supervision frame handling and its
ethertype field.
Signed-off-by: Peter Heise <peter.heise@airbus.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
User needs to monitor shared buffer occupancy. For that, he issues a
snapshot command in order to instruct hardware to catch current and
maximal occupancy values, and clear command in order to clear the
historical maximal values.
Also port-pool and tc-pool-bind command response messages are extended to
carry occupancy values.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Define userspace API and drivers API for configuration of shared
buffers. Four basic objects are defined:
shared buffer - attributes are size, number of pools and TCs
pool - chunk of sharedbuffer definition, it has some size and either
static or dynamic threshold
port pool threshold - to set per-port threshold for each pool
port tc threshold bind - to bind port and TC to specified pool
with threshold.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
To synchronize with Kalle, here's just a big change that affects
all drivers - removing the duplicated enum ieee80211_band and
replacing it by enum nl80211_band. On top of that, just a small
documentation update.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains the first batch of Netfilter updates for
your net-next tree.
1) Define pr_fmt() in nf_conntrack, from Weongyo Jeong.
2) Define and register netfilter's afinfo for the bridge family,
this comes in preparation for native nfqueue's bridge for nft,
from Stephane Bryant.
3) Add new attributes to store layer 2 and VLAN headers to nfqueue,
also from Stephane Bryant.
4) Parse new NFQA_VLAN and NFQA_L2HDR nfqueue netlink attributes
coming from userspace, from Stephane Bryant.
5) Use net->ipv6.devconf_all->hop_limit instead of hardcoded hop_limit
in IPv6 SYNPROXY, from Liping Zhang.
6) Remove unnecessary check for dst == NULL in nf_reject_ipv6,
from Haishuang Yan.
7) Deinline ctnetlink event report functions, from Florian Westphal.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds userspace access to Diffie-Hellman computations through a
new keyctl() syscall command to calculate shared secrets or public
keys using input parameters stored in the keyring.
Input key ids are provided in a struct due to the current 5-arg limit
for the keyctl syscall. Only user keys are supported in order to avoid
exposing the content of logon or encrypted keys.
The output is written to the provided buffer, based on the assumption
that the values are only needed in userspace.
Future support for other types of key derivation would involve a new
command, like KEYCTL_ECDH_COMPUTE.
Once Diffie-Hellman support is included in the crypto API, this code
can be converted to use the crypto API to take advantage of possible
hardware acceleration and reduce redundant code.
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
This enum is already perfectly aliased to enum nl80211_band, and
the only reason for it is that we get IEEE80211_NUM_BANDS out of
it. There's no really good reason to not declare the number of
bands in nl80211 though, so do that and remove the cfg80211 one.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The roaming cases for the Connect command were not fully covered and
neither Connect nor Associate command uses of the prev_bssid parameter
were very clear. Add details to describe how the prev_bssid argument is
supposed to be used and when the driver should use association or
reassociation.
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The new devlink.h in uapi was not being installed by
make headers_install
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Provide simulated SMART data to enable the ndctl implementation of SMART
data retrieval and parsing.
The payload is defined here, "Section 4.1 SMART and Health Info
(Function Index 1)":
http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
There is code out there in user space and kernel space which relies on
I2C_M_RD being bit 0 to simplify their bit operations. Add a comment to
make sure this will never break. Do proper sorting of the defines while
we are here.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
This resolves a lot of merge issues with PAGE_CACHE_* changes, and an
iio driver merge issue.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB fixes and new device ids for 4.6-rc3.
Nothing major, the normal USB gadget fixes and usb-serial driver ids,
along with some other fixes mixed in. All except the USB serial ids
have been tested in linux-next, the id additions should be fine as
they are 'trivial'"
* tag 'usb-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
USB: option: add "D-Link DWM-221 B1" device id
USB: serial: cp210x: Adding GE Healthcare Device ID
USB: serial: ftdi_sio: Add support for ICP DAS I-756xU devices
usb: dwc3: keystone: drop dma_mask configuration
usb: gadget: udc-core: remove manual dma configuration
usb: dwc3: pci: add ID for one more Intel Broxton platform
usb: renesas_usbhs: fix to avoid using a disabled ep in usbhsg_queue_done()
usb: dwc2: do not override forced dr_mode in gadget setup
usb: gadget: f_midi: unlock on error
USB: digi_acceleport: do sanity checking for the number of ports
USB: cypress_m8: add endpoint sanity check
USB: mct_u232: add sanity checking in probe
usb: fix regression in SuperSpeed endpoint descriptor parsing
USB: usbip: fix potential out-of-bounds write
usb: renesas_usbhs: disable TX IRQ before starting TX DMAC transfer
usb: renesas_usbhs: avoid NULL pointer derefernce in usbhsf_pkt_handler()
usb: gadget: f_midi: Fixed a bug when buflen was smaller than wMaxPacketSize
usb: phy: qcom-8x16: fix regulator API abuse
usb: ch9: Fix SSP Device Cap wFunctionalitySupport type
usb: gadget: composite: Access SSP Dev Cap fields properly
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for v4.6-rc3
Here are some new device ids.
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
For the 4.7 cycle, we have a number of changes:
* Bob's mesh mode rhashtable conversion, this includes
the rhashtable API change for allocation flags
* BSSID scan, connect() command reassoc support (Jouni)
* fast (optimised data only) and support for RSS in mac80211 (myself)
* various smaller changes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
introduce BPF_PROG_TYPE_TRACEPOINT program type and allow it to be attached
to the perf tracepoint handler, which will copy the arguments into
the per-cpu buffer and pass it to the bpf program as its first argument.
The layout of the fields can be discovered by doing
'cat /sys/kernel/debug/tracing/events/sched/sched_switch/format'
prior to the compilation of the program with exception that first 8 bytes
are reserved and not accessible to the program. This area is used to store
the pointer to 'struct pt_regs' which some of the bpf helpers will use:
+---------+
| 8 bytes | hidden 'struct pt_regs *' (inaccessible to bpf program)
+---------+
| N bytes | static tracepoint fields defined in tracepoint/format (bpf readonly)
+---------+
| dynamic | __dynamic_array bytes of tracepoint (inaccessible to bpf yet)
+---------+
Not that all of the fields are already dumped to user space via perf ring buffer
and broken application access it directly without consulting tracepoint/format.
Same rule applies here: static tracepoint fields should only be accessed
in a format defined in tracepoint/format. The order of fields and
field sizes are not an ABI.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The VIRTIO 1.0 specification added the DEVICE_NEEDS_RESET device status
bit in "VIRTIO-98: Add DEVICE_NEEDS_RESET". This patch defines the
device status bit in the uapi header file so that both the kernel and
userspace applications can use it.
The bit is currently unused by the virtio guest drivers and vhost.
According to the spec "a good implementation will try to recover by
issuing a reset". This is not attempted here because it requires
auditing the virtio drivers to ensure there are no resource leaks or
crashes if the device needs to be reset mid-operation.
See "2.1 Device Status Field" in the VIRTIO 1.0 specification for
details.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
