| Age | Commit message (Collapse) | Author |
|---|
|
Introduce a ingress frame gate control flow action.
Tc gate action does the work like this:
Assume there is a gate allow specified ingress frames can be passed at
specific time slot, and be dropped at specific time slot. Tc filter
chooses the ingress frames, and tc gate action would specify what slot
does these frames can be passed to device and what time slot would be
dropped.
Tc gate action would provide an entry list to tell how much time gate
keep open and how much time gate keep state close. Gate action also
assign a start time to tell when the entry list start. Then driver would
repeat the gate entry list cyclically.
For the software simulation, gate action requires the user assign a time
clock type.
Below is the setting example in user space. Tc filter a stream source ip
address is 192.168.0.20 and gate action own two time slots. One is last
200ms gate open let frame pass another is last 100ms gate close let
frames dropped. When the ingress frames have reach total frames over
8000000 bytes, the excessive frames will be dropped in that 200000000ns
time slot.
> tc qdisc add dev eth0 ingress
> tc filter add dev eth0 parent ffff: protocol ip \
flower src_ip 192.168.0.20 \
action gate index 2 clockid CLOCK_TAI \
sched-entry open 200000000 -1 8000000 \
sched-entry close 100000000 -1 -1
> tc chain del dev eth0 ingress chain 0
"sched-entry" follow the name taprio style. Gate state is
"open"/"close". Follow with period nanosecond. Then next item is internal
priority value means which ingress queue should put. "-1" means
wildcard. The last value optional specifies the maximum number of
MSDU octets that are permitted to pass the gate during the specified
time interval.
Base-time is not set will be 0 as default, as result start time would
be ((N + 1) * cycletime) which is the minimal of future time.
Below example shows filtering a stream with destination mac address is
10:00:80:00:00:00 and ip type is ICMP, follow the action gate. The gate
action would run with one close time slot which means always keep close.
The time cycle is total 200000000ns. The base-time would calculate by:
1357000000000 + (N + 1) * cycletime
When the total value is the future time, it will be the start time.
The cycletime here would be 200000000ns for this case.
> tc filter add dev eth0 parent ffff: protocol ip \
flower skip_hw ip_proto icmp dst_mac 10:00:80:00:00:00 \
action gate index 12 base-time 1357000000000 \
sched-entry close 200000000 -1 -1 \
clockid CLOCK_TAI
Signed-off-by: Po Liu <Po.Liu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, bpf_getsockopt and bpf_setsockopt helpers operate on the
'struct bpf_sock_ops' context in BPF_PROG_TYPE_SOCK_OPS program.
Let's generalize them and make them available for 'struct bpf_sock_addr'.
That way, in the future, we can allow those helpers in more places.
As an example, let's expose those 'struct bpf_sock_addr' based helpers to
BPF_CGROUP_INET{4,6}_CONNECT hooks. That way we can override CC before the
connection is made.
v3:
* Expose custom helpers for bpf_sock_addr context instead of doing
generic bpf_sock argument (as suggested by Daniel). Even with
try_socket_lock that doesn't sleep we have a problem where context sk
is already locked and socket lock is non-nestable.
v2:
* s/BPF_PROG_TYPE_CGROUP_SOCKOPT/BPF_PROG_TYPE_SOCK_OPS/
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200430233152.199403-1-sdf@google.com
|
|
Not much to be done here:
- add SPDX header;
- adjust title markup;
- remove a tail whitespace;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull drm fixes from Dave Airlie:
"Regular scheduled fixes for graphics. Nothing to extreme bunch of
amdgpu fixes, i915 and qxl fixes, along with some misc ones.
All seems to be progressing normally.
core:
- EDID off by one DTD fix
- DP mst write return code fix
dma-buf:
- fix SET_NAME ioctl uapi
- doc fixes
amdgpu:
- Fix a green screen on resume issue
- PM fixes for SR-IOV SDMA fix for navi
- Renoir display fixes
- Cursor and pageflip stuttering fixes
- Misc additional display fixes
- (uapi) Add additional DCC tiling flags for navi1x
i915:
- Fix selftest refcnt leak (Xiyu)
- Fix gem vma lock (Chris)
- Fix gt's i915_request.timeline acquire by checking if cacheline is
valid (Chris)
- Fix IRQ postinistall fault masks (Matt)
qxl:
- use after gree fix
- fix lost kunmap
- release leak fix
virtio:
- context destruction fix"
* tag 'drm-fixes-2020-05-01' of git://anongit.freedesktop.org/drm/drm: (26 commits)
dma-buf: fix documentation build warnings
drm/qxl: qxl_release use after free
drm/qxl: lost qxl_bo_kunmap_atomic_page in qxl_image_init_helper()
drm/i915: Use proper fault mask in interrupt postinstall too
drm/amd/display: Use cursor locking to prevent flip delays
drm/amd/display: Update downspread percent to match spreadsheet for DCN2.1
drm/amd/display: Defer cursor update around VUPDATE for all ASIC
drm/amd/display: fix rn soc bb update
drm/amd/display: check if REFCLK_CNTL register is present
drm/amdgpu: bump version for invalidate L2 before SDMA IBs
drm/amdgpu: invalidate L2 before SDMA IBs (v2)
drm/amdgpu: add tiling flags from Mesa
drm/amd/powerplay: avoid using pm_en before it is initialized revised
Revert "drm/amd/powerplay: avoid using pm_en before it is initialized"
drm/qxl: qxl_release leak in qxl_hw_surface_alloc()
drm/qxl: qxl_release leak in qxl_draw_dirty_fb()
drm/virtio: only destroy created contexts
drm/dp_mst: Fix drm_dp_send_dpcd_write() return code
drm/i915/gt: Check cacheline is valid before acquiring
drm/i915/gem: Hold obj->vma.lock over for_each_ggtt_vma()
...
|
|
Currently, sysctl kernel.bpf_stats_enabled controls BPF runtime stats.
Typical userspace tools use kernel.bpf_stats_enabled as follows:
1. Enable kernel.bpf_stats_enabled;
2. Check program run_time_ns;
3. Sleep for the monitoring period;
4. Check program run_time_ns again, calculate the difference;
5. Disable kernel.bpf_stats_enabled.
The problem with this approach is that only one userspace tool can toggle
this sysctl. If multiple tools toggle the sysctl at the same time, the
measurement may be inaccurate.
To fix this problem while keep backward compatibility, introduce a new
bpf command BPF_ENABLE_STATS. On success, this command enables stats and
returns a valid fd. BPF_ENABLE_STATS takes argument "type". Currently,
only one type, BPF_STATS_RUN_TIME, is supported. We can extend the
command to support other types of stats in the future.
With BPF_ENABLE_STATS, user space tool would have the following flow:
1. Get a fd with BPF_ENABLE_STATS, and make sure it is valid;
2. Check program run_time_ns;
3. Sleep for the monitoring period;
4. Check program run_time_ns again, calculate the difference;
5. Close the fd.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200430071506.1408910-2-songliubraving@fb.com
|
|
Corrected two function names. Added a missing space.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add, and use in generic netlink, helpers to dump out a netlink
policy to userspace, including all the range validation data,
nested policies etc.
This lets userspace discover what the kernel understands.
For families/commands other than generic netlink, the helpers
need to be used directly in an appropriate command, or we can
add some infrastructure (a new netlink family) that those can
register their policies with for introspection. I'm not that
familiar with non-generic netlink, so that's left out for now.
The data exposed to userspace also includes min and max length
for binary/string data, I've done that instead of letting the
userspace tools figure out whether min/max is intended based
on the type so that we can extend this later in the kernel, we
might want to just use the range data for example.
Because of this, I opted to not directly expose the NLA_*
values, even if some of them are already exposed via BPF, as
with min/max length we don't need to have different types here
for NLA_BINARY/NLA_MIN_LEN/NLA_EXACT_LEN, we just make them
all NL_ATTR_TYPE_BINARY with min/max length optionally set.
Similarly, we don't really need NLA_MSECS, and perhaps can
remove it in the future - but not if we encode it into the
userspace API now. It gets mapped to NL_ATTR_TYPE_U64 here.
Note that the exposing here corresponds to the strict policy
interpretation, and NLA_UNSPEC items are omitted entirely.
To get those, change them to NLA_MIN_LEN which behaves in
exactly the same way, but is exposed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
A few resources-related fixes for qxl, some doc build warnings and ioctl
fixes for dma-buf, an off-by-one fix in edid, and a return code fix in
DP-MST
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200430153201.wx6of2b2gsoip7bk@gilmour.lan
|
|
- add SPDX header;
- add a document title;
- adjust titles and chapters, adding proper markups;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds ability to filter sockets based on cgroup v2 ID.
Such filter is helpful in ss utility for filtering sockets by
cgroup pathname.
Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds cgroup v2 ID to common inet diag message attributes.
Cgroup v2 ID is kernfs ID (ino or ino+gen). This attribute allows filter
inet diag output by cgroup ID obtained by name_to_handle_at() syscall.
When net_cls or net_prio cgroup is activated this ID is equal to 1 (root
cgroup ID) for newly created sockets.
Some notes about this ID:
1) gets initialized in socket() syscall
2) incoming socket gets ID from listening socket
(not during accept() syscall)
3) not changed when process get moved to another cgroup
4) can point to deleted cgroup (refcounting)
v2:
- use CONFIG_SOCK_CGROUP_DATA instead if CONFIG_CGROUPS
v3:
- fix attr size by using nla_total_size_64bit() (Eric Dumazet)
- more detailed commit message (Konstantin Khlebnikov)
Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Reviewed-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-By: Tejun Heo <tj@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To provide support for SEV-ES, the hypervisor must provide an area of
memory to the PSP. Once this Trusted Memory Region (TMR) is provided to
the PSP, the contents of this area of memory are no longer available to
the x86.
Update the PSP driver to allocate a 1MB region for the TMR that is 1MB
aligned and then provide it to the PSP through the SEV INIT command.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for nf-next:
1) Add IPS_HW_OFFLOAD status bit, from Bodong Wang.
2) Remove 128-bit limit on the set element data area, rise it
to 64 bytes.
3) Report EOPNOTSUPP for unsupported NAT types and flags.
4) Set up nft_nat flags from the control plane path.
5) Add helper functions to set up the nf_nat_range2 structure.
6) Add netmap support for nft_nat.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add ability to fetch bpf_link details through BPF_OBJ_GET_INFO_BY_FD command.
Also enhance show_fdinfo to potentially include bpf_link type-specific
information (similarly to obj_info).
Also introduce enum bpf_link_type stored in bpf_link itself and expose it in
UAPI. bpf_link_tracing also now will store and return bpf_attach_type.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429001614.1544-5-andriin@fb.com
|
|
Add support to look up bpf_link by ID and iterate over all existing bpf_links
in the system. GET_FD_BY_ID code handles not-yet-ready bpf_link by checking
that its ID hasn't been set to non-zero value yet. Setting bpf_link's ID is
done as the very last step in finalizing bpf_link, together with installing
FD. This approach allows users of bpf_link in kernel code to not worry about
races between user-space and kernel code that hasn't finished attaching and
initializing bpf_link.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429001614.1544-4-andriin@fb.com
|
|
Generate ID for each bpf_link using IDR, similarly to bpf_map and bpf_prog.
bpf_link creation, initialization, attachment, and exposing to user-space
through FD and ID is a complicated multi-step process, abstract it away
through bpf_link_primer and bpf_link_prime(), bpf_link_settle(), and
bpf_link_cleanup() internal API. They guarantee that until bpf_link is
properly attached, user-space won't be able to access partially-initialized
bpf_link either from FD or ID. All this allows to simplify bpf_link attachment
and error handling code.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429001614.1544-3-andriin@fb.com
|
|
Add a new kfd ioctl to allocate queue GWS. Queue
GWS is released on queue destroy.
v2: re-introduce this API with the following fixes squashed in:
- drm/amdkfd: fix null pointer dereference on dev
- drm/amdkfd: Return proper error code for gws alloc API
- drm/amdkfd: Remove GPU ID in GWS queue creation
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch allows you to NAT the network address prefix onto another
network address prefix, a.k.a. netmapping.
Userspace must specify the NF_NAT_RANGE_NETMAP flag and the prefix
address through the NFTA_NAT_REG_ADDR_MIN and NFTA_NAT_REG_ADDR_MAX
netlink attributes.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Log information about programs connecting to and disconnecting from the
audit netlink multicast socket. This is needed so that during
investigations a security officer can tell who or what had access to the
audit trail. This helps to meet the FAU_SAR.2 requirement for Common
Criteria.
Here is the systemd startup event:
type=PROCTITLE msg=audit(2020-04-22 10:10:21.787:10) : proctitle=/init
type=SYSCALL msg=audit(2020-04-22 10:10:21.787:10) : arch=x86_64 syscall=bind success=yes exit=0 a0=0x19 a1=0x555f4aac7e90 a2=0xc a3=0x7ffcb792ff44 items=0 ppid=0 pid=1 auid=unset uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=(none) ses=unset comm=systemd exe=/usr/lib/systemd/systemd subj=kernel key=(null)
type=UNKNOWN[1335] msg=audit(2020-04-22 10:10:21.787:10) : pid=1 uid=root auid=unset tty=(none) ses=unset subj=kernel comm=systemd exe=/usr/lib/systemd/systemd nl-mcgrp=1 op=connect res=yes
And events from the test suite that just uses close():
type=PROCTITLE msg=audit(2020-04-22 11:47:08.501:442) : proctitle=/usr/bin/perl -w amcast_joinpart/test
type=SYSCALL msg=audit(2020-04-22 11:47:08.501:442) : arch=x86_64 syscall=bind success=yes exit=0 a0=0x7 a1=0x563004378760 a2=0xc a3=0x0 items=0 ppid=815 pid=818 auid=root uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=ttyS0 ses=1 comm=perl exe=/usr/bin/perl subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 key=(null)
type=UNKNOWN[1335] msg=audit(2020-04-22 11:47:08.501:442) : pid=818 uid=root auid=root tty=ttyS0 ses=1 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 comm=perl exe=/usr/bin/perl nl-mcgrp=1 op=connect res=yes
type=UNKNOWN[1335] msg=audit(2020-04-22 11:47:08.501:443) : pid=818 uid=root auid=root tty=ttyS0 ses=1 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 comm=perl exe=/usr/bin/perl nl-mcgrp=1 op=disconnect res=yes
And the events from the test suite using setsockopt with NETLINK_DROP_MEMBERSHIP:
type=PROCTITLE msg=audit(2020-04-22 11:39:53.291:439) : proctitle=/usr/bin/perl -w amcast_joinpart/test
type=SYSCALL msg=audit(2020-04-22 11:39:53.291:439) : arch=x86_64 syscall=bind success=yes exit=0 a0=0x7 a1=0x5560877c2d20 a2=0xc a3=0x0 items=0 ppid=772 pid=775 auid=root uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=ttyS0 ses=1 comm=perl exe=/usr/bin/perl subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 key=(null)
type=UNKNOWN[1335] msg=audit(2020-04-22 11:39:53.291:439) : pid=775 uid=root auid=root tty=ttyS0 ses=1 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 comm=perl exe=/usr/bin/perl nl-mcgrp=1 op=connect res=yes
type=PROCTITLE msg=audit(2020-04-22 11:39:53.292:440) : proctitle=/usr/bin/perl -w amcast_joinpart/test
type=SYSCALL msg=audit(2020-04-22 11:39:53.292:440) : arch=x86_64 syscall=setsockopt success=yes exit=0 a0=0x7 a1=SOL_NETLINK a2=0x2 a3=0x7ffc8366f000 items=0 ppid=772 pid=775 auid=root uid=root gid=root euid=root suid=root fsuid=root egid=root sgid=root fsgid=root tty=ttyS0 ses=1 comm=perl exe=/usr/bin/perl subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 key=(null)
type=UNKNOWN[1335] msg=audit(2020-04-22 11:39:53.292:440) : pid=775 uid=root auid=root tty=ttyS0 ses=1 subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 comm=perl exe=/usr/bin/perl nl-mcgrp=1 op=disconnect res=yes
Please see the upstream issue tracker at
https://github.com/linux-audit/audit-kernel/issues/28
With the feature description at
https://github.com/linux-audit/audit-kernel/wiki/RFE-Audit-Multicast-Socket-Join-Part
The testsuite support is at
https://github.com/rgbriggs/audit-testsuite/compare/ghak28-mcast-part-join
https://github.com/linux-audit/audit-testsuite/pull/93
And the userspace support patch is at
https://github.com/linux-audit/audit-userspace/pull/114
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V fixes from Wei Liu:
- Two patches from Dexuan fixing suspension bugs
- Three cleanup patches from Andy and Michael
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hyper-v: Remove internal types from UAPI header
hyper-v: Use UUID API for exporting the GUID
x86/hyperv: Suspend/resume the VP assist page for hibernation
Drivers: hv: Move AEOI determination to architecture dependent code
Drivers: hv: vmbus: Fix Suspend-to-Idle for Generation-2 VM
|
|
This patch adds a new port attribute, IFLA_BRPORT_MRP_RING_OPEN, which allows
to notify the userspace when the port lost the continuite of MRP frames.
This attribute is set by kernel whenever the SW or HW detects that the ring is
being open or closed.
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new nested netlink attribute to configure the MRP. These attributes are used
by the userspace to add/delete/configure MRP instances and by the kernel to
notify the userspace when the MRP ring gets open/closed. MRP nested attribute
has the following attributes:
IFLA_BRIDGE_MRP_INSTANCE - the parameter type is br_mrp_instance which contains
the instance id, and the ifindex of the two ports. The ports can't be part of
multiple instances. This is used to create/delete MRP instances.
IFLA_BRIDGE_MRP_PORT_STATE - the parameter type is u32. Which can be forwarding,
blocking or disabled.
IFLA_BRIDGE_MRP_PORT_ROLE - the parameter type is br_mrp_port_role which
contains the instance id and the role. The role can be primary or secondary.
IFLA_BRIDGE_MRP_RING_STATE - the parameter type is br_mrp_ring_state which
contains the instance id and the state. The state can be open or closed.
IFLA_BRIDGE_MRP_RING_ROLE - the parameter type is br_mrp_ring_role which
contains the instance id and the ring role. The role can be MRM or MRC.
IFLA_BRIDGE_MRP_START_TEST - the parameter type is br_mrp_start_test which
contains the instance id, the interval at which to send the MRP_Test frames,
how many test frames can be missed before declaring the ring open and the
period which represent for how long to send the test frames.
Also add the file include/uapi/linux/mrp_bridge.h which defines all the types
used by MRP that are also needed by the userpace.
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The uapi is the same on 32 and 64 bit, but the number isn't. Everyone
who botched this please re-read:
https://www.kernel.org/doc/html/v5.4-preprc-cpu/ioctl/botching-up-ioctls.html
Also, the type argument for the ioctl macros is for the type the void
__user *arg pointer points at, which in this case would be the
variable-sized char[] of a 0 terminated string. So this was botched in
more than just the usual ways.
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Chenbo Feng <fengc@google.com>
Cc: Greg Hackmann <ghackmann@google.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Cc: minchan@kernel.org
Cc: surenb@google.com
Cc: jenhaochen@google.com
Cc: Martin Liu <liumartin@google.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Tested-by: Martin Liu <liumartin@google.com>
Reviewed-by: Martin Liu <liumartin@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
[sumits: updated some checkpatch fixes, corrected author email]
Link: https://patchwork.freedesktop.org/patch/msgid/20200407133002.3486387-1-daniel.vetter@ffwll.ch
|
|
This bit indicates that the conntrack entry is offloaded to hardware
flow table. nf_conntrack entry will be tagged with [HW_OFFLOAD] if
it's offload to hardware.
cat /proc/net/nf_conntrack
ipv4 2 tcp 6 \
src=1.1.1.17 dst=1.1.1.16 sport=56394 dport=5001 \
src=1.1.1.16 dst=1.1.1.17 sport=5001 dport=56394 [HW_OFFLOAD] \
mark=0 zone=0 use=3
Note that HW_OFFLOAD/OFFLOAD/ASSURED are mutually exclusive.
Changelog:
* V1->V2:
- Remove check of lastused from stats. It was meant for cases such
as removing driver module while traffic still running. Better to
handle such cases from garbage collector.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
On a device like a cellphone which is constantly suspending
and resuming CLOCK_MONOTONIC is not particularly useful for
keeping track of or reacting to external network events.
Instead you want to use CLOCK_BOOTTIME.
Hence add bpf_ktime_get_boot_ns() as a mirror of bpf_ktime_get_ns()
based around CLOCK_BOOTTIME instead of CLOCK_MONOTONIC.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Simple overlapping changes to linux/vermagic.h
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Fix memory leak in netfilter flowtable, from Roi Dayan.
2) Ref-count leaks in netrom and tipc, from Xiyu Yang.
3) Fix warning when mptcp socket is never accepted before close, from
Florian Westphal.
4) Missed locking in ovs_ct_exit(), from Tonghao Zhang.
5) Fix large delays during PTP synchornization in cxgb4, from Rahul
Lakkireddy.
6) team_mode_get() can hang, from Taehee Yoo.
7) Need to use kvzalloc() when allocating fw tracer in mlx5 driver,
from Niklas Schnelle.
8) Fix handling of bpf XADD on BTF memory, from Jann Horn.
9) Fix BPF_STX/BPF_B encoding in x86 bpf jit, from Luke Nelson.
10) Missing queue memory release in iwlwifi pcie code, from Johannes
Berg.
11) Fix NULL deref in macvlan device event, from Taehee Yoo.
12) Initialize lan87xx phy correctly, from Yuiko Oshino.
13) Fix looping between VRF and XFRM lookups, from David Ahern.
14) etf packet scheduler assumes all sockets are full sockets, which is
not necessarily true. From Eric Dumazet.
15) Fix mptcp data_fin handling in RX path, from Paolo Abeni.
16) fib_select_default() needs to handle nexthop objects, from David
Ahern.
17) Use GFP_ATOMIC under spinlock in mac80211_hwsim, from Wei Yongjun.
18) vxlan and geneve use wrong nlattr array, from Sabrina Dubroca.
19) Correct rx/tx stats in bcmgenet driver, from Doug Berger.
20) BPF_LDX zero-extension is encoded improperly in x86_32 bpf jit, fix
from Luke Nelson.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (100 commits)
selftests/bpf: Fix a couple of broken test_btf cases
tools/runqslower: Ensure own vmlinux.h is picked up first
bpf: Make bpf_link_fops static
bpftool: Respect the -d option in struct_ops cmd
selftests/bpf: Add test for freplace program with expected_attach_type
bpf: Propagate expected_attach_type when verifying freplace programs
bpf: Fix leak in LINK_UPDATE and enforce empty old_prog_fd
bpf, x86_32: Fix logic error in BPF_LDX zero-extension
bpf, x86_32: Fix clobbering of dst for BPF_JSET
bpf, x86_32: Fix incorrect encoding in BPF_LDX zero-extension
bpf: Fix reStructuredText markup
net: systemport: suppress warnings on failed Rx SKB allocations
net: bcmgenet: suppress warnings on failed Rx SKB allocations
macsec: avoid to set wrong mtu
mac80211: sta_info: Add lockdep condition for RCU list usage
mac80211: populate debugfs only after cfg80211 init
net: bcmgenet: correct per TX/RX ring statistics
net: meth: remove spurious copyright text
net: phy: bcm84881: clear settings on link down
chcr: Fix CPU hard lockup
...
|
|
The patch fixes:
$ scripts/bpf_helpers_doc.py > bpf-helpers.rst
$ rst2man bpf-helpers.rst > bpf-helpers.7
bpf-helpers.rst:1105: (WARNING/2) Inline strong start-string without end-string.
Signed-off-by: Jakub Wilk <jwilk@jwilk.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200422082324.2030-1-jwilk@jwilk.net
|
|
KVM_CAP_HALT_POLL is a per-VM capability that lets userspace
control the halt-polling time, allowing halt-polling to be tuned or
disabled on particular VMs.
With dynamic halt-polling, a VM's VCPUs can poll from anywhere from
[0, halt_poll_ns] on each halt. KVM_CAP_HALT_POLL sets the
upper limit on the poll time.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Jon Cargille <jcargill@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200417221446.108733-1-jcargill@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The current NL80211_EXT_FEATURE_BEACON_PROTECTION feature flag
requires both AP and client support, add a new one called
NL80211_EXT_FEATURE_BEACON_PROTECTION_CLIENT that enables only
support in client (and P2P-client) modes.
Link: https://lore.kernel.org/r/20200420140559.6ba704053a5a.Ifeb869fb0b48e52fe0cb9c15572b93ac8a924f8d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For DPP, there's a need to receive multicast action frames,
but many drivers need a special filter configuration for this.
Support announcing from userspace in the management registration
that multicast RX is required, with an extended feature flag if
the driver handles this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20200417124013.c46238801048.Ib041d437ce0bff28a0c6d5dc915f68f1d8591002@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Extend cfg80211_rx_unprot_mlme_mgmt() to cover indication of unprotected
Beacon frames in addition to the previously used Deauthentication and
Disassociation frames. The Beacon frame case is quite similar, but has
couple of exceptions: this is used both with fully unprotected and also
incorrectly protected frames and there is a rate limit on the events to
avoid unnecessary flooding netlink events in case something goes wrong.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20200401142548.6990-1-jouni@codeaurora.org
[add missing kernel-doc]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The uuid_le mistakenly comes to be an UAPI type. Since it's luckily not used by
Hyper-V APIs, we may replace with POD types, i.e. __u8 array.
Note, previously shared uuid_be had been removed from UAPI few releases ago.
This is a continuation of that process towards removing uuid_le one.
Note, there is no ABI change!
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200422131818.23088-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core fixes and improvements from Arnaldo Carvalho de Melo:
kernel + tools/perf:
Alexey Budankov:
- Introduce CAP_PERFMON to kernel and user space.
callchains:
Adrian Hunter:
- Allow using Intel PT to synthesize callchains for regular events.
Kan Liang:
- Stitch LBR records from multiple samples to get deeper backtraces,
there are caveats, see the csets for details.
perf script:
Andreas Gerstmayr:
- Add flamegraph.py script
BPF:
Jiri Olsa:
- Synthesize bpf_trampoline/dispatcher ksymbol events.
perf stat:
Arnaldo Carvalho de Melo:
- Honour --timeout for forked workloads.
Stephane Eranian:
- Force error in fallback on :k events, to avoid counting nothing when
the user asks for kernel events but is not allowed to.
perf bench:
Ian Rogers:
- Add event synthesis benchmark.
tools api fs:
Stephane Eranian:
- Make xxx__mountpoint() more scalable
libtraceevent:
He Zhe:
- Handle return value of asprintf.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Pull virtio fixes and cleanups from Michael Tsirkin:
- Some bug fixes
- Cleanup a couple of issues that surfaced meanwhile
- Disable vhost on ARM with OABI for now - to be fixed fully later in
the cycle or in the next release.
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (24 commits)
vhost: disable for OABI
virtio: drop vringh.h dependency
virtio_blk: add a missing include
virtio-balloon: Avoid using the word 'report' when referring to free page hinting
virtio-balloon: make virtballoon_free_page_report() static
vdpa: fix comment of vdpa_register_device()
vdpa: make vhost, virtio depend on menu
vdpa: allow a 32 bit vq alignment
drm/virtio: fix up for include file changes
remoteproc: pull in slab.h
rpmsg: pull in slab.h
virtio_input: pull in slab.h
remoteproc: pull in slab.h
virtio-rng: pull in slab.h
virtgpu: pull in uaccess.h
tools/virtio: make asm/barrier.h self contained
tools/virtio: define aligned attribute
virtio/test: fix up after IOTLB changes
vhost: Create accessors for virtqueues private_data
vdpasim: Return status in vdpasim_get_status
...
|
|
Add H264 profile "Contrained High" and H264 levels "5.2",
"6.0", "6.1" and "6.2".
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This warning:
./include/uapi/linux/firewire-cdev.h:312: WARNING: Inline literal start-string without end-string.
is because %FOO doesn't work if there's a parenthesis at the
string (as a parenthesis may indicate a function). So, mark
the literal block using the alternate ``FOO`` syntax.
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/9b2501a41eba27ccdd4603cac2353c0efba7a90a.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Some broken references happened due to shifting files around
and ReST renames. Those can't be auto-fixed by the script,
so let's fix them manually.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Link: https://lore.kernel.org/r/64773a12b4410aaf3e3be89e3ec7e34de2484eea.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Several references got broken due to txt to ReST conversion.
Several of them can be automatically fixed with:
scripts/documentation-file-ref-check --fix
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # hwtracing/coresight/Kconfig
Reviewed-by: Paul E. McKenney <paulmck@kernel.org> # memory-barrier.txt
Acked-by: Alex Shi <alex.shi@linux.alibaba.com> # translations/zh_CN
Acked-by: Federico Vaga <federico.vaga@vaga.pv.it> # translations/it_IT
Acked-by: Marc Zyngier <maz@kernel.org> # kvm/arm64
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/6f919ddb83a33b5f2a63b6b5f0575737bb2b36aa.1586881715.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
RFC 2863 defines the operational state testing. Add support for this
state, both as a IF_LINK_MODE_ and __LINK_STATE_.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are use-cases where user-space shouldn't be allowed to communicate
directly with a TEE device which is dedicated to provide a specific
service for a kernel client. So add a private login method for kernel
clients and disallow user-space to open-session using GP implementation
defined login method range: (0x80000000 - 0xBFFFFFFF).
Reviewed-by: Jerome Forissier <jerome@forissier.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
s/xfrm_state_offload/xfrm_user_offload/
Fixes: d77e38e612a ("xfrm: Add an IPsec hardware offloading API")
Signed-off-by: Antony Antony <antony@phenome.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull flexible-array member conversion from Gustavo Silva:
"The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array
member[1][2], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof
operator may not be applied. As a quirk of the original
implementation of zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible
array members have incomplete type[1]. There are some instances of
code in which the sizeof operator is being incorrectly/erroneously
applied to zero-length arrays and the result is zero. Such instances
may be hiding some bugs. So, this work (flexible-array member
convertions) will also help to get completely rid of those sorts of
issues.
Notice that all of these patches have been baking in linux-next for
quite a while now and, 238 more of these patches have already been
merged into 5.7-rc1.
There are a couple hundred more of these issues waiting to be
addressed in the whole codebase"
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
* tag 'flexible-array-member-5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux: (28 commits)
xattr.h: Replace zero-length array with flexible-array member
uapi: linux: fiemap.h: Replace zero-length array with flexible-array member
uapi: linux: dlm_device.h: Replace zero-length array with flexible-array member
tpm_eventlog.h: Replace zero-length array with flexible-array member
ti_wilink_st.h: Replace zero-length array with flexible-array member
swap.h: Replace zero-length array with flexible-array member
skbuff.h: Replace zero-length array with flexible-array member
sched: topology.h: Replace zero-length array with flexible-array member
rslib.h: Replace zero-length array with flexible-array member
rio.h: Replace zero-length array with flexible-array member
posix_acl.h: Replace zero-length array with flexible-array member
platform_data: wilco-ec.h: Replace zero-length array with flexible-array member
memcontrol.h: Replace zero-length array with flexible-array member
list_lru.h: Replace zero-length array with flexible-array member
lib: cpu_rmap: Replace zero-length array with flexible-array member
irq.h: Replace zero-length array with flexible-array member
ihex.h: Replace zero-length array with flexible-array member
igmp.h: Replace zero-length array with flexible-array member
genalloc.h: Replace zero-length array with flexible-array member
ethtool.h: Replace zero-length array with flexible-array member
...
|
|
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
|
|
hinting
It can be confusing to have multiple features within the same driver that
are using the same verbage. As such this patch is creating a union of
free_page_report_cmd_id with free_page_hint_cmd_id so that we can clean-up
the userspace code a bit in terms of readability while maintaining the
functionality of legacy code.
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Link: https://lore.kernel.org/r/20200415174318.13597.99753.stgit@localhost.localdomain
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Pull networking fixes from David Miller:
1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel.
2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet.
3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing.
4) Adjust icmp6 message source address selection when routes have a
preferred source address set, from Tim Stallard.
5) Be sure to validate HSR protocol version when creating new links,
from Taehee Yoo.
6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in
non-initial namespaces, from Michael Weiß.
7) Missing release firmware call in mlx5, from Eran Ben Elisha.
8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from
Taehee Yoo.
9) Fix pause frame negotiation in marvell phy driver, from Clemens
Gruber.
10) Record RX queue early enough in tun packet paths such that XDP
programs will see the correct RX queue index, from Gilberto Bertin.
11) Fix double unlock in mptcp, from Florian Westphal.
12) Fix offset overflow in ARM bpf JIT, from Luke Nelson.
13) marvell10g needs to soft reset PHY when coming out of low power
mode, from Russell King.
14) Fix MTU setting regression in stmmac for some chip types, from
Florian Fainelli.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
amd-xgbe: Use __napi_schedule() in BH context
mISDN: make dmril and dmrim static
net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes
net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode
tipc: fix incorrect increasing of link window
Documentation: Fix tcp_challenge_ack_limit default value
net: tulip: make early_486_chipsets static
dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400
ipv6: remove redundant assignment to variable err
net/rds: Use ERR_PTR for rds_message_alloc_sgs()
net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge
selftests/bpf: Check for correct program attach/detach in xdp_attach test
libbpf: Fix type of old_fd in bpf_xdp_set_link_opts
libbpf: Always specify expected_attach_type on program load if supported
xsk: Add missing check on user supplied headroom size
mac80211: fix channel switch trigger from unknown mesh peer
mac80211: fix race in ieee80211_register_hw()
net: marvell10g: soft-reset the PHY when coming out of low power
net: marvell10g: report firmware version
net/cxgb4: Check the return from t4_query_params properly
...
|
|
Introduce the CAP_PERFMON capability designed to secure system
performance monitoring and observability operations so that CAP_PERFMON
can assist CAP_SYS_ADMIN capability in its governing role for
performance monitoring and observability subsystems.
CAP_PERFMON hardens system security and integrity during performance
monitoring and observability operations by decreasing attack surface that
is available to a CAP_SYS_ADMIN privileged process [2]. Providing the access
to system performance monitoring and observability operations under CAP_PERFMON
capability singly, without the rest of CAP_SYS_ADMIN credentials, excludes
chances to misuse the credentials and makes the operation more secure.
Thus, CAP_PERFMON implements the principle of least privilege for
performance monitoring and observability operations (POSIX IEEE 1003.1e:
2.2.2.39 principle of least privilege: A security design principle that
states that a process or program be granted only those privileges
(e.g., capabilities) necessary to accomplish its legitimate function,
and only for the time that such privileges are actually required)
CAP_PERFMON meets the demand to secure system performance monitoring and
observability operations for adoption in security sensitive, restricted,
multiuser production environments (e.g. HPC clusters, cloud and virtual compute
environments), where root or CAP_SYS_ADMIN credentials are not available to
mass users of a system, and securely unblocks applicability and scalability
of system performance monitoring and observability operations beyond root
and CAP_SYS_ADMIN use cases.
CAP_PERFMON takes over CAP_SYS_ADMIN credentials related to system performance
monitoring and observability operations and balances amount of CAP_SYS_ADMIN
credentials following the recommendations in the capabilities man page [1]
for CAP_SYS_ADMIN: "Note: this capability is overloaded; see Notes to kernel
developers, below." For backward compatibility reasons access to system
performance monitoring and observability subsystems of the kernel remains
open for CAP_SYS_ADMIN privileged processes but CAP_SYS_ADMIN capability
usage for secure system performance monitoring and observability operations
is discouraged with respect to the designed CAP_PERFMON capability.
Although the software running under CAP_PERFMON can not ensure avoidance
of related hardware issues, the software can still mitigate these issues
following the official hardware issues mitigation procedure [2]. The bugs
in the software itself can be fixed following the standard kernel development
process [3] to maintain and harden security of system performance monitoring
and observability operations.
[1] http://man7.org/linux/man-pages/man7/capabilities.7.html
[2] https://www.kernel.org/doc/html/latest/process/embargoed-hardware-issues.html
[3] https://www.kernel.org/doc/html/latest/admin-guide/security-bugs.html
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Acked-by: Serge E. Hallyn <serge@hallyn.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Igor Lubashev <ilubashe@akamai.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-doc@vger.kernel.org
Cc: linux-man@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: selinux@vger.kernel.org
Link: http://lore.kernel.org/lkml/5590d543-82c6-490a-6544-08e6a5517db0@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"We have a few regressions and one fix for stable:
- revert fsync optimization
- fix lost i_size update
- fix a space accounting leak
- build fix, add back definition of a deprecated ioctl flag
- fix search condition for old roots in relocation"
* tag 'for-5.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: re-instantiate the removed BTRFS_SUBVOL_CREATE_ASYNC definition
btrfs: fix reclaim counter leak of space_info objects
btrfs: make full fsyncs always operate on the entire file again
btrfs: fix lost i_size update after cloning inline extent
btrfs: check commit root generation in should_ignore_root
|
|
The commit 9c1036fdb1d1ff1b ("btrfs: Remove BTRFS_SUBVOL_CREATE_ASYNC
support") breaks strace build with the kernel headers from git:
btrfs.c: In function "btrfs_test_subvol_ioctls":
btrfs.c:531:23: error: "BTRFS_SUBVOL_CREATE_ASYNC" undeclared (first use
in this function)
vol_args_v2.flags = BTRFS_SUBVOL_CREATE_ASYNC;
Moreover, it is improper to break UAPI, strace uses the definitions to
decode ioctls that are considered part of public API.
Restore the macro definition and put it under "#ifndef __KERNEL__"
in order to prevent inadvertent in-kernel usage.
Fixes: 9c1036fdb1d1ff1b ("btrfs: Remove BTRFS_SUBVOL_CREATE_ASYNC support")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Eugene Syromiatnikov <esyr@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
