| Age | Commit message (Collapse) | Author |
|---|
|
Add control commands for registering and unregistering shared memory
buffers for zero-copy I/O:
- UBLK_U_CMD_REG_BUF (0x18): pins pages from userspace, inserts PFN
ranges into a per-device maple tree for O(log n) lookup during I/O.
Buffer pointers are tracked in a per-device xarray. Returns the
assigned buffer index.
- UBLK_U_CMD_UNREG_BUF (0x19): removes PFN entries and unpins pages.
Queue freeze/unfreeze is handled internally so userspace need not
quiesce the device during registration.
Also adds:
- UBLK_IO_F_SHMEM_ZC flag and addr encoding helpers in UAPI header
(16-bit buffer index supporting up to 65536 buffers)
- Data structures (ublk_buf, ublk_buf_range) and xarray/maple tree
- __ublk_ctrl_reg_buf() helper for PFN insertion with error unwinding
- __ublk_ctrl_unreg_buf() helper for cleanup reuse
- ublk_support_shmem_zc() / ublk_dev_support_shmem_zc() stubs
(returning false — feature not enabled yet)
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://patch.msgid.link/20260331153207.3635125-2-ming.lei@redhat.com
[axboe: fixup ublk_buf_reg -> ublk_shmem_buf_reg errors, comments]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We need the USB fixes in here to build on and for testing
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Per Linus' comments requesting the replacement of "INDIR_BR_LP" in the
indirect branch tracking prctl()s with something more readable, and
suggesting the use of the speculation control prctl()s as an exemplar,
reimplement the prctl()s and related constants that control per-task
forward-edge control flow integrity.
This primarily involves two changes. First, the prctls are
restructured to resemble the style of the speculative execution
workaround control prctls PR_{GET,SET}_SPECULATION_CTRL, to make them
easier to extend in the future. Second, the "indir_br_lp" abbrevation
is expanded to "branch_landing_pads" to be less telegraphic. The
kselftest and documentation is adjusted accordingly.
Link: https://lore.kernel.org/linux-riscv/CAHk-=whhSLGZAx3N5jJpb4GLFDqH_QvS07D+6BnkPWmCEzTAgw@mail.gmail.com/
Cc: Deepak Gupta <debug@rivosinc.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
Add DPLL_A_FREQUENCY_MONITOR device attribute to allow control over
the frequency monitor feature. The attribute uses the existing
dpll_feature_state enum (enable/disable) and is present in both
device-get reply and device-set request.
Add DPLL_A_PIN_MEASURED_FREQUENCY pin attribute to expose the measured
input frequency in millihertz (mHz). The attribute is present in the
pin-get reply. Add DPLL_PIN_MEASURED_FREQUENCY_DIVIDER constant to
allow userspace to extract integer and fractional parts.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260402184057.1890514-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
Minor conflict in kernel/bpf/verifier.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Now that all the bits are properly addressed, provide a mechanism
for testing ESA mode guests in nested configurations.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
[farman@us.ibm.com: Updated commit message]
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
|
|
The following fix in sched/urgent:
e08d007f9d81 ("sched/debug: Fix avg_vruntime() usage")
is in conflict with this pending commit in sched/core:
4823725d9d1d ("sched/fair: Increase weight bits for avg_vruntime")
Both modify the same variable definition and initialization blocks,
resolve it by merging the two.
Conflicts:
kernel/sched/debug.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Allow creating a zcrx instance without attaching it to a net device.
All data will be copied through the fallback path. The user is also
expected to use ZCRX_CTRL_FLUSH_RQ to handle overflows as it normally
should even with a netdev, but it becomes even more relevant as there
will likely be no one to automatically pick up buffers.
Apart from that, it follows the zcrx uapi for the I/O path, and is
useful for testing, experimentation, and potentially for the copy
receive path in the future if improved.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/674f8ad679c5a0bc79d538352b3042cf0999596e.1774261953.git.asml.silence@gmail.com
[axboe: fix spelling error in uapi header and commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Clarify bpf_ringbuf_discard() documentation for BPF_RB_NO_WAKEUP.
Discarded ring buffer records are still left in the ring buffer and are
only skipped when user space consumes them. This can matter when
BPF_RB_NO_WAKEUP is used: a later submit relying on adaptive wakeup
might not wake the consumer, because the discarded record still needs to
be consumed first.
Scenario:
epoll_wait(rb_fd); // blocks
rec = bpf_ringbuf_reserve(&rb, ...);
bpf_ringbuf_discard(rec, BPF_RB_NO_WAKEUP);
rec = bpf_ringbuf_reserve(&rb, ...);
bpf_ringbuf_submit(rec, 0); // valid record, but no wakeup
Document this in bpf_ringbuf_discard() to make the interaction between
discarded records, user-space consumption, and adaptive wakeups explicit.
Reported-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260331130612.3762433-1-eyal.birger@gmail.com
----
v2: adapt wording per feedback from Andrii.
|
|
The TCG Opal device could enter a state where no new session can be
created, blocking even Discovery or PSID reset. While a power cycle
or waiting for the timeout should work, there is another possibility
for recovery: using the Stack Reset command.
The Stack Reset command is defined in the TCG Storage Architecture Core
Specification and is mandatory for all Opal devices (see Section 3.3.6
of the Opal SSC specification).
This patch implements the Stack Reset command. Sending it should clear
all active sessions immediately, allowing subsequent commands to run
successfully. While it is a TCG transport layer command, the Linux
kernel implements only Opal ioctls, so it makes sense to use the
IOC_OPAL ioctl interface.
The Stack Reset takes no arguments; the response can be success or pending.
If the command reports a pending state, userspace can try to repeat it;
in this case, the code returns -EBUSY.
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Reviewed-by: Ondrej Kozina <okozina@redhat.com>
Link: https://patch.msgid.link/20260310095349.411287-1-gmazyland@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Linux 7.0-rc6
Requested by a few people on irc to resolve conflicts in other tress.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Introduce a new VM type for KVM/arm64 to allow userspace to request the
creation of a "protected VM" when the host has booted with pKVM enabled.
For now, this feature results in a taint on first use as many aspects of
a protected VM are not yet protected!
Tested-by: Fuad Tabba <tabba@google.com>
Tested-by: Mostafa Saleh <smostafa@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20260330144841.26181-32-will@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
The spec for Embedded USB2 Version 2.0 adds a new feature
request. This needs to be added to uapi for monitoring.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260319144715.2957358-2-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This adds the USB authentication extensions to the
uapi chapter 9 declarations, so that user space tools
correctly operate on the descriptor and commands.
This is necessary for sniffing and debugging in gadget
mode to correctly work, even though the kernel
does not use these requests in host mode.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260319144715.2957358-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In order to signal that filehandles on this export should be signed, add a
"sign_fh" export option. Filehandle signing can help the server defend
against certain filehandle guessing attacks.
Setting the "sign_fh" export option sets NFSEXP_SIGN_FH. In a future patch
NFSD uses this signal to append a MAC onto filehandles for that export.
While we're in here, tidy a few stray expflags to more closely align to the
export flag order.
Link: https://lore.kernel.org/linux-nfs/cover.1772022373.git.bcodding@hammerspace.com
Signed-off-by: Benjamin Coddington <bcodding@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
A future patch will enable NFSD to sign filehandles by appending a Message
Authentication Code(MAC). To do this, NFSD requires a secret 128-bit key
that can persist across reboots. A persisted key allows the server to
accept filehandles after a restart. Enable NFSD to be configured with this
key via the netlink interface.
Link: https://lore.kernel.org/linux-nfs/cover.1772022373.git.bcodding@hammerspace.com
Signed-off-by: Benjamin Coddington <bcodding@hammerspace.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
HUTRR119 introduces new usages for keys intended to invoke AI agents
based on the current context. These are useful with the increasing
number of operating systems with integrated Large Language Models
Add new key definitions for KEY_ACTION_ON_SELECTION,
KEY_CONTEXTUAL_INSERT and KEY_CONTEXTUAL_QUERY
Signed-off-by: Akshai Murari <akshaim@google.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
|
|
Add SEG6_IPTUNNEL_SRC in the uapi for users to configure a specific
tunnel source address. Make seg6_iptunnel handle the new attribute
correctly. It has priority over the configured per-netns tunnel
source address, if any.
Cc: David Ahern <dsahern@kernel.org>
Signed-off-by: Justin Iurman <justin.iurman@6wind.com>
Reviewed-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20260324091434.359341-2-justin.iurman@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
A fairly big set of changes all over, notably with:
- cfg80211: new APIs for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
- mt76:
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- iwlwifi: UNII-9 and continuing UHR work
* tag 'wireless-next-2026-03-26' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (230 commits)
wifi: mac80211: ignore reserved bits in reconfiguration status
wifi: cfg80211: allow protected action frame TX for NAN
wifi: ieee80211: Add some missing NAN definitions
wifi: nl80211: Add a notification to notify NAN channel evacuation
wifi: nl80211: add NL80211_CMD_NAN_ULW_UPDATE notification
wifi: nl80211: allow reporting spurious NAN Data frames
wifi: cfg80211: allow ToDS=0/FromDS=0 data frames on NAN data interfaces
wifi: nl80211: define an API for configuring the NAN peer's schedule
wifi: nl80211: add support for NAN stations
wifi: cfg80211: separately store HT, VHT and HE capabilities for NAN
wifi: cfg80211: add support for NAN data interface
wifi: cfg80211: make sure NAN chandefs are valid
wifi: cfg80211: Add an API to configure local NAN schedule
wifi: mac80211: cleanup error path of ieee80211_do_open
wifi: mac80211: extract channel logic from link logic
wifi: iwlwifi: mld: set RX_FLAG_RADIOTAP_TLV_AT_END generically
wifi: iwlwifi: reduce the number of prints upon firmware crash
wifi: iwlwifi: fix the description of SESSION_PROTECTION_CMD
wifi: iwlwifi: mld: introduce iwl_mld_vif_fw_id_valid
wifi: iwlwifi: mld: block EMLSR during TDLS connections
...
====================
Link: https://patch.msgid.link/20260326152021.305959-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
BTF kind layouts provide information to parse BTF kinds. By separating
parsing BTF from using all the information it provides, we allow BTF
to encode new features even if they cannot be used by readers. This
will be helpful in particular for cases where older tools are used
to parse newer BTF with kinds the older tools do not recognize;
the BTF can still be parsed in such cases using kind layout.
The intent is to support encoding of kind layouts optionally so that
tools like pahole can add this information. For each kind, we record
- length of singular element following struct btf_type
- length of each of the btf_vlen() elements following
- a (currently unused) flags field
The ideas here were discussed at [1], [2]; hence
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260326145444.2076244-2-alan.maguire@oracle.com
[1] https://lore.kernel.org/bpf/CAEf4BzYjWHRdNNw4B=eOXOs_ONrDwrgX4bn=Nuc1g8JPFC34MA@mail.gmail.com/
[2] https://lore.kernel.org/bpf/20230531201936.1992188-1-alan.maguire@oracle.com/
|
|
Cross-merge networking fixes after downstream PR (net-7.0-rc6).
No conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace manual range and mask validations with netlink policy
annotations in ctnetlink code paths, so that the netlink core rejects
invalid values early and can generate extack errors.
- CTA_PROTOINFO_TCP_STATE: reject values > TCP_CONNTRACK_SYN_SENT2 at
policy level, removing the manual >= TCP_CONNTRACK_MAX check.
- CTA_PROTOINFO_TCP_WSCALE_ORIGINAL/REPLY: reject values > TCP_MAX_WSCALE
(14). The normal TCP option parsing path already clamps to this value,
but the ctnetlink path accepted 0-255, causing undefined behavior when
used as a u32 shift count.
- CTA_FILTER_ORIG_FLAGS/REPLY_FLAGS: use NLA_POLICY_MASK with
CTA_FILTER_F_ALL, removing the manual mask checks.
- CTA_EXPECT_FLAGS: use NLA_POLICY_MASK with NF_CT_EXPECT_MASK, adding
a new mask define grouping all valid expect flags.
Extracted from a broader nf-next patch by Florian Westphal, scoped to
ctnetlink for the fixes tree.
Fixes: c8e2078cfe41 ("[NETFILTER]: ctnetlink: add support for internal tcp connection tracking flags handling")
Signed-off-by: David Carlier <devnexen@gmail.com>
Co-developed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Linux 7.0-rc4
Needed for rust tree.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
If all available channel resources are used for NAN channels, and one of
them is shared with another interface, and that interface needs to move
to a different channel (for example STA interface that needs to do a
channel or a link switch), then the driver can evacuate one of the NAN
channels (i.e. detach it from its channel resource and announce to the
peers that this channel is ULWed). In that case, the driver needs to
notify user space about the channel evacuation, so the user space can
adjust the local schedule accordingly.
Add a notification to let userspace know about it.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.d5bebfd5ff73.Iaaf5ef17e1ab7a38c19d60558e68fcf517e2b400@changeid
Link: https://patch.msgid.link/20260318123926.206536-11-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a new notification command that allows drivers to notify user space
when the device's ULW (Unaligned Schedule) blob has been updated. This
enables user space to attach the updated ULW blob to frames sent to NAN
peers.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.32b715af4ebb.Ibdb6e33941afd94abf77245245f87e4338d729d3@changeid
Link: https://patch.msgid.link/20260318123926.206536-10-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently we have this ability for AP and GO. But it is now needed also for
NAN_DATA mode - as per Wi-Fi Aware (TM) 4.0 specification 6.2.5:
"If a NAN Device receives a unicast NAN Data frame destined for it, but
with A1 address and A2 address that are not assigned to the NDP, it shall
discard the frame, and should send a Data Path Termination NAF to the
frame transmitter"
To allow this, change NL80211_CMD_UNEXPECTED_FRAME to support also
NAN_DATA, so drivers can report such cases and the user space can act
accordingly.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260108102921.5cf9f1351655.I47c98ce37843730b8b9eb8bd8e9ef62ed6c17613@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219094725.3846371-6-miriam.rachel.korenblit@intel.com
Link: https://patch.msgid.link/20260318123926.206536-9-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add an NL80211 command to configure the NAN schedule of a NAN peer.
Such a schedule contains a list of NAN channels, and a mapping from each
time slots to the corresponding channel (or unscheduled).
Also contains more information about the schedule, such as sequence ID
and map ID.
Not all of the restrictions are validated in this patch. In particular,
comparison of two maps of the same peer requires storing/retrieving each
map of each peer, only for validation.
Therefore, it is the responsibilty of the driver to check that.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.5b13fa5af4f6.If0e214ff5b52c9666e985fefa3f7be0ad14d93fb@changeid
Link: https://patch.msgid.link/20260318123926.206536-7-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There are 2 types of logical links with a NAN peer:
- management (NMI), which is used for Tx/Rx of NAN management frames.
- data (NDI), which is used for Tx/Rx of data frames, or non-NAN
management frames.
The NMI station has two roles:
- representation of the NAN peer - for example, the peer's schedule
and the HT, VHT, HE capabilities - belong to the NMI station, and not to
the NDI ones.
- Tx/Rx of NAN management frames to/from the peer.
The NDI station is used for Tx/Rx data frames of a specific NDP that was
established with the NAN peer.
Note that a peer can choose to reuse its NMI address as the NDI address.
In that case, it is expected that two stations will be added even though
they will have the same address.
- An NDI station can only be added after the corresponding NMI station
was configured with capabilities.
- All the NDI stations will be removed before the NDI interface is brought
down.
- All NMI stations will be removed before NAN is stopped.
- Before NMI sta removal, all corresponding NDI stations will be removed
Add support for adding, removing, and changing NMI and NDI stations.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.d280936ee832.I6d859eee759bb5824a9ffd2984410faf879ba00e@changeid
Link: https://patch.msgid.link/20260318123926.206536-6-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In NAN, unlike in other modes, there is only one set of (HT, VHT, HE)
capabilities that is used for all channels (and bands) used in the NAN
data path.
This set of capabilities will have to be a special one, for example - have
the minimum of (HT-for-5 GHz, HT-for-2.4 GHz), careful handling of the
bits that have a different meaning for each band, etc.
While we could use the exiting sband/iftype capabilities, and require
identical capabilities for all bands (makes no sense since this means
that we will have VHT capabilities in the 2.4 GHz slot),
or require that only one of the sbands will be set,
or have logic to extract the minimum and handle the conflicting bits -
it seems simpler to add a dedicated set of capabilities which is special
for NAN, and is band agnostic, to be populated by the driver.
That way we also let the driver decide how it wants to handle the
conflicting bits.
Add this special set of these capabilities to wiphy:nan_capabilities, to be
populated by the driver.
Send it to user space.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.4b6f3e4a81b4.I45422adc0df3ad4101d857a92e83f0de5cf241e1@changeid
Link: https://patch.msgid.link/20260318123926.206536-5-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
This new interface type represents a NAN data interface (NDI).
It is used for data communication with NAN peers.
Note that the existing NL80211_IFTYPE_NAN interface, which is the NAN
Management Interface (NMI), is used for management communication.
An NDI interface is started when a new NAN data path is about to
be established, and is stopped after the NAN data path is terminated.
- An NDI interface can only be started if the NMI is running, and NAN is
started.
- Before the NMI is stopped, the NDI interfaces will be stopped.
Add the new interface type, handle add/remove operations for it,
and makes sure of the conditions above.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.0d681335c2e2.I92973483e927820ae2297853c141842fdb262747@changeid
Link: https://patch.msgid.link/20260318123926.206536-4-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add an nl80211 API to allow user space to configure the local NAN
schedule.
The local schedule consists of a list of channel definitions and a schedule
map, in which each element covers a time slot and indicates on what
channel the device should be in that time slot.
Channels can be added to schedule even without being scheduled, for
reservation purposes.
A schedule can be configured either immedietally or be deferred, in case
there are already connected peers.
When the deferred flag is set, the command is a request from the device
to perform an announced schedule update: send the updated NAN
Availability - as set in this command - to the peers, and do the
actual switch to the new schedule on the right time (i.e. at the end of
the slot after the slot in which the update was sent to the peers).
In addition, a notification will be sent to indicate a deferred update
completion.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260219114327.ecca178a2de0.Ic977ab08b4ed5cf9b849e55d3a59b01ad3fbd08e@changeid
Link: https://patch.msgid.link/20260318123926.206536-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
trace/ring-buffer/core
The commit f35dbac69421 ("ring-buffer: Fix to update per-subbuf entries of
persistent ring buffer") was a fix and merged upstream. It is needed for
some other work in the ring buffer. The current branch has the remote
buffer code that is shared with the Arm64 subsystem and can't be rebased.
Merge in the upstream commit to allow continuing of the ring buffer work.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
This structure definition is used outside the kernel proper.
For example in kmod and the kernel build environment.
To allow reuse, move it to a new UAPI header.
While it is not a true UAPI, it is a common practice to have
non-UAPI interface definitions in the kernel's UAPI headers.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
|
|
Add a description of struct reader to resolve a kernel-doc warning:
Warning: include/uapi/linux/trace_mmap.h:43 struct member 'reader' not described in 'trace_buffer_meta'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
>From hardware implementation perspective, a guest tegra241-cmdqv hardware
is different than the host hardware:
- Host HW is backed by a VINTF (HYP_OWN=1)
- Guest HW is backed by a VINTF (HYP_OWN=0)
The kernel driver has an implementation requirement of the HYP_OWN bit in
the VM. So, VMM must follow that to allow the same copy of Linux to work.
Add this requirement to the uAPI, which is currently missing.
Fixes: 4dc0d12474f9 ("iommu/tegra241-cmdqv: Add user-space use support")
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The struct pidfd_info currently exposes in a field called coredump_signal the
signal number (si_signo) that triggered the dump (for example, 11 for SIGSEGV).
However, it is also valuable to understand the reason why that signal was sent.
This additional context is provided by the signal code (si_code), such as 2 for
SEGV_ACCERR.
Add a new field to struct pidfd_info called coredump_code with the value of
si_code for the benefit of sysadmins who pipe core dumps to user-space programs
for later analysis. The following snippet illustrates a simplified C program
that consumes coredump_signal and coredump_code, and then logs core dump
signals and codes to a file:
int pidfd = (int)atoi(argv[1]);
struct pidfd_info info = {
.mask = PIDFD_INFO_EXIT | PIDFD_INFO_COREDUMP,
};
if (ioctl(pidfd, PIDFD_GET_INFO, &info) == 0)
if (info.mask & PIDFD_INFO_COREDUMP)
fprintf(f, "PID=%d, si_signo: %d si_code: %d\n",
info.pid, info.coredump_signal, info.coredump_code);
Assuming the program is installed under /usr/local/bin/core-logger, core dump
processing can be enabled by setting /proc/sys/kernel/core_pattern to
'|/usr/local/bin/dumpstuff %F'.
systemd-coredump(8) already uses pidfds to process core dumps, and it could be
extended to include the values of coredump_code too.
Signed-off-by: Emanuele Rocca <emanuele.rocca@arm.com>
Link: https://patch.msgid.link/acE52HIFivNZN3nE@NH27D9T0LF
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Repair all kernel-doc warnings in um_timetravel.h:
- add one enum description
- mark "reserve" as private
- use a leading '@' on current_time
Warning: include/uapi/linux/um_timetravel.h:59 Enum value
'UM_TIMETRAVEL_SHARED_MAX_FDS' not described in enum
'um_timetravel_shared_mem_fds'
Warning: include/uapi/linux/um_timetravel.h:245 union member 'reserve'
not described in 'um_timetravel_schedshm_client'
Warning: include/uapi/linux/um_timetravel.h:288 struct member
'current_time' not described in 'um_timetravel_schedshm'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260226221112.1042008-1-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Cross-merge networking fixes after downstream PR (net-7.0-rc5).
net/netfilter/nft_set_rbtree.c
598adea720b97 ("netfilter: revert nft_set_rbtree: validate open interval overlap")
3aea466a43998 ("netfilter: nft_set_rbtree: don't disable bh when acquiring tree lock")
https://lore.kernel.org/abgaQBpeGstdN4oq@sirena.org.uk
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As currently defined, initial_bytes is monotonically decreasing and
precedes dirty_bytes when reading from the saving file descriptor.
The transition from initial_bytes to dirty_bytes is unidirectional and
irreversible.
The initial_bytes are considered as critical data that is highly
recommended to be transferred to the target as part of PRE_COPY, without
this data, the PRE_COPY phase would be ineffective.
We come to solve the case when a new chunk of critical data is
introduced during the PRE_COPY phase and the driver would like to report
an entirely new value for the initial_bytes.
For that, we extend the VFIO_MIG_GET_PRECOPY_INFO ioctl with an output
flag named VFIO_PRECOPY_INFO_REINIT to allow drivers reporting a new
initial_bytes value during the PRE_COPY phase.
Currently, existing VFIO_MIG_GET_PRECOPY_INFO implementations don't
assign info.flags before copy_to_user(), this effectively echoes
userspace-provided flags back as output, preventing the field from being
used to report new reliable data from the drivers.
Reliable use of the new VFIO_PRECOPY_INFO_REINIT flag requires userspace
to explicitly opt in by enabling the
VFIO_DEVICE_FEATURE_MIG_PRECOPY_INFOv2 device feature.
When the caller opts in, the driver may report an entirely new
value for initial_bytes. It may be larger, it may be smaller, it may
include the previous unread initial_bytes, it may discard the previous
unread initial_bytes, up to the driver logic and state.
The presence of the VFIO_PRECOPY_INFO_REINIT output flag set by the
driver indicates that new initial data is present on the stream.
Once the caller sees this flag, the initial_bytes value should be
re-evaluated relative to the readiness state for transition to
STOP_COPY.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/20260317161753.18964-2-yishaih@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
The file contains a spelling error in a source comment (succes).
Typos in comments reduce readability and make text searches less reliable
for developers and maintainers.
Replace 'succes' with 'success' in the affected comment. This is a
comment-only cleanup and does not change behavior.
Signed-off-by: Joseph Salisbury <joseph.salisbury@oracle.com>
Link: https://lore.kernel.org/r/20260316185617.166414-1-joseph.salisbury@oracle.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
This is the base GICv5 device which is to be used with the
KVM_CREATE_DEVICE ioctl to create a GICv5-based vgic.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260319154937.3619520-9-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Add the bsg_uring_cmd structure to the BSG UAPI header to support
io_uring-based SCSI passthrough operations via IORING_OP_URING_CMD.
Signed-off-by: Yang Xiuwei <yangxiuwei@kylinos.cn>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260317072226.2598233-2-yangxiuwei@kylinos.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Aside from various small improvements/cleanups, not much:
- cfg80211/mac80211: S1G and UHR improvements
- hwsim: incumbent signal report test support
* tag 'wireless-next-2026-03-19' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (31 commits)
qtnfmac: use alloc_netdev macro for single queue devices
wifi: libertas: don't kill URBs in interrupt context
wifi: libertas: use USB anchors for tracking in-flight URBs
wifi: nl80211: use int for band coming from netlink
wifi: rsi_91x_usb: do not pause rfkill polling when stopping mac80211
wifi: mac80211: fix STA link removal during link removal
wifi: nl80211: reject S1G/60G with HT chantype
wifi: ieee80211: fix definition of EHT-MCS 15 in MRU
wifi: cfg80211: check non-S1G width with S1G chandef
wifi: cfg80211: restrict cfg80211_chandef_create() to only HT-based bands
wifi: mac80211: don't use cfg80211_chandef_create() for default chandef
wifi: mac80211: Remove deleted sta links in ieee80211_ml_reconf_work()
wifi: b43: use register definitions in nphy_op_software_rfkill
wifi: cfg80211: split control freq check from chandef check
wifi: mac80211: always use full chanctx compatible check
wifi: mac80211: refactor chandef tracing macros
wifi: mac80211: validate HE 6 GHz operation when EHT is used
wifi: nl80211: split out UHR operation information
wifi: mwifiex: drop redundant device reference
wifi: rt2x00: drop redundant device reference
...
====================
Link: https://patch.msgid.link/20260319082439.79875-3-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Antonio Quartulli says:
====================
Included features:
* use bitops.h API when possible
* send netlink notification in case of client float event
* implement support for asymmetric peer IDs
* consolidate memory allocations during crypto operations
* add netlink notification check in selftests
* add FW mark check in selftest
* tag 'ovpn-net-next-20260317' of https://github.com/OpenVPN/ovpn-net-next:
ovpn: consolidate crypto allocations in one chunk
selftests: ovpn: add test for the FW mark feature
selftests: ovpn: check asymmetric peer-id
ovpn: add support for asymmetric peer IDs
selftests: ovpn: add notification parsing and matching
ovpn: notify userspace on client float event
ovpn: pktid: use bitops.h API
ovpn: use correct array size to parse nested attributes in ovpn_nl_key_swap_doit
selftests: ovpn: allow compiling ovpn-cli.c with mbedtls3
====================
Link: https://patch.msgid.link/20260317104023.192548-1-antonio@openvpn.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add two parameters for drivers supporting Rx CQE coalescing /
descriptor writeback.
ETHTOOL_A_COALESCE_RX_CQE_FRAMES:
Maximum number of frames that can be coalesced into a CQE or
writeback.
ETHTOOL_A_COALESCE_RX_CQE_NSECS:
Max time in nanoseconds after the first packet arrival in a
coalesced CQE or writeback to be sent.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/20260317191826.1346111-2-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently DIV_ROUND_CLOSEST() is only available for the kernel via
include/linux/math.h.
Expose it to userland as well by adding __KERNEL_DIV_ROUND_CLOSEST() as
a common definition in uapi.
Additionally, ensure it allows building ISO C applications by switching
from the 'typeof' GNU extension to the ISO-friendly __typeof__.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260303-rk3588-bgcolor-v8-1-fee377037ad1@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
|
|
If the IOMMU driver reports that ATS is not supported for a device, set
the IOMMU_HW_CAP_PCI_ATS_NOT_SUPPORTED flag in the returned hardware
capabilities.
This uses a negative flag for UAPI compatibility. Existing userspace
assumes ATS is supported if no flag is present. This also ensures that
new userspace works correctly on both old and new kernels, where a
zero value implies ATS support.
When this flag is set, ATS cannot be used for the device. When it is
clear, ATS may be enabled when an appropriate HWPT is attached.
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Shameer Kolothum <skolothumtho@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
In order to support the multipeer architecture, upon connection setup
each side of a tunnel advertises a unique ID that the other side must
include in packets sent to them. Therefore when transmitting a packet, a
peer inserts the recipient's advertised ID for that specific tunnel into
the peer ID field. When receiving a packet, a peer expects to find its
own unique receive ID for that specific tunnel in the peer ID field.
Add support for the TX peer ID and embed it into transmitting packets.
If no TX peer ID is specified, fallback to using the same peer ID both
for RX and TX in order to be compatible with the non-multipeer compliant
peers.
Cc: horms@kernel.org
Cc: donald.hunter@gmail.com
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
|
|
Send a netlink notification when a client updates its remote UDP
endpoint. The notification includes the new IP address, port, and scope
ID (for IPv6).
Cc: linux-kselftest@vger.kernel.org
Cc: horms@kernel.org
Cc: shuah@kernel.org
Cc: donald.hunter@gmail.com
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
|
