| Age | Commit message (Collapse) | Author |
|---|
|
Add support for FUTEX_WAKE/WAIT primitives.
IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as
it does support passing in a bitset.
Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and
FUTEX_WAIT_BITSET.
For both of them, they are using the futex2 interface.
FUTEX_WAKE is straight forward, as those can always be done directly from
the io_uring submission without needing async handling. For FUTEX_WAIT,
things are a bit more complicated. If the futex isn't ready, then we
rely on a callback via futex_queue->wake() when someone wakes up the
futex. From that calback, we queue up task_work with the original task,
which will post a CQE and wake it, if necessary.
Cancelations are supported, both from the application point-of-view,
but also to be able to cancel pending waits if the ring exits before
all events have occurred. The return value of futex_unqueue() is used
to gate who wins the potential race between cancelation and futex
wakeups. Whomever gets a 'ret == 1' return from that claims ownership
of the io_uring futex request.
This is just the barebones wait/wake support. PI or REQUEUE support is
not added at this point, unclear if we might look into that later.
Likewise, explicit timeouts are not supported either. It is expected
that users that need timeouts would do so via the usual io_uring
mechanism to do that using linked timeouts.
The SQE format is as follows:
`addr` Address of futex
`fd` futex2(2) FUTEX2_* flags
`futex_flags` io_uring specific command flags. None valid now.
`addr2` Value of futex
`addr3` Mask to wake/wait
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The memory layout of struct vfio_device_ioeventfd is
architecture-dependent due to a u64 field and a struct size that is not
a multiple of 8 bytes:
- On x86_64 the struct size is padded to a multiple of 8 bytes.
- On x32 the struct size is only a multiple of 4 bytes, not 8.
- Other architectures may vary.
Use __aligned_u64 to make memory layout consistent. This reduces the
chance that 32-bit userspace on a 64-bit kernel breakage.
This patch increases the struct size on x32 but this is safe because of
the struct's argsz field. The kernel may grow the struct as long as it
still supports smaller argsz values from userspace (e.g. applications
compiled against older kernel headers).
The code that uses struct vfio_device_ioeventfd already works correctly
when the struct size grows, so only the struct definition needs to be
changed.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20230918205617.1478722-4-stefanha@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
The memory layout of struct vfio_device_gfx_plane_info is
architecture-dependent due to a u64 field and a struct size that is not
a multiple of 8 bytes:
- On x86_64 the struct size is padded to a multiple of 8 bytes.
- On x32 the struct size is only a multiple of 4 bytes, not 8.
- Other architectures may vary.
Use __aligned_u64 to make memory layout consistent. This reduces the
chance of 32-bit userspace on a 64-bit kernel breakage.
This patch increases the struct size on x32 but this is safe because of
the struct's argsz field. The kernel may grow the struct as long as it
still supports smaller argsz values from userspace (e.g. applications
compiled against older kernel headers).
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20230918205617.1478722-3-stefanha@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
u64 alignment behaves differently depending on the architecture and so
<uapi/linux/types.h> offers __aligned_u64 to achieve consistent behavior
in kernel<->userspace ABIs.
There are structs in <uapi/linux/vfio.h> that can trivially be updated
to __aligned_u64 because the struct sizes are multiples of 8 bytes.
There is no change in memory layout on any CPU architecture and
therefore this change is safe.
The commits that follow this one handle the trickier cases where
explanation about ABI breakage is necessary.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20230918205617.1478722-2-stefanha@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
add bus mastering control to VFIO_DEVICE_FEATURE IOCTL. The VFIO user
can use this feature to enable or disable the Bus Mastering of a
device bound to VFIO.
Co-developed-by: Shubham Rohila <shubham.rohila@amd.com>
Signed-off-by: Shubham Rohila <shubham.rohila@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Link: https://lore.kernel.org/r/20230915045423.31630-2-nipun.gupta@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into io_uring-futex
Pull in locking/core from the tip tree, to get the futex2 dependencies
from Peter Zijlstra.
* 'locking/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
locking/ww_mutex/test: Make sure we bail out instead of livelock
locking/ww_mutex/test: Fix potential workqueue corruption
locking/ww_mutex/test: Use prng instead of rng to avoid hangs at bootup
futex: Add sys_futex_requeue()
futex: Add flags2 argument to futex_requeue()
futex: Propagate flags into get_futex_key()
futex: Add sys_futex_wait()
futex: FLAGS_STRICT
futex: Add sys_futex_wake()
futex: Validate futex value against futex size
futex: Flag conversion
futex: Extend the FUTEX2 flags
futex: Clarify FUTEX2 flags
asm-generic: ticket-lock: Optimize arch_spin_value_unlocked()
futex/pi: Fix recursive rt_mutex waiter state
locking/rtmutex: Add a lockdep assert to catch potential nested blocking
locking/rtmutex: Use rt_mutex specific scheduler helpers
sched: Provide rt_mutex specific scheduler helpers
sched: Extract __schedule_loop()
locking/rtmutex: Avoid unconditional slowpath for DEBUG_RT_MUTEXES
...
|
|
* for-6.7/io_uring:
io_uring: cancelable uring_cmd
io_uring: retain top 8bits of uring_cmd flags for kernel internal use
io_uring: add IORING_OP_WAITID support
exit: add internal include file with helpers
exit: add kernel_waitid_prepare() helper
exit: move core of do_wait() into helper
exit: abstract out should_wake helper for child_wait_callback()
io_uring/rw: add support for IORING_OP_READ_MULTISHOT
io_uring/rw: mark readv/writev as vectored in the opcode definition
io_uring/rw: split io_read() into a helper
|
|
Retain top 8bits of uring_cmd flags for kernel internal use, so that we
can move IORING_URING_CMD_POLLED out of uapi header.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Create controls for Nuvoton NPCM video driver to support setting
capture mode of Video Capture/Differentiation (VCD) engine and getting
the count of HEXTILE rectangles that is compressed by Encoding
Compression Engine (ECE).
Signed-off-by: Marvin Lin <milkfafa@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add a control base for Nuvoton NPCM driver controls, and reserve 16
controls.
Signed-off-by: Marvin Lin <milkfafa@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add HEXTILE compressed format which is defined in Remote Framebuffer
Protocol (RFC 6143, chapter 7.7.4 Hextile Encoding) and is used by
Encoding Compression Engine (ECE) present on Nuvoton NPCM SoCs.
Signed-off-by: Marvin Lin <milkfafa@gmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Until now, fscrypt has always used the filesystem block size as the
granularity of file contents encryption. Two scenarios have come up
where a sub-block granularity of contents encryption would be useful:
1. Inline crypto hardware that only supports a crypto data unit size
that is less than the filesystem block size.
2. Support for direct I/O at a granularity less than the filesystem
block size, for example at the block device's logical block size in
order to match the traditional direct I/O alignment requirement.
(1) first came up with older eMMC inline crypto hardware that only
supports a crypto data unit size of 512 bytes. That specific case
ultimately went away because all systems with that hardware continued
using out of tree code and never actually upgraded to the upstream
inline crypto framework. But, now it's coming back in a new way: some
current UFS controllers only support a data unit size of 4096 bytes, and
there is a proposal to increase the filesystem block size to 16K.
(2) was discussed as a "nice to have" feature, though not essential,
when support for direct I/O on encrypted files was being upstreamed.
Still, the fact that this feature has come up several times does suggest
it would be wise to have available. Therefore, this patch implements it
by using one of the reserved bytes in fscrypt_policy_v2 to allow users
to select a sub-block data unit size. Supported data unit sizes are
powers of 2 between 512 and the filesystem block size, inclusively.
Support is implemented for both the FS-layer and inline crypto cases.
This patch focuses on the basic support for sub-block data units. Some
things are out of scope for this patch but may be addressed later:
- Supporting sub-block data units in combination with
FSCRYPT_POLICY_FLAG_IV_INO_LBLK_64, in most cases. Unfortunately this
combination usually causes data unit indices to exceed 32 bits, and
thus fscrypt_supported_policy() correctly disallows it. The users who
potentially need this combination are using f2fs. To support it, f2fs
would need to provide an option to slightly reduce its max file size.
- Supporting sub-block data units in combination with
FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32. This has the same problem
described above, but also it will need special code to make DUN
wraparound still happen on a FS block boundary.
- Supporting use case (2) mentioned above. The encrypted direct I/O
code will need to stop requiring and assuming FS block alignment.
This won't be hard, but it belongs in a separate patch.
- Supporting this feature on filesystems other than ext4 and f2fs.
(Filesystems declare support for it via their fscrypt_operations.)
On UBIFS, sub-block data units don't make sense because UBIFS encrypts
variable-length blocks as a result of compression. CephFS could
support it, but a bit more work would be needed to make the
fscrypt_*_block_inplace functions play nicely with sub-block data
units. I don't think there's a use case for this on CephFS anyway.
Link: https://lore.kernel.org/r/20230925055451.59499-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Add missed value to kprobe attached through perf link info to
hold the stats of missed kprobe handler execution.
The kprobe's missed counter gets incremented when kprobe handler
is not executed due to another kprobe running on the same cpu.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-4-jolsa@kernel.org
|
|
Add missed value to kprobe_multi link info to hold the stats of missed
kprobe_multi probe.
The missed counter gets incremented when fprobe fails the recursion
check or there's no rethook available for return probe. In either
case the attached bpf program is not executed.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Reviewed-by: Song Liu <song@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-3-jolsa@kernel.org
|
|
Introduce new feature flags for OWE offload that driver can
advertise to indicate kernel/application space to avoid DH IE
handling. When this flag is advertised, the driver/device will
take care of DH IE inclusion and processing of peer DH IE to
generate PMK.
Signed-off-by: Vinayak Yadawad <vinayak.yadawad@broadcom.com>
Link: https://lore.kernel.org/r/f891cce4b52c939dfc6b71bb2f73e560e8cad287.1695374530.git.vinayak.yadawad@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Such a generic struct tag shouldn't have been exposed in a public
header. Since it's undocumented, we can assume it's a historical
accident. And since no software (at least on Debian) relies on this
tag, we can safely remove it.
Here are the results of a Debian Code Search[1]:
$ # packages that contain 'include [<"]linux/elf\.h[">]'
$ curl -s https://codesearch.debian.net/results/e5e7c74dfcdae609/packages.txt > include
$ # packages that contain '\bstruct dynamic\b'
$ curl -s https://codesearch.debian.net/results/b23577e099048c6a/packages.txt > struct
$ cat struct include | sort | uniq -d
chromium
hurd
linux
qemu
qt6-webengine
qtwebengine-opensource-src
$ # chromium: Seems to hold a copy of the UAPI header. No uses of the tag.
$ # hurd: Same thing as chromium.
$ # linux: :)
$ # qemu: Same thing as chromium.
$ # qt6-webengine: Same thing as all.
$ # qtwebengine-opensource-src: Yet another copy.
Link: https://codesearch.debian.net/ [1]
Link: https://lore.kernel.org/linux-mm/87wmxdokum.fsf@email.froward.int.ebiederm.org/T/
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Rolf Eike Beer <eb@emlix.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: Alejandro Colomar <alx@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The deta angle and deta velocity channels were added in parallel with
color temperature and chromacity so this merge had to assign a
consistent order. I put the color related ones second.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
In most cases, ambient color sensors also support the x and y light
colors, which represent the coordinates on the CIE 1931 chromaticity
diagram. Thus, add channel type for chromaticity.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/r/20230919081054.2050714-7-Basavaraj.Natikar@amd.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
In most cases, ambient color sensors also support light color
temperature, which is measured in kelvin. Thus, add channel type light
color temperature.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Link: https://lore.kernel.org/r/20230919081054.2050714-3-Basavaraj.Natikar@amd.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Fix UAPI stddef.h to avoid C++-ism (Alexey Dobriyan)
- Fix harmless UAPI stddef.h header guard endif (Alexey Dobriyan)
* tag 'hardening-v6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
uapi: stddef.h: Fix __DECLARE_FLEX_ARRAY for C++
uapi: stddef.h: Fix header guard location
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This adds support for an async version of waitid(2), in a fully async
version. If an event isn't immediately available, wait for a callback
to trigger a retry.
The format of the sqe is as follows:
sqe->len The 'which', the idtype being queried/waited for.
sqe->fd The 'pid' (or id) being waited for.
sqe->file_index The 'options' being set.
sqe->addr2 A pointer to siginfo_t, if any, being filled in.
buf_index, add3, and waitid_flags are reserved/unused for now.
waitid_flags will be used for options for this request type. One
interesting use case may be to add multi-shot support, so that the
request stays armed and posts a notification every time a monitored
process state change occurs.
Note that this does not support rusage, on Arnd's recommendation.
See the waitid(2) man page for details on the arguments.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This behaves like IORING_OP_READ, except:
1) It only supports pollable files (eg pipes, sockets, etc). Note that
for sockets, you probably want to use recv/recvmsg with multishot
instead.
2) It supports multishot mode, meaning it will repeatedly trigger a
read and fill a buffer when data is available. This allows similar
use to recv/recvmsg but on non-sockets, where a single request will
repeatedly post a CQE whenever data is read from it.
3) Because of #2, it must be used with provided buffers. This is
uniformly true across any request type that supports multishot and
transfers data, with the reason being that it's obviously not
possible to pass in a single buffer for the data, as multiple reads
may very well trigger before an application has a chance to process
previous CQEs and the data passed from them.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add the definition for the missing but always intended extra sizes,
and add a NUMA flag for the planned numa extention.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20230921105247.617057368@noisy.programming.kicks-ass.net
|
|
sys_futex_waitv() is part of the futex2 series (the first and only so
far) of syscalls and has a flags field per futex (as opposed to flags
being encoded in the futex op).
This new flags field has a new namespace, which unfortunately isn't
super explicit. Notably it currently takes FUTEX_32 and
FUTEX_PRIVATE_FLAG.
Introduce the FUTEX2 namespace to clarify this
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20230921105247.507327749@noisy.programming.kicks-ass.net
|
|
These flags (for GEM and SVM allocations) allocate
memory that allows for system-scope atomic semantics.
On GFX943 these flags cause caches to be avoided on
non-local memory.
On all other ASICs they are identical in functionality to the
equivalent COHERENT flags.
Corresponding Thunk patch is at
https://github.com/RadeonOpenCompute/ROCT-Thunk-Interface/pull/88
Reviewed-by: David Yat Sin <David.YatSin@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The UART_IIR_64BYTE_FIFO is always being used in conjunction with
UART_IIR_FIFO_ENABLED. Introduce a joined UART_IIR_FIFO_ENABLED_16750
definition and use it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230911144308.4169752-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
6 GHz regulatory domains introduces Power Spectral Density (PSD).
The PSD value of the regulatory rule should be taken into effect
for the ieee80211_channels falling into that particular regulatory
rule. Save the values in the channel which has PSD value and add
nl80211 attributes accordingly to handle it.
Co-developed-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Link: https://lore.kernel.org/r/20230914082026.3709-1-quic_wgong@quicinc.com
[use hole in chan flags, reword docs]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Alexei Starovoitov says:
====================
The following pull-request contains BPF updates for your *net-next* tree.
We've added 73 non-merge commits during the last 9 day(s) which contain
a total of 79 files changed, 5275 insertions(+), 600 deletions(-).
The main changes are:
1) Basic BTF validation in libbpf, from Andrii Nakryiko.
2) bpf_assert(), bpf_throw(), exceptions in bpf progs, from Kumar Kartikeya Dwivedi.
3) next_thread cleanups, from Oleg Nesterov.
4) Add mcpu=v4 support to arm32, from Puranjay Mohan.
5) Add support for __percpu pointers in bpf progs, from Yonghong Song.
6) Fix bpf tailcall interaction with bpf trampoline, from Leon Hwang.
7) Raise irq_work in bpf_mem_alloc while irqs are disabled to improve refill probabablity, from Hou Tao.
Please consider pulling these changes from:
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git
Thanks a lot!
Also thanks to reporters, reviewers and testers of commits in this pull-request:
Alan Maguire, Andrey Konovalov, Dave Marchevsky, "Eric W. Biederman",
Jiri Olsa, Maciej Fijalkowski, Quentin Monnet, Russell King (Oracle),
Song Liu, Stanislav Fomichev, Yonghong Song
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce a new helper devl_port_fn_devlink_set() to be used by driver
assigning a devlink instance to the peer devlink port function.
Expose this to user over new netlink attribute nested under port
function nest to expose devlink handle related to the port function.
This is particularly helpful for user to understand the relationship
between devlink instances created for SFs and the port functions
they belong to.
Note that caller of devlink_port_notify() needs to hold devlink
instance lock, put the assertion to devl_port_fn_devlink_set() to make
this requirement explicit. Also note the limitations that only allow to
make this assignment for registered objects.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case netdevice represents a SyncE port, the user needs to understand
the connection between netdevice and associated DPLL pin. There might me
multiple netdevices pointing to the same pin, in case of VF/SF
implementation.
Add a IFLA Netlink attribute to nest the DPLL pin handle, similar to
how it is implemented for devlink port. Add a struct dpll_pin pointer
to netdev and protect access to it by RTNL. Expose netdev_dpll_pin_set()
and netdev_dpll_pin_clear() helpers to the drivers so they can set/clear
the DPLL pin relationship to netdev.
Note that during the lifetime of struct dpll_pin the pin handle does not
change. Therefore it is save to access it lockless. It is drivers
responsibility to call netdev_dpll_pin_clear() before dpll_pin_put().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a protocol spec for DPLL.
Add code generated from the spec.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The 2023 SIGCOMM paper "Improving Network Availability with Protective
ReRoute" has indicated Linux TCP's RTO-triggered txhash rehashing can
effectively reduce application disruption during outages. To better
measure the efficacy of this feature, this patch adds three more
detailed stats during RTO recovery and exports via TCP_INFO.
Applications and monitoring systems can leverage this data to measure
the network path diversity and end-to-end repair latency during network
outages to improve their network infrastructure.
The following counters are added to tcp_sock in order to track RTO
events over the lifetime of a TCP socket.
1. u16 total_rto - Counts the total number of RTO timeouts.
2. u16 total_rto_recoveries - Counts the total number of RTO recoveries.
3. u32 total_rto_time - Counts the total time spent (ms) in RTO
recoveries. (time spent in CA_Loss and
CA_Recovery states)
To compute total_rto_time, we add a new u32 rto_stamp field to
tcp_sock. rto_stamp records the start timestamp (ms) of the last RTO
recovery (CA_Loss).
Corresponding fields are also added to the tcp_info struct.
Signed-off-by: Aananth V <aananthv@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexei Starovoitov says:
====================
The following pull-request contains BPF updates for your *net* tree.
We've added 21 non-merge commits during the last 8 day(s) which contain
a total of 21 files changed, 450 insertions(+), 36 deletions(-).
The main changes are:
1) Adjust bpf_mem_alloc buckets to match ksize(), from Hou Tao.
2) Check whether override is allowed in kprobe mult, from Jiri Olsa.
3) Fix btf_id symbol generation with ld.lld, from Jiri and Nick.
4) Fix potential deadlock when using queue and stack maps from NMI, from Toke Høiland-Jørgensen.
Please consider pulling these changes from:
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
Thanks a lot!
Also thanks to reporters, reviewers and testers of commits in this pull-request:
Alan Maguire, Biju Das, Björn Töpel, Dan Carpenter, Daniel Borkmann,
Eduard Zingerman, Hsin-Wei Hung, Marcus Seyfarth, Nathan Chancellor,
Satya Durga Srinivasu Prabhala, Song Liu, Stephen Rothwell
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new xdp-rx-metadata-features member to netdev netlink
which exports a bitmask of supported kfuncs. Most of the patch
is autogenerated (headers), the only relevant part is netdev.yaml
and the changes in netdev-genl.c to marshal into netlink.
Example output on veth:
$ ip link add veth0 type veth peer name veth1 # ifndex == 12
$ ./tools/net/ynl/samples/netdev 12
Select ifc ($ifindex; or 0 = dump; or -2 ntf check): 12
veth1[12] xdp-features (23): basic redirect rx-sg xdp-rx-metadata-features (3): timestamp hash xdp-zc-max-segs=0
Cc: netdev@vger.kernel.org
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230913171350.369987-3-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
__DECLARE_FLEX_ARRAY(T, member) macro expands to
struct {
struct {} __empty_member;
T member[];
};
which is subtly wrong in C++ because sizeof(struct{}) is 1 not 0,
changing UAPI structures layouts.
This can be fixed by expanding to
T member[];
Now g++ doesn't like "T member[]" either, throwing errors on
the following code:
struct S {
union {
T1 member1[];
T2 member2[];
};
};
or
struct S {
T member[];
};
Use "T member[0];" which seems to work and does the right thing wrt
structure layout.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Fixes: 3080ea5553cc ("stddef: Introduce DECLARE_FLEX_ARRAY() helper")
Link: https://lore.kernel.org/r/97242381-f1ec-4a4a-9472-1a464f575657@p183
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The #endif for the header guard wasn't at the end of the header. This
was harmless since the define that escaped was already testing for its
own redefinition. Regardless, move the #endif to the correct place.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Fixes: c8248faf3ca2 ("Compiler Attributes: counted_by: Adjust name and identifier expansion")
Link: https://lore.kernel.org/r/b1f5081e-339d-421d-81b2-cbb94e1f6f5f@p183
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Add a new flag 'update' which is set to true during start_ap()
if (and only if) one of the following two conditions are met:
- Userspace passed an empty nested attribute which indicates that
the feature should be disabled and templates deleted.
- Userspace passed all the parameters for the nested attribute.
Existing configuration will not be changed while the flag
remains false.
Add similar changes for unsolicited broadcast probe response
transmission.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230727174100.11721-2-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
There really isn't any support for scanning at different
channel widths than 20 MHz since there's no way to set it.
Remove this support for now, if somebody wants to maintain
this whole thing later we can revisit how it should work.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The delta velocity is defined as a piece-wise integration of
acceleration data. The delta velocity represents the linear velocity
change between two consecutive measurements and it
is measured in m / s (meters per second).
In order to track the total linear velocity change during a desired
period of time, simply sum-up the delta velocity samples acquired
during that time.
IIO currently does not offer a suitable channel type for this
type of measurements hence this patch adds it.
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230808075059.645525-3-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The delta angle is defined as a piece-wise integration of angular
velocity data. The delta angle represents the amount of
angular displacement between two consecutive measurements and it
is measured in radians.
In order to track the total angular displacement during a desired
period of time, simply sum-up the delta angle samples acquired
during that time.
IIO currently does not offer a suitable channel type for this
type of measurements hence this patch adds it.
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230808075059.645525-2-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Commit 151e887d8ff9 ("veth: Fixing transmit return status for dropped
packets") exposed the fact that bpf_clone_redirect is capable of
returning raw NET_XMIT_XXX return codes.
This is in the conflict with its UAPI doc which says the following:
"0 on success, or a negative error in case of failure."
Update the UAPI to reflect the fact that bpf_clone_redirect can
return positive error numbers, but don't explicitly define
their meaning.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230911194731.286342-1-sdf@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- The kernel now dynamically probes for misaligned access speed, as
opposed to relying on a table of known implementations.
- Support for non-coherent devices on systems using the Andes AX45MP
core, including the RZ/Five SoCs.
- Support for the V extension in ptrace(), again.
- Support for KASLR.
- Support for the BPF prog pack allocator in RISC-V.
- A handful of bug fixes and cleanups.
* tag 'riscv-for-linus-6.6-mw2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (25 commits)
soc: renesas: Kconfig: For ARCH_R9A07G043 select the required configs if dependencies are met
riscv: Kconfig.errata: Add dependency for RISCV_SBI in ERRATA_ANDES config
riscv: Kconfig.errata: Drop dependency for MMU in ERRATA_ANDES_CMO config
riscv: Kconfig: Select DMA_DIRECT_REMAP only if MMU is enabled
bpf, riscv: use prog pack allocator in the BPF JIT
riscv: implement a memset like function for text
riscv: extend patch_text_nosync() for multiple pages
bpf: make bpf_prog_pack allocator portable
riscv: libstub: Implement KASLR by using generic functions
libstub: Fix compilation warning for rv32
arm64: libstub: Move KASLR handling functions to kaslr.c
riscv: Dump out kernel offset information on panic
riscv: Introduce virtual kernel mapping KASLR
RISC-V: Add ptrace support for vectors
soc: renesas: Kconfig: Select the required configs for RZ/Five SoC
cache: Add L2 cache management for Andes AX45MP RISC-V core
dt-bindings: cache: andestech,ax45mp-cache: Add DT binding documentation for L2 cache controller
riscv: mm: dma-noncoherent: nonstandard cache operations support
riscv: errata: Add Andes alternative ports
riscv: asm: vendorid_list: Add Andes Technology to the vendors list
...
|
|
This resurrects the vector ptrace() support that was removed for 6.5 due
to some bugs cropping up as part of the GDB review process.
* b4-shazam-merge:
RISC-V: Add ptrace support for vectors
Link: https://lore.kernel.org/r/20230825050248.32681-1-andy.chiu@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
Now 'BPF_MAP_TYPE_CGRP_STORAGE + local percpu ptr'
can cover all BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE functionality
and more. So mark BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE deprecated.
Also make changes in selftests/bpf/test_bpftool_synctypes.py
and selftest libbpf_str to fix otherwise test errors.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230827152837.2003563-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking updates from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- eth: stmmac: fix failure to probe without MAC interface specified
Current release - new code bugs:
- docs: netlink: fix missing classic_netlink doc reference
Previous releases - regressions:
- deal with integer overflows in kmalloc_reserve()
- use sk_forward_alloc_get() in sk_get_meminfo()
- bpf_sk_storage: fix the missing uncharge in sk_omem_alloc
- fib: avoid warn splat in flow dissector after packet mangling
- skb_segment: call zero copy functions before using skbuff frags
- eth: sfc: check for zero length in EF10 RX prefix
Previous releases - always broken:
- af_unix: fix msg_controllen test in scm_pidfd_recv() for
MSG_CMSG_COMPAT
- xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()
- netfilter:
- nft_exthdr: fix non-linear header modification
- xt_u32, xt_sctp: validate user space input
- nftables: exthdr: fix 4-byte stack OOB write
- nfnetlink_osf: avoid OOB read
- one more fix for the garbage collection work from last release
- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
- bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t
- handshake: fix null-deref in handshake_nl_done_doit()
- ip: ignore dst hint for multipath routes to ensure packets are
hashed across the nexthops
- phy: micrel:
- correct bit assignments for cable test errata
- disable EEE according to the KSZ9477 errata
Misc:
- docs/bpf: document compile-once-run-everywhere (CO-RE) relocations
- Revert "net: macsec: preserve ingress frame ordering", it appears
to have been developed against an older kernel, problem doesn't
exist upstream"
* tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()
Revert "net: team: do not use dynamic lockdep key"
net: hns3: remove GSO partial feature bit
net: hns3: fix the port information display when sfp is absent
net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue
net: hns3: fix debugfs concurrency issue between kfree buffer and read
net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()
net: hns3: Support query tx timeout threshold by debugfs
net: hns3: fix tx timeout issue
net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)
netfilter: nf_tables: Unbreak audit log reset
netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
netfilter: nfnetlink_osf: avoid OOB read
netfilter: nftables: exthdr: fix 4-byte stack OOB write
selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
bpf: bpf_sk_storage: Fix invalid wait context lockdep report
s390/bpf: Pass through tail call counter in trampolines
...
|
|
Add a brief description to the enum's comment.
Fixes: 837830a4b439 ("netfilter: nf_tables: add NFTA_RULE_CHAIN_ID attribute")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Revert non-waiting FLUSH due to a regression
- Fix a lookup counter leak in readdirplus
- Add an option to allow shared mmaps in no-cache mode
- Add btime support and statx intrastructure to the protocol
- Invalidate positive/negative dentry on failed create/delete
* tag 'fuse-update-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: conditionally fill kstat in fuse_do_statx()
fuse: invalidate dentry on EEXIST creates or ENOENT deletes
fuse: cache btime
fuse: implement statx
fuse: add ATTR_TIMEOUT macro
fuse: add STATX request
fuse: handle empty request_mask in statx
fuse: write back dirty pages before direct write in direct_io_relax mode
fuse: add a new fuse init flag to relax restrictions in no cache mode
fuse: invalidate page cache pages before direct write
fuse: nlookup missing decrement in fuse_direntplus_link
Revert "fuse: in fuse_flush only wait if someone wants the return code"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson:
"Add support for the GLINK flow control signals, and expose this to the
user through the rpmsg_char interface. Add missing kstrdup() failure
handling during allocation of GLINK channel objects"
* tag 'rpmsg-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
rpmsg: glink: Avoid dereferencing NULL channel
rpmsg: glink: Add check for kstrdup
rpmsg: char: Add RPMSG GET/SET FLOWCONTROL IOCTL support
rpmsg: glink: Add support to handle signals command
rpmsg: core: Add signal API support
|
|
Pull virtio updates from Michael Tsirkin:
"A small pull request this time around, mostly because the vduse
network got postponed to next relase so we can be sure we got the
security store right"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_ring: fix avail_wrap_counter in virtqueue_add_packed
virtio_vdpa: build affinity masks conditionally
virtio_net: merge dma operations when filling mergeable buffers
virtio_ring: introduce dma sync api for virtqueue
virtio_ring: introduce dma map api for virtqueue
virtio_ring: introduce virtqueue_reset()
virtio_ring: separate the logic of reset/enable from virtqueue_resize
virtio_ring: correct the expression of the description of virtqueue_resize()
virtio_ring: skip unmap for premapped
virtio_ring: introduce virtqueue_dma_dev()
virtio_ring: support add premapped buf
virtio_ring: introduce virtqueue_set_dma_premapped()
virtio_ring: put mapping error check in vring_map_one_sg
virtio_ring: check use_dma_api before unmap desc for indirect
vdpa_sim: offer VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK
vdpa: add get_backend_features vdpa operation
vdpa: accept VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK backend feature
vdpa: add VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK flag
vdpa/mlx5: Remove unused function declarations
|
