| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit 25a9c8a4431c364f97f75558cb346d2ad3f53fbb ]
syzbot reported a warning in __local_bh_enable_ip(). [0]
Commit 8d61f926d420 ("netlink: fix potential deadlock in
netlink_set_err()") converted read_lock(&nl_table_lock) to
read_lock_irqsave() in __netlink_diag_dump() to prevent a deadlock.
However, __netlink_diag_dump() calls sock_i_ino() that uses
read_lock_bh() and read_unlock_bh(). If CONFIG_TRACE_IRQFLAGS=y,
read_unlock_bh() finally enables IRQ even though it should stay
disabled until the following read_unlock_irqrestore().
Using read_lock() in sock_i_ino() would trigger a lockdep splat
in another place that was fixed in commit f064af1e500a ("net: fix
a lockdep splat"), so let's add __sock_i_ino() that would be safe
to use under BH disabled.
[0]:
WARNING: CPU: 0 PID: 5012 at kernel/softirq.c:376 __local_bh_enable_ip+0xbe/0x130 kernel/softirq.c:376
Modules linked in:
CPU: 0 PID: 5012 Comm: syz-executor487 Not tainted 6.4.0-rc7-syzkaller-00202-g6f68fc395f49 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
RIP: 0010:__local_bh_enable_ip+0xbe/0x130 kernel/softirq.c:376
Code: 45 bf 01 00 00 00 e8 91 5b 0a 00 e8 3c 15 3d 00 fb 65 8b 05 ec e9 b5 7e 85 c0 74 58 5b 5d c3 65 8b 05 b2 b6 b4 7e 85 c0 75 a2 <0f> 0b eb 9e e8 89 15 3d 00 eb 9f 48 89 ef e8 6f 49 18 00 eb a8 0f
RSP: 0018:ffffc90003a1f3d0 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000201 RCX: 1ffffffff1cf5996
RDX: 0000000000000000 RSI: 0000000000000201 RDI: ffffffff8805c6f3
RBP: ffffffff8805c6f3 R08: 0000000000000001 R09: ffff8880152b03a3
R10: ffffed1002a56074 R11: 0000000000000005 R12: 00000000000073e4
R13: dffffc0000000000 R14: 0000000000000002 R15: 0000000000000000
FS: 0000555556726300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000045ad50 CR3: 000000007c646000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
sock_i_ino+0x83/0xa0 net/core/sock.c:2559
__netlink_diag_dump+0x45c/0x790 net/netlink/diag.c:171
netlink_diag_dump+0xd6/0x230 net/netlink/diag.c:207
netlink_dump+0x570/0xc50 net/netlink/af_netlink.c:2269
__netlink_dump_start+0x64b/0x910 net/netlink/af_netlink.c:2374
netlink_dump_start include/linux/netlink.h:329 [inline]
netlink_diag_handler_dump+0x1ae/0x250 net/netlink/diag.c:238
__sock_diag_cmd net/core/sock_diag.c:238 [inline]
sock_diag_rcv_msg+0x31e/0x440 net/core/sock_diag.c:269
netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2547
sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:280
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x925/0xe30 net/netlink/af_netlink.c:1914
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg+0xde/0x190 net/socket.c:747
____sys_sendmsg+0x71c/0x900 net/socket.c:2503
___sys_sendmsg+0x110/0x1b0 net/socket.c:2557
__sys_sendmsg+0xf7/0x1c0 net/socket.c:2586
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f5303aaabb9
Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc7506e548 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5303aaabb9
RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003
RBP: 00007f5303a6ed60 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5303a6edf0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Fixes: 8d61f926d420 ("netlink: fix potential deadlock in netlink_set_err()")
Reported-by: syzbot+5da61cf6a9bc1902d422@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=5da61cf6a9bc1902d422
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230626164313.52528-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d06f925f13976ab82167c93467c70a337a0a3cda ]
When using the felix driver (the only one which supports UC filtering
and MC filtering) as a DSA master for a random other DSA switch, one can
see the following stack trace when the downstream switch ports join a
VLAN-aware bridge:
=============================
WARNING: suspicious RCU usage
-----------------------------
net/8021q/vlan_core.c:238 suspicious rcu_dereference_protected() usage!
stack backtrace:
Workqueue: dsa_ordered dsa_slave_switchdev_event_work
Call trace:
lockdep_rcu_suspicious+0x170/0x210
vlan_for_each+0x8c/0x188
dsa_slave_sync_uc+0x128/0x178
__hw_addr_sync_dev+0x138/0x158
dsa_slave_set_rx_mode+0x58/0x70
__dev_set_rx_mode+0x88/0xa8
dev_uc_add+0x74/0xa0
dsa_port_bridge_host_fdb_add+0xec/0x180
dsa_slave_switchdev_event_work+0x7c/0x1c8
process_one_work+0x290/0x568
What it's saying is that vlan_for_each() expects rtnl_lock() context and
it's not getting it, when it's called from the DSA master's ndo_set_rx_mode().
The caller of that - dsa_slave_set_rx_mode() - is the slave DSA
interface's dsa_port_bridge_host_fdb_add() which comes from the deferred
dsa_slave_switchdev_event_work().
We went to great lengths to avoid the rtnl_lock() context in that call
path in commit 0faf890fc519 ("net: dsa: drop rtnl_lock from
dsa_slave_switchdev_event_work"), and calling rtnl_lock() is simply not
an option due to the possibility of deadlocking when calling
dsa_flush_workqueue() from the call paths that do hold rtnl_lock() -
basically all of them.
So, when the DSA master calls vlan_for_each() from its ndo_set_rx_mode(),
the state of the 8021q driver on this device is really not protected
from concurrent access by anything.
Looking at net/8021q/, I don't think that vlan_info->vid_list was
particularly designed with RCU traversal in mind, so introducing an RCU
read-side form of vlan_for_each() - vlan_for_each_rcu() - won't be so
easy, and it also wouldn't be exactly what we need anyway.
In general I believe that the solution isn't in net/8021q/ anyway;
vlan_for_each() is not cut out for this task. DSA doesn't need rtnl_lock()
to be held per se - since it's not a netdev state change that we're
blocking, but rather, just concurrent additions/removals to a VLAN list.
We don't even need sleepable context - the callback of vlan_for_each()
just schedules deferred work.
The proposed escape is to remove the dependency on vlan_for_each() and
to open-code a non-sleepable, rtnl-free alternative to that, based on
copies of the VLAN list modified from .ndo_vlan_rx_add_vid() and
.ndo_vlan_rx_kill_vid().
Fixes: 64fdc5f341db ("net: dsa: sync unicast and multicast addresses for VLAN filters too")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230626154402.3154454-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e8c2af660ba0790afd14d5cbc2fd05c6dc85e207 ]
Since regulatory disconnect was added, OCB and NAN interface
types were added, which made it completely unusable for any
driver that allowed OCB/NAN. Add OCB/NAN (though NAN doesn't
do anything, we don't have any info) and also remove all the
logic that opts out, so it won't be broken again if/when new
interface types are added.
Fixes: 6e0bd6c35b02 ("cfg80211: 802.11p OCB mode handling")
Fixes: cb3b7d87652a ("cfg80211: add start / stop NAN commands")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230616222844.2794d1625a26.I8e78a3789a29e6149447b3139df724a6f1b46fc3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 938154b93be8cd611ddfd7bafc1849f3c4355201 ]
Add a new list to track set transaction and to check for unbound
anonymous sets before entering the commit phase.
Bail out at the end of the transaction handling if an anonymous set
remains unbound.
Fixes: 96518518cc41 ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 628bd3e49cba1c066228e23d71a852c23e26da73 ]
set .destroy callback releases the references to other objects in maps.
This is very late and it results in spurious EBUSY errors. Drop refcount
from the preparation phase instead, update set backend not to drop
reference counter from set .destroy path.
Exceptions: NFT_TRANS_PREPARE_ERROR does not require to drop the
reference counter because the transaction abort path releases the map
references for each element since the set is unbound. The abort path
also deals with releasing reference counter for new elements added to
unbound sets.
Fixes: 591054469b3e ("netfilter: nf_tables: revisit chain/object refcounting from elements")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 26b5a5712eb85e253724e56a54c17f8519bd8e4e ]
Add a new state to deal with rule expressions deactivation from the
newrule error path, otherwise the anonymous set remains in the list in
inactive state for the next generation. Mark the set/chain transaction
as unbound so the abort path releases this object, set it as inactive in
the next generation so it is not reachable anymore from this transaction
and reference counter is dropped.
Fixes: 1240eb93f061 ("netfilter: nf_tables: incorrect error path handling with NFT_MSG_NEWRULE")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4bedf9eee016286c835e3d8fa981ddece5338795 ]
Add bound flag to rule and chain transactions as in 6a0a8d10a366
("netfilter: nf_tables: use-after-free in failing rule with bound set")
to skip them in case that the chain is already bound from the abort
path.
This patch fixes an imbalance in the chain use refcnt that triggers a
WARN_ON on the table and chain destroy path.
This patch also disallows nested chain bindings, which is not
supported from userspace.
The logic to deal with chain binding in nft_data_hold() and
nft_data_release() is not correct. The NFT_TRANS_PREPARE state needs a
special handling in case a chain is bound but next expressions in the
same rule fail to initialize as described by 1240eb93f061 ("netfilter:
nf_tables: incorrect error path handling with NFT_MSG_NEWRULE").
The chain is left bound if rule construction fails, so the objects
stored in this chain (and the chain itself) are released by the
transaction records from the abort path, follow up patch ("netfilter:
nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain")
completes this error handling.
When deleting an existing rule, chain bound flag is set off so the
rule expression .destroy path releases the objects.
Fixes: d0e2c7de92c7 ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b79d7c14f48083abb3fb061370c0c64a569edf4c ]
Since the introduction of the OF bindings, DSA has always had a policy that
in case multiple CPU ports are present in the device tree, the numerically
smallest one is always chosen.
The MT7530 switch family, except the switch on the MT7988 SoC, has 2 CPU
ports, 5 and 6, where port 6 is preferable on the MT7531BE switch because
it has higher bandwidth.
The MT7530 driver developers had 3 options:
- to modify DSA when the MT7531 switch support was introduced, such as to
prefer the better port
- to declare both CPU ports in device trees as CPU ports, and live with the
sub-optimal performance resulting from not preferring the better port
- to declare just port 6 in the device tree as a CPU port
Of course they chose the path of least resistance (3rd option), kicking the
can down the road. The hardware description in the device tree is supposed
to be stable - developers are not supposed to adopt the strategy of
piecemeal hardware description, where the device tree is updated in
lockstep with the features that the kernel currently supports.
Now, as a result of the fact that they did that, any attempts to modify the
device tree and describe both CPU ports as CPU ports would make DSA change
its default selection from port 6 to 5, effectively resulting in a
performance degradation visible to users with the MT7531BE switch as can be
seen below.
Without preferring port 6:
[ ID][Role] Interval Transfer Bitrate Retr
[ 5][TX-C] 0.00-20.00 sec 374 MBytes 157 Mbits/sec 734 sender
[ 5][TX-C] 0.00-20.00 sec 373 MBytes 156 Mbits/sec receiver
[ 7][RX-C] 0.00-20.00 sec 1.81 GBytes 778 Mbits/sec 0 sender
[ 7][RX-C] 0.00-20.00 sec 1.81 GBytes 777 Mbits/sec receiver
With preferring port 6:
[ ID][Role] Interval Transfer Bitrate Retr
[ 5][TX-C] 0.00-20.00 sec 1.99 GBytes 856 Mbits/sec 273 sender
[ 5][TX-C] 0.00-20.00 sec 1.99 GBytes 855 Mbits/sec receiver
[ 7][RX-C] 0.00-20.00 sec 1.72 GBytes 737 Mbits/sec 15 sender
[ 7][RX-C] 0.00-20.00 sec 1.71 GBytes 736 Mbits/sec receiver
Using one port for WAN and the other ports for LAN is a very popular use
case which is what this test emulates.
As such, this change proposes that we retroactively modify stable kernels
(which don't support the modification of the CPU port assignments, so as to
let user space fix the problem and restore the throughput) to keep the
mt7530 driver preferring port 6 even with device trees where the hardware
is more fully described.
Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1f8b6df6a997a430b0c48b504638154b520781ad ]
This change allows inbound traffic through nested IPsec tunnels to
successfully match policies and templates, while retaining the secpath
stack trace as necessary for netfilter policies.
Specifically, this patch marks secpath entries that have already matched
against a relevant policy as having been verified, allowing it to be
treated as optional and skipped after a tunnel decapsulation (during
which the src/dst/proto/etc may have changed, and the correct policy
chain no long be resolvable).
This approach is taken as opposed to the iteration in b0355dbbf13c,
where the secpath was cleared, since that breaks subsequent validations
that rely on the existence of the secpath entries (netfilter policies, or
transport-in-tunnel mode, where policies remain resolvable).
Fixes: b0355dbbf13c ("Fix XFRM-I support for nested ESP tunnels")
Test: Tested against Android Kernel Unit Tests
Test: Tested against Android CTS
Signed-off-by: Benedict Wong <benedictwong@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 76b9bf965c98c9b53ef7420b3b11438dbd764f92 upstream.
neigh_lookup_nodev isn't used in the kernel after removal
of DECnet. So let's remove it.
Fixes: 1202cdd66531 ("Remove DECnet support from kernel")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/eb5656200d7964b2d177a36b77efa3c597d6d72d.1678267343.git.leonro@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 84ad0af0bccd3691cb951c2974c5cb2c10594d4a ]
mini_Qdisc_pair::p_miniq is a double pointer to mini_Qdisc, initialized
in ingress_init() to point to net_device::miniq_ingress. ingress Qdiscs
access this per-net_device pointer in mini_qdisc_pair_swap(). Similar
for clsact Qdiscs and miniq_egress.
Unfortunately, after introducing RTNL-unlocked RTM_{NEW,DEL,GET}TFILTER
requests (thanks Hillf Danton for the hint), when replacing ingress or
clsact Qdiscs, for example, the old Qdisc ("@old") could access the same
miniq_{in,e}gress pointer(s) concurrently with the new Qdisc ("@new"),
causing race conditions [1] including a use-after-free bug in
mini_qdisc_pair_swap() reported by syzbot:
BUG: KASAN: slab-use-after-free in mini_qdisc_pair_swap+0x1c2/0x1f0 net/sched/sch_generic.c:1573
Write of size 8 at addr ffff888045b31308 by task syz-executor690/14901
...
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
print_address_description.constprop.0+0x2c/0x3c0 mm/kasan/report.c:319
print_report mm/kasan/report.c:430 [inline]
kasan_report+0x11c/0x130 mm/kasan/report.c:536
mini_qdisc_pair_swap+0x1c2/0x1f0 net/sched/sch_generic.c:1573
tcf_chain_head_change_item net/sched/cls_api.c:495 [inline]
tcf_chain0_head_change.isra.0+0xb9/0x120 net/sched/cls_api.c:509
tcf_chain_tp_insert net/sched/cls_api.c:1826 [inline]
tcf_chain_tp_insert_unique net/sched/cls_api.c:1875 [inline]
tc_new_tfilter+0x1de6/0x2290 net/sched/cls_api.c:2266
...
@old and @new should not affect each other. In other words, @old should
never modify miniq_{in,e}gress after @new, and @new should not update
@old's RCU state.
Fixing without changing sch_api.c turned out to be difficult (please
refer to Closes: for discussions). Instead, make sure @new's first call
always happen after @old's last call (in {ingress,clsact}_destroy()) has
finished:
In qdisc_graft(), return -EBUSY if @old has any ongoing filter requests,
and call qdisc_destroy() for @old before grafting @new.
Introduce qdisc_refcount_dec_if_one() as the counterpart of
qdisc_refcount_inc_nz() used for filter requests. Introduce a
non-static version of qdisc_destroy() that does a TCQ_F_BUILTIN check,
just like qdisc_put() etc.
Depends on patch "net/sched: Refactor qdisc_graft() for ingress and
clsact Qdiscs".
[1] To illustrate, the syzkaller reproducer adds ingress Qdiscs under
TC_H_ROOT (no longer possible after commit c7cfbd115001 ("net/sched:
sch_ingress: Only create under TC_H_INGRESS")) on eth0 that has 8
transmission queues:
Thread 1 creates ingress Qdisc A (containing mini Qdisc a1 and a2),
then adds a flower filter X to A.
Thread 2 creates another ingress Qdisc B (containing mini Qdisc b1 and
b2) to replace A, then adds a flower filter Y to B.
Thread 1 A's refcnt Thread 2
RTM_NEWQDISC (A, RTNL-locked)
qdisc_create(A) 1
qdisc_graft(A) 9
RTM_NEWTFILTER (X, RTNL-unlocked)
__tcf_qdisc_find(A) 10
tcf_chain0_head_change(A)
mini_qdisc_pair_swap(A) (1st)
|
| RTM_NEWQDISC (B, RTNL-locked)
RCU sync 2 qdisc_graft(B)
| 1 notify_and_destroy(A)
|
tcf_block_release(A) 0 RTM_NEWTFILTER (Y, RTNL-unlocked)
qdisc_destroy(A) tcf_chain0_head_change(B)
tcf_chain0_head_change_cb_del(A) mini_qdisc_pair_swap(B) (2nd)
mini_qdisc_pair_swap(A) (3rd) |
... ...
Here, B calls mini_qdisc_pair_swap(), pointing eth0->miniq_ingress to
its mini Qdisc, b1. Then, A calls mini_qdisc_pair_swap() again during
ingress_destroy(), setting eth0->miniq_ingress to NULL, so ingress
packets on eth0 will not find filter Y in sch_handle_ingress().
This is just one of the possible consequences of concurrently accessing
miniq_{in,e}gress pointers.
Fixes: 7a096d579e8e ("net: sched: ingress: set 'unlocked' flag for Qdisc ops")
Fixes: 87f373921c4e ("net: sched: ingress: set 'unlocked' flag for clsact Qdisc ops")
Reported-by: syzbot+b53a9c0d1ea4ad62da8b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/r/0000000000006cf87705f79acf1a@google.com/
Cc: Hillf Danton <hdanton@sina.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 41f2c7c342d3adb1c4dd5f2e3dd831adff16a669 ]
Currently UNREPLIED and UNASSURED connections are added to the nf flow
table. This causes the following connection packets to be processed
by the flow table which then skips conntrack_in(), and thus such the
connections will remain UNREPLIED and UNASSURED even if reply traffic
is then seen. Even still, the unoffloaded reply packets are the ones
triggering hardware update from new to established state, and if
there aren't any to triger an update and/or previous update was
missed, hardware can get out of sync with sw and still mark
packets as new.
Fix the above by:
1) Not skipping conntrack_in() for UNASSURED packets, but still
refresh for hardware, as before the cited patch.
2) Try and force a refresh by reply-direction packets that update
the hardware rules from new to established state.
3) Remove any bidirectional flows that didn't failed to update in
hardware for re-insertion as bidrectional once any new packet
arrives.
Fixes: 6a9bad0069cf ("net/sched: act_ct: offload UDP NEW connections")
Co-developed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/1686313379-117663-1-git-send-email-paulb@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 212ed75dc5fb9d1423b3942c8f872a868cda3466 ]
The pipapo set backend follows copy-on-update approach, maintaining one
clone of the existing datastructure that is being updated. The clone
and current datastructures are swapped via rcu from the commit step.
The existing integration with the commit protocol is flawed because
there is no operation to clean up the clone if the transaction is
aborted. Moreover, the datastructure swap happens on set element
activation.
This patch adds two new operations for sets: commit and abort, these new
operations are invoked from the commit and abort steps, after the
transactions have been digested, and it updates the pipapo set backend
to use it.
This patch adds a new ->pending_update field to sets to maintain a list
of sets that require this new commit and abort operations.
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit a2ac591cb4d83e1f2d4b4adb3c14b2c79764650a upstream.
Commit 06149746e720 ("Bluetooth: hci_conn: Add support for linking
multiple hcon") reintroduced a previously fixed bug [1] ("KASAN:
slab-use-after-free Read in hci_conn_hash_flush"). This bug was
originally fixed by commit 5dc7d23e167e ("Bluetooth: hci_conn: Fix
possible UAF").
The hci_conn_unlink function was added to avoid invalidating the link
traversal caused by successive hci_conn_del operations releasing extra
connections. However, currently hci_conn_unlink itself also releases
extra connections, resulted in the reintroduced bug.
This patch follows a more robust solution for cleaning up all
connections, by repeatedly removing the first connection until there are
none left. This approach does not rely on the inner workings of
hci_conn_del and ensures proper cleanup of all connections.
Meanwhile, we need to make sure that hci_conn_del never fails. Indeed it
doesn't, as it now always returns zero. To make this a bit clearer, this
patch also changes its return type to void.
Reported-by: syzbot+8bb72f86fc823817bc5d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-bluetooth/000000000000aa920505f60d25ad@google.com/
Fixes: 06149746e720 ("Bluetooth: hci_conn: Add support for linking multiple hcon")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fe2ccc6c29d53e14d3c8b3ddf8ad965a92e074ee upstream.
Since commit ec6cef9cd98d ("Bluetooth: Fix SMP channel registration for
unconfigured controllers") the debugfs interface for unconfigured
controllers will be created when the controller is configured.
There is however currently nothing preventing a controller from being
configured multiple time (e.g. setting the device address using btmgmt)
which results in failed attempts to register the already registered
debugfs entries:
debugfs: File 'features' in directory 'hci0' already present!
debugfs: File 'manufacturer' in directory 'hci0' already present!
debugfs: File 'hci_version' in directory 'hci0' already present!
...
debugfs: File 'quirk_simultaneous_discovery' in directory 'hci0' already present!
Add a controller flag to avoid trying to register the debugfs interface
more than once.
Fixes: ec6cef9cd98d ("Bluetooth: Fix SMP channel registration for unconfigured controllers")
Cc: stable@vger.kernel.org # 4.0
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 886bc7d6ed3357975c5f1d3c784da96000d4bbb4 ]
rtm_tca_policy is used from net/sched/sch_api.c and net/sched/cls_api.c,
thus should be declared in an include file.
This fixes the following sparse warning:
net/sched/sch_api.c:1434:25: warning: symbol 'rtm_tca_policy' was not declared. Should it be static?
Fixes: e331473fee3d ("net/sched: cls_api: add missing validation of netlink attributes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d636fc5dd692c8f4e00ae6e0359c0eceeb5d9bdb ]
syzbot reported a race around qdisc->qdisc_sleeping [1]
It is time we add proper annotations to reads and writes to/from
qdisc->qdisc_sleeping.
[1]
BUG: KCSAN: data-race in dev_graft_qdisc / qdisc_lookup_rcu
read to 0xffff8881286fc618 of 8 bytes by task 6928 on cpu 1:
qdisc_lookup_rcu+0x192/0x2c0 net/sched/sch_api.c:331
__tcf_qdisc_find+0x74/0x3c0 net/sched/cls_api.c:1174
tc_get_tfilter+0x18f/0x990 net/sched/cls_api.c:2547
rtnetlink_rcv_msg+0x7af/0x8c0 net/core/rtnetlink.c:6386
netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2546
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6413
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1913
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0x375/0x4c0 net/socket.c:2503
___sys_sendmsg net/socket.c:2557 [inline]
__sys_sendmsg+0x1e3/0x270 net/socket.c:2586
__do_sys_sendmsg net/socket.c:2595 [inline]
__se_sys_sendmsg net/socket.c:2593 [inline]
__x64_sys_sendmsg+0x46/0x50 net/socket.c:2593
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
write to 0xffff8881286fc618 of 8 bytes by task 6912 on cpu 0:
dev_graft_qdisc+0x4f/0x80 net/sched/sch_generic.c:1115
qdisc_graft+0x7d0/0xb60 net/sched/sch_api.c:1103
tc_modify_qdisc+0x712/0xf10 net/sched/sch_api.c:1693
rtnetlink_rcv_msg+0x807/0x8c0 net/core/rtnetlink.c:6395
netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2546
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6413
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1913
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0x375/0x4c0 net/socket.c:2503
___sys_sendmsg net/socket.c:2557 [inline]
__sys_sendmsg+0x1e3/0x270 net/socket.c:2586
__do_sys_sendmsg net/socket.c:2595 [inline]
__se_sys_sendmsg net/socket.c:2593 [inline]
__x64_sys_sendmsg+0x46/0x50 net/socket.c:2593
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 6912 Comm: syz-executor.5 Not tainted 6.4.0-rc3-syzkaller-00190-g0d85b27b0cc6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/16/2023
Fixes: 3a7d0d07a386 ("net: sched: extend Qdisc with rcu")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Buslov <vladbu@nvidia.com>
Acked-by: Jamal Hadi Salim<jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1e5c647c3f6d4f8497dedcd226204e1880e0ffb3 ]
Add READ_ONCE()/WRITE_ONCE() on accesses to sk->sk_rxhash.
This also prevents a (smart ?) compiler to remove the condition in:
if (sk->sk_rxhash != newval)
sk->sk_rxhash = newval;
We need the condition to avoid dirtying a shared cache line.
Fixes: fec5e652e58f ("rfs: Receive Flow Steering")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a2f4c143d76b1a47c91ef9bc46907116b111da0b ]
A remote DoS vulnerability of RPL Source Routing is assigned CVE-2023-2156.
The Source Routing Header (SRH) has the following format:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Next Header | Hdr Ext Len | Routing Type | Segments Left |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| CmprI | CmprE | Pad | Reserved |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| |
. .
. Addresses[1..n] .
. .
| |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The originator of an SRH places the first hop's IPv6 address in the IPv6
header's IPv6 Destination Address and the second hop's IPv6 address as
the first address in Addresses[1..n].
The CmprI and CmprE fields indicate the number of prefix octets that are
shared with the IPv6 Destination Address. When CmprI or CmprE is not 0,
Addresses[1..n] are compressed as follows:
1..n-1 : (16 - CmprI) bytes
n : (16 - CmprE) bytes
Segments Left indicates the number of route segments remaining. When the
value is not zero, the SRH is forwarded to the next hop. Its address
is extracted from Addresses[n - Segment Left + 1] and swapped with IPv6
Destination Address.
When Segment Left is greater than or equal to 2, the size of SRH is not
changed because Addresses[1..n-1] are decompressed and recompressed with
CmprI.
OTOH, when Segment Left changes from 1 to 0, the new SRH could have a
different size because Addresses[1..n-1] are decompressed with CmprI and
recompressed with CmprE.
Let's say CmprI is 15 and CmprE is 0. When we receive SRH with Segment
Left >= 2, Addresses[1..n-1] have 1 byte for each, and Addresses[n] has
16 bytes. When Segment Left is 1, Addresses[1..n-1] is decompressed to
16 bytes and not recompressed. Finally, the new SRH will need more room
in the header, and the size is (16 - 1) * (n - 1) bytes.
Here the max value of n is 255 as Segment Left is u8, so in the worst case,
we have to allocate 3825 bytes in the skb headroom. However, now we only
allocate a small fixed buffer that is IPV6_RPL_SRH_WORST_SWAP_SIZE (16 + 7
bytes). If the decompressed size overflows the room, skb_push() hits BUG()
below [0].
Instead of allocating the fixed buffer for every packet, let's allocate
enough headroom only when we receive SRH with Segment Left 1.
[0]:
skbuff: skb_under_panic: text:ffffffff81c9f6e2 len:576 put:576 head:ffff8880070b5180 data:ffff8880070b4fb0 tail:0x70 end:0x140 dev:lo
kernel BUG at net/core/skbuff.c:200!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 0 PID: 154 Comm: python3 Not tainted 6.4.0-rc4-00190-gc308e9ec0047 #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:skb_panic (net/core/skbuff.c:200)
Code: 4f 70 50 8b 87 bc 00 00 00 50 8b 87 b8 00 00 00 50 ff b7 c8 00 00 00 4c 8b 8f c0 00 00 00 48 c7 c7 80 6e 77 82 e8 ad 8b 60 ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffc90000003da0 EFLAGS: 00000246
RAX: 0000000000000085 RBX: ffff8880058a6600 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88807dc1c540 RDI: ffff88807dc1c540
RBP: ffffc90000003e48 R08: ffffffff82b392c8 R09: 00000000ffffdfff
R10: ffffffff82a592e0 R11: ffffffff82b092e0 R12: ffff888005b1c800
R13: ffff8880070b51b8 R14: ffff888005b1ca18 R15: ffff8880070b5190
FS: 00007f4539f0b740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055670baf3000 CR3: 0000000005b0e000 CR4: 00000000007506f0
PKRU: 55555554
Call Trace:
<IRQ>
skb_push (net/core/skbuff.c:210)
ipv6_rthdr_rcv (./include/linux/skbuff.h:2880 net/ipv6/exthdrs.c:634 net/ipv6/exthdrs.c:718)
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:437 (discriminator 5))
ip6_input_finish (./include/linux/rcupdate.h:805 net/ipv6/ip6_input.c:483)
__netif_receive_skb_one_core (net/core/dev.c:5494)
process_backlog (./include/linux/rcupdate.h:805 net/core/dev.c:5934)
__napi_poll (net/core/dev.c:6496)
net_rx_action (net/core/dev.c:6565 net/core/dev.c:6696)
__do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:572)
do_softirq (kernel/softirq.c:472 kernel/softirq.c:459)
</IRQ>
<TASK>
__local_bh_enable_ip (kernel/softirq.c:396)
__dev_queue_xmit (net/core/dev.c:4272)
ip6_finish_output2 (./include/net/neighbour.h:544 net/ipv6/ip6_output.c:134)
rawv6_sendmsg (./include/net/dst.h:458 ./include/linux/netfilter.h:303 net/ipv6/raw.c:656 net/ipv6/raw.c:914)
sock_sendmsg (net/socket.c:724 net/socket.c:747)
__sys_sendto (net/socket.c:2144)
__x64_sys_sendto (net/socket.c:2156 net/socket.c:2152 net/socket.c:2152)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
RIP: 0033:0x7f453a138aea
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89
RSP: 002b:00007ffcc212a1c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007ffcc212a288 RCX: 00007f453a138aea
RDX: 0000000000000060 RSI: 00007f4539084c20 RDI: 0000000000000003
RBP: 00007f4538308e80 R08: 00007ffcc212a300 R09: 000000000000001c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007f4539712d1b
</TASK>
Modules linked in:
Fixes: 8610c7c6e3bd ("net: ipv6: add support for rpl sr exthdr")
Reported-by: Max VA
Closes: https://www.interruptlabs.co.uk/articles/linux-ipv6-route-of-death
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230605180617.67284-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 71e9588435c38112d6a8686d3d8e7cc1de8fe22c ]
The order of CIS handle array in Set CIG Parameters response shall match
the order of the CIS_ID array in the command (Core v5.3 Vol 4 Part E Sec
7.8.97). We send CIS_IDs mainly in the order of increasing CIS_ID (but
with "last" CIS first if it has fixed CIG_ID). In handling of the
reply, we currently assume this is also the same as the order of
hci_conn in hdev->conn_hash, but that is not true.
Match the correct hci_conn to the correct handle by matching them based
on the CIG+CIS combination. The CIG+CIS combination shall be unique for
ISO_LINK hci_conn at state >= BT_BOUND, which we maintain in
hci_le_set_cig_params.
Fixes: 26afbd826ee3 ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c14516faede33c2c31da45cf950d55dbff42962e ]
This fixes only matching CIS by address which prevents creating new hcon
if upper layer is requesting a specific CIS ID.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 71e9588435c3 ("Bluetooth: ISO: use correct CIS order in Set CIG Parameters event")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 06149746e7203d5ffe2d6faf9799ee36203aa8b8 ]
Since it is required for some configurations to have multiple CIS with
the same peer which is now covered by iso-tester in the following test
cases:
ISO AC 6(i) - Success
ISO AC 7(i) - Success
ISO AC 8(i) - Success
ISO AC 9(i) - Success
ISO AC 11(i) - Success
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 71e9588435c3 ("Bluetooth: ISO: use correct CIS order in Set CIG Parameters event")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1857c19941c87eb36ad47f22a406be5dfe5eff9f ]
When the HCI_UNREGISTER flag is set, no jobs should be scheduled. Fix
potential race when HCI_UNREGISTER is set after the flag is tested in
hci_cmd_sync_queue.
Fixes: 0b94f2651f56 ("Bluetooth: hci_sync: Fix queuing commands when HCI_UNREGISTER is set")
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0fe8c8d071343fa9278980ce4b6f8e6ea24a2ed1 ]
Split bt_iso_qos into dedicated unicast and broadcast
structures and add additional broadcast parameters.
Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Stable-dep-of: 31c5f9164949 ("Bluetooth: ISO: consider right CIS when removing CIG at cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit edf2e1d2019b2730d6076dbe4c040d37d7c10bbe ]
skip_notify_on_dev_down ctl table expects this field
to be an int (4 bytes), not a bool (1 byte).
Because proc_dou8vec_minmax() was added in 5.13,
this patch converts skip_notify_on_dev_down to an int.
Following patch then converts the field to u8 and use proc_dou8vec_minmax().
Fixes: 7c6bb7d2faaf ("net/ipv6: Add knob to skip DELROUTE message on device down")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e209fee4118fe9a449d4d805361eb2de6796be39 ]
With this commit, all the GIDs ("0 4294967294") can be written to the
"net.ipv4.ping_group_range" sysctl.
Note that 4294967295 (0xffffffff) is an invalid GID (see gid_valid() in
include/linux/uidgid.h), and an attempt to register this number will cause
-EINVAL.
Prior to this commit, only up to GID 2147483647 could be covered.
Documentation/networking/ip-sysctl.rst had "0 4294967295" as an example
value, but this example was wrong and causing -EINVAL.
Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind")
Co-developed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ed779fe4c9b5a20b4ab4fd6f3e19807445bb78c7 ]
After the blamed commit, the member key is longer 4-byte aligned. On
platforms that do not support unaligned access, e.g., MIPS32R2 with
unaligned_action set to 1, this will trigger a crash when accessing
an IPv6 pneigh_entry, as the key is cast to an in6_addr pointer.
Change the type of the key to u32 to make it aligned.
Fixes: 62dd93181aaa ("[IPV6] NDISC: Set per-entry is_router flag in Proxy NA.")
Signed-off-by: Qingfang DENG <qingfang.deng@siflower.com.cn>
Link: https://lore.kernel.org/r/20230601015432.159066-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 30c6f0bf9579debce27e45fac34fdc97e46acacc ]
In this patch, we mainly try to handle sending a compressed ack
correctly if it's deferred.
Here are more details in the old logic:
When sack compression is triggered in the tcp_compressed_ack_kick(),
if the sock is owned by user, it will set TCP_DELACK_TIMER_DEFERRED
and then defer to the release cb phrase. Later once user releases
the sock, tcp_delack_timer_handler() should send a ack as expected,
which, however, cannot happen due to lack of ICSK_ACK_TIMER flag.
Therefore, the receiver would not sent an ack until the sender's
retransmission timeout. It definitely increases unnecessary latency.
Fixes: 5d9f4262b7ea ("tcp: add SACK compression")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: fuyuanli <fuyuanli@didiglobal.com>
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://lore.kernel.org/netdev/20230529113804.GA20300@didi-ThinkCentre-M920t-N000/
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230531080150.GA20424@didi-ThinkCentre-M920t-N000
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4faeee0cf8a5d88d63cdbc3bab124fb0e6aed08c ]
Historically connect(AF_UNSPEC) has been abused by syzkaller
and other fuzzers to trigger various bugs.
A recent one triggers a divide-by-zero [1], and Paolo Abeni
was able to diagnose the issue.
tcp_recvmsg_locked() has tests about sk_state being not TCP_LISTEN
and TCP REPAIR mode being not used.
Then later if socket lock is released in sk_wait_data(),
another thread can call connect(AF_UNSPEC), then make this
socket a TCP listener.
When recvmsg() is resumed, it can eventually call tcp_cleanup_rbuf()
and attempt a divide by 0 in tcp_rcv_space_adjust() [1]
This patch adds a new socket field, counting number of threads
blocked in sk_wait_event() and inet_wait_for_connect().
If this counter is not zero, tcp_disconnect() returns an error.
This patch adds code in blocking socket system calls, thus should
not hurt performance of non blocking ones.
Note that we probably could revert commit 499350a5a6e7 ("tcp:
initialize rcv_mss to TCP_MIN_MSS instead of 0") to restore
original tcpi_rcv_mss meaning (was 0 if no payload was ever
received on a socket)
[1]
divide error: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 13832 Comm: syz-executor.5 Not tainted 6.3.0-rc4-syzkaller-00224-g00c7b5f4ddc5 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
RIP: 0010:tcp_rcv_space_adjust+0x36e/0x9d0 net/ipv4/tcp_input.c:740
Code: 00 00 00 00 fc ff df 4c 89 64 24 48 8b 44 24 04 44 89 f9 41 81 c7 80 03 00 00 c1 e1 04 44 29 f0 48 63 c9 48 01 e9 48 0f af c1 <49> f7 f6 48 8d 04 41 48 89 44 24 40 48 8b 44 24 30 48 c1 e8 03 48
RSP: 0018:ffffc900033af660 EFLAGS: 00010206
RAX: 4a66b76cbade2c48 RBX: ffff888076640cc0 RCX: 00000000c334e4ac
RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000001
RBP: 00000000c324e86c R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880766417f8
R13: ffff888028fbb980 R14: 0000000000000000 R15: 0000000000010344
FS: 00007f5bffbfe700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32f25000 CR3: 000000007ced0000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
tcp_recvmsg_locked+0x100e/0x22e0 net/ipv4/tcp.c:2616
tcp_recvmsg+0x117/0x620 net/ipv4/tcp.c:2681
inet6_recvmsg+0x114/0x640 net/ipv6/af_inet6.c:670
sock_recvmsg_nosec net/socket.c:1017 [inline]
sock_recvmsg+0xe2/0x160 net/socket.c:1038
____sys_recvmsg+0x210/0x5a0 net/socket.c:2720
___sys_recvmsg+0xf2/0x180 net/socket.c:2762
do_recvmmsg+0x25e/0x6e0 net/socket.c:2856
__sys_recvmmsg net/socket.c:2935 [inline]
__do_sys_recvmmsg net/socket.c:2958 [inline]
__se_sys_recvmmsg net/socket.c:2951 [inline]
__x64_sys_recvmmsg+0x20f/0x260 net/socket.c:2951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f5c0108c0f9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f5bffbfe168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00007f5c011ac050 RCX: 00007f5c0108c0f9
RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000003
RBP: 00007f5c010e7b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f5c012cfb1f R14: 00007f5bffbfe300 R15: 0000000000022000
</TASK>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Paolo Abeni <pabeni@redhat.com>
Diagnosed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20230526163458.2880232-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e5c6de5fa025882babf89cecbed80acf49b987fa ]
The read_skb() logic is incrementing the tcp->copied_seq which is used for
among other things calculating how many outstanding bytes can be read by
the application. This results in application errors, if the application
does an ioctl(FIONREAD) we return zero because this is calculated from
the copied_seq value.
To fix this we move tcp->copied_seq accounting into the recv handler so
that we update these when the recvmsg() hook is called and data is in
fact copied into user buffers. This gives an accurate FIONREAD value
as expected and improves ACK handling. Before we were calling the
tcp_rcv_space_adjust() which would update 'number of bytes copied to
user in last RTT' which is wrong for programs returning SK_PASS. The
bytes are only copied to the user when recvmsg is handled.
Doing the fix for recvmsg is straightforward, but fixing redirect and
SK_DROP pkts is a bit tricker. Build a tcp_psock_eat() helper and then
call this from skmsg handlers. This fixes another issue where a broken
socket with a BPF program doing a resubmit could hang the receiver. This
happened because although read_skb() consumed the skb through sock_drop()
it did not update the copied_seq. Now if a single reccv socket is
redirecting to many sockets (for example for lb) the receiver sk will be
hung even though we might expect it to continue. The hang comes from
not updating the copied_seq numbers and memory pressure resulting from
that.
We have a slight layer problem of calling tcp_eat_skb even if its not
a TCP socket. To fix we could refactor and create per type receiver
handlers. I decided this is more work than we want in the fix and we
already have some small tweaks depending on caller that use the
helper skb_bpf_strparser(). So we extend that a bit and always set
the strparser bit when it is in use and then we can gate the
seq_copied updates on this.
Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230523025618.113937-9-john.fastabend@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit eca9bfafee3a0487e59c59201ae14c7594ba940a ]
When receive buffer is small we try to copy out the data from
TCP into a skb maintained by TLS to prevent connection from
stalling. Unfortunately if a single record is made up of a mix
of decrypted and non-decrypted skbs combining them into a single
skb leads to loss of decryption status, resulting in decryption
errors or data corruption.
Similarly when trying to use TCP receive queue directly we need
to make sure that all the skbs within the record have the same
status. If we don't the mixed status will be detected correctly
but we'll CoW the anchor, again collapsing it into a single paged
skb without decrypted status preserved. So the "fixup" code will
not know which parts of skb to re-encrypt.
Fixes: 84c61fe1a75b ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 368d3cb406cdd074d1df2ad9ec06d1bfcb664882 upstream.
page_pool_ring_[un]lock() use in_softirq() to decide which
spin lock variant to use, and when they are called in the
context with in_softirq() being false, spin_lock_bh() is
called in page_pool_ring_lock() while spin_unlock() is
called in page_pool_ring_unlock(), because spin_lock_bh()
has disabled the softirq in page_pool_ring_lock(), which
causes inconsistency for spin lock pair calling.
This patch fixes it by returning in_softirq state from
page_pool_producer_lock(), and use it to decide which
spin lock variant to use in page_pool_producer_unlock().
As pool->ring has both producer and consumer lock, so
rename it to page_pool_producer_[un]lock() to reflect
the actual usage. Also move them to page_pool.c as they
are only used there, and remove the 'inline' as the
compiler may have better idea to do inlining or not.
Fixes: 7886244736a4 ("net: page_pool: Add bulk support for ptr_ring")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/20230522031714.5089-1-linyunsheng@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ae9b15fbe63447bc1d3bba3769f409d17ca6fdf6 upstream.
When the virtual interface's feature is updated, it synchronizes the
updated feature for its own lower interface.
This propagation logic should be worked as the iteration, not recursively.
But it works recursively due to the netdev notification unexpectedly.
This problem occurs when it disables LRO only for the team and bonding
interface type.
team0
|
+------+------+-----+-----+
| | | | |
team1 team2 team3 ... team200
If team0's LRO feature is updated, it generates the NETDEV_FEAT_CHANGE
event to its own lower interfaces(team1 ~ team200).
It is worked by netdev_sync_lower_features().
So, the NETDEV_FEAT_CHANGE notification logic of each lower interface
work iteratively.
But generated NETDEV_FEAT_CHANGE event is also sent to the upper
interface too.
upper interface(team0) generates the NETDEV_FEAT_CHANGE event for its own
lower interfaces again.
lower and upper interfaces receive this event and generate this
event again and again.
So, the stack overflow occurs.
But it is not the infinite loop issue.
Because the netdev_sync_lower_features() updates features before
generating the NETDEV_FEAT_CHANGE event.
Already synchronized lower interfaces skip notification logic.
So, it is just the problem that iteration logic is changed to the
recursive unexpectedly due to the notification mechanism.
Reproducer:
ip link add team0 type team
ethtool -K team0 lro on
for i in {1..200}
do
ip link add team$i master team0 type team
ethtool -K team$i lro on
done
ethtool -K team0 lro off
In order to fix it, the notifier_ctx member of bonding/team is introduced.
Reported-by: syzbot+60748c96cf5c6df8e581@syzkaller.appspotmail.com
Fixes: fd867d51f889 ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230517143010.3596250-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3632679d9e4f879f49949bb5b050e0de553e4739 upstream.
With a raw socket bound to IPPROTO_RAW (ie with hdrincl enabled), the
protocol field of the flow structure, build by raw_sendmsg() /
rawv6_sendmsg()), is set to IPPROTO_RAW. This breaks the ipsec policy
lookup when some policies are defined with a protocol in the selector.
For ipv6, the sin6_port field from 'struct sockaddr_in6' could be used to
specify the protocol. Just accept all values for IPPROTO_RAW socket.
For ipv4, the sin_port field of 'struct sockaddr_in' could not be used
without breaking backward compatibility (the value of this field was never
checked). Let's add a new kind of control message, so that the userland
could specify which protocol is used.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20230522120820.1319391-1-nicolas.dichtel@6wind.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 91b6d02ddcd113352bdd895990b252065c596de7 ]
The ATS2851 based controller advertises support for command "LE Set Random
Private Address Timeout" but does not actually implement it, impeding the
controller initialization.
Add the quirk HCI_QUIRK_BROKEN_SET_RPA_TIMEOUT to unblock the controller
initialization.
< HCI Command: LE Set Resolvable Private... (0x08|0x002e) plen 2
Timeout: 900 seconds
> HCI Event: Command Status (0x0f) plen 4
LE Set Resolvable Private Address Timeout (0x08|0x002e) ncmd 1
Status: Unknown HCI Command (0x01)
Co-developed-by: imoc <wzj9912@gmail.com>
Signed-off-by: imoc <wzj9912@gmail.com>
Signed-off-by: Raul Cheleguini <raul.cheleguini@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8194f1ef5a815aea815a91daf2c721eab2674f1f ]
Some adapters (e.g. RTL8723CS) advertise that they have more than
2 pages for local ext features, but they don't support any features
declared in these pages. RTL8723CS reports max_page = 2 and declares
support for sync train and secure connection, but it responds with
either garbage or with error in status on corresponding commands.
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Bastian Germann <bage@debian.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e3478c68f6704638d08f437cbc552ca5970c151a ]
In ip_vs_sync_conn_v0() copy is made to struct ip_vs_sync_conn_options.
That structure looks like this:
struct ip_vs_sync_conn_options {
struct ip_vs_seq in_seq;
struct ip_vs_seq out_seq;
};
The source of the copy is the in_seq field of struct ip_vs_conn. Whose
type is struct ip_vs_seq. Thus we can see that the source - is not as
wide as the amount of data copied, which is the width of struct
ip_vs_sync_conn_option.
The copy is safe because the next field in is another struct ip_vs_seq.
Make use of struct_group() to annotate this.
Flagged by gcc-13 as:
In file included from ./include/linux/string.h:254,
from ./include/linux/bitmap.h:11,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/paravirt.h:17,
from ./arch/x86/include/asm/cpuid.h:62,
from ./arch/x86/include/asm/processor.h:19,
from ./arch/x86/include/asm/timex.h:5,
from ./include/linux/timex.h:67,
from ./include/linux/time32.h:13,
from ./include/linux/time.h:60,
from ./include/linux/stat.h:19,
from ./include/linux/module.h:13,
from net/netfilter/ipvs/ip_vs_sync.c:38:
In function 'fortify_memcpy_chk',
inlined from 'ip_vs_sync_conn_v0' at net/netfilter/ipvs/ip_vs_sync.c:606:3:
./include/linux/fortify-string.h:529:25: error: call to '__read_overflow2_field' declared with attribute warning: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror=attribute-warning]
529 | __read_overflow2_field(q_size_field, size);
|
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c54876cd5961ce0f8e74807f79a6739cd6b35ddf ]
With the multiplexed ndo_setup_tc() model which lacks a first-class
struct netlink_ext_ack * argument, the only way to pass the netlink
extended ACK message down to the device driver is to embed it within the
offload structure.
Do this for struct tc_mqprio_qopt_offload and struct tc_taprio_qopt_offload.
Since struct tc_taprio_qopt_offload also contains a tc_mqprio_qopt_offload
structure, and since device drivers might effectively reuse their mqprio
implementation for the mqprio portion of taprio, we make taprio set the
extack in both offload structures to point at the same netlink extack
message.
In fact, the taprio handling is a bit more tricky, for 2 reasons.
First is because the offload structure has a longer lifetime than the
extack structure. The driver is supposed to populate the extack
synchronously from ndo_setup_tc() and leave it alone afterwards.
To not have any use-after-free surprises, we zero out the extack pointer
when we leave taprio_enable_offload().
The second reason is because taprio does overwrite the extack message on
ndo_setup_tc() error. We need to switch to the weak form of setting an
extack message, which preserves a potential message set by the driver.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9949e2efb54eb3001cb2f6512ff3166dddbfb75d ]
Bonding send_peer_notif was defined as u8. Since commit 07a4ddec3ce9
("bonding: add an option to specify a delay between peer notifications").
the bond->send_peer_notif will be num_peer_notif multiplied by
peer_notif_delay, which is u8 * u32. This would cause the send_peer_notif
overflow easily. e.g.
ip link add bond0 type bond mode 1 miimon 100 num_grat_arp 30 peer_notify_delay 1000
To fix the overflow, let's set the send_peer_notif to u32 and limit
peer_notif_delay to 300s.
Reported-by: Liang Li <liali@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2090053
Fixes: 07a4ddec3ce9 ("bonding: add an option to specify a delay between peer notifications")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dfd9248c071a3710c24365897459538551cb7167 ]
KCSAN found a data race in sock_recv_cmsgs() where the read access
to sk->sk_stamp needs READ_ONCE().
BUG: KCSAN: data-race in packet_recvmsg / packet_recvmsg
write (marked) to 0xffff88803c81f258 of 8 bytes by task 19171 on cpu 0:
sock_write_timestamp include/net/sock.h:2670 [inline]
sock_recv_cmsgs include/net/sock.h:2722 [inline]
packet_recvmsg+0xb97/0xd00 net/packet/af_packet.c:3489
sock_recvmsg_nosec net/socket.c:1019 [inline]
sock_recvmsg+0x11a/0x130 net/socket.c:1040
sock_read_iter+0x176/0x220 net/socket.c:1118
call_read_iter include/linux/fs.h:1845 [inline]
new_sync_read fs/read_write.c:389 [inline]
vfs_read+0x5e0/0x630 fs/read_write.c:470
ksys_read+0x163/0x1a0 fs/read_write.c:613
__do_sys_read fs/read_write.c:623 [inline]
__se_sys_read fs/read_write.c:621 [inline]
__x64_sys_read+0x41/0x50 fs/read_write.c:621
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
read to 0xffff88803c81f258 of 8 bytes by task 19183 on cpu 1:
sock_recv_cmsgs include/net/sock.h:2721 [inline]
packet_recvmsg+0xb64/0xd00 net/packet/af_packet.c:3489
sock_recvmsg_nosec net/socket.c:1019 [inline]
sock_recvmsg+0x11a/0x130 net/socket.c:1040
sock_read_iter+0x176/0x220 net/socket.c:1118
call_read_iter include/linux/fs.h:1845 [inline]
new_sync_read fs/read_write.c:389 [inline]
vfs_read+0x5e0/0x630 fs/read_write.c:470
ksys_read+0x163/0x1a0 fs/read_write.c:613
__do_sys_read fs/read_write.c:623 [inline]
__se_sys_read fs/read_write.c:621 [inline]
__x64_sys_read+0x41/0x50 fs/read_write.c:621
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
value changed: 0xffffffffc4653600 -> 0x0000000000000000
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 19183 Comm: syz-executor.5 Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Fixes: 6c7c98bad488 ("sock: avoid dirtying sk_stamp, if possible")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230508175543.55756-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b9703ed44ffbfba85c103b9de01886a225e14b38 ]
This patch allows users to add devices to an existing netdev chain.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: 8509f62b0b07 ("netfilter: nf_tables: hit ENOENT on unexisting chain/flowtable update with missing attributes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit db099c625b13a74d462521a46d98a8ce5b53af5d ]
afs_make_call() calls rxrpc_kernel_begin_call() to begin a call (which may
get stalled in the background waiting for a connection to become
available); it then calls rxrpc_kernel_set_max_life() to set the timeouts -
but that starts the call timer so the call timer might then expire before
we get a connection assigned - leading to the following oops if the call
stalled:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
CPU: 1 PID: 5111 Comm: krxrpcio/0 Not tainted 6.3.0-rc7-build3+ #701
RIP: 0010:rxrpc_alloc_txbuf+0xc0/0x157
...
Call Trace:
<TASK>
rxrpc_send_ACK+0x50/0x13b
rxrpc_input_call_event+0x16a/0x67d
rxrpc_io_thread+0x1b6/0x45f
? _raw_spin_unlock_irqrestore+0x1f/0x35
? rxrpc_input_packet+0x519/0x519
kthread+0xe7/0xef
? kthread_complete_and_exit+0x1b/0x1b
ret_from_fork+0x22/0x30
Fix this by noting the timeouts in struct rxrpc_call when the call is
created. The timer will be started when the first packet is transmitted.
It shouldn't be possible to trigger this directly from userspace through
AF_RXRPC as sendmsg() will return EBUSY if the call is in the
waiting-for-conn state if it dropped out of the wait due to a signal.
Fixes: 9d35d880e0e4 ("rxrpc: Move client call connection to the I/O thread")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit c1592a89942e9678f7d9c8030efa777c0d57edab upstream.
Toggle deleted anonymous sets as inactive in the next generation, so
users cannot perform any update on it. Clear the generation bitmask
in case the transaction is aborted.
The following KASAN splat shows a set element deletion for a bound
anonymous set that has been already removed in the same transaction.
[ 64.921510] ==================================================================
[ 64.923123] BUG: KASAN: wild-memory-access in nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.924745] Write of size 8 at addr dead000000000122 by task test/890
[ 64.927903] CPU: 3 PID: 890 Comm: test Not tainted 6.3.0+ #253
[ 64.931120] Call Trace:
[ 64.932699] <TASK>
[ 64.934292] dump_stack_lvl+0x33/0x50
[ 64.935908] ? nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.937551] kasan_report+0xda/0x120
[ 64.939186] ? nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.940814] nf_tables_commit+0xa24/0x1490 [nf_tables]
[ 64.942452] ? __kasan_slab_alloc+0x2d/0x60
[ 64.944070] ? nf_tables_setelem_notify+0x190/0x190 [nf_tables]
[ 64.945710] ? kasan_set_track+0x21/0x30
[ 64.947323] nfnetlink_rcv_batch+0x709/0xd90 [nfnetlink]
[ 64.948898] ? nfnetlink_rcv_msg+0x480/0x480 [nfnetlink]
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 73db1b8f2bb6725b7391e85aab41fdf592b3c0c1 ]
(struct nf_conn)->timeout is an interval before the conntrack
confirmed. After confirmed, it becomes a timestamp.
It is observed that timeout of an unconfirmed conntrack:
- Set by calling ctnetlink_change_timeout(). As a result,
`nfct_time_stamp` was wrongly added to `ct->timeout` twice.
- Get by calling ctnetlink_dump_timeout(). As a result,
`nfct_time_stamp` was wrongly subtracted.
Call Trace:
<TASK>
dump_stack_lvl
ctnetlink_dump_timeout
__ctnetlink_glue_build
ctnetlink_glue_build
__nfqnl_enqueue_packet
nf_queue
nf_hook_slow
ip_mc_output
? __pfx_ip_finish_output
ip_send_skb
? __pfx_dst_output
udp_send_skb
udp_sendmsg
? __pfx_ip_generic_getfrag
sock_sendmsg
Separate the 2 cases in:
- Setting `ct->timeout` in __nf_ct_set_timeout().
- Getting `ct->timeout` in ctnetlink_dump_timeout().
Pablo appends:
Update ctnetlink to set up the timeout _after_ the IPS_CONFIRMED flag is
set on, otherwise conntrack creation via ctnetlink breaks.
Note that the problem described in this patch occurs since the
introduction of the nfnetlink_queue conntrack support, select a
sufficiently old Fixes: tag for -stable kernel to pick up this fix.
Fixes: a4b4766c3ceb ("netfilter: nfnetlink_queue: rename related to nfqueue attaching conntrack info")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d769ccaf957fe7391f357c0a923de71f594b8a2b ]
Make sure unaligned descriptors that straddle the end of the UMEM are
considered invalid. Currently, descriptor validation is broken for
zero-copy mode which only checks descriptors at page granularity.
For example, descriptors in zero-copy mode that overrun the end of the
UMEM but not a page boundary are (incorrectly) considered valid. The
UMEM boundary check needs to happen before the page boundary and
contiguity checks in xp_desc_crosses_non_contig_pg(). Do this check in
xp_unaligned_validate_desc() instead like xp_check_unaligned() already
does.
Fixes: 2b43470add8c ("xsk: Introduce AF_XDP buffer allocation API")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230405235920.7305-2-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a02d83f9947d8f71904eda4de046630c3eb6802c ]
Currently, kernel would set MSG_CTRUNC flag if msg_control buffer
wasn't provided and SO_PASSCRED was set or if there was pending SCM_RIGHTS.
For some reason we have no corresponding check for SO_PASSSEC.
In the recvmsg(2) doc we have:
MSG_CTRUNC
indicates that some control data was discarded due to lack
of space in the buffer for ancillary data.
So, we need to set MSG_CTRUNC flag for all types of SCM.
This change can break applications those don't check MSG_CTRUNC flag.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Leon Romanovsky <leon@kernel.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
v2:
- commit message was rewritten according to Eric's suggestion
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Unbreak br_netfilter physdev match support, from Florian Westphal.
2) Use GFP_KERNEL_ACCOUNT for stateful/policy objects, from Chen Aotian.
3) Use IS_ENABLED() in nf_reset_trace(), from Florian Westphal.
4) Fix validation of catch-all set element.
5) Tighten requirements for catch-all set elements.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: tighten netlink attribute requirements for catch-all elements
netfilter: nf_tables: validate catch-all set elements
netfilter: nf_tables: fix ifdef to also consider nf_tables=m
netfilter: nf_tables: Modify nla_memdup's flag to GFP_KERNEL_ACCOUNT
netfilter: br_netfilter: fix recent physdev match breakage
====================
Link: https://lore.kernel.org/r/20230418145048.67270-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
catch-all set element might jump/goto to chain that uses expressions
that require validation.
Fixes: aaa31047a6d2 ("netfilter: nftables: add catch-all set element support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type
via mapping table.
The mlx5 hardware can also identify and RSS hash IPSEC. This indicate
hash includes SPI (Security Parameters Index) as part of IPSEC hash.
Extend xdp core enum xdp_rss_hash_type with IPSEC hash type.
Fixes: bc8d405b1ba9 ("net/mlx5e: Support RX XDP metadata")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132892548.340624.11185734579430124869.stgit@firesoul
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The RSS hash type specifies what portion of packet data NIC hardware used
when calculating RSS hash value. The RSS types are focused on Internet
traffic protocols at OSI layers L3 and L4. L2 (e.g. ARP) often get hash
value zero and no RSS type. For L3 focused on IPv4 vs. IPv6, and L4
primarily TCP vs UDP, but some hardware supports SCTP.
Hardware RSS types are differently encoded for each hardware NIC. Most
hardware represent RSS hash type as a number. Determining L3 vs L4 often
requires a mapping table as there often isn't a pattern or sorting
according to ISO layer.
The patch introduce a XDP RSS hash type (enum xdp_rss_hash_type) that
contains both BITs for the L3/L4 types, and combinations to be used by
drivers for their mapping tables. The enum xdp_rss_type_bits get exposed
to BPF via BTF, and it is up to the BPF-programmer to match using these
defines.
This proposal change the kfunc API bpf_xdp_metadata_rx_hash() adding
a pointer value argument for provide the RSS hash type.
Change signature for all xmo_rx_hash calls in drivers to make it compile.
The RSS type implementations for each driver comes as separate patches.
Fixes: 3d76a4d3d4e5 ("bpf: XDP metadata RX kfuncs")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132892042.340624.582563003880565460.stgit@firesoul
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
