| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground into gpio/for-next
gpio: legacy interface cleanups for 7.3
These are the remaining patches for legacy gpio interface
cleanup, ensuring that files referencing them are sure to
have CONFIG_GPIOLIB_LEGACY set, and use linux/gpio/legacy.h
instead of the old linux/gpio.h header.
There are a few more patches already merged in other
branches for 7.3, including soc, led, net and media. Once
everything is in, we can apply the final patches to turn
off CONFIG_GPIOLIB_LEGACY by default and remove the obsolete
header file.
This branch is based on the immutable ib-mfd-legacy-gpio-7.3
branch from mfd.git to avoid a conflict in the rohm drivers.
|
|
We need the serial driver fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
New HW no longer implements a separate class for latency-sensitive QPs
and advertises this by a new cap bit.
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Introduce the qp_latency_sensitive_disable capability bit to indicate
that the device no longer implements a separate class for
latency-sensitive QPs, so drivers can stop programming the
latency_sensitive QPC field and skip allocating the dedicated
fast-path bfreg on such HW.
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/20260726-deprecate-lat-qps-v2-1-5e0c2ee55046@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Unlike local reenqueues, cap rejections have no repeat limit. A
malfunctioning scheduler can keep re-inserting a task to a cid it lacks caps
on, cycling the task through reject and reenqueue. This was assumed safe
because a task that never runs trips the stall watchdog. However, the
reenqueue irq_work re-arms itself and outranks the timer vector, blocking
everything else on the CPU including stall detection and recovery, until the
NMI hardlockup detector fires.
Local reenqueues already have a repeat cap, SCX_REENQ_LOCAL_MAX_REPEAT,
which needs generalizing to cover all reenqueues. It also has an attribution
problem. Counted per-cpu on root, it tears down the whole hierarchy even
when a sub-scheduler caused the repeated reenqueues.
Generalize by bounding every reenqueue with one per-task counter. reenq_cnt
is bumped in scx_do_enqueue_task() on each SCX_ENQ_REENQ, the single path
every reenqueue producer passes through, and cleared in clr_task_runnable()
when the task is picked to run and in scx_disable_task() when it leaves the
scheduler's control. Past SCX_REENQ_MAX_REPEAT the task's owning scheduler
is ejected with a new SCX_EXIT_ERROR_REENQ and the task is left stranded to
be picked up during sched exit.
The SCX_EV_REENQ_LOCAL_REPEAT event becomes SCX_EV_REENQ_REPEAT, counting
repeat reenqueues from all sources.
v2: Count SCX_EV_REENQ_REPEAT only when a reenqueue leads to another
reenqueue, not on every reenqueue.
v3: - Also clear reenq_cnt in scx_disable_task() so that the count doesn't
carry over to the next owner across sched class switches, scheduler
replacement or sub-scheduler rehoming (Andrea Righi).
- Update the stale SCX_EV_REENQ_LOCAL_REPEAT references in sched-ext.rst
(Andrea Righi).
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- vfs: Preserve the ACL_DONT_CACHE state in forget_cached_acl().
ACL_DONT_CACHE is meant to be a permanent opt-out from ACL caching
which FUSE relies on for servers that don't negotiate FUSE_POSIX_ACL.
The helper replaced it with ACL_NOT_CACHED, silently re-enabling the
cache, and as fuse doesn't invalidate the cache for such servers a
properly timed get_acl() returned stale ACLs. Comes with a fuse
selftest reproducing this.
- pidfs:
- Preserve PIDFD_THREAD when a thread pidfd is reopened via
open_by_handle_at(). PIDFD_THREAD shares the O_EXCL bit which
do_dentry_open() strips after the flags have been validated, so
the reopened pidfd silently became a process pidfd. Comes with a
selftest.
- Add a pidfs_dentry_open() helper so the regular pidfd allocation
path and the file handle path share the code that forces O_RDWR
and reapplies the pidfd flags that do_dentry_open() strips.
- Handle FS_IOC32_GETVERSION in the compat ioctl path.
- Make pidfs_ino_lock static.
- iomap:
- Fix the block range calculation in ifs_clear_range_dirty() so a
partial clear doesn't drop the dirty state of blocks the range
only partially covers.
- Support invalidating partial folios so a partial truncate or hole
punch with blocksize < foliosize doesn't leave stale dirty bits
behind.
- Only set did_zero when iomap_zero_iter() actually zeroed
something.
- Guard ifs_set_range_dirty() and ifs_set_range_uptodate() against
zero-length ranges where the unsigned last-block calculation
underflows and bitmap_set() writes far beyond the ifs->state
allocation.
- Don't merge ioends with different io_private values as the merge
could leak or corrupt the private data of the individual ioends.
- exec:
- Raise bprm->have_execfd only once the binfmt_misc interpreter has
actually been opened. The flag was set as soon as a matching 'O'
or 'C' entry was found. If the interpreter open failed with
ENOEXEC the exec fell through to the next binary format with
have_execfd raised but no executable staged and begin_new_exec()
NULL derefed past the point of no return.
- Fix an unsigned loop counter wrap in transfer_args_to_stack() on
nommu. An overlong argument or environment string pushes bprm->p
below PAGE_SIZE, the stop index becomes zero, and the loop never
terminates, wrapping its counter and copying garbage from in
front of the page array into the new process stack.
- Make binfmt_elf_fdpic only honour the first PT_INTERP like
binfmt_elf does. Each additional PT_INTERP overwrote the previous
interpreter, leaking the name allocation and the interpreter file
reference together with the write denial open_exec() took,
leaving the file unwritable for as long as the system runs.
- overlayfs:
- Compare the full escaped xattr prefix including the trailing dot.
An xattr like "trusted.overlay.overlayfoo" was misclassified as
an escaped overlay xattr.
- Check read access to the copy_file_range() source with the
source's mounter credentials.
- super: Thawing a filesystem whose block device was frozen with
bdev_freeze() deadlocked. Dropping the last block layer freeze
reference from under s_umount ends up in fs_bdev_thaw() which
reacquires s_umount on the same task. Pin the superblock with an
active reference instead and call bdev_thaw() without holding
s_umount.
- procfs: Return EACCES instead of success when the ptrace access check
for namespace links fails.
- afs: Use afs_dir_get_block() rather than afs_dir_find_block() for
block 0 in afs_edit_dir_remove(), matching afs_edit_dir_add().
- Push the memcg gating of ->nr_cached_objects() down into the btrfs
and shmem callbacks instead of skipping every callback during
non-root memcg reclaim. The blanket check short-circuited XFS whose
inode reclaim hook is intentionally driven from per-memcg contexts to
free memcg-charged slab.
- eventpoll: Pin files while checking reverse paths.
Since struct file became SLAB_TYPESAFE_BY_RCU a concurrent close
could free and recycle the file under the check which then took and
dropped the f_lock of whatever live file now occupies that slot.
* tag 'vfs-7.2-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (24 commits)
super: fix emergency thaw deadlock on frozen block devices
pidfs: make pidfs_ino_lock static
eventpoll: pin files while checking reverse paths
fs: push nr_cached_objects memcg gating into individual filesystems
afs: Fix afs_edit_dir_remove() to get, not find, block 0
iomap: prevent ioend merge when io_private differs
iomap: add comments for ifs_clear/set_range_dirty()
iomap: fix out-of-bounds bitmap_set() with zero-length range
iomap: fix incorrect did_zero setting in iomap_zero_iter()
iomap: support invalidating partial folios
iomap: correct the range of a partial dirty clear
fs/super: fix emergency thaw double-unlock of s_umount
pidfs: handle FS_IOC32_GETVERSION in compat ioctl
ovl: check access to copy_file_range source with src mounter creds
proc: Fix broken error paths for namespace links
pidfs: add pidfs_dentry_open() helper
selftests/pidfd: check PIDFD_THREAD survives open_by_handle_at()
pidfs: preserve thread pidfds reopened by file handle
ovl: fix trusted xattr escape prefix matching
selftests/fuse: add ACL_DONT_CACHE regression test
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a number of small char/misc/etc driver fixes for 7.2-rc5 that
resolve a bunch of different reported issues. Included in here are:
- rust_binder error message reporting fix
- stratix10-svc firmware driver fixes
- mei driver fix
- intel_th hardware tracing driver fix
- comedi driver fix
- uio_hv_generic driver fix
- ntsync selftest fix
- nsm misc driver fix
- some MAINTAINER file updates
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
MAINTAINERS: Update wine-devel list address
rust_binder: only print failure if error has source
intel_th: fix MSC output device reference leak
misc: nsm: pin the module while the device is open
mei: bus: access mei_device under device_lock on cleanup
misc: nsm: only unlock nsm_dev on post-lock error paths
selftests: ntsync: correct CONFIG_NTSYNC name
comedi: comedi_parport: deal with premature interrupt
uio_hv_generic: Bind to FCopy device by default
MAINTAINERS: Add Greg Kroah-Hartman to GPIB
firmware: stratix10-svc: fix teardown order in remove to prevent race
firmware: stratix10-svc: handle NO_RESPONSE in async poll
firmware: stratix10-svc: fix FCS SMC call kernel-doc
firmware: stratix10-svc: fix memory leaks and list corruption bugs
|
|
iopf_group_alloc() links each last-page IOPF group into the generic IOPF
pending list before invoking the domain fault handler.
iommufd_fault_iopf_handler() also queued an accepted group in the
IOMMUFD deliver list without removing it from the generic pending list.
When detach or HWPT replacement drops the device's IOPF reference count
to zero, an IOMMU driver may call iopf_queue_remove_device(). That
function responds to and frees groups through the generic pending list
without removing the same groups from IOMMUFD's deliver list or response
xarray. A later read, response, or cleanup can then access the freed
group and cause a UAF.
Fix this by dequeuing an accepted group from the generic pending list
before IOMMUFD queues it for userspace response.
Make iopf_group_response() send a response regardless of pending-list
membership, so the dequeued group can still be completed by IOMMUFD.
Link: https://patch.msgid.link/r/3CFD314D0FE4D7EC+20260720085017.3998878-2-peiyang_he@smail.nju.edu.cn
Closes: https://lore.kernel.org/all/B4F28798E2E784CA+d29f723c-b2b5-4b67-8d1c-4f7b9b0b27cb@smail.nju.edu.cn/
Fixes: 34765cbc679c ("iommufd: Associate fault object with iommufd_hw_pgtable")
Cc: stable@vger.kernel.org
Tested-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Assisted-by: Codex:gpt-5.6-sol
Signed-off-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
RDMA device names are unique only within a network namespace, but an
RDMA cgroup can account resources for devices from multiple namespaces.
Duplicate names therefore make cgroup output ambiguous and can cause
limit writes to select the wrong device.
Use the system-wide RDMA device index to distinguish duplicate names
while preserving the existing UAPI for unique names. Reject ambiguous
name-only writes with -ENOTUNIQ and expose a complete device view to
administrators.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260716132316.1495242-9-jiri@resnulli.us
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Immutable branch for battery array helpers to be used by the
USB-C state machine.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add power_supply_get_system_batteries() to allow drivers to obtain
a list of registered battery type power supply references in the
system. Also add power_supply_put_system_batteries() to perform
cleanup after the former function is called.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260714-batt-status-v5-1-9de4aa900b69@google.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Add support for TI BQ25792 integrated battery charger and buck-boost
converter.
It shares high-level logic of operation with the already supported
BQ25703A, but has a different register map, bit definitions and some of
the lower-level hardware states.
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260603-bq25792-v7-7-d487bed276d0@flipper.net
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
LUO keeps track of successful retrieve attempts on an FLB. It does so
to avoid multiple retrievals of the same FLB. Multiple retrievals cause
problems because once the FLB is retrieved, the serialized data
structures are likely freed and the FLB is likely in a very different
state from what the code expects.
All this works well when retrieve succeeds. When it fails,
luo_flb_retrieve_one() returns the error immediately, without ever
storing anywhere that a retrieve was attempted or what its error code
was. If the user attempts to retrieve another file registered with the
same FLB, LUO will attempt to call the FLB's retrieve() callback again.
The retry is problematic for much of the same reasons listed above. The
FLB is likely in a very different state than what the retrieve logic
normally expects (e.g. some KHO pages may have already been restored and
freed).
There is no sane way of attempting the retrieve again. Remember the
error retrieve returned and directly return it on a retry.
This is done by changing the retrieved bool to a retrieve_status
integer. A value of 0 means retrieve was never attempted, a positive
value means it succeeded, and a negative value means it failed and the
error code is the value.
This is similar to commit f85b1c6af5bc ("liveupdate: luo_file: remember
retrieve() status") which did the same for LUO files.
Fixes: cab056f2aae7 ("liveupdate: luo_flb: introduce File-Lifecycle-Bound global state")
Assisted-by: Gemini:gemini-3-pro-preview
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Link: https://patch.msgid.link/20260528174140.1921129-3-dmatlack@google.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Increment the outgoing FLB refcount in liveupdate_flb_get_outgoing() so
that the FLB structure cannot be freed while the caller is actively
using it. Add an additional liveupdate_flb_put_outgoing() function so
the caller can explicitly indicate when it is done using the outgoing
FLB.
During a Live Update, the kernel may need to fetch the outgoing FLB
outside of the scope of a file handler's preserve() and unpreserve()
callbacks. In that situation there is no way for the caller to protect
itself against the outgoing FLB from being freed while it is using it.
Incrementing the reference count in liveupdate_flb_get_outgoing()
ensures it cannot be freed.
This change also aligns the outgoing FLB lifecycle management with the
incoming FLB, since the latter uses the same get/put semantics.
Fixes: cab056f2aae7 ("liveupdate: luo_flb: introduce File-Lifecycle-Bound global state")
Assisted-by: Gemini:gemini-3-pro-preview
Signed-off-by: David Matlack <dmatlack@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Link: https://patch.msgid.link/20260528174140.1921129-2-dmatlack@google.com
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
|
|
Cross-merge BPF and other fixes after downstream PR.
Conflicts:
net/core/filter.c
Changes [2] in bpf-next conflict with a recent fix [1]
from the 'net' tree. Resolved by using [1] as a base and
applying same flags handling logic as in [2] in the
bpf_redirect_peer() helper.
[1] https://lore.kernel.org/all/20260706185609.330006-2-daniel@iogearbox.net/
[2] https://lore.kernel.org/all/20260618182035.43811-2-jordan@jrife.io/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following batch contains Netfilter/IPVS fixes for net. This batch
includes a mix of IPVS follow ups related to Sashiko reports, as well as
crash fixes for connection tracking expectation, helpers, ipset and
nf_tables mostly for old bugs. This also includes a fix for the
flowtable tunnel selftest.
1) Use s32 instead of s16 to calculate the remaining payload containing
SIP messages, otherwise underflow is possible allowing out-of-bound
memory access beyond the skb->data area. From Xiang Mei.
2) Fix the counter check in the flowtable selftest for tunnels, from
Lorenzo Bianconi.
3) Add and use nf_ct_expect_related_pair() to add the RTP and RTCP
expectations under the expectation lock, this is required by the SIP
and H.323 NAT helpers. This fixes a possible reinsertion of an
expectation with the DEAD flag set on while looping to find
consecutive ports.
4) Fix ipset UaF during table resize by blocking comment updates on
kernel-side adds. From David Lee.
5) Do not propagate the IP_VS_CONN_F_ONE_PACKET flag when using IPVS
state synchronization, otherwise reaching stale freed from
ip_vs_conn struct is possible, Zhiling Zou.
6) Adjust the hn1 hash node when the forwarding method changes between
MASQ and non-MASQ for an already hashed connection. This can leave
stale hash nodes pointing to a freed struct ip_vs_conn and trigger
UaF while reading /proc/net/ip_vs_conn. From Julian Anastasov.
7) nft_object rhltable needs to be per table, just like chain rhltable,
otherwise UaF from object lookup path while netns is being released.
There is also the nlevent path that can reach stale objects. Placing
this rhltable under the table hierarchy fixes this issue.
8) Reject invalid combined usage of hashlimit tables with and without
XT_HASHLIMIT_RATE_MATCH flag mode, otherwise access to uninitialized
.burst field of dsthash_ent is possible.
9) Fix checksum validations in IPVS performed from LOCAL_IN,
from Julian Anastasov.
10) Fix incorrect packet offset to layer 4 protocol in IPVS, uncovered
by Sashiko, from Julian Anastasov.
11) Skip the mangling of ICMP replies for non-first fragments, also
reported by Sashiko. Also from Julian.
12) Clear ip_vs_conn flags under the spinlock to fix a possible data
race. From Julian Anastasov.
13) Fix incorrect calculation of the payload bitmask in the nf_tables
hardware offload support, leading to UBSAN splat. From Xiang Mei.
* tag 'nf-26-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_payload: fix mask build for partial field offload
ipvs: clear the nfct flag under lock
ipvs: do not mangle ICMP replies for non-first fragments
ipvs: fix places with wrong packet offsets
ipvs: fix the checksum validations
netfilter: xt_hashlimit: validate hashtable supports XT_HASHLIMIT_RATE_MATCH
netfilter: nf_tables: make nft_object rhltable per table
ipvs: adjust double hashing when fwd method changes
ipvs: do not propagate one-packet flag to synced conns
netfilter: ipset: do not update comments from kernel-side hash adds
netfilter: nf_conntrack_expect: add and use nf_ct_expect_related_pair()
selftests: netfilter: nft_flowtable.sh: fix offload counter verification for tunnel tests
netfilter: nf_conntrack_sip: widen NAT rewrite delta to s32 in sip_help_tcp()
====================
Link: https://patch.msgid.link/20260723163910.274695-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As noted by Marco Elver:
rcu_read_lock_trace()
....
t->trc_reader_scp = __srcu_read_lock_fast(&rcu_tasks_trace_srcu_struct);
<interrupt>
rcu_read_unlock_trace()
< ... var decls only ... >
scp = t->trc_reader_scp;
This constitutes a data race between these two accesses to
t->trc_reader_scp. If rcu_read_lock_trace() were to tear its store,
this value would be corrupted.
This commit therefore defers the rcu_read_lock_untrace() function's
load from t->trc_reader_scp until after it has verified that this is
the outermost rcu_read_unlock_trace(). With this change, the interrupt
handler increments and decrements t->trc_reader_nesting and does not
access t->trc_reader_scp, thus avoiding the data race.
KCSAN located this issue.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Update documentation comments throughout the RCU callback infrastructure
to reflect the transition from a single grace-period sequence number to
the full struct rcu_gp_seq that tracks both normal and expedited grace
periods.
The ->gp_seq[] array documentation in rcu_segcblist.h is updated to
describe dual (normal and expedited) GP tracking. The
rcu_segcblist_advance(), rcu_segcblist_accelerate(), and
rcu_advance_cbs() comments are updated to refer to the struct rcu_gp_seq
state (gsp) instead of the old bare grace-period sequence number (seq).
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The trampoline could be corrupted by the blindly
'tr->flags = BPF_TRAMP_F_TAIL_CALL_CTX' in verifier.
1. A fexit attached to a tail_call_reachable prog. 'tr->flags' became
'BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_TAIL_CALL_CTX'. And, the
trampoline would poke the target prog's nop insn using jmp insn instead
of call insn.
2. Another fexit loaded with the same tail_call_reachable prog target.
'tr->flags' became 'BPF_TRAMP_F_TAIL_CALL_CTX'.
3. Close the first fexit link. Due to no BPF_TRAMP_F_CALL_ORIG in
'tr->flags', the trampoline will fail to restore the prog's nop insn
using call insn.
[ 3.410719] WARNING: kernel/bpf/syscall.c:3551 at bpf_tracing_link_release+0x53/0x60, CPU#1: test_progs/98
...
[ 3.428793] bpf_link_free+0x58/0x130
[ 3.429293] bpf_link_release+0x23/0x30
Fix the warning by updating 'tr->flags' with '|=' and lock.
Fixes: 2b5dcb31a19a ("bpf, x64: Fix tailcall infinite loop")
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20260722151909.69142-2-leon.hwang@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Pull fscrypt fixes from Eric Biggers:
"A couple fixes for AI-detected bugs"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: Avoid dynamic allocation in fscrypt_get_devices()
fscrypt: Add missing superblock check in find_or_insert_direct_key()
|
|
linux/gpio.h should no longer be used, convert these instead to
either linux/gpio/consumer.h or linux/gpio/legacy.h as needed.
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Most users of gpio-keys and gpio-keys-polled use modern gpiolib
interfaces, but there are still number of ancient sh, arm32 and x86
machines that have never been converted.
Add an #ifdef block for the parts of the driver that are only used on
those legacy machines.
Link: https://lore.kernel.org/all/b3c94552-c104-42e3-be15-7e8362e8039e@gmail.com/
Link: https://lore.kernel.org/all/afJXG4_rtaj3l2Dk@google.com/
Link: https://lore.kernel.org/all/ajQ-CtU131FAJ9ES@google.com/
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
On recent MediaTek SoCs such as MT6858, the kernel is required to use
a secure monitor call (SMC) to enable or disable the modem power domain.
The power domain control register can be read, but firmware prevents it
from being modified directly. Some other parts of the power sequence,
such as setting the ext_buck_iso register, still need to be performed on
the kernel side.
In preparation for modem support, add a flag to enable this new power
sequence for SoCs that need it. Power domains using this flag are not
expected to configure any bus protection registers, since these are
handled internally by the SMC call.
Signed-off-by: Nikolai Burov <nikolai.burov@jolla.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Prevent unbounded recursion in free path with memory allocation
profiling, which has caused a stack overflow on a Meta production
host due to a 125-deep __free_slab<->kfree recursion (Harry Yoo)
- Fix type-based partitioning confusing sparse which does not know
__builtin_infer_alloc_token() (Marco Elver)
- Fix a potential memory leak in bulk freeing path on NUMA machines
(Shengming Hu)
* tag 'slab-for-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: silence sparse warning with type-based partitioning
mm/slab: prevent unbounded recursion in free path with new kmalloc type
lib/alloc_tag: introduce mem_alloc_profiling_permanently_disabled()
mm/slab: decouple SLAB_NO_SHEAVES from SLAB_NO_OBJ_EXT
mm/slab: fix a memory leak due to bootstrapping sheaves twice
mm/slub: fix lost local objects when bulk remote free batch fills
|
|
Pass master conntrack as argument to helper functions that parse the
packet payload, instead of using exp->master. Although accessing
exp->master is safe in this case because it refers to the master
conntrack in used by this skb, remove it to step towards turning the
exp->master field into a cookie value.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Move the vendor and device ID for the existing Spacemit K1 PCIe Root
Complex to include/linux/pci_ids.h. Also add K3's Root Complex device ID
to this header. This is done so that these values can be referenced in
the rtw89 driver to enable 36-bit DMA ability in it for WiFi to function
on the K3 Pico ITX board.
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Anirudh Srinivasan <asrinivasan@oss.tenstorrent.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260716-rtw89-spacemit-k3-v2-1-392b577ebf75@oss.tenstorrent.com
|
|
Period measurement can be difficult when using high sampling
frequency where the jitter criteria is hard to meet because of the
system jitter.
This new version is using the delta time between 2 distant interrupts
to measure an interval of at least 20ms. 20ms is a good compromise
between the mitigation of system jitter and the delay to update
period. This way we decorrelate the period measurement from the
interrupt timestamps syncing using only the 2 last interrupts.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
Convert standard types (u)intXX_t to kernel type u/sXX.
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <jonathan.cameron@oss.qualcomm.com>
|
|
Mark the @value union members as private since they are an internal
representation of @value. This prevents kernel-doc warnings:
Warning: include/linux/property.h:406 struct member 'u8_data' not
described in 'property_entry'
Warning: include/linux/property.h:406 struct member 'u16_data' not
described in 'property_entry'
Warning: include/linux/property.h:406 struct member 'u32_data' not
described in 'property_entry'
Warning: include/linux/property.h:406 struct member 'u64_data' not
described in 'property_entry'
Warning: include/linux/property.h:406 struct member 'str' not described
in 'property_entry'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260721023218.3490573-1-rdunlap@infradead.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.2-rc5).
Conflicts:
drivers/net/amt.c
3656a79f94c47 ("amt: re-read skb header pointers after every pull")
586c4dcf28eb6 ("amt: no longer rely on RTNL in amt_fill_info()")
https://lore.kernel.org/amIaJr3aOQNS_Fvl@sirena.org.uk
Adjacent changes:
drivers/net/geneve.c
8efb8f8bbb35 ("geneve: require CAP_NET_ADMIN in the device netns for changelink")
0ba269933f73 ("geneve: convert config to RCU-protected pointer")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Every resctrl resource has a unique ID described by enum resctrl_res_level.
enum resctrl_res_level is used in all resource ID initializations and all
resource ID comparisons. All functions consuming the resource ID expects an
enum resctrl_res_level. Of the four structures that contain a resource ID
(struct mon_data, struct mon_evt, struct rdt_domain_hdr, and struct
rdt_resource) only struct rdt_resource does not use enum resctrl_res_level.
Switch the type of rdt_resource::rid to be enum resctrl_res_level to make
it obvious what values are valid, match the type everywhere this member is
used, and obtain benefits from tools that can flag any enum misuse.
Move define of RDT_NUM_RESOURCES outside the enum to enable tools to catch
when a switch() on the resource ID does not handle all the resources and
thus help flag which switch statements need an update when a new resource
is added.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ben Horgan <ben.horgan@arm.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://patch.msgid.link/926b334c50b00b4b763c983c0dca6d4ec9083d60.1782857711.git.reinette.chatre@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Lots of fixes, double the count even for the 'new normal'. Largely due
to my time off followed by a networking conference which distracted
most maintainers (less so the AI generators).
Including fixes from Bluetooth and WiFi.
Current release - regressions:
- wifi: mt76: fix MAC address for non OF pcie cards
Current release - new code bugs:
- mptcp: fix BUILD_BUG_ON on legacy ARM config
- wifi: cfg80211: guard optional PMSR nominal time
Previous releases - regressions:
- qrtr: ns: raise node count limit to 512, we arbitrarily picked
256 as a limit, turns out it was too low for real world deployments
- vhost-net: fix TX stall when vhost owns virtio-net header
- eth: amd-xgbe: fix MAC_AUTO_SW handling in CL37 AN
- wifi: ath12k: fix low MLO RX throughput on WCN7850
Previous releases - always broken:
- number of random AI fixes for SCTP, RDS and TIPC protocols
- more AI-looking fixes for WiFi drivers
- number of fixes for missing pointer reloading after skb pull
- reject BPF redirect use from qdisc qevent block
- tcp: initialize standalone TCP-AO response padding
- vsock/virtio: collapse receive queue under memory pressure to avoid
client OOMing the host with tiny messages
- ipv4: icmp: fill flow parameters in icmp_route_lookup decoy lookup,
make sure the ICMP response routing follows the routing policy
- gro: fix double aggregation of flush-marked skbs
- ovpn: fix various refcount bugs
- tls: device: push pending open record on splice EOF
- eth: mlx5:
- use sender devcom for MPV master-up
- fix MCIA register buffer overflow on 32 dword reads"
* tag 'net-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (234 commits)
drop_monitor: perform u64_stats updates under IRQ-disabled section
drop_monitor: fix size calculations for 64-bit attributes
net: drop_monitor: fix info leak in NET_DM_ATTR_PAYLOAD
mptcp: fix BUILD_BUG_ON on legacy ARM config
selftests: mptcp: userspace_pm: fix undefined variable port
mptcp: fix stale skb->sk reference on subflow close
mptcp: pm: userspace: fix use-after-free in get_local_id
mptcp: decrement subflows counter on failed passive join
mac802154: hold an interface reference across the scan worker
sctp: don't free the ASCONF's own transport in DEL-IP processing
phonet: check register_netdevice_notifier() error in phonet_device_init()
phonet: pep: fix use-after-free in pep_get_sb()
bnge/bng_re: fix ring ID widths
tipc: fix integer overflow in tipc_recvmsg() and tipc_recvstream()
net: airoha: fix ETS channel derivation in airoha_tc_setup_qdisc_ets()
mctp: check register_netdevice_notifier() error in mctp_device_init()
ptp: netc: explicitly clear TMR_OFF during initialization
rds: tcp: unregister sysctl before tearing down listen socket
ipv6: Change allocation flags to match rcu_read_lock section requirements
net: slip: serialize receive against buffer reallocation
...
|
|
Before XO refclk is distributed to PCIe/USB/eDP PHYs, it passes through
a QREF block. QREF is powered by dedicated LDO rails, and the clkref_en
register controls whether refclk is gated through to the PHY side.
These clkref controls are different from typical GCC branch clocks:
- only a single enable bit is present, without branch-style config bits
- regulators must be voted before enable and unvoted after disable
Model this as a dedicated clk_ref clock type with custom clk_ops instead
of reusing struct clk_branch semantics.
Also provide a common registration/probe API so the same clkref model
can be reused regardless of where clkref_en registers are placed, e.g.
TCSR on glymur and TLMM on SM8750.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260721-tcsr_qre_0721-v10-3-d2fa68c63b78@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
- add/correct missing struct members in struct regmap_bus
- add a missing function parameter @dev
- add missing struct member in struct regmap_irq_type
- add missing struct members in struct regmap_irq_chip
to prevent kernel-doc warnings:
Warning: include/linux/regmap.h:630 struct member 'reg_noinc_write' not
described in 'regmap_bus'
Warning: include/linux/regmap.h:630 struct member 'reg_noinc_read' not
described in 'regmap_bus'
Warning: include/linux/regmap.h:630 Excess struct member 'reg_write_noinc'
description in 'regmap_bus'
Warning: include/linux/regmap.h:1001 function parameter 'dev' not
described in 'regmap_init_sdw_mbq_cfg'
Warning: include/linux/regmap.h:1600 struct member 'type_reg_mask' not
described in 'regmap_irq_type'
Warning: include/linux/regmap.h:1775 struct member 'irq_reqres' not
described in 'regmap_irq_chip'
Warning: include/linux/regmap.h:1775 struct member 'irq_relres' not
described in 'regmap_irq_chip'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now that rcutorture tests readers from interrupt handlers, KCSAN spotted
an additional data race. This commit therefore fixes it by applying
READ_ONCE() and WRITE_ONCE().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
A simple comparison of a pointer returned by rcu_access_pointer() results
in a context-analysis warning for lockless inspection of the RCU-protected
(also known as __rcu-protected) pointer. This can be suppressed by
placing context_unsafe() calls around calls rcu_access_pointer(),
but this is messy and distracting. This commit therefore wraps the
underlying __rcu_access_pointer() macro with a call to context_unsafe(),
thereby informing the context-analysis code that rcu_access_pointer()
may safely be invoked outside of an RCU read-side critical section.
Reported-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Marco Elver <elver@google.com>
|
|
Change the type of the per-segment ->gp_seq[] array in struct
rcu_segcblist from unsigned long to struct rcu_gp_seq. This prepares the
callback tracking infrastructure to record both normal and expedited
grace periods per segment.
The rcu_segcblist_nextgp(), rcu_segcblist_advance(), and
rcu_segcblist_accelerate() helpers now take a struct rcu_gp_seq * instead
of an unsigned long, and all callers use the .norm field for comparisons
and assignments. The SRCU and Tasks RCU wrappers construct a struct
rcu_gp_seq with only .norm set and forward to the core helpers.
No functional change: only the .norm field is used.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The polled grace-period state structure rcu_gp_oldstate holds a snapshot
of the normal (and, on SMP, expedited) grace-period sequence numbers.
Upcoming changes store this structure in the callback segment list, where
the "oldstate" name reads poorly: there it represents the grace period a
segment is waiting on and is also compared against the current
grace-period state.
Rename struct rcu_gp_oldstate to the more neutral struct rcu_gp_seq, and
shorten its members rgos_norm and rgos_exp to norm and exp. Local
variables and parameters of this type are renamed from rgosp/rgos to
gsp/gs accordingly.
While at it, provide a single definition of the structure in rcupdate.h
rather than separate Tiny-RCU and Tree-RCU definitions, and give it the
->exp field unconditionally. Tiny RCU does not track expedited grace
periods and leaves ->exp unused, but a single definition that always has
->exp lets the shared callback code in rcu_segcblist.c reference it
without CONFIG_SMP guards, including on !SMP builds.
No functional change.
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Tariq Toukan says:
====================
mlx5-next updates 2026-07-22
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Add PSP related fields to the mlx5_ifc
net/mlx5: Drop redundant esw_cap, reuse e_switch_cap
====================
Link: https://patch.msgid.link/20260722071030.1693021-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Firmware requires more than 16 bits to address TX ring IDs for its
internal QP management. Widen the associated HSI ring ID fields to
32 bits. The values firmware assigns remain within 24 bits, bounded
by the hardware doorbell XID field.
The fw_ring_id field belongs to bnge_ring_struct, a common struct
shared by all ring types, so widening it to u32 applies uniformly
across TX, RX, CP, and NQ rings but firmware assigns values within
16-bit range for all ring types except TX, which requires the wider
field.
Note that, Thor Ultra hardware has not yet been deployed and no
firmware has been released to field, so backward compatibility
is not a concern.
Fixes: 42d1c54d6248 ("bnge/bng_re: Add a new HSI")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Reviewed-by: Dharmender Garg <dharmender.garg@broadcom.com>
Reviewed-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Link: https://patch.msgid.link/20260721063731.2622500-1-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Extract the EC feature-reading logic from cros_ec_check_features() into
cros_ec_read_features() helper function.
Currently, cros_ec_check_features() swallows command transfer errors. By
isolating the transaction logic into an explicit helper that returns the
actual transfer error code, subsequent callers (such as the cros_ec_dev
driver during device probing) can catch a read error.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260608211518.2214740-2-akuchynski@chromium.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The MCIA register can return up to 32 dwords (128 bytes) when the device
advertises the mcia_32dwords capability, but struct
mlx5_ifc_mcia_reg_bits only defines dword_0..11, leaving room for just
12 dwords (48 bytes) of data.
mlx5_query_mcia() clamps the read size to mlx5_mcia_max_bytes() and then
memcpy()s that many bytes out of the register, potentially reading past
the end of the 'out' buffer. On kernels built with FORTIFY_SOURCE this
is caught as a buffer overflow while reading the module EEPROM via
ethtool:
detected buffer overflow in memcpy
kernel BUG at lib/string_helpers.c:1048!
RIP: 0010:fortify_panic+0x13/0x20
Call Trace:
mlx5_query_mcia.isra.0+0x200/0x210 [mlx5_core]
mlx5_query_module_eeprom_by_page+0x4a/0xa0 [mlx5_core]
mlx5e_get_module_eeprom_by_page+0xbb/0x120 [mlx5_core]
eeprom_prepare_data+0xf3/0x170
ethnl_default_doit+0xf1/0x3b0
Extend the mcia_reg layout to 32 dwords.
Fixes: 271907ee2f29 ("net/mlx5: Query the maximum MCIA register read size from firmware")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Alex Lazar <alazar@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260717072338.1240582-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
vfs_lookup_open() is a limited version of lookup_open() which is
exported for nfsd to use - to replace dentry_create().
It is limited in that no filename is given (thus no auditing) and no
LOOKUP_ flags are passed. A few "intent" LOOKUP flags are deduced from
the open flags.
If a non-regular file is found and appropriate error is returned and no
file is opened.
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://patch.msgid.link/20260714230534.776886-4-neilb@ownmail.net
Reviewed-by: Jori Koolstra <jkoolstra@xs4all.nl>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
There are still a handful of ancient mips/armv5/sh boards that use the
gpio_led:gpio member to pass an old-style gpio number, but all modern
users have been converted to gpio descriptors.
While the CONFIG_GPIOLIB_LEGACY option that guards devm_gpio_request_one()
and related helpers is currently turned on in all kernel builds,
the plan is to only enable it on the few platforms that actually
pass gpio numbers in any platform_data.
Split out the legacy portion of the platform_data handling into a custom
helper function that is guarded with in #ifdef block, to allow the
the leds-gpio driver to compile cleanly when CONFIG_GPIOLIB_LEGACY
gets turned off. Once the last user is converted, this function can
be removed.
Link: https://lore.kernel.org/all/e9252384-a55c-4a91-9c61-06e05a0b2ce4@app.fastmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> # for input
Link: https://patch.msgid.link/20260710211854.1371746-4-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
pci_sriov_get_totalvfs() reports a VF count, not an errno-style
status. It returns 0 when SR-IOV is unavailable or the device is not a
PF, and otherwise returns the PF's driver_max_VFs value.
driver_max_VFs is stored as a u16 in struct pci_sriov. It is derived
from the SR-IOV TotalVFs field or from a driver-provided limit, so the
implementation cannot return a negative value.
Change the declaration, CONFIG_PCI_IOV stub, and implementation to
return unsigned int.
Suggested-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: David Laight <david.laight.linux@gmail.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: linux-pci@vger.kernel.org
Link: https://lore.kernel.org/all/DJHPRE4TGGT8.BUTMYOF5YE05@nvidia.com/
Signed-off-by: Zhi Wang <zhiw@nvidia.com>
Link: https://patch.msgid.link/20260722073913.1807677-2-zhiw@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge amd-pstate content for 7.3 (07/22/26) from Mario Limonciello:
"* Avoid running unit tests without amd-pstate
* Fixes for EPP on shared memory systems
* Fixes for dynamic EPP callbacks
* Avoid loading on guests
* Allow lowest nonlinear == minimum freq"
* tag 'amd-pstate-v7.3-2026-07-22' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux: (923 commits)
cpufreq/amd-pstate: handle missing policy in dynamic EPP callbacks
cpufreq/amd-pstate: Cache the firmware programmed EPP value
cpufreq/amd-pstate: Toggle auto_sel in active mode on shared memory systems
cpufreq/amd-pstate: Fix EPP return type and handle errors during initialization
cpufreq: amd-pstate-ut: Skip tests when amd-pstate driver is not active
cpufreq/amd-pstate: Prevent the driver from loading on unsupported hardware
cpufreq/amd-pstate: Loosen requirement on lowest nonlinear frequency != min freq
Linux 7.2-rc4
Revert "drm/amd/display: Restore 5s vbl offdelay for NV3x+ DGPUs"
drm/amd/display: check GRPH_FLIP status before sending event
drm/amd/display: consolidate DCN vblank/flip handling onto vupdate_no_lock
drm/amd: Create a device link between APU display and XHCI devices
drm/amd/display: wire DCN42B mcache programming callback
drm/amd/display: set new_stream to NULL after release
drm/amd/display: Force PWM backlight on Lenovo Legion 5 15ARH05
drm/amdkfd: free MQD managers on DQM init failures
drm/amdgpu/ttm: Consider concurrent VM flushes for buffer entities
drm/amd/pm/smu7: Fix AC/DC switch notification
drm/amdgpu: Disable PCIe dynamic speed switching on Ryzen Pinnacle Ridge
drm/amdgpu: always emit the job vm fence
...
|
|
Commit 0baad6f9b997 ("fs/super: skip non-memcg-aware nr_cached_objects
in memcg slab shrink") added a check in fs/super.c that skipped every
->nr_cached_objects() hook whenever the shrinker was invoked for a
non-root memcg, on the assumption that none of them honour sc->memcg.
That assumption is wrong for XFS, whose inode-reclaim hook is
intentionally driven from per-memcg contexts to free memcg-charged
slab. Encoding a blanket "never memcg-aware" policy in fs/super.c
short-circuits that path.
Push the check down into the callbacks whose counters really are
irrelevant to per-memcg reclaim - btrfs_nr_cached_objects() and
shmem_unused_huge_count() - and drop the fs/super.c gate. Each
filesystem can now lift the restriction independently if its counter
later grows memcg awareness, without touching fs/super.c.
Introduce mem_cgroup_shrink_is_root() in <linux/memcontrol.h> so the
callbacks don't open-code "sc->memcg is NULL or root".
Fixes: 0baad6f9b997 ("fs/super: skip non-memcg-aware nr_cached_objects in memcg slab shrink")
Acked-by: Qi Zheng <qi.zheng@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Usama Arif <usama.arif@linux.dev>
Link: https://patch.msgid.link/20260715103516.2410175-1-usama.arif@linux.dev
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
This makes starting handles a little more efficient, since it avoids
requiring bitshifts when setting or getting the h_type and h_line_no
fields in the jbd2_journal_handle structure.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
|
|
The jbd2 layer enables NOFS mode using memalloc_nofs_{save,restore}()
while a handle is active. We need to do the same in nojournal mode so
that it is safe to remove GFP_NOFS flags while a jbd2 handle is
active.
This will require that we actually allocate a real handle, but with an
h_invalid flag set, so there is a place to put the saved memalloc
context.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
|
