| Age | Commit message (Collapse) | Author |
|---|
|
Since pm_runtime_force_resume() and pm_runtime_need_not_resume() are only
needed for handling system-wide PM transitions, there is no reason to
compile them in if CONFIG_PM_SLEEP is unset.
Accordingly, move them under CONFIG_PM_SLEEP and make the static
inline stub for pm_runtime_force_resume() return an error to indicate
that it should not be used outside CONFIG_PM_SLEEP.
Putting pm_runtime_force_resume() also allows subsequent changes to
be more straightforward because this function is going to access a
device PM flag that is only defined when CONFIG_PM_SLEEP is set.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/3384523.aeNJFYEL58@rjwysocki.net
|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250626154244.324265-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add device pointer to irq_domain_info and msi_domain_info, so that the device
can be specified at domain creation time.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/943e52403b20cf13c320d55bd4446b4562466aab.1750860131.git.namcao@linutronix.de
|
|
The inlined ptp_read_system_[pre|post]ts() switch cases expand to a copious
amount of text in drivers, e.g. ~500 bytes in e1000e. Adding auxiliary
clock support to the inlines would increase it further.
Replace the inline switch case with a call to ktime_get_clock_ts64(), which
reduces the code size in drivers and allows to access auxiliary clocks once
they are enabled in the IOCTL parameter filter.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20250701132628.426168092@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Base implementation for PTP with a temporary CLOCK_AUX* workaround to
allow integration of depending changes into the networking tree.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
ktime_get_clock_ts64() was provided for the networking tree as a stand
alone commit based on v6.16-rc1. It contains a temporary workaround for the
CLOCK_AUX* defines, which are only available in the timekeeping tree.
As this commit is now merged into the timers/ptp branch, which contains the
real CLOCK_AUX* defines, the workaround is obsolete.
Remove it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250701130923.579834908@linutronix.de
|
|
Pull the base implementation of ktime_get_clock_ts64() for PTP, which
contains a temporary CLOCK_AUX* workaround. That was created to allow
integration of depending changes into the networking tree. The workaround
is going to be removed in a subsequent change in the timekeeping tree.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
PTP implements an inline switch case for taking timestamps from various
POSIX clock IDs, which already consumes quite some text space. Expanding it
for auxiliary clocks really becomes too big for inlining.
Provide a out of line version.
The function invalidates the timestamp in case the clock is invalid. The
invalidation allows to implement a validation check without the need to
propagate a return value through deep existing call chains.
Due to merge logistics this temporarily defines CLOCK_AUX[_LAST] if
undefined, so that the plain branch, which does not contain any of the core
timekeeper changes, can be pulled into the networking tree as prerequisite
for the PTP side changes. These temporary defines are removed after that
branch is merged into the tip::timers/ptp branch. That way the result in
-next or upstream in the next merge window has zero dependencies.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250701132628.357686408@linutronix.de
|
|
The system manager indices names are different for each platform, rename
the indices for i.MX95 to differentiate with other platform.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250620055229.965942-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On i.MX94, the MQS2 also needs to be configured by SCMI interface, add
sm_index variable in struct fsl_mqs_soc_data to distinguish the MQS1 and
MQS2 on this platform.
Add the system manager indices for i.MX94 in the header file.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250620055229.965942-2-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fixes for v6.16
Couple of fixes to address:
1. The safety and memory issues in the FF-A notification callback handler:
The fixes replaces a mutex with an rwlock to prevent sleeping in atomic
context, resolving kernel warnings. Memory allocation is moved outside
the lock to support this transition safely. Additionally, a memory leak
in the notifier unregistration path is fixed by properly freeing the
callback node.
2. The missing entry in struct ffa_indirect_msg_hdr:
The fix adds the missing 32 bit reserved entry in the structure as
required by the FF-A specification.
* tag 'ffa-fixes-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fix the missing entry in struct ffa_indirect_msg_hdr
firmware: arm_ffa: Replace mutex with rwlock to avoid sleep in atomic context
firmware: arm_ffa: Move memory allocation outside the mutex locking
firmware: arm_ffa: Fix memory leak by freeing notifier callback node
Link: https://lore.kernel.org/r/20250609105207.1185570-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The DCCP socket family has now been removed from this tree, see:
8bb3212be4b4 ("Merge branch 'net-retire-dccp-socket'")
Remove connection tracking and NAT support for this protocol, this
should not pose a problem because no DCCP traffic is expected to be seen
on the wire.
As for the code for matching on dccp header for iptables and nftables,
mark it as deprecated and keep it in place. Ruleset restoration is an
atomic operation. Without dccp matching support, an astray match on dccp
could break this operation leaving your computer with no policy in
place, so let's follow a more conservative approach for matches.
Add CONFIG_NFT_EXTHDR_DCCP which is set to 'n' by default to deprecate
dccp extension support. Similarly, label CONFIG_NETFILTER_XT_MATCH_DCCP
as deprecated too and also set it to 'n' by default.
Code to match on DCCP protocol from ebtables also remains in place, this
is just a few checks on IPPROTO_DCCP from _check() path which is
exercised when ruleset is loaded. There is another use of IPPROTO_DCCP
from the _check() path in the iptables multiport match. Another check
for IPPROTO_DCCP from the packet in the reject target is also removed.
So let's schedule removal of the dccp matching for a second stage, this
should not interfer with the dccp retirement since this is only matching
on the dccp header.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD, GPIO, Input and PWM due for the v6.17 merge window
|
|
feature
Introduce a new API, intel_pmt_get_regions_by_feature(), that gathers
telemetry regions based on a provided capability flag. This API enables
retrieval of regions with various capabilities (for example, RMID-based
telemetry) and provides a unified interface for accessing them. Resource
management is handled via reference counting using
intel_pmt_put_feature_group().
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-15-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add intel_pmt_get_features() in PMT Discovery to enable the PMT Telemetry
driver to obtain attributes of the aggregated telemetry spaces it
enumerates. The function gathers feature flags and associated data (like
the number of RMIDs) from each PMT entry, laying the groundwork for a
future kernel interface that will allow direct access to telemetry regions
based on their capabilities.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-14-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add functions, intel_vsec_set/get_mapping(), to set and retrieve the
OOBMSM-to-CPU mapping data in the private data of the parent Intel VSEC
driver. With this mapping information available, other Intel VSEC features
on the same OOBMSM device can easily access and use the mapping data,
allowing each of the OOBMSM features to map to the CPUs they provides data
for.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-12-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
The TPMI platform information provides a mapping of OOBMSM PCI devices to
logical CPUs. Since this mapping is consistent across all OOBMSM features
(e.g., TPMI, PMT, SDSi), it can be leveraged by multiple drivers. To
facilitate reuse, relocate the struct intel_tpmi_plat_info to intel_vsec.h,
renaming it to struct oobmsm_plat_info, making it accessible to other
features. While modifying headers, place them in alphabetical order.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-11-david.e.box@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
This patch introduces a new driver to enumerate and expose Intel Platform
Monitoring Technology (PMT) capabilities via a simple discovery mechanism.
The PMT Discovery driver parses hardware-provided discovery tables from
Intel Out of Band Management Services Modules (OOBMSM) and extracts feature
information for various providers (such as TPMI, Telemetry, Crash Log,
etc). This unified interface simplifies the process of determining which
manageability and telemetry features are supported by a given platform.
This new feature is described in the Intel Platform Monitoring Technology
3.0 specification, section 6.6 Capability.
Key changes and additions:
New file drivers/platform/x86/intel/pmt/discovery.c:
– Implements the discovery logic to map the discovery resource, read
the feature discovery table, and validate feature parameters.
New file drivers/platform/x86/intel/pmt/features.c:
– Defines feature names, layouts, and associated capability masks.
– Provides a mapping between raw hardware attributes and sysfs
representations for easier integration with user-space tools.
New header include/linux/intel_pmt_features.h:
– Declares constants, masks, and feature identifiers used across the
PMT framework.
Sysfs integration:
– Feature attributes are exposed under /sys/class/intel_pmt.
– Each device is represented by a subfolder within the intel_pmt class,
named using its DBDF (Domain:Bus:Device.Function), e.g.:
features-0000:00:03.1
– Example directory layout for a device:
/sys/class/intel_pmt/features-0000:00:03.1/
├── accelerator_telemetry
├── crash_log
├── per_core_environment_telemetry
├── per_core_performance_telemetry
├── per_rmid_energy_telemetry
├── per_rmid_perf_telemetry
├── tpmi_control
├── tracing
└── uncore_telemetry
By exposing PMT feature details through sysfs and integrating with the
existing PMT class, this driver paves the way for more streamlined
integration of PMT-based manageability and telemetry tools.
Link: https://www.intel.com/content/www/us/en/content-details/710389/intel-platform-monitoring-technology-intel-pmt-external-specification.html
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-9-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Add the PCIe VSEC ID for new Intel Platform Monitoring Technology
Capability Discovery feature. Discovery provides detailed information for
the various Intel VSEC features. Also make the driver a supplier for
TPMI and Telemetry drivers which will use the information.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-8-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
New Intel VSEC features will have dependencies on other features, requiring
certain supplier drivers to be probed before their consumers. To enforce
this dependency ordering, introduce device links using device_link_add(),
ensuring that suppliers are fully registered before consumers are probed.
- Add device link tracking by storing supplier devices and tracking their
state.
- Implement intel_vsec_link_devices() to establish links between suppliers
and consumers based on feature dependencies.
- Add get_consumer_dependencies() to retrieve supplier-consumer
relationships.
- Modify feature registration logic:
* Consumers now check that all required suppliers are registered before
being initialized.
* suppliers_ready() verifies that all required supplier devices are
available.
- Prevent potential null consumer name issue in sysfs:
- Use dev_set_name() when creating auxiliary devices to ensure a
unique, non-null consumer name.
- Update intel_vsec_pci_probe() to loop up to the number of possible
features or when all devices are registered, whichever comes first.
- Introduce VSEC_CAP_UNUSED to prevent sub-features (registered via
exported APIs) from being mistakenly linked.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20250703022832.1302928-5-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
Callers couldn't care less which dentry did we get - anything
valid is treated as success.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Instead of returning a dentry or ERR_PTR(-E...), return 0 and store
dentry into pipe->dentry on success and return -E... on failure.
Callers are happier that way...
NOTE: dummy rpc_pipe is getting ->dentry set; we never access that,
since we
1) never call rpc_unlink() for it (dentry is taken out by
->kill_sb())
2) never call rpc_queue_upcall() for it (writing to that
sucker fails; no downcalls are ever submitted, so no replies are
going to arrive)
IOW, having that ->dentry set (and left dangling) is harmless,
if ugly; cleaner solution will take more massage.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
1) pass it pipe instead of pipe->dentry
2) zero pipe->dentry afterwards
3) it always returns 0; why bother?
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Set the things up for kernel-initiated creation of object in
a tree-in-dcache filesystem. With respect to locking it's
an equivalent of filename_create() - we either get a negative
dentry with locked parent, or ERR_PTR() and no locks taken.
tracefs and debugfs had that open-coded as part of their
object creation machinery; switched to calling new helper.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
simple_recursive_removal() assumes that parent is not locked and
locks it when it finally gets to removing the victim itself.
Usually that's what we want, but there are places where the
parent is *already* locked and we need it to stay that way.
In those cases simple_recursive_removal() would, of course,
deadlock, so we have to play racy games with unlocking/relocking
the parent around the call or open-code the entire thing.
A better solution is to provide a variant that expects to
be called with the parent already locked by the caller.
Parent should be locked with I_MUTEX_PARENT, to avoid false
positives from lockdep.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
With f95f0f95cfb7("net, xdp: Introduce xdp_init_buff utility routine"),
buffer length could be stored as frame size so there's no need to have
a dedicated tun_xdp_hdr structure. We can simply store virtio net
header instead.
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20250701010352.74515-1-jasowang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are no users outside the module.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250630092639.1574860-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add defines for the values of the ECC_MODE field of the NAND_DEV0_ECC_CFG
register and change both the 'qcom-nandc' and 'spi-qpic-snand' drivers to
use those instead of magic numbers.
No functional changes. This is in preparation for adding 8 bit ECC strength
support for the 'spi-qpic-snand' driver.
Reviewed-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20250702-qpic-snand-8bit-ecc-v2-1-ae2c17a30bb7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Introduce file_getattr() and file_setattr() syscalls to manipulate inode
extended attributes. The syscalls takes pair of file descriptor and
pathname. Then it operates on inode opened accroding to openat()
semantics. The struct file_attr is passed to obtain/change extended
attributes.
This is an alternative to FS_IOC_FSSETXATTR ioctl with a difference
that file don't need to be open as we can reference it with a path
instead of fd. By having this we can manipulated inode extended
attributes not only on regular files but also on special ones. This
is not possible with FS_IOC_FSSETXATTR ioctl as with special files
we can not call ioctl() directly on the filesystem inode using fd.
This patch adds two new syscalls which allows userspace to get/set
extended inode attributes on special files by using parent directory
and a path - *at() like syscall.
CC: linux-api@vger.kernel.org
CC: linux-fsdevel@vger.kernel.org
CC: linux-xfs@vger.kernel.org
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Link: https://lore.kernel.org/20250630-xattrat-syscall-v6-6-c4e3bc35227b@kernel.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We intend to add support for more xflags to selective filesystems and
We cannot rely on copy_struct_from_user() to detect this extension.
In preparation of extending the API, do not allow setting xflags unknown
by this kernel version.
Also do not pass the read-only flags and read-only field fsx_nextents to
filesystem.
These changes should not affect existing chattr programs that use the
ioctl to get fsxattr before setting the new values.
Link: https://lore.kernel.org/linux-fsdevel/20250216164029.20673-4-pali@kernel.org/
Cc: Pali Rohár <pali@kernel.org>
Cc: Andrey Albershteyn <aalbersh@redhat.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Link: https://lore.kernel.org/20250630-xattrat-syscall-v6-5-c4e3bc35227b@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
Note that kernel.h is discouraged to be included as it's written
at the top of that file.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Currently fprobe events are registered when it is defined. Thus it will
give some overhead even if it is disabled. This changes it to register the
fprobe only when it is enabled.
Link: https://lore.kernel.org/all/174343537128.843280.16131300052837035043.stgit@devnote2/
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Allow user to set multiple tracepoint-probe events on the same
tracepoint. After the last tprobe-event is removed, the tracepoint
callback is unregistered.
Link: https://lore.kernel.org/all/174343536245.843280.6548776576601537671.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Merge series from David Lechner <dlechner@baylibre.com>:
Also there is a new dt-binding and driver for a special SPI offload
trigger FPGA IP core that is used in this particular setup.
|
|
Add support for adding GPIs to the event FIFO. This is done by adding
irq_chip support. Like this, one can use the input gpio_keys driver as a
"frontend" device and input handler.
As part of this change, we now implement .request() and .free() as we can't
blindly consume all available pins as GPIOs (example: some pins can be
used for forming a keymap matrix).
Also note that the number of pins can now be obtained from the parent,
top level device. Hence the 'max_gpio' variable can be removed.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-15-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The ADP558x family supports a built in keypad matrix decoder which can
be added as an Input device. In order to both support the Input and the
GPIO device, we need to create a bitmap of the supported pins and track
their usage since they can either be used as GPIOs (GPIs) or as part of
the keymap.
We also need to mark special pins busy in case some features are being
used (ex: pwm or reset events).
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-14-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The ADP558x family of devices can be programmed to respond to some
especial events, In case of the unlock events, one can lock the keypad
and use KEYS or GPIs events to unlock it. For the reset events, one can
again use a combinations of GPIs/KEYs in order to generate an event that
will trigger the device to generate an output reset pulse.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-13-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
These devices are capable of generate FIFO based events based on KEY or
GPI presses. Add support for handling these events. This is in
preparation of adding full support for keymap and gpis based events.
Reviewed-by: Lee Jones <lee@kernel.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-12-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Add support for the adp5589 I/O expander. From a PWM point of view it is
pretty similar to adp5585. Main difference is the address
of registers meaningful for configuring the PWM.
Acked-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-10-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Support the adp5589 I/O expander which supports up to 19 pins. We need
to add a chip_info based struct since accessing register "banks"
and "bits" differs between devices.
Also some register addresses are different.
While at it move ADP558X_GPIO_MAX defines to the main header file and
rename them. That information will be needed by the top level device in
a following change.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-9-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
There are some differences in the register map between the devices.
Hence, add a register structure per device. This will be needed in
following patches.
On top of that adp5585_fill_regmap_config() is renamed and reworked so
that the current struct adp5585_info act as template (they indeed
contain all the different data between variants) which can then be
complemented depending on the device (as identified by the id register).
This is done like this since a lot of the data is pretty much the same
between variants of the same device.
Reviewed-by: Lee Jones <lee@kernel.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-8-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The ADP5589 is a 19 I/O port expander with built-in keypad matrix decoder,
programmable logic, reset generator, and PWM generator.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-7-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The only thing changing between variants is the regmap default
registers. Hence, instead of having a regmap configuration for every
variant (duplicating lots of fields), add a chip info type of structure
with a regmap ID to identify which defaults to use and populate
regmap_config at runtime given a template plus the id. Also note that
between variants, the defaults can be the same which means the chip info
structure can be used in more than one compatible.
This will also make it simpler adding new chips with more variants.
Also note that the chip info structures are deliberately not const as
they will also contain lots of members that are the same between the
different devices variants and so we will fill those at runtime.
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-6-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Introduce new hooks for setting and getting filesystem extended
attributes on inode (FS_IOC_FSGETXATTR).
Cc: selinux@vger.kernel.org
Cc: Paul Moore <paul@paul-moore.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Link: https://lore.kernel.org/20250630-xattrat-syscall-v6-2-c4e3bc35227b@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This patch moves function related to file extended attributes
manipulations to separate file. Refactoring only.
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Link: https://lore.kernel.org/20250630-xattrat-syscall-v6-1-c4e3bc35227b@kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Renumber the NETFS_RREQ_* flags to put the most useful status bits in the
bottom nibble - and therefore the last hex digit in the trace output -
making it easier to grasp the state at a glance.
In particular, put the IN_PROGRESS flag in bit 0 and ALL_QUEUED at bit 1.
Also make the flags field in /proc/fs/netfs/requests larger to accommodate
all the flags.
Also make the flags field in the netfs_sreq tracepoint larger to
accommodate all the NETFS_SREQ_* flags.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250701163852.2171681-13-dhowells@redhat.com
Reviewed-by: Paulo Alcantara <pc@manguebit.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Netfslib has two functions for updating the i_size after a write: one for
buffered writes into the pagecache and one for direct/unbuffered writes.
However, what needs to be done is much the same in both cases, so merge
them together.
This does raise one question, though: should updating the i_size after a
direct write do the same estimated update of i_blocks as is done for
buffered writes.
Also get rid of the cleanup function pointer from netfs_io_request as it's
only used for direct write to update i_size; instead do the i_size setting
directly from write collection.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250701163852.2171681-12-dhowells@redhat.com
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Document the dma_pool_zalloc() wrapper.
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
[jc: fixed up dma_pool_alloc() reference in dmapool.h]
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20250627101015.1600042-5-ptesarik@suse.com
|
|
Add two variants of helper functions that calculate the correct number
of queues to use. Two variants are needed because some drivers base
their maximum number of queues on the possible CPU mask, while others
use the online CPU mask.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20250617-isolcpus-queue-counters-v1-2-13923686b54b@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
group_cpu_evenly() might have allocated less groups then requested:
group_cpu_evenly()
__group_cpus_evenly()
alloc_nodes_groups()
# allocated total groups may be less than numgrps when
# active total CPU number is less then numgrps
In this case, the caller will do an out of bound access because the
caller assumes the masks returned has numgrps.
Return the number of groups created so the caller can limit the access
range accordingly.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250617-isolcpus-queue-counters-v1-1-13923686b54b@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
