| Age | Commit message (Collapse) | Author |
|---|
|
Allow device attribute to reside in read-only memory.
Both const and non-const attributes are handled by the utility macros
and attributes can be migrated one-by-one.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20260512-sysfs-const-attr-device_attr-prep-v3-4-cb7c17b34d52@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The constification of device attributes will require a transition phase,
where 'struct device_attribute' contains a classic non-const and a new
const variant of the 'show' and 'store' callbacks.
As __ATTR() and friends can not handle this duplication stop using them.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20260512-sysfs-const-attr-device_attr-prep-v3-3-cb7c17b34d52@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For the upcoming constification of device attributes the generic
__ATTR() macros are insufficient.
Prepare for a split by introducing new low-level macros specific to
device attributes.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20260512-sysfs-const-attr-device_attr-prep-v3-2-cb7c17b34d52@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This macro is unused and would create extra work during the upcoming
constification of device attributes. Remove it.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20260512-sysfs-const-attr-device_attr-prep-v3-1-cb7c17b34d52@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When an overlay is applied, if the target device has already probed
successfully and bound to a device, then some of the fw_devlink logic
that ran when the device was probed needs to be rerun. This allows newly
created dangling consumers of the overlayed device tree nodes to be
moved to become consumers of the target device.
[Herve: Add the call to driver_deferred_probe_trigger()]
[Herve: Use fwnode_test_flag() to test fwnode flags value]
Fixes: 1a50d9403fb9 ("treewide: Fix probing of devices in DT overlays")
Reported-by: Herve Codina <herve.codina@bootlin.com>
Closes: https://lore.kernel.org/lkml/CAMuHMdXEnSD4rRJ-o90x4OprUacN_rJgyo8x6=9F9rZ+-KzjOg@mail.gmail.com/
Closes: https://lore.kernel.org/all/20240221095137.616d2aaa@bootlin.com/
Closes: https://lore.kernel.org/lkml/20240312151835.29ef62a0@bootlin.com/
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/lkml/20240411235623.1260061-3-saravanak@google.com/
[Herve: Rebase on top of recent kernel]
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Tested-by: Kalle Niemi <kaleposti@gmail.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260511155755.34428-3-herve.codina@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Constify the groups arrays, allowing to assign constant arrays.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/42624513-923c-4970-834d-036282e24e24@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Constify the groups arrays, allowing to assign constant arrays.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/265f6584-8edd-48a0-9568-a9d584b9ec3a@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
"struct class" is defined earlier on both cases.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Link: https://patch.msgid.link/6d5937c5-9d41-4cfe-9e42-0946e12dc72d@p183
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Quoting reporter:
A race between GRE keymap insertion and destruction can corrupt the
kernel list or use a freed object. `nf_ct_gre_keymap_add()` publishes a
new keymap pointer before the embedded `list_head` is linked, while
`nf_ct_gre_keymap_destroy()` can concurrently delete and free that
same object. An unprivileged user can reach this through the PPTP
conntrack helper by racing PPTP control messages or helper teardown,
leading to KASAN-detectable list corruption/UAF in kernel context.
## Root Cause Analysis
`exp_gre()` installs GRE expectations for a PPTP control flow and then
adds two GRE keymap entries [..]
The add path publishes `ct_pptp_info->keymap[dir]` before linking the
embedded list node [..]
Concurrent teardown deletes that partially initialized object.
Make add/destroy symmetric: install both, destroy both while under lock.
Furthermore, we should refuse to publish a new mapping in case ct is going
away, else we may leak the allocation.
The "retrans" detection is strange: existing mapping is checked for key
equality with the new mapping, then for "is on the list" via list walk.
But I can't see how an existing keymap entry can be NOT on list.
Change this to only check if we're asked to map same tuple again -- if so,
skip re-install, else signal failure.
Last, add a bug trap for the keymap list; it has to be empty when namespace
is going away.
Reported-by: Leo Lin <leo@depthfirst.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
|
|
If a firmware node is allocated on the stack (for instance: temporary
software node whose life-time we control) or on the heap - but using a
non-zeroing allocation function - and initialized using fwnode_init(),
its secondary pointer will contain uninitalized memory which likely will
be neither NULL nor IS_ERR() and so may end up being dereferenced (for
example: in dev_to_swnode()). Set fwnode->secondary to NULL on
initialization.
Cc: stable <stable@kernel.org>
Fixes: 01bb86b380a3 ("driver core: Add fwnode_init()")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20260506115701.23035-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The parport subsystem registers port devices before they are fully
initialised, resulting in a race condition where client drivers such
as lp can attach to ports that are not completely initialised or even
being torn down.
When the port and client drivers are built as modules and loaded
around the same time during boot, this occasionally results in a
crash. I was able to make this happen reliably in a VM with a
PC-style parallel port by patching parport_pc to fail probing:
> --- a/drivers/parport/parport_pc.c
> +++ b/drivers/parport/parport_pc.c
> @@ -2069,7 +2069,7 @@ static struct parport *__parport_pc_probe_port(unsigned long int base,
> if (!p)
> goto out3;
>
> - base_res = request_region(base, 3, p->name);
> + base_res = NULL;
> if (!base_res)
> goto out4;
>
and then running:
while true; do
modprobe lp & modprobe parport_pc
wait
rmmod lp parport_pc
done
for a few seconds.
In the long term I think port registration should be changed to put
the call to device_add() inside parport_announce_port(), but since the
latter currently cannot fail this will require changing all port
drivers.
For now, add a flag to indicate whether a port has been "announced"
and only try to attach client drivers to ports when the flag is set.
Fixes: 6fa45a226897 ("parport: add device-model to parport subsystem")
Closes: https://bugs.debian.org/1130365
Closes: https://lore.kernel.org/all/6ba903ad-9897-42bb-8c2d-337385cc3746@molgen.mpg.de/
Cc: stable <stable@kernel.org>
Signed-off-by: Ben Hutchings <benh@debian.org>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://patch.msgid.link/afo6uBv68GDevbMD@decadent.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Tracking in-flight inode wb switches with a single global counter
(isw_nr_in_flight) plus a synchronize_rcu() based wait in
cgroup_writeback_umount() forces every umount to take a global hit
whenever any other superblock on the system has wb switches in flight,
even if the superblock being unmounted has none of its own.
Replace the global synchronize_rcu()/flush_workqueue() pair with a
per-sb counter, s_isw_nr_in_flight, plus three small helpers:
- cgroup_writeback_pin(sb) - increment counter
- cgroup_writeback_unpin(sb) - decrement and wake drainer if last
- cgroup_writeback_drain(sb) - wait for counter to reach zero
The wiring is:
- inode_prepare_wbs_switch() pins before checking SB_ACTIVE and
grabbing the inode; failure paths unpin before returning. A
lockless SB_ACTIVE check at the top of the function lets us skip
the atomic_inc/smp_mb dance once SB_ACTIVE has been cleared (it
is monotonic and never set back).
- process_inode_switch_wbs() unpins after the matching iput().
- cgroup_writeback_umount() drains the per-sb counter via
wait_var_event().
The smp_mb() pair between inode_prepare_wbs_switch() and
cgroup_writeback_umount() keeps the SB_ACTIVE / counter ordering:
either the umounter sees a non-zero counter and waits, or the
switcher sees SB_ACTIVE cleared and aborts before grabbing the
inode.
The global isw_nr_in_flight is left in place, since it is still used
to throttle in-flight switches via WB_FRN_MAX_IN_FLIGHT.
The rcu_read_lock() extension in inode_switch_wbs() and
cleanup_offline_cgwb() that the race fix added is no longer needed
and is reverted; the synchronize_rcu() that the race fix added to
cgroup_writeback_umount() is dropped as well.
The following numbers were measured on a 16 vCPU QEMU guest with 4
background superblocks each churning "create memcg -> write 1 MiB ->
rmdir memcg" to keep the global isw_nr_in_flight non-zero. Latencies
are wall-clock around umount(8); only the target sb's umount is
measured.
Target sb runs its own cgwb churn:
p50 p95 p99 max
global synchronize_rcu() 67.6 ms 88.3 ms 88.3 ms 96.8 ms
per-sb counter (this) 7.9 ms 10.0 ms 10.0 ms 10.1 ms
Idle target umount latency under cross-sb cgwb-switch pressure:
p50 p95 p99 max
global synchronize_rcu() 62.7 ms 95.4 ms 108.1 ms 108.6 ms
per-sb counter (this) 5.3 ms 6.9 ms 7.4 ms 7.4 ms
no-pressure baseline 4.9 ms 5.9 ms 6.3 ms 6.7 ms
8 concurrent umounts of idle sbs under the same pressure:
p50 p95 max
global synchronize_rcu() 61.3 ms 99.5 ms 113.7 ms
per-sb counter (this) 8.1 ms 9.1 ms 9.5 ms
In-kernel cgroup_writeback_umount() time across the same run
(bpftrace, ~340 calls covering all scenarios):
global synchronize_rcu() 12371 ms total (~36 ms / call)
per-sb counter (this) 1.37 ms total ( ~4 us / call)
Suggested-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/177910456953.488929.2169908940676707307.b4-review@b4
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun@linux.alibaba.com>
Link: https://patch.msgid.link/20260521095016.2791354-4-libaokun@linux.alibaba.com
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
uart_handle_break() and uart_prepare_sysrq_char() (in
include/linux/serial_core.h) capture a SysRq character into
port->sysrq_ch while the port lock is held and rely on the unlock
helper -- uart_unlock_and_check_sysrq_irqrestore() -- to dispatch the
captured character to handle_sysrq() on scope exit.
The existing guard(uart_port_lock_irqsave) cannot be used by IRQ
handlers that process RX, because its destructor calls plain
uart_port_unlock_irqrestore() and silently drops port->sysrq_ch.
Add a dedicated guard(uart_port_lock_check_sysrq_irqsave) variant
whose destructor is the sysrq-aware unlock helper. The lock side is
identical to uart_port_lock_irqsave -- only the unlock-time behaviour
differs. Callers that may capture SysRq characters must use
guard(uart_port_lock_check_sysrq_irqsave); the existing
guard(uart_port_lock_irqsave) keeps its current plain-unlock semantics
for the many callers that do not process RX.
The new macro is placed after the CONFIG_MAGIC_SYSRQ_SERIAL block so
both definitions of uart_unlock_and_check_sysrq_irqrestore() (sysrq
enabled and disabled) are visible at expansion time. When
CONFIG_MAGIC_SYSRQ_SERIAL=n the destructor degenerates to plain
uart_port_unlock_irqrestore(), so there is no overhead.
No functional change on its own; users are converted in the following
patches.
Cc: stable@vger.kernel.org
Signed-off-by: Jacques Nilo <jnilo@free.fr>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/3849af4bc55d5d2a424fa850844e94d641b2f8a6.1778675349.git.jnilo@free.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The hot path in vc_process_ucs() asks two independent questions about the
same code point -- "is it double-width?" and "is it zero-width?" -- and
was answering each with its own bsearch over its own table. For anything
past the leading bounds check that meant two scans of the BMP width
tables back to back for what is logically a single lookup.
Replace both with one ucs_get_width(cp) returning 0, 1, or 2 in a single
bsearch, while keeping the total table footprint at the same 2384 B as
before.
To do so, merge the zero-width and double-width ranges per region into
one sorted-by-`first` table. BMP entries stay 4 bytes; per-entry width
is hosted in spare bits of the non-BMP table's `last` field. Non-BMP
code points use only 20 of 32 bits, so each u32 has 12 unused high bits.
Store first/last shifted left by 12 and use the low 12 bits of `last`
for metadata: bit 11 is this entry's own width flag, bits 0..7 host an
8-bit chunk of the BMP double-width bitmap. Because the metadata bits
sit strictly below the lowest cp-scale bit, the bsearch comparator
remains a plain u32 compare on shifted keys with no masking.
In vc_process_ucs() the overwhelmingly common single-width path now
collapses to a single predicted branch:
if (likely(w == 1))
return 1;
Note: scripts/checkpatch.pl complains about "Macros with complex values
should be enclosed in parentheses" for the BMP_*WIDTH and
RANGE_*WIDTH macros. They are deliberately defined to expand to a
comma-separated (first, last) pair so they can populate the two
adjacent fields of a struct initializer; wrapping them in
parentheses would turn that into a comma-expression and defeat
the whole construction. Please ignore.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Link: https://patch.msgid.link/20260515034857.2514225-1-nico@fluxnic.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The kernel documentation specifies that the console option 'r' can
be used to enable hardware flow control for console writes. The 8250
driver does include code for hardware flow control on the console if
cons_flow is set, but there is no code path that actually sets this.
However, that is not the only issue. The problems are:
1. Specifying the console option 'r' does not lead to cons_flow being
set.
2. Even if cons_flow would be set, serial8250_register_8250_port()
clears it.
3. When the console option 'r' is specified, uart_set_options()
attempts to initialize the port for CRTSCTS. However, afterwards
it does not set the UPSTAT_CTS_ENABLE status bit and therefore on
boot, uart_cts_enabled() is always false. This policy bit is
important for console drivers as a criteria if they may poll CTS.
4. Even though uart_set_options() attempts to initialize the port
for CRTSCTS, the 8250 set_termios() callback does not enable the
RTS signal (TIOCM_RTS) and thus the hardware is not properly
initialized for CTS polling.
5. Even if modem control was properly setup for CTS polling
(TIOCM_RTS), uart_configure_port() clears TIOCM_RTS, thus
breaking CTS polling.
6. wait_for_xmitr() and serial8250_console_write() use cons_flow
to decide if CTS polling should occur. However, the condition
should also include a check that it is not in RS485 mode and
CRTSCTS is actually enabled in the hardware.
Address all these issues as conservatively as possible by gating them
behind checks focussed on the user specifying console hardware flow
control support and the hardware being configured for CTS polling
at the time of the write to the UART.
Since checking the UPSTAT_CTS_ENABLE status bit is a part of the new
condition gate, these changes also support runtime termios updates to
disable/enable CRTSCTS.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://patch.msgid.link/20260511152706.151498-4-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
drivers-for-7.2
Merge the refactoring and helper functions in the Qualcomm GENI Serial
Engine driver through a topic branch.
These changes will provide the ability to add support managing power and
performance for the GENI instances in platforms where these are
controlled as SCMI resources.
The patches are merged through a topic branch to avoid conflicts with other
changes, while making them available to other subsystems.
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The GENI Serial Engine (SE) drivers (I2C, SPI, and SERIAL) currently
manage performance levels and operating points directly. This resulting
in code duplication across drivers. such as configuring a specific level
or find and apply an OPP based on a clock frequency.
Introduce two new helper APIs, geni_se_set_perf_level() and
geni_se_set_perf_opp(), addresses this issue by providing a streamlined
method for the GENI Serial Engine (SE) drivers to find and set the OPP
based on the desired performance level, thereby eliminating redundancy.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20260227061544.1785978-8-praveen.talari@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The GENI Serial Engine drivers (I2C, SPI, and SERIAL) currently handle
the attachment of power domains. This often leads to duplicated code
logic across different driver probe functions.
Introduce a new helper API, geni_se_domain_attach(), to centralize
the logic for attaching "power" and "perf" domains to the GENI SE
device.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20260227061544.1785978-7-praveen.talari@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The GENI SE protocol drivers (I2C, SPI, UART) implement similar resource
activation/deactivation sequences independently, leading to code
duplication.
Introduce geni_se_resources_activate()/geni_se_resources_deactivate() to
power on/off resources.The activate function enables ICC, clocks, and TLMM
whereas the deactivate function disables resources in reverse order
including OPP rate reset, clocks, ICC and TLMM.
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20260227061544.1785978-6-praveen.talari@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
The GENI Serial Engine drivers (I2C, SPI, and SERIAL) currently duplicate
code for initializing shared resources such as clocks and interconnect
paths.
Introduce a new helper API, geni_se_resources_init(), to centralize this
initialization logic, improving modularity and simplifying the probe
function.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20260227061544.1785978-4-praveen.talari@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
Add a new function geni_icc_set_bw_ab() that allows callers to set
average bandwidth values for all ICC (Interconnect) paths in a single
call. This function takes separate parameters for core, config, and DDR
average bandwidth values and applies them to the respective ICC paths.
This provides a more convenient API for drivers that need to configure
specific average bandwidth values.
Co-developed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Praveen Talari <praveen.talari@oss.qualcomm.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@kernel.org>
Link: https://lore.kernel.org/r/20260227061544.1785978-3-praveen.talari@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
|
|
This reverts commit db359fccf212 ("mm: introduce a new page type for page
pool in page type") and a part of 735a309b4bfb9e ("net: add net_iov_init()
and use it to initialize ->page_type").
Netpp page_type'ed pages might be used in mapping so as to use @_mapcount.
However, since @page_type and @_mapcount are union'ed in struct page,
these two can't be used at the same time. Revert the commit introducing
page_type for Netpp for now.
The patch will be retried once @page_type and @_mapcount get allowed to be
used at the same time.
The revert also includes removal of @page_type initialization part
introduced by commit 735a309b4bfb9e ("net: add net_iov_init() and use it
to initialize ->page_type"), which will be restored on the retry.
Link: https://lore.kernel.org/20260515034701.17027-1-byungchul@sk.com
Fixes: db359fccf212 ("mm: introduce a new page type for page pool in page type")
Signed-off-by: Byungchul Park <byungchul@sk.com>
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Closes: https://lore.kernel.org/all/982b9bc1-0a0a-4fc5-8e3a-3672db2b29a1@nvidia.com
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Harry Yoo (Oracle) <harry@kernel.org>
Reviewed-by: Lorenzo Stoakes <ljs@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Mark Bloch <mbloch@nvidia.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Simon Horman <horms@kernel.org>
Cc: Stanislav Fomichev <sdf@fomichev.me>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Cc: Toke Hoiland-Jorgensen <toke@redhat.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This reverts commit ea52cb24cd3f ("mm/hugetlbfs: update hugetlbfs to use
mmap_prepare") with conflict resolution to account for changes in commit
ea52cb24cd3f ("mm/hugetlbfs: update hugetlbfs to use mmap_prepare").
The patch incorrectly handled hugetlb VMA lock allocation at the
mmap_prepare stage, where a failed allocation occurring after mmap_prepare
is called might result in the lock leaking.
There is no risk of a merge causing a similar issues, as
VMA_DONTEXPAND_BIT is set for hugetlb mappings.
As a first step in addressing this issue, simply revert the change so we
can rework how we do this having corrected the underlying issues.
We maintain the VMA flags changes as best we can, accounting for the fact
that we were working with a VMA descriptor previously and propagating
like-for-like changes for this.
Note that we invoke vma_set_flags() and do not call vma_start_write() as
vm_flags_set() does. This is OK as it's being done in an .mmap hook where
the VMA is not yet linked into the tree so nobody else can be accessing
it.
Link: https://lore.kernel.org/20260512160643.266960-1-ljs@kernel.org
Fixes: ea52cb24cd3f ("mm/hugetlbfs: update hugetlbfs to use mmap_prepare")
Signed-off-by: Lorenzo Stoakes <ljs@kernel.org>
Reported-by: Mingyu Wang <25181214217@stu.xidian.edu.cn>
Closes: https://lore.kernel.org/linux-mm/20260425070700.562229-1-25181214217@stu.xidian.edu.cn/
Acked-by: Muchun Song <muchun.song@linux.dev>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Cross-merge networking fixes after downstream PR (net-7.1-rc5).
No conflicts, adjacent changes:
drivers/net/ethernet/mellanox/mlx5/core/en_txrx.c
cc199cd1b912 ("net/mlx5e: Reduce branches in napi poll")
c326f9c68921 ("net/mlx5e: xsk: Fix unlocked writing to ICOSQ")
drivers/net/ethernet/mellanox/mlx5/core/eswitch.c
c6df9a65cbb0 ("net/mlx5: Skip disabled vports when setting max TX speed")
1fba57c91416 ("net/mlx5: Add VHCA_ID page management mode support")
net/mac80211/mlme.c
a6e6ccd5bd07 ("wifi: mac80211: consume only present negotiated TTLM maps")
49e62ec6eb06 ("wifi: mac80211: move frame RX handling to type files")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix a typo "evetnfs files" to "eventfs files" in a comment.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://patch.msgid.link/20260507081041.885781-2-martin@kaiser.cx
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The trace_printk() macro uses a local variable _______STR to detect
whether variadic arguments are present. This name can shadow outer
variables.
Replace the local variable with sizeof applied directly to the
stringified arguments:
if (sizeof __stringify((__VA_ARGS__)) > 3)
This eliminates the shadowing risk entirely without introducing
any additional includes or local variables.
Verified with objdump on samples/trace_printk that all four cases
branch correctly: __trace_bputs, __trace_puts, __trace_bprintk,
and __trace_printk.
Link: https://patch.msgid.link/20260502075535.34997-1-tiffany019230@gmail.com
Suggested-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Qian-Yu Lin <tiffany019230@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The trace_##name##_enabled() static call branch is used when work needs to
be done for a tracepoint. It allows that work to be skipped when the
tracepoint is not active and still uses the static_branch() of the
tracepoint to keep performance.
Tracepoints themselves require being called in "RCU watching" locations
otherwise races can occur that corrupts things. In order to make sure
lockdep triggers at tracepoint locations, the lockdep checks are added to
the tracepoint calling location and trigger even if the tracepoint is not
enabled. This is done because a poorly placed tracepoint may never be
detected if it is never enabled when lockdep is enabled.
As trace_##name##_enabled() also prevents the lockdep checks when the
tracepoint is disabled add lockdep checks to that as well so that if one
is placed in a location that RCU is not watching, it will trigger a
lockdep splat even when the tracepoint is not enabled.
Cc: Vineeth Pillai (Google) <vineeth@bitbyteword.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://patch.msgid.link/20260430144159.10985-1-devnexen@gmail.com
Signed-off-by: David Carlier <devnexen@gmail.com>
[ Updated the change log ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, wireless and netfilter.
Craziness continues with no end in sight. Even discounting the driver
revert this is a pretty huge PR for standards of the previous era. I'd
speculate - we haven't seen the worst of it, yet. Good news, I guess,
is that so far we haven't seen many (any?) cases of "AI reported a
bug, we fixed it and a real user regressed".
Current release - fix to a fix:
- Bluetooth: btmtk: accept too short WMT FUNC_CTRL events
- vsock/virtio: relax the recently added memory limit a little
Current release - regressions:
- IB/IPoIB: make sure IB drivers always use async set_rx_mode since
some (mlx5) are now required to use it due to locking changes
Previous releases - regressions:
- udp: fix UDP length on last GSO_PARTIAL segment
- af_unix: fix UAF read of tail->len in unix_stream_data_wait()
- tcp: fix stale per-CPU tcp_tw_isn leak enabling ISN prediction
- mlx5e: fix unlocked writing to ICOSQ, breaking AF_XDP
Previous releases - always broken:
- tap: fix stack info leak in tap_ioctl() SIOCGIFHWADDR
- ipv4: raw: reject IP_HDRINCL packets with ihl < 5
- Bluetooth: a lot of locking and concurrency fixes (as always)
- batman-adv (mesh wireless networking): a lot of random fixes for
issues reported by security researchers and Sashiko
- netfilter: same thing, a lot of small security-ish fixes all over
the place, nothing really stands out
Misc:
- bring back the old 3c509 driver, Maciej wants to maintain it"
* tag 'net-7.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (187 commits)
net: enetc: avoid VF->PF mailbox timeout during SR-IOV teardown
net: enetc: fix init and teardown order to prevent use of unsafe resources
net: enetc: fix unbounded loop and interrupt handling in VF-to-PF messaging
net: enetc: fix DMA write to freed memory in enetc_msg_free_mbx()
net: enetc: fix race condition in VF MAC address configuration
net: enetc: fix TOCTOU race and validate VF MAC address
net: enetc: add ratelimiting to VF mailbox error messages
net: enetc: fix missing error code when pf->vf_state allocation fails
net: enetc: fix incorrect mailbox message status returned to VFs
net: bridge: prevent too big nested attributes in br_fill_linkxstats()
l2tp: use list_del_rcu in l2tp_session_unhash
net: bcmgenet: keep RBUF EEE/PM disabled
ethernet: 3c509: Fix most coding style issues
ethernet: 3c509: Update documentation to match MAINTAINERS
ethernet: 3c509: Add GPL 2.0 SPDX license identifier
ethernet: 3c509: Fix AUI transceiver type selection
Revert "drivers: net: 3com: 3c509: Remove this driver"
tools: ynl: support listening on all nsids
net: gro: don't merge zcopy skbs
pds_core: ensure null-termination for firmware version strings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
- Permit ACPI PRM runtime firmware calls when acpi_init() runs
- Add another Lenovo Ideapad framebuffer quirk
- Cosmetic tweak
* tag 'efi-fixes-for-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: sysfb_efi: Extend quirk to cover IdeaPad Duet 3 10IGL5-LTE
efi: efi.h: Remove extra semicolon
efi: Allocate runtime workqueue before ACPI init
|
|
AMD Promontory 21 (PROM21) xHCI PCI functions use the common xhci-pci
core for USB operation, but also expose controller-specific sensor data.
Add a small PROM21 PCI glue driver for AMD 1022:43fc and 1022:43fd
controllers.
The glue delegates USB host operation to the common xhci-pci core and
publishes a "hwmon" auxiliary device with parent-provided MMIO data.
Auxiliary device creation failure is logged but does not fail the xHCI
probe.
Make the PROM21 glue a hidden Kconfig tristate driven by the user-visible
SENSORS_PROM21_XHCI option. If sensor support is disabled, generic
xhci-pci binds PROM21 controllers normally. If sensor support is enabled,
the glue follows USB_XHCI_PCI.
This keeps the auxiliary device available for a modular sensor driver while
avoiding a built-in xhci-pci core handing PROM21 controllers to a glue
driver that is only available as a module during initramfs.
Assisted-by: Codex:gpt-5.5
Signed-off-by: Jihong Min <hurryman2212@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20260519000732.2334711-2-hurryman2212@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The hid_warn_ratelimited macro is defined twice in include/linux/hid.h:
- first one added by commit 4051ead99888 ("HID: rate-limit hid_warn to
prevent log flooding")
- second one added by commit 1d64624243af ("HID: core: Add
printk_ratelimited variants to hid_warn() etc")).
The second definition is correctly grouped with other ratelimited macros.
Remove the duplicate definition.
Fixes: 1d64624243af ("HID: core: Add printk_ratelimited variants to hid_warn() etc")
Signed-off-by: Liu Kai <lukace97@outlook.com>
[bentiss: edited commit message]
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
|
|
This flag indicates the path should be opened if it's a regular file.
This is useful to write secure programs that want to avoid being
tricked into opening device nodes with special semantics while thinking
they operate on regular files. This is a requested feature from the
uapi-group[1].
The previously introduced EFTYPE error code is returned when the path
doesn't refer to a regular file. For example, if openat2 is called on
path /dev/null with OPENAT2_REGULAR in the flag param, it will return
-EFTYPE.
When used in combination with O_CREAT, either the regular file is
created, or if the path already exists, it is opened if it's a regular
file. Otherwise, -EFTYPE is returned.
When OPENAT2_REGULAR is combined with O_DIRECTORY, -EINVAL is returned
as it doesn't make sense to open a path that is both a directory and a
regular file.
The UAPI bit lives in the upper 32 bits of open_how::flags
(((__u64)1 << 32)) so that open(2) and openat(2) -- whose @flags
argument is a C int -- cannot physically express it. This is a
structural guarantee, not a runtime mask: the bit is unrepresentable in
32 bits.
Because the rest of the VFS open path narrows to 32 bits in several
places (op->open_flag, f->f_flags, the unsigned open_flag argument of
i_op->atomic_open()), build_open_flags() translates OPENAT2_REGULAR
into a kernel-internal lower-32-bit carrier __O_REGULAR (bit 4, unused
as an O_* on every architecture) before the assignment to op->open_flag.
__O_REGULAR then rides through the existing channels exactly like
__FMODE_EXEC. do_dentry_open() strips it so it cannot leak back to
userspace via fcntl(F_GETFL).
Four BUILD_BUG_ON_MSG() invariants in build_open_flags() prevent any
future bit collision or accidental low-32 redefinition:
- VALID_OPEN_FLAGS fits in 32 bits.
- OPENAT2_REGULAR lives in the upper 32 bits.
- OPENAT2_REGULAR does not alias any open()/openat() flag.
- __O_REGULAR does not alias any user-visible flag.
[1]: https://uapi-group.org/kernel-features/#ability-to-only-open-regular-files
Christian Brauner <brauner@kernel.org> says:
Move OPENAT2_REGULAR to the upper 32 bits of open_how::flags with a
kernel-internal __O_REGULAR carrier so that open(2)/openat(2) cannot
encode the flag; add BUILD_BUG_ON_MSG() invariants and register
__O_REGULAR in the fcntl_init() allocation-uniqueness BUILD_BUG_ON()
(bit count 21 -> 22).
Signed-off-by: Dorjoy Chowdhury <dorjoychy111@gmail.com>
Link: https://patch.msgid.link/20260328172314.45807-2-dorjoychy111@gmail.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Aleksa Sarai <aleksa@amutable.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Not all USB4/TB implementations are based on a PCIe-attached
controller. In order to make way for these, start off with moving the
pci_device reference out of the main tb_nhi structure.
Encapsulate the existing struct in a new tb_nhi_pci, that shall also
house all properties that relate to the parent bus. Similarly, any
other type of controller will be expected to contain tb_nhi as a
member.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This function is entirely unused, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260511072239.2456725-3-hch@lst.de
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
The SPI controller API is asymmetric in that a controller is allocated
and registered in two step, while it is freed as part of deregistration.
[1]
This is especially unfortunate as any driver data is freed along with
the controller, something which has lead to use-after-free bugs during
deregistration when drivers tear down resources after deregistering the
controller (or tear down resources that may still be in use before
deregistering the controller in an attempt to work around the API).
To reduce the risk of such bugs being introduced a device managed
allocation interface was added, but this arguably made things even less
consistent as now whether the controller gets freed as part of
deregistration depends on how it was allocated. [2][3]
With most drivers converted to use managed allocation in preparation for
fixing the API, the remaining 16 drivers can be converted in one
tree-wide change. Ten of those drivers use the bitbang interface and can
be converted by simply removing the extra reference already taken by
spi_bitbang_start() (and updating the two bitbang drivers that use
managed allocation). [4]
Fix the API inconsistency by no longer dropping a reference when
deregistering non-devres allocated controllers.
[1] 68b892f1fdc4 ("spi: document odd controller reference handling")
[2] 5e844cc37a5c ("spi: Introduce device-managed SPI controller allocation")
[3] 3f174274d224 ("spi: fix misleading controller deregistration kernel-doc")
[4] 702a4879ec33 ("spi: bitbang: Let spi_bitbang_start() take a reference to master")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260521073816.766596-1-johan@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Each user port of the NETC switch supports 802.3 basic and mandatory
managed objects statistic counters and IETF Management Information
Database (MIB) package (RFC2665) and Remote Network Monitoring (RMON)
counters. And all of these counters are 64-bit registers. In addition,
some user ports support preemption, so these ports have two MACs, MAC
0 is the express MAC (eMAC), MAC 1 is the preemptible MAC (pMAC). So
for ports that support preemption, the statistics are the sum of the
pMAC and eMAC statistics.
Note that the current switch driver does not support preemption, all
frames are sent and received via the eMAC by default. The statistics
read from the pMAC should be zero.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-15-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The NXP NETC switch tag is a proprietary header added to frames after the
source MAC address. The switch tag has 3 types, and each type has 1 ~ 4
subtypes, the details are as follows.
Forward NXP switch tag (Type=0): Represents forwarded frames.
- SubType = 0 - Normal frame processing.
To_Port NXP switch tag (Type=1): Represents frames that are to be sent
to a specific switch port.
- SubType = 0. No request to perform timestamping.
- SubType = 1. Request to perform one-step timestamping.
- SubType = 2. Request to perform two-step timestamping.
- SubType = 3. Request to perform both one-step timestamping and
two-step timestamping.
To_Host NXP switch tag (Type=2): Represents frames redirected or copied
to the switch management port.
- SubType = 0. Received frames redirected or copied to the switch
management port.
- SubType = 1. Received frames redirected or copied to the switch
management port with captured timestamp at the switch port where
the frame was received.
- SubType = 2. Transmit timestamp response (two-step timestamping).
In addition, the length of different type switch tag is different, the
minimum length is 6 bytes, the maximum length is 14 bytes. Currently,
Forward tag, SubType 0 of To_Port tag and Subtype 0 of To_Host tag are
supported. More tags will be supported in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-10-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ingress port filter table (IPFT )contains a set of filters each
capable of classifying incoming traffic using a mix of L2, L3, and L4
parsed and arbitrary field data. As a result of a filter match, several
actions can be specified such as on whether to deny or allow a frame,
overriding internal QoS attributes associated with the frame and setting
parameters for the subsequent frame processing functions, such as stream
identification, policing, ingress mirroring. Each entry corresponds to a
filter. The ingress port filter entries are added using a precedence
value. If a frame matches multiple entries, the entry with the higher
precedence is used. Currently, this patch only adds "Add" and "Delete"
operations to the ingress port filter table. These two interfaces will
be used by both ENETC driver and NETC switch driver.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-8-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The buffer pool table contains buffer pool configuration and operational
information. Each entry corresponds to a buffer pool. The Entry ID value
represents the buffer pool ID to access.
The buffer pool table is a static bounded index table, buffer pools are
always present and enabled. It only supports Update and Query operations,
This patch only adds ntmp_bpt_update_entry() helper to support updating
the specified entry of the buffer pool table. Query action to the table
will be added in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-7-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The VLAN filter table contains configuration and control information for
each VLAN configured on the switch. Each VLAN entry includes the VLAN
port membership, which FID to use in the FDB lookup, which spanning tree
group to use, the egress frame modification actions to apply to a frame
exiting form this VLAN, and various configuration and control parameters
for this VLAN.
The VLAN filter table can only be managed by the command BD ring using
table management protocol version 2.0. The table supports Add, Delete,
Update and Query operations. And the table supports 3 access methods:
Entry ID, Exact Match Key Element and Search. But currently we only add
the ntmp_vft_add_entry() helper to support the upcoming switch driver to
add an entry to the VLAN filter table. Other interfaces will be added in
the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-6-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The FDB table is used for MAC learning lookups and MAC forwarding lookups.
Each table entry includes information such as a FID and MAC address that
may be unicast or multicast and a forwarding destination field containing
a port bitmap identifying the associated port(s) with the MAC address.
FDB table entries can be static or dynamic. Static entries are added from
software whereby dynamic entries are added either by software or by the
hardware as MAC addresses are learned in the datapath.
The FDB table can only be managed by the command BD ring using table
management protocol version 2.0. Table management command operations Add,
Delete, Update and Query are supported. And the FDB table supports three
access methods: Entry ID, Exact Match Key Element and Search. This patch
adds the following basic supports to the FDB table.
ntmp_fdbt_update_entry() - update the configuration element data of a
specified FDB entry
ntmp_fdbt_delete_entry() - delete a specified FDB entry
ntmp_fdbt_add_entry() - add an entry into the FDB table
ntmp_fdbt_search_port_entry() - Search the FDB entry on the specified
port based on RESUME_ENTRY_ID.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20260518082506.1318236-5-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Several DRM drivers already define their own constants for minimum and
maximum TMDS character rates.
By defining common rate constants in a shared header, drivers can just use
them instead of having driver local define macros or use magic numbers.
The values defined in the <linux/hdmi.h> header correspond to maximum TMDS
character rates defined by each HDMI specification version:
- HDMI_TMDS_CHAR_RATE_MIN_HZ: 25 MHz (minimum for all versions)
- HDMI_1_0_TMDS_CHAR_RATE_MAX_HZ: 165 MHz (HDMI 1.0 maximum)
- HDMI_1_3_TMDS_CHAR_RATE_MAX_HZ: 340 MHz (HDMI 1.3 maximum)
- HDMI_2_0_TMDS_CHAR_RATE_MAX_HZ: 600 MHz (HDMI 2.0 maximum)
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260520144424.1633354-2-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
|
|
To get an operable version of an O_PATH file descriptor, it is possible
to use openat(fd, ".", O_DIRECTORY) for directories, but other files
currently require going through open("/proc/<pid>/fd/<nr>"), which
depends on a functioning procfs.
This patch adds the O_EMPTYPATH flag to openat(2)/openat2(2). If passed,
LOOKUP_EMPTY is set at path resolution time.
Note: This implies that you cannot rely anymore on disabling procfs from
being mounted (e.g. inside a container without procfs mounted and with
CAP_SYS_ADMIN dropped) to prevent O_PATH fds from being re-opened
read-write.
Signed-off-by: Jori Koolstra <jkoolstra@xs4all.nl>
Link: https://patch.msgid.link/20260424114611.1678641-2-jkoolstra@xs4all.nl
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
There is legacy 'extern' keyword for the exported simple_strtox()
function which are the artefact that can be removed. So drop it.
While at it, tweak the declaration to provide parameter names.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260331070519.5974-7-ddiss@suse.de
Reviewed-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
No users anymore and none should be in the first place.
This reverts commit fcc155008a20fa31b01569e105250490750f0687.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260331070519.5974-6-ddiss@suse.de
Acked-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The mdacon driver supports using ISA MDA or Hercules-compatible display
adapters as a secondary text console. This was commonly used in the
1990s and earlier for debugging software which took over the primary
display. It is highly unlikely anyone is doing so nowadays because
serial consoles and much better methods of debugging exist.
The driver is not enabled by any defconfig, nor any of the
dozens of distro configs collected at [1]. It has been relegated to VTs
13-16 since commit 0b9cf3aa6b1e ("mdacon messing up default vc's - set
default to vc13-16 again") in Linux 2.6.27 (and before Linux 2.5.53 -
see the link in the message of the above commit). The change in 2.6.27
was done because it was incorrectly detecting non-MDA adapters as MDA
and taking over all VTs, rendering them unusable.
Furthermore, vgacon supports using MDA/Hercules-compatible adapters as
the primary text console, so any systems with only one of these
adapters were already using vgacon and will not experience any loss in
functionality from the removal of this driver.
Given all of these factors, the mdacon driver is likely entirely
unused. Remove it.
[1] https://github.com/nyrahul/linux-kernel-configs/tree/f0bee86a135a0406ea427855f52702dd00d770f9
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Since "vfio/pci: Set up barmap in vfio_pci_core_enable()", the
resource request and iomap for the BARs was performed early, and
vfio_pci_core_setup_barmap() just checks those actions succeeded.
Move this logic to a new helper that checks success and returns the
iomap address, replacing the various bare vdev->barmap[] lookups.
This maintains the error behaviour of the previous on-demand
vfio_pci_core_setup_barmap() scheme.
Signed-off-by: Matt Evans <mattev@meta.com>
Link: https://lore.kernel.org/r/20260511145829.2993601-4-mattev@meta.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
|
|
The ldo_vcn33_[12]_wifi and ldo_vcn33_[12]_bt are just two regulator
outputs instead of four. The wifi and bt parts refer to separate enable
bits that are OR-ed together to affect the actual regulator output. The
separate bits allow the wifi and bt stacks to enable their power without
coordination between them. These have been deprecated in favor of proper
nodes matching the output.
Add proper ldo_vcn33_[12] regulators to replace the existing ones. The
enable status is synced to just one of the two enable bits, and the
other is forced off. This makes the handling in other bits simpler.
The existing *_(bt|wifi) regulators are converted to no-op regulators
that are fed from their new respective ldo_vcn33_[12] regulator. This
allows existing device trees to continue to work.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patch.msgid.link/20260514091520.2718987-7-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
__bf_shf() is currently based on built-in ffsll. It's more
straightforward to wire it to __builtin_ctzll, which makes it a pure
rename.
Worth to notice that __builtin_ffsll() is buggy on GCC before 14.1:
int main() {
sizeof(struct {
int t : !(__builtin_ffsll(~0ULL) + 1 < 0);
});
}
test.c: In function 'main':
test.c:3:21: error: bit-field 't' width not an integer constant
3 | int t : !(__builtin_ffsll(~0ULL) + 1 < 0);
| ^
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=124699
Reported-by: Matt Coster <matt.coster@imgtec.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603222211.A2XiR1YU-lkp@intel.com/
Signed-off-by: Yury Norov <ynorov@nvidia.com>
|
|
The bitfields are designed in assumption that fields contain unsigned
integer values, thus extracting the values from the field implies
zero-extending.
Some drivers need to sign-extend their fields, and currently do it like:
dc_re += sign_extend32(FIELD_GET(0xfff000, tmp), 11);
dc_im += sign_extend32(FIELD_GET(0xfff, tmp), 11);
It's error-prone because it relies on user to provide the correct
index of the most significant bit and proper 32 vs 64 function flavor.
Thus, introduce a FIELD_GET_SIGNED(). With the new API, the above
snippet turns into the more convenient:
dc_re += FIELD_GET_SIGNED(0xfff000, tmp);
dc_im += FIELD_GET_SIGNED(0xfff, tmp);
It compiles (on x86_64) into just a couple instructions: shl and sar.
When the mask includes MSB, the '<< __builtin_clzll(mask)' part becomes
a NOP, and the compiler only emits a single sar:
long long foo(long long reg)
{
10: f3 0f 1e fa endbr64
return FIELD_GET_SIGNED(GENMASK_ULL(63, 60), reg);
14: 48 89 f8 mov %rdi,%rax
17: 48 c1 f8 3c sar $0x3c,%rax
}
32-bit code generation is equally well. On arm32:
long long foo(long long reg)
{
return FIELD_GET_SIGNED(0x00f00000ULL, reg);
}
generates:
foo(long long):
lsls r1, r0, #8
asrs r0, r1, #28
asrs r1, r1, #31
bx lr
Signed-off-by: Yury Norov <ynorov@nvidia.com>
|
