| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"binfmt_misc:
- Don't let an 'F' entry pin its own instance.
An entry registered with 'F' opens its interpreter at registration
time and holds that file until the entry is freed, so an entry
nobody removes by hand is only closed once the binfmt_misc
superblock is shut down.
If the interpreter lives on a mount that keeps that superblock
alive the two pin each other and the file is never closed. That's
reachable by pointing the interpreter at the instance itself or by
using the instance as an overlayfs lower layer, and once the mount
namespace is gone there's nothing left to unregister through
either.
- Restore write access when removing an entry.
Registering with the MISC_FMT_OPEN_FILE flag opens the interpreter
via open_exec() which denies write access for as long as the entry
exists, but removal only did filp_close() and never restored it.
The inode's i_writecount stayed permanently negative and opening
the interpreter for writing kept failing with ETXTBSY long after
the entry was gone.
- Use exe_file_deny_write_access() for the interpreter clone so both
sides base their decision on the same mode.
- Reject a flag character as the field delimiter. create_entry() pads
the buffer with the delimiter so the field parsers terminate even
on a truncated string, but check_special_flags() consumes flag
characters instead of scanning for the delimiter.
If the delimiter is itself a flag character the padding stops
acting as a terminator and the scan keeps reading past the end of
the allocation. Such a registration was always rejected, just only
after the out of bounds read has already happened.
- Don't leak the user namespace when the mount fails.
bm_get_tree() hands its reference to get_tree_keyed() and sget_fc()
moves it into sb->s_fs_info, but generic_shutdown_super() only
calls ->put_super() from inside the if (sb->s_root) branch and
bm_fill_super() can fail before either s_root or s_op is in place.
Drop the reference in ->kill_sb() instead, which runs
unconditionally.
netfs:
- Clear PG_private_2 on a copy-to-cache append failure.
- Handle a rolling buffer allocation failure in single-object
writeback and drop the extra folio reference
netfs_write_folio_single() took before the append.
- Release the previously batched readahead folios when
rolling_buffer_load_from_ra() fails in
netfs_prepare_read_iterator()
- Fix the folio_queue ENOMEM in writeback by adding a mempool and
passing gfp flags into the rolling buffer helpers.
iomap:
- Add a separate bio_set for iomap_split_ioend(). It can split bios
that already come from iomap_ioend_bioset and deadlock once that
bioset is exhausted.
afs:
- Set call->async for an asynchronous afs_fs_fetch_data() the way
afs_fs_fetch_data64() already does.
- Subtract subreq->transferred from subreq->len in
afs_fs_fetch_data() rather than adding it.
- Fix a UAF when sending a message"
* tag 'vfs-7.2-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: add a separate bio_set for iomap_split_ioend
binfmt_misc: don't leak the user namespace when the mount fails
binfmt_misc: reject a flag character as the field delimiter
binfmt_misc: use exe_file_deny_write_access() for the interpreter clone
binfmt_misc: restore write access when removing an entry
binfmt_misc: don't let an 'F' entry pin its own instance
netfs: Fix folio_queue ENOMEM in writeback by adding a mempool
netfs: release readahead folios on iterator preparation failure
netfs: handle single writeback rolling buffer allocation failure
netfs: clear PG_private_2 on copy-to-cache append failure
afs: Fix UAF when sending a message
afs: Fix afs_fs_fetch_data() to subtract transferred from len
afs: Fix afs_fs_fetch_data() to set call->async
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- switchtec fix for register programming
- sun6i descriptor reclaim fix
- Intel idxd fixes for double free in error and setup failure
- Qualcomm bam dma command element fix
* tag 'dmaengine-fix-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: qcom: bam_dma: Fix command element mask field for BAM v1.6.0+
dmaengine: idxd: fix fdev setup failure cleanup in idxd_cdev_open()
dmaengine: idxd: fix double free of wq, engine, and group structs
dmaengine: sun6i-dma: Fix reclaim descriptors while terminating DMA
dmaengine: switchtec-dma: fix FIELD_GET misuse when programming SE threshold
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fixes from Damien Le Moal:
- Fix PCI resource initialization in the sata_mv driver to keep legacy
Marvell boards functional (Rosen)
- Fix ahci_ceva driver initialization error path (Radhey)
- Fix libata header file to remove a kernel doc compilation warning
(Randy)
- Increase the timeout for the STANDBY IMMEDIATE command to avoid
suspend failures with drives that are slow to respond to this command
(Matt)
- Fixes for the handling of timed out commands in the presence of
deferred non-NCQ commands, to avoid excessive delays in executing the
error handler (me)
- Disable link power management for a couple of WD drives that have
been identified as not functioning properly when power management is
used (Niklas)
- Fix the device iteration loop when checking for link power management
support to correctly handle port multiplier setups (Niklas)
* tag 'ata-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-sata: fix ata_scsi_lpm_supported() iteration
ata: libata-core: Disable LPM on WD Green 2.5 480GB
ata: libata-core: Disable LPM on some WD drives
scsi: libsas: terminate deferred commands on time out
ata: libata-scsi: schedule deferred atapi command
ata: libata-scsi: terminate deferred commands on time out
ata: libata-eh: Increase STANDBY IMMEDIATE timeout
ata: libata: avoid kernel-doc warnings
ata: ahci_ceva: fix error paths in ceva_ahci_platform_enable_resources()
ata: sata_mv: accept 1 or 2 resources in platform probe
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"Several bug fixes found by tools and fuzzing:
- Incorrect domain passed during replace to ack faults
- Block the access API from using dmabuf
- Missing unlock on error unwind
- Race seeing a partially setup vdevice in the xarray
- Do not allow vdevices to have multiple stream ids in SMMUv3
- Possible UAF if racing faults with domain changes"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu/iommufd: Fix IOPF group ownership UAF
iommu/arm-smmu-v3-iommufd: Require exactly one Stream ID for a vDEVICE
iommufd/viommu: Publish a vDEVICE only after vdevice_init() succeeds
iommufd/viommu: Release the igroup lock on the vdevice_size error path
iommufd: Reject DMABUF pages from the access pin path
iommufd: Fix wrong hwpt passed to iommufd_auto_response_faults on replace
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"This is again larger than usual: the backlog accumulated in the past weeks
is not done yet. I'm not aware of any known pending regression.
Including fixes from netfilter, Bluetooth, WiFi and CAN.
Current release - regressions:
- bluetooth: remove unnecessary hci_conn_get in create_conn_sync
- can: isotp: fix timer drain order, wakeup handling and tx_gen
ordering
- eth:
- tun/vhost: revert avoid ptr_ring tail-drop when a qdisc is
present
Previous releases - regressions:
- core: do not send ICMP/NDISC Redirects when peer allocation fails
- ipv6: take nexthop lock for f6i_list walks in replace check and
notify
- wifi: fix an ath12k MLO regression impacting WCN7850/QCC2072.
- netfilter: nf_tables: make nft_object rhltable per table
- af_unix: fix listen() succeeding on sockets in the wrong state
- openvswitch: fix potential UAF on meter attach failure
- bluetooth:
- fix advertising data UAFs
- avoid deadlocks in iso_sock_timeout
- smc: fix socket use-after-free during link group termination
- dpll: use pin owner's dpll ref for pin-level attribute reporting
- eth:
- veth: convert frag_list skbs before running XDP
- ice: wait for reset completion in ice_resume()
- igc: remove napi_synchronize() in igc_down()
- vxlan: use pskb_network_may_pull() for transmit path header pulls
Previous releases - always broken:
- xsk: fix AF_XDP multi-buffer Tx descriptor reclaim
- psp: fix NULL genl_sock deref race with concurrent netns teardown
- netfilter: widen NAT rewrite delta to s32 in sip_help_tcp()
- can: peak_usb: fix double free of transfer buffer on URB submit error
- dibs: fix use-after-free of dmb_node in loopback attach/detach/unregister
- sctp: prevent peer transport count overflow
- dsa: mt7530: error out on failed reads in MT7531 PHY polling
- eth:
- idpf: bound interrupt-vector register fill to the allocated array"
* tag 'net-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (156 commits)
qede: sync udp_tunnel ports outside qede_lock in the recovery path
net: openvswitch: fix potential UAF on meter attach failure
octeontx2-pf: Set correct sequence for carrier off and tx queue stop
net: libwx: fix FDIR ATR queue mismatch for software VLAN packets
net: dsa: realtek: use devm_mutex_init for l2_lock
net: dsa: realtek: use devm_mutex_init for vlan_lock
net: dsa: realtek: use devm_mutex_init for regmap lock
net: dsa: realtek: rtl8365mb: use devm_mutex_init for mib_lock
ptp: netc: fix potential interrupt storm caused by incorrect unbind order
net: mana: Return error code from mana_create_rxq()
net: openvswitch: fix skb leak on flow key update failure during ct
net: openvswitch: fix skb leak on flow key update failure during recirculation
net: stmmac: Fix E2E delay mechanism
net: dsa: mt7530: error out on failed reads in MT7531 PHY polling
net: dsa: mt7530: error out on failed reads in ATC/VTCR command polling
net: dsa: mt7530: check bus->read() errors in the MDIO regmap backend
Revert "tun/tap: add ptr_ring consume helper with netdev queue wakeup"
Revert "vhost-net: wake queue of tun/tap after ptr_ring consume"
Revert "ptr_ring: move free-space check into separate helper"
Revert "tun/tap & vhost-net: avoid ptr_ring tail-drop when a qdisc is present"
...
|
|
This reverts commit baf808fe4fcd35767ab732b4ab2ea80dabfd97a6.
There is no netdev queue left to wake after reverting
commit 1d6e569b7d0c ("tun/tap & vhost-net: avoid ptr_ring tail-drop
when a qdisc is present").
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260728092240.250257-4-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit fba362c17d9d9211fc51f272156bb84fc23bdf98.
__ptr_ring_check_produce() has no users left after reverting
commit 1d6e569b7d0c ("tun/tap & vhost-net: avoid ptr_ring tail-drop
when a qdisc is present").
Signed-off-by: Simon Schippers <simon.schippers@tu-dortmund.de>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260728092240.250257-3-simon.schippers@tu-dortmund.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
If a command times out while we have deferred non-NCQ commands waiting to
be issued, the SCSI EH task is not immediately woken up as the waiting
deferred commands are never issued nor completed, thus leaving the SCSI
host in a busy state (shost->host_failed != scsi_host_busy(shost)) which
prevents the SCSI EH task from being woken up. Eventually, when the
deferred commands also time out, the SCSI EH task is woken up and the
timeout processing occurs.
Avoid this unnecessary additional SCSI EH wake up time with the same
method as implemented in libata-scsi, using the eh_timed_out SCSI host
template operation. The function sas_eh_timed_out() implements this
operation and executes the function ata_scsi_retry_deferred_qc()
for SATA devices.
Co-developed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Tested-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
If a command times out while we have deferred non-NCQ commands waiting to
be issued, the SCSI EH task is not immediately woken up as the waiting
deferred commands are never issued nor completed, thus leaving the SCSI
host in a busy state (shost->host_failed != scsi_host_busy(shost)) which
prevents the SCSI EH task from being woken up. Eventually, when the
deferred commands also time out, the SCSI EH task is woken up and the
timeout processing occurs.
Avoid this unnecessary SCSI EH task wake-up additional time by scheduling
a retry of all waiting deferred QCs, using the eh_timed_out SCSI host
template operation. The function ata_scsi_eh_timed_out() is introduced to
implement this operation.
However, terminating deferred commands with DID_REQUEUE to force a retry
by calling the function ata_scsi_requeue_deferred_qc() may still keep the
SCSI host in a busy state because the block layer may immediately re-issue
these commands. The solution to this is to schedule libata EH for the
port which suffered the command timeout to prevent accepting any new
command. ata_scsi_requeue_deferred_qc() is modified to add a call to
ata_port_schedule_eh() for this purpose.
In addition to this change, ata_scsi_requeue_deferred_qc() is also
modified to take a new timedout_scmd scsi command argument which indicates
the SCSI command that timed out. With this additional argument,
ata_scsi_requeue_deferred_qc() can now also terminate with DID_TIME_OUT
any timed out deferred qc, which simplifies ata_scsi_cmd_error_handler().
In this case, ata_scsi_requeue_deferred_qc() returns SCSI_EH_DONE, with
this return value propagated back to the ata_scsi_eh_timed_out() operation
to indicate to scsi_timeout() that the timed out command was handled and
no further processing is needed.
For non-timed out deferred qc that need to be retried,
ata_scsi_requeue_deferred_qc() returns SCSI_EH_NOT_HANDLED, thus
indicating to scsi_timeout() that the timed out command needs to go
through the SCSI EH (and libata EH) processing by adding it to the EH work
queue with scsi_eh_scmd_add().
One side effect of these changes is that the function atapi_qc_complete()
needs to be modified to ensure that a deferred ATAPI command that needs
to be retried is completed with DID_REQUEUE instead of the default
SAM_STAT_GOOD status, and a command that timed out is completed with
DID_TIME_OUT instead of SAM_STAT_CHECK_CONDITION.
Fixes: 0ea84089dbf6 ("ata: libata-scsi: avoid Non-NCQ command starvation")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Tested-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Fix the handling of folio_queue allocation failure in writeback by adding a
mempool and passing in gfp_t flags to the rolling buffer functions that
allocate memory, using the mempool if gfp != GFP_KERNEL.
This is then extended upwards and the gfp to be used for a request is stored
in the netfs_io_request struct and is then used for both requests and
subrequests, eliminating the sleeping loops there.
The failure caused:
folio != NULL
WARNING: fs/netfs/write_issue.c:603 at netfs_writepages+0x883/0xa10 fs/netfs/write_issue.c:603, CPU#3: syz.0.17/5919
Fixes: cd0277ed0c18 ("netfs: Use new folio_queue data type and iterator instead of xarray iter")
Reported-by: syzbot+0da43efa72f88bd3a8af@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0da43efa72f88bd3a8af
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/20260727130716.1099906-5-dhowells@redhat.com
Tested-by: syzbot+0da43efa72f88bd3a8af@syzkaller.appspotmail.com
cc: Paulo Alcantara <pc@manguebit.org>
cc: Yun Zhou <yun.zhou@windriver.com>
cc: Matthew Wilcox <willy@infradead.org>
cc: Christoph Hellwig <hch@infradead.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
Correct a previous change (see Fixes) which reduced the standby timeout
from 30 to 5 seconds. Increase it to 15 seconds.
I was troubleshooting an error spotted during system suspend:
[ 1217.152867] ata1.00: Entering standby power mode
[ 1222.322948] ata1.00: qc timeout after 5000 msecs (cmd 0xe0)
[ 1222.324010] ata1.00: STANDBY IMMEDIATE failed (err_mask=0x4)
This drive is a Samsung 870 EVO SSD in good SMART standing, and I wasn't
aware of any reason it should be taking so long to standby. The issue is
intermittent, but I observed it sometimes taking 7 seconds to manually
standby. I assume this was interruption of background maintenance after
a power outage.
As a desktop user, I would prefer to wait the extra 2 seconds at suspend
to let the drive finish its business rather than drop the rails from
under it.
The change from 30 to 5 seconds was implicit when switching suspend
from START STOP UNIT to an internal command with no timeout table entry.
No reason was stated for the change.
Fixes: aa3998dbeb3a ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Cc: stable@vger.kernel.org
Signed-off-by: Matt Vollrath <tactii@gmail.com>
Assisted-by: Claude:claude-5-fable
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
Modify comments to prevent kernel-doc warnings:
- use "/*" for a non-kernel-doc comment
- add a Returns: section for ata_id_major_version()
Warning: include/linux/ata.h:770 Cannot find identifier on line:
*
Warning: include/linux/ata.h:782 function parameter 'id' not described in 'ata_id_sct_data_tables'
Warning: include/linux/ata.h:782 expecting prototype for Word(). Prototype was for ata_id_sct_data_tables() instead
Warning: include/linux/ata.h:820 No description found for return value of 'ata_id_major_version'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
|
|
When a driver's .get_fec_stats() handler is called and the driver
supports FEC histogram stats, the driver supplies the histogram bin
ranges via a pointer. This pointer is assigned while under the netdev
ops lock in fec_prepare_data(), but the actual data is only read after
the lock is released; so this allows the driver to change the ranges
(e.g. from another .get_fec_stats() call) while the current call chain
is reading them in fec_fill_reply().
Fix this by adding an ethtool core-owned buffer, ranges_buf, to struct
ethtool_fec_hist. Drivers whose ranges are built dynamically (currently
just mlx5) fill ranges_buf and then point the existing ranges pointer at
it, giving ethtool a consistent copy that stays valid after the netdev
ops lock is dropped and later in fec_fill_reply(). Drivers whose ranges
are compile-time constants (bnxt, netdevsim) are unaffected by the
potential race and keep setting the existing ranges pointer to their
constant array, without making copies.
Fixes: cc2f08129925 ("ethtool: add FEC bins histogram report")
Signed-off-by: Eric Joyner <eric.joyner@amd.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260723041342.39238-1-eric.joyner@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes. All are cc:stable. 11 are for MM. All are singletons -
please see the changelogs for details"
* tag 'mm-hotfixes-stable-2026-07-27-14-18' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
fs/proc/task_mmu: fix PAGEMAP_SCAN written state for PMD holes
mm/hugetlb: fix list corruption in allocate_file_region_entries()
mm: mglru: fix stale batch updates after memcg reparenting
selftest: fix headers in fclog.c
ocfs2: fix boundary check in ocfs2_check_dir_entry() to use buffer offset
mm/percpu-km: fix bitmap overflow and accounting in pcpu_create_chunk()
mm/util: don't read __page_2 for order-1 folios in snapshot_page()
mm/hugetlb: fix swap entry corruption when clearing uffd-wp at fork()
mm: migrate_device: fix pte_pfn/pte_dirty called on non-present PTE
fs/proc/task_mmu: fix PAGEMAP_SCAN written state for unpopulated ptes
userfaultfd: wait on source PMD during UFFDIO_MOVE
lib: test_hmm: use device devt for coherent device range selection
mm/vmstat: fold stranded per-cpu node stats when a node comes online
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- vfs: Preserve the ACL_DONT_CACHE state in forget_cached_acl().
ACL_DONT_CACHE is meant to be a permanent opt-out from ACL caching
which FUSE relies on for servers that don't negotiate FUSE_POSIX_ACL.
The helper replaced it with ACL_NOT_CACHED, silently re-enabling the
cache, and as fuse doesn't invalidate the cache for such servers a
properly timed get_acl() returned stale ACLs. Comes with a fuse
selftest reproducing this.
- pidfs:
- Preserve PIDFD_THREAD when a thread pidfd is reopened via
open_by_handle_at(). PIDFD_THREAD shares the O_EXCL bit which
do_dentry_open() strips after the flags have been validated, so
the reopened pidfd silently became a process pidfd. Comes with a
selftest.
- Add a pidfs_dentry_open() helper so the regular pidfd allocation
path and the file handle path share the code that forces O_RDWR
and reapplies the pidfd flags that do_dentry_open() strips.
- Handle FS_IOC32_GETVERSION in the compat ioctl path.
- Make pidfs_ino_lock static.
- iomap:
- Fix the block range calculation in ifs_clear_range_dirty() so a
partial clear doesn't drop the dirty state of blocks the range
only partially covers.
- Support invalidating partial folios so a partial truncate or hole
punch with blocksize < foliosize doesn't leave stale dirty bits
behind.
- Only set did_zero when iomap_zero_iter() actually zeroed
something.
- Guard ifs_set_range_dirty() and ifs_set_range_uptodate() against
zero-length ranges where the unsigned last-block calculation
underflows and bitmap_set() writes far beyond the ifs->state
allocation.
- Don't merge ioends with different io_private values as the merge
could leak or corrupt the private data of the individual ioends.
- exec:
- Raise bprm->have_execfd only once the binfmt_misc interpreter has
actually been opened. The flag was set as soon as a matching 'O'
or 'C' entry was found. If the interpreter open failed with
ENOEXEC the exec fell through to the next binary format with
have_execfd raised but no executable staged and begin_new_exec()
NULL derefed past the point of no return.
- Fix an unsigned loop counter wrap in transfer_args_to_stack() on
nommu. An overlong argument or environment string pushes bprm->p
below PAGE_SIZE, the stop index becomes zero, and the loop never
terminates, wrapping its counter and copying garbage from in
front of the page array into the new process stack.
- Make binfmt_elf_fdpic only honour the first PT_INTERP like
binfmt_elf does. Each additional PT_INTERP overwrote the previous
interpreter, leaking the name allocation and the interpreter file
reference together with the write denial open_exec() took,
leaving the file unwritable for as long as the system runs.
- overlayfs:
- Compare the full escaped xattr prefix including the trailing dot.
An xattr like "trusted.overlay.overlayfoo" was misclassified as
an escaped overlay xattr.
- Check read access to the copy_file_range() source with the
source's mounter credentials.
- super: Thawing a filesystem whose block device was frozen with
bdev_freeze() deadlocked. Dropping the last block layer freeze
reference from under s_umount ends up in fs_bdev_thaw() which
reacquires s_umount on the same task. Pin the superblock with an
active reference instead and call bdev_thaw() without holding
s_umount.
- procfs: Return EACCES instead of success when the ptrace access check
for namespace links fails.
- afs: Use afs_dir_get_block() rather than afs_dir_find_block() for
block 0 in afs_edit_dir_remove(), matching afs_edit_dir_add().
- Push the memcg gating of ->nr_cached_objects() down into the btrfs
and shmem callbacks instead of skipping every callback during
non-root memcg reclaim. The blanket check short-circuited XFS whose
inode reclaim hook is intentionally driven from per-memcg contexts to
free memcg-charged slab.
- eventpoll: Pin files while checking reverse paths.
Since struct file became SLAB_TYPESAFE_BY_RCU a concurrent close
could free and recycle the file under the check which then took and
dropped the f_lock of whatever live file now occupies that slot.
* tag 'vfs-7.2-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (24 commits)
super: fix emergency thaw deadlock on frozen block devices
pidfs: make pidfs_ino_lock static
eventpoll: pin files while checking reverse paths
fs: push nr_cached_objects memcg gating into individual filesystems
afs: Fix afs_edit_dir_remove() to get, not find, block 0
iomap: prevent ioend merge when io_private differs
iomap: add comments for ifs_clear/set_range_dirty()
iomap: fix out-of-bounds bitmap_set() with zero-length range
iomap: fix incorrect did_zero setting in iomap_zero_iter()
iomap: support invalidating partial folios
iomap: correct the range of a partial dirty clear
fs/super: fix emergency thaw double-unlock of s_umount
pidfs: handle FS_IOC32_GETVERSION in compat ioctl
ovl: check access to copy_file_range source with src mounter creds
proc: Fix broken error paths for namespace links
pidfs: add pidfs_dentry_open() helper
selftests/pidfd: check PIDFD_THREAD survives open_by_handle_at()
pidfs: preserve thread pidfds reopened by file handle
ovl: fix trusted xattr escape prefix matching
selftests/fuse: add ACL_DONT_CACHE regression test
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a number of small char/misc/etc driver fixes for 7.2-rc5 that
resolve a bunch of different reported issues. Included in here are:
- rust_binder error message reporting fix
- stratix10-svc firmware driver fixes
- mei driver fix
- intel_th hardware tracing driver fix
- comedi driver fix
- uio_hv_generic driver fix
- ntsync selftest fix
- nsm misc driver fix
- some MAINTAINER file updates
All of these have been in linux-next for over a week with no reported
issues"
* tag 'char-misc-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
MAINTAINERS: Update wine-devel list address
rust_binder: only print failure if error has source
intel_th: fix MSC output device reference leak
misc: nsm: pin the module while the device is open
mei: bus: access mei_device under device_lock on cleanup
misc: nsm: only unlock nsm_dev on post-lock error paths
selftests: ntsync: correct CONFIG_NTSYNC name
comedi: comedi_parport: deal with premature interrupt
uio_hv_generic: Bind to FCopy device by default
MAINTAINERS: Add Greg Kroah-Hartman to GPIB
firmware: stratix10-svc: fix teardown order in remove to prevent race
firmware: stratix10-svc: handle NO_RESPONSE in async poll
firmware: stratix10-svc: fix FCS SMC call kernel-doc
firmware: stratix10-svc: fix memory leaks and list corruption bugs
|
|
iopf_group_alloc() links each last-page IOPF group into the generic IOPF
pending list before invoking the domain fault handler.
iommufd_fault_iopf_handler() also queued an accepted group in the
IOMMUFD deliver list without removing it from the generic pending list.
When detach or HWPT replacement drops the device's IOPF reference count
to zero, an IOMMU driver may call iopf_queue_remove_device(). That
function responds to and frees groups through the generic pending list
without removing the same groups from IOMMUFD's deliver list or response
xarray. A later read, response, or cleanup can then access the freed
group and cause a UAF.
Fix this by dequeuing an accepted group from the generic pending list
before IOMMUFD queues it for userspace response.
Make iopf_group_response() send a response regardless of pending-list
membership, so the dequeued group can still be completed by IOMMUFD.
Link: https://patch.msgid.link/r/3CFD314D0FE4D7EC+20260720085017.3998878-2-peiyang_he@smail.nju.edu.cn
Closes: https://lore.kernel.org/all/B4F28798E2E784CA+d29f723c-b2b5-4b67-8d1c-4f7b9b0b27cb@smail.nju.edu.cn/
Fixes: 34765cbc679c ("iommufd: Associate fault object with iommufd_hw_pgtable")
Cc: stable@vger.kernel.org
Tested-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Assisted-by: Codex:gpt-5.6-sol
Signed-off-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following batch contains Netfilter/IPVS fixes for net. This batch
includes a mix of IPVS follow ups related to Sashiko reports, as well as
crash fixes for connection tracking expectation, helpers, ipset and
nf_tables mostly for old bugs. This also includes a fix for the
flowtable tunnel selftest.
1) Use s32 instead of s16 to calculate the remaining payload containing
SIP messages, otherwise underflow is possible allowing out-of-bound
memory access beyond the skb->data area. From Xiang Mei.
2) Fix the counter check in the flowtable selftest for tunnels, from
Lorenzo Bianconi.
3) Add and use nf_ct_expect_related_pair() to add the RTP and RTCP
expectations under the expectation lock, this is required by the SIP
and H.323 NAT helpers. This fixes a possible reinsertion of an
expectation with the DEAD flag set on while looping to find
consecutive ports.
4) Fix ipset UaF during table resize by blocking comment updates on
kernel-side adds. From David Lee.
5) Do not propagate the IP_VS_CONN_F_ONE_PACKET flag when using IPVS
state synchronization, otherwise reaching stale freed from
ip_vs_conn struct is possible, Zhiling Zou.
6) Adjust the hn1 hash node when the forwarding method changes between
MASQ and non-MASQ for an already hashed connection. This can leave
stale hash nodes pointing to a freed struct ip_vs_conn and trigger
UaF while reading /proc/net/ip_vs_conn. From Julian Anastasov.
7) nft_object rhltable needs to be per table, just like chain rhltable,
otherwise UaF from object lookup path while netns is being released.
There is also the nlevent path that can reach stale objects. Placing
this rhltable under the table hierarchy fixes this issue.
8) Reject invalid combined usage of hashlimit tables with and without
XT_HASHLIMIT_RATE_MATCH flag mode, otherwise access to uninitialized
.burst field of dsthash_ent is possible.
9) Fix checksum validations in IPVS performed from LOCAL_IN,
from Julian Anastasov.
10) Fix incorrect packet offset to layer 4 protocol in IPVS, uncovered
by Sashiko, from Julian Anastasov.
11) Skip the mangling of ICMP replies for non-first fragments, also
reported by Sashiko. Also from Julian.
12) Clear ip_vs_conn flags under the spinlock to fix a possible data
race. From Julian Anastasov.
13) Fix incorrect calculation of the payload bitmask in the nf_tables
hardware offload support, leading to UBSAN splat. From Xiang Mei.
* tag 'nf-26-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_payload: fix mask build for partial field offload
ipvs: clear the nfct flag under lock
ipvs: do not mangle ICMP replies for non-first fragments
ipvs: fix places with wrong packet offsets
ipvs: fix the checksum validations
netfilter: xt_hashlimit: validate hashtable supports XT_HASHLIMIT_RATE_MATCH
netfilter: nf_tables: make nft_object rhltable per table
ipvs: adjust double hashing when fwd method changes
ipvs: do not propagate one-packet flag to synced conns
netfilter: ipset: do not update comments from kernel-side hash adds
netfilter: nf_conntrack_expect: add and use nf_ct_expect_related_pair()
selftests: netfilter: nft_flowtable.sh: fix offload counter verification for tunnel tests
netfilter: nf_conntrack_sip: widen NAT rewrite delta to s32 in sip_help_tcp()
====================
Link: https://patch.msgid.link/20260723163910.274695-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull fscrypt fixes from Eric Biggers:
"A couple fixes for AI-detected bugs"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: Avoid dynamic allocation in fscrypt_get_devices()
fscrypt: Add missing superblock check in find_or_insert_direct_key()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab fixes from Vlastimil Babka:
- Prevent unbounded recursion in free path with memory allocation
profiling, which has caused a stack overflow on a Meta production
host due to a 125-deep __free_slab<->kfree recursion (Harry Yoo)
- Fix type-based partitioning confusing sparse which does not know
__builtin_infer_alloc_token() (Marco Elver)
- Fix a potential memory leak in bulk freeing path on NUMA machines
(Shengming Hu)
* tag 'slab-for-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
slab: silence sparse warning with type-based partitioning
mm/slab: prevent unbounded recursion in free path with new kmalloc type
lib/alloc_tag: introduce mem_alloc_profiling_permanently_disabled()
mm/slab: decouple SLAB_NO_SHEAVES from SLAB_NO_OBJ_EXT
mm/slab: fix a memory leak due to bootstrapping sheaves twice
mm/slub: fix lost local objects when bulk remote free batch fills
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Lots of fixes, double the count even for the 'new normal'. Largely due
to my time off followed by a networking conference which distracted
most maintainers (less so the AI generators).
Including fixes from Bluetooth and WiFi.
Current release - regressions:
- wifi: mt76: fix MAC address for non OF pcie cards
Current release - new code bugs:
- mptcp: fix BUILD_BUG_ON on legacy ARM config
- wifi: cfg80211: guard optional PMSR nominal time
Previous releases - regressions:
- qrtr: ns: raise node count limit to 512, we arbitrarily picked
256 as a limit, turns out it was too low for real world deployments
- vhost-net: fix TX stall when vhost owns virtio-net header
- eth: amd-xgbe: fix MAC_AUTO_SW handling in CL37 AN
- wifi: ath12k: fix low MLO RX throughput on WCN7850
Previous releases - always broken:
- number of random AI fixes for SCTP, RDS and TIPC protocols
- more AI-looking fixes for WiFi drivers
- number of fixes for missing pointer reloading after skb pull
- reject BPF redirect use from qdisc qevent block
- tcp: initialize standalone TCP-AO response padding
- vsock/virtio: collapse receive queue under memory pressure to avoid
client OOMing the host with tiny messages
- ipv4: icmp: fill flow parameters in icmp_route_lookup decoy lookup,
make sure the ICMP response routing follows the routing policy
- gro: fix double aggregation of flush-marked skbs
- ovpn: fix various refcount bugs
- tls: device: push pending open record on splice EOF
- eth: mlx5:
- use sender devcom for MPV master-up
- fix MCIA register buffer overflow on 32 dword reads"
* tag 'net-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (234 commits)
drop_monitor: perform u64_stats updates under IRQ-disabled section
drop_monitor: fix size calculations for 64-bit attributes
net: drop_monitor: fix info leak in NET_DM_ATTR_PAYLOAD
mptcp: fix BUILD_BUG_ON on legacy ARM config
selftests: mptcp: userspace_pm: fix undefined variable port
mptcp: fix stale skb->sk reference on subflow close
mptcp: pm: userspace: fix use-after-free in get_local_id
mptcp: decrement subflows counter on failed passive join
mac802154: hold an interface reference across the scan worker
sctp: don't free the ASCONF's own transport in DEL-IP processing
phonet: check register_netdevice_notifier() error in phonet_device_init()
phonet: pep: fix use-after-free in pep_get_sb()
bnge/bng_re: fix ring ID widths
tipc: fix integer overflow in tipc_recvmsg() and tipc_recvstream()
net: airoha: fix ETS channel derivation in airoha_tc_setup_qdisc_ets()
mctp: check register_netdevice_notifier() error in mctp_device_init()
ptp: netc: explicitly clear TMR_OFF during initialization
rds: tcp: unregister sysctl before tearing down listen socket
ipv6: Change allocation flags to match rcu_read_lock section requirements
net: slip: serialize receive against buffer reallocation
...
|
|
Firmware requires more than 16 bits to address TX ring IDs for its
internal QP management. Widen the associated HSI ring ID fields to
32 bits. The values firmware assigns remain within 24 bits, bounded
by the hardware doorbell XID field.
The fw_ring_id field belongs to bnge_ring_struct, a common struct
shared by all ring types, so widening it to u32 applies uniformly
across TX, RX, CP, and NQ rings but firmware assigns values within
16-bit range for all ring types except TX, which requires the wider
field.
Note that, Thor Ultra hardware has not yet been deployed and no
firmware has been released to field, so backward compatibility
is not a concern.
Fixes: 42d1c54d6248 ("bnge/bng_re: Add a new HSI")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Reviewed-by: Dharmender Garg <dharmender.garg@broadcom.com>
Reviewed-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com>
Link: https://patch.msgid.link/20260721063731.2622500-1-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The MCIA register can return up to 32 dwords (128 bytes) when the device
advertises the mcia_32dwords capability, but struct
mlx5_ifc_mcia_reg_bits only defines dword_0..11, leaving room for just
12 dwords (48 bytes) of data.
mlx5_query_mcia() clamps the read size to mlx5_mcia_max_bytes() and then
memcpy()s that many bytes out of the register, potentially reading past
the end of the 'out' buffer. On kernels built with FORTIFY_SOURCE this
is caught as a buffer overflow while reading the module EEPROM via
ethtool:
detected buffer overflow in memcpy
kernel BUG at lib/string_helpers.c:1048!
RIP: 0010:fortify_panic+0x13/0x20
Call Trace:
mlx5_query_mcia.isra.0+0x200/0x210 [mlx5_core]
mlx5_query_module_eeprom_by_page+0x4a/0xa0 [mlx5_core]
mlx5e_get_module_eeprom_by_page+0xbb/0x120 [mlx5_core]
eeprom_prepare_data+0xf3/0x170
ethnl_default_doit+0xf1/0x3b0
Extend the mcia_reg layout to 32 dwords.
Fixes: 271907ee2f29 ("net/mlx5: Query the maximum MCIA register read size from firmware")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Alex Lazar <alazar@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260717072338.1240582-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 0baad6f9b997 ("fs/super: skip non-memcg-aware nr_cached_objects
in memcg slab shrink") added a check in fs/super.c that skipped every
->nr_cached_objects() hook whenever the shrinker was invoked for a
non-root memcg, on the assumption that none of them honour sc->memcg.
That assumption is wrong for XFS, whose inode-reclaim hook is
intentionally driven from per-memcg contexts to free memcg-charged
slab. Encoding a blanket "never memcg-aware" policy in fs/super.c
short-circuits that path.
Push the check down into the callbacks whose counters really are
irrelevant to per-memcg reclaim - btrfs_nr_cached_objects() and
shmem_unused_huge_count() - and drop the fs/super.c gate. Each
filesystem can now lift the restriction independently if its counter
later grows memcg awareness, without touching fs/super.c.
Introduce mem_cgroup_shrink_is_root() in <linux/memcontrol.h> so the
callbacks don't open-code "sc->memcg is NULL or root".
Fixes: 0baad6f9b997 ("fs/super: skip non-memcg-aware nr_cached_objects in memcg slab shrink")
Acked-by: Qi Zheng <qi.zheng@linux.dev>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Usama Arif <usama.arif@linux.dev>
Link: https://patch.msgid.link/20260715103516.2410175-1-usama.arif@linux.dev
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Christian Brauner (Amutable) <brauner@kernel.org>
|
|
sip_help_tcp() stores the size change of each NAT-rewritten SIP message
in s16 diff and accumulates it in s16 tdiff, but a single message can
grow by more than S16_MAX while the packet stays under the 65535
enlarge_skb() limit: nf_nat_sip() rewrites every matching URI, and a long
Contact list expands the message by tens of kilobytes. diff then wraps,
and "datalen = datalen + diff - msglen" yields a huge unsigned datalen,
so the next iteration's ct_sip_get_header() reads past the linearized skb
tail.
Widen diff, tdiff and the seq_adjust hook to s32. Both are bounded by the
65535 byte packet limit, and the seqadj core is already s32
(nf_ct_seqadj_set() takes s32), so no previously accepted input is
rejected.
BUG: KASAN: use-after-free in ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464)
Read of size 1 at addr ffff888010800000 by task ksoftirqd/1/25
ct_sip_get_header (net/netfilter/nf_conntrack_sip.c:464)
sip_help_tcp (net/netfilter/nf_conntrack_sip.c:1694)
nf_confirm (net/netfilter/nf_conntrack_proto.c:183)
nf_hook_slow (net/netfilter/core.c:619)
ip6_output (net/ipv6/ip6_output.c:246)
ip6_forward (net/ipv6/ip6_output.c:690)
ipv6_rcv (net/ipv6/ip6_input.c:351)
__netif_receive_skb_one_core (net/core/dev.c:6212)
process_backlog (net/core/dev.c:6676)
__napi_poll (net/core/dev.c:7735)
net_rx_action (net/core/dev.c:7955)
handle_softirqs (kernel/softirq.c:622)
run_ksoftirqd (kernel/softirq.c:1076)
...
Fixes: f5b321bd37fb ("netfilter: nf_conntrack_sip: add TCP support")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/netfilter-devel/20260712234201.3213635-1-xmei5@asu.edu
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Sparse does not know __builtin_infer_alloc_token() and complains:
sparse: sparse: undefined identifier '__builtin_infer_alloc_token'
Fix it by using a dummy variant of __kmalloc_token() if __CHECKER__ is
defined.
Fixes: feb662d9168b ("slab: support for compiler-assisted type-based slab cache partitioning")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202607110912.nZTqfCrH-lkp@intel.com/
Signed-off-by: Marco Elver <elver@google.com>
Link: https://patch.msgid.link/20260721092005.1986693-1-elver@google.com
Acked-by: Harry Yoo (Oracle) <harry@kernel.org>
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
|
|
The mglru page table walker batches per-generation size deltas in
walk->nr_pages while walking page tables without holding the lruvec lock.
The reset_batch_size() later folds those deltas into walk->lruvec under
the lruvec lock.
The page table walker can run concurrently with the memcg reparenting path
as follows:
CPU0 CPU1
==== ====
walk_mm
--> walk_page_range
--> update_batch_size
--> walk->nr_pages += delta
mem_cgroup_css_offline
--> memcg_reparent_objcgs
--> lock lruvec
lru_gen_reparent_memcg
--> reparent child folios to parent
unlock lruvec
lock lruvec
reset_batch_size
--> child lrugen->nr_pages += delta
This will trigger the following warning in lru_gen_exit_memcg():
VM_WARN_ON_ONCE(memchr_inv(lruvec->lrugen.nr_pages, 0,
sizeof(lruvec->lrugen.nr_pages)));
And the user-visible impact of underestimated nr_pages in MGLRU was
premature OOMs because MGLRU does not try to reclaim memory when nr_pages
reaches zero, but there are still more pages.
To fix it, make reset_batch_size() check CSS_DYING under RCU before
flushing the pending batch. A non-dying memcg keeps the original lruvec
stable against RCU-delayed offlining; a dying memcg redirects the deltas
to the first non-dying ancestor.
Link: https://lore.kernel.org/20260710154318.75388-1-qi.zheng@linux.dev
Fixes: f304652609ea ("mm: vmscan: prepare for reparenting MGLRU folios")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reported-by: Peiyang He <peiyang_he@smail.nju.edu.cn>
Closes: https://lore.kernel.org/all/5A9E929D82717101+12fcf643-efb8-4b9a-a53a-1e28cc894f0b@smail.nju.edu.cn
Reviewed-by: Harry Yoo (Oracle) <harry@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Barry Song <baohua@kernel.org>
Cc: David Hildenbrand <david@kernel.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Wei Xu <weixugc@google.com>
Cc: Yuanchu Xie <yuanchu@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"12 hotfixes. 8 are cc:stable and the remainder address post-7.1 issues
or aren't considered appropriate for backporting. 10 are for MM.
All are singletons - please see the relevant changelogs for details"
* tag 'mm-hotfixes-stable-2026-07-20-11-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/memory-failure: trace: change memory_failure_event to ras subsystem
mm: page_reporting: allow driver to set batch capacity
mm/kmemleak: fix checksum computation for per-cpu objects
mm/damon/core: disallow overlapping input ranges for damon_set_regions()
MAINTAINERS: add Usama as a THP reviewer
fat: avoid stack overflow warning
mm/damon/core: validate ranges in damon_set_regions()
m68k: avoid -Wunused-but-set-parameter in clear_user_page()
mm/huge_memory: set PG_has_hwpoisoned only after new folio head is established
mm/page_vma_mapped: fix device-private PMD handling
MAINTAINERS: s/SeongJae/SJ/
userfaultfd: prevent registration of special VMAs
|
|
When a blk_crypto_key starts being used or is evicted, fs/crypto/ calls
fscrypt_get_devices() to get the filesystem's list of block devices,
then iterates over them and calls blk_crypto_config_supported(),
blk_crypto_start_using_key(), or blk_crypto_evict_key() on each one.
Currently, the block device pointers are placed in a dynamically
allocated array. This dynamic allocation is problematic because:
- It can fail, especially at the fscrypt_destroy_inline_crypt_key() call
site when it's invoked for inode eviction under direct reclaim.
- fscrypt_destroy_inline_crypt_key() doesn't handle the failure. It
just zeroizes and frees the blk_crypto_key without calling
blk_crypto_evict_key(). That causes a use-after-free.
For now, let's fix this in the straightforward and easily-backportable
way by switching to an on-stack array. Currently the fscrypt
multi-device functionality is used only by f2fs, which has a hardcoded
limit of 8 block devices. An on-stack array works fine for that.
(Of course, this solution won't scale up to large number of block
devices. For that we'd need a different solution, like moving the block
device iteration into the filesystem. Or in the case of btrfs, which
will only support blk-crypto-fallback, we should make it just call
blk-crypto-fallback directly, so the block devices won't be needed.)
Fixes: 22e9947a4b2b ("fscrypt: stop holding extra request_queue references")
Cc: stable@vger.kernel.org
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260713023708.9245-1-ebiggers%40kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260719055602.78828-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
|
|
Pull bpf fixes from Kumar Kartikeya Dwivedi:
- Fix a UAF in socket clone early bailout paths (Matt Bobrowski)
- Reject unhashed UDP sockets on sockmap update to prevent refcount
leaks (Michal Luczaj)
- Account for receive queue data in FIONREAD on sockmap sockets without
a verdict program (Mattia Meleleo)
- Reject negative constant offsets for verifier buffer pointers (Sun
Jian)
- Fix for tracing of kfuncs with implicit arguments (Ihor Solodrai)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Cover tracing implicit kfunc args
bpf: Fix tracing of kfuncs with implicit args
selftests/bpf: Cover negative buffer pointer offsets
bpf: Reject negative const offsets for buffer pointers
selftests/bpf: Test FIONREAD on a sockmap socket without a verdict program
bpf, sockmap: Account for receive queue in FIONREAD without a verdict program
selftests/bpf: Fail unbound UDP on sockmap update
selftests/bpf: Adapt sockmap update error handling
bpf, sockmap: Reject unhashed UDP sockets on sockmap update
selftests/bpf: Ensure UDP sockets are bound
bpf: Fix UAF in sock clone early bailouts
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Wireless, IPsec, Netfilter and Bluetooth.
Current release - new code bugs:
- netfilter: flowtable: use correct direction to set up tunnel route
Previous releases - regressions:
- wifi:
- mac80211:
- free AP_VLAN bc_buf SKBs outside IRQ lock
- defer link RX stats percpu free to RCU
- fix double free on alloc failure
- cfg80211: convert pmsr_free_wk to wiphy_work to fix deadlock
- ipv4: free fib_alias with kfree_rcu() on insert error path
- sched: act_tunnel_key: Defer dst_release to RCU callback
- xfrm: fix sk_dst_cache double-free in xfrm_user_policy()
- bluetooth: fix locking in unpair_device/disconnect_sync
- can: add locking for raw flags bitfield
- openvswitch: reject oversized nested action attrs
- eth:
- bnxt_en: handle partially initialized auxiliary devices
- ppp: defer channel free to an RCU grace period to fix UAF
Previous releases - always broken:
- netfilter: xt_nat: reject unsupported target families
- wifi:
- brcmfmac: fix heap overflow on a short auth frame
- cfg80211: add missing FTM API validation
- xfrm:
- reject optional IPTFS templates in outbound policies
- policy: preallocate inexact bins before xfrm_hash_rebuild reinsert
- bluetooth: revalidate LOAD_CONN_PARAM queued update
- can: fix lockless bound/ifindex race and silent RX_SETUP failure
- eth: mlx5: free mlx5_st_idx_data on final dealloc"
* tag 'net-7.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
mpls: fix NULL deref in mpls_valid_fib_dump_req() on CONFIG_INET=n
llc: fix SAP refcount leak when creating incoming sockets
selftests: netconsole: only restore MAC when it changed on resume
bnxt_en: Handle partially initialized auxiliary devices
sctp: fix auth_hmacs array size in struct sctp_cookie
net/sched: act_tunnel_key: Defer dst_release to RCU callback
dpll: fix NULL pointer dereference in dpll_msg_add_pin_ref_sync()
tcp: fix TIME_WAIT socket reference leak on PSP policy failure
net/mlx5: free mlx5_st_idx_data on final dealloc
can: isotp: serialize TX state transitions under so->rx_lock
can: isotp: fix use-after-free race with concurrent NETDEV_UNREGISTER
can: isotp: use unconditional synchronize_rcu() in isotp_release()
can: bcm: track a single source interface for ANYDEV timeout/throttle ops
can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler()
can: bcm: fix stale rx/tx ops after device removal
can: bcm: add missing device refcount for CAN filter removal
can: bcm: validate frame length in bcm_rx_setup() for RTR replies
can: bcm: extend bcm_tx_lock usage for data and timer updates
can: bcm: add missing rcu list annotations and operations
can: bcm: fix CAN frame rx/tx statistics
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into char-misc-linus
Dinh writes:
firmware: stratix10-svc: fixes for v7.2
- Fix a memory leak by explicitly using kfree() to match the list-managed lifetime
- Fix FCS SMC call documentation
- Add proper handling of a no response from the SDM
- Fix teardown order of service driver
* tag 'svc_fixes_for_v7.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
firmware: stratix10-svc: fix teardown order in remove to prevent race
firmware: stratix10-svc: handle NO_RESPONSE in async poll
firmware: stratix10-svc: fix FCS SMC call kernel-doc
firmware: stratix10-svc: fix memory leaks and list corruption bugs
|
|
A kfunc marked with KF_IMPLICIT_ARGS flag takes implicit arguments
(such as bpf_prog_aux) that the verifier injects at load time.
resolve_btfids strips those from the kfunc's BTF-visible prototype and
keeps the real kernel ABI in a counterpart _impl prototype [1].
fentry/fexit/fmod_ret/fsession programs may attach to the BPF kernel
functions, including those with implicit args. However
bpf_check_attach_target() and bpf_check_attach_btf_id_multi() extract
the struct btf_func_model from the wrong BTF prototype of the
kfunc. The btf_func_model is later read to construct the trampoline,
which then causes the injected implicit argument to be clobbered and
the kfunc dereferencing garbage.
Add btf_attach_func_proto() to resolve the real ABI prototype of the
kfunc the way the call site does: by looking up the _impl prototype
for a KF_IMPLICIT_ARGS kfunc. Use it at both attach-target model
construction sites.
To enable this, make two supporting changes:
* pass bpf_verifier_log instead of bpf_verifier_env to
find_kfunc_impl_proto(), so it can be reused from the attach path
* add btf_kfunc_check_flag() to test a flag across all of a kfunc's
hook sets, because a program attaching to a kfunc is not in the
kfunc's call-set
KF_IMPLICIT_ARGS must be consistent across the sets, so
btf_kfunc_check_flag() returns -EINVAL on inconsistency.
btf_kfunc_check_flag() reads the kfunc's flags from the target's
kfunc_set_tab. For a module BTF that table is stable only after the
module is live, so take a module reference around the read, mirroring
how the kfunc call path gates the same lookup with btf_try_get_module().
The remaining call sites of btf_distill_func_proto() are safe as
is. The BPF_TRACE_ITER case distills a registered iterator's
prototype, and bpf_struct_ops_desc_init() distills the
function-pointer members of a struct_ops type. Neither is a kfunc, and
so can't have implicit arguments.
[1] https://lore.kernel.org/all/20260120222638.3976562-1-ihor.solodrai@linux.dev/
Fixes: 64e1360524b9 ("bpf: Verifier support for KF_IMPLICIT_ARGS")
Reported-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://github.com/sched-ext/scx/issues/3687#issuecomment-4906694106
Link: https://patch.msgid.link/20260713235223.1639022-2-ihor.solodrai@linux.dev
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
|
|
Following the sale of PEAK-System France by HMS-Networks, this update is
intended to change all my @hms-networks.com email addresses to my new
@peak-system.fr address.
Signed-off-by: Stéphane Grosjean <s.grosjean@peak-system.fr>
Link: https://patch.msgid.link/20260410124251.40506-1-stephane.grosjean@free.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 7.2, take #2
- Move locking for kvm_io_bus_get_dev() into the caller, ensuring
race-free checks that the returned object is of the correct type
- Fix initialisation of the page-table walk level when relaxing
permissions
- Correctly update the XN attribute when relaxing permissions
- Fix the sign extension of loads from emulated MMIO regions
- Assorted collection of fixes for pKVM's FFA proxy, together with a
couple of FFA driver adjustments
|
|
tcp_bpf_ioctl() answers SIOCINQ from psock->msg_tot_len, which only
counts bytes in ingress_msg. Without a stream/skb verdict program
nothing is diverted there: data stays in sk_receive_queue, so FIONREAD
returns 0 even though read() returns data.
Add tcp_inq() to the reported value when the psock has no verdict
program. The two queues are disjoint, so bytes redirected into
ingress_msg from other sockets stay correctly accounted through
msg_tot_len.
Remove unused sk_psock_msg_inq().
Fixes: 929e30f93125 ("bpf, sockmap: Fix FIONREAD for sockmap")
Signed-off-by: Mattia Meleleo <mattia.meleleo@coralogix.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20260708-fionread-no-verdict-v3-1-b4ee31b3af53@coralogix.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
|
|
Define INTEL_SIP_SMC_STATUS_NO_RESPONSE (0x3) and handle it in
stratix10_svc_async_poll() the same way as INTEL_SIP_SMC_STATUS_BUSY,
returning -EAGAIN so callers can retry instead of treating the poll as
a hard failure.
When the Secure Device Manager has not yet produced a response for an
asynchronous transaction, ATF is expected to return
INTEL_SIP_SMC_STATUS_NO_RESPONSE. Without this handling, the service
layer maps the status to -EINVAL and async clients cannot distinguish
"not ready yet" from a real error.
Fixes: bcb9f4f07061 ("firmware: stratix10-svc: Add support for async communication")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Ng Ho Yin <adrian.ho.yin.ng@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Commit 280ea9c3154b ("mm/slab: avoid allocating slabobj_ext array from
its own slab") avoided recursive allocation of obj_exts from kmalloc
caches of the same size, by bumping the obj_exts array's allocation
size whenever the array size equals the size of the object being
allocated.
However, as reported by Danielle Costantino and Shakeel Butt,
even slabs from kmalloc caches of different sizes can form a cycle
by allocating obj_exts arrays from each other [1]:
What happened: a KMALLOC_NORMAL slab's obj_exts array (used by
allocation profiling / memcg accounting) is itself kmalloc()'d from a
KMALLOC_NORMAL cache, so the "slab holds another slab's obj_exts array"
relation can form cycles. With sizeof(struct slabobj_ext) == 16 and
the host's geometry:
- kmalloc-512 has 64 objects/slab -> array is 64*16 == 1024 bytes,
served from kmalloc-1k;
- kmalloc-1k has 32 objects/slab -> array is 32*16 == 512 bytes,
served from kmalloc-512.
A kmalloc-512 slab and a kmalloc-1k slab therefore hold each other's
obj_exts array. Discarding one frees the other's array, which empties
and discards that slab, which frees the first's array, and so on:
__free_slab() -> free_slab_obj_exts() -> kfree() -> discard_slab() ->
__free_slab() recurses along the cycle until the stack is exhausted.
With memory allocation profiling, this allows unbounded recursion
in the free path and led to a stack overflow on a production host in
the Meta fleet [1]:
BUG: TASK stack guard page was hit
Oops: stack guard page
RIP: 0010:kfree+0x8/0x5d0
Call Trace:
__free_slab+0x66/0xc0
kfree+0x3f0/0x5d0
... ( ~125x __free_slab <-> kfree ) ...
<kernel driver freeing a resource>
do_syscall_64
It is proposed [1] to resolve this issue by always serving the obj_exts
array allocation from kmalloc caches (or large kmalloc) of sizes larger
than the object size. However, as pointed out by Vlastimil Babka [2],
this can waste an excessive amount of memory as slabs from large
kmalloc sizes (e.g. kmalloc-8k) generally need obj_exts arrays much
smaller than the object size.
Therefore, rather than bumping the size, let us take a different
approach; disallow formation of cycles between kmalloc types when
allocating obj_exts arrays. Currently, all obj_exts arrays are served
from normal kmalloc caches. Cycles cannot be created if obj_exts arrays
of normal kmalloc caches are served from a special kmalloc type that can
never have obj_exts arrays.
To achieve this, create a new kmalloc type called KMALLOC_NO_OBJ_EXT.
KMALLOC_NO_OBJ_EXT caches are created with SLAB_NO_OBJ_EXT flag when
either 1) memory allocation profiling is not permanently disabled,
or 2) kmalloc types with a priority higher than KMALLOC_CGROUP are
aliased with KMALLOC_NORMAL.
Sheaf bootstrapping for KMALLOC_NO_OBJ_EXT caches now must be deferred
because allocation of a barn can trigger obj_exts array allocation of
normal kmalloc caches when the KMALLOC_NO_OBJ_EXT cache for that size
is not ready yet. For simplicity, perform bootstrapping of sheaves for
all kmalloc caches later.
Introduce a new slab alloc flag, SLAB_ALLOC_NO_OBJ_EXT, to prevent
allocation of obj_exts arrays, and let kmalloc_slab() override the type
to KMALLOC_NO_OBJ_EXT when specified. Note that kmalloc_type() remains
unchanged because kmalloc_flags() bypasses the kmalloc fastpath.
Do not pass SLAB_ALLOC_NO_RECURSE to kmalloc_flags() in
alloc_slab_obj_exts() and instead use SLAB_ALLOC_NO_OBJ_EXT only when
the objects are allocated from normal kmalloc caches. While this
prevents unbounded recursive allocation of obj_exts, it allows
KMALLOC_NO_OBJ_EXT caches to have sheaves.
Since sheaf allocations specify SLAB_ALLOC_NO_RECURSE that prevents
allocation of both sheaves and obj_exts arrays, the recursion depth
is bounded.
obj_exts arrays for non-kmalloc-normal caches can now have a valid tag.
Do not call mark_obj_codetag_empty() when freeing an obj_exts array to
avoid false warnings. KMALLOC_NO_OBJ_EXT don't need this as they never
allocate those arrays.
Reported-by: Danielle Costantino <dcostantino@meta.com>
Reported-by: Shakeel Butt <shakeel.butt@linux.dev>
Closes: https://lore.kernel.org/linux-mm/20260625230029.703750-1-shakeel.butt@linux.dev [1]
Fixes: 4b8736964640 ("mm/slab: add allocation accounting into slab allocation and free paths")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-mm/c5c4208d-a6f0-413e-bad9-49be12f12d55@kernel.org [2]
Signed-off-by: Harry Yoo (Oracle) <harry@kernel.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Link: https://patch.msgid.link/20260713-kmalloc-no-objext-v3-4-47c7bd138de7@kernel.org
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
|
|
mem_alloc_profiling_enabled() tells whether memalloc profiling is
currently enabled. However, even when this function returns false,
it can be enabled later.
However, this is not enough. Some optimizations can be applied only when
memalloc profiling is permanently disabled. For example, to skip the
creation of KMALLOC_NO_OBJ_EXT caches at boot time, mem_profiling must
be set to "never", "0" w/ debugging on, or have been shutdown so that
it can no longer be enabled.
Introduce mem_alloc_profiling_permanently_disabled() for this purpose.
Signed-off-by: Harry Yoo (Oracle) <harry@kernel.org>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Link: https://patch.msgid.link/20260713-kmalloc-no-objext-v3-3-47c7bd138de7@kernel.org
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
|
|
Bootstrap caches are created with SLAB_NO_OBJ_EXT to disallow sheaves
and obj_exts.
To allow disabling obj_exts while allowing sheaves, decouple
SLAB_NO_SHEAVES from SLAB_NO_OBJ_EXT. Bootstrap caches now have both
SLAB_NO_SHEAVES and SLAB_NO_OBJ_EXT.
No functional change intended.
Reviewed-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Signed-off-by: Harry Yoo (Oracle) <harry@kernel.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Link: https://patch.msgid.link/20260713-kmalloc-no-objext-v3-2-47c7bd138de7@kernel.org
Signed-off-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Android/IIO fixes from Greg KH:
"Here is a set of bugfixes for 7.2-rc3 that resolve a bunch of reported
issues in just the binder and iio codebases. Included in here are:
- binder driver bugfixes for both the rust and c versions for
reported problems
- lots and lots of iio driver bugfixes for lots of reported issues
(including a hid sensor driver bugfix)
Full details are in the shortlog, all of these have been in linux-next
with no reported issues"
* tag 'char-misc-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (36 commits)
iio: event: Fix event FIFO reset race
iio: imu: inv_icm42600: fix timestamp clock period by using lower value
iio: light: al3010: fix incorrect scale for the highest gain range
iio: adc: nxp-sar-adc: Fix the delay calculation in nxp_sar_adc_wait_for()
iio: light: tsl2591: return actual error from probe IRQ failure
iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading
iio: imu: st_lsm6dsx: deselect shub page before reading whoami
rust_binder: clear freeze listener on node removal
rust_binder: reject context manager self-transaction
rust_binder: use a u64 stride when cleaning up the offsets array
binder: fix UAF in binder_free_transaction()
binder: fix UAF in binder_thread_release()
rust_binder: synchronize Rust Binder stats with freeze commands
binder: cache secctx size before release zeroes it
rust_binder: fix BINDER_GET_EXTENDED_ERROR
iio: adc: ad7779: add missing 'select IIO_TRIGGERED_BUFFER' to Kconfig
iio: adc: ad4130: add missing `select IIO_TRIGGERED_BUFFER` to Kconfig
iio: adc: ti-ads124s08: Return reset GPIO lookup errors
iio: temperature: Build mlx90635 with CONFIG_MLX90635
iio: light: al3320a: add missing REGMAP_I2C to Kconfig
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Free field in error path of synthetic event parse
In __create_synth_event() the field was allocated but was not freed
in the error path
- Fix ring_buffer_event_length() on 8 byte aligned architectures
On architectures with CONFIG_HAVE_64BIT_ALIGNED_ACCESS set to y, the
ring_buffer_event_length() may return the wrong size. This is because
archs with that config set will always use the "big event meta
header" as that is 8 bytes keeping the payload 8 bytes aligned, even
when a 4 byte header could hold the size of the event
But ring_buffer_event_length() doesn't take this into account and
only subtracts 4 bytes for the meta header in the length when it
should have subtracted 8 bytes
- Have osnoise wait for a full rcu synchronization on unregister
osnoise_unregister_instance() used to call synchronize_rcu() before
freeing its copy of the instance but was switched to kfree_rcu(). The
osniose tracer has code that traverses the instances that it uses,
and inst is just a pointer to that instance. By using kfree_rcu()
instead of synchronize_rcu(), the instance that the inst pointer is
pointing to can be freed while the osnoise code is still referencing
it
That is, a rmdir on an instance first unregisters the tracer. When
the unregister finishes, the rmdir expects that the tracer is
finished with the instance that it is using. By putting back the
synchronize_rcu() in osnoise_unregister_instance() the unregistering
of osnoise will now return when all the users of the instance have
finished
- Remove an unused setting of "ret" in tracing_set_tracer()
- Fix ring_buffer_read_page() copying events
The commit that changed ring_buffer_read_page() to show dropped
events from the buffer itself, split the "commit" variable between
the commit value (with flags) and "size" that holds the size of the
sub-buffer. A cut and paste error changed the test of the reading
from checking the size of the buffer to the size of the event causing
reads to only read one event at a time
- Make tracepoint_printk a static variable
When the tracing sysctl knobs were move from sysctl.c to trace.c, the
variable tracepoint_printk no longer needed to be global. Make it
static
- Fix some typos
- Fix NULL pointer dereference in func_set_flag()
The flags update of the function tracer first checks if the value of
the flag is the same and exits if they are, and then it checks if the
current tracer is the function tracer and exits if it isn't. The
problem is that these checks need to be in a reversed order, as if
the tracer isn't the function tracer, then the flag being checked may
not exist. Reverse the order of these checks
- Fix ufs core trace events to not dereference a pointer in TP_printk()
The TP_printk() part of the TRACE_EVENT() macro is called when the
user reads the "trace" file. This can be seconds, minutes, hours,
days, weeks, and even months after the data was recorded into the
ring buffer. Thus, saving a pointer to an object into the ring buffer
and then dereferencing it from TP_printk() can cause harm as the
object the pointer is pointing to may no longer exist
Fix all the trace events in ufs core to save the device name in the
ring buffer instead of dereferencing the device descriptor from
TP_printk()
- Prevent out-of-bound reads in glob matching of trace events
The filter logic of events allows simple glob logic to add wild cards
to filter on strings. But some events have fields that may not have a
terminating 'nul' character. This may cause the glob matching to go
beyond the string. Change the logic to always pass in the length of
the field that is being matched
- Add no-rcu-check version of trace_##event##_enabled()
The trace_##event##_enabled() usually wraps trace events to do extra
work that is only needed when the trace event is enabled. But this
can hide events that are placed in locations where RCU is not
watching, and can make lockdep not see these bugs when the event is
not enabled
The trace_##event##_enabled() was updated to always test to make sure
RCU is watching to catch locations that may call events without RCU
being active
This caused a false positive for the irq_disabled() and related
events. As that use trace_irq_disabled_enabled() to force RCU to be
watching when the event is enabled via the ct_irq_enter() function,
calls the event, and then calls ct_irq_exit() to put RCU back to its
original state
The trace_irq_disabled_enabled() should not trigger a warning when
RCU is not watching because the code within its block handles the
case properly. Make a __trace_##event##_enabled() version for this
event to use that doesn't check RCU is watching as it handles the
case when it isn't
- Fix use-after-free in user_event_mm_dup()
When the enabler is removed from the link list, it is freed
immediately. But it is protected via RCU and needs to be freed after
an RCU grace period. Use queue_rcu_work() so that the event_mutex can
also be taken as user_event_put() takes the mutex on the last
reference is released
- Free type string in error path of parse_synth_field()
There's an error path in parse_synth_field() where the allocated type
string is not freed
- Add selftest that tests deferred event teardown
- Fix leak in error path of trace_remote_alloc_buffer()
If page allocation fails, the desc->nr_cpus is not incremented for
the current CPU and the allocations done for it are not freed
- Fix allocation length in trace_remote_alloc_buffer()
The logic to calculate the struct_len was doing a double count and
setting the value too large. Calculate the size upfront to fix the
error and simplify the logic
- Fix sparse CPU masks in ring_buffer_desc()
If there are sparse CPUs (gaps in the numbering), the
ring_buffer_desc() will fail as it tests the CPU number against the
number of CPUs that are used
* tag 'trace-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Allow sparse CPU masks in ring_buffer_desc()
tracing/remotes: Fix struct_len in trace_remote_alloc_buffer()
tracing/remotes: Fix leak in trace_remote_alloc_buffer() error path
selftests/user_events: Wait for deferred event teardown after unregister
tracing/synthetic: Free type string on error path
tracing/user_events: Fix use-after-free in user_event_mm_dup()
tracing: Add a no-rcu-check version of trace_##event##_enabled()
tracing: Prevent out-of-bounds read in glob matching
ufs: core: tracing: Do not dereference pointers in TP_printk()
tracing: Fix NULL pointer dereference in func_set_flag()
samples: ftrace: Fix typos in benchmark comment
tracing: Make tracepoint_printk static as not exported
ring-buffer: Fix ring_buffer_read_page() copying only one event per page
tracing: Remove unused ret assignment in tracing_set_tracer()
tracing/osnoise: Call synchronize_rcu() when unregistering
ring-buffer: Fix event length with forced 8-byte alignment
tracing/synthetic: Free pending field on error path
|
|
Pull NFS client fixes from Anna Schumaker:
- SUNRPC:
- Release lower rpc_clnt if killed waiting for XPRT_LOCKED
- Pin upper rpc_clnt across the TLS connect_worker
- NFS:
- Include MAY_WRITE in open permission mask for O_TRUNC
- Charge unstable writes by request size, not folio size
* tag 'nfs-for-7.2-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFS: Charge unstable writes by request size, not folio size
NFSv4: include MAY_WRITE in open permission mask for O_TRUNC
SUNRPC: pin upper rpc_clnt across the TLS connect_worker
SUNRPC: release lower rpc_clnt if killed waiting for XPRT_LOCKED
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Too many robustness fixes to list. Mostly for
- slight out-of-bounds reads of SKBs,
- leaks on error conditions, and
- malformed netlink input rejection.
* tag 'wireless-2026-07-09' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (46 commits)
wifi: cfg80211: bound element ID read when checking non-inheritance
wifi: brcmfmac: cyw: fix heap overflow on a short auth frame
wifi: brcmfmac: initialize SDIO data work before cleanup
wifi: cfg80211: validate assoc response length before status and IE access
wifi: cfg80211: validate rx/tx MLME callback frame lengths before access
wifi: mac80211: ibss: wait for in-flight TX on disconnect
wifi: mac80211: recalculate rx_nss on IBSS peer capability update
wifi: cfg80211: use wiphy work for socket owner autodisconnect
wifi: mac80211: fix memory leak in ieee80211_register_hw()
wifi: mac80211: free AP_VLAN bc_buf SKBs outside IRQ lock
wifi: mac80211: validate deauth frame length before reason access
wifi: mac80211: avoid non-S1G AID fallback for S1G assoc
wifi: cfg80211: reject empty PMSR peer lists
wifi: cfg80211: reject unsupported PMSR FTM location requests
wifi: cfg80211: validate PMSR FTM preamble range
wifi: cfg80211: validate PMSR measurement type data
wifi: nl80211: constrain MBSSID TX link ID range
wifi: nl80211: validate nested MBSSID IE blobs
wifi: ieee80211: validate MLE common info length
wifi: cfg80211: derive S1G beacon TSF from S1G fields
...
====================
Link: https://patch.msgid.link/20260709115038.243870-3-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
At the moment, if a virtio balloon device has a page reporting vq but its
size is < PAGE_REPORTING_CAPACITY (32), the balloon driver fails probe.
But, there's no way for host to know this value, so it can easily create a
smaller vq and suddenly adding the reporting capability to the device
makes all of the driver fail. Not pretty.
Add a capacity field to page_reporting_dev_info so drivers can control the
maximum number of pages per report batch.
In virtio-balloon, set the capacity to the reporting virtqueue size,
letting page_reporting adapt to whatever the device provides.
Capacity need not be a power of two. Code previously called out division
by PAGE_REPORTING_CAPACITY as cheap since it was a power of 2, but no
performance difference was observed with non-power-of-2 values.
If capacity is 0 or exceeds PAGE_REPORTING_CAPACITY, it defaults to
PAGE_REPORTING_CAPACITY. The 0 check and the clamping is done in
page_reporting_register(), before the reporting work is scheduled, so we
never get division by 0.
Link: https://lore.kernel.org/444c24cf39f3f3620fc90ef4695bd6b0979f4c4b.1783232420.git.mst@redhat.com
Fixes: b0c504f15471 ("virtio-balloon: add support for providing free page reports to host")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Assisted-by: Claude:claude-opus-4-6
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Gregory Price <gourry@gourry.net>
Acked-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
My legal and preferred first names are SeongJae and SJ, respectively. I
was using the legal name for commits and tags, while using the preferred
name for conversations. It sometimes confuses people including myself.
Consistently use the preferred name.
Together remove copyright notes on files. Those are only confusing for
people who are not familiar with the law. Meanwhile, we can infer the
information in a better way from git logs and public information.
Link: https://lore.kernel.org/20260630013820.143366-1-sj@kernel.org
Signed-off-by: SJ Park <sj@kernel.org>
Acked-by: Lorenzo Stoakes <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter, Bluetooth and batman-adv.
Current release - regressions:
- bluetooth: fix using chan->conn as indication to no remote netdev
Current release - new code bugs:
- netfilter: cap to maximum number of expectation per master on
updates
Previous releases - regressions:
- bluetooth:
- fix UAF of hci_conn_params in add_device_complete
- fix null ptr deref in hci_abort_conn()
- igmp: remove multicast group from hash table on device destruction
- batman-adv: prevent TVLV OOB check overflow
- eth: mlx5/mlx5e:
- fix off-by-one in single-FDB error rollback
- skip peer flow cleanup when LAG seq is unavailable
- fix crashes in dynamic per-channel stats and HV VHCA agent
- eth: mana: Sync page pool RX frags for CPU
Previous releases - always broken:
- netfilter:
- mark malformed IPv6 extension headers for hotdrop
- terminate table name before find_table_lock()
- ipvs: use parsed transport offset in TCP state lookup
- sched: act_pedit: fix TOCTOU heap OOB write in tc offload
- ethtool: rss: fix hfunc and input_xfrm parsing on big endian
- ipv4/ipv6: fix UAF and memory leak in IGMP/MLD
- tls: consume empty data records in tls_sw_read_sock()
- eth:
- octeontx2-af: fix VF bringup affecting PF promiscuous state
- gue: validate REMCSUM private option length"
* tag 'net-7.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
macsec: don't read an unset MAC header in macsec_encrypt()
dibs: loopback: validate offset and size in move_data()
octeontx2-af: fix VF bringup affecting PF promiscuous state
ethtool: rss: Fix hfunc and input_xfrm parsing on big endian
net/mlx5: Fix L3 tunnel entropy refcount leak
net: macb: drop in-flight Tx SKBs on close
net: mana: Sync page pool RX frags for CPU
net: mana: Validate the packet length reported by the NIC
selftests/net: fix EVP_MD_CTX leak in tcp_mmap
ipvs: ensure inner headers in ICMP errors are in headroom
ipvs: use parsed transport offset in SCTP state lookup
ipvs: use parsed transport offset in TCP state lookup
ipvs: pass parsed transport offset to state handlers
netfilter: handle unreadable frags
netfilter: flowtable: support IPIP tunnel with direct xmit
netfilter: flowtable: IPIP tunnel hardware offload is not yet support
netfilter: flowtable: use dst in this direction when pushing IPIP header
netfilter: ipset: allocate the proper memory for the generic hash structure
netfilter: ipset: cleanup the add/del backlog when resize failed
netfilter: ipset: exclude gc when resize is in progress
...
|
|
The TLS connect path has a use-after-free: nothing pins the
upper rpc_clnt across the delayed connect_worker. xs_connect()
stores task->tk_client in sock_xprt::clnt as a raw pointer
and queues the worker; for TLS-secured transports that worker
is xs_tcp_tls_setup_socket(), which reads several fields out
of the saved pointer (cl_timeout, cl_program, cl_prog,
cl_vers, cl_cred, cl_stats) to construct the args for the
inner handshake rpc_clnt.
The xprt does not reference the rpc_clnt; the rpc_clnt
references the xprt. xs_destroy() does cancel the
connect_worker, but it runs only when the xprt's refcount
drops to zero, which cannot happen until the rpc_clnt
releases its cl_xprt reference in rpc_free_client_work().
When a TLS handshake fails fatally (for example, an mTLS
mount whose client cert does not match the server), the
connecting task is woken with -EACCES and exits, the mount
caller invokes rpc_shutdown_client(), and the upper rpc_clnt
is freed before the queued connect_worker fires.
xs_tcp_tls_setup_socket() then dereferences the freed clnt,
producing the refcount_t underflow Michael Nemanov reported.
Take a reference on the upper rpc_clnt in xs_connect() for
TLS transports via a new rpc_hold_client() helper, and drop
it in the connect_worker's exit path with rpc_release_client().
The xprt_lock_connect() / xprt_unlock_connect() pairing
already serialises xs_connect() with xs_tcp_tls_setup_socket(),
so the take and release are balanced one-for-one.
The non-TLS connect worker (xs_tcp_setup_socket) never reads
sock_xprt::clnt, so leave that path alone and avoid the
clnt-holds-xprt-holds-clnt cycle that would otherwise prevent
xprt destruction.
Reported-by: Michael Nemanov <michael.nemanov@vastdata.com>
Closes: https://lore.kernel.org/linux-nfs/40e3d522-dfcf-4fc1-9c55-b5e81f1536d5@vastdata.com/
Fixes: 75eb6af7acdf ("SUNRPC: Add a TCP-with-TLS RPC transport class")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Michael Nemanov <michael.nemanov@vastdata.com>
Reviewed-by: Michael Nemanov <michael.nemanov@vastdata.com>
Signed-off-by: Anna Schumaker <anna.schumaker@hammerspace.com>
|
|
A race condition exists between device teardown (inetdev_destroy) and
incoming IGMP query processing (igmp_rcv), leading to a Use-After-Free
in the IGMP timer callback.
During device destruction, inetdev_destroy() drops the primary reference
to in_device, which can drop its refcount to 0. The actual freeing of
in_device memory is deferred via RCU (using call_rcu()).
Concurrently, igmp_rcv() runs under RCU read lock and obtains the
in_device pointer. Because the memory is RCU-protected, CPU-0 can safely
dereference in_device even if its refcount has hit 0.
However, if CPU-0 calls igmp_gq_start_timer() and re-arms the timer, it
attempts to acquire a reference using in_dev_hold(). This increments the
refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning.
Since the in_device memory is still scheduled to be freed after the RCU
grace period (as the free callback does not check the refcount again),
the device is freed while the timer is still armed. When the timer
expires, it accesses the freed memory, causing a kernel panic.
Fix this by using refcount_inc_not_zero() (via a new helper
in_dev_hold_safe()) to prevent acquiring a reference if the device is
already being destroyed. If the refcount is 0, we do not arm the timer.
A similar issue in IPv6 MLD is fixed in a subsequent patch.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Zero Day Initiative <zdi-disclosures@trendmicro.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260705181756.963063-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Tracepoints require that RCU is watching. To prevent them from being used
in places that RCU is not watching, the trace_##event() macro always
calls rcu_is_watching() even when the event is not enabled and warns if
RCU is not watching. This is to make sure a warning is triggered even if
the tracepoint is never enabled (as it is only a bug when it is).
It was noticed that tracepoints could be hidden within
trace_#event#_enabled() calls, which are used to do extra work for the
tracepoint only if the tracepoint is enabled. But this also can hide the
fact that a tracepoint is placed in a location that can be called when RCU
is not watching.
Commit 9764e731ef6ab ("tracepoint: Add lockdep rcu_is_watching() check to
trace_##name##_enabled()") added a check to the trace_##event##_enabled()
macro to make sure RCU is watching when it is called to make sure not to
hide the bug of a tracepoint being called when RCU is not watching.
There is one case in the irq_disable tracepoint where it is within a
trace_irq_disable_enabled() block, but it checks if RCU is watching, and
if it isn't, it makes a call to ct_irq_enter() that makes RCU watch again.
But because trace_irq_disable_enabled() now checks if RCU is watching and
will trigger if it isn't. This is a false warning as the code within
the block handles this case.
Add a new internal macro __trace_##event##_enabled() that doesn't check if
RCU is watching, and convert the irq_enable/disable tracepoints over to
it.
Link: https://patch.msgid.link/20260701132744.6a7fc68b@robin
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdXud_RpWag_hFqa2ByBGRxg6KnxGL1ObCWZrpTsk3TfAw@mail.gmail.com/
Fixes: 9764e731ef6ab ("tracepoint: Add lockdep rcu_is_watching() check to trace_##name##_enabled()")
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
