| Age | Commit message (Collapse) | Author |
|---|
|
commit 5b484311507b5d403c1f7a45f6aa3778549e268b upstream.
Even though nobody should use this value (except when declaring the
"flags" bitmap), kernel-doc still gets upset that it's not documented.
It reports:
WARNING: ../include/linux/device.h:519
Enum value 'DEV_FLAG_COUNT' not described in enum 'struct_device_flags'
Add the description of DEV_FLAG_COUNT.
Fixes: a2225b6e834a ("driver core: Don't let a device probe until it's ready")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/f318cd43-81fd-48b9-abf7-92af85f12f91@infradead.org
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260413195910.1.I23aca74fe2d3636a47df196a80920fecb2643220@changeid
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3e4bb2706817710d9461394da8b75be79981586b ]
Patch series "mm: expand mmap_prepare functionality and usage", v4.
This series expands the mmap_prepare functionality, which is intended to
replace the deprecated f_op->mmap hook which has been the source of bugs
and security issues for some time.
This series starts with some cleanup of existing mmap_prepare logic, then
adds documentation for the mmap_prepare call to make it easier for
filesystem and driver writers to understand how it works.
It then importantly adds a vm_ops->mapped hook, a key feature that was
missing from mmap_prepare previously - this is invoked when a driver which
specifies mmap_prepare has successfully been mapped but not merged with
another VMA.
mmap_prepare is invoked prior to a merge being attempted, so you cannot
manipulate state such as reference counts as if it were a new mapping.
The vm_ops->mapped hook allows a driver to perform tasks required at this
stage, and provides symmetry against subsequent vm_ops->open,close calls.
The series uses this to correct the afs implementation which wrongly
manipulated reference count at mmap_prepare time.
It then adds an mmap_prepare equivalent of vm_iomap_memory() -
mmap_action_simple_ioremap(), then uses this to update a number of drivers.
It then splits out the mmap_prepare compatibility layer (which allows for
invocation of mmap_prepare hooks in an mmap() hook) in such a way as to
allow for more incremental implementation of mmap_prepare hooks.
It then uses this to extend mmap_prepare usage in drivers.
Finally it adds an mmap_prepare equivalent of vm_map_pages(), which lays
the foundation for future work which will extend mmap_prepare to DMA
coherent mappings.
This patch (of 21):
Rather than passing arbitrary fields, pass a vm_area_desc pointer to mmap
prepare functions to mmap prepare, and an action and vma pointer to mmap
complete in order to put all the action-specific logic in the function
actually doing the work.
Additionally, allow mmap prepare functions to return an error so we can
error out as soon as possible if there is something logically incorrect in
the input.
Update remap_pfn_range_prepare() to properly check the input range for the
CoW case.
Also remove io_remap_pfn_range_complete(), as we can simply set up the
fields correctly in io_remap_pfn_range_prepare() and use
remap_pfn_range_complete() for this.
While we're here, make remap_pfn_range_prepare_vma() a little neater, and
pass mmap_action directly to call_action_complete().
Then, update compat_vma_mmap() to perform its logic directly, as
__compat_vma_map() is not used by anything so we don't need to export it.
Also update compat_vma_mmap() to use vfs_mmap_prepare() rather than
calling the mmap_prepare op directly.
Finally, update the VMA userland tests to reflect the changes.
Link: https://lkml.kernel.org/r/cover.1774045440.git.ljs@kernel.org
Link: https://lkml.kernel.org/r/99f408e4694f44ab12bdc55fe0bd9685d3bd1117.1774045440.git.ljs@kernel.org
Signed-off-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Acked-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Bodo Stroesser <bostroesser@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: David Hildenbrand <david@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Long Li <longli@microsoft.com>
Cc: Marc Dionne <marc.dionne@auristor.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Richard Weinberger <richard@nod.at>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: f96e1d5f15b7 ("mm: avoid deadlock when holding rmap on mmap_prepare error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a2be37eedb52ea26938fa4cc9de1ff84963c57ad upstream.
All the functions operating on the 'handle' pointer are claiming it is a
pointer to const thus they should not modify the handle. In fact that's
a false statement, because first thing these functions do is drop the
cast to const with container_of:
struct acpm_info *acpm = handle_to_acpm_info(handle);
And with such cast the handle is easily writable with simple:
acpm->handle.ops.pmic_ops.read_reg = NULL;
The code is not correct logically, either, because functions like
acpm_get_by_node() and acpm_handle_put() are meant to modify the handle
reference counting, thus they must modify the handle. Modification here
happens anyway, even if the reference counting is stored in the
container which the handle is part of.
The code does not have actual visible bug, but incorrect 'const'
annotations could lead to incorrect compiler decisions.
Fixes: a88927b534ba ("firmware: add Exynos ACPM protocol driver")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260224104203.42950-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 37beb42560165869838e7d91724f3e629db64129 upstream.
kstack_offset was previously maintained per-cpu, but this caused a
couple of issues. So let's instead make it per-task.
Issue 1: add_random_kstack_offset() and choose_random_kstack_offset()
expected and required to be called with interrupts and preemption
disabled so that it could manipulate per-cpu state. But arm64, loongarch
and risc-v are calling them with interrupts and preemption enabled. I
don't _think_ this causes any functional issues, but it's certainly
unexpected and could lead to manipulating the wrong cpu's state, which
could cause a minor performance degradation due to bouncing the cache
lines. By maintaining the state per-task those functions can safely be
called in preemptible context.
Issue 2: add_random_kstack_offset() is called before executing the
syscall and expands the stack using a previously chosen random offset.
choose_random_kstack_offset() is called after executing the syscall and
chooses and stores a new random offset for the next syscall. With
per-cpu storage for this offset, an attacker could force cpu migration
during the execution of the syscall and prevent the offset from being
updated for the original cpu such that it is predictable for the next
syscall on that cpu. By maintaining the state per-task, this problem
goes away because the per-task random offset is updated after the
syscall regardless of which cpu it is executing on.
Fixes: 39218ff4c625 ("stack: Optionally randomize kernel stack offset each syscall")
Closes: https://lore.kernel.org/all/dd8c37bc-795f-4c7a-9086-69e584d8ab24@arm.com/
Cc: stable@vger.kernel.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://patch.msgid.link/20260303150840.3789438-2-ryan.roberts@arm.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6af36aeb147a06dea47c49859cd6ca5659aeb987 upstream.
Stacked filesystems such as overlayfs do not currently provide the
necessary mechanisms for LSMs to properly enforce access controls on the
mmap() and mprotect() operations. In order to resolve this gap, a LSM
security blob is being added to the backing_file struct and the following
new LSM hooks are being created:
security_backing_file_alloc()
security_backing_file_free()
security_mmap_backing_file()
The first two hooks are to manage the lifecycle of the LSM security blob
in the backing_file struct, while the third provides a new mmap() access
control point for the underlying backing file. It is also expected that
LSMs will likely want to update their security_file_mprotect() callback
to address issues with their mprotect() controls, but that does not
require a change to the security_file_mprotect() LSM hook.
There are a three other small changes to support these new LSM hooks:
* Pass the user file associated with a backing file down to
alloc_empty_backing_file() so it can be included in the
security_backing_file_alloc() hook.
* Add getter and setter functions for the backing_file struct LSM blob
as the backing_file struct remains private to fs/file_table.c.
* Constify the file struct field in the LSM common_audit_data struct to
better support LSMs that need to pass a const file struct pointer into
the common LSM audit code.
Thanks to Arnd Bergmann for identifying the missing EXPORT_SYMBOL_GPL()
and supplying a fixup.
Cc: stable@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-unionfs@vger.kernel.org
Cc: linux-erofs@lists.ozlabs.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9ded47ad003f09a94b6a710b5c47f4aa5ceb7429 upstream.
Hold state of deferred I/O in struct fb_deferred_io_state. Allocate an
instance as part of initializing deferred I/O and remove it only after
the final mapping has been closed. If the fb_info and the contained
deferred I/O meanwhile goes away, clear struct fb_deferred_io_state.info
to invalidate the mapping. Any access will then result in a SIGBUS
signal.
Fixes a long-standing problem, where a device hot-unplug happens while
user space still has an active mapping of the graphics memory. The hot-
unplug frees the instance of struct fb_info. Accessing the memory will
operate on undefined state.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 60b59beafba8 ("fbdev: mm: Deferred IO support")
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org # v2.6.22+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6f1d4d2ecfcd1b577dc87350ea965fe81f272e83 upstream.
Outside of the EFI tpm code, the TPM_MEMREMAP()/TPM_MEMUNMAP functions are
defined as trivial macros, leading to the mapping_size variable ending
up unused:
In file included from drivers/char/tpm/tpm-sysfs.c:16:
In file included from drivers/char/tpm/tpm.h:28:
include/linux/tpm_eventlog.h:167:6: error: variable 'mapping_size' set but not used [-Werror,-Wunused-but-set-variable]
167 | int mapping_size;
Turn the stubs into inline functions to avoid this warning.
Cc: stable@vger.kernel.org # v5.3+
Fixes: c46f3405692d ("tpm: Reserve the TPM final events table")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 33c3f6c2b48cd84b441dba1ee3e62290e53930f4 upstream.
When kdamond_fn() main loop is finished, the function cancels remaining
damos_walk() request and unset the damon_ctx->kdamond so that API callers
and API functions themselves can show the context is terminated.
damos_walk() adds the caller's request to the queue first. After that, it
shows if the kdamond of the damon_ctx is still running (damon_ctx->kdamond
is set). Only if the kdamond is running, damos_walk() starts waiting for
the kdamond's handling of the newly added request.
The damos_walk() requests registration and damon_ctx->kdamond unset are
protected by different mutexes, though. Hence, damos_walk() could race
with damon_ctx->kdamond unset, and result in deadlocks.
For example, let's suppose kdamond successfully finished the damow_walk()
request cancelling. Right after that, damos_walk() is called for the
context. It registers the new request, and shows the context is still
running, because damon_ctx->kdamond unset is not yet done. Hence the
damos_walk() caller starts waiting for the handling of the request.
However, the kdamond is already on the termination steps, so it never
handles the new request. As a result, the damos_walk() caller thread
infinitely waits.
Fix this by introducing another damon_ctx field, namely
walk_control_obsolete. It is protected by the
damon_ctx->walk_control_lock, which protects damos_walk() request
registration. Initialize (unset) it in kdamond_fn() before letting
damon_start() returns and set it just before the cancelling of the
remaining damos_walk() request is executed. damos_walk() reads the
obsolete field under the lock and avoids adding a new request.
After this change, only requests that are guaranteed to be handled or
cancelled are registered. Hence the after-registration DAMON context
termination check is no longer needed. Remove it together.
The issue is found by sashiko [1].
Link: https://lore.kernel.org/20260327233319.3528-3-sj@kernel.org
Link: https://lore.kernel.org/20260325141956.87144-1-sj@kernel.org [1]
Fixes: bf0eaba0ff9c ("mm/damon/core: implement damos_walk()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.14.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 55da81663b9642dd046b26dd6f1baddbcf337c1e upstream.
Patch series "mm/damon/core: fix damon_call()/damos_walk() vs kdmond exit
race".
damon_call() and damos_walk() can leak memory and/or deadlock when they
race with kdamond terminations. Fix those.
This patch (of 2);
When kdamond_fn() main loop is finished, the function cancels all
remaining damon_call() requests and unset the damon_ctx->kdamond so that
API callers and API functions themselves can know the context is
terminated. damon_call() adds the caller's request to the queue first.
After that, it shows if the kdamond of the damon_ctx is still running
(damon_ctx->kdamond is set). Only if the kdamond is running, damon_call()
starts waiting for the kdamond's handling of the newly added request.
The damon_call() requests registration and damon_ctx->kdamond unset are
protected by different mutexes, though. Hence, damon_call() could race
with damon_ctx->kdamond unset, and result in deadlocks.
For example, let's suppose kdamond successfully finished the damon_call()
requests cancelling. Right after that, damon_call() is called for the
context. It registers the new request, and shows the context is still
running, because damon_ctx->kdamond unset is not yet done. Hence the
damon_call() caller starts waiting for the handling of the request.
However, the kdamond is already on the termination steps, so it never
handles the new request. As a result, the damon_call() caller threads
infinitely waits.
Fix this by introducing another damon_ctx field, namely
call_controls_obsolete. It is protected by the
damon_ctx->call_controls_lock, which protects damon_call() requests
registration. Initialize (unset) it in kdamond_fn() before letting
damon_start() returns and set it just before the cancelling of remaining
damon_call() requests is executed. damon_call() reads the obsolete field
under the lock and avoids adding a new request.
After this change, only requests that are guaranteed to be handled or
cancelled are registered. Hence the after-registration DAMON context
termination check is no longer needed. Remove it together.
Note that the deadlock will not happen when damon_call() is called for
repeat mode request. In tis case, damon_call() returns instead of waiting
for the handling when the request registration succeeds and it shows the
kdamond is running. However, if the request also has dealloc_on_cancel,
the request memory would be leaked.
The issue is found by sashiko [1].
Link: https://lore.kernel.org/20260327233319.3528-1-sj@kernel.org
Link: https://lore.kernel.org/20260327233319.3528-2-sj@kernel.org
Link: https://lore.kernel.org/20260325141956.87144-1-sj@kernel.org [1]
Fixes: 42b7491af14c ("mm/damon/core: introduce damon_call()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.14.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6b1842775a460245e97d36d3a67d0cfba7c4ff79 upstream.
Due to initialization ordering, page_ext is allocated and initialized
relatively late during boot. Some pages have already been allocated and
freed before page_ext becomes available, leaving their codetag
uninitialized.
A clear example is in init_section_page_ext(): alloc_page_ext() calls
kmemleak_alloc(). If the slab cache has no free objects, it falls back to
the buddy allocator to allocate memory. However, at this point page_ext
is not yet fully initialized, so these newly allocated pages have no
codetag set. These pages may later be reclaimed by KASAN, which causes
the warning to trigger when they are freed because their codetag ref is
still empty.
Use a global array to track pages allocated before page_ext is fully
initialized. The array size is fixed at 8192 entries, and will emit a
warning if this limit is exceeded. When page_ext initialization
completes, set their codetag to empty to avoid warnings when they are
freed later.
This warning is only observed with CONFIG_MEM_ALLOC_PROFILING_DEBUG=Y and
mem_profiling_compressed disabled:
[ 9.582133] ------------[ cut here ]------------
[ 9.582137] alloc_tag was not set
[ 9.582139] WARNING: ./include/linux/alloc_tag.h:164 at __pgalloc_tag_sub+0x40f/0x550, CPU#5: systemd/1
[ 9.582190] CPU: 5 UID: 0 PID: 1 Comm: systemd Not tainted 7.0.0-rc4 #1 PREEMPT(lazy)
[ 9.582192] Hardware name: Red Hat KVM, BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 9.582194] RIP: 0010:__pgalloc_tag_sub+0x40f/0x550
[ 9.582196] Code: 00 00 4c 29 e5 48 8b 05 1f 88 56 05 48 8d 4c ad 00 48 8d 2c c8 e9 87 fd ff ff 0f 0b 0f 0b e9 f3 fe ff ff 48 8d 3d 61 2f ed 03 <67> 48 0f b9 3a e9 b3 fd ff ff 0f 0b eb e4 e8 5e cd 14 02 4c 89 c7
[ 9.582197] RSP: 0018:ffffc9000001f940 EFLAGS: 00010246
[ 9.582200] RAX: dffffc0000000000 RBX: 1ffff92000003f2b RCX: 1ffff110200d806c
[ 9.582201] RDX: ffff8881006c0360 RSI: 0000000000000004 RDI: ffffffff9bc7b460
[ 9.582202] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff3a62324
[ 9.582203] R10: ffffffff9d311923 R11: 0000000000000000 R12: ffffea0004001b00
[ 9.582204] R13: 0000000000002000 R14: ffffea0000000000 R15: ffff8881006c0360
[ 9.582206] FS: 00007ffbbcf2d940(0000) GS:ffff888450479000(0000) knlGS:0000000000000000
[ 9.582208] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 9.582210] CR2: 000055ee3aa260d0 CR3: 0000000148b67005 CR4: 0000000000770ef0
[ 9.582211] PKRU: 55555554
[ 9.582212] Call Trace:
[ 9.582213] <TASK>
[ 9.582214] ? __pfx___pgalloc_tag_sub+0x10/0x10
[ 9.582216] ? check_bytes_and_report+0x68/0x140
[ 9.582219] __free_frozen_pages+0x2e4/0x1150
[ 9.582221] ? __free_slab+0xc2/0x2b0
[ 9.582224] qlist_free_all+0x4c/0xf0
[ 9.582227] kasan_quarantine_reduce+0x15d/0x180
[ 9.582229] __kasan_slab_alloc+0x69/0x90
[ 9.582232] kmem_cache_alloc_noprof+0x14a/0x500
[ 9.582234] do_getname+0x96/0x310
[ 9.582237] do_readlinkat+0x91/0x2f0
[ 9.582239] ? __pfx_do_readlinkat+0x10/0x10
[ 9.582240] ? get_random_bytes_user+0x1df/0x2c0
[ 9.582244] __x64_sys_readlinkat+0x96/0x100
[ 9.582246] do_syscall_64+0xce/0x650
[ 9.582250] ? __x64_sys_getrandom+0x13a/0x1e0
[ 9.582252] ? __pfx___x64_sys_getrandom+0x10/0x10
[ 9.582254] ? do_syscall_64+0x114/0x650
[ 9.582255] ? ksys_read+0xfc/0x1d0
[ 9.582258] ? __pfx_ksys_read+0x10/0x10
[ 9.582260] ? do_syscall_64+0x114/0x650
[ 9.582262] ? do_syscall_64+0x114/0x650
[ 9.582264] ? __pfx_fput_close_sync+0x10/0x10
[ 9.582266] ? file_close_fd_locked+0x178/0x2a0
[ 9.582268] ? __x64_sys_faccessat2+0x96/0x100
[ 9.582269] ? __x64_sys_close+0x7d/0xd0
[ 9.582271] ? do_syscall_64+0x114/0x650
[ 9.582273] ? do_syscall_64+0x114/0x650
[ 9.582275] ? clear_bhb_loop+0x50/0xa0
[ 9.582277] ? clear_bhb_loop+0x50/0xa0
[ 9.582279] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 9.582280] RIP: 0033:0x7ffbbda345ee
[ 9.582282] Code: 0f 1f 40 00 48 8b 15 29 38 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff c3 0f 1f 40 00 f3 0f 1e fa 49 89 ca b8 0b 01 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d fa 37 0d 00 f7 d8 64 89 01 48
[ 9.582284] RSP: 002b:00007ffe2ad8de58 EFLAGS: 00000202 ORIG_RAX: 000000000000010b
[ 9.582286] RAX: ffffffffffffffda RBX: 000055ee3aa25570 RCX: 00007ffbbda345ee
[ 9.582287] RDX: 000055ee3aa25570 RSI: 00007ffe2ad8dee0 RDI: 00000000ffffff9c
[ 9.582288] RBP: 0000000000001000 R08: 0000000000000003 R09: 0000000000001001
[ 9.582289] R10: 0000000000001000 R11: 0000000000000202 R12: 0000000000000033
[ 9.582290] R13: 00007ffe2ad8dee0 R14: 00000000ffffff9c R15: 00007ffe2ad8deb0
[ 9.582292] </TASK>
[ 9.582293] ---[ end trace 0000000000000000 ]---
Link: https://lore.kernel.org/20260331081312.123719-1-hao.ge@linux.dev
Fixes: dcfe378c81f72 ("lib: introduce support for page allocation tagging")
Signed-off-by: Hao Ge <hao.ge@linux.dev>
Suggested-by: Suren Baghdasaryan <surenb@google.com>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d239462787b072c78eb19fc1f155c3d411256282 upstream.
Droppable mappings must not be lockable. There is a check for VMAs with
VM_DROPPABLE set in mlock_fixup() along with checks for other types of
unlockable VMAs which ensures this when calling mlock()/mlock2().
For mlockall(MCL_FUTURE), the check for unlockable VMAs is different. In
apply_mlockall_flags(), if the flags parameter has MCL_FUTURE set, the
current task's mm's default VMA flag field mm->def_flags has VM_LOCKED
applied to it. VM_LOCKONFAULT is also applied if MCL_ONFAULT is also set.
When these flags are set as default in this manner they are cleared in
__mmap_complete() for new mappings that do not support mlock. A check for
VM_DROPPABLE in __mmap_complete() is missing resulting in droppable
mappings created with VM_LOCKED set. To fix this and reduce that chance
of similar bugs in the future, introduce and use vma_supports_mlock().
Link: https://lkml.kernel.org/r/20260310155821.17869-1-anthony.yznaga@oracle.com
Fixes: 9651fcedf7b9 ("mm: add MAP_DROPPABLE for designating always lazily freeable mappings")
Signed-off-by: Anthony Yznaga <anthony.yznaga@oracle.com>
Suggested-by: David Hildenbrand <david@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Tested-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jason A. Donenfeld <jason@zx2c4.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f72e77c33e4b5657af35125e75bab249256030f3 upstream.
In various places in the kernel, we modify the fwnode "flags" member
by doing either:
fwnode->flags |= SOME_FLAG;
fwnode->flags &= ~SOME_FLAG;
This type of modification is not thread-safe. If two threads are both
mucking with the flags at the same time then one can clobber the
other.
While flags are often modified while under the "fwnode_link_lock",
this is not universally true.
Create some accessor functions for setting, clearing, and testing the
FWNODE flags and move all users to these accessor functions. New
accessor functions use set_bit() and clear_bit(), which are
thread-safe.
Cc: stable@vger.kernel.org
Fixes: c2c724c868c4 ("driver core: Add fw_devlink_parse_fwtree()")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Saravana Kannan <saravanak@kernel.org>
Link: https://patch.msgid.link/20260317090112.v2.1.I0a4d03104ecd5103df3d76f66c8d21b1d15a2e38@changeid
[ Fix fwnode_clear_flag() argument alignment, restore dropped blank
line in fwnode_dev_initialized(), and remove unnecessary parentheses
around fwnode_test_flag() calls. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a2225b6e834a838ae3c93709760edc0a169eb2f2 upstream.
The moment we link a "struct device" into the list of devices for the
bus, it's possible probe can happen. This is because another thread
can load the driver at any time and that can cause the device to
probe. This has been seen in practice with a stack crawl that looks
like this [1]:
really_probe()
__driver_probe_device()
driver_probe_device()
__driver_attach()
bus_for_each_dev()
driver_attach()
bus_add_driver()
driver_register()
__platform_driver_register()
init_module() [some module]
do_one_initcall()
do_init_module()
load_module()
__arm64_sys_finit_module()
invoke_syscall()
As a result of the above, it was seen that device_links_driver_bound()
could be called for the device before "dev->fwnode->dev" was
assigned. This prevented __fw_devlink_pickup_dangling_consumers() from
being called which meant that other devices waiting on our driver's
sub-nodes were stuck deferring forever.
It's believed that this problem is showing up suddenly for two
reasons:
1. Android has recently (last ~1 year) implemented an optimization to
the order it loads modules [2]. When devices opt-in to this faster
loading, modules are loaded one-after-the-other very quickly. This
is unlike how other distributions do it. The reproduction of this
problem has only been seen on devices that opt-in to Android's
"parallel module loading".
2. Android devices typically opt-in to fw_devlink, and the most
noticeable issue is the NULL "dev->fwnode->dev" in
device_links_driver_bound(). fw_devlink is somewhat new code and
also not in use by all Linux devices.
Even though the specific symptom where "dev->fwnode->dev" wasn't
assigned could be fixed by moving that assignment higher in
device_add(), other parts of device_add() (like the call to
device_pm_add()) are also important to run before probe. Only moving
the "dev->fwnode->dev" assignment would likely fix the current
symptoms but lead to difficult-to-debug problems in the future.
Fix the problem by preventing probe until device_add() has run far
enough that the device is ready to probe. If somehow we end up trying
to probe before we're allowed, __driver_probe_device() will return
-EPROBE_DEFER which will make certain the device is noticed.
In the race condition that was seen with Android's faster module
loading, we will temporarily add the device to the deferred list and
then take it off immediately when device_add() probes the device.
Instead of adding another flag to the bitfields already in "struct
device", instead add a new "flags" field and use that. This allows us
to freely change the bit from different thread without worrying about
corrupting nearby bits (and means threads changing other bit won't
corrupt us).
[1] Captured on a machine running a downstream 6.6 kernel
[2] https://cs.android.com/android/platform/superproject/main/+/main:system/core/libmodprobe/libmodprobe.cpp?q=LoadModulesParallel
Cc: stable@vger.kernel.org
Fixes: 2023c610dc54 ("Driver core: add new device to bus's list before probing")
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260406162231.v5.1.Id750b0fbcc94f23ed04b7aecabcead688d0d8c17@changeid
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 25e531b422dc2ac90cdae3b6e74b5cdeb081440d upstream.
xHCI hardware maintains its endpoint state between add_endpoint()
and drop_endpoint() calls followed by successful check_bandwidth().
So does the driver.
Core may call endpoint_disable() during xHCI endpoint life, so don't
clear host_ep->hcpriv then, because this breaks endpoint_reset().
If a driver calls usb_set_interface(), submits URBs which make host
sequence state non-zero and calls usb_clear_halt(), the device clears
its sequence state but xhci_endpoint_reset() bails out. The next URB
malfunctions: USB2 loses one packet, USB3 gets Transaction Error or
may not complete at all on some (buggy?) HCs from ASMedia and AMD.
This is triggered by uvcvideo on bulk video devices.
The code was copied from ehci_endpoint_disable() but it isn't needed
here - hcpriv should only be NULL on emulated root hub endpoints.
It might prevent resetting and inadvertently enabling a disabled and
dropped endpoint, but core shouldn't try to reset dropped endpoints.
Document xhci requirements regarding hcpriv. They are currently met.
Fixes: 18b74067ac78 ("xhci: Fix use-after-free regression in xhci clear hub TT implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-26-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0217c7fb4de4a40cee667eb21901f3204effe5ac upstream.
In mfill_atomic_hugetlb(), linear_page_index() is used to calculate the
page index for hugetlb_fault_mutex_hash(). However, linear_page_index()
returns the index in PAGE_SIZE units, while hugetlb_fault_mutex_hash()
expects the index in huge page units. This mismatch means that different
addresses within the same huge page can produce different hash values,
leading to the use of different mutexes for the same huge page. This can
cause races between faulting threads, which can corrupt the reservation
map and trigger the BUG_ON in resv_map_release().
Fix this by introducing hugetlb_linear_page_index(), which returns the
page index in huge page granularity, and using it in place of
linear_page_index().
Link: https://lkml.kernel.org/r/20260310110526.335749-1-jianhuizzzzz@gmail.com
Fixes: a08c7193e4f1 ("mm/filemap: remove hugetlb special casing in filemap.c")
Signed-off-by: Jianhui Zhou <jianhuizzzzz@gmail.com>
Reported-by: syzbot+f525fd79634858f478e7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f525fd79634858f478e7
Acked-by: SeongJae Park <sj@kernel.org>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: JonasZhou <JonasZhou@zhaoxin.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0b16e69d17d8c35c5c9d5918bf596c75a44655d3 upstream.
When exiting to userspace to service an emulated MMIO write, copy the
to-be-written value to a scratch field in the MMIO fragment if the size
of the data payload is 8 bytes or less, i.e. can fit in a single chunk,
instead of pointing the fragment directly at the source value.
This fixes a class of use-after-free bugs that occur when the emulator
initiates a write using an on-stack, local variable as the source, the
write splits a page boundary, *and* both pages are MMIO pages. Because
KVM's ABI only allows for physically contiguous MMIO requests, accesses
that split MMIO pages are separated into two fragments, and are sent to
userspace one at a time. When KVM attempts to complete userspace MMIO in
response to KVM_RUN after the first fragment, KVM will detect the second
fragment and generate a second userspace exit, and reference the on-stack
variable.
The issue is most visible if the second KVM_RUN is performed by a separate
task, in which case the stack of the initiating task can show up as truly
freed data.
==================================================================
BUG: KASAN: use-after-free in complete_emulated_mmio+0x305/0x420
Read of size 1 at addr ffff888009c378d1 by task syz-executor417/984
CPU: 1 PID: 984 Comm: syz-executor417 Not tainted 5.10.0-182.0.0.95.h2627.eulerosv2r13.x86_64 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Call Trace:
dump_stack+0xbe/0xfd
print_address_description.constprop.0+0x19/0x170
__kasan_report.cold+0x6c/0x84
kasan_report+0x3a/0x50
check_memory_region+0xfd/0x1f0
memcpy+0x20/0x60
complete_emulated_mmio+0x305/0x420
kvm_arch_vcpu_ioctl_run+0x63f/0x6d0
kvm_vcpu_ioctl+0x413/0xb20
__se_sys_ioctl+0x111/0x160
do_syscall_64+0x30/0x40
entry_SYSCALL_64_after_hwframe+0x67/0xd1
RIP: 0033:0x42477d
Code: <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007faa8e6890e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000004d7338 RCX: 000000000042477d
RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 0000000000000005
RBP: 00000000004d7330 R08: 00007fff28d546df R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004d733c
R13: 0000000000000000 R14: 000000000040a200 R15: 00007fff28d54720
The buggy address belongs to the page:
page:0000000029f6a428 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9c37
flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0000000 0000000000000000 ffffea0000270dc8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888009c37780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888009c37800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff888009c37880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff888009c37900: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888009c37980: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
The bug can also be reproduced with a targeted KVM-Unit-Test by hacking
KVM to fill a large on-stack variable in complete_emulated_mmio(), i.e. by
overwrite the data value with garbage.
Limit the use of the scratch fields to 8-byte or smaller accesses, and to
just writes, as larger accesses and reads are not affected thanks to
implementation details in the emulator, but add a sanity check to ensure
those details don't change in the future. Specifically, KVM never uses
on-stack variables for accesses larger that 8 bytes, e.g. uses an operand
in the emulator context, and *all* reads are buffered through the mem_read
cache.
Note! Using the scratch field for reads is not only unnecessary, it's
also extremely difficult to handle correctly. As above, KVM buffers all
reads through the mem_read cache, and heavily relies on that behavior when
re-emulating the instruction after a userspace MMIO read exit. If a read
splits a page, the first page is NOT an MMIO page, and the second page IS
an MMIO page, then the MMIO fragment needs to point at _just_ the second
chunk of the destination, i.e. its position in the mem_read cache. Taking
the "obvious" approach of copying the fragment value into the destination
when re-emulating the instruction would clobber the first chunk of the
destination, i.e. would clobber the data that was read from guest memory.
Fixes: f78146b0f923 ("KVM: Fix page-crossing MMIO")
Suggested-by: Yashu Zhang <zhangjiaji1@huawei.com>
Reported-by: Yashu Zhang <zhangjiaji1@huawei.com>
Closes: https://lore.kernel.org/all/369eaaa2b3c1425c85e8477066391bc7@huawei.com
Cc: stable@vger.kernel.org
Tested-by: Tom Lendacky <thomas.lendacky@gmail.com>
Tested-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Link: https://patch.msgid.link/20260225012049.920665-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5de7bcaadf160c1716b20a263cf8f5b06f658959 upstream.
Similarly to the previous commit, this renames the somewhat confusingly
named function. But in this case, it was at least less confusing: the
__copy_from_user_inatomic_nocache is indeed copying from user memory,
and it is indeed ok to be used in an atomic context, so it will not warn
about it.
But the previous commit also removed the NTB mis-use of the
__copy_from_user_inatomic_nocache() function, and as a result every
call-site is now _actually_ doing a real user copy. That means that we
can now do the proper user pointer verification too.
End result: add proper address checking, remove the double underscores,
and change the "nocache" to "nontemporal" to more accurately describe
what this x86-only function actually does. It might be worth noting
that only the target is non-temporal: the actual user accesses are
normal memory accesses.
Also worth noting is that non-x86 targets (and on older 32-bit x86 CPU's
before XMM2 in the Pentium III) we end up just falling back on a regular
user copy, so nothing can actually depend on the non-temporal semantics,
but that has always been true.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 624bf3440d7214b62c22d698a0a294323f331d5d upstream.
Reject LAUNCH_FINISH for SEV-ES and SNP VMs if KVM is actively creating
one or more vCPUs, as KVM needs to process and encrypt each vCPU's VMSA.
Letting userspace create vCPUs while LAUNCH_FINISH is in-progress is
"fine", at least in the current code base, as kvm_for_each_vcpu() operates
on online_vcpus, LAUNCH_FINISH (all SEV+ sub-ioctls) holds kvm->mutex, and
fully onlining a vCPU in kvm_vm_ioctl_create_vcpu() is done under
kvm->mutex. I.e. there's no difference between an in-progress vCPU and a
vCPU that is created entirely after LAUNCH_FINISH.
However, given that concurrent LAUNCH_FINISH and vCPU creation can't
possibly work (for any reasonable definition of "work"), since userspace
can't guarantee whether a particular vCPU will be encrypted or not,
disallow the combination as a hardening measure, to reduce the probability
of introducing bugs in the future, and to avoid having to reason about the
safety of future changes related to LAUNCH_FINISH.
Cc: Jethro Beekman <jethro@fortanix.com>
Closes: https://lore.kernel.org/all/b31f7c6e-2807-4662-bcdd-eea2c1e132fa@fortanix.com
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260310234829.2608037-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"Two fixes for the time/timers subsystem:
- Invert the inverted fastpath decision in check_tick_dependency(),
which prevents NOHZ full to stop the tick. That's a regression
introduced in the 7.0 merge window.
- Prevent a unpriviledged DoS in the clockevents code, where user
space can starve the timer interrupt by arming a timerfd or posix
interval timer in a tight loop with an absolute expiry time in the
past. The fix turned out to be incomplete and was was amended
yesterday to make it work on some 20 years old AMD machines as
well. All issues with it have been confirmed to be resolved by
various reporters"
* tag 'timers-urgent-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clockevents: Prevent timer interrupt starvation
tick/nohz: Fix inverted return value in check_tick_dependency() fast path
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"Before v7.0 is released, fix a few issues with the CFI patchset,
merged earlier in v7.0-rc, that primarily affect interfaces to
non-kernel code:
- Improve the prctl() interface for per-task indirect branch landing
pad control to expand abbreviations and to resemble the speculation
control prctl() interface
- Expand the "LP" and "SS" abbreviations in the ptrace uapi header
file to "branch landing pad" and "shadow stack", to improve
readability
- Fix a typo in a CFI-related macro name in the ptrace uapi header
file
- Ensure that the indirect branch tracking state and shadow stack
state are unlocked immediately after an exec() on the new task so
that libc subsequently can control it
- While working in this area, clean up the kernel-internal,
cross-architecture prctl() function names by expanding the
abbreviations mentioned above"
* tag 'riscv-for-linus-v7.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
prctl: cfi: change the branch landing pad prctl()s to be more descriptive
riscv: ptrace: cfi: expand "SS" references to "shadow stack" in uapi headers
prctl: rename branch landing pad implementation functions to be more explicit
riscv: ptrace: expand "LP" references to "branch landing pads" in uapi headers
riscv: cfi: clear CFI lock status in start_thread()
riscv: ptrace: cfi: fix "PRACE" typo in uapi header
|
|
Calvin reported an odd NMI watchdog lockup which claims that the CPU locked
up in user space. He provided a reproducer, which sets up a timerfd based
timer and then rearms it in a loop with an absolute expiry time of 1ns.
As the expiry time is in the past, the timer ends up as the first expiring
timer in the per CPU hrtimer base and the clockevent device is programmed
with the minimum delta value. If the machine is fast enough, this ends up
in a endless loop of programming the delta value to the minimum value
defined by the clock event device, before the timer interrupt can fire,
which starves the interrupt and consequently triggers the lockup detector
because the hrtimer callback of the lockup mechanism is never invoked.
As a first step to prevent this, avoid reprogramming the clock event device
when:
- a forced minimum delta event is pending
- the new expiry delta is less then or equal to the minimum delta
Thanks to Calvin for providing the reproducer and to Borislav for testing
and providing data from his Zen5 machine.
The problem is not limited to Zen5, but depending on the underlying
clock event device (e.g. TSC deadline timer on Intel) and the CPU speed
not necessarily observable.
This change serves only as the last resort and further changes will be made
to prevent this scenario earlier in the call chain as far as possible.
[ tglx: Updated to restore the old behaviour vs. !force and delta <= 0 and
fixed up the tick-broadcast handlers as pointed out by Borislav ]
Fixes: d316c57ff6bf ("[PATCH] clockevents: add core functionality")
Reported-by: Calvin Owens <calvin@wbinvd.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Calvin Owens <calvin@wbinvd.org>
Tested-by: Borislav Petkov <bp@alien8.de>
Link: https://lore.kernel.org/lkml/acMe-QZUel-bBYUh@mozart.vkv.me/
Link: https://patch.msgid.link/20260407083247.562657657@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"The kernfs rbtree is keyed by (hash, ns, name) where the hash
is seeded with the raw namespace pointer via init_name_hash(ns).
The resulting hash values are exposed to userspace through
readdir seek positions, and the pointer-based ordering in
kernfs_name_compare() is observable through entry order.
Switch from raw pointers to ns_common::ns_id for both hashing
and comparison.
A preparatory commit first replaces all const void * namespace
parameters with const struct ns_common * throughout kernfs, sysfs,
and kobject so the code can access ns->ns_id. Also compare the
ns_id when hashes match in the rbtree to handle crafted collisions.
Also fix eventpoll RCU grace period issue and a cachefiles refcount
problem"
* tag 'vfs-7.0-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
kernfs: make directory seek namespace-aware
kernfs: use namespace id instead of pointer for hashing and comparison
kernfs: pass struct ns_common instead of const void * for namespace tags
eventpoll: defer struct eventpoll free to RCU grace period
cachefiles: fix incorrect dentry refcount in cachefiles_cull()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fixes from Ulf Hansson:
- imx: Prevent hang at power down for imx8mp-blk-ctrl
- thead: Fix buffer overflow for TH1520 AON driver
- Change Ulf Hansson's email
* tag 'pmdomain-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
MAINTAINERS, mailmap: Change Ulf Hansson's email
pmdomain: imx8mp-blk-ctrl: Keep the NOC_HDCP clock enabled
firmware: thead: Fix buffer overflow and use standard endian macros
|
|
kernfs has historically used const void * to pass around namespace tags
used for directory-level namespace filtering. The only current user of
this is sysfs network namespace tagging where struct net pointers are
cast to void *.
Replace all const void * namespace parameters with const struct
ns_common * throughout the kernfs, sysfs, and kobject namespace layers.
This includes the kobj_ns_type_operations callbacks, kobject_namespace(),
and all sysfs/kernfs APIs that accept or return namespace tags.
Passing struct ns_common is needed because various codepaths require
access to the underlying namespace. A struct ns_common can always be
converted back to the concrete namespace type (e.g., struct net) via
container_of() or to_ns_common() in the reverse direction.
This is a preparatory change for switching to ns_id-based directory
iteration to prevent a KASLR pointer leak through the current use of
raw namespace pointers as hash seeds and comparison keys.
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
김영민 reports that shstk_pop_sigframe() doesn't check for errors from
mmap_read_lock_killable(), which is a silly oversight, and also shows
that we haven't marked those functions with "__must_check", which would
have immediately caught it.
So let's fix both issues.
Reported-by: 김영민 <osori@hspace.io>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"The largest part here are devicetree fixes for Qualcomm, and NXP i.MX,
addressing a few regressions and incorrect settings in board and SoC
pecific dts files.
The largest single commits are a revert of a cleanup patch for i.MX
that caused regressions for the NAND flash controller and a fixup for
an incomplete cleanup of the PCIe controller on Qualcomm platforms
that broke because the state was left incompatible with both the old
and new behavior.
On the Rockchips, Hisilicon, Renesas, Allwinner and AT91 platforms,
only a single simple dts bugfix each was added since the last round of
fixes.
On the SoC specific device drivers, everything is relatively harmless:
three reset controller driver fixes, a compatibility for fix ASpeed
soc ID, and error handling fixes for Qualcomm and Microchip. One
regression fix on Qualcomm addresses a problem with a previous fix for
DisplayPort alt mode"
* tag 'soc-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
arm64: dts: qcom: hamoa: Fix incomplete Root Port property migration
dt-bindings: display/msm: qcm2290-mdss: Fix missing ranges in example
firmware: microchip: fail auto-update probe if no flash found
arm64: dts: renesas: sparrow-hawk: Reserve first 128 MiB of DRAM
arm64: dts: qcom: agatti: Fix IOMMU DT properties
dt-bindings: media: venus: Fix iommus property
dt-bindings: display: msm: qcm2290-mdss: Fix iommus property
arm64: dts: allwinner: sun55i: Fix r-spi DMA
reset: spacemit: k3: Decouple composite reset lines
reset: gpio: fix double free in reset_add_gpio_aux_device() error path
ARM: dts: microchip: sam9x7: fix gpio-lines count for pioB
arm64: dts: hisilicon: hi3798cv200: Add missing dma-ranges
arm64: dts: hisilicon: poplar: Correct PCIe reset GPIO polarity
reset: rzg2l-usbphy-ctrl: Fix malformed MODULE_AUTHOR string
soc: microchip: mpfs-mss-top-sysreg: Fix resource leak on driver unbind
soc: microchip: mpfs-control-scb: Fix resource leak on driver unbind
soc: qcom: pmic_glink_altmode: Fix TBT->SAFE->!TBT transition
arm64: dts: qcom: monaco: Reserve full Gunyah metadata region
arm64: dts: imx8mq-librem5: Bump BUCK1 suspend voltage up to 0.85V
Revert "arm64: dts: imx8mq-librem5: Set the DVS voltages lower"
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/iio driver fixes from Greg KH:
"Here are a relativly large number of small char/misc/iio and other
driver fixes for 7.0-rc7. There's a bunch, but overall they are all
small fixes for issues that people have been having that I finally
caught up with getting merged due to delays on my end.
The "largest" change overall is just some documentation updates to the
security-bugs.rst file to hopefully tell the AI tools (and any users
that actually read the documentation), how to send us better security
bug reports as the quantity of reports these past few weeks has
increased dramatically due to tools getting better at "finding"
things.
Included in here are:
- lots of small IIO driver fixes for issues reported in 7.0-rc
- gpib driver fixes
- comedi driver fixes
- interconnect driver fix
- nvmem driver fixes
- mei driver fix
- counter driver fix
- binder rust driver fixes
- some other small misc driver fixes
All of these have been in linux-next this week with no reported issues"
* tag 'char-misc-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (63 commits)
Documentation: fix two typos in latest update to the security report howto
Documentation: clarify the mandatory and desirable info for security reports
Documentation: explain how to find maintainers addresses for security reports
Documentation: minor updates to the security contacts
.get_maintainer.ignore: add myself
nvmem: zynqmp_nvmem: Fix buffer size in DMA and memcpy
nvmem: imx: assign nvmem_cell_info::raw_len
misc: fastrpc: check qcom_scm_assign_mem() return in rpmsg_probe
misc: fastrpc: possible double-free of cctx->remote_heap
comedi: dt2815: add hardware detection to prevent crash
comedi: runflags cannot determine whether to reclaim chanlist
comedi: Reinit dev->spinlock between attachments to low-level drivers
comedi: me_daq: Fix potential overrun of firmware buffer
comedi: me4000: Fix potential overrun of firmware buffer
comedi: ni_atmio16d: Fix invalid clean-up after failed attach
gpib: fix use-after-free in IO ioctl handlers
gpib: lpvo_usb: fix memory leak on disconnect
gpib: Fix fluke driver s390 compile issue
lis3lv02d: Omit IRQF_ONESHOT if no threaded handler is provided
lis3lv02d: fix kernel-doc warnings
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are a bunch of USB and Thunderbolt fixes (most all are USB) for
7.0-rc7. More than I normally like this late in the release cycle,
partly due to my recent travels, and partly due to people banging away
on the USB gadget interfaces and apis more than normal (big shoutout
to Android for getting the vendors to actually work upstream on this,
that's a huge win overall for everyone here)
Included in here are:
- Small thunderbolt fix
- new USB serial driver ids added
- typec driver fixes
- gadget driver fixes for some disconnect issues
- other usb gadget driver fixes for reported problems with binding
and unbinding devices as happens when a gadget device connects /
disconnects from a system it is plugged into (or it switches device
mode at a user's request, these things are complex little
beasts...)
- usb offload fixes (where USB audio tunnels through the controller
while the main CPU is asleep) for when EMP spikes hit the system
causing disconnects to happen (as often happens with static
electricity in the winter months). This has been much reported by
at least one vendor, and resolves the issues they have been seeing
with this codepath. Can't wait for the "formal methods are the
answer!" people to try to model that one properly...
- Other small usb driver fixes for issues reported.
All of these have been in linux-next this week, and before, with no
reported issues, and I've personally been stressing these harder than
normal on my systems here with no problems"
* tag 'usb-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (39 commits)
usb: gadget: f_hid: move list and spinlock inits from bind to alloc
usb: host: xhci-sideband: delegate offload_usage tracking to class drivers
usb: core: use dedicated spinlock for offload state
usb: cdns3: gadget: fix state inconsistency on gadget init failure
usb: dwc3: imx8mp: fix memory leak on probe failure path
usb: gadget: f_uac1_legacy: validate control request size
usb: ulpi: fix double free in ulpi_register_interface() error path
usb: misc: usbio: Fix URB memory leak on submit failure
USB: core: add NO_LPM quirk for Razer Kiyo Pro webcam
usb: cdns3: gadget: fix NULL pointer dereference in ep_queue
usb: core: phy: avoid double use of 'usb3-phy'
USB: serial: option: add MeiG Smart SRM825WN
usb: gadget: f_rndis: Fix net_device lifecycle with device_move
usb: gadget: f_subset: Fix net_device lifecycle with device_move
usb: gadget: f_eem: Fix net_device lifecycle with device_move
usb: gadget: f_ecm: Fix net_device lifecycle with device_move
usb: gadget: u_ncm: Add kernel-doc comments for struct f_ncm_opts
usb: gadget: f_rndis: Protect RNDIS options with mutex
usb: gadget: f_subset: Fix unbalanced refcnt in geth_free
dt-bindings: connector: add pd-disable dependency
...
|
|
Per Linus' comments about the unreadability of abbreviations such as
"indir_br_lp", rename the three prctl() implementation functions to be more
explicit. This involves renaming "indir_br_lp_status" in the function
names to "branch_landing_pad_state".
While here, add _prctl_ into the function names, following the
speculation control prctl implementation functions.
Link: https://lore.kernel.org/linux-riscv/CAHk-=whhSLGZAx3N5jJpb4GLFDqH_QvS07D+6BnkPWmCEzTAgw@mail.gmail.com/
Cc: Deepak Gupta <debug@rivosinc.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix kerneldocs for gpio-timberdale and gpio-nomadik
- clear the "requested" flag in error path in gpiod_request_commit()
- call of_xlate() if provided when setting up shared GPIOs
- handle pins shared by child firmware nodes of consumer devices
- fix return value check in gpio-qixis-fpga
- fix suspend on gpio-mxc
- fix gpio-microchip DT bindings
* tag 'gpio-fixes-for-v7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
dt-bindings: gpio: fix microchip #interrupt-cells
gpio: shared: shorten the critical section in gpiochip_setup_shared()
gpio: mxc: map Both Edge pad wakeup to Rising Edge
gpio: qixis-fpga: Fix error handling for devm_regmap_init_mmio()
gpio: shared: handle pins shared by child nodes of devices
gpio: shared: call gpio_chip::of_xlate() if set
gpiolib: clear requested flag if line is invalid
gpio: nomadik: repair some kernel-doc comments
gpio: timberdale: repair kernel-doc comments
gpio: Fix resource leaks on errors in gpiochip_add_data_with_key()
|
|
Pull bpf fixes from Alexei Starovoitov:
- Fix register equivalence for pointers to packet (Alexei Starovoitov)
- Fix incorrect pruning due to atomic fetch precision tracking (Daniel
Borkmann)
- Fix grace period wait for bpf_link-ed tracepoints (Kumar Kartikeya
Dwivedi)
- Fix use-after-free of sockmap's sk->sk_socket (Kuniyuki Iwashima)
- Reject direct access to nullable PTR_TO_BUF pointers (Qi Tang)
- Reject sleepable kprobe_multi programs at attach time (Varun R
Mallya)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add more precision tracking tests for atomics
bpf: Fix incorrect pruning due to atomic fetch precision tracking
bpf: Reject sleepable kprobe_multi programs at attach time
bpf: reject direct access to nullable PTR_TO_BUF pointers
bpf: sockmap: Fix use-after-free of sk->sk_socket in sk_psock_verdict_data_ready().
bpf: Fix grace period wait for tracepoint bpf_link
bpf: Fix regsafe() for pointers to packet
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"With fixes from wireless, bluetooth and netfilter included we're back
to each PR carrying 30%+ more fixes than in previous era.
The good news is that so far none of the "extra" fixes are themselves
causing real regressions. Not sure how much comfort that is.
Current release - fix to a fix:
- netdevsim: fix build if SKB_EXTENSIONS=n
- eth: stmmac: skip VLAN restore when VLAN hash ops are missing
Previous releases - regressions:
- wifi: iwlwifi: mvm: don't send a 6E related command when
not supported
Previous releases - always broken:
- some info leak fixes
- add missing clearing of skb->cb[] on ICMP paths from tunnels
- ipv6:
- flowlabel: defer exclusive option free until RCU teardown
- avoid overflows in ip6_datagram_send_ctl()
- mpls: add seqcount to protect platform_labels from OOB access
- bridge: improve safety of parsing ND options
- bluetooth: fix leaks, overflows and races in hci_sync
- netfilter: add more input validation, some to address bugs directly
some to prevent exploits from cooking up broken configurations
- wifi:
- ath: avoid poor performance due to stopping the wrong
aggregation session
- virt_wifi: remove SET_NETDEV_DEV to avoid use-after-free
- eth:
- fec: fix the PTP periodic output sysfs interface
- enetc: safely reinitialize TX BD ring when it has unsent frames"
* tag 'net-7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
eth: fbnic: Increase FBNIC_QUEUE_SIZE_MIN to 64
ipv6: avoid overflows in ip6_datagram_send_ctl()
net: hsr: fix VLAN add unwind on slave errors
net: hsr: serialize seq_blocks merge across nodes
vsock: initialize child_ns_mode_locked in vsock_net_init()
selftests/tc-testing: add tests for cls_fw and cls_flow on shared blocks
net/sched: cls_flow: fix NULL pointer dereference on shared blocks
net/sched: cls_fw: fix NULL pointer dereference on shared blocks
net/x25: Fix overflow when accumulating packets
net/x25: Fix potential double free of skb
bnxt_en: Restore default stat ctxs for ULP when resource is available
bnxt_en: Don't assume XDP is never enabled in bnxt_init_dflt_ring_mode()
bnxt_en: Refactor some basic ring setup and adjustment logic
net/mlx5: Fix switchdev mode rollback in case of failure
net/mlx5: Avoid "No data available" when FW version queries fail
net/mlx5: lag: Check for LAG device before creating debugfs
net: macb: properly unregister fixed rate clocks
net: macb: fix clk handling on PCI glue driver removal
virtio_net: clamp rss_max_key_size to NETDEV_RSS_KEY_LEN
net/sched: sch_netem: fix out-of-bounds access in packet corruption
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- IOMMU-PT related compile breakage in for AMD driver
- IOTLB flushing behavior when unmapped region is larger than requested
due to page-sizes
- Fix IOTLB flush behavior with empty gathers
* tag 'iommu-fixes-v7.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommupt/amdv1: mark amdv1pt_install_leaf_entry as __always_inline
iommupt: Fix short gather if the unmap goes into a large mapping
iommu: Do not call drivers for empty gathers
|
|
Replace the coarse USB device lock with a dedicated offload_lock
spinlock to reduce contention during offload operations. Use
offload_pm_locked to synchronize with PM transitions and replace
the legacy offload_at_suspend flag.
Optimize usb_offload_get/put by switching from auto-resume/suspend
to pm_runtime_get_if_active(). This ensures offload state is only
modified when the device is already active, avoiding unnecessary
power transitions.
Cc: stable <stable@kernel.org>
Fixes: ef82a4803aab ("xhci: sideband: add api to trace sideband usage")
Signed-off-by: Guan-Yu Lin <guanyulin@google.com>
Tested-by: Hailong Liu <hailong.liu@oppo.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260401123238.3790062-2-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v7.0
Fix the length of the PD restart reason string in pd-mapper to avoid
QMI decoding errors, resulting in the notification being dropped.
Fix the newly introduce handling of TBT/USB4 notifications in pmic_glink
altmode driver, as it broke the handling of non-TBT/USB4 DisplayPort
unplug events.
* tag 'qcom-drivers-fixes-for-7.0' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pmic_glink_altmode: Fix TBT->SAFE->!TBT transition
soc: qcom: pmic_glink_altmode: Fix SVID=DP && unconnected edge case
soc: qcom: pd-mapper: Fix element length in servreg_loc_pfr_req_ei
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
|
Addresses two issues in the TH1520 AON firmware protocol driver:
1. Fix a potential buffer overflow where the code used unsafe pointer
arithmetic to access the 'mode' field through the 'resource' pointer
with an offset. This was flagged by Smatch static checker as:
"buffer overflow 'data' 2 <= 3"
2. Replace custom RPC_SET_BE* and RPC_GET_BE* macros with standard
kernel endianness conversion macros (cpu_to_be16, etc.) for better
portability and maintainability.
The functionality was re-tested with the GPU power-up sequence,
confirming the GPU powers up correctly and the driver probes
successfully.
[ 12.702370] powervr ffef400000.gpu: [drm] loaded firmware
powervr/rogue_36.52.104.182_v1.fw
[ 12.711043] powervr ffef400000.gpu: [drm] FW version v1.0 (build
6645434 OS)
[ 12.719787] [drm] Initialized powervr 1.0.0 for ffef400000.gpu on
minor 0
Fixes: e4b3cbd840e5 ("firmware: thead: Add AON firmware protocol driver")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/17a0ccce-060b-4b9d-a3c4-8d5d5823b1c9@stanley.mountain/
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Drew Fustini <fustini@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
IPSET_ATTR_NAME and IPSET_ATTR_NAMEREF are of NLA_STRING type, they
cannot be treated like a c-string.
They either have to be switched to NLA_NUL_STRING, or the compare
operations need to use the nla functions.
Fixes: f830837f0eed ("netfilter: ipset: list:set set type support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use the correct kernel-doc format to avoid kernel-doc warnings:
Warning: include/linux/lis3lv02d.h:125 struct member 'st_min_limits' not
described in 'lis3lv02d_platform_data'
Warning: include/linux/lis3lv02d.h:125 struct member 'st_max_limits' not
described in 'lis3lv02d_platform_data'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260312051400.682991-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Recently, tracepoints were switched from using disabled preemption
(which acts as RCU read section) to SRCU-fast when they are not
faultable. This means that to do a proper grace period wait for programs
running in such tracepoints, we must use SRCU's grace period wait.
This is only for non-faultable tracepoints, faultable ones continue
using RCU Tasks Trace.
However, bpf_link_free() currently does call_rcu() for all cases when
the link is non-sleepable (hence, for tracepoints, non-faultable). Fix
this by doing a call_srcu() grace period wait.
As far RCU Tasks Trace gp -> RCU gp chaining is concerned, it is deemed
unnecessary for tracepoint programs. The link and program are either
accessed under RCU Tasks Trace protection, or SRCU-fast protection now.
The earlier logic of chaining both RCU Tasks Trace and RCU gp waits was
to generalize the logic, even if it conceded an extra RCU gp wait,
however that is unnecessary for tracepoints even before this change.
In practice no cost was paid since rcu_trace_implies_rcu_gp() was always
true. Hence we need not chaining any RCU gp after the SRCU gp.
For instance, in the non-faultable raw tracepoint, the RCU read section
of the program in __bpf_trace_run() is enclosed in the SRCU gp, likewise
for faultable raw tracepoint, the program is under the RCU Tasks Trace
protection. Hence, the outermost scope can be waited upon to ensure
correctness.
Also, sleepable programs cannot be attached to non-faultable
tracepoints, so whenever program or link is sleepable, only RCU Tasks
Trace protection is being used for the link and prog.
Fixes: a46023d5616e ("tracing: Guard __DECLARE_TRACE() use of __DO_TRACE_CALL() with SRCU-fast")
Reviewed-by: Sun Jian <sun.jian.kdev@gmail.com>
Reviewed-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20260331211021.1632902-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix cgroup rmdir racing with dying tasks.
Deferred task cgroup unlink introduced a window where cgroup.procs
is empty but the cgroup is still populated, causing rmdir to fail
with -EBUSY and selftest failures.
Make rmdir wait for dying tasks to fully leave and fix selftests to
not depend on synchronous populated updates.
- Fix cpuset v1 task migration failure from empty cpusets under strict
security policies.
When CPU hotplug removes the last CPU from a v1 cpuset, tasks must be
migrated to an ancestor without a security_task_setscheduler() check
that would block the migration.
* tag 'cgroup-for-7.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Skip security check for hotplug induced v1 task migration
cgroup/cpuset: Simplify setsched decision check in task iteration loop of cpuset_can_attach()
cgroup: Fix cgroup_drain_dying() testing the wrong condition
selftests/cgroup: Don't require synchronous populated update on task exit
cgroup: Wait for dying tasks to leave on rmdir
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull udf fix from Jan Kara:
"Fix for a race in UDF that can lead to memory corruption"
* tag 'fs_for_v7.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix race between file type conversion and writeback
mpage: Provide variant of mpage_writepages() with own optional folio handler
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix netfs_limit_iter() hitting BUG() when an ITER_KVEC iterator
reaches it via core dump writes to 9P filesystems. Add ITER_KVEC
handling following the same pattern as the existing ITER_BVEC code.
- Fix a NULL pointer dereference in the netfs unbuffered write retry
path when the filesystem (e.g., 9P) doesn't set the prepare_write
operation.
- Clear I_DIRTY_TIME in sync_lazytime for filesystems implementing
->sync_lazytime. Without this the flag stays set and may cause
additional unnecessary calls during inode deactivation.
- Increase tmpfs size in mount_setattr selftests. A recent commit
bumped the ext4 image size to 2 GB but didn't adjust the tmpfs
backing store, so mkfs.ext4 fails with ENOSPC writing metadata.
- Fix an invalid folio access in iomap when i_blkbits matches the folio
size but differs from the I/O granularity. The cur_folio pointer
would not get invalidated and iomap_read_end() would still be called
on it despite the IO helper owning it.
- Fix hash_name() docstring.
- Fix read abandonment during netfs retry where the subreq variable
used for abandonment could be uninitialized on the first pass or
point to a deleted subrequest on later passes.
- Don't block sync for filesystems with no data integrity guarantees.
Add a SB_I_NO_DATA_INTEGRITY superblock flag replacing the per-inode
AS_NO_DATA_INTEGRITY mapping flag so sync kicks off writeback but
doesn't wait for flusher threads. This fixes a suspend-to-RAM hang on
fuse-overlayfs where the flusher thread blocks when the fuse daemon
is frozen.
- Fix a lockdep splat in iomap when reads fail. iomap_read_end_io()
invokes fserror_report() which calls igrab() taking i_lock in hardirq
context while i_lock is normally held with interrupts enabled. Kick
failed read handling to a workqueue.
- Remove the redundant netfs_io_stream::front member and use
stream->subrequests.next instead, fixing a potential issue in the
direct write code path.
* tag 'vfs-7.0-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs: Fix the handling of stream->front by removing it
iomap: fix lockdep complaint when reads fail
writeback: don't block sync for filesystems with no data integrity guarantees
netfs: Fix read abandonment during retry
vfs: fix docstring of hash_name()
iomap: fix invalid folio access when i_blkbits differs from I/O granularity
selftests/mount_setattr: increase tmpfs size for idmapped mount tests
fs: clear I_DIRTY_TIME in sync_lazytime
netfs: Fix NULL pointer dereference in netfs_unbuffered_write() on retry
netfs: Fix kernel BUG in netfs_limit_iter() for ITER_KVEC iterators
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex fixes from Ingo Molnar:
- Tighten up the sys_futex_requeue() ABI a bit, to disallow dissimilar
futex flags and potential UaF access (Peter Zijlstra)
- Fix UaF between futex_key_to_node_opt() and vma_replace_policy()
(Hao-Yu Yang)
- Clear stale exiting pointer in futex_lock_pi() retry path, which
triggered a warning (and potential misbehavior) in stress-testing
(Davidlohr Bueso)
* tag 'locking-urgent-2026-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Clear stale exiting pointer in futex_lock_pi() retry path
futex: Fix UaF between futex_key_to_node_opt() and vma_replace_policy()
futex: Require sys_futex_requeue() to have identical flags
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linux
Jonathan writes:
IIO: 2nd set of fixes for the 7.0 cycle
Usual mixed bag of fixes for recent code and much older issues that have
surfaced. Biggest group are continued resolution of IRQF_ONE_SHOT
being used incorrectly (which now triggers a warning)
adi,ad4062
- Replace IRQF_ONESHOT (as no threaded handler) with IRQF_NO_THREAD as
the caller makes use of iio_trigger_poll() which cannot run from a
thread.
adi,ade9000
- Move mutex_init() earlier to ensure it is available if spurious IRQ
occurs.
adi,adis16550
- Fix swapped gyro and accel filter functions.
adi,adxl3380
- Fix some bit manipulation that was always resulting in 0.
- Fix incorrect register map for calibbias on the active power channel.
- Fix returning IRQF_HANDLED from a function that should return 0 or
-ERRNO.
aspeed,adc
- Clear a reference voltage bit that might be set prior to driver load.
bosch,bno055
- Off by one channel buffer sizing. Benine due to padding prior to the
subsequent timestamp.
hid-sensors
- A more complex fix to IRQF_ONESHOT warning as this driver had a trigger
that was never actually used but the ABI that exposed had to be
maintained to avoid regressions.
hid-sensors-rotation
- An obscure buffer alignment case that applies to quaternions only was
recently broken resulting in writes beyond the end of the channel buffer.
Add a new core macro and apply it in this driver to make it very clear
what was going on.
honeywell,abp2030pa
- Remove meaningless IRQF_ONESHOT from a non threaded IRQ handler.
Warning fix only.
invense,mpu3050
- Fix token passed to free_irq() to match the one used at setup.
- Fix an irq resource leak in error path.
- Reorder probe so that userspace interfaces are exposed only after
everything else has finished.
- Reorder remove slightly to cleanup the buffer only after irq removed
ensuring reverse of probe sequence.
microchip,mcp47feb02
- Fix use of mutex before it was initialized by not performing unnecessary
lock that was early enough in probe that all code was serial.
st,lsm6dsx
- Ensure that FIFO ODR is only controllable for accel and gyro channels
avoiding incorrect register accesses.
- Restrict separation of buffer sampling from main sampling rate to
accelerometer. It is only useful for running event detection faster
than the fifo and the only events are on the accelerometer.
ti,ads1018
- Fix overflow of u8 which wasn't big enough to store max data rate value.
ti,ads1119:
- Fix unbalanced pm in an error path.
- IRQF_ONESHOT (as no threaded handler) replaced with IRQF_NO_THREAD
(needed for iio_trigger_poll()).
- Ensure complete reinitialized before reuse. Previously it would have
completed immediate after the first time.
ti,ads7950
- Fix return value of gpio_get() to be 0 or 1.
- Avoid accidental overwrite of state resulting in gpio_get() only
returning 0 or -ERRNO but never 1.
* tag 'iio-fixes-for-7.0b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (25 commits)
iio: imu: adis16550: fix swapped gyro/accel filter functions
iio: adc: aspeed: clear reference voltage bits before configuring vref
iio: adc: ti-ads1119: Reinit completion before wait_for_completion_timeout()
iio: adc: ti-ads1018: fix type overflow for data rate
iio: adc: ti-ads7950: do not clobber gpio state in ti_ads7950_get()
iio: adc: ti-ads7950: normalize return value of gpio_get
iio: orientation: hid-sensor-rotation: fix quaternion alignment
iio: add IIO_DECLARE_QUATERNION() macro
iio: adc: ti-ads1119: Replace IRQF_ONESHOT with IRQF_NO_THREAD
iio: imu: bno055: fix BNO055_SCAN_CH_COUNT off by one
iio: hid-sensors: Use software trigger
iio: adc: ad4062: Replace IRQF_ONESHOT with IRQF_NO_THREAD
iio: gyro: mpu3050: Fix out-of-sequence free_irq()
iio: gyro: mpu3050: Move iio_device_register() to correct location
iio: gyro: mpu3050: Fix irq resource leak
iio: gyro: mpu3050: Fix incorrect free_irq() variable
iio: imu: st_lsm6dsx: Set buffer sampling frequency for accelerometer only
iio: imu: st_lsm6dsx: Set FIFO ODR for accelerometer and gyroscope only
iio: dac: mcp47feb02: Fix mutex used before initialization
iio: adc: ade9000: fix wrong return type in streaming push
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"10 hotfixes. 8 are cc:stable. 9 are for MM.
There's a 3-patch series of DAMON fixes from Josh Law and SeongJae
Park. The rest are singletons - please see the changelogs for details"
* tag 'mm-hotfixes-stable-2026-03-28-10-45' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/mseal: update VMA end correctly on merge
bug: avoid format attribute warning for clang as well
mm/pagewalk: fix race between concurrent split and refault
mm/memory: fix PMD/PUD checks in follow_pfnmap_start()
mm/damon/sysfs: check contexts->nr in repeat_call_fn
mm/damon/sysfs: check contexts->nr before accessing contexts_arr[0]
mm/damon/sysfs: fix param_ctx leak on damon_sysfs_new_test_ctx() failure
mm/swap: fix swap cache memcg accounting
MAINTAINERS, mailmap: update email address for Harry Yoo
mm/huge_memory: fix folio isn't locked in softleaf_to_folio()
|
|
On arm64 server, we found folio that get from migration entry isn't locked
in softleaf_to_folio(). This issue triggers when mTHP splitting and
zap_nonpresent_ptes() races, and the root cause is lack of memory barrier
in softleaf_to_folio(). The race is as follows:
CPU0 CPU1
deferred_split_scan() zap_nonpresent_ptes()
lock folio
split_folio()
unmap_folio()
change ptes to migration entries
__split_folio_to_order() softleaf_to_folio()
set flags(including PG_locked) for tail pages folio = pfn_folio(softleaf_to_pfn(entry))
smp_wmb() VM_WARN_ON_ONCE(!folio_test_locked(folio))
prep_compound_page() for tail pages
In __split_folio_to_order(), smp_wmb() guarantees page flags of tail pages
are visible before the tail page becomes non-compound. smp_wmb() should
be paired with smp_rmb() in softleaf_to_folio(), which is missed. As a
result, if zap_nonpresent_ptes() accesses migration entry that stores tail
pfn, softleaf_to_folio() may see the updated compound_head of tail page
before page->flags.
This issue will trigger VM_WARN_ON_ONCE() in pfn_swap_entry_folio()
because of the race between folio split and zap_nonpresent_ptes()
leading to a folio incorrectly undergoing modification without a folio
lock being held.
This is a BUG_ON() before commit 93976a20345b ("mm: eliminate further
swapops predicates"), which in merged in v6.19-rc1.
To fix it, add missing smp_rmb() if the softleaf entry is migration entry
in softleaf_to_folio() and softleaf_to_page().
[tujinjiang@huawei.com: update function name and comments]
Link: https://lkml.kernel.org/r/20260321075214.3305564-1-tujinjiang@huawei.com
Link: https://lkml.kernel.org/r/20260319012541.4158561-1-tujinjiang@huawei.com
Fixes: e9b61f19858a ("thp: reintroduce split_huge_page()")
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Barry Song <baohua@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"There are two core fixes here. One is from Johan dealing with an issue
introduced by a devm_ API usage update causing things to be freed
earlier than they had earlier when we fail to register a device,
another from Danilo avoids unlocked acccess to data by converting to
use a driver core API.
We also have a few relatively minor driver specific fixes"
* tag 'spi-fix-v7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-fsl-lpspi: fix teardown order issue (UAF)
spi: fix use-after-free on managed registration failure
spi: use generic driver_override infrastructure
spi: meson-spicc: Fix double-put in remove path
spi: sn-f-ospi: Use devm_mutex_init() to simplify code
spi: sn-f-ospi: Fix resource leak in f_ospi_probe()
|
|
Some filesystems need to treat some folios specially (for example for
inodes with inline data). Doing the handling in their .writepages method
in a race-free manner results in duplicating some of the writeback
internals. So provide generalized version of mpage_writepages() that
allows filesystem to provide a handler called for each folio which can
handle the folio in a special way.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://patch.msgid.link/20260326140635.15895-3-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
An empty gather is coded with start=U64_MAX, end=0 and several drivers go
on to convert that to a size with:
end - start + 1
Which gives 2 for an empty gather. This then causes Weird Stuff to
happen (for example an UBSAN splat in VT-d) that is hopefully harmless,
but maybe not.
Prevent drivers from being called right in iommu_iotlb_sync().
Auditing shows that AMD, Intel, Mediatek and RSIC-V drivers all do things
on these empty gathers.
Further, there are several callers that can trigger empty gathers,
especially in unusual conditions. For example iommu_map_nosync() will call
a 0 size unmap on some error paths. Also in VFIO, iommupt and other
places.
Cc: stable@vger.kernel.org
Reported-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Closes: https://lore.kernel.org/r/11145826.aFP6jjVeTY@jkrzyszt-mobl2.ger.corp.intel.com
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
|
|
__skb_ext_put() is not declared if SKB_EXTENSIONS is not enabled, which
causes a build error:
drivers/net/netdevsim/netdev.c: In function 'nsim_forward_skb':
drivers/net/netdevsim/netdev.c:114:25: error: implicit declaration of function '__skb_ext_put'; did you mean 'skb_ext_put'? [-Werror=implicit-function-declaration]
114 | __skb_ext_put(psp_ext);
| ^~~~~~~~~~~~~
| skb_ext_put
cc1: some warnings being treated as errors
Add a stub to fix the build.
Fixes: 7d9351435ebb ("netdevsim: drop PSP ext ref on forward failure")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://patch.msgid.link/20260324140857.783-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
