| Age | Commit message (Collapse) | Author |
|---|
|
commit 74d016ecc1a7974664e98d1afbf649cd4e0e0423 upstream.
Equivalent of kern_path_locked() taking dfd/userland name.
User introduced in the next commit.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1e560864159d002b453da42bd2c13a1805515a20 upstream.
A last minute revert in 6.7-final introduced a potential deadlock when
enabling ASPM during probe of Qualcomm PCIe controllers as reported by
lockdep:
============================================
WARNING: possible recursive locking detected
6.7.0 #40 Not tainted
--------------------------------------------
kworker/u16:5/90 is trying to acquire lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc
but task is already holding lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(pci_bus_sem);
lock(pci_bus_sem);
*** DEADLOCK ***
Call trace:
print_deadlock_bug+0x25c/0x348
__lock_acquire+0x10a4/0x2064
lock_acquire+0x1e8/0x318
down_read+0x60/0x184
pcie_aspm_pm_state_change+0x58/0xdc
pci_set_full_power_state+0xa8/0x114
pci_set_power_state+0xc4/0x120
qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom]
pci_walk_bus+0x64/0xbc
qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom]
The deadlock can easily be reproduced on machines like the Lenovo ThinkPad
X13s by adding a delay to increase the race window during asynchronous
probe where another thread can take a write lock.
Add a new pci_set_power_state_locked() and associated helper functions that
can be called with the PCI bus semaphore held to avoid taking the read lock
twice.
Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com
Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org
Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: <stable@vger.kernel.org> # 6.7
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dad6a09f3148257ac1773cd90934d721d68ab595 upstream.
The hrtimers migration on CPU-down hotplug process has been moved
earlier, before the CPU actually goes to die. This leaves a small window
of opportunity to queue an hrtimer in a blind spot, leaving it ignored.
For example a practical case has been reported with RCU waking up a
SCHED_FIFO task right before the CPUHP_AP_IDLE_DEAD stage, queuing that
way a sched/rt timer to the local offline CPU.
Make sure such situations never go unnoticed and warn when that happens.
Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240129235646.3171983-4-boqun.feng@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8e46a2d068c92a905d01cbb018b00d66991585ab ]
A short read may occur while reading the message footer from the
socket. Later, when the socket is ready for another read, the
messenger invokes all read_partial_*() handlers, including
read_partial_sparse_msg_data(). The expectation is that
read_partial_sparse_msg_data() would bail, allowing the messenger to
invoke read_partial() for the footer and pick up where it left off.
However read_partial_sparse_msg_data() violates that and ends up
calling into the state machine in the OSD client. The sparse-read
state machine assumes that it's a new op and interprets some piece of
the footer as the sparse-read header and returns bogus extents/data
length, etc.
To determine whether read_partial_sparse_msg_data() should bail, let's
reuse cursor->total_resid. Because once it reaches to zero that means
all the extents and data have been successfully received in last read,
else it could break out when partially reading any of the extents and
data. And then osd_sparse_read() could continue where it left off.
[ idryomov: changelog ]
Link: https://tracker.ceph.com/issues/63586
Fixes: d396f89db39a ("libceph: add sparse read support to msgr1")
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a22fe1d6dec7e98535b97249fdc95c2be79120bb ]
is_slave_direction() should return true when direction is DMA_DEV_TO_DEV.
Fixes: 49920bc66984 ("dmaengine: add new enum dma_transfer_direction")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240123172842.3764529-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f6564fce256a3944aa1bc76cb3c40e792d97c1eb upstream.
Alexander Potapenko writes in [1]: "For every memory access in the code
instrumented by KMSAN we call kmsan_get_metadata() to obtain the metadata
for the memory being accessed. For virtual memory the metadata pointers
are stored in the corresponding `struct page`, therefore we need to call
virt_to_page() to get them.
According to the comment in arch/x86/include/asm/page.h,
virt_to_page(kaddr) returns a valid pointer iff virt_addr_valid(kaddr) is
true, so KMSAN needs to call virt_addr_valid() as well.
To avoid recursion, kmsan_get_metadata() must not call instrumented code,
therefore ./arch/x86/include/asm/kmsan.h forks parts of
arch/x86/mm/physaddr.c to check whether a virtual address is valid or not.
But the introduction of rcu_read_lock() to pfn_valid() added instrumented
RCU API calls to virt_to_page_or_null(), which is called by
kmsan_get_metadata(), so there is an infinite recursion now. I do not
think it is correct to stop that recursion by doing
kmsan_enter_runtime()/kmsan_exit_runtime() in kmsan_get_metadata(): that
would prevent instrumented functions called from within the runtime from
tracking the shadow values, which might introduce false positives."
Fix the issue by switching pfn_valid() to the _sched() variant of
rcu_read_lock/unlock(), which does not require calling into RCU. Given
the critical section in pfn_valid() is very small, this is a reasonable
trade-off (with preemptible RCU).
KMSAN further needs to be careful to suppress calls into the scheduler,
which would be another source of recursion. This can be done by wrapping
the call to pfn_valid() into preempt_disable/enable_no_resched(). The
downside is that this sacrifices breaking scheduling guarantees; however,
a kernel compiled with KMSAN has already given up any performance
guarantees due to being heavily instrumented.
Note, KMSAN code already disables tracing via Makefile, and since mmzone.h
is included, it is not necessary to use the notrace variant, which is
generally preferred in all other cases.
Link: https://lkml.kernel.org/r/20240115184430.2710652-1-glider@google.com [1]
Link: https://lkml.kernel.org/r/20240118110022.2538350-1-elver@google.com
Fixes: 5ec8e8ea8b77 ("mm/sparsemem: fix race in accessing memory_section->usage")
Signed-off-by: Marco Elver <elver@google.com>
Reported-by: Alexander Potapenko <glider@google.com>
Reported-by: syzbot+93a9e8a3dea8d6085e12@syzkaller.appspotmail.com
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5ec42bf04d72fd6d0a6855810cc779e0ee31dfd7 ]
The PCI ID insertion follows the increasing order in the table, but
this hardware follows MTL (MeteorLake).
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20231204212710.185976-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3314f2097dee43defc20554f961a8b17f4787e2d ]
This series is introducing the use of FIELD_GET and FIELD_PREP which
requires bitfield.h to be included. Fix all the includes in this one
change, and rearrange includes into alphabetical order to ease
readability and future maintenance.
virtchnl.h and it's usage was modified to have it's own includes as it
should. This required including bits.h for virtchnl.h.
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 852486b35f344887786d63250946dd921a05d7e8 ]
As per the earlier patches, BPF sub-programs have bpf_callback_t
signature and CFI expects callers to have matching signature. This is
violated by bpf_prog_aux::bpf_exception_cb().
[peterz: Changelog]
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/CAADnVQ+Z7UcXXBBhMubhcMM=R-dExk-uHtfOLtoLxQ1XxEpqEA@mail.gmail.com
Link: https://lore.kernel.org/r/20231215092707.910319166@infradead.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 64bac5ea17d527872121adddfee869c7a0618f8f ]
The prototype was hidden in an #ifdef on x86, which causes a warning:
kernel/irq_work.c:72:13: error: no previous prototype for 'arch_irq_work_raise' [-Werror=missing-prototypes]
Some architectures have a working prototype, while others don't.
Fix this by providing it in only one place that is always visible.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4e814173a8c4f432fd068b1c796f0416328c9d99 ]
There are 3 synchronization issues with thermal zone suspend-resume
during system-wide transitions:
1. The resume code runs in a PM notifier which is invoked after user
space has been thawed, so it can run concurrently with user space
which can trigger a thermal zone device removal. If that happens,
the thermal zone resume code may use a stale pointer to the next
list element and crash, because it does not hold thermal_list_lock
while walking thermal_tz_list.
2. The thermal zone resume code calls thermal_zone_device_init()
outside the zone lock, so user space or an update triggered by
the platform firmware may see an inconsistent state of a
thermal zone leading to unexpected behavior.
3. Clearing the in_suspend global variable in thermal_pm_notify()
allows __thermal_zone_device_update() to continue for all thermal
zones and it may as well run before the thermal_tz_list walk (or
at any point during the list walk for that matter) and attempt to
operate on a thermal zone that has not been resumed yet. It may
also race destructively with thermal_zone_device_init().
To address these issues, add thermal_list_lock locking to
thermal_pm_notify(), especially arount the thermal_tz_list,
make it call thermal_zone_device_init() back-to-back with
__thermal_zone_device_update() under the zone lock and replace
in_suspend with per-zone bool "suspend" indicators set and unset
under the given zone's lock.
Link: https://lore.kernel.org/linux-pm/20231218162348.69101-1-bo.ye@mediatek.com/
Reported-by: Bo Ye <bo.ye@mediatek.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ba367479c7ad0b870461024cd5ae7a1ea6e1e3db ]
By mistake, dev_pm_opp_find_level_floor() used the level parameter as
unsigned long instead of unsigned int. Fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 84db47ca7146d7bd00eb5cf2b93989a971c84650 ]
Since commit fc137c0ddab2 ("sched/numa: enhance vma scanning logic")
NUMA Balancing allows updating PTEs to trap NUMA hinting faults if the
task had previously accessed VMA. However unconditional scan of VMAs are
allowed during initial phase of VMA creation until process's
mm numa_scan_seq reaches 2 even though current task had not accessed VMA.
Rationale:
- Without initial scan subsequent PTE update may never happen.
- Give fair opportunity to all the VMAs to be scanned and subsequently
understand the access pattern of all the VMAs.
But it has a corner case where, if a VMA is created after some time,
process's mm numa_scan_seq could be already greater than 2.
For e.g., values of mm numa_scan_seq when VMAs are created by running
mmtest autonuma benchmark briefly looks like:
start_seq=0 : 459
start_seq=2 : 138
start_seq=3 : 144
start_seq=4 : 8
start_seq=8 : 1
start_seq=9 : 1
This results in no unconditional PTE updates for those VMAs created after
some time.
Fix:
- Note down the initial value of mm numa_scan_seq in per VMA start_seq.
- Allow unconditional scan till start_seq + 2.
Result:
SUT: AMD EPYC Milan with 2 NUMA nodes 256 cpus.
base kernel: upstream 6.6-rc6 with Mels patches [1] applied.
kernbench
========== base patched %gain
Amean elsp-128 165.09 ( 0.00%) 164.78 * 0.19%*
Duration User 41404.28 41375.08
Duration System 9862.22 9768.48
Duration Elapsed 519.87 518.72
Ops NUMA PTE updates 1041416.00 831536.00
Ops NUMA hint faults 263296.00 220966.00
Ops NUMA pages migrated 258021.00 212769.00
Ops AutoNUMA cost 1328.67 1114.69
autonumabench
NUMA01_THREADLOCAL
==================
Amean elsp-NUMA01_THREADLOCAL 81.79 (0.00%) 67.74 * 17.18%*
Duration User 54832.73 47379.67
Duration System 75.00 185.75
Duration Elapsed 576.72 476.09
Ops NUMA PTE updates 394429.00 11121044.00
Ops NUMA hint faults 1001.00 8906404.00
Ops NUMA pages migrated 288.00 2998694.00
Ops AutoNUMA cost 7.77 44666.84
Signed-off-by: Raghavendra K T <raghavendra.kt@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Link: https://lore.kernel.org/r/2ea7cbce80ac7c62e90cbfb9653a7972f902439f.1697816692.git.raghavendra.kt@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 56062d60f117dccfb5281869e0ab61e090baf864 upstream.
Presently ia32 registers stored in ptregs are unconditionally cast to
unsigned int by the ia32 stub. They are then cast to long when passed to
__se_sys*, but will not be sign extended.
This takes the sign of the syscall argument into account in the ia32
stub. It still casts to unsigned int to avoid implementation specific
behavior. However then casts to int or unsigned int as necessary. So that
the following cast to long sign extends the value.
This fixes the io_pgetevents02 LTP test when compiled with -m32. Presently
the systemcall io_pgetevents_time64() unexpectedly accepts -1 for the
maximum number of events.
It doesn't appear other systemcalls with signed arguments are effected
because they all have compat variants defined and wired up.
Fixes: ebeb8c82ffaf ("syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com>
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240110130122.3836513-1-nik.borisov@suse.com
Link: https://lore.kernel.org/ltp/20210921130127.24131-1-rpalethorpe@suse.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ec7cc38ef9f83553102e84c82536971a81630739 ]
To enable multicast packets which are offloaded in bridge multicast
offload mode to be sent also to uplink, FTE bit uplink_hairpin_en should
be set. Add this bit to FTE for the bridge multicast offload rules.
Fixes: 18c2916cee12 ("net/mlx5: Bridge, snoop igmp/mld packets")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a54d51fb2dfb846aedf3751af501e9688db447f5 ]
Generic sk_busy_loop_end() only looks at sk->sk_receive_queue
for presence of packets.
Problem is that for UDP sockets after blamed commit, some packets
could be present in another queue: udp_sk(sk)->reader_queue
In some cases, a busy poller could spin until timeout expiration,
even if some packets are available in udp_sk(sk)->reader_queue.
v3: - make sk_busy_loop_end() nicer (Willem)
v2: - add a READ_ONCE(sk->sk_family) in sk_is_inet() to avoid KCSAN splats.
- add a sk_is_inet() check in sk_is_udp() (Willem feedback)
- add a sk_is_inet() check in sk_is_tcp().
Fixes: 2276f58ac589 ("udp: use a separate rx queue for packet reception")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 5ec8e8ea8b7783fab150cf86404fc38cb4db8800 upstream.
The below race is observed on a PFN which falls into the device memory
region with the system memory configuration where PFN's are such that
[ZONE_NORMAL ZONE_DEVICE ZONE_NORMAL]. Since normal zone start and end
pfn contains the device memory PFN's as well, the compaction triggered
will try on the device memory PFN's too though they end up in NOP(because
pfn_to_online_page() returns NULL for ZONE_DEVICE memory sections). When
from other core, the section mappings are being removed for the
ZONE_DEVICE region, that the PFN in question belongs to, on which
compaction is currently being operated is resulting into the kernel crash
with CONFIG_SPASEMEM_VMEMAP enabled. The crash logs can be seen at [1].
compact_zone() memunmap_pages
------------- ---------------
__pageblock_pfn_to_page
......
(a)pfn_valid():
valid_section()//return true
(b)__remove_pages()->
sparse_remove_section()->
section_deactivate():
[Free the array ms->usage and set
ms->usage = NULL]
pfn_section_valid()
[Access ms->usage which
is NULL]
NOTE: From the above it can be said that the race is reduced to between
the pfn_valid()/pfn_section_valid() and the section deactivate with
SPASEMEM_VMEMAP enabled.
The commit b943f045a9af("mm/sparse: fix kernel crash with
pfn_section_valid check") tried to address the same problem by clearing
the SECTION_HAS_MEM_MAP with the expectation of valid_section() returns
false thus ms->usage is not accessed.
Fix this issue by the below steps:
a) Clear SECTION_HAS_MEM_MAP before freeing the ->usage.
b) RCU protected read side critical section will either return NULL
when SECTION_HAS_MEM_MAP is cleared or can successfully access ->usage.
c) Free the ->usage with kfree_rcu() and set ms->usage = NULL. No
attempt will be made to access ->usage after this as the
SECTION_HAS_MEM_MAP is cleared thus valid_section() return false.
Thanks to David/Pavan for their inputs on this patch.
[1] https://lore.kernel.org/linux-mm/994410bb-89aa-d987-1f50-f514903c55aa@quicinc.com/
On Snapdragon SoC, with the mentioned memory configuration of PFN's as
[ZONE_NORMAL ZONE_DEVICE ZONE_NORMAL], we are able to see bunch of
issues daily while testing on a device farm.
For this particular issue below is the log. Though the below log is
not directly pointing to the pfn_section_valid(){ ms->usage;}, when we
loaded this dump on T32 lauterbach tool, it is pointing.
[ 540.578056] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
[ 540.578068] Mem abort info:
[ 540.578070] ESR = 0x0000000096000005
[ 540.578073] EC = 0x25: DABT (current EL), IL = 32 bits
[ 540.578077] SET = 0, FnV = 0
[ 540.578080] EA = 0, S1PTW = 0
[ 540.578082] FSC = 0x05: level 1 translation fault
[ 540.578085] Data abort info:
[ 540.578086] ISV = 0, ISS = 0x00000005
[ 540.578088] CM = 0, WnR = 0
[ 540.579431] pstate: 82400005 (Nzcv daif +PAN -UAO +TCO -DIT -SSBSBTYPE=--)
[ 540.579436] pc : __pageblock_pfn_to_page+0x6c/0x14c
[ 540.579454] lr : compact_zone+0x994/0x1058
[ 540.579460] sp : ffffffc03579b510
[ 540.579463] x29: ffffffc03579b510 x28: 0000000000235800 x27:000000000000000c
[ 540.579470] x26: 0000000000235c00 x25: 0000000000000068 x24:ffffffc03579b640
[ 540.579477] x23: 0000000000000001 x22: ffffffc03579b660 x21:0000000000000000
[ 540.579483] x20: 0000000000235bff x19: ffffffdebf7e3940 x18:ffffffdebf66d140
[ 540.579489] x17: 00000000739ba063 x16: 00000000739ba063 x15:00000000009f4bff
[ 540.579495] x14: 0000008000000000 x13: 0000000000000000 x12:0000000000000001
[ 540.579501] x11: 0000000000000000 x10: 0000000000000000 x9 :ffffff897d2cd440
[ 540.579507] x8 : 0000000000000000 x7 : 0000000000000000 x6 :ffffffc03579b5b4
[ 540.579512] x5 : 0000000000027f25 x4 : ffffffc03579b5b8 x3 :0000000000000001
[ 540.579518] x2 : ffffffdebf7e3940 x1 : 0000000000235c00 x0 :0000000000235800
[ 540.579524] Call trace:
[ 540.579527] __pageblock_pfn_to_page+0x6c/0x14c
[ 540.579533] compact_zone+0x994/0x1058
[ 540.579536] try_to_compact_pages+0x128/0x378
[ 540.579540] __alloc_pages_direct_compact+0x80/0x2b0
[ 540.579544] __alloc_pages_slowpath+0x5c0/0xe10
[ 540.579547] __alloc_pages+0x250/0x2d0
[ 540.579550] __iommu_dma_alloc_noncontiguous+0x13c/0x3fc
[ 540.579561] iommu_dma_alloc+0xa0/0x320
[ 540.579565] dma_alloc_attrs+0xd4/0x108
[quic_charante@quicinc.com: use kfree_rcu() in place of synchronize_rcu(), per David]
Link: https://lkml.kernel.org/r/1698403778-20938-1-git-send-email-quic_charante@quicinc.com
Link: https://lkml.kernel.org/r/1697202267-23600-1-git-send-email-quic_charante@quicinc.com
Fixes: f46edbd1b151 ("mm/sparsemem: add helpers track active portions of a section at boot")
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f67f8d4a8c1e1ebc85a6cbdb9a7266f14863461c upstream.
Running my yearly branch profiler to see where likely/unlikely annotation
may be added or removed, I discovered this:
correct incorrect % Function File Line
------- --------- - -------- ---- ----
0 457918 100 page_try_dup_anon_rmap rmap.h 264
[..]
458021 0 0 page_try_dup_anon_rmap rmap.h 265
I thought it was interesting that line 264 of rmap.h had a 100% incorrect
annotation, but the line directly below it was 100% correct. Looking at the
code:
if (likely(!is_device_private_page(page) &&
unlikely(page_needs_cow_for_dma(vma, page))))
It didn't make sense. The "likely()" was around the entire if statement
(not just the "!is_device_private_page(page)"), which also included the
"unlikely()" portion of that if condition.
If the unlikely portion is unlikely to be true, that would make the entire
if condition unlikely to be true, so it made no sense at all to say the
entire if condition is true.
What is more likely to be likely is just the first part of the if statement
before the && operation. It's likely to be a misplaced parenthesis. And
after making the if condition broken into a likely() && unlikely(), both
now appear to be correct!
Link: https://lkml.kernel.org/r/20231201145936.5ddfdb50@gandalf.local.home
Fixes:fb3d824d1a46c ("mm/rmap: split page_dup_rmap() into page_dup_file_rmap() and page_try_dup_anon_rmap()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 120931db07b49252aba2073096b595482d71857c upstream.
The UIP timeout is hardcoded to 10ms for all RTC reads, but in some
contexts this might not be enough time. Add a timeout parameter to
mc146818_get_time() and mc146818_get_time_callback().
If UIP timeout is configured by caller to be >=100 ms and a call
takes this long, log a warning.
Make all callers use 10ms to ensure no functional changes.
Cc: <stable@vger.kernel.org> # 6.1.y
Fixes: ec5895c0f2d8 ("rtc: mc146818-lib: extract mc146818_avoid_UIP")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Acked-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Link: https://lore.kernel.org/r/20231128053653.101798-4-mario.limonciello@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f1bb47a31dff6d4b34fb14e99850860ee74bb003 upstream.
Some ioctl commands do not require ioctl permission, but are routed to
other permissions such as FILE_GETATTR or FILE_SETATTR. This routing is
done by comparing the ioctl cmd to a set of 64-bit flags (FS_IOC_*).
However, if a 32-bit process is running on a 64-bit kernel, it emits
32-bit flags (FS_IOC32_*) for certain ioctl operations. These flags are
being checked erroneously, which leads to these ioctl operations being
routed to the ioctl permission, rather than the correct file
permissions.
This was also noted in a RED-PEN finding from a while back -
"/* RED-PEN how should LSM module know it's handling 32bit? */".
This patch introduces a new hook, security_file_ioctl_compat(), that is
called from the compat ioctl syscall. All current LSMs have been changed
to support this hook.
Reviewing the three places where we are currently using
security_file_ioctl(), it appears that only SELinux needs a dedicated
compat change; TOMOYO and SMACK appear to be functional without any
change.
Cc: stable@vger.kernel.org
Fixes: 0b24dcb7f2f7 ("Revert "selinux: simplify ioctl checking"")
Signed-off-by: Alfred Piccioni <alpic@google.com>
Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com>
[PM: subject tweak, line length fixes, and alignment corrections]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7a8e9cdf9405819105ae7405cd91e482bf574b01 upstream.
Using the address operator on the array doesn't work:
./include/linux/seq_buf.h:27:27: error: initialization of ‘char *’
from incompatible pointer type ‘char (*)[128]’
[-Werror=incompatible-pointer-types]
27 | .buffer = &__ ## NAME ## _buffer, \
| ^
Apart from fixing that, we can improve DECLARE_SEQ_BUF() by using a
compound literal to define the buffer array without attaching a name
to it. This makes the macro a single statement, allowing constructs
such as:
static DECLARE_SEQ_BUF(my_seq_buf, MYSB_SIZE);
to work as intended.
Link: https://lkml.kernel.org/r/20240116-declare-seq-buf-fix-v1-1-915db4692f32@linux.ibm.com
Cc: stable@vger.kernel.org
Acked-by: Kees Cook <keescook@chromium.org>
Fixes: dcc4e5728eea ("seq_buf: Introduce DECLARE_SEQ_BUF and seq_buf_str()")
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bbcd80f53a5e8c27c2511f539fec8c373f500cf4 upstream.
The ONFI specification states that devices do not need to support
sequential reads across LUN boundaries. In order to prevent such event
from happening and possibly failing, let's introduce the concept of
"pause" in the sequential read to handle these cases. The first/last
pages remain the same but any time we cross a LUN boundary we will end
and restart (if relevant) the sequential read operation.
Cc: stable@vger.kernel.org
Fixes: 003fe4b9545b ("mtd: rawnand: Support for sequential cache reads")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Martin Hundebøll <martin@geanix.com>
Link: https://lore.kernel.org/linux-mtd/20231215123208.516590-2-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7d4b5d7a37bdd63a5a3371b988744b060d5bb86f upstream.
In preparation for subsequent changes, introduce a specialized variant
of async_schedule_dev() that will not invoke the argument function
synchronously when it cannot be scheduled for asynchronous execution.
The new function, async_schedule_dev_nocall(), will be used for fixing
possible deadlocks in the system-wide power management core code.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> for the series.
Tested-by: Youngmin Nam <youngmin.nam@samsung.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6543ac13c623f906200dfd3f1c407d8d333b6995 ]
The existing SoundWire support misses a clear Controller/Manager
hiearchical definition to deal with all variants across SOC vendors.
a) Intel platforms have one controller with 4 or more Managers.
b) AMD platforms have two controllers with one Manager each, but due
to BIOS issues use two different link_id values within the scope of a
single controller.
c) QCOM platforms have one or more controller with one Manager each.
This patch adds a 'controller_id' which can be set by higher
levels. If assigned to -1, the controller_id will be set to the
system-unique IDA-assigned bus->id.
The main change is that the bus->id is no longer used for any device
name, which makes the definition completely predictable and not
dependent on any enumeration order. The bus->id is only used to insert
the Managers in the stream rt context.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/stable/20231017160933.12624-2-pierre-louis.bossart%40linux.intel.com
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20231017160933.12624-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 8a8a9ac8a497 ("soundwire: fix initializing sysfs for same devices on different buses")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9874808878d9eed407e3977fd11fee49de1e1d86 ]
An skb can be added to a neigh->arp_queue while waiting for an arp
reply. Where original skb's skb->dev can be different to neigh's
neigh->dev. For instance in case of bridging dnated skb from one veth to
another, the skb would be added to a neigh->arp_queue of the bridge.
As skb->dev can be reset back to nf_bridge->physindev and used, and as
there is no explicit mechanism that prevents this physindev from been
freed under us (for instance neigh_flush_dev doesn't cleanup skbs from
different device's neigh queue) we can crash on e.g. this stack:
arp_process
neigh_update
skb = __skb_dequeue(&neigh->arp_queue)
neigh_resolve_output(..., skb)
...
br_nf_dev_xmit
br_nf_pre_routing_finish_bridge_slow
skb->dev = nf_bridge->physindev
br_handle_frame_finish
Let's use plain ifindex instead of net_device link. To peek into the
original net_device we will use dev_get_by_index_rcu(). Thus either we
get device and are safe to use it or we don't get it and drop skb.
Fixes: c4e70a87d975 ("netfilter: bridge: rename br_netfilter.c to br_netfilter_hooks.c")
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a54e72197037d2c9bfcd70dddaac8c8ccb5b41ba ]
This is a preparation patch for replacing physindev with physinif on
nf_bridge_info structure. We will use dev_get_by_index_rcu to resolve
device, when needed, and it requires net to be available.
Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Stable-dep-of: 9874808878d9 ("netfilter: bridge: replace physindev with physinif in nf_bridge_info")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 832b371097eb928d077c827b8f117bf5b99d35c0 ]
Commit 9e4555d1e54a ("gpiolib: add support for scope-based management to
gpio_device") sought to add scope-based gpio_device refcounting, but
erroneously forgot a negation of IS_ERR_OR_NULL().
As a result, gpio_device_put() is not called if the gpio_device pointer
is valid (meaning the ref is leaked), but only called if the pointer is
NULL or an ERR_PTR().
While at it drop a superfluous trailing semicolon.
Fixes: 9e4555d1e54a ("gpiolib: add support for scope-based management to gpio_device")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9181d6f8a2bb32d158de66a84164fac05e3ddd18 ]
syzbot/KMSAN reports access to uninitialized data from gso_features_check() [1]
The repro use af_packet, injecting a gso packet and hdrlen == 0.
We could fix the issue making gso_features_check() more careful
while dealing with NETIF_F_TSO_MANGLEID in fast path.
Or we can make sure virtio_net_hdr_to_skb() pulls minimal network and
transport headers as intended.
Note that for GSO packets coming from untrusted sources, SKB_GSO_DODGY
bit forces a proper header validation (and pull) before the packet can
hit any device ndo_start_xmit(), thus we do not need a precise disection
at virtio_net_hdr_to_skb() stage.
[1]
BUG: KMSAN: uninit-value in skb_gso_segment include/net/gso.h:83 [inline]
BUG: KMSAN: uninit-value in validate_xmit_skb+0x10f2/0x1930 net/core/dev.c:3629
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x10f2/0x1930 net/core/dev.c:3629
__dev_queue_xmit+0x1eac/0x5130 net/core/dev.c:4341
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x8b1d/0x9f30 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2674
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Uninit was created at:
slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768
slab_alloc_node mm/slub.c:3478 [inline]
kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560
__alloc_skb+0x318/0x740 net/core/skbuff.c:651
alloc_skb include/linux/skbuff.h:1286 [inline]
alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334
sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2780
packet_alloc_skb net/packet/af_packet.c:2936 [inline]
packet_snd net/packet/af_packet.c:3030 [inline]
packet_sendmsg+0x70e8/0x9f30 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
__sys_sendmsg net/socket.c:2667 [inline]
__do_sys_sendmsg net/socket.c:2676 [inline]
__se_sys_sendmsg net/socket.c:2674 [inline]
__x64_sys_sendmsg+0x307/0x490 net/socket.c:2674
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
CPU: 0 PID: 5025 Comm: syz-executor279 Not tainted 6.7.0-rc7-syzkaller-00003-gfbafc3e621c3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023
Reported-by: syzbot+7f4d0ea3df4d4fa9a65f@syzkaller.appspotmail.com
Link: https://lore.kernel.org/netdev/0000000000005abd7b060eb160cd@google.com/
Fixes: 9274124f023b ("net: stricter validation of untrusted gso packets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b08ded2ef2e98768d5ee5f71da8fe768b1f7774b ]
In the preparation of DMA async support, let's pass the parameters to
read_from_host() and write_to_host() APIs using mhi_ep_buf_info structure.
No functional change.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Stable-dep-of: 327ec5f70609 ("PCI: epf-mhi: Fix the DMA data direction of dma_unmap_single()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 62210a26cd4f8ad52683a71c0226dfe85de1144d ]
Use slab allocator for allocating the memory for objects used frequently
and are of fixed size. This reduces the overheard associated with
kmalloc().
Suggested-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20231018122812.47261-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Stable-dep-of: 327ec5f70609 ("PCI: epf-mhi: Fix the DMA data direction of dma_unmap_single()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b73f08bb7fe5a0901646ca5ceaa1e7a2d5ee6293 ]
When reading in_voltage_scale we can get something like:
root@analog:/sys/bus/iio/devices/iio:device2# cat in_voltage_scale
0.038146
However, when reading the available options:
root@analog:/sys/bus/iio/devices/iio:device2# cat
in_voltage_scale_available
2000.000000 2100.000006 2200.000007 2300.000008 2400.000009 2500.000010
which does not make sense. Moreover, when trying to set a new scale we
get an error because there's no call to __ad9467_get_scale() to give us
values as given when reading in_voltage_scale. Fix it by computing the
available scales during probe and properly pass the list when
.read_available() is called.
While at it, change to use .read_available() from iio_info. Also note
that to properly fix this, adi-axi-adc.c has to be changed accordingly.
Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-4-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3171e46d677a668eed3086da78671f1e4f5b8405 ]
Coverity complains that pointer in the pci_dev_for_each_resource() may be
wrong, i.e., might be used for the out-of-bounds read.
There is no actual issue right now because we have another check afterwards
and the out-of-bounds read is not being performed. In any case it's better
code with this fixed, hence the proposed change.
As Jonas pointed out "It probably makes the code slightly less performant
as res will now be checked for being not NULL (which will always be true),
but I doubt it will be significant (or in any hot paths)."
Fixes: 09cc90063240 ("PCI: Introduce pci_dev_for_each_resource()")
Reported-by: Bjorn Helgaas <bhelgaas@google.com>
Closes: https://lore.kernel.org/r/20230509182122.GA1259567@bhelgaas
Suggested-by: Jonas Gorski <jonas.gorski@gmail.com>
Link: https://lore.kernel.org/r/20231030114218.2752236-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3c6b0c1c28184038d90dffe8eb542bedcb8ccf98 ]
It is claimed that srcu_read_lock_nmisafe() NMI-safe. However it
triggers a lockdep if used from NMI because lockdep expects a deadlock
since nothing disables NMIs while the lock is acquired.
This is because commit f0f44752f5f61 ("rcu: Annotate SRCU's update-side
lockdep dependencies") annotates synchronize_srcu() as a write lock
usage. This helps to detect a deadlocks such as
srcu_read_lock();
synchronize_srcu();
srcu_read_unlock();
The side effect is that the lock srcu_struct now has a USED usage in normal
contexts, so it conflicts with a USED_READ usage in NMI. But this shouldn't
cause a real deadlock because the write lock usage from synchronize_srcu()
is a fake one and only used for read/write deadlock detection.
Use a try-lock annotation for srcu_read_lock_nmisafe() to avoid lockdep
complains if used from NMI.
Fixes: f0f44752f5f6 ("rcu: Annotate SRCU's update-side lockdep dependencies")
Link: https://lore.kernel.org/r/20230927160231.XRCDDSK4@linutronix.de
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4e58aaeebb3c27993c734c99eae6881b196b1ddb ]
Although the RCU CPU stall notifiers can be useful for dumping state when
tracking down delicate forward-progress bugs where NUMA effects cause
cache lines to be delivered to a given CPU regularly, but always in a
state that prevents that CPU from making forward progress. These bugs can
be detected by the RCU CPU stall-warning mechanism, but in some cases,
the stall-warnings printk()s disrupt the forward-progress bug before
any useful state can be obtained.
Unfortunately, the notifier mechanism added by commit 5b404fdabacf ("rcu:
Add RCU CPU stall notifier") can make matters worse if used at all
carelessly. For example, if the stall warning was caused by a lock not
being released, then any attempt to acquire that lock in the notifier
will hang. This will prevent not only the notifier from producing any
useful output, but it will also prevent the stall-warning message from
ever appearing.
This commit therefore hides this new RCU CPU stall notifier
mechanism under a new RCU_CPU_STALL_NOTIFIER Kconfig option that
depends on both DEBUG_KERNEL and RCU_EXPERT. In addition, the
rcupdate.rcu_cpu_stall_notifiers=1 kernel boot parameter must also
be specified. The RCU_CPU_STALL_NOTIFIER Kconfig option's help text
contains a warning and explains the dangers of careless use, recommending
lockless notifier code. In addition, a WARN() is triggered each time
that an attempt is made to register a stall-warning notifier in kernels
built with CONFIG_RCU_CPU_STALL_NOTIFIER=y.
This combination of measures will keep use of this mechanism confined to
debug kernels and away from routine deployments.
[ paulmck: Apply Dan Carpenter feedback. ]
Fixes: 5b404fdabacf ("rcu: Add RCU CPU stall notifier")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.iitr10@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 7bed6f3d08b7af27b7015da8dc3acf2b9c1f21d7 upstream.
If the bio contains no data, bio_first_folio() calls page_folio() on a
NULL pointer and oopses. Move the test that we've reached the end of
the bio from bio_next_folio() to bio_first_folio().
Reported-by: syzbot+8b23309d5788a79d3eea@syzkaller.appspotmail.com
Reported-by: syzbot+004c1e0fced2b4bc3dcc@syzkaller.appspotmail.com
Fixes: 640d1930bef4 ("block: Add bio_for_each_folio_all()")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240116212959.3413014-1-willy@infradead.org
[axboe: add unlikely() to error case]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit ee0cf5e07f44a10fce8f1bfa9db226c0b5ecf880 ]
Add missing comma and remove extraneous NULL argument. The macro is
currently used by no one which explains why the typo slipped by.
Fixes: 2d34f09e79c9 ("clk: fixed-rate: Add support for specifying parents via DT/pointers")
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20231218-mbly-clk-v1-1-44ce54108f06@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0fe1798968115488c0c02f4633032a015b1faf97 ]
Send credit update message when SO_RCVLOWAT is updated and it is bigger
than number of bytes in rx queue. It is needed, because 'poll()' will
wait until number of bytes in rx queue will be not smaller than
O_RCVLOWAT, so kick sender to send more data. Otherwise mutual hungup
for tx/rx is possible: sender waits for free space and receiver is
waiting data in 'poll()'.
Rename 'set_rcvlowat' callback to 'notify_set_rcvlowat' and set
'sk->sk_rcvlowat' only in one place (i.e. 'vsock_set_rcvlowat'), so the
transport doesn't need to do it.
Fixes: b89d882dc9fc ("vsock/virtio: reduce credit update messages")
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 876673364161da50eed6b472d746ef88242b2368 ]
When updating or deleting an inner map in map array or map htab, the map
may still be accessed by non-sleepable program or sleepable program.
However bpf_map_fd_put_ptr() decreases the ref-counter of the inner map
directly through bpf_map_put(), if the ref-counter is the last one
(which is true for most cases), the inner map will be freed by
ops->map_free() in a kworker. But for now, most .map_free() callbacks
don't use synchronize_rcu() or its variants to wait for the elapse of a
RCU grace period, so after the invocation of ops->map_free completes,
the bpf program which is accessing the inner map may incur
use-after-free problem.
Fix the free of inner map by invoking bpf_map_free_deferred() after both
one RCU grace period and one tasks trace RCU grace period if the inner
map has been removed from the outer map before. The deferment is
accomplished by using call_rcu() or call_rcu_tasks_trace() when
releasing the last ref-counter of bpf map. The newly-added rcu_head
field in bpf_map shares the same storage space with work field to
reduce the size of bpf_map.
Fixes: bba1dc0b55ac ("bpf: Remove redundant synchronize_rcu.")
Fixes: 638e4b825d52 ("bpf: Allows per-cpu maps and map-in-map in sleepable programs")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231204140425.1480317-5-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 20c20bd11a0702ce4dc9300c3da58acf551d9725 ]
map is the pointer of outer map, and need_defer needs some explanation.
need_defer tells the implementation to defer the reference release of
the passed element and ensure that the element is still alive before
the bpf program, which may manipulate it, exits.
The following three cases will invoke map_fd_put_ptr() and different
need_defer values will be passed to these callers:
1) release the reference of the old element in the map during map update
or map deletion. The release must be deferred, otherwise the bpf
program may incur use-after-free problem, so need_defer needs to be
true.
2) release the reference of the to-be-added element in the error path of
map update. The to-be-added element is not visible to any bpf
program, so it is OK to pass false for need_defer parameter.
3) release the references of all elements in the map during map release.
Any bpf program which has access to the map must have been exited and
released, so need_defer=false will be OK.
These two parameters will be used by the following patches to fix the
potential use-after-free problem for map-in-map.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231204140425.1480317-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: 876673364161 ("bpf: Defer the free of inner map when necessary")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f76f0d7f20672611974d3cc705996751fc403734 ]
Extract a public function to set qm algs and remove
the similar code for setting qm algs in each module.
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: cf8b5156bbc8 ("crypto: hisilicon/hpre - save capability registers in probe process")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cabe13d0bd2efb8dd50ed2310f57b33e1a69a0d4 ]
In previous capability register implementation, qm irq related values
were read from capability registers dynamically when needed. But in
abnormal scenario, e.g. the core is timeout and the device needs to
soft reset and reset failed after disabling the MSE, the device can
not be removed normally, causing the following call trace:
| Call trace:
| pci_irq_vector+0xfc/0x140
| hisi_qm_uninit+0x278/0x3b0 [hisi_qm]
| hpre_remove+0x16c/0x1c0 [hisi_hpre]
| pci_device_remove+0x6c/0x264
| device_release_driver_internal+0x1ec/0x3e0
| device_release_driver+0x3c/0x60
| pci_stop_bus_device+0xfc/0x22c
| pci_stop_and_remove_bus_device+0x38/0x70
| pci_iov_remove_virtfn+0x108/0x1c0
| sriov_disable+0x7c/0x1e4
| pci_disable_sriov+0x4c/0x6c
| hisi_qm_sriov_disable+0x90/0x160 [hisi_qm]
| hpre_remove+0x1a8/0x1c0 [hisi_hpre]
| pci_device_remove+0x6c/0x264
| device_release_driver_internal+0x1ec/0x3e0
| driver_detach+0x168/0x2d0
| bus_remove_driver+0xc0/0x230
| driver_unregister+0x58/0xdc
| pci_unregister_driver+0x40/0x220
| hpre_exit+0x34/0x64 [hisi_hpre]
| __arm64_sys_delete_module+0x374/0x620
[...]
| Call trace:
| free_msi_irqs+0x25c/0x300
| pci_disable_msi+0x19c/0x264
| pci_free_irq_vectors+0x4c/0x70
| hisi_qm_pci_uninit+0x44/0x90 [hisi_qm]
| hisi_qm_uninit+0x28c/0x3b0 [hisi_qm]
| hpre_remove+0x16c/0x1c0 [hisi_hpre]
| pci_device_remove+0x6c/0x264
[...]
The reason for this call trace is that when the MSE is disabled, the value
of capability registers in the BAR space become invalid. This will make the
subsequent unregister process get the wrong irq vector through capability
registers and get the wrong irq number by pci_irq_vector().
So add a capability table structure to pre-store the valid value of the irq
information capability register in qm init process, avoid obtaining invalid
capability register value after the MSE is disabled.
Fixes: 3536cc55cada ("crypto: hisilicon/qm - support get device irq information from hardware registers")
Signed-off-by: Zhiqi Song <songzhiqi1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and netfilter.
We haven't accumulated much over the break. If it wasn't for the
uninterrupted stream of fixes for Intel drivers this PR would be very
slim. There was a handful of user reports, however, either they stood
out because of the lower traffic or users have had more time to test
over the break. The ones which are v6.7-relevant should be wrapped up.
Current release - regressions:
- Revert "net: ipv6/addrconf: clamp preferred_lft to the minimum
required", it caused issues on networks where routers send prefixes
with preferred_lft=0
- wifi:
- iwlwifi: pcie: don't synchronize IRQs from IRQ, prevent deadlock
- mac80211: fix re-adding debugfs entries during reconfiguration
Current release - new code bugs:
- tcp: print AO/MD5 messages only if there are any keys
Previous releases - regressions:
- virtio_net: fix missing dma unmap for resize, prevent OOM
Previous releases - always broken:
- mptcp: prevent tcp diag from closing listener subflows
- nf_tables:
- set transport header offset for egress hook, fix IPv4 mangling
- skip set commit for deleted/destroyed sets, avoid double deactivation
- nat: make sure action is set for all ct states, fix openvswitch
matching on ICMP packets in related state
- eth: mlxbf_gige: fix receive hang under heavy traffic
- eth: r8169: fix PCI error on system resume for RTL8168FP
- net: add missing getsockopt(SO_TIMESTAMPING_NEW) and cmsg handling"
* tag 'net-6.7-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
net/tcp: Only produce AO/MD5 logs if there are any keys
net: Implement missing SO_TIMESTAMPING_NEW cmsg support
bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()
net: ravb: Wait for operating mode to be applied
asix: Add check for usbnet_get_endpoints
octeontx2-af: Re-enable MAC TX in otx2_stop processing
octeontx2-af: Always configure NIX TX link credits based on max frame size
net/smc: fix invalid link access in dumping SMC-R connections
net/qla3xxx: fix potential memleak in ql_alloc_buffer_queues
virtio_net: fix missing dma unmap for resize
igc: Fix hicredit calculation
ice: fix Get link status data length
i40e: Restore VF MSI-X state during PCI reset
i40e: fix use-after-free in i40e_aqc_add_filters()
net: Save and restore msg_namelen in sock_sendmsg
netfilter: nft_immediate: drop chain reference counter on error
netfilter: nf_nat: fix action not being set for all ct states
net: bcmgenet: Fix FCS generation for fragmented skbuffs
mptcp: prevent tcp diag from closing listener subflows
MAINTAINERS: add Geliang as reviewer for MPTCP
...
|
|
Remove the @phy_timer: line to prevent the kernel-doc warning:
include/linux/phy.h:768: warning: Excess struct member 'phy_timer' description in 'phy_device'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: netdev@vger.kernel.org
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
struct optimistic_spin_node is private to the implementation.
Move it into the C file to ensure nothing is accessing it.
Signed-off-by: David Laight <david.laight@aculab.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull block fixes from Jens Axboe:
"Fix for a badly numbered flag, and a regression fix for the badblocks
updates from this merge window"
* tag 'block-6.7-2023-12-29' of git://git.kernel.dk/linux:
block: renumber QUEUE_FLAG_HW_WC
badblocks: avoid checking invalid range in badblocks_check()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Revive proper alignment for the ksymtab and kcrctab sections
- Fix gen_compile_commands.py tool to resolve symbolic links
- Fix symbolic links to installed debug VDSO files
- Update MAINTAINERS
* tag 'kbuild-fixes-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
linux/export: Ensure natural alignment of kcrctab array
kbuild: fix build ID symlinks to installed debug VDSO files
gen_compile_commands.py: fix path resolve with symlinks in it
MAINTAINERS: Add scripts/clang-tools to Kbuild section
linux/export: Fix alignment for 64-bit ksymtab entries
|
|
The ___kcrctab section holds an array of 32-bit CRC values.
Add a .balign 4 to tell the linker the correct memory alignment.
Fixes: f3304ecd7f06 ("linux/export: use inline assembler to populate symbol CRCs")
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
For the QUEUE_FLAG_HW_WC to actually work, it needs to have a separate
number from QUEUE_FLAG_FUA, doh.
Fixes: 43c9835b144c ("block: don't allow enabling a cache on devices that don't support it")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231226081524.180289-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are a small number of various driver fixes for 6.7-rc7 that
normally come through the char-misc tree, and one debugfs fix as well.
Included in here are:
- iio and hid sensor driver fixes for a number of small things
- interconnect driver fixes
- brcm_nvmem driver fixes
- debugfs fix for previous fix
- guard() definition in device.h so that many subsystems can start
using it for 6.8-rc1 (requested by Dan Williams to make future
merges easier)
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.7-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
debugfs: initialize cancellations earlier
Revert "iio: hid-sensor-als: Add light color temperature support"
Revert "iio: hid-sensor-als: Add light chromaticity support"
nvmem: brcm_nvram: store a copy of NVRAM content
dt-bindings: nvmem: mxs-ocotp: Document fsl,ocotp
driver core: Add a guard() definition for the device_lock()
interconnect: qcom: icc-rpm: Fix peak rate calculation
iio: adc: MCP3564: fix hardware identification logic
iio: adc: MCP3564: fix calib_bias and calib_scale range checks
iio: adc: meson: add separate config for axg SoC family
iio: adc: imx93: add four channels for imx93 adc
iio: adc: ti_am335x_adc: Fix return value check of tiadc_request_dma()
interconnect: qcom: sm8250: Enable sync_state
iio: triggered-buffer: prevent possible freeing of wrong buffer
iio: imu: inv_mpu6050: fix an error code problem in inv_mpu6050_read_raw
iio: imu: adis16475: use bit numbers in assign_bit()
iio: imu: adis16475: add spi_device_id table
iio: tmag5273: fix temperature offset
interconnect: Treat xlate() returning NULL node as an error
iio: common: ms_sensors: ms_sensors_i2c: fix humidity conversion time table
...
|
|
An alignment of 4 bytes is wrong for 64-bit platforms which don't define
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS (which then store 64-bit pointers).
Fix their alignment to 8 bytes.
Fixes: ddb5cdbafaaa ("kbuild: generate KSYMTAB entries by modpost")
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
