| Age | Commit message (Collapse) | Author |
|---|
|
commit 0217c7fb4de4a40cee667eb21901f3204effe5ac upstream.
In mfill_atomic_hugetlb(), linear_page_index() is used to calculate the
page index for hugetlb_fault_mutex_hash(). However, linear_page_index()
returns the index in PAGE_SIZE units, while hugetlb_fault_mutex_hash()
expects the index in huge page units. This mismatch means that different
addresses within the same huge page can produce different hash values,
leading to the use of different mutexes for the same huge page. This can
cause races between faulting threads, which can corrupt the reservation
map and trigger the BUG_ON in resv_map_release().
Fix this by introducing hugetlb_linear_page_index(), which returns the
page index in huge page granularity, and using it in place of
linear_page_index().
Link: https://lkml.kernel.org/r/20260310110526.335749-1-jianhuizzzzz@gmail.com
Fixes: a08c7193e4f1 ("mm/filemap: remove hugetlb special casing in filemap.c")
Signed-off-by: Jianhui Zhou <jianhuizzzzz@gmail.com>
Reported-by: syzbot+f525fd79634858f478e7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f525fd79634858f478e7
Acked-by: SeongJae Park <sj@kernel.org>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: JonasZhou <JonasZhou@zhaoxin.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0b16e69d17d8c35c5c9d5918bf596c75a44655d3 upstream.
When exiting to userspace to service an emulated MMIO write, copy the
to-be-written value to a scratch field in the MMIO fragment if the size
of the data payload is 8 bytes or less, i.e. can fit in a single chunk,
instead of pointing the fragment directly at the source value.
This fixes a class of use-after-free bugs that occur when the emulator
initiates a write using an on-stack, local variable as the source, the
write splits a page boundary, *and* both pages are MMIO pages. Because
KVM's ABI only allows for physically contiguous MMIO requests, accesses
that split MMIO pages are separated into two fragments, and are sent to
userspace one at a time. When KVM attempts to complete userspace MMIO in
response to KVM_RUN after the first fragment, KVM will detect the second
fragment and generate a second userspace exit, and reference the on-stack
variable.
The issue is most visible if the second KVM_RUN is performed by a separate
task, in which case the stack of the initiating task can show up as truly
freed data.
==================================================================
BUG: KASAN: use-after-free in complete_emulated_mmio+0x305/0x420
Read of size 1 at addr ffff888009c378d1 by task syz-executor417/984
CPU: 1 PID: 984 Comm: syz-executor417 Not tainted 5.10.0-182.0.0.95.h2627.eulerosv2r13.x86_64 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Call Trace:
dump_stack+0xbe/0xfd
print_address_description.constprop.0+0x19/0x170
__kasan_report.cold+0x6c/0x84
kasan_report+0x3a/0x50
check_memory_region+0xfd/0x1f0
memcpy+0x20/0x60
complete_emulated_mmio+0x305/0x420
kvm_arch_vcpu_ioctl_run+0x63f/0x6d0
kvm_vcpu_ioctl+0x413/0xb20
__se_sys_ioctl+0x111/0x160
do_syscall_64+0x30/0x40
entry_SYSCALL_64_after_hwframe+0x67/0xd1
RIP: 0033:0x42477d
Code: <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007faa8e6890e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000004d7338 RCX: 000000000042477d
RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 0000000000000005
RBP: 00000000004d7330 R08: 00007fff28d546df R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004d733c
R13: 0000000000000000 R14: 000000000040a200 R15: 00007fff28d54720
The buggy address belongs to the page:
page:0000000029f6a428 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9c37
flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0000000 0000000000000000 ffffea0000270dc8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888009c37780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888009c37800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff888009c37880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff888009c37900: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888009c37980: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
The bug can also be reproduced with a targeted KVM-Unit-Test by hacking
KVM to fill a large on-stack variable in complete_emulated_mmio(), i.e. by
overwrite the data value with garbage.
Limit the use of the scratch fields to 8-byte or smaller accesses, and to
just writes, as larger accesses and reads are not affected thanks to
implementation details in the emulator, but add a sanity check to ensure
those details don't change in the future. Specifically, KVM never uses
on-stack variables for accesses larger that 8 bytes, e.g. uses an operand
in the emulator context, and *all* reads are buffered through the mem_read
cache.
Note! Using the scratch field for reads is not only unnecessary, it's
also extremely difficult to handle correctly. As above, KVM buffers all
reads through the mem_read cache, and heavily relies on that behavior when
re-emulating the instruction after a userspace MMIO read exit. If a read
splits a page, the first page is NOT an MMIO page, and the second page IS
an MMIO page, then the MMIO fragment needs to point at _just_ the second
chunk of the destination, i.e. its position in the mem_read cache. Taking
the "obvious" approach of copying the fragment value into the destination
when re-emulating the instruction would clobber the first chunk of the
destination, i.e. would clobber the data that was read from guest memory.
Fixes: f78146b0f923 ("KVM: Fix page-crossing MMIO")
Suggested-by: Yashu Zhang <zhangjiaji1@huawei.com>
Reported-by: Yashu Zhang <zhangjiaji1@huawei.com>
Closes: https://lore.kernel.org/all/369eaaa2b3c1425c85e8477066391bc7@huawei.com
Cc: stable@vger.kernel.org
Tested-by: Tom Lendacky <thomas.lendacky@gmail.com>
Tested-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Link: https://patch.msgid.link/20260225012049.920665-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5de7bcaadf160c1716b20a263cf8f5b06f658959 upstream.
Similarly to the previous commit, this renames the somewhat confusingly
named function. But in this case, it was at least less confusing: the
__copy_from_user_inatomic_nocache is indeed copying from user memory,
and it is indeed ok to be used in an atomic context, so it will not warn
about it.
But the previous commit also removed the NTB mis-use of the
__copy_from_user_inatomic_nocache() function, and as a result every
call-site is now _actually_ doing a real user copy. That means that we
can now do the proper user pointer verification too.
End result: add proper address checking, remove the double underscores,
and change the "nocache" to "nontemporal" to more accurately describe
what this x86-only function actually does. It might be worth noting
that only the target is non-temporal: the actual user accesses are
normal memory accesses.
Also worth noting is that non-x86 targets (and on older 32-bit x86 CPU's
before XMM2 in the Pentium III) we end up just falling back on a regular
user copy, so nothing can actually depend on the non-temporal semantics,
but that has always been true.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit da142f3d373a6ddaca0119615a8db2175ddc4121 ]
Remove KVM's internal pseudo-overlay of kvm_stats_desc, which subtly
aliases the flexible name[] in the uAPI definition with a fixed-size array
of the same name. The unusual embedded structure results in compiler
warnings due to -Wflex-array-member-not-at-end, and also necessitates an
extra level of dereferencing in KVM. To avoid the "overlay", define the
uAPI structure to have a fixed-size name when building for the kernel.
Opportunistically clean up the indentation for the stats macros, and
replace spaces with tabs.
No functional change intended.
Reported-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Closes: https://lore.kernel.org/all/aPfNKRpLfhmhYqfP@kspp
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
[..]
Acked-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/20251205232655.445294-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Stable-dep-of: 2619da73bb2f ("KVM: x86: Use __DECLARE_FLEX_ARRAY() for UAPI structures with VLAs")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 624bf3440d7214b62c22d698a0a294323f331d5d upstream.
Reject LAUNCH_FINISH for SEV-ES and SNP VMs if KVM is actively creating
one or more vCPUs, as KVM needs to process and encrypt each vCPU's VMSA.
Letting userspace create vCPUs while LAUNCH_FINISH is in-progress is
"fine", at least in the current code base, as kvm_for_each_vcpu() operates
on online_vcpus, LAUNCH_FINISH (all SEV+ sub-ioctls) holds kvm->mutex, and
fully onlining a vCPU in kvm_vm_ioctl_create_vcpu() is done under
kvm->mutex. I.e. there's no difference between an in-progress vCPU and a
vCPU that is created entirely after LAUNCH_FINISH.
However, given that concurrent LAUNCH_FINISH and vCPU creation can't
possibly work (for any reasonable definition of "work"), since userspace
can't guarantee whether a particular vCPU will be encrypted or not,
disallow the combination as a hardening measure, to reduce the probability
of introducing bugs in the future, and to avoid having to reason about the
safety of future changes related to LAUNCH_FINISH.
Cc: Jethro Beekman <jethro@fortanix.com>
Closes: https://lore.kernel.org/all/b31f7c6e-2807-4662-bcdd-eea2c1e132fa@fortanix.com
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260310234829.2608037-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 61868dc55a119a5e4b912d458fc2c48ba80a35fe ]
When multiple small DMA_FROM_DEVICE or DMA_BIDIRECTIONAL buffers share a
cacheline, and DMA_API_DEBUG is enabled, we get this warning:
cacheline tracking EEXIST, overlapping mappings aren't supported.
This is because when one of the mappings is removed, while another one
is active, CPU might write into the buffer.
Add an attribute for the driver to promise not to do this, making the
overlapping safe, and suppressing the warning.
Message-ID: <2d5d091f9d84b68ea96abd545b365dd1d00bbf48.1767601130.git.mst@redhat.com>
Reviewed-by: Petr Tesarik <ptesarik@suse.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stable-dep-of: 3d48c9fd78dd ("dma-debug: suppress cacheline overlap warning when arch has no DMA alignment requirement")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 641f6fda143b879da1515f821ee475073678cf2a ]
It looks element length declared in servreg_loc_pfr_req_ei for reason
not matching servreg_loc_pfr_req's reason field due which we could
observe decoding error on PD crash.
qmi_decode_string_elem: String len 81 >= Max Len 65
Fix this by matching with servreg_loc_pfr_req's reason field.
Fixes: 1ebcde047c54 ("soc: qcom: add pd-mapper implementation")
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20260129152320.3658053-2-mukesh.ojha@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 52f657e34d7b21b47434d9d8b26fa7f6778b63a0 ]
김영민 reports that shstk_pop_sigframe() doesn't check for errors from
mmap_read_lock_killable(), which is a silly oversight, and also shows
that we haven't marked those functions with "__must_check", which would
have immediately caught it.
So let's fix both issues.
Reported-by: 김영민 <osori@hspace.io>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 88c4bd90725557796c15878b7cb70066e9e6b5ab upstream.
Addresses two issues in the TH1520 AON firmware protocol driver:
1. Fix a potential buffer overflow where the code used unsafe pointer
arithmetic to access the 'mode' field through the 'resource' pointer
with an offset. This was flagged by Smatch static checker as:
"buffer overflow 'data' 2 <= 3"
2. Replace custom RPC_SET_BE* and RPC_GET_BE* macros with standard
kernel endianness conversion macros (cpu_to_be16, etc.) for better
portability and maintainability.
The functionality was re-tested with the GPU power-up sequence,
confirming the GPU powers up correctly and the driver probes
successfully.
[ 12.702370] powervr ffef400000.gpu: [drm] loaded firmware
powervr/rogue_36.52.104.182_v1.fw
[ 12.711043] powervr ffef400000.gpu: [drm] FW version v1.0 (build
6645434 OS)
[ 12.719787] [drm] Initialized powervr 1.0.0 for ffef400000.gpu on
minor 0
Fixes: e4b3cbd840e5 ("firmware: thead: Add AON firmware protocol driver")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/17a0ccce-060b-4b9d-a3c4-8d5d5823b1c9@stanley.mountain/
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Drew Fustini <fustini@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bd3d245b0fef571f93504904df62b8865b1c0d34 upstream.
Replace the coarse USB device lock with a dedicated offload_lock
spinlock to reduce contention during offload operations. Use
offload_pm_locked to synchronize with PM transitions and replace
the legacy offload_at_suspend flag.
Optimize usb_offload_get/put by switching from auto-resume/suspend
to pm_runtime_get_if_active(). This ensures offload state is only
modified when the device is already active, avoiding unnecessary
power transitions.
Cc: stable <stable@kernel.org>
Fixes: ef82a4803aab ("xhci: sideband: add api to trace sideband usage")
Signed-off-by: Guan-Yu Lin <guanyulin@google.com>
Tested-by: Hailong Liu <hailong.liu@oppo.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260401123238.3790062-2-guanyulin@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 56bd57e7b161f75535df91b229b0b2c64c6e5581 upstream.
Add a new IIO_DECLARE_QUATERNION() macro that is used to declare the
field in an IIO buffer struct that contains a quaternion vector.
Quaternions are currently the only IIO data type that uses the .repeat
feature of struct iio_scan_type. This has an implicit rule that the
element in the buffer must be aligned to the entire size of the repeated
element. This macro will make that requirement explicit. Since this is
the only user, we just call the macro IIO_DECLARE_QUATERNION() instead
of something more generic.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b7e8590987aa94c9dc51518fad0e58cb887b1db5 ]
IPSET_ATTR_NAME and IPSET_ATTR_NAMEREF are of NLA_STRING type, they
cannot be treated like a c-string.
They either have to be switched to NLA_NUL_STRING, or the compare
operations need to use the nla functions.
Fixes: f830837f0eed ("netfilter: ipset: list:set set type support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 31c5a71d982b57df75858974634c2f0a338f2fc6 ]
Some/most devices implementing gso_partial need to disable the GSO partial
features when the IP ID can't be mangled; to that extend each of them
implements something alike the following[1]:
if (skb->encapsulation && !(features & NETIF_F_TSO_MANGLEID))
features &= ~NETIF_F_TSO;
in the ndo_features_check() op, which leads to a bit of duplicate code.
Later patch in the series will implement GSO partial support for virtual
devices, and the current status quo will require more duplicate code and
a new indirect call in the TX path for them.
Introduce the mangleid_features mask, allowing the core to disable NIC
features based on/requiring MANGLEID, without any further intervention
from the driver.
The same functionality could be alternatively implemented adding a single
boolean flag to the struct net_device, but would require an additional
checks in ndo_features_check().
Also note that [1] is incorrect if the NIC additionally implements
NETIF_F_GSO_UDP_L4, mangleid_features transparently handle even such a
case.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/5a7cdaeea40b0a29b88e525b6c942d73ed3b8ce7.1769011015.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: ddc748a391dd ("net: use skb_header_pointer() for TCPv4 GSO frag_off check")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 57a04a13aac1f247d171c3f3aef93efc69e6979e ]
__skb_ext_put() is not declared if SKB_EXTENSIONS is not enabled, which
causes a build error:
drivers/net/netdevsim/netdev.c: In function 'nsim_forward_skb':
drivers/net/netdevsim/netdev.c:114:25: error: implicit declaration of function '__skb_ext_put'; did you mean 'skb_ext_put'? [-Werror=implicit-function-declaration]
114 | __skb_ext_put(psp_ext);
| ^~~~~~~~~~~~~
| skb_ext_put
cc1: some warnings being treated as errors
Add a stub to fix the build.
Fixes: 7d9351435ebb ("netdevsim: drop PSP ext ref on forward failure")
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://patch.msgid.link/20260324140857.783-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 190a8c48ff623c3d67cb295b4536a660db2012aa ]
During futex_key_to_node_opt() execution, vma->vm_policy is read under
speculative mmap lock and RCU. Concurrently, mbind() may call
vma_replace_policy() which frees the old mempolicy immediately via
kmem_cache_free().
This creates a race where __futex_key_to_node() dereferences a freed
mempolicy pointer, causing a use-after-free read of mpol->mode.
[ 151.412631] BUG: KASAN: slab-use-after-free in __futex_key_to_node (kernel/futex/core.c:349)
[ 151.414046] Read of size 2 at addr ffff888001c49634 by task e/87
[ 151.415969] Call Trace:
[ 151.416732] __asan_load2 (mm/kasan/generic.c:271)
[ 151.416777] __futex_key_to_node (kernel/futex/core.c:349)
[ 151.416822] get_futex_key (kernel/futex/core.c:374 kernel/futex/core.c:386 kernel/futex/core.c:593)
Fix by adding rcu to __mpol_put().
Fixes: c042c505210d ("futex: Implement FUTEX2_MPOL")
Reported-by: Hao-Yu Yang <naup96721@gmail.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Hao-Yu Yang <naup96721@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Link: https://patch.msgid.link/20260324174418.GB1850007@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0e764b9d46071668969410ec5429be0e2f38c6d3 ]
The netfs_io_stream::front member is meant to point to the subrequest
currently being collected on a stream, but it isn't actually used this way
by direct write (which mostly ignores it). However, there's a tracepoint
which looks at it. Further, stream->front is actually redundant with
stream->subrequests.next.
Fix the potential problem in the direct code by just removing the member
and using stream->subrequests.next instead, thereby also simplifying the
code.
Fixes: a0b4c7a49137 ("netfs: Fix unbuffered/DIO writes to dispatch subrequests in strict sequence")
Reported-by: Paulo Alcantara <pc@manguebit.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/4158599.1774426817@warthog.procyon.org.uk
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4c5e7f0fcd592801c9cc18f29f80fbee84eb8669 ]
On arm64 server, we found folio that get from migration entry isn't locked
in softleaf_to_folio(). This issue triggers when mTHP splitting and
zap_nonpresent_ptes() races, and the root cause is lack of memory barrier
in softleaf_to_folio(). The race is as follows:
CPU0 CPU1
deferred_split_scan() zap_nonpresent_ptes()
lock folio
split_folio()
unmap_folio()
change ptes to migration entries
__split_folio_to_order() softleaf_to_folio()
set flags(including PG_locked) for tail pages folio = pfn_folio(softleaf_to_pfn(entry))
smp_wmb() VM_WARN_ON_ONCE(!folio_test_locked(folio))
prep_compound_page() for tail pages
In __split_folio_to_order(), smp_wmb() guarantees page flags of tail pages
are visible before the tail page becomes non-compound. smp_wmb() should
be paired with smp_rmb() in softleaf_to_folio(), which is missed. As a
result, if zap_nonpresent_ptes() accesses migration entry that stores tail
pfn, softleaf_to_folio() may see the updated compound_head of tail page
before page->flags.
This issue will trigger VM_WARN_ON_ONCE() in pfn_swap_entry_folio()
because of the race between folio split and zap_nonpresent_ptes()
leading to a folio incorrectly undergoing modification without a folio
lock being held.
This is a BUG_ON() before commit 93976a20345b ("mm: eliminate further
swapops predicates"), which in merged in v6.19-rc1.
To fix it, add missing smp_rmb() if the softleaf entry is migration entry
in softleaf_to_folio() and softleaf_to_page().
[tujinjiang@huawei.com: update function name and comments]
Link: https://lkml.kernel.org/r/20260321075214.3305564-1-tujinjiang@huawei.com
Link: https://lkml.kernel.org/r/20260319012541.4158561-1-tujinjiang@huawei.com
Fixes: e9b61f19858a ("thp: reintroduce split_huge_page()")
Signed-off-by: Jinjiang Tu <tujinjiang@huawei.com>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Lorenzo Stoakes (Oracle) <ljs@kernel.org>
Cc: Barry Song <baohua@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ applied fix to swapops.h using old pfn_swap_entry/swp_entry_t naming ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 26f775a054c3cda86ad465a64141894a90a9e145 upstream.
One major usage of damon_call() is online DAMON parameters update. It is
done by calling damon_commit_ctx() inside the damon_call() callback
function. damon_commit_ctx() can fail for two reasons: 1) invalid
parameters and 2) internal memory allocation failures. In case of
failures, the damon_ctx that attempted to be updated (commit destination)
can be partially updated (or, corrupted from a perspective), and therefore
shouldn't be used anymore. The function only ensures the damon_ctx object
can safely deallocated using damon_destroy_ctx().
The API callers are, however, calling damon_commit_ctx() only after
asserting the parameters are valid, to avoid damon_commit_ctx() fails due
to invalid input parameters. But it can still theoretically fail if the
internal memory allocation fails. In the case, DAMON may run with the
partially updated damon_ctx. This can result in unexpected behaviors
including even NULL pointer dereference in case of damos_commit_dests()
failure [1]. Such allocation failure is arguably too small to fail, so
the real world impact would be rare. But, given the bad consequence, this
needs to be fixed.
Avoid such partially-committed (maybe-corrupted) damon_ctx use by saving
the damon_commit_ctx() failure on the damon_ctx object. For this,
introduce damon_ctx->maybe_corrupted field. damon_commit_ctx() sets it
when it is failed. kdamond_call() checks if the field is set after each
damon_call_control->fn() is executed. If it is set, ignore remaining
callback requests and return. All kdamond_call() callers including
kdamond_fn() also check the maybe_corrupted field right after
kdamond_call() invocations. If the field is set, break the kdamond_fn()
main loop so that DAMON sill doesn't use the context that might be
corrupted.
[sj@kernel.org: let kdamond_call() with cancel regardless of maybe_corrupted]
Link: https://lkml.kernel.org/r/20260320031553.2479-1-sj@kernel.org
Link: https://sashiko.dev/#/patchset/20260319145218.86197-1-sj%40kernel.org
Link: https://lkml.kernel.org/r/20260319145218.86197-1-sj@kernel.org
Link: https://lore.kernel.org/20260319043309.97966-1-sj@kernel.org [1]
Fixes: 3301f1861d34 ("mm/damon/sysfs: handle commit command using damon_call()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 76f9377cd2ab7a9220c25d33940d9ca20d368172 upstream.
Add a SB_I_NO_DATA_INTEGRITY superblock flag for filesystems that cannot
guarantee data persistence on sync (eg fuse). For superblocks with this
flag set, sync kicks off writeback of dirty inodes but does not wait
for the flusher threads to complete the writeback.
This replaces the per-inode AS_NO_DATA_INTEGRITY mapping flag added in
commit f9a49aa302a0 ("fs/writeback: skip AS_NO_DATA_INTEGRITY mappings
in wait_sb_inodes()"). The flag belongs at the superblock level because
data integrity is a filesystem-wide property, not a per-inode one.
Having this flag at the superblock level also allows us to skip having
to iterate every dirty inode in wait_sb_inodes() only to skip each inode
individually.
Prior to this commit, mappings with no data integrity guarantees skipped
waiting on writeback completion but still waited on the flusher threads
to finish initiating the writeback. Waiting on the flusher threads is
unnecessary. This commit kicks off writeback but does not wait on the
flusher threads. This change properly addresses a recent report [1] for
a suspend-to-RAM hang seen on fuse-overlayfs that was caused by waiting
on the flusher threads to finish:
Workqueue: pm_fs_sync pm_fs_sync_work_fn
Call Trace:
<TASK>
__schedule+0x457/0x1720
schedule+0x27/0xd0
wb_wait_for_completion+0x97/0xe0
sync_inodes_sb+0xf8/0x2e0
__iterate_supers+0xdc/0x160
ksys_sync+0x43/0xb0
pm_fs_sync_work_fn+0x17/0xa0
process_one_work+0x193/0x350
worker_thread+0x1a1/0x310
kthread+0xfc/0x240
ret_from_fork+0x243/0x280
ret_from_fork_asm+0x1a/0x30
</TASK>
On fuse this is problematic because there are paths that may cause the
flusher thread to block (eg if systemd freezes the user session cgroups
first, which freezes the fuse daemon, before invoking the kernel
suspend. The kernel suspend triggers ->write_node() which on fuse issues
a synchronous setattr request, which cannot be processed since the
daemon is frozen. Or if the daemon is buggy and cannot properly complete
writeback, initiating writeback on a dirty folio already under writeback
leads to writeback_get_folio() -> folio_prepare_writeback() ->
unconditional wait on writeback to finish, which will cause a hang).
This commit restores fuse to its prior behavior before tmp folios were
removed, where sync was essentially a no-op.
[1] https://lore.kernel.org/linux-fsdevel/CAJnrk1a-asuvfrbKXbEwwDSctvemF+6zfhdnuzO65Pt8HsFSRw@mail.gmail.com/T/#m632c4648e9cafc4239299887109ebd880ac6c5c1
Fixes: 0c58a97f919c ("fuse: remove tmp folio for writebacks and internal rb tree")
Reported-by: John <therealgraysky@proton.me>
Cc: stable@vger.kernel.org
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20260320005145.2483161-2-joannelkoong@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cc34d77dd48708d810c12bfd6f5bf03304f6c824 ]
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Also note that we do not enable the driver_override feature of struct
bus_type, as SPI - in contrast to most other buses - passes "" to
sysfs_emit() when the driver_override pointer is NULL. Thus, printing
"\n" instead of "(null)\n".
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1]
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Fixes: 5039563e7c25 ("spi: Add driver_override SPI device attribute")
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260324005919.2408620-12-dakr@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2cdaff22ed26f1e619aa2b43f27bb84f2c6ef8f8 ]
Under an UML build for an upcoming series [1], I got `-Wstatic-in-inline`
for `dma_free_attrs`:
BINDGEN rust/bindings/bindings_generated.rs - due to target missing
In file included from rust/helpers/helpers.c:59:
rust/helpers/dma.c:17:2: warning: static function 'dma_free_attrs' is used in an inline function with external linkage [-Wstatic-in-inline]
17 | dma_free_attrs(dev, size, cpu_addr, dma_handle, attrs);
| ^
rust/helpers/dma.c:12:1: note: use 'static' to give inline function 'rust_helper_dma_free_attrs' internal linkage
12 | __rust_helper void rust_helper_dma_free_attrs(struct device *dev, size_t size,
| ^
| static
The issue is that `dma_free_attrs` was not marked `inline` when it was
introduced alongside the rest of the stubs.
Thus mark it.
Fixes: ed6ccf10f24b ("dma-mapping: properly stub out the DMA API for !CONFIG_HAS_DMA")
Closes: https://lore.kernel.org/rust-for-linux/20260322194616.89847-1-ojeda@kernel.org/ [1]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260325015548.70912-1-ojeda@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6c860dc02a8e60b438e26940227dfa641fcdb66a ]
The commit a2fb4bc4e2a6a03 ("net: implement virtio helpers to handle UDP
GSO tunneling.") introduces support for the UDP GSO tunnel feature in
virtio-net.
The virtio spec says:
If the \field{gso_type} has the VIRTIO_NET_HDR_GSO_UDP_TUNNEL_IPV4 bit or
VIRTIO_NET_HDR_GSO_UDP_TUNNEL_IPV6 bit set, \field{hdr_len} accounts for
all the headers up to and including the inner transport.
The commit did not update the hdr_len to include the inner transport.
I observed that the "hdr_len" is 116 for this packet:
17:36:18.241105 52:55:00:d1:27:0a > 2e:2c:df:46:a9:e1, ethertype IPv4 (0x0800), length 2912: (tos 0x0, ttl 64, id 45197, offset 0, flags [none], proto UDP (17), length 2898)
192.168.122.100.50613 > 192.168.122.1.4789: [bad udp cksum 0x8106 -> 0x26a0!] VXLAN, flags [I] (0x08), vni 1
fa:c3:ba:82:05:ee > ce:85:0c:31:77:e5, ethertype IPv4 (0x0800), length 2862: (tos 0x0, ttl 64, id 14678, offset 0, flags [DF], proto TCP (6), length 2848)
192.168.3.1.49880 > 192.168.3.2.9898: Flags [P.], cksum 0x9266 (incorrect -> 0xaa20), seq 515667:518463, ack 1, win 64, options [nop,nop,TS val 2990048824 ecr 2798801412], length 2796
116 = 14(mac) + 20(ip) + 8(udp) + 8(vxlan) + 14(inner mac) + 20(inner ip) + 32(innner tcp)
Fixes: a2fb4bc4e2a6a03 ("net: implement virtio helpers to handle UDP GSO tunneling.")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20260320021818.111741-3-xuanzhuo@linux.alibaba.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 38ec410b99a5ee6566f75650ce3d4fd632940fd0 ]
The commit be50da3e9d4a ("net: virtio_net: implement exact header length
guest feature") introduces support for the VIRTIO_NET_F_GUEST_HDRLEN
feature in virtio-net.
This feature requires virtio-net to set hdr_len to the actual header
length of the packet when transmitting, the number of
bytes from the start of the packet to the beginning of the
transport-layer payload.
However, in practice, hdr_len was being set using skb_headlen(skb),
which is clearly incorrect. This commit fixes that issue.
Fixes: be50da3e9d4a ("net: virtio_net: implement exact header length guest feature")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20260320021818.111741-2-xuanzhuo@linux.alibaba.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9f6a983cfa22ac662c86e60816d3a357d4b551e9 ]
Some USB devices incorrectly report bNumConfigurations as 0 in their
device descriptor, which causes the USB core to reject them during
enumeration.
logs:
usb 1-2: device descriptor read/64, error -71
usb 1-2: no configurations
usb 1-2: can't read configurations, error -22
However, these devices actually work correctly when
treated as having a single configuration.
Add a new quirk USB_QUIRK_FORCE_ONE_CONFIG to handle such devices.
When this quirk is set, assume the device has 1 configuration instead
of failing with -EINVAL.
This quirk is applied to the device with VID:PID 5131:2007 which
exhibits this behavior.
Signed-off-by: Jie Deng <dengjie03@kylinos.cn>
Link: https://patch.msgid.link/20260227084931.1527461-1-dengjie03@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 15fba71533bcdfaa8eeba69a5a5a2927afdf664a ]
The TRENDnet TUC-ET2G is a RTL8156 based usb ethernet adapter. Add its
vendor and product IDs.
Signed-off-by: Valentin Spreckels <valentin@spreckels.dev>
Link: https://patch.msgid.link/20260226195409.7891-2-valentin@spreckels.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2b38efc05bf7a8568ec74bfffea0f5cfa62bc01d ]
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1]
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Fixes: 3d713e0e382e ("driver core: platform: add device binding path 'driver_override'")
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260303115720.48783-5-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cb3d1049f4ea77d5ad93f17d8ac1f2ed4da70501 ]
Currently, there are 12 busses (including platform and PCI) that
duplicate the driver_override logic for their individual devices.
All of them seem to be prone to the bug described in [1].
While this could be solved for every bus individually using a separate
lock, solving this in the driver-core generically results in less (and
cleaner) changes overall.
Thus, move driver_override to struct device, provide corresponding
accessors for busses and handle locking with a separate lock internally.
In particular, add device_set_driver_override(),
device_has_driver_override(), device_match_driver_override() and
generalize the sysfs store() and show() callbacks via a driver_override
feature flag in struct bus_type.
Until all busses have migrated, keep driver_set_override() in place.
Note that we can't use the device lock for the reasons described in [2].
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220789 [1]
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [2]
Tested-by: Gui-Dong Han <hanguidong02@gmail.com>
Co-developed-by: Gui-Dong Han <hanguidong02@gmail.com>
Signed-off-by: Gui-Dong Han <hanguidong02@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260303115720.48783-2-dakr@kernel.org
[ Use dev->bus instead of sp->bus for consistency; fix commit message to
refer to the struct bus_type's driver_override feature flag. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Stable-dep-of: 2b38efc05bf7 ("driver core: platform: use generic driver_override infrastructure")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 1613462be621ad5103ec338a7b0ca0746ec4e5f1 upstream.
When running in an unprivileged domU under Xen, the privcmd driver
is restricted to allow only hypercalls against a target domain, for
which the current domU is acting as a device model.
Add a boot parameter "unrestricted" to allow all hypercalls (the
hypervisor will still refuse destructive hypercalls affecting other
guests).
Make this new parameter effective only in case the domU wasn't started
using secure boot, as otherwise hypercalls targeting the domU itself
might result in violating the secure boot functionality.
This is achieved by adding another lockdown reason, which can be
tested to not being set when applying the "unrestricted" option.
This is part of XSA-482
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4ced4cf5c9d172d91f181df3accdf949d3761aab ]
Commit 4e6e8c2b757f ("binfmt_elf: Wire up AT_HWCAP3 at AT_HWCAP4") added
support for AT_HWCAP3 and AT_HWCAP4, but it missed updating the AUX
vector size calculation in create_elf_fdpic_tables() and
AT_VECTOR_SIZE_BASE in include/linux/auxvec.h.
Similar to the fix for AT_HWCAP2 in commit c6a09e342f8e ("binfmt_elf_fdpic:
fix AUXV size calculation when ELF_HWCAP2 is defined"), this omission
leads to a mismatch between the reserved space and the actual number of
AUX entries, eventually triggering a kernel BUG_ON(csp != sp).
Fix this by incrementing nitems when ELF_HWCAP3 or ELF_HWCAP4 are
defined and updating AT_VECTOR_SIZE_BASE.
Cc: Mark Brown <broonie@kernel.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@futurfusion.io>
Fixes: 4e6e8c2b757f ("binfmt_elf: Wire up AT_HWCAP3 at AT_HWCAP4")
Signed-off-by: Andrei Vagin <avagin@google.com>
Link: https://patch.msgid.link/20260217180108.1420024-2-avagin@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b7405dcf7385445e10821777143f18c3ce20fa04 ]
bond_header_parse() can loop if a stack of two bonding devices is setup,
because skb->dev always points to the hierarchy top.
Add new "const struct net_device *dev" parameter to
(struct header_ops)->parse() method to make sure the recursion
is bounded, and that the final leaf parse method is called.
Fixes: 950803f72547 ("bonding: fix type confusion in bond_setup_by_slave()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Tested-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Cc: Jay Vosburgh <jv@jvosburgh.net>
Cc: Andrew Lunn <andrew+netdev@lunn.ch>
Link: https://patch.msgid.link/20260315104152.1436867-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 8324a54f604da18f21070702a8ad82ab2062787b upstream.
8250_port exports serial8250_handle_irq() to HW specific 8250 drivers.
It takes port's lock within but a HW specific 8250 driver may want to
take port's lock itself, do something, and then call the generic
handler in 8250_port but to do that, the caller has to release port's
lock for no good reason.
Introduce serial8250_handle_irq_locked() which a HW specific driver can
call while already holding port's lock.
As this is new export, put it straight into a namespace (where all 8250
exports should eventually be moved).
Tested-by: Bandal, Shankar <shankar.bandal@intel.com>
Tested-by: Murthy, Shanth <shanth.murthy@intel.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260203171049.4353-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5eb608319bb56464674a71b4a66ea65c6c435d64 upstream.
The alternate screen support added by commit 23743ba64709 ("vt: add
support for smput/rmput escape codes") only saves and restores the
regular screen buffer (vc_origin), but completely ignores the corresponding
unicode screen buffer (vc_uni_lines) creating a messed-up display.
Add vc_saved_uni_lines to save the unicode screen buffer when entering
the alternate screen, and restore it when leaving. Also ensure proper
cleanup in reset_terminal() and vc_deallocate().
Fixes: 23743ba64709 ("vt: add support for smput/rmput escape codes")
Cc: stable <stable@kernel.org>
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Link: https://patch.msgid.link/5o2p6qp3-91pq-0p17-or02-1oors4417ns7@onlyvoer.pbz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 418eab7a6f3c002d8e64d6e95ec27118017019af upstream.
When io_should_commit() returns true (eg for non-pollable files), buffer
commit happens at buffer selection time and sel->buf_list is set to
NULL. When __io_put_kbufs() generates CQE flags at completion time, it
calls __io_put_kbuf_ring() which finds a NULL buffer_list and hence
cannot determine whether the buffer was consumed or not. This means that
IORING_CQE_F_BUF_MORE is never set for non-pollable input with
incrementally consumed buffers.
Likewise for io_buffers_select(), which always commits upfront and
discards the return value of io_kbuf_commit().
Add REQ_F_BUF_MORE to store the result of io_kbuf_commit() during early
commit. Then __io_put_kbuf_ring() can check this flag and set
IORING_F_BUF_MORE accordingy.
Reported-by: Martin Michaelis <code@mgjm.de>
Cc: stable@vger.kernel.org
Fixes: ae98dbf43d75 ("io_uring/kbuf: add support for incremental buffer consumption")
Link: https://github.com/axboe/liburing/issues/1553
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e6b899f08066e744f89df16ceb782e06868bd148 ]
Even privileged services should not necessarily be able to see other
privileged service's namespaces so they can't leak information to each
other. Use may_see_all_namespaces() helper that centralizes this policy
until the nstree adapts.
Link: https://patch.msgid.link/20260226-work-visibility-fixes-v1-1-d2c2853313bd@kernel.org
Fixes: a1d220d9dafa ("nsfs: iterate through mount namespaces")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: stable@kernel.org # v6.12+
Signed-off-by: Christian Brauner <brauner@kernel.org>
[ context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 96189080265e6bb5dde3a4afbaf947af493e3f82 upstream.
If DEFER_TASKRUN | SETUP_TASKRUN is used and task work is added while
the ring is being resized, it's possible for the OR'ing of
IORING_SQ_TASKRUN to happen in the small window of swapping into the
new rings and the old rings being freed.
Prevent this by adding a 2nd ->rings pointer, ->rings_rcu, which is
protected by RCU. The task work flags manipulation is inside RCU
already, and if the resize ring freeing is done post an RCU synchronize,
then there's no need to add locking to the fast path of task work
additions.
Note: this is only done for DEFER_TASKRUN, as that's the only setup mode
that supports ring resizing. If this ever changes, then they too need to
use the io_ctx_mark_taskrun() helper.
Link: https://lore.kernel.org/io-uring/20260309062759.482210-1-naup96721@gmail.com/
Cc: stable@vger.kernel.org
Fixes: 79cfe9e59c2a ("io_uring/register: add IORING_REGISTER_RESIZE_RINGS")
Reported-by: Hao-Yu Yang <naup96721@gmail.com>
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b570f37a2ce480be26c665345c5514686a8a0274 upstream.
If hmm_range_fault() fails a folio_trylock() in do_swap_page,
trying to acquire the lock of a device-private folio for migration,
to ram, the function will spin until it succeeds grabbing the lock.
However, if the process holding the lock is depending on a work
item to be completed, which is scheduled on the same CPU as the
spinning hmm_range_fault(), that work item might be starved and
we end up in a livelock / starvation situation which is never
resolved.
This can happen, for example if the process holding the
device-private folio lock is stuck in
migrate_device_unmap()->lru_add_drain_all()
sinc lru_add_drain_all() requires a short work-item
to be run on all online cpus to complete.
A prerequisite for this to happen is:
a) Both zone device and system memory folios are considered in
migrate_device_unmap(), so that there is a reason to call
lru_add_drain_all() for a system memory folio while a
folio lock is held on a zone device folio.
b) The zone device folio has an initial mapcount > 1 which causes
at least one migration PTE entry insertion to be deferred to
try_to_migrate(), which can happen after the call to
lru_add_drain_all().
c) No or voluntary only preemption.
This all seems pretty unlikely to happen, but indeed is hit by
the "xe_exec_system_allocator" igt test.
Resolve this by waiting for the folio to be unlocked if the
folio_trylock() fails in do_swap_page().
Rename migration_entry_wait_on_locked() to
softleaf_entry_wait_unlock() and update its documentation to
indicate the new use-case.
Future code improvements might consider moving
the lru_add_drain_all() call in migrate_device_unmap() to be
called *after* all pages have migration entries inserted.
That would eliminate also b) above.
v2:
- Instead of a cond_resched() in hmm_range_fault(),
eliminate the problem by waiting for the folio to be unlocked
in do_swap_page() (Alistair Popple, Andrew Morton)
v3:
- Add a stub migration_entry_wait_on_locked() for the
!CONFIG_MIGRATION case. (Kernel Test Robot)
v4:
- Rename migrate_entry_wait_on_locked() to
softleaf_entry_wait_on_locked() and update docs (Alistair Popple)
v5:
- Add a WARN_ON_ONCE() for the !CONFIG_MIGRATION
version of softleaf_entry_wait_on_locked().
- Modify wording around function names in the commit message
(Andrew Morton)
Suggested-by: Alistair Popple <apopple@nvidia.com>
Fixes: 1afaeb8293c9 ("mm/migrate: Trylock device page in do_swap_page")
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: linux-mm@kvack.org
Cc: <dri-devel@lists.freedesktop.org>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.15+
Reviewed-by: John Hubbard <jhubbard@nvidia.com> #v3
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://patch.msgid.link/20260210115653.92413-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit a69d1ab971a624c6f112cea61536569d579c3215)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 55f854dd5bdd8e19b936a00ef1f8d776ac32c7b0 upstream.
Commit c7159e960f14 ("usbnet: limit max_mtu based on device's hard_mtu")
capped net->max_mtu to the device's hard_mtu in usbnet_probe(). While
this correctly prevents oversized packets on standard USB network
devices, it breaks the qmi_wwan driver.
qmi_wwan relies on userspace (e.g. ModemManager) setting a large MTU on
the wwan0 interface to configure rx_urb_size via usbnet_change_mtu().
QMI modems negotiate USB transfer sizes of 16,383 or 32,767 bytes, and
the USB receive buffers must be sized accordingly. With max_mtu capped
to hard_mtu (~1500 bytes), userspace can no longer raise the MTU, the
receive buffers remain small, and download speeds drop from >300 Mbps
to ~0.8 Mbps.
Introduce a FLAG_NOMAXMTU driver flag that allows individual usbnet
drivers to opt out of the max_mtu cap. Set this flag in qmi_wwan's
driver_info structures to restore the previous behavior for QMI devices,
while keeping the safety fix in place for all other usbnet drivers.
Fixes: c7159e960f14 ("usbnet: limit max_mtu based on device's hard_mtu")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/CAPh3n803k8JcBPV5qEzUB-oKzWkAs-D5CU7z=Vd_nLRCr5ZqQg@mail.gmail.com/
Reported-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
Tested-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Link: https://patch.msgid.link/20260304134338.1785002-1-lvivier@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
supports
commit ce9e40a9a5e5cff0b1b0d2fa582b3d71a8ce68e8 upstream.
The ITS driver blindly assumes that EventIDs are in abundant supply, to the
point where it never checks how many the hardware actually supports.
It turns out that some pretty esoteric integrations make it so that only a
few bits are available, all the way down to a single bit.
Enforce the advertised limitation at the point of allocating the device
structure, and hope that the endpoint driver can deal with such limitation.
Fixes: 84a6a2e7fc18d ("irqchip: GICv3: ITS: device allocation and configuration")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Zenghui Yu <zenghui.yu@linux.dev>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260206154816.3582887-1-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 28aaa9c39945b7925a1cc1d513c8f21ed38f5e4f upstream.
Guillaume reported crashes via corrupted RCU callback function pointers
during KUnit testing. The crash was traced back to the pidfs rhashtable
conversion which replaced the 24-byte rb_node with an 8-byte rhash_head
in struct pid, shrinking it from 160 to 144 bytes.
struct kthread (without CONFIG_BLK_CGROUP) is also 144 bytes. With
CONFIG_SLAB_MERGE_DEFAULT and SLAB_HWCACHE_ALIGN both round up to
192 bytes and share the same slab cache. struct pid.rcu.func and
struct kthread.affinity_node both sit at offset 0x78.
When a kthread exits via make_task_dead() it bypasses kthread_exit() and
misses the affinity_node cleanup. free_kthread_struct() frees the memory
while the node is still linked into the global kthread_affinity_list. A
subsequent list_del() by another kthread writes through dangling list
pointers into the freed and reused memory, corrupting the pid's
rcu.func pointer.
Instead of patching free_kthread_struct() to handle the missed cleanup,
consolidate all kthread exit paths. Turn kthread_exit() into a macro
that calls do_exit() and add kthread_do_exit() which is called from
do_exit() for any task with PF_KTHREAD set. This guarantees that
kthread-specific cleanup always happens regardless of the exit path -
make_task_dead(), direct do_exit(), or kthread_exit().
Replace __to_kthread() with a new tsk_is_kthread() accessor in the
public header. Export do_exit() since module code using the
kthread_exit() macro now needs it directly.
Reported-by: Guillaume Tucker <gtucker@gtucker.io>
Tested-by: Guillaume Tucker <gtucker@gtucker.io>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: David Gow <davidgow@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/20260224-mittlerweile-besessen-2738831ae7f6@brauner
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 4d13f4304fa4 ("kthread: Implement preferred affinity")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
pagetable_dtor()"
commit 2d28ed588f8d7d0d41b0a4fad7f0d05e4bbf1797 upstream.
This change swapped out mod_node_page_state for lruvec_stat_add_folio.
But, these two APIs are not interchangeable: the lruvec version also
increments memcg stats, in addition to "global" pgdat stats.
So after this change, the "pagetables" memcg stat in memory.stat always
yields "0", which is a userspace visible regression.
I tried to look for a refactor where we add a variant of
lruvec_stat_mod_folio which takes a pgdat and a memcg instead of a folio,
to try to adhere to the spirit of the original patch. But at the end of
the day this just means we have to call folio_memcg(ptdesc_folio(ptdesc))
anyway, which doesn't really accomplish much.
This regression is visible in master as well as 6.18 stable, so CC stable
too.
Link: https://lkml.kernel.org/r/20260225002434.2953895-1-axelrasmussen@google.com
Fixes: f0c92726e89f ("ptdesc: remove references to folios from __pagetable_ctor() and pagetable_dtor()")
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 901084c51a0a8fb42a3f37d2e9c62083c495f824 upstream.
Move claimed and retune control flags out of the bitfield word to
avoid unrelated RMW side effects in asynchronous contexts.
The host->claimed bit shared a word with retune flags. Writes to claimed
in __mmc_claim_host() or retune_now in mmc_mq_queue_rq() can overwrite
other bits when concurrent updates happen in other contexts, triggering
spurious WARN_ON(!host->claimed). Convert claimed, can_retune,
retune_now and retune_paused to bool to remove shared-word coupling.
Fixes: 6c0cedd1ef952 ("mmc: core: Introduce host claiming by context")
Fixes: 1e8e55b67030c ("mmc: block: Add CQE support")
Cc: stable@vger.kernel.org
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Penghe Geng <pgeng@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1015c27a5e1a63efae2b18a9901494474b4d1dc3 upstream.
The usb_control_msg(), usb_bulk_msg(), and usb_interrupt_msg() APIs in
usbcore allow unlimited timeout durations. And since they use
uninterruptible waits, this leaves open the possibility of hanging a
task for an indefinitely long time, with no way to kill it short of
unplugging the target device.
To prevent this sort of problem, enforce a maximum limit on the length
of these unkillable timeouts. The limit chosen here, somewhat
arbitrarily, is 60 seconds. On many systems (although not all) this
is short enough to avoid triggering the kernel's hung-task detector.
In addition, clear up the ambiguity of negative timeout values by
treating them the same as 0, i.e., using the maximum allowed timeout.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/linux-usb/3acfe838-6334-4f6d-be7c-4bb01704b33d@rowland.harvard.edu/
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/15fc9773-a007-47b0-a703-df89a8cf83dd@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 416909962e7cdf29fd01ac523c953f37708df93d upstream.
The synchronous message API in usbcore (usb_control_msg(),
usb_bulk_msg(), and so on) uses uninterruptible waits. However,
drivers may call these routines in the context of a user thread, which
means it ought to be possible to at least kill them.
For this reason, introduce a new usb_bulk_msg_killable() function
which behaves the same as usb_bulk_msg() except for using
wait_for_completion_killable_timeout() instead of
wait_for_completion_timeout(). The same can be done later for
usb_control_msg() later on, if it turns out to be needed.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Suggested-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/linux-usb/3acfe838-6334-4f6d-be7c-4bb01704b33d@rowland.harvard.edu/
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/248628b4-cc83-4e81-a620-3ce4e0376d41@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d9d0be59be2580f2c5e4b7217aafb980e8c371cf ]
Make the different debounce timers configurable from the devicetree.
Depending on the board design, these have to be set different than the
default register values.
Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
Link: https://patch.msgid.link/20251117202215.1936139-2-martijn.de.gouw@prodrive-technologies.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 21b3fb7dc19c ("regulator: pca9450: Correct probed name for PCA9452")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6f1a9140ecda3baba3d945b9a6155af4268aafc4 ]
Tunnel xmit functions (iptunnel_xmit, ip6tunnel_xmit) lack their own
recursion limit. When a bond device in broadcast mode has GRE tap
interfaces as slaves, and those GRE tunnels route back through the
bond, multicast/broadcast traffic triggers infinite recursion between
bond_xmit_broadcast() and ip_tunnel_xmit()/ip6_tnl_xmit(), causing
kernel stack overflow.
The existing XMIT_RECURSION_LIMIT (8) in the no-qdisc path is not
sufficient because tunnel recursion involves route lookups and full IP
output, consuming much more stack per level. Use a lower limit of 4
(IP_TUNNEL_RECURSION_LIMIT) to prevent overflow.
Add recursion detection using dev_xmit_recursion helpers directly in
iptunnel_xmit() and ip6tunnel_xmit() to cover all IPv4/IPv6 tunnel
paths including UDP encapsulated tunnels (VXLAN, Geneve, etc.).
Move dev_xmit_recursion helpers from net/core/dev.h to public header
include/linux/netdevice.h so they can be used by tunnel code.
BUG: KASAN: stack-out-of-bounds in blake2s.constprop.0+0xe7/0x160
Write of size 32 at addr ffff88810033fed0 by task kworker/0:1/11
Workqueue: mld mld_ifc_work
Call Trace:
<TASK>
__build_flow_key.constprop.0 (net/ipv4/route.c:515)
ip_rt_update_pmtu (net/ipv4/route.c:1073)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:84)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
mld_sendpack
mld_ifc_work
process_one_work
worker_thread
</TASK>
Fixes: 745e20f1b626 ("net: add a recursion limit in xmit path")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260306160133.3852900-2-bestswngs@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b824c3e16c1904bf80df489e293d1e3cbf98896d ]
After acquiring netdev_queue::_xmit_lock the number of the CPU owning
the lock is recorded in netdev_queue::xmit_lock_owner. This works as
long as the BH context is not preemptible.
On PREEMPT_RT the softirq context is preemptible and without the
softirq-lock it is possible to have multiple user in __dev_queue_xmit()
submitting a skb on the same CPU. This is fine in general but this means
also that the current CPU is recorded as netdev_queue::xmit_lock_owner.
This in turn leads to the recursion alert and the skb is dropped.
Instead checking the for CPU number, that owns the lock, PREEMPT_RT can
check if the lockowner matches the current task.
Add netif_tx_owned() which returns true if the current context owns the
lock by comparing the provided CPU number with the recorded number. This
resembles the current check by negating the condition (the current check
returns true if the lock is not owned).
On PREEMPT_RT use rt_mutex_owner() to return the lock owner and compare
the current task against it.
Use the new helper in __dev_queue_xmit() and netif_local_xmit_active()
which provides a similar check.
Update comments regarding pairing READ_ONCE().
Reported-by: Bert Karwatzki <spasswolf@web.de>
Closes: https://lore.kernel.org/all/20260216134333.412332-1-spasswolf@web.de
Fixes: 3253cb49cbad4 ("softirq: Allow to drop the softirq-BKL lock on PREEMPT_RT")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reported-by: Bert Karwatzki <spasswolf@web.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260302162631.uGUyIqDT@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 710f5c76580306cdb9ec51fac8fcf6a8faff7821 ]
We have an increasing number of READ_ONCE(xxx->function)
combined with INDIRECT_CALL_[1234]() helpers.
Unfortunately this forces INDIRECT_CALL_[1234]() to read
xxx->function many times, which is not what we wanted.
Fix these macros so that xxx->function value is not reloaded.
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux
add/remove: 0/0 grow/shrink: 1/65 up/down: 122/-1084 (-962)
Function old new delta
ip_push_pending_frames 59 181 +122
ip6_finish_output 687 681 -6
__udp_enqueue_schedule_skb 1078 1072 -6
ioam6_output 2319 2312 -7
xfrm4_rcv_encap_finish2 64 56 -8
xfrm4_output 297 289 -8
vrf_ip_local_out 278 270 -8
vrf_ip6_local_out 278 270 -8
seg6_input_finish 64 56 -8
rpl_output 700 692 -8
ipmr_forward_finish 124 116 -8
ip_forward_finish 143 135 -8
ip6mr_forward2_finish 100 92 -8
ip6_forward_finish 73 65 -8
input_action_end_bpf 1091 1083 -8
dst_input 52 44 -8
__xfrm6_output 801 793 -8
__xfrm4_output 83 75 -8
bpf_input 500 491 -9
__tcp_check_space 530 521 -9
input_action_end_dt6 291 280 -11
vti6_tnl_xmit 1634 1622 -12
bpf_xmit 1203 1191 -12
rpl_input 497 483 -14
rawv6_send_hdrinc 1355 1341 -14
ndisc_send_skb 1030 1016 -14
ipv6_srh_rcv 1377 1363 -14
ip_send_unicast_reply 1253 1239 -14
ip_rcv_finish 226 212 -14
ip6_rcv_finish 300 286 -14
input_action_end_x_core 205 191 -14
input_action_end_x 355 341 -14
input_action_end_t 205 191 -14
input_action_end_dx6_finish 127 113 -14
input_action_end_dx4_finish 373 359 -14
input_action_end_dt4 426 412 -14
input_action_end_core 186 172 -14
input_action_end_b6_encap 292 278 -14
input_action_end_b6 198 184 -14
igmp6_send 1332 1318 -14
ip_sublist_rcv 864 848 -16
ip6_sublist_rcv 1091 1075 -16
ipv6_rpl_srh_rcv 1937 1920 -17
xfrm_policy_queue_process 1246 1228 -18
seg6_output_core 903 885 -18
mld_sendpack 856 836 -20
NF_HOOK 756 736 -20
vti_tunnel_xmit 1447 1426 -21
input_action_end_dx6 664 642 -22
input_action_end 1502 1480 -22
sock_sendmsg_nosec 134 111 -23
ip6mr_forward2 388 364 -24
sock_recvmsg_nosec 134 109 -25
seg6_input_core 836 810 -26
ip_send_skb 172 146 -26
ip_local_out 140 114 -26
ip6_local_out 140 114 -26
__sock_sendmsg 162 136 -26
__ip_queue_xmit 1196 1170 -26
__ip_finish_output 405 379 -26
ipmr_queue_fwd_xmit 373 346 -27
sock_recvmsg 173 145 -28
ip6_xmit 1635 1607 -28
xfrm_output_resume 1418 1389 -29
ip_build_and_send_pkt 625 591 -34
dst_output 504 432 -72
Total: Before=25217686, After=25216724, chg -0.00%
Fixes: 283c16a2dfd3 ("indirect call wrappers: helpers to speed-up indirect calls of builtin")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260227172603.1700433-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9c5a40f2922a5a6d6b42e7b3d4c8e253918c07a1 ]
pinconf_generic_dt_node_to_map_pinmux() is not actually a generic
function, and really belongs in the amlogic-am4 driver. There are three
reasons why.
First, and least, of the reasons is that this function behaves
differently to the other dt_node_to_map functions in a way that is not
obvious from a first glance. This difference stems for the devicetree
properties that the function is intended for use with, and how they are
typically used. The other generic dt_node_to_map functions support
platforms where the pins, groups and functions are described statically
in the driver and require a function that will produce a mapping from dt
nodes to these pre-established descriptions. No other code in the driver
is require to be executed at runtime.
pinconf_generic_dt_node_to_map_pinmux() on the other hand is intended for
use with the pinmux property, where groups and functions are determined
entirely from the devicetree. As a result, there are no statically
defined groups and functions in the driver for this function to perform
a mapping to. Other drivers that use the pinmux property (e.g. the k1)
their dt_node_to_map function creates the groups and functions as the
devicetree is parsed. Instead of that,
pinconf_generic_dt_node_to_map_pinmux() requires that the devicetree is
parsed twice, once by it and once at probe, so that the driver
dynamically creates the groups and functions before the dt_node_to_map
callback is executed. I don't believe this double parsing requirement is
how developers would expect this to work and is not necessary given
there are drivers that do not have this behaviour.
Secondly and thirdly, the function bakes in some assumptions that only
really match the amlogic platform about how the devicetree is constructed.
These, to me, are problematic for something that claims to be generic.
The other dt_node_to_map implementations accept a being called for
either a node containing pin configuration properties or a node
containing child nodes that each contain the configuration properties.
IOW, they support the following two devicetree configurations:
| cfg {
| label: group {
| pinmux = <asjhdasjhlajskd>;
| config-item1;
| };
| };
| label: cfg {
| group1 {
| pinmux = <dsjhlfka>;
| config-item2;
| };
| group2 {
| pinmux = <lsdjhaf>;
| config-item1;
| };
| };
pinconf_generic_dt_node_to_map_pinmux() only supports the latter.
The other assumption about devicetree configuration that the function
makes is that the labeled node's parent is a "function node". The amlogic
driver uses these "function nodes" to create the functions at probe
time, and pinconf_generic_dt_node_to_map_pinmux() finds the parent of
the node it is operating on's name as part of the mapping. IOW, it
requires that the devicetree look like:
| pinctrl@bla {
|
| func-foo {
| label: group-default {
| pinmuxes = <lskdf>;
| };
| };
| };
and couldn't be used if the nodes containing the pinmux and
configuration properties are children of the pinctrl node itself:
| pinctrl@bla {
|
| label: group-default {
| pinmuxes = <lskdf>;
| };
| };
These final two reasons are mainly why I believe this is not suitable as
a generic function, and should be moved into the driver that is the sole
user and originator of the "generic" function.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Stable-dep-of: a2539b92e4b7 ("pinctrl: meson: amlogic-a4: Fix device node reference leak in aml_dt_node_to_map_pinmux()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 14eb64db8ff07b58a35b98375f446d9e20765674 upstream.
The dwmac databook for v3.74a states that lpi_intr_o is a sideband
signal which should be used to ungate the application clock, and this
signal is synchronous to the receive clock. The receive clock can run
at 2.5, 25 or 125MHz depending on the media speed, and can stop under
the control of the link partner. This means that the time it takes to
clear is dependent on the negotiated media speed, and thus can be 8,
40, or 400ns after reading the LPI control and status register.
It has been observed with some aggressive link partners, this clock
can stop while lpi_intr_o is still asserted, meaning that the signal
remains asserted for an indefinite period that the local system has
no direct control over.
The LPI interrupts will still be signalled through the main interrupt
path in any case, and this path is not dependent on the receive clock.
This, since we do not gate the application clock, and the chances of
adding clock gating in the future are slim due to the clocks being
ill-defined, lpi_intr_o serves no useful purpose. Remove the code which
requests the interrupt, and all associated code.
Reported-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Tested-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com> # Renesas RZ/V2H board
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vnJbt-00000007YYN-28nm@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e39bb9e02b68942f8e9359d2a3efe7d37ae6be0e upstream.
When a process forks, the child process copies the parent's VMAs but the
user_mapped reference count is not incremented. As a result, when both the
parent and child processes exit, tracing_buffers_mmap_close() is called
twice. On the second call, user_mapped is already 0, causing the function to
return -ENODEV and triggering a WARN_ON.
Normally, this isn't an issue as the memory is mapped with VM_DONTCOPY set.
But this is only a hint, and the application can call
madvise(MADVISE_DOFORK) which resets the VM_DONTCOPY flag. When the
application does that, it can trigger this issue on fork.
Fix it by incrementing the user_mapped reference count without re-mapping
the pages in the VMA's open callback.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://patch.msgid.link/20260227025842.1085206-1-wangqing7171@gmail.com
Fixes: cf9f0f7c4c5bb ("tracing: Allow user-space mapping of the ring-buffer")
Reported-by: syzbot+3b5dd2030fe08afdf65d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3b5dd2030fe08afdf65d
Tested-by: syzbot+3b5dd2030fe08afdf65d@syzkaller.appspotmail.com
Signed-off-by: Qing Wang <wangqing7171@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
