| Age | Commit message (Collapse) | Author |
|---|
|
[ Upstream commit f19590b07cb620be1fcd5474c49515e21a05d406 ]
Netfilter code (net/netfilter/nft_log.c and net/netfilter/xt_AUDIT.c)
have to be kept in sync. Both source files had duplicated versions of
audit_ip4() and audit_ip6() functions, which can result in lack of
consistency and/or duplicated work.
This patch adds a helper function in audit.c that can be called by
netfilter code commonly, aiming to improve maintainability and
consistency.
Suggested-by: Florian Westphal <fw@strlen.de>
Suggested-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Ricardo Robaina <rrobaina@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Stable-dep-of: 65dfde57d1e2 ("audit: fix potential integer overflow in audit_log_n_hex()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 6a8f359c3132e4f51bdb263ad74ec632c65e55fd ]
All platforms that provide a teardown callback return 0. New users are
supposed to not make use of platform support, so there is no
functionality lost.
This patch is a preparation for making i2c remove callbacks return void.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Stable-dep-of: 1f0bdc2884b6 ("usb: typec: ucsi: ccg: Fix use-after-free of ucsi on remove")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5e0ae59159e3a07391a35865bb79ff335473fa79 ]
Introduce haptic usages as defined in HID Usage Tables specification.
Add HID units for newton and gram.
Signed-off-by: Angela Czubak <aczubak@google.com>
Co-developed-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Stable-dep-of: 8813b0612275 ("HID: multitouch: fix out-of-bounds bit access on mt_io_flags")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 337b1b566db087347194e4543ddfdfa5645275cc ]
BAR resize operation is implemented in the pci_resize_resource() and
pbus_reassign_bridge_resources() functions. pci_resize_resource() can be
called either from __resource_resize_store() from sysfs or directly by the
driver for the Endpoint Device.
The pci_resize_resource() requires that caller has released the device
resources that share the bridge window with the BAR to be resized as
otherwise the bridge window is pinned in place and cannot be changed.
pbus_reassign_bridge_resources() rolls back resources if the resize
operation fails, but rollback is performed only for the bridge windows.
Because releasing the device resources are done by the caller of the BAR
resize interface, these functions performing the BAR resize do not have
access to the device resources as they were before the resize.
pbus_reassign_bridge_resources() could try __pci_bridge_assign_resources()
after rolling back the bridge windows as they were, however, it will not
guarantee the resource are assigned due to differences in how FW and the
kernel assign the resources (alignment of the start address and tail).
To perform rollback robustly, the BAR resize interface has to be altered to
also release the device resources that share the bridge window with the BAR
to be resized.
Also, remove restoring from the entries failed list as saved list should
now contain both the bridge windows and device resources so the extra
restore is duplicated work.
Some drivers (currently only amdgpu) want to prevent releasing some
resources. Add exclude_bars param to pci_resize_resource() and make amdgpu
pass its register BAR (BAR 2 or 5), which should never be released during
resize operation. Normally 64-bit prefetchable resources do not share a
bridge window with the 32-bit only register BAR, but there are various
fallbacks in the resource assignment logic which may make the resources
share the bridge window in rare cases.
This change (together with the driver side changes) is to counter the
resource releases that had to be done to prevent resource tree corruption
in the ("PCI: Release assigned resource before restoring them") change. As
such, it likely restores functionality in cases where device resources were
released to avoid resource tree conflicts which appeared to be "working"
when such conflicts were not correctly detected by the kernel.
Reported-by: Simon Richter <Simon.Richter@hogyros.de>
Link: https://lore.kernel.org/linux-pci/f9a8c975-f5d3-4dd2-988e-4371a1433a60@hogyros.de/
Reported-by: Alex Bennée <alex.bennee@linaro.org>
Link: https://lore.kernel.org/linux-pci/874irqop6b.fsf@draig.linaro.org/
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
[bhelgaas: squash amdgpu BAR selection from
https: //lore.kernel.org/r/20251114103053.13778-1-ilpo.jarvinen@linux.intel.com]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org> # AVA, AMD GPU
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20251113162628.5946-7-ilpo.jarvinen@linux.intel.com
Stable-dep-of: ee7471fe968d ("PCI: Skip Resizable BAR restore on read error")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 7d8296b250f2eed73f1758607926d4d258dea5d4 ]
Avoid open-coding that simple expression each time by moving
BYTES_TO_BITS() from the probes code to <linux/bitops.h> to export
it to the rest of the kernel.
Simplify the macro while at it. `BITS_PER_LONG / sizeof(long)` always
equals to %BITS_PER_BYTE, regardless of the target architecture.
Do the same for the tools ecosystem as well (incl. its version of
bitops.h). The previous implementation had its implicit type of long,
while the new one is int, so adjust the format literal accordingly in
the perf code.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 55052184ac90 ("iio: common: st_sensors: honour channel endianness in read_axis_data")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit bf8367b00c33c64a9391c262bb2e11d274c9f2a4 ]
When a sensor is running and there is a FIFO frequency change due to
another sensor turned on/off, there are glitches on timestamp. Fix that
by using only interrupt timestamp when there is the corresponding sensor
data in the FIFO.
Delete FIFO period handling and simplify internal functions.
Update integration inside inv_mpu6050 and inv_icm42600 drivers.
Fixes: 0ecc363ccea7 ("iio: make invensense timestamp module generic")
Cc: Stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240426094835.138389-1-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: affe3f077d7a ("iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0ecc363ccea71eda6a2cceade120489259bcdb33 ]
Rename common module to inv_sensors_timestamp, add configuration
at init (chip internal clock, acceptable jitter, ...) and update
inv_icm42600 driver integration.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230606162147.79667-4-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: affe3f077d7a ("iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d99ff463ecf651437e9e4abe68f331dfb6b5bd9d ]
Create new inv_sensors common modules and move inv_icm42600
timestamp module inside. This module will be used by IMUs and
also in the future by other chips.
Modify inv_icm42600 driver to use timestamp module and do some
headers cleanup.
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20230606162147.79667-3-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: affe3f077d7a ("iio: imu: inv_icm42600: fix timestamping by limiting FIFO reading")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e1d9a90a9bfdb0735062d3adb16b07314b4b7b01 ]
Adding support for processing of MAPv5 downlink packets.
It involves parsing the Mapv5 packet and checking the csum header
to know whether the hardware has validated the checksum and is
valid or not.
Based on the checksum valid bit the corresponding stats are
incremented and skb->ip_summed is marked either CHECKSUM_UNNECESSARY
or left as CHEKSUM_NONE to let network stack revalidate the checksum
and update the respective snmp stats.
Current MAPV1 header has been modified, the reserved field in the
Mapv1 header is now used for next header indication.
Signed-off-by: Sharath Chandra Vurukala <sharathv@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: f0f1887a9e30 ("net: qualcomm: rmnet: validate MAP frame length before ingress parsing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 86ca860e12ec0feab7d721d3b05e60fb86613540 ]
Replace the use of C bit-fields in the rmnet_map_ul_csum_header
structure with a single two-byte (big endian) structure member,
and use masks to encode or get values within it. The content of
these fields can be accessed using simple bitwise AND and OR
operations on the (host byte order) value of the new structure
member.
Previously rmnet_map_ipv4_ul_csum_header() would update C bit-field
values in host byte order, then forcibly fix their byte order using
a combination of byte swap operations and types.
Instead, just compute the value that needs to go into the new
structure member and save it with a simple byte-order conversion.
Make similar simplifications in rmnet_map_ipv6_ul_csum_header().
Finally, in rmnet_map_checksum_uplink_packet() a set of assignments
zeroes every field in the upload checksum header. Replace that with
a single memset() operation.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: f0f1887a9e30 ("net: qualcomm: rmnet: validate MAP frame length before ingress parsing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 16653c16d282e768763b2e8cc78f75df8fd53992 ]
The actual layout of bits defined in C bit-fields (e.g. int foo : 3)
is implementation-defined. Structures defined in <linux/if_rmnet.h>
address this by specifying all bit-fields twice, to cover two
possible layouts.
I think this pattern is repetitive and noisy, and I find the whole
notion of compiler "bitfield endianness" to be non-intuitive.
Stop using C bit-fields for the command/data flag and the pad length
fields in the rmnet_map structure, and define a single-byte flags
field instead. Define a mask for the single-bit "command" flag,
and another mask for the encoded pad length. The content of both
fields can be accessed using a simple bitwise AND operation.
Signed-off-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: f0f1887a9e30 ("net: qualcomm: rmnet: validate MAP frame length before ingress parsing")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e9506871a8ea304cde48ff4a57226df2aadddae3 ]
dev_has_sync_state() reads dev->driver twice without holding
device_lock() -- once for the NULL check and once to dereference
->sync_state. Some callers only hold device_links_write_lock, which
doesn't prevent a concurrent unbind from clearing dev->driver via
device_unbind_cleanup().
Fix it by reading dev->driver exactly once with READ_ONCE(), pairing
with the WRITE_ONCE() in device_set_driver().
Link: https://lore.kernel.org/driver-core/DHW8QPU1VU1F.3P6PH69HLFBYC@kernel.org/
Fixes: ac338acf514e ("driver core: Add dev_has_sync_state()")
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Saravana Kannan <saravanak@kernel.org>
Link: https://patch.msgid.link/20260418162221.1121873-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 0a6070839b1ef276d5b05bedfb787743e140fb17 upstream.
String event fields are not necessarily NUL-terminated, so the filter
predicate functions (filter_pred_string(), filter_pred_strloc() and
filter_pred_strrelloc()) pass the field length to the regex match
callbacks, and the length-aware matchers honour it.
regex_match_glob() was the exception: it ignored the length and called
glob_match(), which scans the string until it hits a NUL byte. Some
string fields are not NUL-terminated. One example is the dynamic char
array of the xfs_* namespace tracepoints, which is copied without a
trailing NUL. For such a field, glob matching reads past the end of
the event field, causing a KASAN slab-out-of-bounds read in
glob_match(), reached via regex_match_glob() and filter_match_preds()
from the xfs_lookup tracepoint.
Add a length-bounded glob_match_len() and use it from regex_match_glob()
so glob matching always stops at the field boundary. The matching loop
is factored into a shared helper so glob_match() keeps its behaviour.
Fixes: 60f1d5e3bac4 ("ftrace: Support full glob matching")
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/da1aaf125fc3b63320b0c540fd6afa7c3d5b4f1a.1782836943.git.hhhuang@smu.edu.sg
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Assisted-by: Codex:GPT-5.4
Signed-off-by: Huihui Huang <hhhuang@smu.edu.sg>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f784fcea450617055d2d12eec5b2f6e0e38bf878 upstream.
sensor_hub_input_attr_get_raw_value() is limited to returning a single
32-bit value, which is insufficient for sensors that report data larger
than 32 bits, such as a quaternion with four s16 elements.
Add sensor_hub_input_attr_read_values() that accepts a caller-provided
buffer and accumulates incoming data until the buffer is full. The two
paths are distinguished in sensor_hub_raw_event() by pending.max_raw_size
being non-zero, preserving backward compatibility.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Co-developed-by: Zhang Lixu <lixu.zhang@intel.com>
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 406e8a651a7b854c41fecd5117bb282b3a6c2c6b ]
The sk_msg sg.copy bitmap is part of the scatterlist entry ownership
state. A set bit tells sk_msg_compute_data_pointers() not to expose the
entry through writable BPF ctx->data. This protects entries backed by
pages that are not private to the sk_msg, such as splice-backed file
page-cache pages.
Several sk_msg transform paths move, copy, split, or compact
msg->sg.data[] entries without moving the matching sg.copy bit. This can
make an externally backed entry arrive at a new slot with a clear copy
bit. A later SK_MSG verdict can then expose sg_virt(sge) as writable
ctx->data and BPF stores can modify the original page cache.
Keep sg.copy synchronized with sg.data[] whenever entries are
transferred, shifted, split, or copied into a new sk_msg. Clear the bit
when an entry is replaced by a newly allocated private page or freed.
This covers the BPF pull/push/pop helpers, sk_msg_shift_left/right(),
sk_msg_xfer(), and tls_split_open_record(), including the partial tail
entry created during TLS open-record splitting.
Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling")
Cc: stable@vger.kernel.org
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Reported-by: Keenan Dong <keenanat2000@gmail.com>
Signed-off-by: Yiming Qian <yimingqian591@gmail.com>
Link: https://patch.msgid.link/20260610062137.49075-1-yimingqian591@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5a8fb33e530512ee67a11b30f3451a4f030f4b01 ]
We have plans for increasing MAX_SKB_FRAGS, but sk_msg_sg::copy
is currently an unsigned long, limiting MAX_SKB_FRAGS to 30 on 32bit arches.
Convert it to a bitmap, as Jakub suggested.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 406e8a651a7b ("net: skmsg: preserve sg.copy across SG transforms")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 119a5d573622ae90ba730d18acfae9bb75d77b9a ]
When the ring buffer was first introduced, reading the non-consuming
"trace" file required disabling the writing of the ring buffer. To make
sure the writing was fully disabled before iterating the buffer with a
non-consuming read, it would set the disable flag of the buffer and then
call an RCU synchronization to make sure all the buffers were
synchronized.
The function ring_buffer_read_start() originally would initialize the
iterator and call an RCU synchronization, but this was for each individual
per CPU buffer where this would get called many times on a machine with
many CPUs before the trace file could be read. The commit 72c9ddfd4c5bf
("ring-buffer: Make non-consuming read less expensive with lots of cpus.")
separated ring_buffer_read_start into ring_buffer_read_prepare(),
ring_buffer_read_sync() and then ring_buffer_read_start() to allow each of
the per CPU buffers to be prepared, call the read_buffer_read_sync() once,
and then the ring_buffer_read_start() for each of the CPUs which made
things much faster.
The commit 1039221cc278 ("ring-buffer: Do not disable recording when there
is an iterator") removed the requirement of disabling the recording of the
ring buffer in order to iterate it, but it did not remove the
synchronization that was happening that was required to wait for all the
buffers to have no more writers. It's now OK for the buffers to have
writers and no synchronization is needed.
Remove the synchronization and put back the interface for the ring buffer
iterator back before commit 72c9ddfd4c5bf was applied.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250630180440.3eabb514@batman.local.home
Reported-by: David Howells <dhowells@redhat.com>
Fixes: 1039221cc278 ("ring-buffer: Do not disable recording when there is an iterator")
Tested-by: David Howells <dhowells@redhat.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Assisted-by: Kiro:claude-opus-4.8
[doebel@amazon.de: move patch section using guard() macro into a
separate block to address declaration after statement warning.]
Signed-off-by: Bjoern Doebel <doebel@amazon.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 13e00fdc9236bd4d0bff4109d2983171fbcb74c4 ]
This variant of skb_header_pointer() should be used in contexts
where @offset argument is user-controlled and could be negative.
Negative offsets are supported, as long as the zone starts
between skb->head and skb->data.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260128141539.3404400-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Adjust context ]
Signed-off-by: Bin Lan <lanbincn@139.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Shivani: Modified to apply on 5.10.y ]
Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit de4eda9de2d957ef2d6a8365a01e26a435e958cb ]
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Stable-dep-of: a4f0b001782b ("vsock/virtio: reset connection on receiving queue overflow")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d134feeb5df33fbf77f482f52a366a44642dba09 ]
Add print_hex_dump_devel() as the hex dump equivalent of pr_devel(),
which emits output only when DEBUG is enabled, but keeps call sites
compiled otherwise.
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: 177730a273b1 ("crypto: caam - guard HMAC key hex dumps in hash_digest_key")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 175db11786bde9061db526bf1ac5107d915f5163 upstream.
Clang recently added support for -Wattribute-alias [1], which results in
the same warnings that necessitated commit bee20031772a ("disable
-Wattribute-alias warning for SYSCALL_DEFINEx()") for GCC.
kernel/time/itimer.c:325:1: error: alias and aliasee have different types 'long (unsigned int)' and 'long (typeof (__builtin_choose_expr((__builtin_types_compatible_p(typeof ((unsigned int)0), typeof (0LL)) || __builtin_types_compatible_p(typeof ((unsigned int)0), typeof (0ULL))), 0LL, 0L)))' (aka 'long (long)') [-Werror,-Wattribute-alias]
325 | SYSCALL_DEFINE1(alarm, unsigned int, seconds)
| ^
include/linux/syscalls.h:225:36: note: expanded from macro 'SYSCALL_DEFINE1'
225 | #define SYSCALL_DEFINE1(name, ...) SYSCALL_DEFINEx(1, _##name, __VA_ARGS__)
| ^
include/linux/syscalls.h:236:2: note: expanded from macro 'SYSCALL_DEFINEx'
236 | __SYSCALL_DEFINEx(x, sname, __VA_ARGS__)
| ^
include/linux/syscalls.h:251:18: note: expanded from macro '__SYSCALL_DEFINEx'
251 | __attribute__((alias(__stringify(__se_sys##name)))); \
| ^
kernel/time/itimer.c:325:1: note: aliasee is declared here
include/linux/syscalls.h:225:36: note: expanded from macro 'SYSCALL_DEFINE1'
225 | #define SYSCALL_DEFINE1(name, ...) SYSCALL_DEFINEx(1, _##name, __VA_ARGS__)
| ^
include/linux/syscalls.h:236:2: note: expanded from macro 'SYSCALL_DEFINEx'
236 | __SYSCALL_DEFINEx(x, sname, __VA_ARGS__)
| ^
include/linux/syscalls.h:255:18: note: expanded from macro '__SYSCALL_DEFINEx'
255 | asmlinkage long __se_sys##name(__MAP(x,__SC_LONG,__VA_ARGS__)) \
| ^
<scratch space>:16:1: note: expanded from here
16 | __se_sys_alarm
| ^
Disable the warnings in the same way for clang-23 and newer. Disable the
warning about unknown warning options to avoid breaking the build for
versions of clang-23 that do not have -Wattribute-alias, such as ones
deployed by vendors like Android or CI systems or when bisecting LLVM
between llvmorg-23-init and release/23.x.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2163
Link: https://github.com/llvm/llvm-project/commit/40da6920a0d71d49dfa2392b09153600b0759f5e [1]
Link: https://patch.msgid.link/20260515-syscall-disable-attribute-alias-for-clang-v1-1-9a9d95d41df6@kernel.org
[nathan: Drop arch/riscv hunk in older trees and address conflicts]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit f014a00bbeb09cea16017b82448d32a468a6b96f upstream.
Add __diag macros similar to those in compiler-gcc.h, so that warnings
that need to be adjusted for specific cases but not globally can be
ignored when building with clang.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220304224645.3677453-6-memxor@gmail.com
[ Kartikeya: wrote commit message ]
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2c85c61d1332e1e16f020d76951baf167dcb6f7a ]
commit 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing
bogus memset()") enforced the provided data to be at least the size of
the declared buffer in the report descriptor to prevent a buffer
overflow. However, we can try to be smarter by providing both the buffer
size and the data size, meaning that hid_report_raw_event() can make
better decision whether we should plaining reject the buffer (buffer
overflow attempt) or if we can safely memset it to 0 and pass it to the
rest of the stack.
Fixes: 0a3fe972a7cb ("HID: core: Mitigate potential OOB by removing bogus memset()")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Stable-dep-of: 206342541fc8 ("HID: core: introduce hid_safe_input_report()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
(cherry picked from commit 509c2605065004fc4cd86ee50a9350d402785307)
[Lee: Backported to linux-6.12.y and beyond]
Signed-off-by: Lee Jones <lee@kernel.org>
(cherry picked from commit f9393998660f146970047bda31526aeb96190f28)
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1d64624243af8329b4b219d8c39e28ea448f9929 ]
hid_warn_ratelimited() is needed. Add the others as part of the block.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 4c9ad387aa2d6785299722e54224d34764edaeb3 upstream.
gcc-16 has gained some more advanced inter-procedual optimization
techniques that enable it to inline the dummy_tlb_add_page() and
dummy_tlb_flush() function pointers into a specialized version of
__arm_v7s_unmap:
WARNING: modpost: vmlinux: section mismatch in reference: __arm_v7s_unmap+0x2cc (section: .text) -> dummy_tlb_add_page (section: .init.text)
ERROR: modpost: Section mismatches detected.
>From what I can tell, the transformation is correct, as this is only
called when __arm_v7s_unmap() is called from arm_v7s_do_selftests(),
which is also __init. Since __arm_v7s_unmap() however is not __init,
gcc cannot inline the inner function calls directly.
In debug_objects_selftest(), the same thing happens. Both the
caller and the leaf function are __init, but the IPA pulls
it into a non-init one:
WARNING: modpost: vmlinux: section mismatch in reference: lookup_object_or_alloc+0x7c (section: .text.lookup_object_or_alloc) -> is_static_object (section: .init.text)
Marking the affected functions as not "__init" would reliably avoid this
issue but is not a good solution because it removes an otherwise correct
annotation. I tried marking the functions as 'noinline', but that ended
up not covering all the affected configurations.
With some more experimenting, I found that marking these functions as
__attribute__((noipa)) is both logical and reliable.
In order to keep the syntax readable, add a custom macro for this in
include/linux/compiler_attributes.h next to other related macros and
use it to annotate both files.
Link: https://lore.kernel.org/all/abRB6g-48ZX6Yl2r@willie-the-truck/
Cc: Will Deacon <will@kernel.org>
Cc: Thomas Gleixner <tglx@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: linux-kbuild@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ef15ccbb3e8640a723c42ad90eaf81d66ae02017 upstream.
The parport subsystem registers port devices before they are fully
initialised, resulting in a race condition where client drivers such
as lp can attach to ports that are not completely initialised or even
being torn down.
When the port and client drivers are built as modules and loaded
around the same time during boot, this occasionally results in a
crash. I was able to make this happen reliably in a VM with a
PC-style parallel port by patching parport_pc to fail probing:
> --- a/drivers/parport/parport_pc.c
> +++ b/drivers/parport/parport_pc.c
> @@ -2069,7 +2069,7 @@ static struct parport *__parport_pc_probe_port(unsigned long int base,
> if (!p)
> goto out3;
>
> - base_res = request_region(base, 3, p->name);
> + base_res = NULL;
> if (!base_res)
> goto out4;
>
and then running:
while true; do
modprobe lp & modprobe parport_pc
wait
rmmod lp parport_pc
done
for a few seconds.
In the long term I think port registration should be changed to put
the call to device_add() inside parport_announce_port(), but since the
latter currently cannot fail this will require changing all port
drivers.
For now, add a flag to indicate whether a port has been "announced"
and only try to attach client drivers to ports when the flag is set.
Fixes: 6fa45a226897 ("parport: add device-model to parport subsystem")
Closes: https://bugs.debian.org/1130365
Closes: https://lore.kernel.org/all/6ba903ad-9897-42bb-8c2d-337385cc3746@molgen.mpg.de/
Cc: stable <stable@kernel.org>
Signed-off-by: Ben Hutchings <benh@debian.org>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://patch.msgid.link/afo6uBv68GDevbMD@decadent.org.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 3942bb49728ad9e1f94d953a88af169a8f5d8099 ]
Almost two thirds of the memchr_inv() usages check if the memory area is
all zeros, with no interest in where in the buffer the first non-zero
byte is located. Checking for !memchr_inv(s, 0, n) is also not very
intuitive or discoverable. Add an explicit mem_is_zero() helper for this
use case.
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240814100035.3100852-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Stable-dep-of: 3e6ccd790ed6 ("gpio: cdev: check if uAPI v2 config attributes are correctly zeroed")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0898a817621a2f0cddca8122d9b974003fe5036d ]
The cdrom core never calls set_disk_ro() for a registered device, so
BLKROGET on a CD-ROM device always returns 0 (writable), even when the
drive has no write capabilities and writes will inevitably fail. This
causes problems for userspace that relies on BLKROGET to determine
whether a block device is read-only. For example, systemd's loop device
setup uses BLKROGET to decide whether to create a loop device with
LO_FLAGS_READ_ONLY. Without the read-only flag, writes pass through the
loop device to the CD-ROM and fail with I/O errors. systemd-fsck
similarly checks BLKROGET to decide whether to run fsck in no-repair
mode (-n).
The write-capability bits in cdi->mask come from two different sources:
CDC_DVD_RAM and CDC_CD_RW are populated by the driver from the MODE
SENSE capabilities page (page 0x2A) before register_cdrom() is called,
while CDC_MRW_W and CDC_RAM require the MMC GET CONFIGURATION command
and were only probed by cdrom_open_write() at device open time. This
meant that any attempt to compute the writable state from the full
mask at probe time was incorrect, because the GET CONFIGURATION bits
were still unset (and cdi->mask is initialized such that capabilities
are assumed present).
Fix this by factoring the GET CONFIGURATION probing out of
cdrom_open_write() into a new exported helper,
cdrom_probe_write_features(), and having sr call it from sr_probe()
right after get_capabilities() has populated the MODE SENSE bits.
register_cdrom() then calls set_disk_ro() based on the full
write-capability mask (CDC_DVD_RAM | CDC_MRW_W | CDC_RAM | CDC_CD_RW)
so the block layer reflects the drive's actual write support. The
feature queries used (CDF_MRW and CDF_RWRT via GET CONFIGURATION with
RT=00) report drive-level capabilities that are persistent across
media, so a single probe before register_cdrom() is sufficient and the
redundant probe at open time is dropped.
With set_disk_ro() now accurate, the long-vestigial cd->writeable flag
in sr can go: get_capabilities() used to set cd->writeable based on
the same four mask bits, but because CDC_MRW_W and CDC_RAM default to
"capability present" in cdi->mask and aren't touched by MODE SENSE,
the condition that gated cd->writeable was always true, making it
unconditionally 1. Replace the corresponding gate in sr_init_command()
with get_disk_ro(cd->disk), which turns a previously no-op check into
a real one and also catches kernel-internal bio writers that bypass
blkdev_write_iter()'s bdev_read_only() check.
The sd driver (SCSI disks) does not have this problem because it
checks the MODE SENSE Write Protect bit and calls set_disk_ro()
accordingly. The sr driver cannot use the same approach because the
MMC specification does not define the WP bit in the MODE SENSE
device-specific parameter byte for CD-ROM devices.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Daan De Meyer <daan@amutable.com>
Reviewed-by: Phillip Potter <phil@philpotter.co.uk>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://patch.msgid.link/20260427210139.1400-2-phil@philpotter.co.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7ae41220ef5831674f446baef19bfe1b31358260 ]
Introduce a bitfield to allow the drivers to announce the available
features for an RTC.
The main use case would be to better handle alarms, that could be present
or not or have a minute resolution or may need a correct week day to be set.
Use the newly introduced RTC_FEATURE_ALARM bit to then test whether alarms
are available instead of relying on the presence of ops->set_alarm.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210110231752.1418816-2-alexandre.belloni@bootlin.com
Stable-dep-of: 0fedce7244e4 ("rtc: abx80x: Disable alarm feature if no interrupt attached")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cc1ff87bce1ccd38410ab10960f576dcd17db679 ]
RFC 2516 Section 7 states that Protocol Field Compression (PFC) is NOT
RECOMMENDED for PPPoE. In practice, pppd does not support negotiating
PFC for PPPoE sessions, and the current PPPoE driver assumes an
uncompressed (2-byte) protocol field. However, the generic PPP layer
function ppp_input() is not aware of the negotiation result, and still
accepts PFC frames.
If a peer with a broken implementation or an attacker sends a frame with
a compressed (1-byte) protocol field, the subsequent PPP payload is
shifted by one byte. This causes the network header to be 4-byte
misaligned, which may trigger unaligned access exceptions on some
architectures.
To reduce the attack surface, drop PPPoE PFC frames. Introduce
ppp_skb_is_compressed_proto() helper function to be used in both
ppp_generic.c and pppoe.c to avoid open-coding.
Fixes: 7fb1b8ca8fa1 ("ppp: Move PFC decompression to PPP generic layer")
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260415022456.141758-2-qingfang.deng@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 46126db9c86110e5fc1e369b9bb89735ddefdae4 ]
Allow to dissect PPPoE specific fields which are:
- session ID (16 bits)
- ppp protocol (16 bits)
- type (16 bits) - this is PPPoE ethertype, for now only
ETH_P_PPP_SES is supported, possible ETH_P_PPP_DISC
in the future
The goal is to make the following TC command possible:
# tc filter add dev ens6f0 ingress prio 1 protocol ppp_ses \
flower \
pppoe_sid 12 \
ppp_proto ip \
action drop
Note that only PPPoE Session is supported.
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: cc1ff87bce1c ("pppoe: drop PFC frames")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 36776b7f8a8955b4e75b5d490a75fee0c7a2a7ef ]
print_hex_dump_bytes() claims to be a simple wrapper around
print_hex_dump(), but it actally calls print_hex_dump_debug(), which
means no output is printed if (dynamic) DEBUG is disabled.
Update the documentation to match the implementation.
Fixes: 091cb0994edd20d6 ("lib/hexdump: make print_hex_dump_bytes() a nop on !DEBUG builds")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://patch.msgid.link/3d5c3069fd9102ecaf81d044b750cd613eb72a08.1774970392.git.geert+renesas@glider.be
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dbbe7eaf0e4795bf003ac06872aaf52b6b6b1310 ]
This is similar to dev_err_probe() but for cases where an ERR_PTR() or
ERR_CAST() is to be returned simplifying patterns like:
dev_err_probe(dev, ret, ...);
return ERR_PTR(ret)
or
dev_err_probe(dev, PTR_ERR(ptr), ...);
return ERR_CAST(ptr)
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240606-dev-add_dev_errp_probe-v3-1-51bb229edd79@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Stable-dep-of: 797cc011ae02 ("backlight: sky81452-backlight: Check return value of devm_gpiod_get_optional() in sky81452_bl_parse_dt()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9e0cace7a6254070159ebd86497eadc29ea307ca ]
dev_err_probe() belongs to the printing API, hence
move the definition from device.h to dev_printk.h.
There is no change to the callers at all, since:
1) implementation is located in the same core.c;
2) dev_printk.h is guaranteed to be included by device.h.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20230721131309.16821-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 797cc011ae02 ("backlight: sky81452-backlight: Check return value of devm_gpiod_get_optional() in sky81452_bl_parse_dt()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f43243c66e5e9ad839d235f82a58e73a7e7612af ]
The kernel coding style does not require 'extern' in function prototypes
in .h files, so remove them from include/linux/device.h as they are not
needed.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20230324122711.2664537-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 797cc011ae02 ("backlight: sky81452-backlight: Check return value of devm_gpiod_get_optional() in sky81452_bl_parse_dt()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e93ab401da4b2e2c1b8ef2424de2f238d51c8b2d ]
dquot_scan_active() can race with quota deactivation in
quota_release_workfn() like:
CPU0 (quota_release_workfn) CPU1 (dquot_scan_active)
============================== ==============================
spin_lock(&dq_list_lock);
list_replace_init(
&releasing_dquots, &rls_head);
/* dquot X on rls_head,
dq_count == 0,
DQ_ACTIVE_B still set */
spin_unlock(&dq_list_lock);
synchronize_srcu(&dquot_srcu);
spin_lock(&dq_list_lock);
list_for_each_entry(dquot,
&inuse_list, dq_inuse) {
/* finds dquot X */
dquot_active(X) -> true
atomic_inc(&X->dq_count);
}
spin_unlock(&dq_list_lock);
spin_lock(&dq_list_lock);
dquot = list_first_entry(&rls_head);
WARN_ON_ONCE(atomic_read(&dquot->dq_count));
The problem is not only a cosmetic one as under memory pressure the
caller of dquot_scan_active() can end up working on freed dquot.
Fix the problem by making sure the dquot is removed from releasing list
when we acquire a reference to it.
Fixes: 869b6ea1609f ("quota: Fix slow quotaoff")
Reported-by: Sam Sun <samsun1006219@gmail.com>
Link: https://lore.kernel.org/all/CAEkJfYPTt3uP1vAYnQ5V2ZWn5O9PLhhGi5HbOcAzyP9vbXyjeg@mail.gmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c064abc68e009d2cc18416e7132d9c25e03125b6 ]
The entries later in enum dmi_entry_type don't match the SMBIOS
specification¹.
The entry for type 33: `64-Bit Memory Error Information` is not present and
thus the index for all later entries is incorrect.
Add it.
Also, add missing entry types 43-46, while at it.
¹ Search for "System Management BIOS (SMBIOS) Reference Specification"
[ bp: Drop the flaky SMBIOS spec URL. ]
Fixes: 93c890dbe5287 ("firmware: Add DMI entry types to the headers")
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://patch.msgid.link/20260307141024.819807-2-superm1@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 756a0e011cfca0b45a48464aa25b05d9a9c2fb0b ]
Architecture support for rwlocks must be available whether or not
CONFIG_DEBUG_SPINLOCK has been defined. Move the definitions of the
arch_{read,write}_{lock,trylock,unlock}() macros such that these become
visbile if CONFIG_DEBUG_SPINLOCK=n.
This patch prepares for converting do_raw_{read,write}_trylock() into
inline functions. Without this patch that conversion triggers a build
failure for UP architectures, e.g. arm-ep93xx. I used the following
kernel configuration to build the kernel for that architecture:
CONFIG_ARCH_MULTIPLATFORM=y
CONFIG_ARCH_MULTI_V7=n
CONFIG_ATAGS=y
CONFIG_MMU=y
CONFIG_ARCH_MULTI_V4T=y
CONFIG_CPU_LITTLE_ENDIAN=y
CONFIG_ARCH_EP93XX=y
Fixes: fb1c8f93d869 ("[PATCH] spinlock consolidation")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260313171510.230998-2-bvanassche@acm.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 7746e3bd4cc19b5092e00d32d676e329bfcb6900 upstream.
fsnotify_get_mark_safe() may return false for a mark on an unrelated group,
which results in bypassing the permission check.
Fix by skipping over detached marks that are not in the current group.
CC: stable@vger.kernel.org
Fixes: abc77577a669 ("fsnotify: Provide framework for dropping SRCU lock in ->handle_event")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://patch.msgid.link/20260410144950.156160-1-mszeredi@redhat.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5b484311507b5d403c1f7a45f6aa3778549e268b upstream.
Even though nobody should use this value (except when declaring the
"flags" bitmap), kernel-doc still gets upset that it's not documented.
It reports:
WARNING: ../include/linux/device.h:519
Enum value 'DEV_FLAG_COUNT' not described in enum 'struct_device_flags'
Add the description of DEV_FLAG_COUNT.
Fixes: a2225b6e834a ("driver core: Don't let a device probe until it's ready")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/f318cd43-81fd-48b9-abf7-92af85f12f91@infradead.org
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260413195910.1.I23aca74fe2d3636a47df196a80920fecb2643220@changeid
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6f1d4d2ecfcd1b577dc87350ea965fe81f272e83 upstream.
Outside of the EFI tpm code, the TPM_MEMREMAP()/TPM_MEMUNMAP functions are
defined as trivial macros, leading to the mapping_size variable ending
up unused:
In file included from drivers/char/tpm/tpm-sysfs.c:16:
In file included from drivers/char/tpm/tpm.h:28:
include/linux/tpm_eventlog.h:167:6: error: variable 'mapping_size' set but not used [-Werror,-Wunused-but-set-variable]
167 | int mapping_size;
Turn the stubs into inline functions to avoid this warning.
Cc: stable@vger.kernel.org # v5.3+
Fixes: c46f3405692d ("tpm: Reserve the TPM final events table")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a2225b6e834a838ae3c93709760edc0a169eb2f2 ]
The moment we link a "struct device" into the list of devices for the
bus, it's possible probe can happen. This is because another thread
can load the driver at any time and that can cause the device to
probe. This has been seen in practice with a stack crawl that looks
like this [1]:
really_probe()
__driver_probe_device()
driver_probe_device()
__driver_attach()
bus_for_each_dev()
driver_attach()
bus_add_driver()
driver_register()
__platform_driver_register()
init_module() [some module]
do_one_initcall()
do_init_module()
load_module()
__arm64_sys_finit_module()
invoke_syscall()
As a result of the above, it was seen that device_links_driver_bound()
could be called for the device before "dev->fwnode->dev" was
assigned. This prevented __fw_devlink_pickup_dangling_consumers() from
being called which meant that other devices waiting on our driver's
sub-nodes were stuck deferring forever.
It's believed that this problem is showing up suddenly for two
reasons:
1. Android has recently (last ~1 year) implemented an optimization to
the order it loads modules [2]. When devices opt-in to this faster
loading, modules are loaded one-after-the-other very quickly. This
is unlike how other distributions do it. The reproduction of this
problem has only been seen on devices that opt-in to Android's
"parallel module loading".
2. Android devices typically opt-in to fw_devlink, and the most
noticeable issue is the NULL "dev->fwnode->dev" in
device_links_driver_bound(). fw_devlink is somewhat new code and
also not in use by all Linux devices.
Even though the specific symptom where "dev->fwnode->dev" wasn't
assigned could be fixed by moving that assignment higher in
device_add(), other parts of device_add() (like the call to
device_pm_add()) are also important to run before probe. Only moving
the "dev->fwnode->dev" assignment would likely fix the current
symptoms but lead to difficult-to-debug problems in the future.
Fix the problem by preventing probe until device_add() has run far
enough that the device is ready to probe. If somehow we end up trying
to probe before we're allowed, __driver_probe_device() will return
-EPROBE_DEFER which will make certain the device is noticed.
In the race condition that was seen with Android's faster module
loading, we will temporarily add the device to the deferred list and
then take it off immediately when device_add() probes the device.
Instead of adding another flag to the bitfields already in "struct
device", instead add a new "flags" field and use that. This allows us
to freely change the bit from different thread without worrying about
corrupting nearby bits (and means threads changing other bit won't
corrupt us).
[1] Captured on a machine running a downstream 6.6 kernel
[2] https://cs.android.com/android/platform/superproject/main/+/main:system/core/libmodprobe/libmodprobe.cpp?q=LoadModulesParallel
Cc: stable@vger.kernel.org
Fixes: 2023c610dc54 ("Driver core: add new device to bus's list before probing")
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260406162231.v5.1.Id750b0fbcc94f23ed04b7aecabcead688d0d8c17@changeid
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 82a0302e7167d0b7c6cde56613db3748f8dd806d ]
Remove comment for reorder_work which no longer exists.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 71203f68c774 ("padata: Fix pd UAF once and for all")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Bin Lan <lanbincn@139.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 71203f68c7749609d7fc8ae6ad054bdedeb24f91 ]
There is a race condition/UAF in padata_reorder that goes back
to the initial commit. A reference count is taken at the start
of the process in padata_do_parallel, and released at the end in
padata_serial_worker.
This reference count is (and only is) required for padata_replace
to function correctly. If padata_replace is never called then
there is no issue.
In the function padata_reorder which serves as the core of padata,
as soon as padata is added to queue->serial.list, and the associated
spin lock released, that padata may be processed and the reference
count on pd would go away.
Fix this by getting the next padata before the squeue->serial lock
is released.
In order to make this possible, simplify padata_reorder by only
calling it once the next padata arrives.
Fixes: 16295bec6398 ("padata: Generic parallelization/serialization interface")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
[ Adjust context of padata_find_next(). Replace
cpumask_next_wrap(cpu, pd->cpumask.pcpu) with
cpumask_next_wrap(cpu, pd->cpumask.pcpu, -1, false) in padata_reorder() in
v5.10 according to dc5bb9b769c9 ("cpumask: deprecate cpumask_next_wrap()") and
f954a2d37637 ("padata: switch padata_find_next() to using cpumask_next_wrap()")
. ]
Signed-off-by: Bin Lan <lanbincn@139.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 25e531b422dc2ac90cdae3b6e74b5cdeb081440d upstream.
xHCI hardware maintains its endpoint state between add_endpoint()
and drop_endpoint() calls followed by successful check_bandwidth().
So does the driver.
Core may call endpoint_disable() during xHCI endpoint life, so don't
clear host_ep->hcpriv then, because this breaks endpoint_reset().
If a driver calls usb_set_interface(), submits URBs which make host
sequence state non-zero and calls usb_clear_halt(), the device clears
its sequence state but xhci_endpoint_reset() bails out. The next URB
malfunctions: USB2 loses one packet, USB3 gets Transaction Error or
may not complete at all on some (buggy?) HCs from ASMedia and AMD.
This is triggered by uvcvideo on bulk video devices.
The code was copied from ehci_endpoint_disable() but it isn't needed
here - hcpriv should only be NULL on emulated root hub endpoints.
It might prevent resetting and inadvertently enabling a disabled and
dropped endpoint, but core shouldn't try to reset dropped endpoints.
Document xhci requirements regarding hcpriv. They are currently met.
Fixes: 18b74067ac78 ("xhci: Fix use-after-free regression in xhci clear hub TT implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260402131342.2628648-26-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d55c571e4333fac71826e8db3b9753fadfbead6a ]
This script
#!/usr/bin/bash
echo 0 > /proc/sys/kernel/randomize_va_space
echo 'void main(void) {}' > TEST.c
# -fcf-protection to ensure that the 1st endbr32 insn can't be emulated
gcc -m32 -fcf-protection=branch TEST.c -o test
bpftrace -e 'uprobe:./test:main {}' -c ./test
"hangs", the probed ./test task enters an endless loop.
The problem is that with randomize_va_space == 0
get_unmapped_area(TASK_SIZE - PAGE_SIZE) called by xol_add_vma() can not
just return the "addr == TASK_SIZE - PAGE_SIZE" hint, this addr is used
by the stack vma.
arch_get_unmapped_area_topdown() doesn't take TIF_ADDR32 into account and
in_32bit_syscall() is false, this leads to info.high_limit > TASK_SIZE.
vm_unmapped_area() happily returns the high address > TASK_SIZE and then
get_unmapped_area() returns -ENOMEM after the "if (addr > TASK_SIZE - len)"
check.
handle_swbp() doesn't report this failure (probably it should) and silently
restarts the probed insn. Endless loop.
I think that the right fix should change the x86 get_unmapped_area() paths
to rely on TIF_ADDR32 rather than in_32bit_syscall(). Note also that if
CONFIG_X86_X32_ABI=y, in_x32_syscall() falsely returns true in this case
because ->orig_ax = -1.
But we need a simple fix for -stable, so this patch just sets TS_COMPAT if
the probed task is 32-bit to make in_ia32_syscall() true.
Fixes: 1b028f784e8c ("x86/mm: Introduce mmap_compat_base() for 32-bit mmap()")
Reported-by: Paulo Andrade <pandrade@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/all/aV5uldEvV7pb4RA8@redhat.com/
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/aWO7Fdxn39piQnxu@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0b16e69d17d8c35c5c9d5918bf596c75a44655d3 upstream.
When exiting to userspace to service an emulated MMIO write, copy the
to-be-written value to a scratch field in the MMIO fragment if the size
of the data payload is 8 bytes or less, i.e. can fit in a single chunk,
instead of pointing the fragment directly at the source value.
This fixes a class of use-after-free bugs that occur when the emulator
initiates a write using an on-stack, local variable as the source, the
write splits a page boundary, *and* both pages are MMIO pages. Because
KVM's ABI only allows for physically contiguous MMIO requests, accesses
that split MMIO pages are separated into two fragments, and are sent to
userspace one at a time. When KVM attempts to complete userspace MMIO in
response to KVM_RUN after the first fragment, KVM will detect the second
fragment and generate a second userspace exit, and reference the on-stack
variable.
The issue is most visible if the second KVM_RUN is performed by a separate
task, in which case the stack of the initiating task can show up as truly
freed data.
==================================================================
BUG: KASAN: use-after-free in complete_emulated_mmio+0x305/0x420
Read of size 1 at addr ffff888009c378d1 by task syz-executor417/984
CPU: 1 PID: 984 Comm: syz-executor417 Not tainted 5.10.0-182.0.0.95.h2627.eulerosv2r13.x86_64 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Call Trace:
dump_stack+0xbe/0xfd
print_address_description.constprop.0+0x19/0x170
__kasan_report.cold+0x6c/0x84
kasan_report+0x3a/0x50
check_memory_region+0xfd/0x1f0
memcpy+0x20/0x60
complete_emulated_mmio+0x305/0x420
kvm_arch_vcpu_ioctl_run+0x63f/0x6d0
kvm_vcpu_ioctl+0x413/0xb20
__se_sys_ioctl+0x111/0x160
do_syscall_64+0x30/0x40
entry_SYSCALL_64_after_hwframe+0x67/0xd1
RIP: 0033:0x42477d
Code: <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007faa8e6890e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000004d7338 RCX: 000000000042477d
RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 0000000000000005
RBP: 00000000004d7330 R08: 00007fff28d546df R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004d733c
R13: 0000000000000000 R14: 000000000040a200 R15: 00007fff28d54720
The buggy address belongs to the page:
page:0000000029f6a428 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x9c37
flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0000000 0000000000000000 ffffea0000270dc8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888009c37780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888009c37800: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff888009c37880: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff888009c37900: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff888009c37980: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================
The bug can also be reproduced with a targeted KVM-Unit-Test by hacking
KVM to fill a large on-stack variable in complete_emulated_mmio(), i.e. by
overwrite the data value with garbage.
Limit the use of the scratch fields to 8-byte or smaller accesses, and to
just writes, as larger accesses and reads are not affected thanks to
implementation details in the emulator, but add a sanity check to ensure
those details don't change in the future. Specifically, KVM never uses
on-stack variables for accesses larger that 8 bytes, e.g. uses an operand
in the emulator context, and *all* reads are buffered through the mem_read
cache.
Note! Using the scratch field for reads is not only unnecessary, it's
also extremely difficult to handle correctly. As above, KVM buffers all
reads through the mem_read cache, and heavily relies on that behavior when
re-emulating the instruction after a userspace MMIO read exit. If a read
splits a page, the first page is NOT an MMIO page, and the second page IS
an MMIO page, then the MMIO fragment needs to point at _just_ the second
chunk of the destination, i.e. its position in the mem_read cache. Taking
the "obvious" approach of copying the fragment value into the destination
when re-emulating the instruction would clobber the first chunk of the
destination, i.e. would clobber the data that was read from guest memory.
Fixes: f78146b0f923 ("KVM: Fix page-crossing MMIO")
Suggested-by: Yashu Zhang <zhangjiaji1@huawei.com>
Reported-by: Yashu Zhang <zhangjiaji1@huawei.com>
Closes: https://lore.kernel.org/all/369eaaa2b3c1425c85e8477066391bc7@huawei.com
Cc: stable@vger.kernel.org
Tested-by: Tom Lendacky <thomas.lendacky@gmail.com>
Tested-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Link: https://patch.msgid.link/20260225012049.920665-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 5c1a72a0fbe1b02c3ce0537f85f92ea935e0beec upstream.
There is a few stubs that left untouched during constification of
the fwnode related APIs. Constify three more stubs here.
Fixes: 8b9d6802583a ("ACPI: Constify acpi_bus helper functions, switch to macros")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 31e62c2ebbfdc3fe3dbdf5e02c92a9dc67087a3a upstream.
The 'dumpability' of a task is fundamentally about the memory image of
the task - the concept comes from whether it can core dump or not - and
makes no sense when you don't have an associated mm.
And almost all users do in fact use it only for the case where the task
has a mm pointer.
But we have one odd special case: ptrace_may_access() uses 'dumpable' to
check various other things entirely independently of the MM (typically
explicitly using flags like PTRACE_MODE_READ_FSCREDS). Including for
threads that no longer have a VM (and maybe never did, like most kernel
threads).
It's not what this flag was designed for, but it is what it is.
The ptrace code does check that the uid/gid matches, so you do have to
be uid-0 to see kernel thread details, but this means that the
traditional "drop capabilities" model doesn't make any difference for
this all.
Make it all make a *bit* more sense by saying that if you don't have a
MM pointer, we'll use a cached "last dumpability" flag if the thread
ever had a MM (it will be zero for kernel threads since it is never
set), and require a proper CAP_SYS_PTRACE capability to override.
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 002752af7b89b74c64fe6bec8c5fde3d3a7810d8 ]
Some of the fwnode APIs might return an error pointer instead of NULL
or valid fwnode handle. The result of such API call may be considered
optional and hence the test for it is usually done in a form of
fwnode = fwnode_find_reference(...);
if (IS_ERR(fwnode))
...error handling...
Nevertheless the resulting fwnode may have bumped the reference count
and hence caller of the above API is obliged to call fwnode_handle_put().
Since fwnode may be not valid either as NULL or error pointer the check
has to be performed there. This approach uglifies the code and adds
a point of making a mistake, i.e. forgetting about error point case.
To prevent this, allow an error pointer to be passed to the fwnode APIs.
Fixes: 83b34afb6b79 ("device property: Introduce fwnode_find_reference()")
Reported-by: Nuno Sá <nuno.sa@analog.com>
Tested-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 2692c614f8f0 ("device property: Allow secondary lookup in fwnode_get_next_child_node()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
