| Age | Commit message (Collapse) | Author |
|---|
|
The original comment doesn't match the pin attribution, probably due
to a hasty copy/paste.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Icenowy Zheng <uwu@icenowy.me>
Link: https://lore.kernel.org/20250701201124.812882-2-paulk@sys-base.io
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
soc-button-array hardcodes a debounce value by means of gpio_keys
which uses pinctrl-amd as a backend to program debounce for a GPIO.
This hardcoded value doesn't match what the firmware intended to be
programmed in _AEI. The hardcoded debounce leads to problems waking
from suspend. There isn't appetite to conditionalize the behavior in
soc-button-array or gpio-keys so clear it when the system suspends to
avoid problems with being able to resume.
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Hans de Goede <hansg@kernel.org>
Fixes: 5c4fa2a6da7fb ("Input: soc_button_array - debounce the buttons")
Link: https://lore.kernel.org/linux-input/mkgtrb5gt7miyg6kvqdlbu4nj3elym6ijudobpdi26gp4xxay5@rsa6ytrjvj2q/
Link: https://lore.kernel.org/linux-input/20250625215813.3477840-1-superm1@kernel.org/
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/20250627150155.3311574-1-superm1@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v6.17
- Use the new GPIO line value setter callbacks,
- Validate pins before setting a mux function on RZ/G2L.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add request and free gpio_chip hooks to support
gpio allocation and release in the driver.
Signed-off-by: Jack Ping CHNG <jchng@maxlinear.com>
Link: https://lore.kernel.org/20250627005419.3124660-1-jchng@maxlinear.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add support for selecting multiple TLMM regions using the
tlmm-test tool.
The current implementation only selects the TLMM Node region
0, which can lead to incorrect region selection.
QCS 615 TLMM Node dts reg:
tlmm: pinctrl@3100000 {
compatible = "qcom,qcs615-tlmm";
reg = <0x0 0x03100000 0x0 0x300000>,
<0x0 0x03500000 0x0 0x300000>,
<0x0 0x03d00000 0x0 0x300000>;
reg-names = "east",
"west",
"south";
QCS615 gpio57 is in the south region with an offset of 0x39000,
and its address is 0x3d39000. However, the default region selection
is region 0 (east region), resulting in a wrong calculated address
of 0x3139000.
Add a tlmm option parameter named tlmm_reg_name to select the region.
If the user does not input the parameter, the default region is 0.
Signed-off-by: Yuanjie Yang <quic_yuanjiey@quicinc.com>
Link: https://lore.kernel.org/20250624090600.91063-1-quic_yuanjiey@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
PINCTRL_RZV2M is selected by ARCH_R9A09G011, hence there is no need to
depend on the latter. Move the dependency on COMPILE_TEST to the symbol
prompt, like is done for all other auto-selected pin control symbols.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/d74843e06f73cd4c6e822d65f606e6042a50a0b7.1750945516.git.geert+renesas@glider.be
|
|
Renesas SoC has chip number / chip name. Some SoC is using chip number,
and some SoC is using chip name on current Renesas pincontrol Kconfig.
Let's unify "pin control support for ${CHIP_NUMBER} (${CHIP_NAME}).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/87bjqdraf1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Current Renesas Kconfig is randomly arranged. Let's sort it by
alphabetical/number order, same as Makefile.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/87cyatrafh.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The current implementation for the pin controller peripheral
on the RP1 chipset supports gpio functionality and just the
basic configuration of pin hw capabilities.
Add support for selecting the pin alternate function (pinmux)
and full configuration of the pin (pinconf).
Related pins are also gathered into groups.
Signed-off-by: Andrea della Porta <andrea.porta@suse.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/all/8c282b89b1aa8b9e3c00f6bd3980332c47d82df7.1750778806.git.andrea.porta@suse.com/
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
|
|
gs101 differs to other currently supported SoCs in that it has 3 wakeup
mask registers for the 67 external wakeup interrupt pins in alive and
far_alive.
EINT_WAKEUP_MASK 0x3A80 EINT[31:0]
EINT_WAKEUP_MASK2 0x3A84 EINT[63:32]
EINT_WAKEUP_MASK3 0x3A88 EINT[66:64]
Add gs101 specific callbacks and a dedicated gs101_wkup_irq_chip struct to
handle these differences.
The current wakeup mask with upstream is programmed as
WAKEUP_MASK0[0x3A80] value[0xFFFFFFFF]
WAKEUP_MASK1[0x3A84] value[0xF2FFEFFF]
WAKEUP_MASK2[0x3A88] value[0xFFFFFFFF]
Which corresponds to the following wakeup sources:
gpa7-3 vol down
gpa8-1 vol up
gpa10-1 power
gpa8-2 typec-int
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250619-gs101-eint-mask-v1-2-89438cfd7499@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
To avoid having an exact copy of this struct for gs101 rename it and use it
for both SoCs for eint banks.
The purpose of this for exynosautov920 and gs101 is to obtain the PMU
syscon for writing the calculated WAKEUP_MASK register(s).
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250619-gs101-eint-mask-v1-1-89438cfd7499@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Sparse complains:
sparse warnings: (new ones prefixed by >>)
>> drivers/pinctrl/meson/pinctrl-amlogic-a4.c:126:24: sparse: sparse:
symbol 'multi_mux_s7' was not declared. Should it be static?
>> drivers/pinctrl/meson/pinctrl-amlogic-a4.c:135:28: sparse: sparse:
symbol 's7_priv_data' was not declared. Should it be static?
>> drivers/pinctrl/meson/pinctrl-amlogic-a4.c:140:24: sparse: sparse:
symbol 'multi_mux_s6' was not declared. Should it be static?
>> drivers/pinctrl/meson/pinctrl-amlogic-a4.c:154:28: sparse: sparse:
symbol 's6_priv_data' was not declared. Should it be static?
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506122145.wWAtKBoy-lkp@intel.com/
Cc: Xianwei Zhao <xianwei.zhao@amlogic.com>
Fixes: 1f8e5dfddaa7 ("pinctrl: meson: support amlogic S6/S7/S7D SoC")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20250624-amlogic-a4-fix-v1-1-03f0856d10cb@linaro.org
|
|
The u32 variable voltage is being compared to less than zero and
this can never be true. Fix this by making voltage an int type which
is the same type as the return from the call to regulator_get_voltage.
Fixes: 5b797bcc00ef ("pinctrl: eswin: Add EIC7700 pinctrl driver")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/20250623222004.280928-1-colin.i.king@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Move DT parse before pinctrl register. This ensures that device tree
parsing is done before calling devm_pinctrl_register() to prevent using
uninitialized pin resources.
Fixes: 545887eab6f6 ("pinctrl: canaan: Add support for k230 SoC")
Reported-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Ze Huang <huangze@whut.edu.cn>
Link: https://lore.kernel.org/20250624-k230-return-check-v1-2-6b4fc5ba0c41@whut.edu.cn
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add a NULL check for the return value of of_get_property() when
retrieving the "pinmux" property in the group parser. This avoids
a potential NULL pointer dereference if the property is missing
from the device tree node.
Also fix a typo ("sintenel") in the device ID match table comment,
correcting it to "sentinel".
Fixes: 545887eab6f6 ("pinctrl: canaan: Add support for k230 SoC")
Reported-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Ze Huang <huangze@whut.edu.cn>
Link: https://lore.kernel.org/20250624-k230-return-check-v1-1-6b4fc5ba0c41@whut.edu.cn
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
G12B and SM1 have additional PWM pinmuxes for b, c, and d.
Signed-off-by: Da Xue <da@libre.computer>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/20250619022337.43900-1-da@libre.computer
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The zynq driver can be enabled for compile-testing on builds without
CONFIG_OF, leading to a link error:
ld.lld-21: error: undefined symbol: pinconf_generic_dt_node_to_map
referenced by pinconf-generic.h:231 (/home/arnd/arm-soc/include/linux/pinctrl/pinconf-generic.h:231)
drivers/pinctrl/pinctrl-zynq.o:(pinconf_generic_dt_node_to_map_all) in archive vmlinux.a
Prevent this with the proper compile time dependency.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506212021.deAhuaWr-lkp@intel.com/
Fixes: 1982621decaf ("pinctrl: Allow compile testing for K210, TB10X and ZYNQ")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/20250620130814.2580678-1-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
In the original implementation, krealloc() failure handling incorrectly
assigned the original memory pointer to NULL after kfree(), causing a
memory leak when reallocation failed.
Fixes: de845036f997 ("pinctrl: berlin: fix error return code of berlin_pinctrl_build_state()")
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Link: https://lore.kernel.org/20250620015343.21494-1-chenyuan_fl@163.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
In sunxi_pctrl_dt_node_to_map(), when krealloc() fails to resize
the pinctrl_map array, the function returns -ENOMEM directly
without freeing the previously allocated *map buffer. This results
in a memory leak of the original kmalloc_array allocation.
Fixes: e11dee2e98f8 ("pinctrl: sunxi: Deal with configless pins")
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Link: https://lore.kernel.org/20250620012708.16709-1-chenyuan_fl@163.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
We must unlock the mutex *after* the `out` label or we'd trigger a
deadlock in error path.
Fixes: dffe286e2428 ("pinctrl: aw9523: use new GPIO line value setter callbacks")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202506191952.A03cvn22-lkp@intel.com/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250619173537.64298-1-brgl@bgdev.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Fix the following missing-prototypes build warning:
drivers/pinctrl/pinctrl-falcon.c:508:12: error: no previous prototype for 'pinctrl_falcon_init' [-Werror=missing-prototypes]
508 | int __init pinctrl_falcon_init(void)
| ^~~~~~~~~~~~~~~~~~~
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://lore.kernel.org/OSBPR01MB167014AF54EF9818CB98C83BBC72A@OSBPR01MB1670.jpnprd01.prod.outlook.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Ensure only valid pins are configured by validating pin mappings before
setting the mux function.
Rename rzg2l_validate_gpio_pin() to rzg2l_validate_pin() to reflect its
broader purpose validating both GPIO pins and muxed pins. This helps
avoid invalid configurations.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250616132750.216368-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
As part of a wider cleanup trying to get rid of OF specific APIs, an
incorrect (and partially unrelated) cleanup was introduced.
The goal was to replace a device_for_each_chil_node() loop including an
additional condition inside by a macro doing both the loop and the
check on a single line.
The snippet:
device_for_each_child_node(dev, child)
if (fwnode_property_present(child, "gpio-controller"))
continue;
was replaced by:
for_each_gpiochip_node(dev, child)
which expands into:
device_for_each_child_node(dev, child)
for_each_if(fwnode_property_present(child, "gpio-controller"))
This change is actually doing the opposite of what was initially
expected, breaking the probe of this driver, breaking at the same time
the whole boot of Nuvoton platforms (no more console, the kernel WARN()).
Revert these two changes to roll back to the correct behavior.
Fixes: 693c9ecd8326 ("pinctrl: nuvoton: Reduce use of OF-specific APIs")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/20250613181312.1269794-1-miquel.raynal@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250612-gpiochip-set-rv-pinctrl-remaining-v1-16-556b0a530cd4@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250612-gpiochip-set-rv-pinctrl-remaining-v1-15-556b0a530cd4@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250612-gpiochip-set-rv-pinctrl-remaining-v1-14-556b0a530cd4@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250612-gpiochip-set-rv-pinctrl-remaining-v1-13-556b0a530cd4@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250612-gpiochip-set-rv-pinctrl-remaining-v1-12-556b0a530cd4@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250612-gpiochip-set-rv-pinctrl-remaining-v1-11-556b0a530cd4@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/20250612-gpiochip-set-rv-pinctrl-remaining-v1-10-556b0a530cd4@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250612-gpiochip-set-rv-pinctrl-remaining-v1-9-556b0a530cd4@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250612-gpiochip-set-rv-pinctrl-remaining-v1-8-556b0a530cd4@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This function is not exported and is only used locally. Make it static.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250612-gpiochip-set-rv-pinctrl-remaining-v1-7-556b0a530cd4@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250612-gpiochip-set-rv-pinctrl-remaining-v1-6-556b0a530cd4@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250612-gpiochip-set-rv-pinctrl-remaining-v1-5-556b0a530cd4@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250612-gpiochip-set-rv-pinctrl-remaining-v1-4-556b0a530cd4@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250612-gpiochip-set-rv-pinctrl-remaining-v1-3-556b0a530cd4@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250612-gpiochip-set-rv-pinctrl-remaining-v1-2-556b0a530cd4@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250612-gpiochip-set-rv-pinctrl-remaining-v1-1-556b0a530cd4@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/20250612-gpiochip-set-rv-pinctrl-starfive-v1-2-8507b46516f5@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/20250612-gpiochip-set-rv-pinctrl-starfive-v1-1-8507b46516f5@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/20250612-gpiochip-set-rv-pinctrl-cirrus-v1-2-2d45c1f92557@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/20250612-gpiochip-set-rv-pinctrl-cirrus-v1-1-2d45c1f92557@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Add support for the pin controller in ESWIN's EIC7700 SoC,
which supports pin multiplexing, pin configuration,
and rgmii voltage control.
Co-developed-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Yulin Lu <luyulin@eswincomputing.com>
Link: https://lore.kernel.org/20250612105159.1241-1-luyulin@eswincomputing.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
On some platforms, the UFS-reset pin has no interrupt logic in TLMM but
is nevertheless registered as a GPIO in the kernel. This enables the
user-space to trigger a BUG() in the pinctrl-msm driver by running, for
example: `gpiomon -c 0 113` on RB2.
The exact culprit is requesting pins whose intr_detection_width setting
is not 1 or 2 for interrupts. This hits a BUG() in
msm_gpio_irq_set_type(). Potentially crashing the kernel due to an
invalid request from user-space is not optimal, so let's go through the
pins and mark those that would fail the check as invalid for the irq chip
as we should not even register them as available irqs.
This function can be extended if we determine that there are more
corner-cases like this.
Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver")
Cc: stable@vger.kernel.org
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250612091448.41546-1-brgl@bgdev.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
irq_domain_create_simple() takes fwnode as the first argument. It can be
extracted from the struct device using dev_fwnode() helper instead of
using of_node with of_fwnode_handle().
So use the dev_fwnode() helper.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Acked-by: Chen-Yu Tsai <wens@sie.org>
Link: https://lore.kernel.org/20250611104348.192092-17-jirislaby@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The local static 'struct pinctrl_desc' is not modified, so can be made
const for code safety.
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/20250611-pinctrl-const-desc-v2-16-b11c1d650384@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The local static 'struct pinctrl_desc' is not modified, so can be made
const for code safety after moving .pins and .npins assignment to
definition.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20250611-pinctrl-const-desc-v2-15-b11c1d650384@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Assign 'struct pinctrl_desc' .pins and .npins members in definition to
make clear that number of pins is fixed and have less code in the probe.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20250611-pinctrl-const-desc-v2-14-b11c1d650384@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Assign 'struct pinctrl_desc' .pins and .npins members in definition to
make clear that number of pins is fixed and have less code in the probe.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20250611-pinctrl-const-desc-v2-13-b11c1d650384@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
