| Age | Commit message (Collapse) | Author |
|---|
|
The cited commit introduced MLX5_PRIV_FLAGS_SWITCH_LEGACY to identify
when a transition to legacy mode is requested via devlink. However, the
logic failed to clear this flag if the mode was subsequently changed
back to MLX5_ESWITCH_OFFLOADS (switchdev). Consequently, if a user
toggled from legacy to switchdev, the flag remained set, leaving the
driver with wrong state indicating
Fix this by explicitly clearing the MLX5_PRIV_FLAGS_SWITCH_LEGACY bit
when the requested mode is MLX5_ESWITCH_OFFLOADS.
Fixes: 2a4f56fbcc47 ("net/mlx5e: Keep netdev when leave switchdev for devlink set legacy only")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260224114652.1787431-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mlx5_lag_disable_change() unconditionally called mlx5_disable_lag() when
LAG was active, which is incorrect for MLX5_LAG_MODE_MPESW.
Hnece, call mlx5_disable_mpesw() when running in MPESW mode.
Fixes: a32327a3a02c ("net/mlx5: Lag, Control MultiPort E-Switch single FDB mode")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260224114652.1787431-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix a circular locking dependency between dbg_mutex and the domain
rx/tx mutexes that could lead to a deadlock.
The dump path in dr_dump_domain_all() was acquiring locks in the order:
dbg_mutex -> rx.mutex -> tx.mutex
While the table/matcher creation paths acquire locks in the order:
rx.mutex -> tx.mutex -> dbg_mutex
This inverted lock ordering creates a circular dependency. Fix this by
changing dr_dump_domain_all() to acquire the domain lock before
dbg_mutex, matching the order used in mlx5dr_table_create() and
mlx5dr_matcher_create().
Lockdep splat:
======================================================
WARNING: possible circular locking dependency detected
6.19.0-rc6net_next_e817c4e #1 Not tainted
------------------------------------------------------
sos/30721 is trying to acquire lock:
ffff888102df5900 (&dmn->info.rx.mutex){+.+.}-{4:4}, at:
dr_dump_start+0x131/0x450 [mlx5_core]
but task is already holding lock:
ffff888102df5bc0 (&dmn->dump_info.dbg_mutex){+.+.}-{4:4}, at:
dr_dump_start+0x10b/0x450 [mlx5_core]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&dmn->dump_info.dbg_mutex){+.+.}-{4:4}:
__mutex_lock+0x91/0x1060
mlx5dr_matcher_create+0x377/0x5e0 [mlx5_core]
mlx5_cmd_dr_create_flow_group+0x62/0xd0 [mlx5_core]
mlx5_create_flow_group+0x113/0x1c0 [mlx5_core]
mlx5_chains_create_prio+0x453/0x2290 [mlx5_core]
mlx5_chains_get_table+0x2e2/0x980 [mlx5_core]
esw_chains_create+0x1e6/0x3b0 [mlx5_core]
esw_create_offloads_fdb_tables.cold+0x62/0x63f [mlx5_core]
esw_offloads_enable+0x76f/0xd20 [mlx5_core]
mlx5_eswitch_enable_locked+0x35a/0x500 [mlx5_core]
mlx5_devlink_eswitch_mode_set+0x561/0x950 [mlx5_core]
devlink_nl_eswitch_set_doit+0x67/0xe0
genl_family_rcv_msg_doit+0xe0/0x130
genl_rcv_msg+0x188/0x290
netlink_rcv_skb+0x4b/0xf0
genl_rcv+0x24/0x40
netlink_unicast+0x1ed/0x2c0
netlink_sendmsg+0x210/0x450
__sock_sendmsg+0x38/0x60
__sys_sendto+0x119/0x180
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x70/0xd00
entry_SYSCALL_64_after_hwframe+0x4b/0x53
-> #1 (&dmn->info.tx.mutex){+.+.}-{4:4}:
__mutex_lock+0x91/0x1060
mlx5dr_table_create+0x11d/0x530 [mlx5_core]
mlx5_cmd_dr_create_flow_table+0x62/0x140 [mlx5_core]
__mlx5_create_flow_table+0x46f/0x960 [mlx5_core]
mlx5_create_flow_table+0x16/0x20 [mlx5_core]
esw_create_offloads_fdb_tables+0x136/0x240 [mlx5_core]
esw_offloads_enable+0x76f/0xd20 [mlx5_core]
mlx5_eswitch_enable_locked+0x35a/0x500 [mlx5_core]
mlx5_devlink_eswitch_mode_set+0x561/0x950 [mlx5_core]
devlink_nl_eswitch_set_doit+0x67/0xe0
genl_family_rcv_msg_doit+0xe0/0x130
genl_rcv_msg+0x188/0x290
netlink_rcv_skb+0x4b/0xf0
genl_rcv+0x24/0x40
netlink_unicast+0x1ed/0x2c0
netlink_sendmsg+0x210/0x450
__sock_sendmsg+0x38/0x60
__sys_sendto+0x119/0x180
__x64_sys_sendto+0x20/0x30
do_syscall_64+0x70/0xd00
entry_SYSCALL_64_after_hwframe+0x4b/0x53
-> #0 (&dmn->info.rx.mutex){+.+.}-{4:4}:
__lock_acquire+0x18b6/0x2eb0
lock_acquire+0xd3/0x2c0
__mutex_lock+0x91/0x1060
dr_dump_start+0x131/0x450 [mlx5_core]
seq_read_iter+0xe3/0x410
seq_read+0xfb/0x130
full_proxy_read+0x53/0x80
vfs_read+0xba/0x330
ksys_read+0x65/0xe0
do_syscall_64+0x70/0xd00
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&dmn->dump_info.dbg_mutex);
lock(&dmn->info.tx.mutex);
lock(&dmn->dump_info.dbg_mutex);
lock(&dmn->info.rx.mutex);
*** DEADLOCK ***
Fixes: 9222f0b27da2 ("net/mlx5: DR, Add support for dumping steering info")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260224114652.1787431-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
A good number of fixes:
- cfg80211:
- cancel rfkill work appropriately
- fix radiotap parsing to correctly reject field 18
- fix wext (yes...) off-by-one for IGTK key ID
- mac80211:
- fix for mesh NULL pointer dereference
- fix for stack out-of-bounds (2 bytes) write on
specific multi-link action frames
- set default WMM parameters for all links
- mwifiex: check dev_alloc_name() return value correctly
- libertas: fix potential timer use-after-free
- brcmfmac: fix crash on probe failure
* tag 'wireless-2026-02-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: fix NULL pointer dereference in mesh_rx_csa_frame()
wifi: mac80211: bounds-check link_id in ieee80211_ml_reconfiguration
wifi: mac80211: set default WMM parameters on all links
wifi: libertas: fix use-after-free in lbs_free_adapter()
wifi: mwifiex: Fix dev_alloc_name() return value check
wifi: brcmfmac: Fix potential kernel oops when probe fails
wifi: radiotap: reject radiotap with unknown bits
wifi: cfg80211: cancel rfkill_block work in wiphy_unregister()
wifi: cfg80211: wext: fix IGTK key ID off-by-one
====================
Link: https://patch.msgid.link/20260225113159.360574-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jakub Kicinski reported following issue in upcoming patches:
W=1 C=1 GCC build gives us:
net/bridge/netfilter/nf_conntrack_bridge.c: note: in included file (through
../include/linux/if_pppox.h, ../include/uapi/linux/netfilter_bridge.h,
../include/linux/netfilter_bridge.h): include/uapi/linux/if_pppox.h:
153:29: warning: array of flexible structures
sparse doesn't like that hdr has a zero-length array which overlaps
proto. The kernel code doesn't currently need those arrays.
PPPoE connection is functional after applying this patch.
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
Link: https://patch.msgid.link/20260224155030.106918-1-ericwouds@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Correct spelling mistakes in comments:
- Fix misspelling of gro_receive
- Fix misspelling of Partition
Signed-off-by: Abhilekh Deka <abhindeka@gmail.com>
Reviewed-by: Dave Marquardt <davemarq@linux.ibm.com>
Link: https://patch.msgid.link/20260224153601.17534-1-abhindeka@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Wire phy_ethtool_nway_reset() as the .nway_reset ethtool operation,
allowing userspace to restart PHY autonegotiation via 'ethtool -r'.
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260224145723.49450-1-nb@tipi-net.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
syzbot is reporting
unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 3
ref_tracker: netdev@ffff88807dcf8618 has 1/2 users at
__netdev_tracker_alloc include/linux/netdevice.h:4400 [inline]
netdev_hold include/linux/netdevice.h:4429 [inline]
inetdev_init+0x201/0x4e0 net/ipv4/devinet.c:286
inetdev_event+0x251/0x1610 net/ipv4/devinet.c:1600
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_mtu net/core/dev.c:2318 [inline]
netif_set_mtu_ext+0x5aa/0x800 net/core/dev.c:9886
netif_set_mtu+0xd7/0x1b0 net/core/dev.c:9907
dev_set_mtu+0x126/0x260 net/core/dev_api.c:248
team_port_del+0xb07/0xcb0 drivers/net/team/team_core.c:1333
team_del_slave drivers/net/team/team_core.c:1936 [inline]
team_device_event+0x207/0x5b0 drivers/net/team/team_core.c:2929
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2281 [inline]
call_netdevice_notifiers net/core/dev.c:2295 [inline]
__dev_change_net_namespace+0xcb7/0x2050 net/core/dev.c:12592
do_setlink+0x2ce/0x4590 net/core/rtnetlink.c:3060
rtnl_changelink net/core/rtnetlink.c:3776 [inline]
__rtnl_newlink net/core/rtnetlink.c:3935 [inline]
rtnl_newlink+0x15a9/0x1be0 net/core/rtnetlink.c:4072
rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
problem. Ido Schimmel found steps to reproduce
ip link add name team1 type team
ip link add name dummy1 mtu 1499 master team1 type dummy
ip netns add ns1
ip link set dev dummy1 netns ns1
ip -n ns1 link del dev dummy1
and also found that the same issue was fixed in the bond driver in
commit f51048c3e07b ("bonding: avoid NETDEV_CHANGEMTU event when
unregistering slave").
Let's do similar thing for the team driver, with commit ad7c7b2172c3 ("net:
hold netdev instance lock during sysfs operations") and commit 303a8487a657
("net: s/__dev_set_mtu/__netif_set_mtu/") also applied.
Reported-by: syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=881d65229ca4f9ae8c84
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Fixes: 3d249d4ca7d0 ("net: introduce ethernet teaming device")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260224125709.317574-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While testing corner cases in the driver, a use-after-free crash
was found on the service rescan PCI path.
When mana_serv_reset() calls mana_gd_suspend(), mana_gd_cleanup()
destroys gc->service_wq. If the subsequent mana_gd_resume() fails
with -ETIMEDOUT or -EPROTO, the code falls through to
mana_serv_rescan() which triggers pci_stop_and_remove_bus_device().
This invokes the PCI .remove callback (mana_gd_remove), which calls
mana_gd_cleanup() a second time, attempting to destroy the already-
freed workqueue. Fix this by NULL-checking gc->service_wq in
mana_gd_cleanup() and setting it to NULL after destruction.
Call stack of issue for reference:
[Sat Feb 21 18:53:48 2026] Call Trace:
[Sat Feb 21 18:53:48 2026] <TASK>
[Sat Feb 21 18:53:48 2026] mana_gd_cleanup+0x33/0x70 [mana]
[Sat Feb 21 18:53:48 2026] mana_gd_remove+0x3a/0xc0 [mana]
[Sat Feb 21 18:53:48 2026] pci_device_remove+0x41/0xb0
[Sat Feb 21 18:53:48 2026] device_remove+0x46/0x70
[Sat Feb 21 18:53:48 2026] device_release_driver_internal+0x1e3/0x250
[Sat Feb 21 18:53:48 2026] device_release_driver+0x12/0x20
[Sat Feb 21 18:53:48 2026] pci_stop_bus_device+0x6a/0x90
[Sat Feb 21 18:53:48 2026] pci_stop_and_remove_bus_device+0x13/0x30
[Sat Feb 21 18:53:48 2026] mana_do_service+0x180/0x290 [mana]
[Sat Feb 21 18:53:48 2026] mana_serv_func+0x24/0x50 [mana]
[Sat Feb 21 18:53:48 2026] process_one_work+0x190/0x3d0
[Sat Feb 21 18:53:48 2026] worker_thread+0x16e/0x2e0
[Sat Feb 21 18:53:48 2026] kthread+0xf7/0x130
[Sat Feb 21 18:53:48 2026] ? __pfx_worker_thread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ret_from_fork+0x269/0x350
[Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ret_from_fork_asm+0x1a/0x30
[Sat Feb 21 18:53:48 2026] </TASK>
Fixes: 505cc26bcae0 ("net: mana: Add support for auxiliary device servicing events")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/aZ2bzL64NagfyHpg@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The accounting for transmit frames does not count the descriptors
correctly. It uses:
tx_packets = (tx_q->cur_tx + 1) - first_tx;
however, these are indexes into a circular buffer, so cur_tx can be
less than first_tx, and when that happens, tx_packets becomes a very
large unsigned integer. When this is added to tx_q->tx_count_frames,
it has the effect of reducing the count of frames, possibly causing
it to also wrap to a very large unsigned integer.
Fix this by using CIRC_CNT() to calculate the number of descriptors
used.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/E1vuoIl-0000000Aouz-0ttb@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The stmmac descriptor queues are circular buffers, operated as far as
the hardware is concerned as either a ring, or a chain that loops back
on itself. From the software perspective, it forms a circular buffer.
We have a few places which calculate the number of in-use and free
entries in these circular buffers, for which we have macros for.
Use CIRC_CNT() and CIRC_SPACE() as appropriate to calculate these
values.
Validating, for stmmac_tx_avail(), which uses CIRC_SPACE():
dirty_tx = 1, cur_tx = 0 -> 0
dirty_tx = 0, cur_tx = 0 -> dma_tx_size - 1
dirty_tx = 0, cur_tx = 1 -> dma_tx_size - 2
dirty_tx passed as end, reduced by one. cur_tx passed as start.
Output on sane computers is identical.
For stmmac_rx_dirty(), which uses CIRC_CNT():
dirty_rx = 1, cur_rx = 0 -> dma_rx_size - 1
dirty_rx = 0, cur_rx = 0 -> 0
dirty_rx = 0, cur_rx = 1 -> 1
dirty_rx passed as start, cur_rx passed as end. Output is identical.
Same validation performed on the is_last_segment calculation, which
also gets converted to CIRC_CNT().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/E1vuoIg-0000000Aout-0LyS@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NVMEM typically loads after the ethernet driver and
of_get_ethdev_address returns -EPROBE_DEFER. return in such a case to
allow NVMEM to work.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260224014607.353378-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The kaweth driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Link: https://patch.msgid.link/2026022305-substance-virtual-c728@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The kalmia driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints.
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: d40261236e8e ("net/usb: Add Samsung Kalmia driver for Samsung GT-B3730")
Link: https://patch.msgid.link/2026022326-shack-headstone-ef6f@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The pegasus driver should validate that the device it is probing has the
proper number and types of USB endpoints it is expecting before it binds
to it. If a malicious device were to not have the same urbs the driver
will crash later on when it blindly accesses these endpoints.
Cc: Petko Manolov <petkan@nucleusys.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2026022347-legibly-attest-cc5c@gregkh
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
According to the dwmac v3.74a databook, only MII, GMII and RGMII dwmac
interface modes are supported for EEE. Restrict EEE to these modes, or
the modules supported by a PCS other than the GMAC's integrated PCS.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuUsD-0000000Afci-0XxO@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Panther Lake systems introduced an autonomous power gating feature for
the integrated Gigabit Ethernet in shutdown state (S5) state. As part of
it, the reset value of DPG_EN bit was changed to 1. Clear this bit after
performing hardware reset to avoid errors such as Tx/Rx hangs, or packet
loss/corruption.
Fixes: 0c9183ce61bc ("e1000e: Add support for the next LOM generation")
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Add new board type for Panther Lake devices for separating device-specific
features and flows.
Additionally, remove the deprecated device IDs 0x57B5 and 0x57B6, which
are not used by any existing devices.
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Avigail Dahan <avigailx.dahan@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
It may happen that VF spawned for E610 adapter has problem with setting
link up. This happens when ixgbevf supporting mailbox API 1.6 cooperates
with PF driver which doesn't support this version of API, and hence
doesn't support new approach for getting PF link data.
In that case VF asks PF to provide link data but as PF doesn't support
it, returns -EOPNOTSUPP what leads to early bail from link configuration
sequence.
Avoid such situation by using legacy VFLINKS approach whenever negotiated
API version is less than 1.6.
To reproduce the issue just create VF and set its link up - adapter must
be any from the E610 family, ixgbevf must support API 1.6 or higher while
ixgbevf must not.
Fixes: 53f0eb62b4d2 ("ixgbevf: fix getting link speed data for E610 devices")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Using get_cpu() in the tracepoint assignment causes an obvious preempt
count leak because nothing invokes put_cpu() to undo it:
softirq: huh, entered softirq 3 NET_RX with preempt_count 00000100, exited with 00000101?
This clearly has seen a lot of testing in the last 3+ years...
Use smp_processor_id() instead.
Fixes: 6d4d584a7ea8 ("i40e: Add i40e_napi_poll tracepoint")
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Since the conversion of ice to page pool, the ethtool loopback test
crashes:
BUG: kernel NULL pointer dereference, address: 000000000000000c
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 1100f1067 P4D 0
Oops: Oops: 0002 [#1] SMP NOPTI
CPU: 23 UID: 0 PID: 5904 Comm: ethtool Kdump: loaded Not tainted 6.19.0-0.rc7.260128g1f97d9dcf5364.49.eln154.x86_64 #1 PREEMPT(lazy)
Hardware name: [...]
RIP: 0010:ice_alloc_rx_bufs+0x1cd/0x310 [ice]
Code: 83 6c 24 30 01 66 41 89 47 08 0f 84 c0 00 00 00 41 0f b7 dc 48 8b 44 24 18 48 c1 e3 04 41 bb 00 10 00 00 48 8d 2c 18 8b 04 24 <89> 45 0c 41 8b 4d 00 49 d3 e3 44 3b 5c 24 24 0f 83 ac fe ff ff 44
RSP: 0018:ff7894738aa1f768 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000700 RDI: 0000000000000000
RBP: 0000000000000000 R08: ff16dcae79880200 R09: 0000000000000019
R10: 0000000000000001 R11: 0000000000001000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ff16dcae6c670000
FS: 00007fcf428850c0(0000) GS:ff16dcb149710000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000000c CR3: 0000000121227005 CR4: 0000000000773ef0
PKRU: 55555554
Call Trace:
<TASK>
ice_vsi_cfg_rxq+0xca/0x460 [ice]
ice_vsi_cfg_rxqs+0x54/0x70 [ice]
ice_loopback_test+0xa9/0x520 [ice]
ice_self_test+0x1b9/0x280 [ice]
ethtool_self_test+0xe5/0x200
__dev_ethtool+0x1106/0x1a90
dev_ethtool+0xbe/0x1a0
dev_ioctl+0x258/0x4c0
sock_do_ioctl+0xe3/0x130
__x64_sys_ioctl+0xb9/0x100
do_syscall_64+0x7c/0x700
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
It crashes because we have not initialized libeth for the rx ring.
Fix it by treating ICE_VSI_LB VSIs slightly more like normal PF VSIs and
letting them have a q_vector. It's just a dummy, because the loopback
test does not use interrupts, but it contains a napi struct that can be
passed to libeth_rx_fq_create() called from ice_vsi_cfg_rxq() ->
ice_rxq_pp_create().
Fixes: 93f53db9f9dc ("ice: switch to Page Pool")
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Fix IRDMA hardware initialization timeout (-110) after resume by
separating VSI-dependent configuration from RDMA resource allocation,
ensuring VSI is rebuilt before IRDMA accesses it.
After resume from suspend, IRDMA hardware initialization fails:
ice: IRDMA hardware initialization FAILED init_state=4 status=-110
Separate RDMA initialization into two phases:
1. ice_init_rdma() - Allocate resources only (no VSI/QoS access, no plug)
2. ice_rdma_finalize_setup() - Assign VSI/QoS info and plug device
This allows:
- ice_init_rdma() to stay in ice_resume() (mirrors ice_deinit_rdma()
in ice_suspend())
- VSI assignment deferred until after ice_vsi_rebuild() completes
- QoS info updated after ice_dcb_rebuild() completes
- Device plugged only when control queues, VSI, and DCB are all ready
Fixes: bc69ad74867db ("ice: avoid IRQ collision to fix init failure on ACPI S3 resume")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When deleting a flow rule using "ethtool -N <dev> delete <location>",
idpf_sideband_action_ena() incorrectly validates fsp->ring_cookie even
though ethtool doesn't populate this field for delete operations. The
uninitialized ring_cookie may randomly match RX_CLS_FLOW_DISC or
RX_CLS_FLOW_WAKE, causing validation to fail and preventing legitimate
rule deletions. Remove the unnecessary sideband action enable check and
ring_cookie validation during delete operations since action validation
is not required when removing existing rules.
Fixes: ada3e24b84a0 ("idpf: add flow steering support")
Signed-off-by: Sreedevi Joshi <sreedevi.joshi@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The code uses the vidx for the IRQ name but that doesn't match ethtool
reporting nor netdev naming, this makes it hard to tune the device and
associate queues with IRQs. Sequentially requesting irqs starting from
'0' makes the output consistent.
This commit changes the interrupt numbering but preserves the name
format, maintaining ABI compatibility. Existing tools relying on the old
numbering are already non-functional, as they lack a useful correlation
to the interrupts.
Before:
ethtool -L eth1 tx 1 combined 3
grep . /proc/irq/*/*idpf*/../smp_affinity_list
/proc/irq/67/idpf-Mailbox-0/../smp_affinity_list:0-55,112-167
/proc/irq/68/idpf-eth1-TxRx-1/../smp_affinity_list:0
/proc/irq/70/idpf-eth1-TxRx-3/../smp_affinity_list:1
/proc/irq/71/idpf-eth1-TxRx-4/../smp_affinity_list:2
/proc/irq/72/idpf-eth1-Tx-5/../smp_affinity_list:3
ethtool -S eth1 | grep -v ': 0'
NIC statistics:
tx_q-0_pkts: 1002
tx_q-1_pkts: 2679
tx_q-2_pkts: 1113
tx_q-3_pkts: 1192 <----- tx_q-3 vs idpf-eth1-Tx-5
rx_q-0_pkts: 1143
rx_q-1_pkts: 3172
rx_q-2_pkts: 1074
After:
ethtool -L eth1 tx 1 combined 3
grep . /proc/irq/*/*idpf*/../smp_affinity_list
/proc/irq/67/idpf-Mailbox-0/../smp_affinity_list:0-55,112-167
/proc/irq/68/idpf-eth1-TxRx-0/../smp_affinity_list:0
/proc/irq/70/idpf-eth1-TxRx-1/../smp_affinity_list:1
/proc/irq/71/idpf-eth1-TxRx-2/../smp_affinity_list:2
/proc/irq/72/idpf-eth1-Tx-3/../smp_affinity_list:3
ethtool -S eth1 | grep -v ': 0'
NIC statistics:
tx_q-0_pkts: 118
tx_q-1_pkts: 134
tx_q-2_pkts: 228
tx_q-3_pkts: 138 <--- tx_q-3 matches idpf-eth1-Tx-3
rx_q-0_pkts: 111
rx_q-1_pkts: 366
rx_q-2_pkts: 120
Fixes: d4d558718266 ("idpf: initialize interrupts and enable vport")
Signed-off-by: Brian Vazquez <brianvv@google.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
rss_data->rss_key needs to be nullified after it is freed.
Checks like "if (!rss_data->rss_key)" in the code could fail
if it is not nullified.
Tested: built and booted the kernel.
Fixes: 83f38f210b85 ("idpf: Fix RSS LUT NULL pointer crash on early ethtool operations")
Signed-off-by: Li Li <boolli@google.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In idpf_txq_group_alloc(), if any txq group's txqs failed to
allocate memory:
for (j = 0; j < tx_qgrp->num_txq; j++) {
tx_qgrp->txqs[j] = kzalloc(sizeof(*tx_qgrp->txqs[j]),
GFP_KERNEL);
if (!tx_qgrp->txqs[j])
goto err_alloc;
}
It would cause a NULL ptr kernel panic in idpf_txq_group_rel():
for (j = 0; j < txq_grp->num_txq; j++) {
if (flow_sch_en) {
kfree(txq_grp->txqs[j]->refillq);
txq_grp->txqs[j]->refillq = NULL;
}
kfree(txq_grp->txqs[j]);
txq_grp->txqs[j] = NULL;
}
[ 6.532461] BUG: kernel NULL pointer dereference, address: 0000000000000058
...
[ 6.534433] RIP: 0010:idpf_txq_group_rel+0xc9/0x110
...
[ 6.538513] Call Trace:
[ 6.538639] <TASK>
[ 6.538760] idpf_vport_queues_alloc+0x75/0x550
[ 6.538978] idpf_vport_open+0x4d/0x3f0
[ 6.539164] idpf_open+0x71/0xb0
[ 6.539324] __dev_open+0x142/0x260
[ 6.539506] netif_open+0x2f/0xe0
[ 6.539670] dev_open+0x3d/0x70
[ 6.539827] bond_enslave+0x5ed/0xf50
[ 6.540005] ? rcutree_enqueue+0x1f/0xb0
[ 6.540193] ? call_rcu+0xde/0x2a0
[ 6.540375] ? barn_get_empty_sheaf+0x5c/0x80
[ 6.540594] ? __kfree_rcu_sheaf+0xb6/0x1a0
[ 6.540793] ? nla_put_ifalias+0x3d/0x90
[ 6.540981] ? kvfree_call_rcu+0xb5/0x3b0
[ 6.541173] ? kvfree_call_rcu+0xb5/0x3b0
[ 6.541365] do_set_master+0x114/0x160
[ 6.541547] do_setlink+0x412/0xfb0
[ 6.541717] ? security_sock_rcv_skb+0x2a/0x50
[ 6.541931] ? sk_filter_trim_cap+0x7c/0x320
[ 6.542136] ? skb_queue_tail+0x20/0x50
[ 6.542322] ? __nla_validate_parse+0x92/0xe50
ro[o t t o6 .d5e4f2a5u4l0t]- ? security_capable+0x35/0x60
[ 6.542792] rtnl_newlink+0x95c/0xa00
[ 6.542972] ? __rtnl_unlock+0x37/0x70
[ 6.543152] ? netdev_run_todo+0x63/0x530
[ 6.543343] ? allocate_slab+0x280/0x870
[ 6.543531] ? security_capable+0x35/0x60
[ 6.543722] rtnetlink_rcv_msg+0x2e6/0x340
[ 6.543918] ? __pfx_rtnetlink_rcv_msg+0x10/0x10
[ 6.544138] netlink_rcv_skb+0x16a/0x1a0
[ 6.544328] netlink_unicast+0x20a/0x320
[ 6.544516] netlink_sendmsg+0x304/0x3b0
[ 6.544748] __sock_sendmsg+0x89/0xb0
[ 6.544928] ____sys_sendmsg+0x167/0x1c0
[ 6.545116] ? ____sys_recvmsg+0xed/0x150
[ 6.545308] ___sys_sendmsg+0xdd/0x120
[ 6.545489] ? ___sys_recvmsg+0x124/0x1e0
[ 6.545680] ? rcutree_enqueue+0x1f/0xb0
[ 6.545867] ? rcutree_enqueue+0x1f/0xb0
[ 6.546055] ? call_rcu+0xde/0x2a0
[ 6.546222] ? evict+0x286/0x2d0
[ 6.546389] ? rcutree_enqueue+0x1f/0xb0
[ 6.546577] ? kmem_cache_free+0x2c/0x350
[ 6.546784] __x64_sys_sendmsg+0x72/0xc0
[ 6.546972] do_syscall_64+0x6f/0x890
[ 6.547150] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 6.547393] RIP: 0033:0x7fc1a3347bd0
...
[ 6.551375] RIP: 0010:idpf_txq_group_rel+0xc9/0x110
...
[ 6.578856] Rebooting in 10 seconds..
We should skip deallocating txqs[j] if it is NULL in the first place.
Tested: with this patch, the kernel panic no longer appears.
Fixes: 1c325aac10a8 ("idpf: configure resources for TX queues")
Signed-off-by: Li Li <boolli@google.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
In idpf_rxq_group_alloc(), if rx_qgrp->splitq.bufq_sets failed to get
allocated:
rx_qgrp->splitq.bufq_sets = kcalloc(vport->num_bufqs_per_qgrp,
sizeof(struct idpf_bufq_set),
GFP_KERNEL);
if (!rx_qgrp->splitq.bufq_sets) {
err = -ENOMEM;
goto err_alloc;
}
idpf_rxq_group_rel() would attempt to deallocate it in
idpf_rxq_sw_queue_rel(), causing a kernel panic:
```
[ 7.967242] early-network-sshd-n-rexd[3148]: knetbase: Info: [ 8.127804] BUG: kernel NULL pointer dereference, address: 00000000000000c0
...
[ 8.129779] RIP: 0010:idpf_rxq_group_rel+0x101/0x170
...
[ 8.133854] Call Trace:
[ 8.133980] <TASK>
[ 8.134092] idpf_vport_queues_alloc+0x286/0x500
[ 8.134313] idpf_vport_open+0x4d/0x3f0
[ 8.134498] idpf_open+0x71/0xb0
[ 8.134668] __dev_open+0x142/0x260
[ 8.134840] netif_open+0x2f/0xe0
[ 8.135004] dev_open+0x3d/0x70
[ 8.135166] bond_enslave+0x5ed/0xf50
[ 8.135345] ? nla_put_ifalias+0x3d/0x90
[ 8.135533] ? kvfree_call_rcu+0xb5/0x3b0
[ 8.135725] ? kvfree_call_rcu+0xb5/0x3b0
[ 8.135916] do_set_master+0x114/0x160
[ 8.136098] do_setlink+0x412/0xfb0
[ 8.136269] ? security_sock_rcv_skb+0x2a/0x50
[ 8.136509] ? sk_filter_trim_cap+0x7c/0x320
[ 8.136714] ? skb_queue_tail+0x20/0x50
[ 8.136899] ? __nla_validate_parse+0x92/0xe50
[ 8.137112] ? security_capable+0x35/0x60
[ 8.137304] rtnl_newlink+0x95c/0xa00
[ 8.137483] ? __rtnl_unlock+0x37/0x70
[ 8.137664] ? netdev_run_todo+0x63/0x530
[ 8.137855] ? allocate_slab+0x280/0x870
[ 8.138044] ? security_capable+0x35/0x60
[ 8.138235] rtnetlink_rcv_msg+0x2e6/0x340
[ 8.138431] ? __pfx_rtnetlink_rcv_msg+0x10/0x10
[ 8.138650] netlink_rcv_skb+0x16a/0x1a0
[ 8.138840] netlink_unicast+0x20a/0x320
[ 8.139028] netlink_sendmsg+0x304/0x3b0
[ 8.139217] __sock_sendmsg+0x89/0xb0
[ 8.139399] ____sys_sendmsg+0x167/0x1c0
[ 8.139588] ? ____sys_recvmsg+0xed/0x150
[ 8.139780] ___sys_sendmsg+0xdd/0x120
[ 8.139960] ? ___sys_recvmsg+0x124/0x1e0
[ 8.140152] ? rcutree_enqueue+0x1f/0xb0
[ 8.140341] ? rcutree_enqueue+0x1f/0xb0
[ 8.140528] ? call_rcu+0xde/0x2a0
[ 8.140695] ? evict+0x286/0x2d0
[ 8.140856] ? rcutree_enqueue+0x1f/0xb0
[ 8.141043] ? kmem_cache_free+0x2c/0x350
[ 8.141236] __x64_sys_sendmsg+0x72/0xc0
[ 8.141424] do_syscall_64+0x6f/0x890
[ 8.141603] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 8.141841] RIP: 0033:0x7f2799d21bd0
...
[ 8.149905] Kernel panic - not syncing: Fatal exception
[ 8.175940] Kernel Offset: 0xf800000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[ 8.176425] Rebooting in 10 seconds..
```
Tested: With this patch, the kernel panic no longer appears.
Fixes: 95af467d9a4e ("idpf: configure resources for RX queues")
Signed-off-by: Li Li <boolli@google.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently, in idpf_wait_for_sw_marker_completion(), when an
IDPF_TXD_COMPLT_SW_MARKER packet is found, the routine breaks out of
the for loop and does not increment the next_to_clean counter. This
causes the subsequent NAPI polls to run into the same
IDPF_TXD_COMPLT_SW_MARKER packet again and print out the following:
[ 23.261341] idpf 0000:05:00.0 eth1: Unknown TX completion type: 5
Instead, we should increment next_to_clean regardless when an
IDPF_TXD_COMPLT_SW_MARKER packet is found.
Tested: with the patch applied, we do not see the errors above from NAPI
polls anymore.
Fixes: 9d39447051a0 ("idpf: remove SW marker handling from NAPI")
Signed-off-by: Li Li <boolli@google.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Move it up to avoid placing it in both the error and success paths.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260224014141.352642-1-rosenp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We recently added GRO stats to bnxt, which are maintained
by the driver. Having "err" in the name of the struct for
ring stats no longer makes sense (as pointed out by Michael,
see Link).
Rename them to "drv" stats, as these are all maintained
by the driver (even if partially based on info from descriptors).
Michael suggested calling these misc, happy to go back to
that. IMHO "drv" is a bit more meaningful that "misc".
Pure rename using sed, no functional changes.
Link: https://lore.kernel.org/CACKFLimgibJ0qkM1AacZVh8MKKy-pE_AAc4KPKZ7GUqebmXW9A@mail.gmail.com
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260223203702.4137801-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bond_start_xmit() spends some cycles in is_netpoll_tx_blocked():
if (unlikely(is_netpoll_tx_blocked(dev)))
return NETDEV_TX_BUSY;
because of the "pushf;pop reg" sequence (aka irqs_disabled()).
Let's swap the conditions in is_netpoll_tx_blocked() and
convert netpoll_block_tx to a static key.
Before:
1.23 │ mov %gs:0x28,%rax
1.24 │ mov %rax,0x18(%rsp)
29.45 │ pushfq
0.50 │ pop %rax
0.47 │ test $0x200,%eax
│ ↓ je 1b4
0.49 │ 32: lea 0x980(%rsi),%rbx
After:
0.72 │ mov %gs:0x28,%rax
0.81 │ mov %rax,0x18(%rsp)
0.82 │ nop
2.77 │ 2a: lea 0x980(%rsi),%rbx
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260223230749.2376145-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When stmmac_init_timestamping() is called, it clears the receive and
transmit path booleans that allow timestamps to be read. These are
never re-initialised until after userspace requests timestamping
features to be enabled.
However, our copy of the timestamp configuration is not cleared, which
means we return the old configuration to userspace when requested.
This is inconsistent. Fix this by clearing the timestamp configuration.
Fixes: d6228b7cdd6e ("net: stmmac: implement the SIOCGHWTSTAMP ioctl")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/E1vuUu4-0000000Afea-0j9B@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Set the RGMII link clock using the set_clk_tx_rate() method rather than
coding it into the .fix_mac_speed() method. This simplifies ethqos's
ethqos_fix_mac_speed().
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSLF-0000000ASci-42kh@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move the SerDes speed configuration to phylink's .mac_finish() stage
so that the SerDes is appropriately configured for the interface mode
prior to the link coming up.
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSLA-0000000AScc-3RFf@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
qcom-ethqos currently forces inband to be enabled for the Cisco SGMII
speeds (1G, 100M and 10M) but not for 2500BASE-X (2.5G).
Rather than using the speed to determine the forced inband state, use
phylink's PHY interface mode which will switch between SGMII for the
10M, 100M and 1G speeds, and 2500BASE-X for 2.5G.
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSL5-0000000AScX-2wuM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass the current phylink phy interface mode to the RGMII and "SGMII"
configuration functions.
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSL0-0000000AScM-2TN0@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass the current interface mode reported by phylink into the
fix_mac_speed() method. This will be used by qcom-ethqos for its
"SGMII" configuration.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSKv-0000000AScG-1zv6@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Loopback is enabled to allow the dwmac soft reset to succeed. This
is enabled when clocks are enabled in ethqos_clks_config(), which
happens at driver probe and runtime PM resume - e.g. when the
network device is administratively brought up.
Currently, the loopback is disabled when the link comes up (via
.mac_link_up() calling this driver's .fix_mac_speed().)
Move the qcom_ethqos_set_sgmii_loopback() call which disables
loopback from ethqos_fix_mac_speed() into ethqos' SerDes specific
.mac_finish() method so that loopback is disabled a little earlier
after reset has completed, and dwmac setup has completed.
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSKq-0000000AScA-1Wh3@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ethqos_set_func_clk_en() configures both SGMII loopback and the RGMII
functional clock setting. qcom_ethqos_set_sgmii_loopback() is only
called from within ethqos_set_func_clk_en(), and checks for
PHY_INTERFACE_MODE_2500BASEX.
Move qcom_ethqos_set_sgmii_loopback() to the callers of
ethqos_set_func_clk_en() except for ethqos_configure_rgmii() where we
know that ethqos->phy_mode will not be PHY_INTERFACE_MODE_2500BASEX.
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSKl-0000000ASc1-18ka@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ethqos_configure*() family of functions always return zero, and the
return value is never checked. Change the int return type to void.
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSKg-0000000ASbv-0iWL@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert the register field values to something more human readable.
For example, using (BIT(29) | BIT(27)) to update a register field that
consists of bits 29:27 is an obfuscated way of writing decimal 5 for
this field. The comment above needs to explain that this value is 5.
Worse still is BIT(12) | GENMASK(9, 8), which is used to hide the
decimal value 19 for the bitfield 16:8.
Fix these, and a few others by using FIELD_PREP(). While it means we
have bare numeric constants, this is more preferable than having the
obfuscation.
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSKa-0000000ASbo-2zQg@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Rename the "por" and "num_por" members to indicate that they are for
RGMII mode only as ethqos_configure_rgmii() is the only place that the
values are programmed into the registers.
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSKV-0000000ASbg-28JK@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Report supported media types based on the VIC subsystem ID so ethtool
reflects the hardware capabilities.
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20260223-enic-cscwi36355-v2-2-63488194a974@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add VIC subsystem id for 12xx, 13xx, 14xx and 15xxx series
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20260223-enic-cscwi36355-v2-1-63488194a974@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No pci_enable_ptm() callers supply the "granularity" pointer where the
clock granularity would be returned.
Drop the unused pci_enable_ptm() parameter.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[bhelgaas: commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://patch.msgid.link/20260224111044.3487873-5-mika.westerberg@linux.intel.com
|
|
Wire phylink_ethtool_nway_reset() as the .nway_reset ethtool operation,
allowing userspace to restart PHY autonegotiation via 'ethtool -r'.
Signed-off-by: Nicolai Buchwitz <nb@tipi-net.de>
Reviewed-by: Russel King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260223085442.42852-1-nb@tipi-net.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is an AB-BA deadlock when both LEDS_TRIGGER_NETDEV and
LED_TRIGGER_PHY are enabled:
[ 1362.049207] [<8054e4b8>] led_trigger_register+0x5c/0x1fc <-- Trying to get lock "triggers_list_lock" via down_write(&triggers_list_lock);
[ 1362.054536] [<80662830>] phy_led_triggers_register+0xd0/0x234
[ 1362.060329] [<8065e200>] phy_attach_direct+0x33c/0x40c
[ 1362.065489] [<80651fc4>] phylink_fwnode_phy_connect+0x15c/0x23c
[ 1362.071480] [<8066ee18>] mtk_open+0x7c/0xba0
[ 1362.075849] [<806d714c>] __dev_open+0x280/0x2b0
[ 1362.080384] [<806d7668>] __dev_change_flags+0x244/0x24c
[ 1362.085598] [<806d7698>] dev_change_flags+0x28/0x78
[ 1362.090528] [<807150e4>] dev_ioctl+0x4c0/0x654 <-- Hold lock "rtnl_mutex" by calling rtnl_lock();
[ 1362.094985] [<80694360>] sock_ioctl+0x2f4/0x4e0
[ 1362.099567] [<802e9c4c>] sys_ioctl+0x32c/0xd8c
[ 1362.104022] [<80014504>] syscall_common+0x34/0x58
Here LED_TRIGGER_PHY is registering LED triggers during phy_attach
while holding RTNL and then taking triggers_list_lock.
[ 1362.191101] [<806c2640>] register_netdevice_notifier+0x60/0x168 <-- Trying to get lock "rtnl_mutex" via rtnl_lock();
[ 1362.197073] [<805504ac>] netdev_trig_activate+0x194/0x1e4
[ 1362.202490] [<8054e28c>] led_trigger_set+0x1d4/0x360 <-- Hold lock "triggers_list_lock" by down_read(&triggers_list_lock);
[ 1362.207511] [<8054eb38>] led_trigger_write+0xd8/0x14c
[ 1362.212566] [<80381d98>] sysfs_kf_bin_write+0x80/0xbc
[ 1362.217688] [<8037fcd8>] kernfs_fop_write_iter+0x17c/0x28c
[ 1362.223174] [<802cbd70>] vfs_write+0x21c/0x3c4
[ 1362.227712] [<802cc0c4>] ksys_write+0x78/0x12c
[ 1362.232164] [<80014504>] syscall_common+0x34/0x58
Here LEDS_TRIGGER_NETDEV is being enabled on an LED. It first takes
triggers_list_lock and then RTNL. A classical AB-BA deadlock.
phy_led_triggers_registers() does not require the RTNL, it does not
make any calls into the network stack which require protection. There
is also no requirement the PHY has been attached to a MAC, the
triggers only make use of phydev state. This allows the call to
phy_led_triggers_registers() to be placed elsewhere. PHY probe() and
release() don't hold RTNL, so solving the AB-BA deadlock.
Reported-by: Shiji Yang <yangshiji66@outlook.com>
Closes: https://lore.kernel.org/all/OS7PR01MB13602B128BA1AD3FA38B6D1FFBC69A@OS7PR01MB13602.jpnprd01.prod.outlook.com/
Fixes: 06f502f57d0d ("leds: trigger: Introduce a NETDEV trigger")
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://patch.msgid.link/20260222152601.1978655-1-andrew@lunn.ch
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
pegasus_probe() fills URBs with hardcoded endpoint pipes without
verifying the endpoint descriptors:
- usb_rcvbulkpipe(dev, 1) for RX data
- usb_sndbulkpipe(dev, 2) for TX data
- usb_rcvintpipe(dev, 3) for status interrupts
A malformed USB device can present these endpoints with transfer types
that differ from what the driver assumes.
Add a pegasus_usb_ep enum for endpoint numbers, replacing magic
constants throughout. Add usb_check_bulk_endpoints() and
usb_check_int_endpoints() calls before any resource allocation to
verify endpoint types before use, rejecting devices with mismatched
descriptors at probe time, and avoid triggering assertion.
Similar fix to
- commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking")
- commit 9e7021d2aeae ("net: usb: catc: enable basic endpoint checking")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260222050633.410165-1-n7l8m4@u.northwestern.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
msg passed to netconsole from the console subsystem is not guaranteed
to be nul-terminated. Before recent
commit 7eab73b18630 ("netconsole: convert to NBCON console infrastructure")
the message would be placed in printk_shared_pbufs, a static global
buffer, so KASAN had harder time catching OOB accesses. Now we see:
printk: console [netcon_ext0] enabled
BUG: KASAN: slab-out-of-bounds in string+0x1f7/0x240
Read of size 1 at addr ffff88813b6d4c00 by task pr/netcon_ext0/594
CPU: 65 UID: 0 PID: 594 Comm: pr/netcon_ext0 Not tainted 6.19.0-11754-g4246fd6547c9
Call Trace:
kasan_report+0xe4/0x120
string+0x1f7/0x240
vsnprintf+0x655/0xba0
scnprintf+0xba/0x120
netconsole_write+0x3fe/0xa10
nbcon_emit_next_record+0x46e/0x860
nbcon_kthread_func+0x623/0x750
Allocated by task 1:
nbcon_alloc+0x1ea/0x450
register_console+0x26b/0xe10
init_netconsole+0xbb0/0xda0
The buggy address belongs to the object at ffff88813b6d4000
which belongs to the cache kmalloc-4k of size 4096
The buggy address is located 0 bytes to the right of
allocated 3072-byte region [ffff88813b6d4000, ffff88813b6d4c00)
Fixes: c62c0a17f9b7 ("netconsole: Append kernel version to message")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260219195021.2099699-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When the FarSync T-series card is being detached, the fst_card_info is
deallocated in fst_remove_one(). However, the fst_tx_task or fst_int_task
may still be running or pending, leading to use-after-free bugs when the
already freed fst_card_info is accessed in fst_process_tx_work_q() or
fst_process_int_work_q().
A typical race condition is depicted below:
CPU 0 (cleanup) | CPU 1 (tasklet)
| fst_start_xmit()
fst_remove_one() | tasklet_schedule()
unregister_hdlc_device()|
| fst_process_tx_work_q() //handler
kfree(card) //free | do_bottom_half_tx()
| card-> //use
The following KASAN trace was captured:
==================================================================
BUG: KASAN: slab-use-after-free in do_bottom_half_tx+0xb88/0xd00
Read of size 4 at addr ffff88800aad101c by task ksoftirqd/3/32
...
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_report+0xcb/0x5d0
? do_bottom_half_tx+0xb88/0xd00
kasan_report+0xb8/0xf0
? do_bottom_half_tx+0xb88/0xd00
do_bottom_half_tx+0xb88/0xd00
? _raw_spin_lock_irqsave+0x85/0xe0
? __pfx__raw_spin_lock_irqsave+0x10/0x10
? __pfx___hrtimer_run_queues+0x10/0x10
fst_process_tx_work_q+0x67/0x90
tasklet_action_common+0x1fa/0x720
? hrtimer_interrupt+0x31f/0x780
handle_softirqs+0x176/0x530
__irq_exit_rcu+0xab/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
...
Allocated by task 41 on cpu 3 at 72.330843s:
kasan_save_stack+0x24/0x50
kasan_save_track+0x17/0x60
__kasan_kmalloc+0x7f/0x90
fst_add_one+0x1a5/0x1cd0
local_pci_probe+0xdd/0x190
pci_device_probe+0x341/0x480
really_probe+0x1c6/0x6a0
__driver_probe_device+0x248/0x310
driver_probe_device+0x48/0x210
__device_attach_driver+0x160/0x320
bus_for_each_drv+0x101/0x190
__device_attach+0x198/0x3a0
device_initial_probe+0x78/0xa0
pci_bus_add_device+0x81/0xc0
pci_bus_add_devices+0x7e/0x190
enable_slot+0x9b9/0x1130
acpiphp_check_bridge.part.0+0x2e1/0x460
acpiphp_hotplug_notify+0x36c/0x3c0
acpi_device_hotplug+0x203/0xb10
acpi_hotplug_work_fn+0x59/0x80
...
Freed by task 41 on cpu 1 at 75.138639s:
kasan_save_stack+0x24/0x50
kasan_save_track+0x17/0x60
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x43/0x70
kfree+0x135/0x410
fst_remove_one+0x2ca/0x540
pci_device_remove+0xa6/0x1d0
device_release_driver_internal+0x364/0x530
pci_stop_bus_device+0x105/0x150
pci_stop_and_remove_bus_device+0xd/0x20
disable_slot+0x116/0x260
acpiphp_disable_and_eject_slot+0x4b/0x190
acpiphp_hotplug_notify+0x230/0x3c0
acpi_device_hotplug+0x203/0xb10
acpi_hotplug_work_fn+0x59/0x80
...
The buggy address belongs to the object at ffff88800aad1000
which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 28 bytes inside of
freed 1024-byte region
The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xaad0
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
flags: 0x100000000000040(head|node=0|zone=1)
page_type: f5(slab)
raw: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000
raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 0100000000000040 ffff888007042dc0 dead000000000122 0000000000000000
head: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 0100000000000003 ffffea00002ab401 00000000ffffffff 00000000ffffffff
head: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88800aad0f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88800aad0f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88800aad1000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88800aad1080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88800aad1100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Fix this by ensuring that both fst_tx_task and fst_int_task are properly
canceled before the fst_card_info is released. Add tasklet_kill() in
fst_remove_one() to synchronize with any pending or running tasklets.
Since unregister_hdlc_device() stops data transmission and reception,
and fst_disable_intr() prevents further interrupts, it is appropriate
to place tasklet_kill() after these calls.
The bugs were identified through static analysis. To reproduce the issue
and validate the fix, a FarSync T-series card was simulated in QEMU and
delays(e.g., mdelay()) were introduced within the tasklet handler to
increase the likelihood of triggering the race condition.
Fixes: 2f623aaf9f31 ("net: farsync: Fix kmemleak when rmmods farsync")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260219124637.72578-1-duoming@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
