| Age | Commit message (Collapse) | Author |
|---|
|
Use pci_name(pdev) for the per-device debugfs directory instead of
hardcoded "0" for PFs and pci_slot_name(pdev->slot) for VFs. The
previous approach had two issues:
1. pci_slot_name() dereferences pdev->slot, which can be NULL for VFs
in environments like generic VFIO passthrough or nested KVM,
causing a NULL pointer dereference.
2. Multiple PFs would all use "0", and VFs across different PCI
domains or buses could share the same slot name, leading to
-EEXIST errors from debugfs_create_dir().
pci_name(pdev) returns the unique BDF address, is always valid, and is
unique across the system.
Fixes: 6607c17c6c5e ("net: mana: Enable debugfs files for MANA device")
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260408081224.302308-2-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the legacy ethtool statistics interface (get_sset_count,
get_strings, get_ethtool_stats) to expose hardware counters not
available through standard kernel stats APIs.
Ex:
a) Per-queue ring stats
rxq0_ucast_packets: 2
rxq0_mcast_packets: 0
rxq0_bcast_packets: 15
rxq0_ucast_bytes: 120
rxq0_mcast_bytes: 0
rxq0_bcast_bytes: 900
txq0_ucast_packets: 0
txq0_mcast_packets: 0
txq0_bcast_packets: 0
txq0_ucast_bytes: 0
txq0_mcast_bytes: 0
txq0_bcast_bytes: 0
b) Per-queue TPA(LRO/GRO) stats
rxq4_tpa_eligible_pkt: 0
rxq4_tpa_eligible_bytes: 0
rxq4_tpa_pkt: 0
rxq4_tpa_bytes: 0
rxq4_tpa_errors: 0
rxq4_tpa_events: 0
c) Port level stats
rxp_good_vlan_frames: 0
rxp_mtu_err_frames: 0
rxp_tagged_frames: 0
rxp_double_tagged_frames: 0
rxp_pfc_ena_frames_pri0: 0
rxp_pfc_ena_frames_pri1: 0
rxp_pfc_ena_frames_pri2: 0
rxp_pfc_ena_frames_pri3: 0
rxp_pfc_ena_frames_pri4: 0
rxp_pfc_ena_frames_pri5: 0
rxp_pfc_ena_frames_pri6: 0
rxp_pfc_ena_frames_pri7: 0
rxp_eee_lpi_events: 0
rxp_eee_lpi_duration: 0
rxp_runt_bytes: 0
rxp_runt_frames: 0
txp_good_vlan_frames: 0
txp_jabber_frames: 0
txp_fcs_err_frames: 0
txp_pfc_ena_frames_pri0: 0
txp_pfc_ena_frames_pri1: 0
txp_pfc_ena_frames_pri2: 0
txp_pfc_ena_frames_pri3: 0
txp_pfc_ena_frames_pri4: 0
txp_pfc_ena_frames_pri5: 0
txp_pfc_ena_frames_pri6: 0
txp_pfc_ena_frames_pri7: 0
txp_eee_lpi_events: 0
txp_eee_lpi_duration: 0
txp_xthol_frames: 0
d) Per-priority stats
rx_bytes_pri0: 4182650
rx_bytes_pri1: 4182650
rx_bytes_pri2: 4182650
rx_bytes_pri3: 4182650
rx_bytes_pri4: 4182650
rx_bytes_pri5: 4182650
rx_bytes_pri6: 4182650
rx_bytes_pri7: 4182650
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Link: https://patch.msgid.link/20260406180420.279470-11-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement netdev_stat_ops to provide standardized per-queue
statistics via the Netlink API.
Below is the description of the hardware drop counters:
rx-hw-drop-overruns: Packets dropped by HW due to resource limitations
(e.g., no BDs available in the host ring).
rx-hw-drops: Total packets dropped by HW (sum of overruns and error
drops).
tx-hw-drop-errors: Packets dropped by HW because they were invalid or
malformed.
tx-hw-drops: Total packets dropped by HW (sum of resource limitations
and error drops).
The implementation was verified using the ynl tool:
./tools/net/ynl/pyynl/cli.py --spec \
Documentation/netlink/specs/netdev.yaml --dump qstats-get --json \
'{"ifindex":14, "scope":"queue"}'
[{'ifindex': 14, 'queue-id': 0, 'queue-type': 'rx', 'rx-bytes': 758,
'rx-hw-drop-overruns': 0, 'rx-hw-drops': 0, 'rx-packets': 11},
{'ifindex': 14, 'queue-id': 1, 'queue-type': 'rx', 'rx-bytes': 0,
'rx-hw-drop-overruns': 0, 'rx-hw-drops': 0, 'rx-packets': 0},
{'ifindex': 14, 'queue-id': 0, 'queue-type': 'tx', 'tx-bytes': 0,
'tx-hw-drop-errors': 0, 'tx-hw-drops': 0, 'tx-packets': 0},
{'ifindex': 14, 'queue-id': 1, 'queue-type': 'tx', 'tx-bytes': 0,
'tx-hw-drop-errors': 0, 'tx-hw-drops': 0, 'tx-packets': 0},
{'ifindex': 14, 'queue-id': 2, 'queue-type': 'tx', 'tx-bytes': 810,
'tx-hw-drop-errors': 0, 'tx-hw-drops': 0, 'tx-packets': 10},]
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Link: https://patch.msgid.link/20260406180420.279470-10-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the ndo_get_stats64 callback to report aggregate network
statistics. The driver gathers these by accumulating the per-ring
counters into the provided rtnl_link_stats64 structure.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Link: https://patch.msgid.link/20260406180420.279470-9-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use the timer to schedule periodic stats collection via
the workqueue when the link is up. Fetch fresh counters from
hardware via DMA and accumulate them into 64-bit software
shadows, handling wrap-around for counters narrower than
64 bits.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rahul Gupta <rahul-rg.gupta@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
Link: https://patch.msgid.link/20260406180420.279470-8-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement the hardware-level statistics foundation and modern structured
ethtool operations.
1. Infrastructure: Add HWRM firmware wrappers (FUNC_QSTATS_EXT,
PORT_QSTATS_EXT, and PORT_QSTATS) to query ring and port counters.
2. Structured ops: Implement .get_eth_phy_stats, .get_eth_mac_stats,
.get_eth_ctrl_stats, .get_pause_stats, and .get_rmon_stats.
Stats are initially reported as 0; accumulation logic is added
in a subsequent patch.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Link: https://patch.msgid.link/20260406180420.279470-7-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Register for firmware asynchronous events, including link-status,
link-speed, and PHY configuration changes. Upon event reception,
re-query the PHY and update ethtool settings accordingly.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
Link: https://patch.msgid.link/20260406180420.279470-6-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement .get_pauseparam and .set_pauseparam to support flow control
configuration. This allows reporting and setting of autoneg, RX pause,
and TX pause states.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Link: https://patch.msgid.link/20260406180420.279470-5-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add get/set_link_ksettings, get_link, and nway_reset support.
Report supported, advertised, and link-partner speeds across NRZ,
PAM4, and PAM4-112 signaling modes. Enable lane count reporting.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Link: https://patch.msgid.link/20260406180420.279470-4-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Query PHY capabilities and supported speeds from firmware,
retrieve current link state (speed, duplex, pause, FEC),
and log the information. Seed initial link state during probe.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
Link: https://patch.msgid.link/20260406180420.279470-3-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a dedicated single-thread workqueue and a timer for each PF
to drive deferred slow-path work such as link event handling and
stats collection. The timer is stopped via timer_delete_sync()
when interrupts are disabled and restarted on open.
While the close path stops the timer to prevent new tasks from
being scheduled, the sp_task and workqueue are preserved to
maintain state continuity. Final draining and destruction of
the workqueue are handled during PCI remove.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
Link: https://patch.msgid.link/20260406180420.279470-2-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Wire in the SW USO path added in preceding commits when hardware USO is
not possible.
When a GSO skb with SKB_GSO_UDP_L4 arrives and the NIC lacks HW USO
capability, redirect to bnxt_sw_udp_gso_xmit() which handles software
segmentation into individual UDP frames submitted directly to the TX
ring.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-10-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Update __bnxt_tx_int and bnxt_free_one_tx_ring_skbs to handle SW GSO
segments:
- MID segments: adjust tx_pkts/tx_bytes accounting and skip skb free
(the skb is shared across all segments and freed only once)
- LAST segments: call tso_dma_map_complete() to tear down the IOVA
mapping if one was used. On the fallback path, payload DMA unmapping
is handled by the existing per-BD dma_unmap_len walk.
Both MID and LAST completions advance tx_inline_cons to release the
segment's inline header slot back to the ring.
is_sw_gso is initialized to zero, so the new code paths are not run.
Add logic for feature advertisement and guardrails for ring sizing.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-9-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement bnxt_sw_udp_gso_xmit() using the core tso_dma_map API and
the pre-allocated TX inline buffer for per-segment headers.
The xmit path:
1. Calls tso_start() to initialize TSO state
2. Stack-allocates a tso_dma_map and calls tso_dma_map_init() to
DMA-map the linear payload and all frags upfront.
3. For each segment:
- Copies and patches headers via tso_build_hdr() into the
pre-allocated tx_inline_buf (DMA-synced per segment)
- Counts payload BDs via tso_dma_map_count()
- Emits long BD (header) + ext BD + payload BDs
- Payload BDs use tso_dma_map_next() which yields (dma_addr,
chunk_len, mapping_len) tuples.
Header BDs set dma_unmap_len=0 since the inline buffer is pre-allocated
and unmapped only at ring teardown.
Completion state is updated by calling tso_dma_map_completion_save() for
the last segment.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-8-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add bnxt_gso.c and bnxt_gso.h with a stub bnxt_sw_udp_gso_xmit()
function, SW USO constants (BNXT_SW_USO_MAX_SEGS,
BNXT_SW_USO_MAX_DESCS), and the is_sw_gso field in bnxt_sw_tx_bd
with BNXT_SW_GSO_MID/LAST markers.
The full SW USO implementation will be added in a future commit.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-7-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add per-ring pre-allocated inline buffer fields (tx_inline_buf,
tx_inline_dma, tx_inline_size) to bnxt_tx_ring_info and helpers to
allocate and free them. A producer and consumer (tx_inline_prod,
tx_inline_cons) are added to track which slot(s) of the inline buffer
are in-use.
The inline buffer will be used by the SW USO path for pre-allocated,
pre-DMA-mapped per-segment header copies. In the future, this
could be extended to support TX copybreak.
Allocation helper is marked __maybe_unused in this commit because it
will be wired in later.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-6-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Store the DMA mapping length in each TX buffer descriptor via
dma_unmap_len_set at submit time, and use dma_unmap_len at completion
time.
This is a no-op for normal packets but prepares for software USO,
where header BDs set dma_unmap_len to 0 because the header buffer
is unmapped collectively rather than per-segment.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-5-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Factor out some code to setup tx_bd_exts into a helper function. This
helper will be used by SW USO implementation in the following commits.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-4-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Export bnxt_xmit_get_cfa_action so that it can be used in future commits
which add software USO support to bnxt.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260408230607.2019402-3-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When userspace reads a single mode netkit device via RTM_GETLINK,
it receives IFLA_NETKIT_SCRUB=NETKIT_SCRUB_DEFAULT attribute from
netkit_fill_info(). If that attribute is echoed back to recreate
the device, the seen_scrub presence check in netkit_new_link()
causes creation to fail with -EOPNOTSUPP. Since it has no meaning
for single devices at this point, just don't dump it.
Fixes: 481038960538 ("netkit: Add single device mode for netkit")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20260410072334.548232-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The variable chip_rev stores the value read from the FPGA_REV
register and represents the FPGA revision. Rename it to fpga_rev
to better reflect its meaning.
No functional change intended.
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Link: https://patch.msgid.link/20260410085710.9246-1-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2026-04-09
Johan Hovold's patch fixes the a devres lifetime in the ucan driver.
The last patch is by Samuel Page and fixes a use-after-free in
raw_rcv() in the CAN_RAW protocol.
* tag 'linux-can-fixes-for-7.0-20260409' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: raw: fix ro->uniq use-after-free in raw_rcv()
can: ucan: fix devres lifetime
====================
Link: https://patch.msgid.link/20260409165942.588421-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Final updates, notably:
- crypto: move Michael MIC code into wireless (only)
- mac80211:
- multi-link 4-addr support
- NAN data support (but no drivers yet)
- ath10k: DT quirk to make it work on some devices
- ath12k: IPQ5424 support
- rtw89: USB improvements for performance
* tag 'wireless-next-2026-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (124 commits)
wifi: cfg80211: Explicitly include <linux/export.h> in michael-mic.c
wifi: ath10k: Add device-tree quirk to skip host cap QMI requests
dt-bindings: wireless: ath10k: Add quirk to skip host cap QMI requests
crypto: Remove michael_mic from crypto_shash API
wifi: ipw2x00: Use michael_mic() from cfg80211
wifi: ath12k: Use michael_mic() from cfg80211
wifi: ath11k: Use michael_mic() from cfg80211
wifi: mac80211, cfg80211: Export michael_mic() and move it to cfg80211
wifi: ipw2x00: Rename michael_mic() to libipw_michael_mic()
wifi: libertas_tf: refactor endpoint lookup
wifi: libertas: refactor endpoint lookup
wifi: at76c50x: refactor endpoint lookup
wifi: ath12k: Enable IPQ5424 WiFi device support
wifi: ath12k: Add CE remap hardware parameters for IPQ5424
wifi: ath12k: add ath12k_hw_regs for IPQ5424
wifi: ath12k: add ath12k_hw_version_map entry for IPQ5424
wifi: ath12k: Add ath12k_hw_params for IPQ5424
dt-bindings: net: wireless: add ath12k wifi device IPQ5424
wifi: ath10k: fix station lookup failure during disconnect
wifi: ath12k: Create symlink for each radio in a wiphy
...
====================
Link: https://patch.msgid.link/20260410064703.735099-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Under high stress, we spend a lot of time cloning skbs,
then acquiring a spinlock, then freeing the clone because
the queue is full.
Add a shortcut to avoid these costs under pressure, as we did
in macvlan with commit 0d5dc1d7aad1 ("macvlan: avoid spinlock
contention in macvlan_broadcast_enqueue()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260409085238.1122947-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Reduce indentation level, and add a likely() clause
as we expect to process more unicast packets than multicast ones.
No functional change, this eases the following patch review.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260409085238.1122947-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Save the current mode of flow control, and enhance the statistics of
pause frames.
The received pause frames are divided into XON and XOFF to be counted.
And due to the hardware defect of SP devices, XON packets cannot be
trasmitted correctly, so Tx XON pause is disabled by default for those
devices.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260407025616.33652-10-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The WX_PX_MPRC registers are not clear-on-read hardware counters. The
previous implementation directly read and accumulated these 32-bit values
into a 64-bit software counter. Now implement a rd32_wrap() helper
function to calculate the delta counter to correct the statistic.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260407025616.33652-9-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Hardware statistics should be updated periodically in the watchdog to
prevent 32-bit registers from overflowing. This is also required for the
upcoming pause frame accounting logic, which relies on regular statistics
sampling.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260407025616.33652-8-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When removing the device, timer_delete_sync(&wx->service_timer) is
called in .ndo_stop() after cancel_work_sync(&wx->service_task). This
may cause new work to be queued after device down.
Move unregister_netdev() before cancel_work_sync(), and use
timer_shutdown_sync() to prevent the timer from being re-armed.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260407025616.33652-7-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since function ops wx->setup_tc() is set in txgbe and ngbe,
ethtool_ops.set_channels can be implemented in libwx to reduce
duplicated code.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260407025616.33652-6-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace the busy-wait loop using test_and_set_bit(WX_STATE_RESETTING)
with a proper per-device mutex to serialize reset operations.
The reset flag is reserved for other code paths (like watchdog), which
need tocheck if a reset is in process.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260407025616.33652-5-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
NGBE_NCSI_SUP and NGBE_NCSI_MASK are duplicate-defined, they can be
replaced by the macros defined in libwx. Just remove them.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260407025616.33652-4-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove duplicate-defined register macros, move the WOL implementation to
the library module. So that the WOL functions can be reused in txgbe
later.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20260407025616.33652-3-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netdev->ethtool->wol_enabled is set in ethtool core code, so remove the
redundant setting in ngbe_set_wol().
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260407025616.33652-2-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The J722S CPSW3G is mostly identical to the AM64's, but additionally
supports SGMII.
Signed-off-by: Nora Schiffer <nora.schiffer@ew.tq-group.com>
Link: https://patch.msgid.link/6118e81358d47f455e4c1dbddf3ece6f3329e184.1775558273.git.nora.schiffer@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
iavf_ethtool.c contains 31 kernel-doc comment blocks using the legacy
`**/` terminator instead of the correct single `*/`. Two function
headers also use a colon separator (`iavf_get_channels:`,
`iavf_set_channels:`) instead of the ` - ` dash required by kernel-doc.
Additionally several comments embed their return-value descriptions in
the body paragraph, producing `scripts/kernel-doc -Wreturn` warnings.
Void functions that incorrectly say "Returns ..." are also rephrased.
Fix all issues across the full file:
- Replace every `**/` terminator with `*/`.
- Change `function_name:` doc headers to `function_name -`.
- Move inline "Returns ..." sentences into dedicated `Return:` sections
for non-void functions (iavf_get_msglevel, iavf_get_rxnfc,
iavf_set_channels, iavf_get_rxfh_key_size, iavf_get_rxfh_indir_size,
iavf_get_rxfh, iavf_set_rxfh).
- Rephrase body descriptions in void functions that incorrectly said
"Returns ..." (iavf_get_drvinfo, iavf_get_ringparam, iavf_get_coalesce).
- Remove boilerplate body text for iavf_get_rxfh_key_size and
iavf_get_rxfh_indir_size; the `Return:` line now conveys the same
information without the vague "Returns the table size." sentence.
Suggested-by: Anthony L. Nguyen <anthony.l.nguyen@intel.com>
Suggested-by: Leszek Pepiak <leszek.pepiak@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260409093020.3808687-1-aleksandr.loktionov@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
airoha_fe_set routine is used to set specified bits to 1 in the selected
register. In the FE_PSE_BUF_SET case this can due to a overestimation of
the required buffers for I/O queues since we can miss to set some bits
of PSE_ALLRSV_MASK subfield to 0. Fix the issue relying on airoha_fe_rmw
routine instead.
Fixes: 8e38e08f2c560 ("net: airoha: fix PSE memory configuration in airoha_fe_pse_ports_init()")
Tested-by: Xuegang Lu <xuegang.lu@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260408-airoha-reg_fe_pse_buf_set-v1-1-0c4fa8f4d1d9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add VLAN support using both the Extended VLAN (EVLAN) engine and the
VLAN Filter (VF) engine in a hybrid architecture that allows a higher
number of VIDs than either engine could achieve alone.
The VLAN Filter engine handles per-port VID membership checks with
discard-unmatched semantics. The Extended VLAN engine handles PVID
insertion on ingress (via fixed catchall rules) and tag stripping on
egress (2 rules per untagged VID). Tagged-only VIDs need no EVLAN
egress rules at all, so they consume only a VF entry.
Both engines draw from shared 1024-entry hardware pools. The VF pool
is divided equally among user ports for VID membership, while the
EVLAN pool is partitioned into small fixed-size ingress blocks (7
entries of catchall rules per port) and fixed-size egress blocks for
tag stripping.
With 5 user ports this yields up to 204 VIDs per port (limited by VF),
of which up to 98 can be untagged (limited by EVLAN egress budget).
With 9 user ports the numbers are 113 total and 53 untagged.
Wire up .port_vlan_add, .port_vlan_del, and .port_vlan_filtering.
Reprogram all EVLAN rules when the PVID or filtering mode changes.
Detach blocks from the bridge port before freeing them on bridge leave
to satisfy the firmware's internal refcount.
Future optimizations could increase VID capacity by dynamically sizing
the egress EVLAN blocks based on actual per-port untagged VID counts
rather than worst-case pre-allocation, or by sharing EVLAN egress and
VLAN Filter blocks across ports with identical VID sets.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/9be29637675342b109a85fa08f5378800d9f7b78.1775581804.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
mxl862xx_bridge_port_set() is currently guarded by the
mxl8622_port->setup_done flag, as the early call to
mxl862xx_bridge_port_set() from mxl862xx_port_stp_state_set() would
otherwise cause a NULL-pointer dereference on unused ports which don't
have dp->cpu_dp despite not being a CPU port.
Using the setup_done flag (which is never set for unused ports),
however, also prevents mxl862xx_bridge_port_set() from configuring
user ports' single-port bridges early, which was unintended.
Fix this by returning early from mxl862xx_bridge_port_set() in case
dsa_port_is_unused().
Fixes: 340bdf984613c ("net: dsa: mxl862xx: implement bridge offloading")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/15962aac29ebe0a6eb77565451acff880c41ef33.1775581804.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
DSA links aren't supported by the mxl862xx driver.
Instead of returning early from .port_setup when called for
DSA_PORT_TYPE_DSA ports rather return -EOPNOTSUPP and show an error
message.
The desired side-effect is that the framework will switch the port to
DSA_PORT_TYPE_UNUSED, so we can stop caring about DSA_PORT_TYPE_DSA in
all other places.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/b686f3a22d8a6e7d470e7aa98da811a996a229b9.1775581804.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sixpack_receive_buf() does not properly skip bytes with TTY error flags.
The while loop iterates through the flags buffer but never advances the
data pointer (cp), and passes the original count (including error bytes)
to sixpack_decode(). This causes sixpack_decode() to process bytes that
should have been skipped due to TTY errors. The TTY layer does not
guarantee that cp[i] holds a meaningful value when fp[i] is set, so
passing those positions to sixpack_decode() results in KMSAN reporting
an uninit-value read.
Fix this by processing bytes one at a time, advancing cp on each
iteration, and only passing valid (non-error) bytes to sixpack_decode().
This matches the pattern used by slip_receive_buf() and
mkiss_receive_buf() for the same purpose.
Reported-by: syzbot+ecdb8c9878a81eb21e54@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ecdb8c9878a81eb21e54
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Mashiro Chen <mashiro.chen@mailbox.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260407173101.107352-1-mashiro.chen@mailbox.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On each WMI message received from the hardware, we alloc a temporary array
of WMI_TAG_MAX entries of type void *. This array is then populated with
pointers of parsed structs depending on the WMI type, and then freed. This
alloc can fail when memory pressure in the system is high enough.
Given the fact that it is scheduled in softirq with the system_bh_wq, we
should not be able to parse more than one WMI message per CPU at any time.
So instead lets move to a per cpu allocated array, that is reused across
calls. This memory is allocated as needed and refcounted to exist only
as long as one struct ath12k_base lives.
ath12k_wmi_tlv_parse_alloc() and ath12k_wmi_tlv_parse() are merged
together as it no longer allocs mem but returns the existing per-cpu one.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00218-QCAHKSWPL_SILICONZ-1
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260407095426.3285574-1-nico.escande@gmail.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"The kernfs rbtree is keyed by (hash, ns, name) where the hash
is seeded with the raw namespace pointer via init_name_hash(ns).
The resulting hash values are exposed to userspace through
readdir seek positions, and the pointer-based ordering in
kernfs_name_compare() is observable through entry order.
Switch from raw pointers to ns_common::ns_id for both hashing
and comparison.
A preparatory commit first replaces all const void * namespace
parameters with const struct ns_common * throughout kernfs, sysfs,
and kobject so the code can access ns->ns_id. Also compare the
ns_id when hashes match in the rbtree to handle crafted collisions.
Also fix eventpoll RCU grace period issue and a cachefiles refcount
problem"
* tag 'vfs-7.0-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
kernfs: make directory seek namespace-aware
kernfs: use namespace id instead of pointer for hashing and comparison
kernfs: pass struct ns_common instead of const void * for namespace tags
eventpoll: defer struct eventpoll free to RCU grace period
cachefiles: fix incorrect dentry refcount in cachefiles_cull()
|
|
fbnic_up() calls netif_tx_start_all_queues(), which only clears
__QUEUE_STATE_DRV_XOFF. If qdisc backlog has accumulated on any TX
queue before the reconfiguration (e.g. ring resize via ethtool -G),
start does not call __netif_schedule() to kick the qdisc, so the
pending backlog is never drained and the queue stalls.
Switch to netif_tx_wake_all_queues(), which clears DRV_XOFF and also
calls __netif_schedule() on every queue, ensuring any backlog that
built up before the down/up cycle is promptly dequeued.
Fixes: bc6107771bb4 ("eth: fbnic: Allocate a netdevice and napi vectors with queues")
Signed-off-by: Mohsin Bashir <hmohsin@meta.com>
Link: https://patch.msgid.link/20260408002415.2963915-1-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add missing dma_rmb() in airoha_qdma_rx_process routine to make sure the
DMA read operations are completed when the NIC reports the processing on
the current descriptor is done. Moreover, add missing READ_ONCE() in
airoha_qdma_rx_process() for DMA descriptor control fields in order to
avoid any compiler reordering.
Fixes: 23020f0493270 ("net: airoha: Introduce ethernet support for EN7581 SoC")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260407-airoha_qdma_rx_process-fix-reordering-v3-1-91c36e9da31f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For the copper NIC with external PHY, the driver called
phylink_connect_phy() during probe and phylink_disconnect_phy() during
remove. It caused an RTNL assertion warning in phylink_disconnect_phy()
upon module remove.
To fix this, add rtnl_lock() and rtnl_unlock() around the
phylink_disconnect_phy() in remove function.
------------[ cut here ]------------
RTNL: assertion failed at drivers/net/phy/phylink.c (2351)
WARNING: drivers/net/phy/phylink.c:2351 at
phylink_disconnect_phy+0xd8/0xf0 [phylink], CPU#0: rmmod/4464
Modules linked in: ...
CPU: 0 UID: 0 PID: 4464 Comm: rmmod Kdump: loaded Not tainted 7.0.0-rc4+
Hardware name: Micro-Star International Co., Ltd. MS-7E16/X670E GAMING
PLUS WIFI (MS-7E16), BIOS 1.90 12/31/2024
RIP: 0010:phylink_disconnect_phy+0xe4/0xf0 [phylink]
Code: 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 31 d2 31 f6 31 ff e9 3a 38 8f e7
48 8d 3d 48 87 e2 ff ba 2f 09 00 00 48 c7 c6 c1 22 24 c0 <67> 48 0f b9 3a
e9 34 ff ff ff 66 90 90 90 90 90 90 90 90 90 90 90
RSP: 0018:ffffce7288363ac0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff89654b2a1a00 RCX: 0000000000000000
RDX: 000000000000092f RSI: ffffffffc02422c1 RDI: ffffffffc0239020
RBP: ffffce7288363ae8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8964c4022000
R13: ffff89654fce3028 R14: ffff89654ebb4000 R15: ffffffffc0226348
FS: 0000795e80d93780(0000) GS:ffff896c52857000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005b528b592000 CR3: 0000000170d0f000 CR4: 0000000000f50ef0
PKRU: 55555554
Call Trace:
<TASK>
txgbe_remove_phy+0xbb/0xd0 [txgbe]
txgbe_remove+0x4c/0xb0 [txgbe]
pci_device_remove+0x41/0xb0
device_remove+0x43/0x80
device_release_driver_internal+0x206/0x270
driver_detach+0x4a/0xa0
bus_remove_driver+0x83/0x120
driver_unregister+0x2f/0x60
pci_unregister_driver+0x40/0x90
txgbe_driver_exit+0x10/0x850 [txgbe]
__do_sys_delete_module.isra.0+0x1c3/0x2f0
__x64_sys_delete_module+0x12/0x20
x64_sys_call+0x20c3/0x2390
do_syscall_64+0x11c/0x1500
? srso_alias_return_thunk+0x5/0xfbef5
? do_syscall_64+0x15a/0x1500
? srso_alias_return_thunk+0x5/0xfbef5
? do_fault+0x312/0x580
? srso_alias_return_thunk+0x5/0xfbef5
? __handle_mm_fault+0x9d5/0x1040
? srso_alias_return_thunk+0x5/0xfbef5
? count_memcg_events+0x101/0x1d0
? srso_alias_return_thunk+0x5/0xfbef5
? handle_mm_fault+0x1e8/0x2f0
? srso_alias_return_thunk+0x5/0xfbef5
? do_user_addr_fault+0x2f8/0x820
? srso_alias_return_thunk+0x5/0xfbef5
? irqentry_exit+0xb2/0x600
? srso_alias_return_thunk+0x5/0xfbef5
? exc_page_fault+0x92/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fixes: 02b2a6f91b90 ("net: txgbe: support copper NIC with external PHY")
Cc: stable@vger.kernel.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/8B47A5872884147D+20260407094041.4646-1-jiawenwu@trustnetic.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The bcmgenet_timeout handler tries to take down all tx queues when
a single queue times out. This is over zealous and causes many race
conditions with queues that are still chugging along. Instead lets
only restart the timed out queue.
Fixes: 13ea657806cf ("net: bcmgenet: improve TX timeout")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Tested-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260406175756.134567-4-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
While reclaiming the tx queue we fast forward the write pointer to
drop any data in flight. These dropped frames are not added back
to the pool of free bds. We also need to tell the netdev that we
are dropping said data.
Fixes: f1bacae8b655 ("net: bcmgenet: support reclaiming unsent Tx packets")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Tested-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260406175756.134567-3-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The write_ptr points to the next open tx_cb. We want to return the
tx_cb that gets rewinded, so we must rewind the pointer first then
return the tx_cb that it points to. That way the txcb can be correctly
cleaned up.
Fixes: 876dbadd53a7 ("net: bcmgenet: Fix unmapping of fragments in bcmgenet_xmit()")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Link: https://patch.msgid.link/20260406175756.134567-2-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
For non-PREEMPT_RT kernels, the IRQ handler runs with interrupts
disabled, allowing the use of napi_schedule_irqoff() to save a pair of
local_irq_{save,restore} operations. For PREEMPT_RT kernels,
napi_schedule_irqoff() behaves identically to napi_schedule().
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20260407-macb-napi-irqoff-v1-1-61bec60047d7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
