summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2023-01-07Input: elants_i2c - properly handle the reset GPIO when power is offDouglas Anderson
[ Upstream commit a85fbd6498441694475716a4d5c65f9d3e073faf ] As can be seen in elants_i2c_power_off(), we want the reset GPIO asserted when power is off. The reset GPIO is active low so we need the reset line logic low when power is off to avoid leakage. We have a problem, though, at probe time. At probe time we haven't powered the regulators on yet but we have: devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW); While that _looks_ right, it turns out that it's not. The GPIOD_OUT_LOW doesn't mean to init the GPIO to low. It means init the GPIO to "not asserted". Since this is an active low GPIO that inits it to be high. Let's fix this to properly init the GPIO. Now after both probe and power off the state of the GPIO is consistent (it's "asserted" or level low). Once we fix this, we can see that at power on time we no longer to assert the reset GPIO as the first thing. The reset GPIO is _always_ asserted before powering on. Let's fix powering on to account for this. Fixes: afe10358e47a ("Input: elants_i2c - wire up regulator support") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20221117123805.1.I9959ac561dd6e1e8e1ce7085e4de6167b27c574f@changeid Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26Input: xpad - fix wireless 360 controller breaking after suspendCameron Gutman
commit a17b9841152e7f4621619902b347e2cc39c32996 upstream. Suspending and resuming the system can sometimes cause the out URB to get hung after a reset_resume. This causes LED setting and force feedback to break on resume. To avoid this, just drop the reset_resume callback so the USB core rebinds xpad to the wireless pads on resume if a reset happened. A nice side effect of this change is the LED ring on wireless controllers is now set correctly on system resume. Cc: stable@vger.kernel.org Fixes: 4220f7db1e42 ("Input: xpad - workaround dead irq_out after suspend/ resume") Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Link: https://lore.kernel.org/r/20220818154411.510308-3-rojtberg@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26Input: xpad - add supported devices as contributed on githubPavel Rojtberg
commit b382c5e37344883dc97525d05f1f6b788f549985 upstream. This is based on multiple commits at https://github.com/paroj/xpad Cc: stable@vger.kernel.org Signed-off-by: Jasper Poppe <jgpoppe@gmail.com> Signed-off-by: Jeremy Palmer <jpalmer@linz.govt.nz> Signed-off-by: Ruineka <ruinairas1992@gmail.com> Signed-off-by: Cleber de Mattos Casali <clebercasali@gmail.com> Signed-off-by: Kyle Gospodnetich <me@kylegospodneti.ch> Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com> Link: https://lore.kernel.org/r/20220818154411.510308-2-rojtberg@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26Input: melfas_mip4 - fix return value check in mip4_probe()Yang Yingliang
[ Upstream commit a54dc27bd25f20ee3ea2009584b3166d25178243 ] devm_gpiod_get_optional() may return ERR_PTR(-EPROBE_DEFER), add a minus sign to fix it. Fixes: 6ccb1d8f78bd ("Input: add MELFAS MIP4 Touchscreen driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20220924030715.1653538-1-yangyingliang@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-06-14Input: bcm5974 - set missing URB_NO_TRANSFER_DMA_MAP urb flagMathias Nyman
commit c42e65664390be7c1ef3838cd84956d3a2739d60 upstream. The bcm5974 driver does the allocation and dma mapping of the usb urb data buffer, but driver does not set the URB_NO_TRANSFER_DMA_MAP flag to let usb core know the buffer is already mapped. usb core tries to map the already mapped buffer, causing a warning: "xhci_hcd 0000:00:14.0: rejecting DMA map of vmalloc memory" Fix this by setting the URB_NO_TRANSFER_DMA_MAP, letting usb core know buffer is already mapped by bcm5974 driver Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=215890 Link: https://lore.kernel.org/r/20220606113636.588955-1-mathias.nyman@linux.intel.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-14Input: sparcspkr - fix refcount leak in bbc_beep_probeMiaoqian Lin
[ Upstream commit c8994b30d71d64d5dcc9bc0edbfdf367171aa96f ] of_find_node_by_path() calls of_find_node_opts_by_path(), which returns a node pointer with refcount incremented, we should use of_node_put() on it when done. Add missing of_node_put() to avoid refcount leak. Fixes: 9c1a5077fdca ("input: Rewrite sparcspkr device probing.") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220516081018.42728-1-linmq006@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25Input: add bounds checking to input_set_capability()Jeff LaBundy
[ Upstream commit 409353cbe9fe48f6bc196114c442b1cff05a39bc ] Update input_set_capability() to prevent kernel panic in case the event code exceeds the bitmap for the given event type. Suggested-by: Tomasz Moń <tomasz.mon@camlingroup.com> Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Tomasz Moń <tomasz.mon@camlingroup.com> Link: https://lore.kernel.org/r/20220320032537.545250-1-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"José Expósito
commit 8b188fba75195745026e11d408e4a7e94e01d701 upstream. This reverts commit 37ef4c19b4c659926ce65a7ac709ceaefb211c40. The touchpad present in the Dell Precision 7550 and 7750 laptops reports a HID_DG_BUTTONTYPE of type MT_BUTTONTYPE_CLICKPAD. However, the device is not a clickpad, it is a touchpad with physical buttons. In order to fix this issue, a quirk for the device was introduced in libinput [1] [2] to disable the INPUT_PROP_BUTTONPAD property: [Precision 7x50 Touchpad] MatchBus=i2c MatchUdevType=touchpad MatchDMIModalias=dmi:*svnDellInc.:pnPrecision7?50* AttrInputPropDisable=INPUT_PROP_BUTTONPAD However, because of the change introduced in 37ef4c19b4 ("Input: clear BTN_RIGHT/MIDDLE on buttonpads") the BTN_RIGHT key bit is not mapped anymore breaking the device right click button and making impossible to workaround it in user space. In order to avoid breakage on other present or future devices, revert the patch causing the issue. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220321184404.20025-1-jose.exposito89@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-23Input: aiptek - properly check endpoint typePavel Skripkin
commit 5600f6986628dde8881734090588474f54a540a8 upstream. Syzbot reported warning in usb_submit_urb() which is caused by wrong endpoint type. There was a check for the number of endpoints, but not for the type of endpoint. Fix it by replacing old desc.bNumEndpoints check with usb_find_common_endpoints() helper for finding endpoints Fail log: usb 5-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 2 PID: 48 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 Modules linked in: CPU: 2 PID: 48 Comm: kworker/2:2 Not tainted 5.17.0-rc6-syzkaller-00226-g07ebd38a0da2 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Workqueue: usb_hub_wq hub_event ... Call Trace: <TASK> aiptek_open+0xd5/0x130 drivers/input/tablet/aiptek.c:830 input_open_device+0x1bb/0x320 drivers/input/input.c:629 kbd_connect+0xfe/0x160 drivers/tty/vt/keyboard.c:1593 Fixes: 8e20cf2bce12 ("Input: aiptek - fix crash on detecting device without endpoints") Reported-and-tested-by: syzbot+75cccf2b7da87fb6f84b@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20220308194328.26220-1-paskripkin@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08Input: elan_i2c - fix regulator enable count imbalance after suspend/resumeHans de Goede
commit 04b7762e37c95d9b965d16bb0e18dbd1fa2e2861 upstream. Before these changes elan_suspend() would only disable the regulator when device_may_wakeup() returns false; whereas elan_resume() would unconditionally enable it, leading to an enable count imbalance when device_may_wakeup() returns true. This triggers the "WARN_ON(regulator->enable_count)" in regulator_put() when the elan_i2c driver gets unbound, this happens e.g. with the hot-plugable dock with Elan I2C touchpad for the Asus TF103C 2-in-1. Fix this by making the regulator_enable() call also be conditional on device_may_wakeup() returning false. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220131135436.29638-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08Input: elan_i2c - move regulator_[en|dis]able() out of elan_[en|dis]able_power()Hans de Goede
commit 81a36d8ce554b82b0a08e2b95d0bd44fcbff339b upstream. elan_disable_power() is called conditionally on suspend, where as elan_enable_power() is always called on resume. This leads to an imbalance in the regulator's enable count. Move the regulator_[en|dis]able() calls out of elan_[en|dis]able_power() in preparation of fixing this. No functional changes intended. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20220131135436.29638-1-hdegoede@redhat.com [dtor: consolidate elan_[en|dis]able() into elan_set_power()] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08Input: clear BTN_RIGHT/MIDDLE on buttonpadsJosé Expósito
[ Upstream commit 37ef4c19b4c659926ce65a7ac709ceaefb211c40 ] Buttonpads are expected to map the INPUT_PROP_BUTTONPAD property bit and the BTN_LEFT key bit. As explained in the specification, where a device has a button type value of 0 (click-pad) or 1 (pressure-pad) there should not be discrete buttons: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/touchpad-windows-precision-touchpad-collection#device-capabilities-feature-report However, some drivers map the BTN_RIGHT and/or BTN_MIDDLE key bits even though the device is a buttonpad and therefore does not have those buttons. This behavior has forced userspace applications like libinput to implement different workarounds and quirks to detect buttonpads and offer to the user the right set of features and configuration options. For more information: https://gitlab.freedesktop.org/libinput/libinput/-/merge_requests/726 In order to avoid this issue clear the BTN_RIGHT and BTN_MIDDLE key bits when the input device is register if the INPUT_PROP_BUTTONPAD property bit is set. Notice that this change will not affect udev because it does not check for buttons. See systemd/src/udev/udev-builtin-input_id.c. List of known affected hardware: - Chuwi AeroBook Plus - Chuwi Gemibook - Framework Laptop - GPD Win Max - Huawei MateBook 2020 - Prestigio Smartbook 141 C2 - Purism Librem 14v1 - StarLite Mk II - AMI firmware - StarLite Mk II - Coreboot firmware - StarLite Mk III - AMI firmware - StarLite Mk III - Coreboot firmware - StarLabTop Mk IV - AMI firmware - StarLabTop Mk IV - Coreboot firmware - StarBook Mk V Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: José Expósito <jose.exposito89@gmail.com> Link: https://lore.kernel.org/r/20220208174806.17183-1-jose.exposito89@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-02-16Input: i8042 - Fix misplaced backport of "add ASUS Zenbook Flip to ↵Guillaume Bertholon
noselftest list" The upstream commit b5d6e7ab7fe7 ("Input: i8042 - add ASUS Zenbook Flip to noselftest list") inserted a new entry in the `i8042_dmi_noselftest_table` table, further patched by commit daa58c8eec0a ("Input: i8042 - fix Pegatron C15B ID entry") to insert a missing separator. However, their backported version in stable (commit e9e8b3769099 ("Input: i8042 - add ASUS Zenbook Flip to noselftest list") and commit c551d20d487a ("Input: i8042 - fix Pegatron C15B ID entry")) inserted this entry in `i8042_dmi_forcemux_table` instead. This patch moves the entry back into `i8042_dmi_noselftest_table`. Fixes: e9e8b3769099 ("Input: i8042 - add ASUS Zenbook Flip to noselftest list") Signed-off-by: Guillaume Bertholon <guillaume.bertholon@ens.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-05Input: spaceball - fix parsing of movement data packetsLeo L. Schwab
commit bc7ec91718c49d938849697cfad98fcd9877cc26 upstream. The spaceball.c module was not properly parsing the movement reports coming from the device. The code read axis data as signed 16-bit little-endian values starting at offset 2. In fact, axis data in Spaceball movement reports are signed 16-bit big-endian values starting at offset 3. This was determined first by visually inspecting the data packets, and later verified by consulting: http://spacemice.org/pdf/SpaceBall_2003-3003_Protocol.pdf If this ever worked properly, it was in the time before Git... Signed-off-by: Leo L. Schwab <ewhac@ewhac.org> Link: https://lore.kernel.org/r/20211221101630.1146385-1-ewhac@ewhac.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-05Input: appletouch - initialize work before device registrationPavel Skripkin
commit 9f3ccdc3f6ef10084ceb3a47df0961bec6196fd0 upstream. Syzbot has reported warning in __flush_work(). This warning is caused by work->func == NULL, which means missing work initialization. This may happen, since input_dev->close() calls cancel_work_sync(&dev->work), but dev->work initalization happens _after_ input_register_device() call. So this patch moves dev->work initialization before registering input device Fixes: 5a6eb676d3bc ("Input: appletouch - improve powersaving for Geyser3 devices") Reported-and-tested-by: syzbot+b88c5eae27386b252bbd@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Link: https://lore.kernel.org/r/20211230141151.17300-1-paskripkin@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-22Input: touchscreen - avoid bitwise vs logical OR warningNathan Chancellor
commit a02dcde595f7cbd240ccd64de96034ad91cffc40 upstream. A new warning in clang points out a few places in this driver where a bitwise OR is being used with boolean types: drivers/input/touchscreen.c:81:17: warning: use of bitwise '|' with boolean operands [-Wbitwise-instead-of-logical] data_present = touchscreen_get_prop_u32(dev, "touchscreen-min-x", ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This use of a bitwise OR is intentional, as bitwise operations do not short circuit, which allows all the calls to touchscreen_get_prop_u32() to happen so that the last parameter is initialized while coalescing the results of the calls to make a decision after they are all evaluated. To make this clearer to the compiler, use the '|=' operator to assign the result of each touchscreen_get_prop_u32() call to data_present, which keeps the meaning of the code the same but makes it obvious that every one of these calls is expected to happen. Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reported-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20211014205757.3474635-1-nathan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26Input: i8042 - Add quirk for Fujitsu Lifebook T725Takashi Iwai
commit 16e28abb7290c4ca3b3a0f333ba067f34bb18c86 upstream. Fujitsu Lifebook T725 laptop requires, like a few other similar models, the nomux and notimeout options to probe the touchpad properly. This patch adds the corresponding quirk entries. BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1191980 Tested-by: Neal Gompa <ngompa13@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20211103070019.13374-1-tiwai@suse.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-11-26Input: elantench - fix misreporting trackpoint coordinatesPhoenix Huang
commit be896bd3b72b44126c55768f14c22a8729b0992e upstream. Some firmwares occasionally report bogus data from trackpoint, with X or Y displacement being too large (outside of [-127, 127] range). Let's drop such packets so that we do not generate jumps. Signed-off-by: Phoenix Huang <phoenix@emc.com.tw> Tested-by: Yufei Du <yufeidu@cs.unc.edu> Link: https://lore.kernel.org/r/20210729010940.5752-1-phoenix@emc.com.tw Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-27Input: xpad - add support for another USB ID of Nacon GC-100Michael Cullen
commit 3378a07daa6cdd11e042797454c706d1c69f9ca6 upstream. The Nacon GX100XF is already mapped, but it seems there is a Nacon GC-100 (identified as NC5136Wht PCGC-100WHITE though I believe other colours exist) with a different USB ID when in XInput mode. Signed-off-by: Michael Cullen <michael@michaelcullen.name> Link: https://lore.kernel.org/r/20211015192051.5196-1-michael@michaelcullen.name Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20Input: hil_kbd - fix error return code in hil_dev_connect()Zhen Lei
[ Upstream commit d9b576917a1d0efa293801a264150a1b37691617 ] Return error code -EINVAL rather than '0' when the combo devices are not supported. Fixes: fa71c605c2bb ("Input: combine hil_kbd and hil_ptr drivers") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210515030053.6824-1-thunder.leizhen@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-20Input: joydev - prevent use of not validated data in JSIOCSBTNMAP ioctlAlexander Larkin
commit f8f84af5da9ee04ef1d271528656dac42a090d00 upstream. Even though we validate user-provided inputs we then traverse past validated data when applying the new map. The issue was originally discovered by Murray McAllister with this simple POC (if the following is executed by an unprivileged user it will instantly panic the system): int main(void) { int fd, ret; unsigned int buffer[10000]; fd = open("/dev/input/js0", O_RDONLY); if (fd == -1) printf("Error opening file\n"); ret = ioctl(fd, JSIOCSBTNMAP & ~IOCSIZE_MASK, &buffer); printf("%d\n", ret); } The solution is to traverse internal buffer which is guaranteed to only contain valid date when constructing the map. Fixes: 182d679b2298 ("Input: joydev - prevent potential read overflow in ioctl") Fixes: 999b874f4aa3 ("Input: joydev - validate axis/button maps before clobbering current ones") Reported-by: Murray McAllister <murray.mcallister@gmail.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Alexander Larkin <avlarkin82@gmail.com> Link: https://lore.kernel.org/r/20210620120030.1513655-1-avlarkin82@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-20Input: usbtouchscreen - fix control-request directionsJohan Hovold
commit 41e81022a04a0294c55cfa7e366bc14b9634c66e upstream. The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Fix the four control requests which erroneously used usb_rcvctrlpipe(). Fixes: 1d3e20236d7a ("[PATCH] USB: usbtouchscreen: unified USB touchscreen driver") Fixes: 24ced062a296 ("usbtouchscreen: add support for DMC TSC-10/25 devices") Fixes: 9e3b25837a20 ("Input: usbtouchscreen - add support for e2i touchscreen controller") Signed-off-by: Johan Hovold <johan@kernel.org> Cc: stable@vger.kernel.org # 2.6.17 Link: https://lore.kernel.org/r/20210524092048.4443-1-johan@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-22Input: silead - add workaround for x86 BIOS-es which bring the chip up in a ↵Hans de Goede
stuck state [ Upstream commit e479187748a8f151a85116a7091c599b121fdea5 ] Some buggy BIOS-es bring up the touchscreen-controller in a stuck state where it blocks the I2C bus. Specifically this happens on the Jumper EZpad 7 tablet model. After much poking at this problem I have found that the following steps are necessary to unstuck the chip / bus: 1. Turn off the Silead chip. 2. Try to do an I2C transfer with the chip, this will fail in response to which the I2C-bus-driver will call: i2c_recover_bus() which will unstuck the I2C-bus. Note the unstuck-ing of the I2C bus only works if we first drop the chip of the bus by turning it off. 3. Turn the chip back on. On the x86/ACPI systems were this problem is seen, step 1. and 3. require making ACPI calls and dealing with ACPI Power Resources. This commit adds a workaround which runtime-suspends the chip to turn it off, leaving it up to the ACPI subsystem to deal with all the ACPI specific details. There is no good way to detect this bug, so the workaround gets activated by a new "silead,stuck-controller-bug" boolean device-property. Since this is only used on x86/ACPI, this will be set by model specific device-props set by drivers/platform/x86/touchscreen_dmi.c. Therefor this new device-property is not documented in the DT-bindings. Dmesg will contain the following messages on systems where the workaround is activated: [ 54.309029] silead_ts i2c-MSSL1680:00: [Firmware Bug]: Stuck I2C bus: please ignore the next 'controller timed out' error [ 55.373593] i2c_designware 808622C1:04: controller timed out [ 55.582186] silead_ts i2c-MSSL1680:00: Silead chip ID: 0x80360000 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210405202745.16777-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-28Input: i8042 - fix Pegatron C15B ID entryArnd Bergmann
commit daa58c8eec0a65ac8e2e77ff3ea8a233d8eec954 upstream. The Zenbook Flip entry that was added overwrites a previous one because of a typo: In file included from drivers/input/serio/i8042.h:23, from drivers/input/serio/i8042.c:131: drivers/input/serio/i8042-x86ia64io.h:591:28: error: initialized field overwritten [-Werror=override-init] 591 | .matches = { | ^ drivers/input/serio/i8042-x86ia64io.h:591:28: note: (near initialization for 'i8042_dmi_noselftest_table[0].matches') Add the missing separator between the two. Fixes: b5d6e7ab7fe7 ("Input: i8042 - add ASUS Zenbook Flip to noselftest list") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Marcos Paulo de Souza <mpdesouza@suse.com> Link: https://lore.kernel.org/r/20210323130623.2302402-1-arnd@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-28Input: nspire-keypad - enable interrupts only when openedFabian Vogt
[ Upstream commit 69d5ff3e9e51e23d5d81bf48480aa5671be67a71 ] The driver registers an interrupt handler in _probe, but didn't configure them until later when the _open function is called. In between, the keypad can fire an IRQ due to touchpad activity, which the handler ignores. This causes the kernel to disable the interrupt, blocking the keypad from working. Fix this by disabling interrupts before registering the handler. Additionally, disable them in _close, so that they're only enabled while open. Fixes: fc4f31461892 ("Input: add TI-Nspire keypad support") Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de> Link: https://lore.kernel.org/r/3383725.iizBOSrK1V@linux-e202.suse.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-03Input: i8042 - add ASUS Zenbook Flip to noselftest listMarcos Paulo de Souza
commit b5d6e7ab7fe7d186878142e9fc1a05e4c3b65eb9 upstream. After commit 77b425399f6d ("Input: i8042 - use chassis info to skip selftest on Asus laptops"), all modern Asus laptops have the i8042 selftest disabled. It has done by using chassys type "10" (laptop). The Asus Zenbook Flip suffers from similar suspend/resume issues, but it _sometimes_ work and sometimes it doesn't. Setting noselftest makes it work reliably. In this case, we need to add chassis type "31" (convertible) in order to avoid selftest in this device. Reported-by: Ludvig Norgren Guldhag <ludvigng@gmail.com> Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com> Link: https://lore.kernel.org/r/20210219164638.761-1-mpdesouza@suse.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-03Input: joydev - prevent potential read overflow in ioctlDan Carpenter
commit 182d679b2298d62bf42bb14b12a8067b8e17b617 upstream. The problem here is that "len" might be less than "joydev->nabs" so the loops which verfy abspam[i] and keypam[] might read beyond the buffer. Fixes: 999b874f4aa3 ("Input: joydev - validate axis/button maps before clobbering current ones") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YCyzR8WvFRw4HWw6@mwanda [dtor: additional check for len being even in joydev_handle_JSIOCSBTNMAP] Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-03Input: xpad - add support for PowerA Enhanced Wired Controller for Xbox ↵Olivier Crête
Series X|S commit 42ffcd1dba1796bcda386eb6f260df9fc23c90af upstream. Signed-off-by: Olivier Crête <olivier.crete@ocrete.ca> Link: https://lore.kernel.org/r/20210204005318.615647-1-olivier.crete@collabora.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-03Input: raydium_ts_i2c - do not send zero lengthjeffrey.lin
commit fafd320ae51b9c72d371585b2501f86640ea7b7d upstream. Add default write command package to prevent i2c quirk error of zero data length as Raydium touch firmware update is executed. Signed-off-by: jeffrey.lin <jeffrey.lin@rad-ic.com> Link: https://lore.kernel.org/r/1608031217-7247-1-git-send-email-jeffrey.lin@raydium.corp-partner.google.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-03Input: elo - fix an error code in elo_connect()Dan Carpenter
[ Upstream commit 0958351e93fa0ac142f6dd8bd844441594f30a57 ] If elo_setup_10() fails then this should return an error code instead of success. Fixes: fae3006e4b42 ("Input: elo - add support for non-pressure-sensitive touchscreens") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YBKFd5CvDu+jVmfW@mwanda Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-10Input: xpad - sync supported devices with fork on GitHubBenjamin Valentin
commit 9bbd77d5bbc9aff8cb74d805c31751f5f0691ba8 upstream. There is a fork of this driver on GitHub [0] that has been updated with new device IDs. Merge those into the mainline driver, so the out-of-tree fork is not needed for users of those devices anymore. [0] https://github.com/paroj/xpad Signed-off-by: Benjamin Valentin <benpicco@googlemail.com> Link: https://lore.kernel.org/r/20210121142523.1b6b050f@rechenknecht2k11 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-10Input: i8042 - unbreak Pegatron C15BAlexey Dobriyan
[ Upstream commit a3a9060ecad030e2c7903b2b258383d2c716b56c ] g++ reports drivers/input/serio/i8042-x86ia64io.h:225:3: error: ‘.matches’ designator used multiple times in the same initializer list C99 semantics is that last duplicated initialiser wins, so DMI entry gets overwritten. Fixes: a48491c65b51 ("Input: i8042 - add ByteSpeed touchpad to noloop table") Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Link: https://lore.kernel.org/r/20201228072335.GA27766@localhost.localdomain Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-23Input: uinput - avoid FF flush when destroying deviceDmitry Torokhov
commit e8b95728f724797f958912fd9b765a695595d3a6 upstream. Normally, when input device supporting force feedback effects is being destroyed, we try to "flush" currently playing effects, so that the physical device does not continue vibrating (or executing other effects). Unfortunately this does not work well for uinput as flushing of the effects deadlocks with the destroy action: - if device is being destroyed because the file descriptor is being closed, then there is noone to even service FF requests; - if device is being destroyed because userspace sent UI_DEV_DESTROY, while theoretically it could be possible to service FF requests, userspace is unlikely to do so (they'd need to make sure FF handling happens on a separate thread) even if kernel solves the issue with FF ioctls deadlocking with UI_DEV_DESTROY ioctl on udev->mutex. To avoid lockups like the one below, let's install a custom input device flush handler, and avoid trying to flush force feedback effects when we destroying the device, and instead rely on uinput to shut off the device properly. NMI watchdog: Watchdog detected hard LOCKUP on cpu 3 ... <<EOE>> [<ffffffff817a0307>] _raw_spin_lock_irqsave+0x37/0x40 [<ffffffff810e633d>] complete+0x1d/0x50 [<ffffffffa00ba08c>] uinput_request_done+0x3c/0x40 [uinput] [<ffffffffa00ba587>] uinput_request_submit.part.7+0x47/0xb0 [uinput] [<ffffffffa00bb62b>] uinput_dev_erase_effect+0x5b/0x76 [uinput] [<ffffffff815d91ad>] erase_effect+0xad/0xf0 [<ffffffff815d929d>] flush_effects+0x4d/0x90 [<ffffffff815d4cc0>] input_flush_device+0x40/0x60 [<ffffffff815daf1c>] evdev_cleanup+0xac/0xc0 [<ffffffff815daf5b>] evdev_disconnect+0x2b/0x60 [<ffffffff815d74ac>] __input_unregister_device+0xac/0x150 [<ffffffff815d75f7>] input_unregister_device+0x47/0x70 [<ffffffffa00bac45>] uinput_destroy_device+0xb5/0xc0 [uinput] [<ffffffffa00bb2de>] uinput_ioctl_handler.isra.9+0x65e/0x740 [uinput] [<ffffffff811231ab>] ? do_futex+0x12b/0xad0 [<ffffffffa00bb3f8>] uinput_ioctl+0x18/0x20 [uinput] [<ffffffff81241248>] do_vfs_ioctl+0x298/0x480 [<ffffffff81337553>] ? security_file_ioctl+0x43/0x60 [<ffffffff812414a9>] SyS_ioctl+0x79/0x90 [<ffffffff817a04ee>] entry_SYSCALL_64_fastpath+0x12/0x71 Reported-by: Rodrigo Rivas Costa <rodrigorivascosta@gmail.com> Reported-by: Clément VUCHENER <clement.vuchener@gmail.com> Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=193741 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-29Input: cyapa_gen6 - fix out-of-bounds stack accessArnd Bergmann
commit f051ae4f6c732c231046945b36234e977f8467c6 upstream. gcc -Warray-bounds warns about a serious bug in cyapa_pip_retrieve_data_structure: drivers/input/mouse/cyapa_gen6.c: In function 'cyapa_pip_retrieve_data_structure.constprop': include/linux/unaligned/access_ok.h:40:17: warning: array subscript -1 is outside array bounds of 'struct retrieve_data_struct_cmd[1]' [-Warray-bounds] 40 | *((__le16 *)p) = cpu_to_le16(val); drivers/input/mouse/cyapa_gen6.c:569:13: note: while referencing 'cmd' 569 | } __packed cmd; | ^~~ Apparently the '-2' was added to the pointer instead of the value, writing garbage into the stack next to this variable. Fixes: c2c06c41f700 ("Input: cyapa - add gen6 device module support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201026161332.3708389-1-arnd@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-29Input: goodix - add upside-down quirk for Teclast X98 Pro tabletSimon Beginn
[ Upstream commit cffdd6d90482316e18d686060a4397902ea04bd2 ] The touchscreen on the Teclast x98 Pro is also mounted upside-down in relation to the display orientation. Signed-off-by: Simon Beginn <linux@simonmicro.de> Signed-off-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20201117004253.27A5A27EFD@localhost Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29Input: cros_ec_keyb - send 'scancodes' in addition to key eventsDmitry Torokhov
[ Upstream commit 80db2a087f425b63f0163bc95217abd01c637cb5 ] To let userspace know what 'scancodes' should be used in EVIOCGKEYCODE and EVIOCSKEYCODE ioctls, we should send EV_MSC/MSC_SCAN events in addition to EV_KEY/KEY_* events. The driver already declared MSC_SCAN capability, so it is only matter of actually sending the events. Link: https://lore.kernel.org/r/X87aOaSptPTvZ3nZ@google.com Acked-by: Rajat Jain <rajatja@google.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29Input: ads7846 - fix unaligned access on 7845Dmitry Torokhov
[ Upstream commit 03e2c9c782f721b661a0e42b1b58f394b5298544 ] req->sample[1] is not naturally aligned at word boundary, and therefore we should use get_unaligned_be16() when accessing it. Fixes: 3eac5c7e44f3 ("Input: ads7846 - extend the driver for ads7845 controller support") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29Input: ads7846 - fix integer overflow on Rt calculationOleksij Rempel
[ Upstream commit 820830ec918f6c3dcd77a54a1c6198ab57407916 ] In some rare cases the 32 bit Rt value will overflow if z2 and x is max, z1 is minimal value and x_plate_ohms is relatively high (for example 800 ohm). This would happen on some screen age with low pressure. There are two possible fixes: - make Rt 64bit - reorder calculation to avoid overflow The second variant seems to be preferable, since 64 bit calculation on 32 bit system is a bit more expensive. Fixes: ffa458c1bd9b6f653008d450f337602f3d52a646 ("spi: ads7846 driver") Co-developed-by: David Jander <david@protonic.nl> Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20201113112240.1360-1-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-29Input: i8042 - add Acer laptops to the i8042 reset listChris Chiu
commit ce6520b0eafad5962ffc21dc47cd7bd3250e9045 upstream. The touchpad operates in Basic Mode by default in the Acer BIOS setup, but some Aspire/TravelMate models require the i8042 to be reset in order to be correctly detected. Signed-off-by: Chris Chiu <chiu@endlessos.org> Link: https://lore.kernel.org/r/20201207071250.15021-1-chiu@endlessos.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-29Input: cm109 - do not stomp on control URBDmitry Torokhov
commit 82e06090473289ce63e23fdeb8737aad59b10645 upstream. We need to make sure we are not stomping on the control URB that was issued when opening the device when attempting to toggle buzzer. To do that we need to mark it as pending in cm109_open(). Reported-and-tested-by: syzbot+150f793ac5bc18eee150@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-11Input: i8042 - fix error return code in i8042_setup_aux()Luo Meng
commit 855b69857830f8d918d715014f05e59a3f7491a0 upstream. Fix to return a negative error code from the error handling case instead of 0 in function i8042_setup_aux(), as done elsewhere in this function. Fixes: f81134163fc7 ("Input: i8042 - use platform_driver_probe") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Luo Meng <luomeng12@huawei.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201123133420.4071187-1-luomeng12@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-11Input: i8042 - add ByteSpeed touchpad to noloop tablePo-Hsu Lin
commit a48491c65b513e5cdc3e7a886a4db915f848a5f5 upstream. It looks like the C15B laptop got another vendor: ByteSpeed LLC. Avoid AUX loopback on this touchpad as well, thus input subsystem will be able to recognize a Synaptics touchpad in the AUX port. BugLink: https://bugs.launchpad.net/bugs/1906128 Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Link: https://lore.kernel.org/r/20201201054723.5939-1-po-hsu.lin@canonical.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-11Input: xpad - support Ardwiino ControllersSanjay Govind
commit 2aab1561439032be2e98811dd0ddbeb5b2ae4c61 upstream. This commit adds support for Ardwiino Controllers Signed-off-by: Sanjay Govind <sanjay.govind9@gmail.com> Link: https://lore.kernel.org/r/20201201071922.131666-1-sanjay.govind9@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-02Input: i8042 - allow insmod to succeed on devices without an i8042 controllerHans de Goede
[ Upstream commit b1884583fcd17d6a1b1bba94bbb5826e6b5c6e17 ] The i8042 module exports several symbols which may be used by other modules. Before this commit it would refuse to load (when built as a module itself) on systems without an i8042 controller. This is a problem specifically for the asus-nb-wmi module. Many Asus laptops support the Asus WMI interface. Some of them have an i8042 controller and need to use i8042_install_filter() to filter some kbd events. Other models do not have an i8042 controller (e.g. they use an USB attached kbd). Before this commit the asus-nb-wmi driver could not be loaded on Asus models without an i8042 controller, when the i8042 code was built as a module (as Arch Linux does) because the module_init function of the i8042 module would fail with -ENODEV and thus the i8042_install_filter symbol could not be loaded. This commit fixes this by exiting from module_init with a return code of 0 if no controller is found. It also adds a i8042_present bool to make the module_exit function a no-op in this case and also adds a check for i8042_present to the exported i8042_command function. The latter i8042_present check should not really be necessary because when builtin that function can already be used on systems without an i8042 controller, but better safe then sorry. Reported-and-tested-by: Marius Iacob <themariusus@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20201008112628.3979-2-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-24Input: adxl34x - clean up a data type in adxl34x_probe()Dan Carpenter
[ Upstream commit 33b6c39e747c552fa770eecebd1776f1f4a222b1 ] The "revid" is used to store negative error codes so it should be an int type. Fixes: e27c729219ad ("Input: add driver for ADXL345/346 Digital Accelerometers") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Link: https://lore.kernel.org/r/20201026072824.GA1620546@mwanda Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-22Input: sunkbd - avoid use-after-free in teardown pathsDmitry Torokhov
commit 77e70d351db7de07a46ac49b87a6c3c7a60fca7e upstream. We need to make sure we cancel the reinit work before we tear down the driver structures. Reported-by: Bodong Zhao <nopitydays@gmail.com> Tested-by: Bodong Zhao <nopitydays@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10hil/parisc: Disable HIL driver when it gets stuckHelge Deller
commit 879bc2d27904354b98ca295b6168718e045c4aa2 upstream. When starting a HP machine with HIL driver but without an HIL keyboard or HIL mouse attached, it may happen that data written to the HIL loop gets stuck (e.g. because the transaction queue is full). Usually one will then have to reboot the machine because all you see is and endless output of: Transaction add failed: transaction already queued? In the higher layers hp_sdc_enqueue_transaction() is called to queued up a HIL packet. This function returns an error code, and this patch adds the necessary checks for this return code and disables the HIL driver if further packets can't be sent. Tested on a HP 730 and a HP 715/64 machine. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29Input: sun4i-ps2 - fix handling of platform_get_irq() errorKrzysztof Kozlowski
[ Upstream commit cafb3abea6136e59ea534004e5773361e196bb94 ] platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check. Fixes: e443631d20f5 ("Input: serio - add support for Alwinner A10/A20 PS/2 controller") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20200828145744.3636-4-krzk@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29Input: twl4030_keypad - fix handling of platform_get_irq() errorKrzysztof Kozlowski
[ Upstream commit c277e1f0dc3c7d7b5b028e20dd414df241642036 ] platform_get_irq() returns -ERRNO on error. In such case casting to unsigned and comparing to 0 would pass the check. Fixes: 7abf38d6d13c ("Input: twl4030-keypad - add device tree support") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200828145744.3636-3-krzk@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29Input: omap4-keypad - fix handling of platform_get_irq() errorKrzysztof Kozlowski
[ Upstream commit 4738dd1992fa13acfbbd71800c71c612f466fa44 ] platform_get_irq() returns -ERRNO on error. In such case comparison to 0 would pass the check. Fixes: f3a1ba60dbdb ("Input: omap4-keypad - use platform device helpers") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200828145744.3636-2-krzk@kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-05-06 22:53:14 +0000