summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)Author
2016-09-07Input: i8042 - set up shared ps2_cmd_mutex for AUX portsDmitry Torokhov
commit 47af45d684b5f3ae000ad448db02ce4f13f73273 upstream. The commit 4097461897df ("Input: i8042 - break load dependency ...") correctly set up ps2_cmd_mutex pointer for the KBD port but forgot to do the same for AUX port(s), which results in communication on KBD and AUX ports to clash with each other. Fixes: 4097461897df ("Input: i8042 - break load dependency ...") Reported-by: Bruno Wolff III <bruno@wolff.to> Tested-by: Bruno Wolff III <bruno@wolff.to> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07Input: i8042 - break load dependency between atkbd/psmouse and i8042Dmitry Torokhov
commit 4097461897df91041382ff6fcd2bfa7ee6b2448c upstream. As explained in 1407814240-4275-1-git-send-email-decui@microsoft.com we have a hard load dependency between i8042 and atkbd which prevents keyboard from working on Gen2 Hyper-V VMs. > hyperv_keyboard invokes serio_interrupt(), which needs a valid serio > driver like atkbd.c. atkbd.c depends on libps2.c because it invokes > ps2_command(). libps2.c depends on i8042.c because it invokes > i8042_check_port_owner(). As a result, hyperv_keyboard actually > depends on i8042.c. > > For a Generation 2 Hyper-V VM (meaning no i8042 device emulated), if a > Linux VM (like Arch Linux) happens to configure CONFIG_SERIO_I8042=m > rather than =y, atkbd.ko can't load because i8042.ko can't load(due to > no i8042 device emulated) and finally hyperv_keyboard can't work and > the user can't input: https://bugs.archlinux.org/task/39820 > (Ubuntu/RHEL/SUSE aren't affected since they use CONFIG_SERIO_I8042=y) To break the dependency we move away from using i8042_check_port_owner() and instead allow serio port owner specify a mutex that clients should use to serialize PS/2 command stream. Reported-by: Mark Laws <mdl@60hz.org> Tested-by: Mark Laws <mdl@60hz.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07Input: tegra-kbc - fix inverted reset logicMasahiro Yamada
commit fae16989be77b09bab86c79233e4b511ea769cea upstream. Commit fe6b0dfaba68 ("Input: tegra-kbc - use reset framework") accidentally converted _deassert to _assert, so there is no code to wake up this hardware. Fixes: fe6b0dfaba68 ("Input: tegra-kbc - use reset framework") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-10Input: xpad - validate USB endpoint count during probeCameron Gutman
commit caca925fca4fb30c67be88cacbe908eec6721e43 upstream. This prevents a malicious USB device from causing an oops. Signed-off-by: Cameron Gutman <aicommander@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-10Input: wacom_w8001 - w8001_MAX_LENGTH should be 13Ping Cheng
commit 12afb34400eb2b301f06b2aa3535497d14faee59 upstream. Somehow the patch that added two-finger touch support forgot to update W8001_MAX_LENGTH from 11 to 13. Signed-off-by: Ping Cheng <pingc@wacom.com> Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-07Input: uinput - handle compat ioctl for UI_SET_PHYSRicky Liang
commit affa80bd97f7ca282d1faa91667b3ee9e4c590e6 upstream. When running a 32-bit userspace on a 64-bit kernel, the UI_SET_PHYS ioctl needs to be treated with special care, as it has the pointer size encoded in the command. Signed-off-by: Ricky Liang <jcliang@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-18Input: max8997-haptic - fix NULL pointer dereferenceMarek Szyprowski
commit 6ae645d5fa385f3787bf1723639cd907fe5865e7 upstream. NULL pointer derefence happens when booting with DTB because the platform data for haptic device is not set in supplied data from parent MFD device. The MFD device creates only platform data (from Device Tree) for itself, not for haptic child. Unable to handle kernel NULL pointer dereference at virtual address 0000009c pgd = c0004000 [0000009c] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM (max8997_haptic_probe) from [<c03f9cec>] (platform_drv_probe+0x4c/0xb0) (platform_drv_probe) from [<c03f8440>] (driver_probe_device+0x214/0x2c0) (driver_probe_device) from [<c03f8598>] (__driver_attach+0xac/0xb0) (__driver_attach) from [<c03f67ac>] (bus_for_each_dev+0x68/0x9c) (bus_for_each_dev) from [<c03f7a38>] (bus_add_driver+0x1a0/0x218) (bus_add_driver) from [<c03f8db0>] (driver_register+0x78/0xf8) (driver_register) from [<c0101774>] (do_one_initcall+0x90/0x1d8) (do_one_initcall) from [<c0a00dbc>] (kernel_init_freeable+0x15c/0x1fc) (kernel_init_freeable) from [<c06bb5b4>] (kernel_init+0x8/0x114) (kernel_init) from [<c0107938>] (ret_from_fork+0x14/0x3c) Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 104594b01ce7 ("Input: add driver support for MAX8997-haptic") [k.kozlowski: Write commit message, add CC-stable] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-11Input: ads7846 - correct the value got from SPIAndrey Gelman
commit 879f2fea8a5a748bcbf98d2cdce9139c045505d3 upstream. According to the touch controller spec, SPI return a 16 bit value, only 12 bits are valid, they are bit[14-3]. The value of MISO and MOSI can be configured when SPI is in idle mode. Currently this touch driver assumes the SPI bus sets the MOSI and MISO in low level when SPI bus is in idle mode. So the bit[15] of the value got from SPI bus is always 0. But when SPI bus congfigures the MOSI and MISO in high level during the SPI idle mode, the bit[15] of the value get from SPI is always 1. If bit[15] is not masked, we may get the wrong value. Mask the invalid bit to make sure the correct value gets returned. Regardless of the SPI bus idle configuration. Signed-off-by: Andrey Gelman <andrey.gelman@compulab.co.il> Signed-off-by: Haibo Chen <haibo.chen@freescale.com> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-11Input: zforce_ts - fix dual touch recognitionKnut Wohlrab
commit 6984ab1ab35f422292b7781c65284038bcc0f6a6 upstream. A wrong decoding of the touch coordinate message causes a wrong touch ID. Touch ID for dual touch must be 0 or 1. According to the actual Neonode nine byte touch coordinate coding, the state is transported in the lower nibble and the touch ID in the higher nibble of payload byte five. Signed-off-by: Knut Wohlrab <Knut.Wohlrab@de.bosch.com> Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-04Input: gtco - fix crash on detecting device without endpointsVladis Dronov
commit 162f98dea487206d9ab79fc12ed64700667a894d upstream. The gtco driver expects at least one valid endpoint. If given malicious descriptors that specify 0 for the number of endpoints, it will crash in the probe function. Ensure there is at least one endpoint on the interface before using it. Also let's fix a minor coding style issue. The full correct report of this issue can be found in the public Red Hat Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1283385 Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-12Input: ati_remote2 - fix crashes on detecting device with invalid descriptorVladis Dronov
commit 950336ba3e4a1ffd2ca60d29f6ef386dd2c7351d upstream. The ati_remote2 driver expects at least two interfaces with one endpoint each. If given malicious descriptor that specify one interface or no endpoints, it will crash in the probe function. Ensure there is at least two interfaces and one endpoint for each interface before using it. The full disclosure: http://seclists.org/bugtraq/2016/Mar/90 Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-12Input: ims-pcu - sanity check against missing interfacesOliver Neukum
commit a0ad220c96692eda76b2e3fd7279f3dcd1d8a8ff upstream. A malicious device missing interface can make the driver oops. Add sanity checking. Signed-off-by: Oliver Neukum <ONeukum@suse.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-12Input: powermate - fix oops with malicious USB descriptorsJosh Boyer
commit 9c6ba456711687b794dcf285856fc14e2c76074f upstream. The powermate driver expects at least one valid USB endpoint in its probe function. If given malicious descriptors that specify 0 for the number of endpoints, it will crash. Validate the number of endpoints on the interface before using them. The full report for this issue can be found here: http://seclists.org/bugtraq/2016/Mar/85 Reported-by: Ralf Spenneberg <ralf@spenneberg.net> Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-25Input: i8042 - add Fujitsu Lifebook U745 to the nomux listAurélien Francillon
commit dd0d0d4de582a6a61c032332c91f4f4cb2bab569 upstream. Without i8042.nomux=1 the Elantech touch pad is not working at all on a Fujitsu Lifebook U745. This patch does not seem necessary for all U745 (maybe because of different BIOS versions?). However, it was verified that the patch does not break those (see opensuse bug 883192: https://bugzilla.opensuse.org/show_bug.cgi?id=883192). Signed-off-by: Aurélien Francillon <aurelien@francillon.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-25Input: elantech - mark protocols v2 and v3 as semi-mtBenjamin Tissoires
commit 6544a1df11c48c8413071aac3316792e4678fbfb upstream. When using a protocol v2 or v3 hardware, elantech uses the function elantech_report_semi_mt_data() to report data. This devices are rather creepy because if num_finger is 3, (x2,y2) is (0,0). Yes, only one valid touch is reported. Anyway, userspace (libinput) is now confused by these (0,0) touches, and detect them as palm, and rejects them. Commit 3c0213d17a09 ("Input: elantech - fix semi-mt protocol for v3 HW") was sufficient enough for xf86-input-synaptics and libinput before it has palm rejection. Now we need to actually tell libinput that this device is a semi-mt one and it should not rely on the actual values of the 2 touches. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-25Input: elantech - add Fujitsu Lifebook U745 to force crc_enabledTakashi Iwai
commit 60603950f836ef4e88daddf61a273b91e671db2d upstream. Another Lifebook machine that needs the same quirk as other similar models to make the driver working. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=883192 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01Input: evdev - do not report errors form flush()Takashi Iwai
commit eb38f3a4f6e86f8bb10a3217ebd85ecc5d763aae upstream. We've got bug reports showing the old systemd-logind (at least system-210) aborting unexpectedly, and this turned out to be because of an invalid error code from close() call to evdev devices. close() is supposed to return only either EINTR or EBADFD, while the device returned ENODEV. logind was overreacting to it and decided to kill itself when an unexpected error code was received. What a tragedy. The bad error code comes from flush fops, and actually evdev_flush() returns ENODEV when device is disconnected or client's access to it is revoked. But in these cases the fact that flush did not actually happen is not an error, but rather normal behavior. For non-disconnected devices result of flush is also not that interesting as there is no potential of data loss and even if it fails application has no way of handling the error. Because of that we are better off always returning success from evdev_flush(). Also returning EINTR from flush()/close() is discouraged (as it is not clear how application should handle this error), so let's stop taking evdev->mutex interruptibly. Bugzilla: http://bugzilla.suse.com/show_bug.cgi?id=939834 Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-10Input: usbtouchscreen - avoid unresponsive TSC-30 touch screenBernhard Bender
commit 968491709e5b1aaf429428814fff3d932fa90b60 upstream. This patch fixes a problem in the usbtouchscreen driver for DMC TSC-30 touch screen. Due to a missing delay between the RESET and SET_RATE commands, the touch screen may become unresponsive during system startup or driver loading. According to the DMC documentation, a delay is needed after the RESET command to allow the chip to complete its internal initialization. As this delay is not guaranteed, we had a system where the touch screen occasionally did not send any touch data. There was no other indication of the problem. The patch fixes the problem by adding a 150ms delay between the RESET and SET_RATE commands. Suggested-by: Jakob Mustafa <jakob.mustafa@bytecmed.com> Signed-off-by: Bernhard Bender <bernhard.bender@bytecmed.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-22Input: elantech - fix detection of touchpads where the revision matches a ↵Hans de Goede
known rate commit 5f0ee9d17aae628b22be86966471db65be21f262 upstream. Make the check to skip the rate check more lax, so that it applies to all hw_version 4 models. This fixes the touchpad not being detected properly on Asus PU551LA laptops. Reported-and-tested-by: David Zafra Gómez <dezeta@klo.es> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-22Input: synaptics - add min/max quirk for Lenovo S540Peter Hutterer
commit 7f2ca8b55aeff1fe51ed3570200ef88a96060917 upstream. https://bugzilla.redhat.com/show_bug.cgi?id=1223051#c2 Tested-by: tommy.gagnes@gmail.com Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-06Input: elantech - fix semi-mt protocol for v3 HWBenjamin Tissoires
commit 3c0213d17a09601e0c6c0ae0e27caf70d988290f upstream. When the v3 hardware sees more than one finger, it uses the semi-mt protocol to report the touches. However, it currently works when num_fingers is 0, 1 or 2, but when it is 3 and above, it sends only 1 finger as if num_fingers was 1. This confuses userspace which knows how to deal with extra fingers when all the slots are used, but not when some are missing. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=90101 Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06Input: elantech - fix absolute mode setting on some ASUS laptopsUlrik De Bie
commit bd884149aca61de269fd9bad83fe2a4232ffab21 upstream. On ASUS TP500LN and X750JN, the touchpad absolute mode is reset each time set_rate is done. In order to fix this, we will verify the firmware version, and if it matches the one in those laptops, the set_rate function is overloaded with a function elantech_set_rate_restore_reg_07 that performs the set_rate with the original function, followed by a restore of reg_07 (the register that sets the absolute mode on elantech v4 hardware). Also the ASUS TP500LN and X750JN firmware version, capabilities, and button constellation is added to elantech.c Reported-and-tested-by: George Moutsopoulos <gmoutso@yahoo.co.uk> Signed-off-by: Ulrik De Bie <ulrik.debie-os@e2big.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18HID: wacom: Report ABS_MISC event for Cintiq Companion HybridJason Gerecke
commit 33e5df0e0e32027866e9fb00451952998fc957f2 upstream. It appears that the Cintiq Companion Hybrid does not send an ABS_MISC event to userspace when any of its ExpressKeys are pressed. This is not strictly necessary now that the pad exists on its own device, but should be fixed for consistency's sake. Traditionally both the stylus and pad shared the same device node, and xf86-input-wacom would use ABS_MISC for disambiguation. Not sending this causes the Hybrid to behave incorrectly with xf86-input-wacom beginning with its 8f44f3 commit. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> [killertofu@gmail.com: ported to drivers/input/tablet/wacom_wac.c] Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-05Input: i8042 - add noloop quirk for Medion Akoya E7225 (MD98857)Jochen Hein
commit 1d90d6d5522befa8efa1a7ea406be65cf865ded4 upstream. Without this the aux port does not get detected, and consequently the touchpad will not work. With this patch the touchpad is detected: $ dmesg | grep -E "(SYN|i8042|serio)" pnp 00:03: Plug and Play ACPI device, IDs SYN1d22 PNP0f13 (active) i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126800, board id: 2863, fw id: 1473085 input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 dmidecode excerpt for this laptop is: Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Medion Product Name: Akoya E7225 Version: 1.0 Signed-off-by: Jochen Hein <jochen@jochen.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-02-05Input: synaptics - adjust min/max for Lenovo ThinkPad X1 Carbon 2ndPeter Hutterer
commit 8543cf1c247909ce85850ca6e2714adba351d6aa upstream. LEN0037 found in the Lenovo ThinkPad X1 Carbon 2nd (2014 model) Reported-and-tested-by: Bjoern Olausson <bjoern@olausson.de> Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-29Input: evdev - fix EVIOCG{type} ioctlDmitry Torokhov
commit 7c4f56070fde2367766fa1fb04852599b5e1ad35 upstream. The 'max' size passed into the function is measured in number of bits (KEY_MAX, LED_MAX, etc) so we need to convert it accordingly before trying to copy the data out, otherwise we will try copying too much and end up with up with a page fault. Reported-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-27Input: I8042 - add Acer Aspire 7738 to the nomux listDmitry Torokhov
commit 9333caeaeae4f831054e0e127a6ed3948b604d3e upstream. When KBC is in active multiplexing mode the touchpad on this laptop does not work. Reported-by: Bilal Koc <koc.bilo@googlemail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-27Input: i8042 - reset keyboard to fix Elantech touchpad detectionSrihari Vijayaraghavan
commit 148e9a711e034e06310a8c36b64957934ebe30f2 upstream. On some laptops, keyboard needs to be reset in order to successfully detect touchpad (e.g., some Gigabyte laptop models with Elantech touchpads). Without resettin keyboard touchpad pretends to be completely dead. Based on the original patch by Mateusz Jończyk this version has been expanded to include DMI based detection & application of the fix automatically on the affected models of laptops. This has been confirmed to fix problem by three users already on three different models of laptops. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81331 Signed-off-by: Srihari Vijayaraghavan <linux.bug.reporting@gmail.com> Acked-by: Mateusz Jończyk <mat.jonczyk@o2.pl> Tested-by: Srihari Vijayaraghavan <linux.bug.reporting@gmail.com> Tested by: Zakariya Dehlawi <zdehlawi@gmail.com> Tested-by: Guillaum Bouchard <guillaum.bouchard@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-06Input: xpad - use proper endpoint typeGreg Kroah-Hartman
commit a1f9a4072655843fc03186acbad65990cc05dd2d upstream. The xpad wireless endpoint is not a bulk endpoint on my devices, but rather an interrupt one, so the USB core complains when it is submitted. I'm guessing that the author really did mean that this should be an interrupt urb, but as there are a zillion different xpad devices out there, let's cover out bases and handle both bulk and interrupt endpoints just as easily. Signed-off-by: "Pierre-Loup A. Griffais" <pgriffais@valvesoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-06Input: synaptics - adjust min/max on Thinkpad E540Ben Sagal
commit bce4f9e764c36bc35dd5c9cf9e057c09f422397d upstream. The LEN2006 Synaptics touchpad (as found in Thinkpad E540) returns wrong min max values. touchpad-edge-detector output: > Touchpad SynPS/2 Synaptics TouchPad on /dev/input/event6 > Move one finger around the touchpad to detect the actual edges > Kernel says: x [1472..5674], y [1408..4684] > Touchpad sends: x [1264..5675], y [1171..4688] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88211 Signed-off-by: Binyamin Sagal <bensagal@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-21Input: alps - ignore bad data on Dell Latitudes E6440 and E7440Pali Rohár
commit a7ef82aee91f26da79b981b9f5bca43b8817d3e4 upstream. Sometimes on Dell Latitude laptops psmouse/alps driver receive invalid ALPS protocol V3 packets with bit7 set in last byte. More often it can be reproduced on Dell Latitude E6440 or E7440 with closed lid and pushing cover above touchpad. If bit7 in last packet byte is set then it is not valid ALPS packet. I was told that ALPS devices never send these packets. It is not know yet who send those packets, it could be Dell EC, bug in BIOS and also bug in touchpad firmware... With this patch alps driver does not process those invalid packets, but instead of reporting PSMOUSE_BAD_DATA, getting into out of sync state, getting back in sync with the next byte and spam dmesg we return PSMOUSE_FULL_PACKET. If driver is truly out of sync we'll fail the checks on the next byte and report PSMOUSE_BAD_DATA then. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-21Input: alps - allow up to 2 invalid packets without resetting devicePali Rohár
commit 9d720b34c0a432639252f63012e18b0507f5b432 upstream. On some Dell Latitude laptops ALPS device or Dell EC send one invalid byte in 6 bytes ALPS packet. In this case psmouse driver enter out of sync state. It looks like that all other bytes in packets are valid and also device working properly. So there is no need to do full device reset, just need to wait for byte which match condition for first byte (start of packet). Because ALPS packets are bigger (6 or 8 bytes) default limit is small. This patch increase number of invalid bytes to size of 2 ALPS packets which psmouse driver can drop before do full reset. Resetting ALPS devices take some time and when doing reset on some Dell laptops touchpad, trackstick and also keyboard do not respond. So it is better to do it only if really necessary. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-21Input: alps - ignore potential bare packets when device is out of syncPali Rohár
commit 4ab8f7f320f91f279c3f06a9795cfea5c972888a upstream. 5th and 6th byte of ALPS trackstick V3 protocol match condition for first byte of PS/2 3 bytes packet. When driver enters out of sync state and ALPS trackstick is sending data then driver match 5th, 6th and next 1st bytes as PS/2. It basically means if user is using trackstick when driver is in out of sync state driver will never resync. Processing these bytes as 3 bytes PS/2 data cause total mess (random cursor movements, random clicks) and make trackstick unusable until psmouse driver decide to do full device reset. Lot of users reported problems with ALPS devices on Dell Latitude E6440, E6540 and E7440 laptops. ALPS device or Dell EC for unknown reason send some invalid ALPS PS/2 bytes which cause driver out of sync. It looks like that i8042 and psmouse/alps driver always receive group of 6 bytes packets so there are no missing bytes and no bytes were inserted between valid ones. This patch does not fix root of problem with ALPS devices found in Dell Latitude laptops but it does not allow to process some (invalid) subsequence of 6 bytes ALPS packets as 3 bytes PS/2 when driver is out of sync. So with this patch trackstick input device does not report bogus data when also driver is out of sync, so trackstick should be usable on those machines. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Tested-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-21Input: synaptics - add min/max quirk for Lenovo T440sTakashi Iwai
commit e4742b1e786ca386e88e6cfb2801e14e15e365cd upstream. The new Lenovo T440s laptop has a different PnP ID "LEN0039", and it needs the similar min/max quirk to make its clickpad working. BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=903748 Reported-and-tested-by: Joschi Brauchle <joschibrauchle@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-14Input: i8042 - quirks for Fujitsu Lifebook A544 and Lifebook AH544Hans de Goede
commit 993b3a3f80a7842a48cd46c2b41e1b3ef6302468 upstream. These models need i8042.notimeout, otherwise the touchpad will not work. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=69731 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1111138 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-14Input: i8042 - add noloop quirk for Asus X750LNHans de Goede
commit 9ff84a17302aeb8913ff244ecc0d8f9d219fecb5 upstream. Without this the aux port does not get detected, and consequently the touchpad will not work. https://bugzilla.redhat.com/show_bug.cgi?id=1110011 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05Input: i8042 - add nomux quirk for Avatar AVIU-145A6Hans de Goede
commit d2682118f4bb3ceb835f91c1a694407a31bb7378 upstream. The sys_vendor / product_name are somewhat generic unfortunately, so this may lead to some false positives. But nomux usually does no harm, where as not having it clearly is causing problems on the Avatar AVIU-145A6. https://bugzilla.kernel.org/show_bug.cgi?id=77391 Reported-by: Hugo P <saurosii@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05Input: i8042 - add Fujitsu U574 to no_timeout dmi tableHans de Goede
commit cc18a69c92d0972bc2fc5a047ee3be1e8398171b upstream. https://bugzilla.kernel.org/show_bug.cgi?id=69731 Reported-by: Jason Robinson <mail@jasonrobinson.me> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05Input: atkbd - do not try 'deactivate' keyboard on any LG laptopsDmitry Torokhov
commit c01206796139e2b1feb7539bc72174fef1c6dc6e upstream. We are getting more and more reports about LG laptops not having functioning keyboard if we try to deactivate keyboard during probe. Given that having keyboard deactivated is merely "nice to have" instead of a hard requirement for probing, let's disable it on all LG boxes instead of trying to hunt down particular models. This change is prompted by patches trying to add "LG Electronics"/"ROCKY" and "LG Electronics"/"LW60-F27B" to the DMI list. https://bugzilla.kernel.org/show_bug.cgi?id=77051 Reported-by: Jaime Velasco Juan <jsagarribay@gmail.com> Reported-by: Georgios Tsalikis <georgios@tsalikis.net> Tested-by: Jaime Velasco Juan <jsagarribay@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05Input: elantech - fix detection of touchpad on ASUS s301lHans de Goede
commit 271329b3c798b2102120f5df829071c211ef00ed upstream. Adjust Elantech signature validation to account fo rnewer models of touchpads. Reported-and-tested-by: Màrius Monton <marius.monton@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05Input: synaptics - add support for ForcePadsDmitry Torokhov
commit 5715fc764f7753d464dbe094b5ef9cffa6e479a4 upstream. ForcePads are found on HP EliteBook 1040 laptops. They lack any kind of physical buttons, instead they generate primary button click when user presses somewhat hard on the surface of the touchpad. Unfortunately they also report primary button click whenever there are 2 or more contacts on the pad, messing up all multi-finger gestures (2-finger scrolling, multi-finger tapping, etc). To cope with this behavior we introduce a delay (currently 50 msecs) in reporting primary press in case more contacts appear. Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-05Input: serport - add compat handling for SPIOCSTYPE ioctlJohn Sung
commit a80d8b02751060a178bb1f7a6b7a93645a7a308b upstream. When running a 32-bit inputattach utility in a 64-bit system, there will be error code "inputattach: can't set device type". This is caused by the serport device driver not supporting compat_ioctl, so that SPIOCSTYPE ioctl fails. Signed-off-by: John Sung <penmount.touch@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-31Input: fix defuzzing logicDmitry Torokhov
commit 50c5d36dab930b1f1b1e3348b8608aa8b9ee7610 upstream. We attempt to remove noise from coordinates reported by devices in input_handle_abs_event(), unfortunately, unless we were dropping the event altogether, we were ignoring the adjusted value and were passing on the original value instead. Reviewed-by: Andrew de los Reyes <adlr@chromium.org> Reviewed-by: Benson Leung <bleung@chromium.org> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Henrik Rydberg <rydberg@euromail.se> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-31Input: synaptics - add min/max quirk for pnp-id LEN2002 (Edge E531)Hans de Goede
commit e76aed9da7189eeb41b9856552ce5721181e8e8d upstream. https://bugzilla.redhat.com/show_bug.cgi?id=1114768 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06Input: elantech - don't set bit 1 of reg_10 when the no_hw_res quirk is setHans de Goede
commit fb4f8f568a9def02240ef9bf7aabd246dc63a081 upstream. The touchpad on the GIGABYTE U2442 not only stops communicating when we try to set bit 3 (enable real hardware resolution) of reg_10, but on some BIOS versions also when we set bit 1 (enable two finger mode auto correct). I've asked the original reporter of: https://bugzilla.kernel.org/show_bug.cgi?id=61151 To check that not setting bit 1 does not lead to any adverse effects on his model / BIOS revision, and it does not, so this commit fixes the touchpad not working on these versions by simply never setting bit 1 for laptop models with the no_hw_res quirk. Reported-and-tested-by: James Lademann <jwlademann@gmail.com> Tested-by: Philipp Wolfer <ph.wolfer@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06Input: elantech - deal with clickpads reporting right button eventsHans de Goede
commit cd9e83e2754465856097f31c7ab933ce74c473f8 upstream. At least the Dell Vostro 5470 elantech *clickpad* reports right button clicks when clicked in the right bottom area: https://bugzilla.redhat.com/show_bug.cgi?id=1103528 This is different from how (elantech) clickpads normally operate, normally no matter where the user clicks on the pad the pad always reports a left button event, since there is only 1 hardware button beneath the path. It looks like Dell has put 2 buttons under the pad, one under each bottom corner, causing this. Since this however still clearly is a real clickpad hardware-wise, we still want to report it as such to userspace, so that things like finger movement in the bottom area can be properly ignored as it should be on clickpads. So deal with this weirdness by simply mapping a right click to a left click on elantech clickpads. As an added advantage this is something which we can simply do on all elantech clickpads, so no need to add special quirks for this weird model. Reported-and-tested-by: Elder Marco <eldermarco@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-06Input: synaptics - fix resolution for manually provided min/maxBenjamin Tissoires
commit d49cb7aeebb974713f9f7ab2991352d3050b095b upstream. commit 421e08c41fda fixed the reported min/max for the X and Y axis, but unfortunately, it broke the resolution of those same axis. On the t540p, the resolution is the same regarding X and Y. It is not a problem for xf86-input-synaptics because this driver is only interested in the ratio between X and Y. Unfortunately, xf86-input-cmt uses directly the resolution, and having a null resolution leads to some divide by 0 errors, which are translated by -infinity in the resulting coordinates. Reported-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07Input: synaptics - change min/max quirk table to pnp-id matchingHans de Goede
commit 0f68f39c393bc06ac5ccc8794f0e2ed841e41c3e upstream. Most of the affected models share pnp-ids for the touchpad. So switching to pnp-ids give us 2 advantages: 1) It shrinks the quirk list 2) It will lower the new quirk addition frequency, ie the recently added W540 quirk would not have been necessary since it uses the same LEN0034 pnp ids as other models already added before it As an added bonus it actually puts the quirk on the actual psmouse, rather then on the machine, which is technically more correct. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07Input: synaptics - add a matches_pnp_id helper functionHans de Goede
commit e2f611029b370bb7a04236215ad4b36aa8cb98cd upstream. This is a preparation patch for simplifying the min/max quirk table. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-07Input: synaptics - T540p - unify with other LEN0034 modelsHans de Goede
commit 6d396ede224dc596d92d7cab433713536e68916c upstream. The T540p has a touchpad with pnp-id LEN0034, all the models with this pnp-id have the same min/max values, except the T540p where the values are slightly off. Fix them to be identical. This is a preparation patch for simplifying the quirk table. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-05-08 01:27:19 +0000