summaryrefslogtreecommitdiff
path: root/drivers/iio/dac/Kconfig
AgeCommit message (Collapse)Author
2026-03-22iio: dac: ds4424: convert to regmapOleksij Rempel
Refactor the driver to use the regmap API. Replace the driver-specific mutex and manual shadow buffers with the standard regmap infrastructure for locking and caching. This ensures the cache is populated from hardware at probe, preventing state desynchronization (e.g. across suspend/resume). Define access tables to validate the different register maps of DS44x2 and DS44x4. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Sander Vanheule <sander@svanheule.net> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2026-01-23iio: dac: Add MAX22007 DAC driver supportJanani Sunil
Add support for the MAX22007 4 channel DAC that drives a voltage or current output on each channel. Signed-off-by: Janani Sunil <janani.sunil@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-12-31iio: dac: adding support for Microchip MCP47FEB02Ariana Lazar
This is the iio driver for Microchip MCP47F(E/V)B(0/1/2)1, MCP47F(E/V)B(0/1/2)2, MCP47F(E/V)B(0/1/2)4 and MCP47F(E/V)B(0/1/2)8 series of buffered voltage output Digital-to-Analog Converters with nonvolatile or volatile memory and an I2C Interface. The families support up to 8 output channels. The devices can be 8-bit, 10-bit and 12-bit. Signed-off-by: Ariana Lazar <ariana.lazar@microchip.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-11-09iio: dac: ad5446: Separate I2C/SPI into different driversNuno Sá
Properly separate the I2C and SPI drivers into two different drivers living in their own source file (as usual). So that no need for the hacky ifdefery. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-05-21iio: dac: ad3530r: Add driver for AD3530R and AD3531RKim Seer Paller
The AD3530/AD3530R (8-channel) and AD3531/AD3531R (4-channel) are low-power, 16-bit, buffered voltage output DACs with software- programmable gain controls, providing full-scale output spans of 2.5V or 5V for reference voltages of 2.5V. These devices operate from a single 2.7V to 5.5V supply and are guaranteed monotonic by design. The "R" variants include a 2.5V, 5ppm/°C internal reference, which is disabled by default. Support for monitoring internal die temperature, output voltages, and current of a selected channel via the MUXOUT pin using an external ADC is currently not implemented. Reviewed-by: David Lechner <dlechner@baylibre.com> Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com> Reviewed-by: Andy Shevchenko <andy@kernel.org> Link: https://patch.msgid.link/20250429-togreg-v7-3-0af9c543b545@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2025-02-11iio: dac: ad5791: Add offload supportAxel Haslam
Add SPI offload support to stream TX buffers using DMA. This allows loading samples to the DAC with a rate of 1 MSPS. Signed-off-by: Axel Haslam <ahaslam@baylibre.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Signed-off-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20250207-dlech-mainline-spi-engine-offload-2-v8-17-e48a489be48c@baylibre.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-28iio: dac: Support ROHM BD79703 DACMatti Vaittinen
The ROHM BD79703 is a 6 channel digital to analog converter. Based on the data-sheet examples the hardware would support setting the DAC word without changing the actual output. The data-sheet is not too specific on how the enabling the output of new voltage set by DAC should be done - hence this is not implemented by the driver. The BD79703 would also support two specific "PULL_DOWN" modes. These aren't currently supported by the driver either. Add a very basic support for controlling the channel outputs one-by-one. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://patch.msgid.link/bc77d7b979ca28408a216f597082fcd94ec63be7.1734608215.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-12-07iio: dac: Fix converters spelling typo.Karan Sanghavi
Correct the converters typo error "convertors" => "converters" Signed-off-by: Karan Sanghavi <karansanghvi98@gmail.com> Link: https://patch.msgid.link/20241111-dackconfigcodespell-v1-1-2498567be34c@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-11-09Merge commit '9365f0de4303f82ed4c2db1c39d3de824b249d80' into HEADJonathan Cameron
Merge v6.12-rc6 via char-misc-next to get some fixes needed for next few patches in IIO.
2024-11-05Merge 6.12-rc6 into char-misc-nextGreg Kroah-Hartman
We need the char/misc/iio fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-11-03iio: dac: ad3552r: add high-speed platform driverAngelo Dureghello
Add High Speed ad3552r platform driver. The ad3552r DAC is controlled by a custom (fpga-based) DAC IP through the current AXI backend, or similar alternative IIO backend. Compared to the existing driver (ad3552r.c), that is a simple SPI driver, this driver is coupled with a DAC IIO backend that finally controls the ad3552r by a fpga-based "QSPI+DDR" interface, to reach maximum transfer rate of 33MUPS using dma stream capabilities. All commands involving QSPI bus read/write are delegated to the backend through the provided APIs for bus read/write. Reviewed-by: Nuno Sa <nuno.sa@analog.com> Signed-off-by: Angelo Dureghello <adureghello@baylibre.com> Reviewed-by: David Lechner <dlechner@baylibre.com> Link: https://patch.msgid.link/20241028-wip-bl-ad3552r-axi-v0-iio-testing-v9-7-f6960b4f9719@kernel-space.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-24iio: dac: Kconfig: Fix build error for ltc2664Jinjie Ruan
If REGMAP_SPI is n and LTC2664 is y, the following build error occurs: riscv64-unknown-linux-gnu-ld: drivers/iio/dac/ltc2664.o: in function `ltc2664_probe': ltc2664.c:(.text+0x714): undefined reference to `__devm_regmap_init_spi' Select REGMAP_SPI instead of REGMAP for LTC2664 to fix it. Fixes: 4cc2fc445d2e ("iio: dac: ltc2664: Add driver for LTC2664 and LTC2672") Reviewed-by: Nuno Sa <nuno.sa@analog.com> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://patch.msgid.link/20241024015553.1111253-1-ruanjinjie@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-21Merge 6.12-rc4 into char-misc-nextGreg Kroah-Hartman
We need the iio fixes from 6.12-rc4 in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-06iio: dac: stm32-dac-core: add missing select REGMAP_MMIO in KconfigJavier Carrasco
This driver makes use of regmap_mmio, but does not select the required module. Add the missing 'select REGMAP_MMIO'. Fixes: 4d4b30526eb8 ("iio: dac: add support for stm32 DAC") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241003-ad2s1210-select-v1-8-4019453f8c33@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06iio: dac: ltc1660: add missing select REGMAP_SPI in KconfigJavier Carrasco
This driver makes use of regmap_spi, but does not select the required module. Add the missing 'select REGMAP_SPI'. Fixes: 8316cebd1e59 ("iio: dac: add support for ltc1660") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241003-ad2s1210-select-v1-7-4019453f8c33@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06iio: dac: ad5770r: add missing select REGMAP_SPI in KconfigJavier Carrasco
This driver makes use of regmap_spi, but does not select the required module. Add the missing 'select REGMAP_SPI'. Fixes: cbbb819837f6 ("iio: dac: ad5770r: Add AD5770R support") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241003-ad2s1210-select-v1-6-4019453f8c33@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06iio: dac: ad5766: add missing select IIO_(TRIGGERED_)BUFFER in KconfigJavier Carrasco
This driver makes use of triggered buffers, but does not select the required modules. Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'. Fixes: 885b9790c25a ("drivers:iio:dac:ad5766.c: Add trigger buffer") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241003-iio-select-v1-8-67c0385197cd@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-10-06iio: dac: ad3552r: add missing select IIO_(TRIGGERED_)BUFFER in KconfigJavier Carrasco
This driver makes use of triggered buffers, but does not select the required modules. Add the missing 'select IIO_BUFFER' and 'select IIO_TRIGGERED_BUFFER'. Fixes: 8f2b54824b28 ("drivers:iio:dac: Add AD3552R driver support") Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://patch.msgid.link/20241003-iio-select-v1-7-67c0385197cd@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-09-30iio: dac: support the ad8460 Waveform DACMariel Tinaco
The AD8460 is a “bits in, power out” high voltage, high-power, high-speed driver optimized for large output current (up to ±1 A) and high slew rate (up to ±1800 V/μs) at high voltage (up to ±40 V) into capacitive loads. A digital engine implements user-configurable features: modes for digital input, programmable supply current, and fault monitoring and programmable protection settings for output current, output voltage, and junction temperature. The AD8460 operates on high voltage dual supplies up to ±55 V and a single low voltage supply of 5 V. Signed-off-by: Mariel Tinaco <Mariel.Tinaco@analog.com> Link: https://patch.msgid.link/20240912095435.18639-3-Mariel.Tinaco@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-08-03iio: dac: ltc2664: Add driver for LTC2664 and LTC2672Kim Seer Paller
LTC2664 4 channel, 12-/16-Bit Voltage Output SoftSpan DAC LTC2672 5 channel, 12-/16-Bit Current Output Softspan DAC Reviewed-by: Nuno Sa <nuno.sa@analog.com> Co-developed-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Kim Seer Paller <kimseer.paller@analog.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://patch.msgid.link/20240718051834.32270-7-kimseer.paller@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-07-01Merge 6.10-rc6 into char-misc-nextGreg Kroah-Hartman
We need the char/misc/iio fixes in here as well to build on top of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-13iio: dac: adi-axi-dac: add platform dependenciesNuno Sa
Being this device a soft core, it's only supported on some/specific platforms. Hence add proper dependencies for the supported platforms. Also add COMPILE_TEST to increase the build coverage. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240604-dev-axi-dac-kconfig-v1-1-99ccd03938d1@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-06-09iio: dac: fix ad9739a random config compile errorKe Sun
WARNING: unmet direct dependencies detected for REGMAP_SPI Depends on [n]: SPI [=n] Selected by [m]: - AD9739A [=m] && IIO [=m] && (SPI [=n] || COMPILE_TEST [=y]) ... ERROR: modpost: "spi_write_then_read" [drivers/base/regmap/regmap-spi.ko] undefined! ERROR: modpost: "spi_async" [drivers/base/regmap/regmap-spi.ko] undefined! ERROR: modpost: "spi_sync" [drivers/base/regmap/regmap-spi.ko] undefined! ERROR: modpost: "__spi_register_driver" [drivers/iio/dac/ad9739a.ko] undefined! Fixes: e77603d5468b ("iio: dac: support the ad9739a RF DAC") Reported-by: k2ci <kernel-bot@kylinos.cn> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202404250156.2PQRWmex-lkp@intel.com/ Signed-off-by: Ke Sun <sunke@kylinos.cn> Reviewed-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240609030847.2869455-1-sunke@kylinos.cn Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-04-20iio: dac: support the ad9739a RF DACNuno Sa
The AD9739A is a 14-bit, 2.5 GSPS high performance RF DACs that are capable of synthesizing wideband signals from DC up to 3 GHz. A dual-port, source synchronous, LVDS interface simplifies the digital interface with existing FGPA/ASIC technology. On-chip controllers are used to manage external and internal clock domain variations over temperature to ensure reliable data transfer from the host to the DAC core. Co-developed-by: Dragos Bogdan <dragos.bogdan@analog.com> Signed-off-by: Dragos Bogdan <dragos.bogdan@analog.com> Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240419-iio-backend-axi-dac-v4-10-5ca45b4de294@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-04-20iio: dac: add support for AXI DAC IP coreNuno Sa
Support the Analog Devices Generic AXI DAC IP core. The IP core is used for interfacing with digital-to-analog (DAC) converters that require either a high-speed serial interface (JESD204B/C) or a source synchronous parallel interface (LVDS/CMOS). Typically (for such devices) SPI will be used for configuration only, while this IP core handles the streaming of data into memory via DMA. Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240419-iio-backend-axi-dac-v4-9-5ca45b4de294@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-12-21iio: dac: driver for MCP4821Anshul Dalal
Adds driver for the MCP48xx series of DACs. Device uses a simplex SPI channel. To set the value of an output channel, a 16-bit data of following format must be written: Bit field | Description 15 [MSB] | Channel selection bit 0 -> Channel A 1 -> Channel B 13 | Output Gain Selection bit 0 -> 2x Gain (Vref = 4.096V) 1 -> 1x Gain (Vref = 2.048V) 12 | Output Shutdown Control bit 0 -> Shutdown the selected channel 1 -> Active mode operation 11-0 [LSB]| DAC Input Data bits Value's big endian representation is taken as input for the selected DAC channel. For devices with a resolution of less than 12-bits, only the x most significant bits are considered where x is the resolution of the device. Reference: Page#22 [MCP48x2 Datasheet] Supported devices: +---------+--------------+-------------+ | Device | Resolution | Channels | |---------|--------------|-------------| | MCP4801 | 8-bit | 1 | | MCP4802 | 8-bit | 2 | | MCP4811 | 10-bit | 1 | | MCP4812 | 10-bit | 2 | | MCP4821 | 12-bit | 1 | | MCP4822 | 12-bit | 2 | +---------+--------------+-------------+ Devices tested: MCP4821 [12-bit single channel] MCP4802 [8-bit dual channel] Tested on Raspberry Pi Zero 2W Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/22244B.pdf #MCP48x1 Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/20002249B.pdf #MCP48x2 Signed-off-by: Anshul Dalal <anshulusr@gmail.com> Link: https://lore.kernel.org/r/20231220151954.154595-2-anshulusr@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-08-05iio: add MCP4728 I2C DAC driverAndrea Collamati
MCP4728 is a 12-bit quad channel DAC with I2C interface. support for: * per-channel gain * per-channel power state * per-channel power down mode control * per-channel vref selection internal/vdd * store current state to on-chip EEPROM Signed-off-by: Andrea Collamati <andrea.collamati@gmail.com> Link: https://lore.kernel.org/r/a0933003ed3c855f9d80d6ce0a40add2b6f0ba36.1691066050.git.andrea.collamati@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-03-18iio: dac: cio-dac: Migrate to the regmap APIWilliam Breathitt Gray
The regmap API supports IO port accessors so we can take advantage of regmap abstractions rather than handling access to the device registers directly in the driver. Includes trivial header inclusion tidy up. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: William Breathitt Gray <william.gray@linaro.org> Link: https://lore.kernel.org/r/20230311140218.74920-1-william.gray@linaro.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-01-21iio: dac: add support for max5522Angelo Dureghello
Add initial support for DAC max5522. Tested writing DAC A and B with some values, from 0 to 1023, measured output voltages, driver works properly. Additions for max5523/24/25 will follow. Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com> Link: https://lore.kernel.org/r/20221106165928.223318-1-angelo.dureghello@timesys.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-12-28iio: dac: ad5686: Add support for AD5337Fabio Estevam
AD5337 belongs to the same family as the AD5338. The difference is that the AD5337 has 8-bit precision instead of 10-bit. Add support for the AD5337 chip in the driver. Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20221130182632.3856675-2-festevam@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-06-11iio: dac: ti-dac5571: add support for ti,dac121c081Peter Rosin
It fits right in as a single 12-bit DAC. Reviewed-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Peter Rosin <peda@axentia.se> Link: https://lore.kernel.org/r/a09a49a5-3d01-21f7-02ed-b191d70e7609@axentia.se Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: dac: dpot: Drop dependency on OFAndy Shevchenko
Nothing in this driver depends on OF firmware so drop the dependency to remove the false impression such a dependency exists. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220413190632.30365-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: dac: lpc18xx: Drop dependency on OFAndy Shevchenko
Nothing in this driver depends on OF firmware so drop the dependency to remove the false impression such a dependency exists. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220413190819.38206-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-04-28iio: dac: vf610: Drop dependency on OFAndy Shevchenko
Nothing in this driver depends on OF firmware so drop the dependency to remove the false impression such a dependency exists. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220413191611.46204-1-andriy.shevchenko@linux.intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2022-03-01iio: dac: add support for ltc2688Nuno Sá
The LTC2688 is a 16 channel, 16 bit, +-15V DAC with an integrated precision reference. It is guaranteed monotonic and has built in rail-to-rail output buffers that can source or sink up to 20 mA. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20220225130129.69-2-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-12-16drivers:iio:dac: Add AD3552R driver supportMihail Chindris
The AD3552R-16 is a low drift ultrafast, 16-bit accuracy, current output digital-to-analog converter (DAC) designed to generate multiple output voltage span ranges. The AD3552R-16 operates with a fixed 2.5V reference. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ad3552r.pdf Signed-off-by: Mihail Chindris <mihail.chindris@analog.com> Link: https://lore.kernel.org/r/20211213110825.244347-3-mihail.chindris@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-12-12iio:adc/dac:Kconfig: Update to drop OF dependencies.Jonathan Cameron
We could probably drop a lot more of these, but for now this removes unnecessary restrictions on stand alone ADC devices. For these 3 drivers the false dependency seems to date all the way back to their initial introduction. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
2021-12-04iio:dac:ad7293: add support for AD7293Antoniu Miclaus
The AD7293 is a Power Amplifier drain current controller containing functionality for general-purpose monitoring and control of current, voltage, and temperature, integrated into a single chip solution with an SPI-compatible interface. Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/AD7293.pdf Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com> Reviewed-by: Cai Huoqing <cai.huoqing@linux.dev> Link: https://lore.kernel.org/r/20211202150819.24832-1-antoniu.miclaus@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-03-11iio: dac: ad5686: Add support for AD5673R/AD5677RMircea Caprioru
The AD5673R/AD5677R are low power, 16-channel, 12-/16-bit buffered voltage output digital-to-analog converters (DACs). They include a 2.5 V internal reference (enabled by default). These devices are very similar to AD5674R/AD5679R, except that they have an i2c interface. Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20210217074102.23148-1-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-01-22iio: dac: ad5766: add driver support for AD5766Cristian Pop
The AD5766/AD5767 are 16-channel, 16-bit/12-bit, voltage output dense DACs Digital-to-Analog converters. This change adds support for these DACs. Signed-off-by: Cristian Pop <cristian.pop@analog.com> Link: https://lore.kernel.org/r/20210115112105.58652-3-cristian.pop@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-10-10iio: dac: ad5686: add support for AD5338RMichael Auchter
The AD5338R is a 10-bit DAC with 2 outputs and an internal 2.5V reference (enabled by default). The register configuration is nearly identical to the AD5696R DAC that's already supported by this driver, with the channel selection bits being the only thing different. Signed-off-by: Michael Auchter <michael.auchter@ni.com> Link: https://lore.kernel.org/r/20200924195215.49443-1-michael.auchter@ni.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-05-03iio: DAC extension for ltc2634-12/10/8Chris Ruehl
This patch add support for Analog Devices (Linear Technology) LTC2634 Quad 12-/10-/8-Bit Rail-to-Rail DAC. The SPI functionality based on them from LTC2632 therefor add the definitions only and update the Kconfig. Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: dac: Kconfig: sort symbols alphabeticallyAlexandru Ardelean
While adding a new device, I noticed these aren't sorted alphabetically [as in the Makefile], which messed my head-up. This change sorts the devices alphabetically in the drivers/iio/dac/Kconfig file as well. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-03-08iio: dac: ad5770r: Add AD5770R supportAlexandru Tachici
The AD5770R is a 6-channel, 14-bit resolution, low noise, programmable current output digital-to-analog converter (DAC) for photonics control applications. It contains five 14-bit resolution current sourcing DAC channels and one 14-bit resolution current sourcing/sinking DAC channel. Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-02-14iio: dac: ltc2632: add support for LTC2636 familyUwe Kleine-König
The only difference between LTC2632 and LTC2636 is that the former has two DAC channels while the latter has eight. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-11-10iio: dac: ad5446: Add support for new AD5600 DACStefan Popa
The AD5600 is a single channel, 16-bit resolution, voltage output digital to analog converter (DAC). The AD5600 uses a 3-wire SPI interface. It is part of the AD5541 family of DACs. The ad5446 IIO driver implements support for some of these DACs (in the AD5441 family), so the change is a simple entry in this driver. Link: https://www.analog.com/media/en/technical-documentation/data-sheets/AD5600.pdf Signed-off-by: Stefan Popa <stefan.popa@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-09iio:dac:ti-dac7612: Add driver for Texas Instruments DAC7612Ricardo Ribalda Delgado
It is a driver for Texas Instruments Dual, 12-Bit Serial Input Digital-to-Analog Converter. Datasheet of this chip: http://www.ti.com/lit/ds/sbas106/sbas106.pdf Signed-off-by: Ricardo Ribalda Delgado <ricardo@ribalda.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-01-12iio: dac: ad5686: Add support for AD5674R/AD5679RMircea Caprioru
The AD5674R/AD5679R are low power, 16-channel, 12-/16-bit buffered voltage output digital-to-analog converters (DACs). They include a 2.5 V internal reference (enabled by default). These devices are very similar to AD5684R/AD5686R, except that they have 16 channels. Signed-off-by: Mircea Caprioru <mircea.caprioru@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit v1.2.3 (git 2.25.1) at 2026-06-09 07:23:52 +0000