| Age | Commit message (Collapse) | Author |
|---|
|
Enable PLL clock on DDI by moving part of the PLL enabling
sequence into a DDI clock enabling function.
v2: Reuse intel_mtl_pll_enable_clock for DDI clock enabling
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-17-mika.kahola@intel.com
|
|
Add .crtc_get_dpll function pointer to support xe3plpd
platform.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-16-mika.kahola@intel.com
|
|
Add .get_freq function hook to support dpll framework for xe3plpd platform.
v2: Restore port clock calculation (Suraj)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-15-mika.kahola@intel.com
|
|
Add .get_hw_state hook to xe3plpd platform for dpll framework
and update intel_lt_phy_pll_readout_hw_state() function
accordingly to support dpll framework.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-14-mika.kahola@intel.com
|
|
Add .compare_hw_state function pointer for xe3plpd platform
to support dpll framework.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-13-mika.kahola@intel.com
|
|
Add .dump_hw_state function pointer for xe3plpd platform
to support dpll framework. While at it, switch to use
drm_printer structure to print hw state information.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-12-mika.kahola@intel.com
|
|
Add .update_dpll_ref_clks function pointer to xe3plpd
platform to support dpll framework. Reuse ICL
function pointer.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-11-mika.kahola@intel.com
|
|
Add .update_active_dpll function pointer to support
dpll framework for xe3plpd platform. Reuse ICL function
pointer.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-10-mika.kahola@intel.com
|
|
Add .put_dplls function pointer to support xe3plpd platform
on dpll framework. Reuse ICL function pointer.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-9-mika.kahola@intel.com
|
|
Add .get_dplls function pointer for xe3plpd platforms
to support dpll framework. Reuse the ICL function
pointer.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-8-mika.kahola@intel.com
|
|
Add compute dpll hook for xe3plpd platform and bring
PLL state calculation to support PLL framework.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-7-mika.kahola@intel.com
|
|
Cache lane count as part of PLL state.
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-6-mika.kahola@intel.com
|
|
The LT PHY implementation currently pulls PLL and port_clock
information directly from the CRTC state. This ties the PHY
programming logic too tightly to the CRTC state and makes it
harder to clearly express the PHY’s own PLL configuration.
Introduce an explicit "struct intel_lt_phy_pll_state" argument
for the PHY functions and update callers accordingly.
No functional change is intended — this is a preparatory cleanup for
to bring LT PHY PLL handling as part of PLL framework.
v2: DP, HDMI 2.0, and HDMI FRL modes are port of the VDR configuration 0
register. These modes are defined by bits 2:0. Decode these to
differentiate DP and HDMI modes when programming PLL's. (Imre, Suraj)
v3: Pass port_clock as argument instead of recalculating it (Suraj)
v4: Fix checkpatch warning of line length exceeding 100 columns
BSpec: 744921
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-5-mika.kahola@intel.com
|
|
Start bringing in xe3plpd as part of dpll framework. The work is
started by adding PLL information and related function hooks.
v2: Fix xe3plpd type (Suraj)
Remove empty line between BSpec link and Signed-off-by (Suraj)
BSpec: 74304
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-4-mika.kahola@intel.com
|
|
Add check for PLL enabling and return early if
PLL is not enabled.
v2: Use PCLK PLL ACK bit to check if PLL is enabled (Suraj)
v3: Check only if PCLK PLL ACK bit for lane 0 is enabled (Suraj)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-3-mika.kahola@intel.com
|
|
Dump missing PLL structure members ssc_enabled and tbt_mode
in order to enhance debugging.
v2: Drop addr_lsb and addr_msb printouts
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260312080657.2648265-2-mika.kahola@intel.com
|
|
The command-queue structure has a `dma_handle` method that returns the
DMA handle to the memory segment shared with the GSP. This works, but is
not ideal for the following reasons:
- That method is effectively only ever called once, and is technically
an accessor method since the handle doesn't change over time,
- It feels a bit out-of-place with the other methods of `Cmdq` which
only deal with the sending or receiving of messages,
- The method has `pub(crate)` visibility, allowing other driver code to
access this highly-sensitive handle.
Address all these issues by turning `dma_handle` into a struct member
with `pub(super)` visibility. This keeps the method space focused, and
also ensures the member is not visible outside of the modules that need
it.
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260319-b4-cmdq-dma-handle-v1-1-57840b4a4f90@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
Clearing the DP tunnel stream BW in the atomic state involves getting
the tunnel group state, which can fail. Handle the error accordingly.
This fixes at least one issue where drm_dp_tunnel_atomic_set_stream_bw()
failed to get the tunnel group state returning -EDEADLK, which wasn't
handled. This lead to the ctx->contended warn later in modeset_lock()
while taking a WW mutex for another object in the same atomic state, and
thus within the same already contended WW context.
Moving intel_crtc_state_alloc() later would avoid freeing saved_state on
the error path; this stable patch leaves that simplification for a
follow-up.
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.9+
Fixes: a4efae87ecb2 ("drm/i915/dp: Compute DP tunnel BW during encoder state computation")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7617
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260320092900.13210-1-imre.deak@intel.com
(cherry picked from commit fb69d0076e687421188bc8103ab0e8e5825b1df1)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
XE_WEDGED_MODE_UPON_ANY_HANG_NO_RESET is intended for debugging hangs,
so wedge the device with 'none' recovery method and have it available
to the user for debugging.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260305130720.3685754-4-raag.jadav@intel.com
|
|
Update log for 'none' recovery method for wedged event where driver wants
to hint "no recovery" without resetting the device from driver context.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260305130720.3685754-3-raag.jadav@intel.com
|
|
Remove all usages of dma::CoherentAllocation and use the new
dma::Coherent type instead.
Signed-off-by: Gary Guo <gary@garyguo.net>
Co-developed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260320194626.36263-9-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Convert libos (LibosMemoryRegionInitArgument) and rmargs
(GspArgumentsPadded) to use CoherentBox / Coherent::init() and simplify
the initialization. This also avoids separate initialization on the
stack.
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260320194626.36263-8-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Convert wpr_meta to use Coherent::init() and simplify the
initialization. It also avoids a separate initialization of
GspFwWprMeta on the stack.
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260320194626.36263-7-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
We need the latest GPU buddy changes from drm-misc-next-2026-03-12 in
drm-rust-next as well, as the Rust abstractions are built on top of it.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
The hardware teams noticed that the originally documented workaround
steps for Wa_16025250150 may not be sufficient to fully avoid a hardware
issue. The workaround documentation has been augmented to suggest
programming one additional register; make the corresponding change in
the driver.
Fixes: 7654d51f1fd8 ("drm/xe/xe2hpg: Add Wa_16025250150")
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patch.msgid.link/20260319-wa_16025250150_part2-v1-1-46b1de1a31b2@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Forcibly disable the OD_FAN_CURVE feature when temperature or PWM range is invalid,
otherwise PMFW will reject this configuration on smu v13.0.x
example:
$ sudo cat /sys/bus/pci/devices/<BDF>/gpu_od/fan_ctrl/fan_curve
OD_FAN_CURVE:
0: 0C 0%
1: 0C 0%
2: 0C 0%
3: 0C 0%
4: 0C 0%
OD_RANGE:
FAN_CURVE(hotspot temp): 0C 0C
FAN_CURVE(fan speed): 0% 0%
$ echo "0 50 40" | sudo tee fan_curve
kernel log:
[ 756.442527] amdgpu 0000:03:00.0: amdgpu: Fan curve temp setting(50) must be within [0, 0]!
[ 777.345800] amdgpu 0000:03:00.0: amdgpu: Fan curve temp setting(50) must be within [0, 0]!
Closes: https://github.com/ROCm/amdgpu/issues/208
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 470891606c5a97b1d0d937e0aa67a3bed9fcb056)
Cc: stable@vger.kernel.org
|
|
When SET_UCLK_MAX capability is absent, return -EOPNOTSUPP from
smu_v13_0_6_emit_clk_levels() for OD_MCLK instead of 0. This makes
unsupported OD_MCLK reporting consistent with other clock types
and allows callers to skip the entry cleanly.
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d82e0a72d9189e8acd353988e1a57f85ce479e37)
Cc: stable@vger.kernel.org
|
|
Only reapply UCLK soft limits during PP_OD_RESTORE_DEFAULT when the
current max differs from the DPM table max. This avoids redundant
SMC updates and prevents -EINVAL on restore when no change is needed.
Fixes: b7a900344546 ("drm/amd/pm: Allow setting max UCLK on SMU v13.0.6")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 17f11bbbc76c8e83c8474ea708316b1e3631d927)
|
|
[WHAT]
When a sink is connected, aconnector->drm_edid was overwritten without
freeing the previous allocation, causing a memory leak on resume.
[HOW]
Free the previous drm_edid before updating it.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 52024a94e7111366141cfc5d888b2ef011f879e5)
Cc: stable@vger.kernel.org
|
|
PASID resue could cause interrupt issue when process
immediately runs into hw state left by previous
process exited with the same PASID, it's possible that
page faults are still pending in the IH ring buffer when
the process exits and frees up its PASID. To prevent the
case, it uses idr cyclic allocator same as kernel pid's.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8f1de51f49be692de137c8525106e0fce2d1912d)
Cc: stable@vger.kernel.org
|
|
amdgpu_device_get_job_timeout_settings() passes a pointer directly
to the global amdgpu_lockup_timeout[] buffer into strsep().
strsep() destructively replaces delimiter characters with '\0'
in-place.
On multi-GPU systems, this function is called once per device.
When a multi-value setting like "0,0,0,-1" is used, the first
GPU's call transforms the global buffer into "0\00\00\0-1". The
second GPU then sees only "0" (terminated at the first '\0'),
parses a single value, hits the single-value fallthrough
(index == 1), and applies timeout=0 to all rings — causing
immediate false job timeouts.
Fix this by copying into a stack-local array before calling
strsep(), so the global module parameter buffer remains intact
across calls. The buffer is AMDGPU_MAX_TIMEOUT_PARAM_LENGTH
(256) bytes, which is safe for the stack.
v2: wrap commit message to 72 columns, add Assisted-by tag.
v3: use stack array with strscpy() instead of kstrdup()/kfree()
to avoid unnecessary heap allocation (Christian).
This patch was developed with assistance from Claude (claude-opus-4-6).
Assisted-by: Claude:claude-opus-4-6
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 94d79f51efecb74be1d88dde66bdc8bfcca17935)
Cc: stable@vger.kernel.org
|
|
Starting with commit 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in
atomic check"), amdgpu resets the CRTC state mode_changed flag to false when
recomputing the DSC configuration results in no timing change for a particular
stream.
However, this is incorrect in scenarios where a change in MST/DSC configuration
happens in the same KMS commit as another (unrelated) mode change. For example,
the integrated panel of a laptop may be configured differently (e.g., HDR
enabled/disabled) depending on whether external screens are attached. In this
case, plugging in external DP-MST screens may result in the mode_changed flag
being dropped incorrectly for the integrated panel if its DSC configuration
did not change during precomputation in pre_validate_dsc().
At this point, however, dm_update_crtc_state() has already created new streams
for CRTCs with DSC-independent mode changes. In turn,
amdgpu_dm_commit_streams() will never release the old stream, resulting in a
memory leak. amdgpu_dm_atomic_commit_tail() will never acquire a reference to
the new stream either, which manifests as a use-after-free when the stream gets
disabled later on:
BUG: KASAN: use-after-free in dc_stream_release+0x25/0x90 [amdgpu]
Write of size 4 at addr ffff88813d836524 by task kworker/9:9/29977
Workqueue: events drm_mode_rmfb_work_fn
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0xa0
print_address_description.constprop.0+0x88/0x320
? dc_stream_release+0x25/0x90 [amdgpu]
print_report+0xfc/0x1ff
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x225/0x4e0
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_report+0xe1/0x180
? dc_stream_release+0x25/0x90 [amdgpu]
kasan_check_range+0x125/0x200
dc_stream_release+0x25/0x90 [amdgpu]
dc_state_destruct+0x14d/0x5c0 [amdgpu]
dc_state_release.part.0+0x4e/0x130 [amdgpu]
dm_atomic_destroy_state+0x3f/0x70 [amdgpu]
drm_atomic_state_default_clear+0x8ee/0xf30
? drm_mode_object_put.part.0+0xb1/0x130
__drm_atomic_state_free+0x15c/0x2d0
atomic_remove_fb+0x67e/0x980
Since there is no reliable way of figuring out whether a CRTC has unrelated
mode changes pending at the time of DSC validation, remember the value of the
mode_changed flag from before the point where a CRTC was marked as potentially
affected by a change in DSC configuration. Reset the mode_changed flag to this
earlier value instead in pre_validate_dsc().
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/5004
Fixes: 17ce8a6907f7 ("drm/amd/display: Add dsc pre-validation in atomic check")
Signed-off-by: Yussuf Khalil <dev@pp3345.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cc7c7121ae082b7b82891baa7280f1ff2608f22b)
|
|
Forcibly disable the OD_FAN_CURVE feature when temperature or PWM range is invalid,
otherwise PMFW will reject this configuration on smu v13.0.x
example:
$ sudo cat /sys/bus/pci/devices/<BDF>/gpu_od/fan_ctrl/fan_curve
OD_FAN_CURVE:
0: 0C 0%
1: 0C 0%
2: 0C 0%
3: 0C 0%
4: 0C 0%
OD_RANGE:
FAN_CURVE(hotspot temp): 0C 0C
FAN_CURVE(fan speed): 0% 0%
$ echo "0 50 40" | sudo tee fan_curve
kernel log:
[ 756.442527] amdgpu 0000:03:00.0: amdgpu: Fan curve temp setting(50) must be within [0, 0]!
[ 777.345800] amdgpu 0000:03:00.0: amdgpu: Fan curve temp setting(50) must be within [0, 0]!
Closes: https://github.com/ROCm/amdgpu/issues/208
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Instead of a dynamic allocation, use stack variable and let the caller
pass the maximum ranges that can be held in the buffer.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Rename the enum 'pixel_format' to 'dc_pixel_format' to avoid potential
name conflicts with the pixel_format struct defined in
include/video/pixel_format.h.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Enable user specified gfx clock ranges for smu_15_0_8
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add smu v15_0_8 ip block
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add node power management support for smu_v15_0_8
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add baseboard temperature metrics support via system metrics table for
smu_v15_0_8
v4: Add separate function to fill baseboard temperature, use 16, remove
casting
v5: Optimize to use single switch case (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add gpuboard temperature metrics support via system metrics table for
smu_v15_0_8
v3: Use per sensor attr id (Lijo)
v4: Use s16 for temp, remove cast, use separate function to fill
gpuboard temperature metrics data (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add read sensor support for smu_v15_0_8
v2: Remove gfx voltage support (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add ppt1 support for smu_v15_0_8
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add get_thermal_temperature_range support smu_v15_0_8
v2: Remove sriov check (Lijo)
v3: Restrict to 1VF mode(Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add od_edit_dpm_table support for smu_v15_0_8
v2: Skip Gl2clk/Fclk (Lijo)
v3: sqaush in set_performance_support (Asad)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
add populate_umd_state_clk support for smu 15.0.8
v2: remove gl2clk/socclk/fclk, restrict to only current min/max (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dcn42_init_hw() calls update_bw_bounding_box() when FAMS2 is disabled or
when the dchub reference clock changes. However the existing condition
mixes the callback pointer check with only one side of the || expression:
((!fams2_enable && update_bw_bounding_box) || freq_changed)
This allows the block to be entered through the freq_changed path even
when update_bw_bounding_box() is NULL. The function is then called
unconditionally inside the block, which can lead to a NULL pointer
dereference.
Additionally, the code dereferences dc->clk_mgr->bw_params without
verifying that dc->clk_mgr and bw_params are valid.
Restructure the condition so that the update trigger remains the same
(FAMS2 disabled or dchub ref clock changed), but guard the call with
explicit checks for:
- update_bw_bounding_box callback
- dc->clk_mgr
- dc->clk_mgr->bw_params
Also introduce a helper boolean (dchub_ref_freq_changed) to improve
readability of the clock-change condition.
This fixes Smatch warnings about inconsistent NULL assumptions in
dcn42_init_hw().
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn42/dcn42_hwseq.c:264 dcn42_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 253)
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn42/dcn42_hwseq.c:278 dcn42_init_hw() error: we previously assumed 'dc->res_pool->funcs->update_bw_bounding_box' could be null (see line 274)
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Jerry Zuo <jerry.zuo@amd.com>
Cc: Sun peng Li <sunpeng.li@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dcn32_init_hw() checks dc->clk_mgr before calling init_clocks(), so the
clock manager is not treated as unconditionally present on this path.
However, dcn32_initialize_min_clocks() later dereferences dc->clk_mgr,
bw_params, and clk_mgr callbacks without validating them.
Add the required guards in dcn32_initialize_min_clocks() before
accessing clk_mgr-dependent state, and check callback presence before
calling get_dispclk_from_dentist() and update_clocks().
Also guard the later update_bw_bounding_box() call in the FAMS2-disabled
path since it also dereferences dc->clk_mgr->bw_params.
This keeps clk_mgr handling consistent in the DCN32 HW init flow and
avoids possible NULL pointer dereferences reported by Smatch.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn32/dcn32_hwseq.c:1012 dcn32_init_hw() error: we previously assumed 'dc->clk_mgr' could be null (see line 978)
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Jerry Zuo <jerry.zuo@amd.com>
Cc: Sun peng Li <sunpeng.li@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add emit clock support and fetching other metrics data like temperature,
clock for smu_v15_0_8
v2: Use umc count for hbm stack temperature (Lijo)
v3: Use correct logic for hbm stacks (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
export .set_power_limit & .get_power_limit interface for smu 15.0.8
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
export .get_unique_id interface for smu 15.0.8
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
