| Age | Commit message (Collapse) | Author |
|---|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.1:
UAPI Changes:
amdxdna:
- support per-BO memory-usage queries
docs:
- Improve UAPI documentation
panthor:
- extend timestamp query with flags
Core Changes:
edid:
- provide enum drm_output_color_format; mass-convert drivers
gem-dma:
- use drm_dev_dma_dev() for DMA mappings
- set VM_DONTDUMP on mmap
mipi-dbi:
- drop simple-display; mass-convert drivers
prime:
- use drm_dev_dma_dev() for DMA mappings
ttm:
- improve handling of gfp_retry_mayfail
Driver Changes:
amdgpu:
- use atomic_create_state for private_obj
amdxdna:
- refactor GEM implementation
- fixes
bridge:
- provide clear-and-put helper for reliable cleanup
- analogix_dp: Use DP helpers for link training
- lontium-lt8713sx: Fix 64-bit division and Kconfig
- samsung-dsim: Use clear-and-put
imagination:
- improve power-off sequence
- support context-reset notification from firmware
komeda:
- support Arm China Linlon D6 plus DT bindings
mediatek:
- use drm_dev_dma_dev() for DMA mappings
panel:
- support Himax HX83121A plus DT bindings
- support JuTouch JT070TM041 plus DT bindings
- support Samsung S6E8FC0 plus DT bindings
- himax-hx83102c: support Samsung S6E8FC0 plus DT bindings; support backlight
- ili9806e: support Rocktech RK050HR345-CT106A plus DT bindings
- simple: support Tianma TM050RDH03 plus DT bindings
panthor:
- support various sources for timestamp queries
- fixes
omapdrm:
- use atomic_create_state for private_obj
rcar-du:
- fix suspend/resume wrt VSP interface
- fix leak of device_link
- clean up
sun4i:
- use drm_dev_dma_dev() for DMA mappings
tegra:
- use atomic_create_state for private_obj
xe:
- send 'none' recovery method for XE_WEDGED_MODE_UPON_ANY_HANG_NO_RESET
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260326151812.GA76082@linux.fritz.box
|
|
RZ/G3L SoC is embedded with Mali-G31 GPU system. Add GPU_PM_RT support as
it needs to be assert/deassert the reset during suspend/resume.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://patch.msgid.link/20260320164158.487406-5-biju.das.jz@bp.renesas.com
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
|
|
On RZ/G2L SoCs, the GPU MMU requires a bus_ace clock to operate correctly.
Without it, unbind/bind cycles leave the GPU non-operational, manifesting
as an AS_ACTIVE bit stuck and a soft reset timeout falling back to hard
reset. Add bus_ace_clock as an optional clock, wiring it into init/fini,
and the runtime suspend/resume paths alongside the existing optional
bus_clock.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://patch.msgid.link/20260320164158.487406-4-biju.das.jz@bp.renesas.com
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
|
|
The clk_enable() and clk_disable() APIs already handle NULL clock pointers
gracefully — clk_enable() returns 0 and clk_disable() returns immediately
when passed a NULL or optional clock. The explicit if (pfdev->bus_clock)
guards around these calls in the runtime suspend/resume paths are
therefore unnecessary. Remove them to simplify the code.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://patch.msgid.link/20260320164158.487406-3-biju.das.jz@bp.renesas.com
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Hi Dave and Sima,
Here goes our third, perhaps, final drm-xe-next PR towards 7.1.
In the big things we have:
- THP support in drm_pagemap
- xe_vm_get_property_ioctl
Thanks,
Matt
UAPI Changes:
- Implement xe_vm_get_property_ioctl (Jonathan)
Cross-subsystem Changes:
- Enable THP support in drm_pagemap (Francois, Brost)
Core Changes:
- Improve VF FLR synchronization for Xe VFIO (Piotr)
Driver Changes:
- Fix confusion with locals on context creation (Tomasz, Fixes)
- Add new SVM copy GT stats per size (Francois)
- always keep track of remap prev/next (Auld, Fixes)
- AuxCCS handling and render compression modifiers (Tvrtko)
- Implement recent spec updates to Wa_16025250150 (Roper)
- xe3p_lpg: L2 flush optimization (Tejas)
- vf: Improve getting clean NULL context (Wajdeczko)
- pf: Fix use-after-free in migration restore (Winiarski. Fixes)
- Fix format specifier for printing pointer differences (Nathan Chancellor, Fixes)
- Extend Wa_14026781792 for xe3lpg (Niton)
- xe3p_lpg: Add Wa_16029437861 (Varun)
- Fix spelling mistakes and comment style in ttm_resource.c (Varun)
- Merge drm/drm-next into drm-xe-next (Thomas)
- Fix missing runtime PM reference in ccs_mode_store (Sanjay, Fixes)
- Fix uninitialized new_ts when capturing context timestamp (Umesh)
- Allow reading after disabling OA stream (Ashutosh)
- Page Reclamation Fixes (Brian Nguyen, Fixes)
- Include running dword offset in default_lrc dumps (Roper)
- Assert/Deassert I2C IRQ (Raag)
- Fixup reset, wedge, unload corner cases (Zhanjun, Brost)
- Fail immediately on GuC load error (Daniele)
- Fix kernel-doc for DRM_XE_VM_BIND_FLAG_DECOMPRESS (Niton, Fixes)
- Drop redundant entries for Wa_16021867713 & Wa_14019449301 (Roper, Fixes)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/acS5xmWC3ivPTmyV@gsse-cloud1.jf.intel.com
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-7.1-2026-03-25:
amdgpu:
- DSC fix
- Module parameter parsing fix
- PASID reuse fix
- drm_edid leak fix
- SMU 13.x fixes
- SMU 14.x fix
- Fence fix in amdgpu_amdkfd_submit_ib()
- LVDS fixes
- GPU page fault fix for non-4K pages
- Misc cleanups
- UserQ fixes
- SMU 15.0.8 support
- RAS updates
- Devcoredump fixes
- GFX queue priority fixes
- DPIA fixes
- DCN 4.2 updates
- Add debugfs interface for pcie64 registers
- SMU 15.x fixes
- VCN reset fixes
- Documentation fixes
amdkfd:
- Ordering fix in kfd_ioctl_create_process()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260325175012.4185721-1-alexander.deucher@amd.com
|
|
Fix include guard macros that don't match their respective file names:
- xe_gt_idle_types.h: _XE_GT_IDLE_SYSFS_TYPES_H_ -> _XE_GT_IDLE_TYPES_H_
- xe_guc_exec_queue_types.h: _XE_GUC_ENGINE_TYPES_H_ -> _XE_GUC_EXEC_QUEUE_TYPES_H_
- xe_heci_gsc.h: __XE_HECI_GSC_DEV_H__ -> _XE_HECI_GSC_H_
- xe_hw_engine_class_sysfs.h: _XE_ENGINE_CLASS_SYSFS_H_ -> _XE_HW_ENGINE_CLASS_SYSFS_H_
- xe_late_bind_fw_types.h: _XE_LATE_BIND_TYPES_H_ -> _XE_LATE_BIND_FW_TYPES_H_
- xe_platform_types.h: _XE_PLATFORM_INFO_TYPES_H_ -> _XE_PLATFORM_TYPES_H_
- xe_tile_printk.h: _xe_tile_printk_H_ -> _XE_TILE_PRINTK_H_
These guards appear to be leftovers from file renames or copy-paste
errors. Correcting them to follow the standard convention of matching
the file name prevents potential include guard collisions.
No functional change expected.
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Link: https://patch.msgid.link/20260316160451.1688247-2-shuicheng.lin@intel.com
|
|
The result of cdn_dp_reg_write() is checked everywhere (with the error
being logged by the callers) except one place in cdn_dp_config_video().
Add the missing result check, bailing out early on error...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: 1a0f7ed3abe2 ("drm/rockchip: cdn-dp: add cdn DP support for rk3399")
Signed-off-by: Sergey Shtylyov <s.shtylyov@auroraos.dev>
Cc: stable@vger.kernel.org
Reviewed-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/adf6b313-f7db-4d8f-9000-8c65446ba041@auroraos.dev
|
|
Add missing error check for platform_get_resource() return value to
prevent NULL pointer dereference when memory resource is not available.
Fixes: 718b3bb9c0ab ("drm/rockchip: analogix_dp: Expand device data to support multiple edp display")
Cc: stable@vger.kernel.org
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260209033123.1089370-1-nichen@iscas.ac.cn
|
|
Instead of testing import_attach for imported GEM buffers, invoke
drm_gem_is_imported() to do the test. The test itself does not change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: Heiko Stübner <heiko@sntech.de>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: linux-rockchip@lists.infradead.org
Fixes: b57aa47d39e9 ("drm/gem: Test for imported GEM buffers with helper")
Closes: https://lore.kernel.org/dri-devel/38d09d34.4354.196379aa560.Coremail.andyshrk@163.com/
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260227133113.235940-11-tzimmermann@suse.de
|
|
The bridge gets allocated and initialized implicitly via the
devm_drm_bridge_alloc() helper in dw_dp_bind(). However, this is
preceded by an explicit allocation for the same dw_dp struct, which is
never used anywhere as the return from devm_kzalloc() gets immediately
overwritten by the aforementioned helper.
Get rid of the unnecessary and confusing memory allocation.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260310-drm-rk-fixes-v2-8-645ecfb43f49@collabora.com
|
|
Simplify encoder initialization and cleanup by making use of
drmm_encoder_init(), which takes care of registering
drm_encoder_cleanup() with drmm_add_action().
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260310-drm-rk-fixes-v2-6-645ecfb43f49@collabora.com
|
|
Included header "rockchip_drm_vop.h" is not directly used, drop it.
While at it, ensure #include directives are ordered alphabetically.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260310-drm-rk-fixes-v2-5-645ecfb43f49@collabora.com
|
|
Make the code a bit more compact by getting rid of the superfluous
assignments around PTR_ERR().
While at it, also drop dev assignment in dw_dp_probe().
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260310-drm-rk-fixes-v2-4-645ecfb43f49@collabora.com
|
|
Attempting to access driver data in the platform driver ->remove()
callback may lead to a null pointer dereference since there is no
guaranty that the component ->bind() callback invoking
platform_set_drvdata() was executed.
A common scenario is when Rockchip DRM driver didn't manage to run
component_bind_all() because of an (unrelated) error causing early
return from rockchip_drm_bind().
Drop the unnecessary call to platform_get_drvdata() and, instead,
reference the target device structure via platform_device.
Fixes: d68ba7bac955 ("drm/rockchip: Add RK3588 DPTX output support")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260310-drm-rk-fixes-v2-3-645ecfb43f49@collabora.com
|
|
Driver makes use of drmm_encoder_init() to initialize the encoder and
automatically handle the cleanup by registering drm_encoder_cleanup()
with drmm_add_action().
However, the internal structure containing the encoder part gets
allocated with devm_kzalloc(), which happens while component_bind_all()
is being called from Rockchip DRM driver. The component framework
further ensures it is deallocated as part of releasing all the resources
claimed during bind, which is triggered from component_unbind_all().
When the reference to the DRM device gets eventually dropped via
drm_dev_put() in rockchip_drm_unbind(), drmm_encoder_alloc_release()
attempts to access the now released encoder structure, leading to
use-after-free.
Ensure driver's internal structure is still reachable on encoder cleanup
by switching from a device-managed allocation to a drm-managed one.
Fixes: d68ba7bac955 ("drm/rockchip: Add RK3588 DPTX output support")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260310-drm-rk-fixes-v2-2-645ecfb43f49@collabora.com
|
|
Driver makes use of drmm_encoder_init() to initialize the encoder and
automatically handle the cleanup by registering drm_encoder_cleanup()
with drmm_add_action().
However, the internal structure containing the encoder part gets
allocated with devm_kzalloc(), which happens while component_bind_all()
is being called from Rockchip DRM driver. The component framework
further ensures it is deallocated as part of releasing all the resources
claimed during bind, which is triggered from component_unbind_all().
When the reference to the DRM device gets eventually dropped via
drm_dev_put() in rockchip_drm_unbind(), drmm_encoder_alloc_release()
attempts to access the now released encoder structure, leading to
use-after-free.
Ensure driver's internal structure is still reachable on encoder cleanup
by switching from a device-managed allocation to a drm-managed one.
Fixes: 969325a2597e ("drm/rockchip: inno-hdmi: Convert to drm bridge")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260310-drm-rk-fixes-v2-1-645ecfb43f49@collabora.com
|
|
Async work (e.g., GuC queue teardowns) can call ggtt_node_remove, so the
operation must be performed under the GGTT lock to ensure the GGTT
online check remains stable. GGTT insertion and removal are heavyweight
operations (e.g., queue create/destroy), so the additional serialization
cost is negligible compared to ensuring correctness.
Fixes: 4f3a998a173b ("drm/xe: Open-code GGTT MMIO access protection")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patch.msgid.link/20260326011207.62373-1-matthew.brost@intel.com
|
|
Commit 792d2b9a1259 ("drm: drop mtrr from i915"), added this comment,
drop it since it was carried over from i915.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260326121818.122401-2-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
The DU driver creates device_link instances between the DU and CMMs, but
never deletes them. Fix it by introducing a rcar_du_cmm structure to
group the CMM device and device_link, and deleting the links at cleanup
time.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260323164526.2292491-5-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
Replace manual of_node_put() calls with __free(). This simplifies error
handling code and makes it less bug-prone.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260323164526.2292491-4-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The DU driver stores the CMM devices as pointers to struct
platform_device, and passes them to the API exposed by the CMM driver.
This is similar to how the VSP is handled, except that the VSP uses
struct device pointers. Replace the CMM platform_device pointers with
device pointers for consistency.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260323164526.2292491-3-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
The VSP serves as an interface to memory and a compositor to the DU. It
therefore needs to be suspended after and resumed before the DU, to be
properly stopped and restarted in a controlled fashion driven by the DU
driver. This currently works by chance. Avoid relying on luck by
enforcing the correct suspend/resume ordering with device links.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260323164526.2292491-2-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
calling drm_dev_unplug"
This reverts commit 6bee098b91417654703e17eb5c1822c6dfd0c01d.
Den 2026-03-25 kl. 22:11, skrev Simona Vetter:
> On Wed, Mar 25, 2026 at 10:26:40AM -0700, Guenter Roeck wrote:
>> Hi,
>>
>> On Fri, Mar 13, 2026 at 04:17:27PM +0100, Maarten Lankhorst wrote:
>>> When trying to do a rather aggressive test of igt's "xe_module_load
>>> --r reload" with a full desktop environment and game running I noticed
>>> a few OOPSes when dereferencing freed pointers, related to
>>> framebuffers and property blobs after the compositor exits.
>>>
>>> Solve this by guarding the freeing in drm_file with drm_dev_enter/exit,
>>> and immediately put the references from struct drm_file objects during
>>> drm_dev_unplug().
>>>
>>
>> With this patch in v6.18.20, I get the warning backtraces below.
>> The backtraces are gone with the patch reverted.
>
> Yeah, this needs to be reverted, reasoning below. Maarten, can you please
> take care of that and feed the revert through the usual channels? I don't
> think it's critical enough that we need to fast-track this into drm.git
> directly.
>
> Quoting the patch here again:
>
>> drivers/gpu/drm/drm_file.c | 5 ++++-
>> drivers/gpu/drm/drm_mode_config.c | 9 ++++++---
>> 2 files changed, 10 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/drm_file.c b/drivers/gpu/drm/drm_file.c
>> index ec820686b3021..f52141f842a1f 100644
>> --- a/drivers/gpu/drm/drm_file.c
>> +++ b/drivers/gpu/drm/drm_file.c
>> @@ -233,6 +233,7 @@ static void drm_events_release(struct drm_file *file_priv)
>> void drm_file_free(struct drm_file *file)
>> {
>> struct drm_device *dev;
>> + int idx;
>>
>> if (!file)
>> return;
>> @@ -249,9 +250,11 @@ void drm_file_free(struct drm_file *file)
>>
>> drm_events_release(file);
>>
>> - if (drm_core_check_feature(dev, DRIVER_MODESET)) {
>> + if (drm_core_check_feature(dev, DRIVER_MODESET) &&
>> + drm_dev_enter(dev, &idx)) {
>
> This is misplaced for two reasons:
>
> - Even if we'd want to guarantee that we hold a drm_dev_enter/exit
> reference during framebuffer teardown, we'd need to do this
> _consistently over all callsites. Not ad-hoc in just one place that a
> testcase hits. This also means kerneldoc updates of the relevant hooks
> and at least a bunch of acks from other driver people to document the
> consensus.
>
> - More importantly, this is driver responsibilities in general unless we
> have extremely good reasons to the contrary. Which means this must be
> placed in xe.
>
>> drm_fb_release(file);
>> drm_property_destroy_user_blobs(dev, file);
>> + drm_dev_exit(idx);
>> }
>>
>> if (drm_core_check_feature(dev, DRIVER_SYNCOBJ))
>> diff --git a/drivers/gpu/drm/drm_mode_config.c b/drivers/gpu/drm/drm_mode_config.c
>> index 84ae8a23a3678..e349418978f79 100644
>> --- a/drivers/gpu/drm/drm_mode_config.c
>> +++ b/drivers/gpu/drm/drm_mode_config.c
>> @@ -583,10 +583,13 @@ void drm_mode_config_cleanup(struct drm_device *dev)
>> */
>> WARN_ON(!list_empty(&dev->mode_config.fb_list));
>> list_for_each_entry_safe(fb, fbt, &dev->mode_config.fb_list, head) {
>> - struct drm_printer p = drm_dbg_printer(dev, DRM_UT_KMS, "[leaked fb]");
>> + if (list_empty(&fb->filp_head) || drm_framebuffer_read_refcount(fb) > 1) {
>> + struct drm_printer p = drm_dbg_printer(dev, DRM_UT_KMS, "[leaked fb]");
>
> This is also wrong:
>
> - Firstly, it's a completely independent bug, we do not smash two bugfixes
> into one patch.
>
> - Secondly, it's again a driver bug: drm_mode_cleanup must be called when
> the last drm_device reference disappears (hence the existence of
> drmm_mode_config_init), not when the driver gets unbound. The fact that
> this shows up in a callchain from a devres cleanup means the intel
> driver gets this wrong (like almost everyone else because historically
> we didn't know better).
>
> If we don't follow this rule, then we get races with this code here
> running concurrently with drm_file fb cleanups, which just does not
> work. Review pointed that out, but then shrugged it off with a confused
> explanation:
>
> https://lore.kernel.org/all/e61e64c796ccfb17ae673331a3df4b877bf42d82.camel@linux.intel.com/
>
> Yes this also means a lot of the other drm_device teardown that drivers
> do happens way too early. There is a massive can of worms here of a
> magnitude that most likely is much, much bigger than what you can
> backport to stable kernels. Hotunplug is _hard_.
Back to the drawing board, and fixing it in the intel display driver
instead.
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 6bee098b9141 ("drm: Fix use-after-free on framebuffers and property blobs when calling drm_dev_unplug")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Link: https://patch.msgid.link/20260326082217.39941-2-dev@lankhorst.se
|
|
A typical bridge refcount value is 3 after a bridge chain is formed:
- devm_drm_bridge_alloc() initializes the refcount value to be 1.
- drm_bridge_add() gets an additional reference hence 2.
- drm_bridge_attach() gets the third reference hence 3.
This typical refcount value aligns with allbridges_show()'s behaviour.
However, since encoder_bridges_show() uses
drm_for_each_bridge_in_chain_scoped() to automatically get/put the
bridge reference while iterating, a bogus reference is accidentally
got when showing the wrong typical refcount value as 4 to users via
debugfs. Fix this by caching the refcount value returned from
kref_read() while iterating and explicitly decreasing the cached
refcount value by 1 before showing it to users.
Fixes: bd57048e4576 ("drm/bridge: use drm_for_each_bridge_in_chain_scoped()")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260318-drm-misc-next-2026-03-05-fix-encoder-bridges-refcount-v3-1-147fea581279@nxp.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
The prepare timing specified by the G190EAN01 datasheet should be
between 30 and 50 ms. Considering it might take some time for the
LVDS encoder to enable the signal, we should only wait the min.
required time in the panel driver and not the max. allowed time.
Fixes: 2f7b832fc992 ("drm/panel: simple: Add support for AUO G190EAN01 panel")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260217142528.68613-1-ian.ray@gehealthcare.com
|
|
The HTF065H045 panel based on the HX83102 controller does use DCS
commands for controlling backlight brightness. Make the driver fall back
to DCS when no external backlight has been defined in the device tree,
like many other drivers do.
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260217070121.190108-5-val@packett.cool
|
|
This 720x1600 panel is found in several Motorola/Lenovo smartphones like
the Moto G9 Play (guamp). The initialization sequence is based on the
datasheet. Add it to the existing HX83102 panel driver.
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260217070121.190108-4-val@packett.cool
|
|
Add driver for Samsung S6E8FC0 DSI controller for M1906F9 video mode panel,
found in Xiaomi Mi A3 mobile phone.
Co-developed-by: Kamil Gołda <kamil.golda@protonmail.com>
Signed-off-by: Kamil Gołda <kamil.golda@protonmail.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Yedaya Katsman <yedaya.ka@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260320-panel-patches-v7-2-3eaefc4b3878@gmail.com
|
|
The DSI link must be powered up to let panel driver to talk to the panel
during prepare() callback execution. Set the prepare_prev_first flag to
guarantee this.
Fixes: 9e15123eca79 ("drm/msm/dsi: Stop unconditionally powering up DSI hosts at modeset")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260323-panel-fix-v1-1-9f12b09161e8@oss.qualcomm.com
|
|
Add the Tianma Micro-electronics TM050RDH03 5.0" WVGA TFT LCD panel.
Reuse panel ontat,kd50g21-40nt-a1's panel description as they are
identical.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260227-tianma-tm050rdh03-v1-2-cab78a0d765d@nxp.com
|
|
Add support for the Rocktech RK050HR345-CT106A panel based on the
Ilitek ILI9806E controller using the SPI bus.
The driver is designed to be easily extensible to support other panels
with different initialization sequences and display timings by
providing a specific descriptor structure for each model.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260318073346.18041-5-dario.binacchi@amarulasolutions.com
|
|
Split the driver to support multiple transport buses. The core logic
(power, GPIO, backlight) is moved to a dedicated core module, while
DSI-specific code is restricted to the DSI module.
Introduce DRM_PANEL_ILITEK_ILI9806E_CORE as a hidden Kconfig symbol
selected by the bus-specific configuration.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260318073346.18041-3-dario.binacchi@amarulasolutions.com
|
|
The Ilitek ILI9806E controller can support different transport buses,
such as MIPI-DSI and SPI. The current implementation is specific to
the MIPI-DSI interface.
In preparation for adding SPI support, rename the current Kconfig
symbol and files to be DSI-specific, clarifying the current scope
of the code.
Since DRM_PANEL_ILITEK_ILI9806E is not used in any in-tree defconfig,
the symbol is renamed directly to DRM_PANEL_ILITEK_ILI9806E_DSI without
providing a legacy compatibility alias.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260318073346.18041-2-dario.binacchi@amarulasolutions.com
|
|
Add a driver for panels using the Himax HX83121A Display Driver IC,
including support for the BOE/CSOT PPC357DB1-4, found in HUAWEI
Matebook E Go series (Gaokun2/3).
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260316084040.728106-3-mitltlatltl@gmail.com
|
|
Add JuTouch Technology JT070TM041 7" 1024x600 LVDS panel support.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260325-v7-0-topic-imx8mp-skov-dts-jutouch-7inch-v1-2-10255d236439@pengutronix.de
|
|
When the mmap function was converted from a file op to a GEM object
function in commit f5ca8eb6f9bd ("drm/cma-helper: Implement mmap as GEM
CMA object functions") some VM flags were not lifted from drm_gem_mmap():
- VM_IO
- VM_DONTEXPAND
- VM_DONTDUMP
VM_DONTEXPAND was added back in commit 59f39bfa6553 ("drm/cma-helper:
Set VM_DONTEXPAND for mmap"). VM_IO doesn't make sense since these are
memory buffers, while "IO tells people not to look at these pages
(accesses can have side effects)".
Add back VM_DONTDUMP. This matches the behavior of most other GEM
implementations.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260317040034.617585-1-wenst@chromium.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
|
|
The kernel's `register` macro would clash with nova-core's own version
if it was imported directly, so it was accessed through its `io` module
during the conversion phase.
Now that nova-core's `register` macro doesn't exist anymore, we can
import and use it directly without risk of name collision.
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260325-b4-nova-register-v4-9-bdf172f0f6ca@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
Convert all PFALCON, PFALCON2 and PRISCV registers to use the kernel's
register macro and update the code accordingly.
Because they rely on the same types to implement relative registers,
they need to be updated in lockstep.
nova-core's local register macro is now unused, so remove it.
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260325-b4-nova-register-v4-8-bdf172f0f6ca@nvidia.com
[acourbot@nvidia.com: remove unused import.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
Convert all PDISP registers to use the kernel's register macro and
update the code accordingly.
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260325-b4-nova-register-v4-7-bdf172f0f6ca@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
Convert all FUSE registers to use the kernel's register macro and update
the code accordingly.
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260325-b4-nova-register-v4-6-bdf172f0f6ca@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
Convert all GC6 registers to use the kernel's register macro and update
the code accordingly.
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260325-b4-nova-register-v4-5-bdf172f0f6ca@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
Convert all PFB registers to use the kernel's register macro and update
the code accordingly.
NV_PGSP_QUEUE_HEAD was somehow caught in the PFB section, so move it to
its own section and convert it as well.
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260325-b4-nova-register-v4-4-bdf172f0f6ca@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
Convert all PBUS registers to use the kernel's register macro and update
the code accordingly.
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260325-b4-nova-register-v4-3-bdf172f0f6ca@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
Convert all PMC registers to use the kernel's register macro and update
the code accordingly.
Reviewed-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260325-b4-nova-register-v4-2-bdf172f0f6ca@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
Introduce a powered-up version of our ad-hoc `impl_from_enum_to_u8`
macro that allows the definition of an enum type associated to a
`Bounded` of a given width, and provides the `From` and `TryFrom`
implementations required to use that enum as a register field member.
This allows us to generate the required conversion implementations for
using the kernel register macro and skip some tedious boilerplate.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260325-b4-nova-register-v4-1-bdf172f0f6ca@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
|
|
Dell seems to be changing device ID even within same device model. Due to
this we need to ignore device ID when applying quirk for Dell XPS 14
DA14260. Do this by adding DEVICE_ID_ANY and assign it to Dell XPS 14
DA14260 quirk. Also apply the quirk only for eDP Panel Replay.
Fixes: 45c77d4bf8d4 ("drm/i915/psr: Disable Panel Replay on Dell XPS 14 DA14260 as a quirk")
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patch.msgid.link/20260320080403.1396926-1-jouni.hogander@intel.com
|
|
After setting a local variable, check that local value rather that
checking destination at which the value will be stored later.
This fixes the obvious mistake in error path; without it,
allocation fail would lead to NULL dereference during context
creation.
Fixes: 89340099c6a4 ("drm/xe/lrc: Refactor context init into xe_lrc_ctx_init()")
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Raag Jadav <raag.jadav@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260320145733.1337682-1-tomasz.lis@intel.com
|
|
Breakdown the GT stats for copy to host and copy to device per size (4K,
64K 2M) to make it easier for user space to track memory migrations.
This is helpful to verify allocation alignment is correct when porting
applications to SVM.
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260325160152.1057556-1-francois.dugast@intel.com
|
|
This is an associated type that may be used in order to specify a
data-type to pass to gem objects when constructing them, allowing for
drivers to more easily initialize their private-data for gem objects.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Janne Grunau <j@jananu.net>
Tested-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Link: https://patch.msgid.link/20260316211646.650074-5-lyude@redhat.com
[ Resolve merge conflicts in Tyr. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
