| Age | Commit message (Collapse) | Author |
|---|
|
Try KQ by ring_id first (KCQ and UQ never share a HW slot); fall back
to amdgpu_userq_process_fence_irq() on miss, since KQ EOPs were
misrouted into the userq fence path when enable_mes is true.
Require a strict (me,pipe,queue) match in the gfx case, then userq gfx
EOPs fall through to amdgpu_userq_process_fence_irq().
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 88e589cc811ba907209a426c426c469bcb4bb894)
Cc: stable@vger.kernel.org
|
|
CRIU checkpoint copies the MQD control stack using cp_hqd_cntl_stack_size
from hardware without bounding it to the allocated BO region. If the HW
field is larger than the queue's control stack allocation, memcpy reads
past the BO into adjacent GTT memory and can leak kernel data to userspace.
Store the page-aligned control stack BO size in mqd_manager and clamp
checkpoint copies and reported checkpoint sizes to
min(cp_hqd_cntl_stack_size, mm->ctl_stack_size). Apply the same bound
for multi-XCC v9.4.3 checkpoint layout.
Signed-off-by: Yongqiang Sun <Yongqiang.Sun@amd.com>
Reviewed-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6c2abd0ec09e86c6323010673766f76050e28aa3)
Cc: stable@vger.kernel.org
|
|
amdgpu_pci_remove() calls drm_dev_unplug() before invoking the driver
fini routines. This causes drm_dev_enter() in amdgpu_ttm_fini() to
always return false, so iounmap(aper_base_kaddr) never runs on normal
driver unload, leaving an orphaned entry in the x86 PAT interval tree.
On connected_to_cpu hardware, the aperture is mapped write-back (WB) via
ioremap_cache(). On reload, IP discovery calls memremap(..., MEMREMAP_WC)
over the same range. The WC vs WB conflict causes:
ioremap error for 0x..., requested 0x1, got 0x0
amdgpu: discovery failed: -2
Fix by switching to devres-managed mappings so cleanup is guaranteed
regardless of drm_dev_enter() state:
- connected_to_cpu path: devm_memremap(MEMREMAP_WB). For
IORESOURCE_SYSTEM_RAM ranges this takes the try_ram_remap() shortcut,
returning __va(offset) from the existing kernel direct map. No new
ioremap VA or PAT entry is created, so there is nothing to orphan.
- dGPU path: devm_ioremap_wc() registers iounmap() as a devres action,
guaranteeing cleanup at device_del() time.
Also remove iounmap(aper_base_kaddr) from amdgpu_device_unmap_mmio()
since the mapping is now devres-owned.
v2: Remove redundant x86_64 guard (Lijo)
Fixes: 9d0af8b4def0 ("drm/amdgpu: pre-map device buffer as cached for A+A config")
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d871e99879cb5fd1fa798b006b4888887e63a17a)
Cc: stable@vger.kernel.org
|
|
commit_planes_do_stream_update_sequence
The function has two arrays on the stack to hold temporary dsc_optc_config
and dsc_config objects. The combination blows through common stack frame
warning limits in combination with the other local variables:
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc.c:4070:22: error: stack frame size (1352) exceeds limit
(1280) in 'commit_planes_do_stream_update_sequence' [-Werror,-Wframe-larger-than]
Since neither array is initialized or used outside of the
add_link_update_dsc_config_sequence() function, there is no actual
need to keep each element around.
Replace the arrays with a single instance each to reduce the stack usage
to less than half.
Fixes: 9f49d3cd7e71 ("drm/amd/display: Implement block sequencing infrastructure for modular hardware operations.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Acked-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9e0896fa6f7dbe9ca3dbbd3b593fa91670f4820b)
Cc: stable@vger.kernel.org
|
|
[why]
Some resources that exist in the DCN block are not needed and shouldn't
be used.
[how]
Remove defines from register lists.
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dac8aa629a45e34027444f74d3b86b6f104b024c)
|
|
[why]
The register lists used on DCN42 variants are different. Some reused
codepaths are trying to access registers not used.
[how]
Add DISPCLK_FREQ_CHANGECNTL, HUBPREQ_DEBUG, and HDMISTREAMCLK_CNTL to
the register lists.
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 64142f9d51aff32f4130d916cb8f044a072ad27d)
|
|
To avoid wraparound if the value is 0.
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c0cae35661868af207077a4306bc42c7c972947c)
Cc: stable@vger.kernel.org
|
|
Fix a security vulnerability where malicious VCE command streams
with oversized dimensions (e.g. 65536×65536) cause 32-bit integer
overflow, wrapping the calculated buffer size to 0. This bypasses
validation and allows GPU firmware to perform out-of-bound memory
access.
The fix uses 64-bit arithmetic to detect overflow and rejects
invalid dimensions before they reach the hardware.
V2: remove redundant check
V3: modify max height value
V4: remove size64
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cbe408dba581755ad1279a487ec786d8927d778d)
Cc: stable@vger.kernel.org
|
|
Reuse the parameter length returned by
vcn_v4_0_enc_find_ib_param() instead of rereading it from
the IB.
This avoids a potential TOCTOU issue if the IB contents
change between reads.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: David Rosca <david.rosca@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dbb02b4755f8c1f3773263f2d779872c1c0c073a)
Cc: stable@vger.kernel.org
|
|
When width or height is less than 16, width_in_mb or height_in_mb
becomes 0, leading to fs_in_mb being 0. This causes a division by
zero when calculating num_dpb_buffer in H264 and H264 Perf decode
paths.
Add validation to reject frames with width < 16 or height < 16
before performing any calculations that depend on these values.
V2: Format change - move up all vaiable definitions.
V3: Use warn_once to avoid spam.
Signed-off-by: Boyuan Zhang <boyuan.zhang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3e41d26c70b0a459d041cc19482a226c4b7423cb)
Cc: stable@vger.kernel.org
|
|
When BT.2020 colorimetry is selected, the driver sends information using
VSC SDP but does not set "ignore MSA colorimetry" bit on older GPUs with
DCE-based IPs. This causes certain sinks to prefer colorimetry
information in DP MSA, resulting in terrible color rendering ("dull"
colors) when HDR is enabled.
This commit wires up the MISC1 bit 6 for GPUs with DCE 11.x based IPs to
correctly configure sinks to ignore colorimetry information in MSA,
resolving the color rendering issue.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/4849
Assisted-by: oh-my-pi:GPT-5.5
Signed-off-by: Leorize <leorize+oss@disroot.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 323a09e56c1d549ce47d4f110de77b0051b4a8bf)
Cc: stable@vger.kernel.org
|
|
amdgpu_pm_info displayed power sensor readings with the wrong fractional unit.
It treated the low byte of the raw sensor value as the decimal part of watts,
while that field represents milliwatts in the decoded value. As a result,
debugfs could report misleading SoC power when the remainder was not already
a two-digit centiwatt value.
Example with query = 0x00000354:
raw field value
---------------------
query >> 8 3 W
query & 0xff 84 mW
decoded power 3084 mW
output value
---------------------
before 3.84 W
after 3.08 W
Fixes: f0b8f65b4825 ("drm/amd/amdgpu: fix the GPU power print error in pm info")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 01992b121fb652c753d37e0c1427a2d1a557d2b1)
Cc: stable@vger.kernel.org
|
|
SCPM owns power feature control when enabled.
Make pp_features read-only during sysfs setup by clearing its write bits
and store callback.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6a5786e191fdce36c5db170e5209cf609e8f0087)
Cc: stable@vger.kernel.org
|
|
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c4f230b51cf2d3e7e8b1c800331f3dbed2a9e3f5)
Cc: stable@vger.kernel.org
|
|
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 9723a8bed3aa251a26bee4583bac9d8fb064dd44)
Cc: stable@vger.kernel.org
|
|
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c17a508a7d652da3728f8bbc481bfffe96d65a87)
Cc: stable@vger.kernel.org
|
|
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ae658afc7f47f6147371ec42cc6b1a793dfdb5af)
Cc: stable@vger.kernel.org
|
|
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8d144a0eb09537055841af48c9e7c2d4cd48e84d)
Cc: stable@vger.kernel.org
|
|
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fa4f86a148271e325e95287630a3a15a9cd35fdc)
Cc: stable@vger.kernel.org
|
|
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e4d99e04b2e9b13b97d3b17804c735f62689db23)
Cc: stable@vger.kernel.org
|
|
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f952076f76d62f783e8ba4995a7c400d39354ccf)
Cc: stable@vger.kernel.org
|
|
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit daa62107452d2451787c4248ca38fa2d1a0cbefd)
Cc: stable@vger.kernel.org
|
|
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ac6f00beb658239bced4aaed9efbb04a35348d48)
Cc: stable@vger.kernel.org
|
|
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5676593d08998d7a6d9e2d51d6b54b3820e3755c)
Cc: stable@vger.kernel.org
|
|
There's no need to crash the kernel for these cases.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b71604f8685b0eba07866f4e8dc30f93e1931054)
Cc: stable@vger.kernel.org
|
|
There's no need to crash the kernel for this case.
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4d7c25208ca612b754f3bf39e9f16e725b828891)
Cc: stable@vger.kernel.org
|
|
For SOC24 ASICs (RDNA4 / Navi 4x dGPUs) re-enabling PM features fails if an
S3 suspend got aborted, the same issue already handled for SOC21 and SOC15:
commit df3c7dc5c58b ("drm/amdgpu: Reset dGPU if suspend got aborted")
commit 38e8ca3e4b6d ("amdgpu/soc15: enable asic reset for dGPU in case of suspend abort")
The aborted resume fails with:
amdgpu: SMU: No response msg_reg: 6 resp_reg: 0
amdgpu: Failed to enable requested dpm features!
amdgpu: resume of IP block <smu> failed -62
Apply the same workaround for soc24: detect the aborted-suspend state at
resume via the sign-of-life register and reset the device before re-init.
This is a workaround till a proper solution is finalized.
Fixes: 98b912c50e44 ("drm/amdgpu: Add soc24 common ip block (v2)")
Signed-off-by: Jakob Linke <jakob@linke.cx>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fed5bdbfe1d4a19a26c70f7fc58017dc88be1c18)
Cc: stable@vger.kernel.org
|
|
Unconditionally whitelisting OA registers is a security violation. Set
RING_FORCE_TO_NONPRIV_DENY bit in OA nonpriv slots, so that OA registers
don't get whitelisted by default after probe, gt reset, resume and engine
reset.
Fixes: 828a8eaf37c3 ("drm/xe/oa: Add MMIO trigger support")
Cc: stable@vger.kernel.org # v6.12+
Suggested-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20260615224227.34880-2-ashutosh.dixit@intel.com
(cherry picked from commit 90511bdcfda97211c01f1d945d4ea616578d8fca)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
There already has a check for exec_queue_suspended(q) that returns early
if suspended.
Fixes: 65280af331aa ("drm/xe/multi_queue: skip submit when primary queue is suspended")
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260617012516.19930-1-yaolu@kylinos.cn
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 173202a5a3a9e6590194ce0f5880d1529a71ade7)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
The page-table walk framework may pass a NULL *child pointer for
unpopulated entries. xe_pt_zap_ptes_entry() called container_of(*child)
before checking for NULL, then dereferenced the result, causing a crash.
Move the container_of() call after a NULL guard, so the function returns
early instead of proceeding with an invalid pointer. XE_WARN_ON is kept
to help root cause the issue, but we now bail instead of crashing the
driver.
v2: Comment that triggering XE_WARN_ON is unexpected behavior (Matt Brost)
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20260616081756.286918-1-francois.dugast@intel.com
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
(cherry picked from commit b9297d19d9df5d4b6c994648570c5dcd1cac68ff)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
A kernel job that exhausts its recovery attempts called
xe_device_declare_wedged() directly from guc_exec_queue_timedout_job(),
while the handler still owned the timed-out job and the queue scheduler
(sched = &q->guc->sched, stopped at the top of the handler).
In the default wedged mode (XE_WEDGED_MODE_UPON_CRITICAL_ERROR),
xe_device_declare_wedged() takes the destructive path in
xe_guc_submit_wedge(): guc_submit_reset_prepare(), xe_guc_submit_stop()
- which calls guc_exec_queue_stop() on every queue, including this one -
softreset and pause-abort. That tears submission down, signals the
in-flight fences and restarts the schedulers. This is the correct
behaviour when the wedge originates outside the TDR, but not when the
TDR itself triggers it: every queue should be torn down except the one
the TDR is currently operating on, which it still owns.
Control then returned to the handler, which kept using the now stale job
and scheduler:
xe_sched_job_set_error(job, err);
drm_sched_for_each_pending_job(tmp_job, &sched->base, NULL)
xe_sched_job_set_error(to_xe_sched_job(tmp_job), -ECANCELED);
drm_sched_for_each_pending_job() warns because the scheduler is no
longer stopped (WARN_ON(!drm_sched_is_stopped())) and the iteration then
dereferences a freed job, faulting on the slab poison:
Oops: general protection fault ... 0x6b6b6b6b6b6b6c3b
RIP: guc_exec_queue_timedout_job+...
Defer the wedge until the handler has finished operating on the queue,
right before returning DRM_GPU_SCHED_STAT_NO_HANG, so the teardown no
longer races with this handler's use of @q.
Fixes: 770031ec2312 ("drm/xe: fix job timeout recovery for unstarted jobs and kernel queues")
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Assisted-by: GitHub-Copilot:claude-opus-4.8
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260612162414.287971-2-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit a889e9b06bfdb375fc88b3b2a4b143f621f930c6)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
drm_dp_mst_topology_queue_probe()
A hotplug or link-loss event can tear down the MST topology
(setting mgr->mst_state = false and mgr->mst_primary = NULL) concurrently
with a caller invoking drm_dp_mst_topology_queue_probe(). Since the check
is already performed under mgr->lock, the condition is not a programming
error but a valid race -- the topology was valid when the caller decided
to call this function, but was torn down before the lock was acquired.
Replace the drm_WARN_ON() with a graceful early return. This eliminates
spurious kernel warnings and the resulting compositor crashes observed
when connecting/disconnecting DP MST monitors, while keeping the correct
behavior of doing nothing when MST is not active. A drm_dbg_mst() trace
is added so the skipped probe remains observable under MST debug logging.
The existing WARN_ON(mgr->mst_primary) in drm_dp_mst_topology_mgr_set_mst()
already catches the case where the topology is initialized twice, so no
diagnostic coverage is lost.
Fixes: dbaeef363ea5 ("drm/dp_mst: Add a helper to queue a topology probe")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Jonas Emilsson <jonas.emilsson@gmail.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/all/20260503034533.1023686-1-jonas.emilsson@gmail.com
Acked-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260622140532.526722-1-luciano.coelho@intel.com
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
While the panel_type from LFP Data Block is range checked, panel_type2
is not. Add a few helpers for range checking, and use them to not only
check panel_type2, but also improve clarity and correctness in the panel
type selection.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
v2:
- Fix commit message typo (Michał)
- Add is_panel_type_pnp() (Ville)
Reported-by: Martin Hodo <martin.hodo@intel.com>
Fixes: 6434cf630086 ("drm/i915/bios: calculate panel type as per child device index in VBT")
Cc: stable@vger.kernel.org # v6.0+
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Ville Syrjälä <ville.syrjala@intel.com>
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com> # v1
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260626140155.1389655-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit c9ebe5d2f25729d6cfbbb1235d640bf67f9275df)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Ensure the EDID provided min/max vfreq are valid. Most scenarios are
already covered (by coincidence) through the checks in
intel_vrr_is_capable() and intel_vrr_is_in_range(), but be more explicit
about it. At worst, a zero min_vfreq could lead to a division by zero in
intel_vrr_compute_vmax().
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
Reported-by: Martin Hodo <martin.hodo@intel.com>
Fixes: 117cd09ba528 ("drm/i915/display/dp: Compute VRR state in atomic_check")
Cc: stable@vger.kernel.org # v5.12+
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260625131040.1051272-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 1765cf59f517b02f3b0591fe5120930d08bddeb6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The autogenerated panthor_request_xx_irq() helpers unmask Mali
interrupts before we're sure we'll have a handler registered. For
non-shared IRQ lines, that's fine, but for shared ones, it might cause
an interrupt flood if the HW block raises an interrupt for any reason.
We could reworking the calls in panthor_request_xx_irq(), but it's just
simpler to let the caller decide when they are ready to handle interrupts
and call panthor_pwr_irq_resume() themselves. While at it, rework the
prototype to let users call panthor_pwr_irq_enable_events() explicitly
instead of passing an initial mask to panthor_request_pwr_irq().
Fixes: 5fe909cae118 ("drm/panthor: Add the device logical block")
Reported-by: Shashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260623-panthor-signal-from-irq-v3-0-2ece396f8ee0@collabora.com?part=3
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Karunika Choo <karunika.choo@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-11-b67ed973fea6@collabora.com
|
|
group_bind_locked() can fail if the MMU block is stuck. This is normally
a reset situation, but by the time we reset the GPU, we might have
tried to resume a group that's not resident, which will probably trip
out the FW. So let's avoid that by bailing out when group_bind_locked()
returns an error. We don't even try to start more groups because the
GPU will be reset anyway.
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Reported-by: sashiko-bot@kernel.org
Closes: https://sashiko.dev/#/patchset/20260623-panthor-signal-from-irq-v3-0-2ece396f8ee0@collabora.com?part=7
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-10-b67ed973fea6@collabora.com
|
|
A group ref is tied to the pending tiler_oom_work, so we need to release
it if the cancel was effective.
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Reported-by: sashiko-bot@kernel.org
Closes: https://sashiko.dev/#/patchset/20260623-panthor-signal-from-irq-v3-0-2ece396f8ee0@collabora.com?part=7
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-9-b67ed973fea6@collabora.com
|
|
panthor_fw_unplug() is only called if we at least managed to initialize
the IRQ, so it's safe to drop the "is IRQ initialized" check.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-8-b67ed973fea6@collabora.com
|
|
We can't call panthor_pwr_irq_suspend() if the device is suspended,
or this leads to a hang when the IOMEM region is accessed while the
clks are disabled. Do what other sub-components do and conditionally
call panthor_pwr_irq_suspend() if we know the PWR regbank block is
accessible.
Fixes: c27787f2b77f ("drm/panthor: Introduce panthor_pwr API and power control framework")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-7-b67ed973fea6@collabora.com
|
|
We schedule immediate ticks when we need to process events on CSGs,
but those immediate ticks don't change the resched_target because we
want the other groups to stay scheduled for the remaining of the GPU
timeslot they were given. Make sure these immediate ticks don't get
overruled by a sched_queue_delayed_work() that would delay the tick
execution.
Fixes: 99820b4b7e50 ("drm/panthor: Make sure we resume the tick when new jobs are submitted")
Reported-by: sashiko-bot@kernel.org
Closes: https://sashiko.dev/#/patchset/20260625-panthor-signal-from-irq-v4-0-3d2908912afa@collabora.com?part=9
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Karunika Choo <karunika.choo@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-6-b67ed973fea6@collabora.com
|
|
In theory, our hardirq handler can be called while the device (and
thus the panthor_irq) is suspended, because the IRQ line is shared.
In practice though, in all the designs we've seen, the line is only
shared within the GPU, and because sub-component suspend state is
consistent (all-suspended or all-resumed), we shouldn't end up with
an interrupt triggered while we're suspended.
Fix the problem anyway, if nothing else, for our sanity.
Fixes: 0b2d86670a84 ("drm/panthor: Rework panthor_irq::suspended into panthor_irq::state")
Reported-by: sashiko-bot@kernel.org
Closes: https://sashiko.dev/#/patchset/20260625-panthor-signal-from-irq-v4-0-3d2908912afa@collabora.com?part=1
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-5-b67ed973fea6@collabora.com
|
|
If heaps is an ERR_PTR(), panthor_heap_pool_put() will deref an invalid
pointer. Make sure we set it to NULL in that case.
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Reported-by: sashiko-bot@kernel.org
Closes: https://sashiko.dev/#/patchset/20260625-panthor-signal-from-irq-v5-0-8836a74e0ef9@collabora.com?part=2
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-4-b67ed973fea6@collabora.com
|
|
The reset work will sub-component reset helpers, which might not be
ready if the reset happens during initialization, leading to NULL
pointer dereferences or worse.
Avoid that by keeping the reset work disabled while we're initializing
those sub-components.
Fixes: 5fe909cae118 ("drm/panthor: Add the device logical block")
Reported-by: sashiko-bot@kernel.org
Closes: https://sashiko.dev/#/patchset/20260625-panthor-signal-from-irq-v5-0-8836a74e0ef9@collabora.com?part=4
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-2-b67ed973fea6@collabora.com
|
|
Since dma_fence objects can be shared with other subsystems, they may be
accessed from hardirq context in those drivers, and we have to take
that into account by also using the IRQ-safe variant when acquiring
the lock.
While at it, switch to the guard model.
Fixes: de8548813824 ("drm/panthor: Add the scheduler logical block")
Reported-by: sashiko-bot@kernel.org
Closes: https://sashiko.dev/#/patchset/20260625-panthor-signal-from-irq-v5-0-8836a74e0ef9@collabora.com?part=11
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260625-panthor-misc-fixes-v1-1-b67ed973fea6@collabora.com
|
|
komeda_dev_resume() calls clk_prepare_enable() without checking the
return value. If the clock fails to enable, the function returns 0
(success) while IRQs are enabled and IOMMU is connected on potentially
unclocked hardware, causing undefined behavior on resume.
Propagate the error from clk_prepare_enable() and fix all call sites
in komeda_drv.c that previously ignored the return value of
komeda_dev_resume():
- komeda_platform_probe(): if resume fails, jump to err_destroy_mdev
(skipping the suspend call, since the clock was never enabled)
- komeda_pm_resume(): propagate the error and skip
drm_mode_config_helper_resume() on failure
This issue was found by code review without access to Komeda hardware.
Signed-off-by: Gustavo Kenji Mendonça Kaneko <kaneko.dev@pm.me>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260609130828.1066038-1-kaneko.dev@pm.me
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
malidp_runtime_pm_resume() calls clk_prepare_enable() three times
without checking the return value. If any clock fails to enable, the
driver silently proceeds with unclocked hardware, leading to undefined
behavior.
Convert both the resume and suspend paths to use the clk_bulk API:
clk_bulk_prepare_enable() in resume checks the return value and rolls
back any successfully enabled clocks on failure;
clk_bulk_disable_unprepare() in suspend keeps the two paths symmetric.
This issue was found by code review without access to Mali DP hardware.
Signed-off-by: Gustavo Kenji Mendonça Kaneko <kaneko.dev@pm.me>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260609130812.1065699-1-kaneko.dev@pm.me
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
|
|
virtio_get_edid_block() validates the read offset only against the
device-supplied resp->size field, never against the fixed-size resp->edid
array. The EDID block index is driven by the device-supplied extension
count, so a malicious virtio-gpu backend can advertise a large size
together with a high block count and read far past the array into adjacent
kernel memory, which is then surfaced in the parsed EDID (an out-of-bounds
read / info leak).
Also reject any read whose end exceeds the size of the edid array.
Conforming EDID responses stay within the array and are unaffected.
Fixes: b4b01b4995fb ("drm/virtio: add edid support")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260620-b4-disp-22bba7bf-v1-1-b95924cee742@proton.me
|
|
The HDCP 2.2 specification requires the seq_num_v to be monotonically
increasing, and repeated seq_num_v needs to be treated as an integrity
failure. Make it so.
For the first message, seq_num_v must be zero, and is already
checked. We can only check for less-than-or-equal for the subsequent
messages, where hdcp2_encrypted is true.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
Reported-by: Martin Hodo <martin.hodo@intel.com>
Fixes: d849178e2c9e ("drm/i915: Implement HDCP2.2 repeater authentication")
Cc: stable@vger.kernel.org # v5.2+
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260625104407.1025614-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 58a224375c81179b52558c53d8857b93196d2687)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The data->streams[] overflow check is done after the buffer overflow has
already happened. Move the overflow check before the write.
Side note, emitting a warning splat with a backtrace might be overkill
here, but prefer not changing the behaviour other than not doing the
overrun.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
Reported-by: Martin Hodo <martin.hodo@intel.com>
Fixes: e03187e12cae ("drm/i915/hdcp: MST streams support in hdcp port_data")
Cc: stable@vger.kernel.org # v5.12+
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260625170304.1104723-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 9284ab3b6e776c315883ac2611283d263c9460fd)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Avoid returning &node->base when node is NULL due to OOM
during GFP_ATOMIC allocation.
Discovered using AI-assisted static analysis confirmed by
Intel Product Security.
Reported-by: Martin Hodo <martin.hodo@intel.com>
Fixes: bfaae47db3c0 ("drm/i915: make lockdep slightly happier about execbuf.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v5.13+
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/20260624090940.74840-1-joonas.lahtinen@linux.intel.com
(cherry picked from commit 6029bc064f0b1bac184203a50fbaaf070fa18832)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
