| Age | Commit message (Collapse) | Author |
|---|
|
If drm_gpusvm_migrate_to_devmem() succeeds, if a cpu access happens to the
range the bo may be freed before xe_bo_unlock(), causing a UAF.
Since the reference is transferred, use xe_svm_devmem_release() to
release the reference on drm_gpusvm_migrate_to_devmem() failure,
and hold a local reference to protect the UAF.
Fixes: 2f118c949160 ("drm/xe: Add SVM VRAM migration")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250326080551.40201-3-thomas.hellstrom@linux.intel.com
|
|
Don't rely on CONFIG_DRM_GPUSVM because other drivers may enable it
causing us to compile in SVM support unintentionally.
Also take the opportunity to leave more code out of compilation if
!CONFIG_DRM_XE_GPUSVM and !CONFIG_DRM_XE_DEVMEM_MIRROR
v3:
- Fixes for compilation errors on 32-bit. This changes the Kconfig
logic a bit.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250326080551.40201-2-thomas.hellstrom@linux.intel.com
|
|
The Forcewake timeout issue has been observed on Gen 12.0 and above.
To address this, disable Render Power-Gating (RPG) during live self-tests
for these generations. The temporary workaround 'drm/i915/mtl: do not
enable render power-gating on MTL' disables RPG globally, which is
unnecessary since the issues were only seen during self-tests.
v2: take runtime pm wakeref
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/9413
Fixes: 25e7976db86b ("drm/i915/mtl: do not enable render power-gating on MTL")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Sk Anirban <sk.anirban@intel.com>
Reviewed-by: Karthik Poosa <karthik.poosa@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250310152821.2931678-1-sk.anirban@intel.com
|
|
GC12 only has 1 mec.
Fixes: 52cb80c12e8a ("drm/amdgpu: Add gfx v12_0 ip block support (v6)")
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
GC11 only has 1 mec.
Fixes: 3d879e81f0f9 ("drm/amdgpu: add init support for GFX11 (v2)")
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Add new gpu_metrics_v1_8 to acquire below host limit counters
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fetch VBIOS from shadow ROM when available before trying other methods
like EFI method.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: 9c081c11c621 ("drm/amdgpu: Reorder to read EFI exported ROM first")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4066
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Update smu metrics table to vesrion 0x10 for smu_v13_0_6
v2: Host metrics support removal moved to separate patch (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Firmware algorithm changed and the values in this version
are not accurate thereby remove host limit metric support
for smu_v13_0_6, smu_v13_0_12 & smu_v13_0_14
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
GC v9_4_2 uses a new versioning scheme for CP firmware, making
the warning ("CP firmware version too old, please update!") irrelevant.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
This looks unnecessary and actually extremely harmful since using kmap()
is not possible while inside the ring reset.
Remove all the extra mapping and unmapping of the MQDs.
v2: also fix debugfs
v3: fix coding style typo
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
this temporarily reverts
commit 6ec04e38b2f6 ("drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA")
it cause a regression.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
We should only increase the deferred errors in UMC block.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Update ta ra block to keep sync with RAS TA.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Compute partition DPX is possible in NPS2 mode. Update the compatible
modes for DPX.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
In the case of parsing GFX deferred error from SMU corrected error
channel, the error count should be set to 1 instead of parsing from
MISC0 register, which is 0.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
The `vblank_config.offdelay` field follows the same semantics as the
`drm_vblank_offdelay` parameter. Setting it to 0 will never disable
vblank.
[How]
Set `offdelay` to a positive number.
Fixes: e45b6716de4b ("drm/amd/display: use a more lax vblank enable policy for DCN35+")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[Why]
When link training fails, the phy clock will be disabled. However, in
enable_streams, it is assumed that link training succeeded and the
mux selects the phy clock, causing a hang when a register write is made.
[How]
When enable_stream is hit, check if link training failed. If it did, fall
back to the ref clock to avoid a hang and keep the system in a recoverable
state.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Brendan Tam <Brendan.Tam@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
[why]
this dscclk use DCN defined per DPM level will cause a DCFCLK increase.
needs to follow up.
This reverts commit 15b959534a39530a21d378190557cc8d1eab7b09
Reviewed-by: Yihan Zhu <yihan.zhu@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Depending on when the HW latching event (vupdate) of double-buffered
registers happen relative to the PSR SDP (signals panel psr enter/exit)
deadline, and how bad the Panel clock has drifted since the last ALPM
off event, there can be up to 3 frames of delay between sending the PSR
exit cmd to DMUB fw, and when the panel starts displaying live frames.
This can manifest as micro-stuttering when userspace commit patterns
cause rapid toggling of the DRM vblank counter, since PSR enter/exit is
hooked up to DRM vblank disable/enable respectively.
In the ideal world, the panel should present the live frame immediately
on PSR exit cmd. But due to HW design and PSR limitations, immediate
exit can only happen by chance, when:
1. PSR exit cmd is ack'd by FW before HW latching (vupdate) event, and
2. Panel's SDP deadline -- determined by it's PSR Start Delay in DPCD
71h -- is after the vupdate event. The PSR exit SDP can then be sent
immediately after HW latches. Otherwise, we have to wait 1 frame. And
3. There is negligible drift between the panel's clock and source clock.
Otherwise, there can be up to 1 frame of drift.
Note that this delay is not expected with Panel Replay.
[How]
Since PSR power savings can be quite substantial, and there are a lot of
systems in the wild with PSR panels, It'll be nice to have a middle
ground that balances user experience with power savings.
A simple way to achieve this is by extending the vblank offdelay, such
that additional PSR exit delays will be less perceivable.
We can set:
20/100 * offdelay_ms = 3_frames_ms
=> offdelay_ms = 5 * 3_frames_ms
This ensures that `3_frames_ms` will only be experienced as a 20% delay
on top how long the panel has been static, and thus make the delay
less perceivable.
If this ends up being too high of a percentage, it can be dropped
further in a future change.
Fixes: 537ef0f88897 ("drm/amd/display: use new vblank enable policy for DCN35+")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
If compiled without SI or CIK support but amdgpu tries to load it
will run into failures with uninitialized callbacks.
Show a nicer message in this case and fail probe instead.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4050
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Hook up zero RPM enable for 9070 and 9070 XT based on RDNA3
(smu 13.0.0 and 13.0.7) code.
Tested on 9070 XT Hellhound
Signed-off-by: Tomasz Pakuła <tomasz.pakula.oficjalny@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.12.x
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c52dcf49195d ("drm/amd/pp: Avoid divide-by-zero in fan_ctrl_set_fan_speed_rpm")
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c52dcf49195d ("drm/amd/pp: Avoid divide-by-zero in fan_ctrl_set_fan_speed_rpm")
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 031db09017da ("drm/amd/powerplay/vega20: enable fan RPM and pwm settings V2")
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b64625a303de ("drm/amd/pm: correct the address of Arcturus fan related registers")
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
The user can set any speed value.
If speed is greater than UINT_MAX/8, division by zero is possible.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c05d1c401572 ("drm/amd/swsmu: add aldebaran smu13 ip support (v3)")
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
We need to save the reservation object pointer associated with the
imported dmabuf in the newly created GEM object to allow
drm_gem_plane_helper_prepare_fb() to extract the exclusive fence
from it and attach it to the plane state during prepare phase.
This is needed to ensure that drm_atomic_helper_wait_for_fences()
correctly waits for the relevant fences (move, etc) associated with
the reservation object, thereby implementing proper synchronization.
Otherwise, artifacts or slight flickering can be seen when apps
are dragged across the screen when running Gnome (Wayland). This
problem is mostly seen with dGPUs in the case where the FBs are
allocated in VRAM but need to be migrated to System RAM as they
are shared with virtio-gpu.
Fixes: ca77f27a2665 ("drm/virtio: Import prime buffers from other devices as guest blobs")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Gurchetan Singh <gurchetansingh@chromium.org>
Cc: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
[dmitry.osipenko@collabora.com: Moved assignment before object_init()]
Link: https://patchwork.freedesktop.org/patch/msgid/20250325201021.1315080-1-vivek.kasireddy@intel.com
|
|
Use refcount_t helper for vmap_use_count to make refcounting consistent
with pages_use_count and pages_pin_count that use refcount_t. This also
makes vmapping to benefit from the refcount_t's overflow checks.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.d>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250322212608.40511-11-dmitry.osipenko@collabora.com
|
|
The vmapped pages shall be pinned in memory and previously get/put_pages()
were implicitly hard-pinning/unpinning the pages. This will no longer be
the case with addition of memory shrinker because pages_use_count > 0 won't
determine anymore whether pages are hard-pinned (they will be soft-pinned),
while the new pages_pin_count will do the hard-pinning. Switch the
vmap/vunmap() to use pin/unpin() functions in a preparation of addition
of the memory shrinker support to drm-shmem.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.d>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250322212608.40511-10-dmitry.osipenko@collabora.com
|
|
Use atomic refcount_t helper for pages_use_count to optimize pin/unpin
functions by skipping reservation locking while GEM's pin refcount > 1.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.d>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250322212608.40511-9-dmitry.osipenko@collabora.com
|
|
Add separate pages_pin_count for tracking of whether drm-shmem pages are
moveable or not. With the addition of memory shrinker support to drm-shmem,
the pages_use_count will no longer determine whether pages are hard-pinned
in memory, but whether pages exist and are soft-pinned (and could be swapped
out). The pages_pin_count > 1 will hard-pin pages in memory.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.d>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250322212608.40511-8-dmitry.osipenko@collabora.com
|
|
Everything that uses the mapped buffer should be agnostic to is_iomem.
The only reason for the is_iomem test is that we're setting shmem->vaddr
to the returned map->vaddr. Now that the shmem->vaddr code is gone, remove
the obsoleted is_iomem test to clean up the code.
Acked-by: Maxime Ripard <mripard@kernel.org>
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.d>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250322212608.40511-7-dmitry.osipenko@collabora.com
|
|
Add locked and remove unlocked postfixes from drm-shmem function names,
making names consistent with the drm/gem core code.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.d>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250322212608.40511-6-dmitry.osipenko@collabora.com
|
|
Make all drm-shmem exported symbols GPL to make them consistent with
the rest of drm-shmem symbols.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.d>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250322212608.40511-5-dmitry.osipenko@collabora.com
|
|
Add _locked postfix to drm_gem functions that have unlocked counterpart
functions to make GEM functions naming more consistent and intuitive in
regards to the locking requirements.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.d>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250322212608.40511-3-dmitry.osipenko@collabora.com
|
|
Make drm/gem API function names consistent by having locked function
use the _locked postfix in the name, while the unlocked variants don't
use the _unlocked postfix. Rename drm_gem_v/unmap() function names to
make them consistent with the rest of the API functions.
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.d>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250322212608.40511-2-dmitry.osipenko@collabora.com
|
|
Add fault injection for xe_oa_alloc_regs to allow it to fail while
executing xe_oa_add_config_ioctl().
This need to be added as it cannot be reached by injecting error through
IOCTL arguments.
Signed-off-by: Nakshtra Goyal <nakshtra.goyal@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20250227102339.2859726-1-nakshtra.goyal@intel.com
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
|
|
WARNING: unmet direct dependencies detected for FB_IOMEM_HELPERS
Depends on [n]: HAS_IOMEM [=y] && FB_CORE [=n]
Selected by [m]:
- DRM_XE_DISPLAY [=y] && HAS_IOMEM [=y] && DRM [=m] && DRM_XE [=m] && DRM_XE [=m]=m [=m] && HAS_IOPORT [=y]
DRM_XE_DISPLAY requires FB_IOMEM_HELPERS, but the dependency FB_CORE is
missing, selecting FB_IOMEM_HELPERS if DRM_FBDEV_EMULATION is set as
other drm drivers.
Fixes: 44e694958b95 ("drm/xe/display: Implement display support")
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250323114103.1960511-1-yuehaibing@huawei.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 689582882802cd64986c1eb584c9f5184d67f0cf)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Commit d40f275d96e8 ("drm/xe: Move survivability entirely to xe_pci")
tried to follow the logic: initialize everything needed and if
everything succeeds, set the flag that it's enabled. While it fixed some
corner cases of those calls failing, it was wrong for setting the flag
after the call to xe_heci_gsc_init(): that function does a different
initialization for survivability mode.
Fix that and add comments about this being done on purpose.
Suggested-by: Riana Tauro <riana.tauro@intel.com>
Fixes: d40f275d96e8 ("drm/xe: Move survivability entirely to xe_pci")
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250314-fix-survivability-v5-2-fdb3559ea965@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 14efa739ca70514e8b923a02b5bcb42511dd1ee8)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Commit d40f275d96e8 ("drm/xe: Move survivability entirely to xe_pci")
moved the survivability handling to be done entirely in the xe_pci
layer. However there are some issues with that approach:
1) Survivability mode needs at least the mmio initialized, otherwise it
can't really read a register to decide if it should enter that state
2) SR-IOV mode should be initialized, otherwise it's not possible to
check if it's VF
Besides, as pointed by Riana the check for
xe_survivability_mode_enable() was wrong in xe_pci_probe() since it's
not a bool return.
Fix that by moving the initialization to be entirely in the xe_device
layer, with the correct dependencies handled: only after mmio and sriov
initialization, and not triggering it on error from
wait_for_lmem_ready(). This restores the trigger behavior before that
commit. The xe_pci layer now only checks for "is it enabled?",
like it's doing in xe_pci_suspend()/xe_pci_remove(), etc.
Cc: Riana Tauro <riana.tauro@intel.com>
Fixes: d40f275d96e8 ("drm/xe: Move survivability entirely to xe_pci")
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250314-fix-survivability-v5-1-fdb3559ea965@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 86b5e0dbba07438de91dd81095464c6c4aa7a372)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
The WA requires KMD to disable DOP clock gating during a semaphore
wait and also ensure that idle delay for every CS is lower than the
idle wait time in the PWRCTX_MAXCNT register. Default values for these
registers already comply with this restriction.
v2: Store timestamp_base in gt info and other comments (Daniele)
v3: Skip WA check for VF
v4: Review comments (Matt Roper)
v5: Cleanup the clock functions and use reg_field_get (Matt Roper)
v6: Fix checkpatch issue
v7: Fix CI issue
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250320175123.3026754-1-vinay.belgaumkar@intel.com
(cherry picked from commit 7c53ff050ba88bb37eed3e17f2bb8ec592d83302)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Starting from commit 18778b5fdd01 ("drm/xe: Eliminate usage of
TIMESTAMP_OVERRIDE") we access the CTC_MODE register only to warn
if it has undocumented value. There is no point in doing that on
the VF driver. While here, move this check to a helper function.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250311114042.1954-2-michal.wajdeczko@intel.com
(cherry picked from commit fce3fb7b914bcd19341de8d8eff8bef371c2cddf)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
On ILK-IVB only PCH outputs use shared dplls. Move the relevant
intel_disable_shared_dpll() into ilk_pch_post_disable() to make
that clear (and if we extend the dpll mgr to cover all plls we need
different enable/disable points anyway for the PCH vs. CPU eDP cases).
The intel_enable_shared_dpll() counterpart was already in
ilk_pch_enable() anyway, so this is the more symmetric place for the
disable as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250310183528.3203-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Currently we loop over all joined pipes and enable/disable the
shared dplls for each. We don't really have to do that since
all joined pipes will be using the same dpll. So let's just do
the enable/disable once for the whole set of joined pipes.
We can still keep tracking the dpll active set as pipes as long
as we remember to flip the bits for all the joined pipes on one go.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250310183528.3203-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add ALSA jack detection to the vc4-hdmi audio driver so userspace knows
when to add/remove HDMI audio devices.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: David Turner <david.turner@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250317-vc4_hotplug-v4-3-2af625629186@raspberrypi.com
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
drm_atomic_helper_connector_hdmi_hotplug() must be called
regardless of the connection status, otherwise the HDMI audio
disconnect event won't be notified.
Fixes: 2ea9ec5d2c20 ("drm/vc4: hdmi: use drm_atomic_helper_connector_hdmi_hotplug()")
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: David Turner <david.turner@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250317-vc4_hotplug-v4-2-2af625629186@raspberrypi.com
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
Update the comment on drm_atomic_helper_connector_hdmi_hotplug() to
clarify that it must be called for all status updates.
Signed-off-by: David Turner <david.turner@raspberrypi.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250317-vc4_hotplug-v4-1-2af625629186@raspberrypi.com
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
|
|
Free the memory used to hold the results of firmware image processing
when the module is unloaded.
Fix the related issue of the same memory being leaked if processing
of the firmware image fails during module load.
Ensure all firmware GEM objects are destroyed if firmware image
processing fails.
Fixes memory leaks on powervr module unload detected by Kmemleak:
unreferenced object 0xffff000042e20000 (size 94208):
comm "modprobe", pid 470, jiffies 4295277154
hex dump (first 32 bytes):
02 ae 7f ed bf 45 84 00 3c 5b 1f ed 9f 45 45 05 .....E..<[...EE.
d5 4f 5d 14 6c 00 3d 23 30 d0 3a 4a 66 0e 48 c8 .O].l.=#0.:Jf.H.
backtrace (crc dd329dec):
kmemleak_alloc+0x30/0x40
___kmalloc_large_node+0x140/0x188
__kmalloc_large_node_noprof+0x2c/0x13c
__kmalloc_noprof+0x48/0x4c0
pvr_fw_init+0xaa4/0x1f50 [powervr]
unreferenced object 0xffff000042d20000 (size 20480):
comm "modprobe", pid 470, jiffies 4295277154
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 09 00 00 00 0b 00 00 00 ................
00 00 00 00 00 00 00 00 07 00 00 00 08 00 00 00 ................
backtrace (crc 395b02e3):
kmemleak_alloc+0x30/0x40
___kmalloc_large_node+0x140/0x188
__kmalloc_large_node_noprof+0x2c/0x13c
__kmalloc_noprof+0x48/0x4c0
pvr_fw_init+0xb0c/0x1f50 [powervr]
Cc: stable@vger.kernel.org
Fixes: cc1aeedb98ad ("drm/imagination: Implement firmware infrastructure and META FW support")
Signed-off-by: Brendan King <brendan.king@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://lore.kernel.org/r/20250318-ddkopsrc-1339-firmware-related-memory-leak-on-module-unload-v1-1-155337c57bb4@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
|
