| Age | Commit message (Collapse) | Author |
|---|
|
This fixes read /sys/class/drm/cardN/device/devcoredump/data
return empty content sometimes.
amdgpu_devcoredump_format() leaves struct drm_print_iterator's
.start field uninitialized on the stack before passing it to
drm_coredump_printer(). __drm_puts_coredump() compares the running
.offset against .start to decide whether to skip or copy each
chunk:
if (iterator->offset < iterator->start) {
if (iterator->offset + len <= iterator->start) {
iterator->offset += len;
return;
}
...
}
Fixes: 4bbba79a7f1d ("drm/amdgpu: move devcoredump generation to a worker")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Qiang Yu <Qiang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cd6397b7af8262a380e188dc32e9de11ff897ed2)
|
|
amdgpu_amdkfd_gpuvm_free_memory_of_gpu() unpinned DOORBELL and MMIO
remap BOs (which are pinned at allocation time) before checking whether
the BO is still mapped to the GPU. When the BO is still mapped, the
function returns -EBUSY and leaves the BO alive, but it has already
been unpinned. The BO is then unpinned again when it is finally freed
during process teardown, triggering a ttm_bo_unpin() underflow warning:
WARNING: CPU: 18 PID: 15066 at ttm/ttm_bo.c:650 amdttm_bo_unpin+0x6d/0x80 [amdttm]
Workqueue: kfd_process_wq kfd_process_wq_release [amdgpu]
RIP: 0010:amdttm_bo_unpin+0x6d/0x80 [amdttm]
Call Trace:
amdgpu_bo_unpin+0x1a/0x90 [amdgpu]
amdgpu_amdkfd_gpuvm_unpin_bo+0x31/0xb0 [amdgpu]
amdgpu_amdkfd_gpuvm_free_memory_of_gpu+0x3bf/0x460 [amdgpu]
kfd_process_free_outstanding_kfd_bos+0xd4/0x170 [amdgpu]
kfd_process_wq_release+0x109/0x1b0 [amdgpu]
process_one_work+0x1e2/0x3b0
worker_thread+0x50/0x3a0
kthread+0xdd/0x100
ret_from_fork+0x29/0x50
Move the unpin after the mapped_to_gpu_memory check so it only happens
once we are committed to freeing the BO.
Fixes: d25e35bc26c3 ("drm/amdgpu: Pin MMIO/DOORBELL BO's in GTT domain")
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 927c5b2defb9b09856444d94bebfd056a002bd75)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are a few added drivers, but mostly the normal maintenance to
drivers for firmware, memory controller and other soc specific
hardware:
- The NXP QuickEngine gets modern MSI support, which allows some
cleanups to the GICv3 irqchip chip driver
- A new SoC specific driver for the Renesas R-Car MFIS unit is added,
encapsulating support for the on-chip mailbox and hwspinlock
implementations that are not easily separated into individual
drivers
- The Qualcomm SoC drivers add support for additional SoC
implementations, and flexibility around power management for the
serial-engine driver as well as probing the LLCC driver using
custom hardware descriptions inside of the device itself.
- Added support for the Samsung thermal management unit
- A cleanup to the Tegra 'PMC' driver interfaces to remove legacy
APIs and allow multiple PMC instances everywhere.
- Updates to the TI SCI and KNAS drivers to improve suspend/resume
support.
- Minor driver changes for mediatek, xilinx, allwinner, aspeed,
tegra, broadcom, amd, microchip and starfive specific drivers
- Memory controller updates for Tegra and Renesas for additional SoC
types and other improvements.
- Firmware driver updates for Arm FF-A, SMCCC and SCMI interfaces, to
update driver probing, object lifetimes and address minor bugs"
* tag 'soc-drivers-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
Revert "firmware: zynqmp: Add dynamic CSU register discovery and sysfs interface"
Revert "Documentation: ABI: add sysfs interface for ZynqMP CSU registers"
memory: tegra234: drop dead NULL check in tegra234_mc_icc_aggregate()
memory: tegra264: drop redundant tegra264_mc_icc_aggregate()
memory: tegra186-emc: stop borrowing MC aggregate hook for EMC
soc: aspeed: cleanup dead default for ASPEED_SOCINFO
firmware: tegra: bpmp: Add support for multi-socket platforms
firmware: tegra: bpmp: Propagate debugfs errors
soc/tegra: pmc: Add Tegra238 support
soc/tegra: pmc: Restrict power-off handler to Nexus 7
soc/tegra: pmc: Populate powergate debugfs only when needed
soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
soc/tegra: pmc: Remove unused legacy functions
soc/tegra: pmc: Create PMC context dynamically
firmware: samsung: acpm: remove compile-testing stubs
firmware: samsung: acpm: Add devm_acpm_get_by_phandle helper
firmware: samsung: acpm: Add TMU protocol support
firmware: samsung: acpm: Make acpm_ops const and access via pointer
firmware: samsung: acpm: Drop redundant _ops suffix in acpm_ops members
firmware: samsung: acpm: Annotate rx_data->cmd with __counted_by_ptr
...
|
|
Pull workqueue updates from Tejun Heo:
- Continued progress toward making alloc_workqueue() unbound by
default: more callers converted to WQ_PERCPU / system_percpu_wq /
system_dfl_wq, and new warnings for queues that use neither WQ_PERCPU
nor WQ_UNBOUND or the legacy system_wq / system_unbound_wq.
- Misc: drop the now-trivial apply_wqattrs_lock()/unlock() wrappers,
forbid the TEST_WORKQUEUE benchmark from being built-in, and fix a
spurious pointer level in the worker debug-dump path.
* tag 'wq-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
drm/bridge: anx7625: Add WQ_PERCPU add to alloc_workqueue
wifi: ath6kl: fix invalid workqueue flags in ath6kl_usb_create()
btrfs: Drop WQ_PERCPU from ordered_flags in btrfs_init_workqueues()
workqueue: Add warnings and ensure one among WQ_PERCPU or WQ_UNBOUND is present
workqueue: Add warnings and fallback if system_{unbound}_wq is used
workqueue: drop spurious '*' from print_worker_info() fn declaration
workqueue: forbid TEST_WORKQUEUE from being built-in
workqueue: drop apply_wqattrs_lock()/unlock() wrappers
umh: replace use of system_unbound_wq with system_dfl_wq
rapidio: rio: add WQ_PERCPU to alloc_workqueue users
media: ddbridge: add WQ_PERCPU to alloc_workqueue users
platform: cznic: turris-omnia-mcu: replace use of system_wq with system_percpu_wq
media: synopsys: hdmirx: replace use of system_unbound_wq with system_dfl_wq
virt: acrn: Add WQ_PERCPU to alloc_workqueue users
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- xe: add initial CRI platform support
- amdgpu: initial HDMI 2.1 FRL support
- rust: add some new type concepts for device lifetimes
- scheduler: moves to a fair algorithm and lots of cleanups
But it's mostly the usual mountain of changes across the board.
core:
- add docbook for DRM_IOCTL_SYNCOBJ_EVENTFD
- change signature of drm_connector_attach_hdr_output_metadata_property
- dedup counter and timestamp retrieval in vblank code
- parse AMD VSDB v3 in CTA extension blocks
- add P230, Y7, XYYY2101010, T430, XVUY210101010 formats
- don't call drop master on file close if not master
- use drm_printf_indent in atomic / bridge
- fix 32b format descriptions
- docs: fix toctree
- hdmi: add common TMDS character rates
- fix drm_syncobj_find_fence leak
rust:
- introduce Higher-Ranked lifetime types
- replace drvdata with scoped registration data
- add GPUVM immediate mode abstraction for rust GPU drivers
- introduce DeviceContext type state for drm::Device
bridge:
- clarify drm_bridge_get/put
- create drm_get_bridge_by_endpoint and use it
- analogix_dp: add panel probing
- ite-it6211 - use drm audio hdmi helpers
buddy:
- add lockdep annotations
dp:
- add PR and VRR updates
- mst: fix buffer overflows
- add Adaptive Sync SDP decoding support
- fix OOB reads in dp-mst
ttm:
- bump fpfn/lpfn to 64-bit
scheduler:
- change default to fair scheduler
- map runqueue 1:1 with scheduler
dma-buf:
- port selftests to kunit
- convert dma-buf system/heap allocators to module
- add separate DMABUF_HEAPS_SYSTEM_CC_SHARED Kconfig
udmabuf:
- revert hugetlb support
- fix error with CONFIG_DMA_API_DEBUG
dma-fence:
- fix tracepoints lifetime
- remove unused signal on any support
ras:
- add clear error counter netlink command to drm ras
gpusvm:
- reject VMAs with VM_IO or VM_PFNMAP when creating SVM ranges
- use IOVA allocations
pagemap:
- use IOVA allocations
panels:
- update to use ref counts
- add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1
- add support for waveshare panels
- CMN N116BCN-EA1, CMN N140HCA-EEK, IVO M140NWFQ R5,
- IVO, R140NWFW R0, BOE NT140*, BOE NV133FHM-N4F,
- AUO B140*, AUO B133HAN06.6 and AUO B116XTN02.3 eDP panels
- Surface Pro 12 Panel
xe:
- add CRI PCI-IDs
- debugfs add multi-lrc info
- engine init cleanup
- PF fair scheduling auto provisioning
- system controller support for CRI/Xe3p
- PXP state machine fixes
- Reset/wedge/unload corner case fixes
- Wedge path memory allocation fixes
- PAT type cleanups
- Reject unsafe PAT for CPU cached memory
- OA improvements for CRI device memory
- kernel doc syntax in xe headers
- xe_drm.h documentation fixes
- include guard cleanups
- VF CCS memory pool
- i915/xe step unification
- Xe3p GT tuning fixes
- forcewake cleanup in GT and GuC
- admin-only PF mode
- enable hwmon energy attributes for CRI
- enable GT_MI_USER_INTERRUPT
- refactor emit functions
- oa workarounds
- multi_queue: allow QUEUE_TIMESTAMP register
- convert stolen memory to ttm range manager
- use xe2 style blitter as a feature flag
- make drm_driver const
- add/use IRQ page to HW engine definition
- fix oops when display disabled
i915:
- enable PIPEDMC_ERROR interrupt
- more common display code refactoring
- restructure DP/HDMI sink format handling
- eliminate FB usage from lowlevel pinning code
- panel replay bw optimization
- integrate sharpness filter into the scaler
- new fb_pin abstraction for xe/i915 fb transparent handling
- skip inactive MST connectors on HDCP
- start switching to display specific registers
- use polling when irq unavailable
- Adaptive-sync SDP prep
amdgpu:
- use drm_display_info for AMD VSDB data
- Initial HDMI 2.1 FRL support
- Initial DCN 4.2.1 support
- GART fixes for non-4k pages
- GC 11.5.6/SDMA 6.4.0/and other new IPs
- GFX9/DCE6/Hawaii/SDMA4/GART/Userq fixes
- Finish support for using multiple SDMA queues for TTM operations
- SWSMU updates
- GC 12.1 updates
- SMU 15.0.8 updates
- DCN 4.2 updates
- DC type conversion fixes
- Enable DC power module
- Replay/PSR updates
- SMU 13.x updates
- Compute queue quantum MQD updates
- ASPM fix
- Align VKMS with common implementation
- DC analog support fixes
- UVD 3 fixes
- TCC harvesting fixes for SI
- GC 11 APU module reload fix
- NBIO 6.3.2 support
- IH 7.1 updates
- DC cursor fixes
- VCN/JPEG user fence fixes
- DC support for connectors without DDC
- Prefer ROM BAR for default VGA device
- DC bandwidth fixes
- Add PTL support for profiler
- Introduce dc_plane_cm and migrate surface update color path
- Add FRL registers for HDMI 2.1
- Restructure VM state machine
- Auxless ALPM support
- GEM_OP locking/warning fixes
- switch to system_dfl_wq
amdkfd:
- GPUVM TLB flush fix
- Hotplug fix
- Boundary check fixes
- SVM fixes
- CRIU fixes
- add profiler API
- MES 12.1 updates
msm:
- core:
- fix shrinker documentation
- IFPC enabled for gen8
- PERFCNTR_CONFIG ioctl support
- GPU:
- reworked UBWC handling
- a810 support
- MDSS:
- add support for Milos platform
- reworked UBWC handling
- DisplayPort:
- reworked HPD handling as prep for MST
- DPU:
- Milos platform support
- reworked UBWC handling
- DSI:
- Milos platform support
nova:
- Hopper/Blackwell enablement (GH100/GB100/GB202)
- FSP support
- 32-bit firmware support
- HAL functions
- refactor GSP boot/unload
- GA100 support
- VBIOS hardening/refactoring
- Adopt higher order lifetime types
tyr:
- define register blocks
- add shmem backed GEM objects
- adopt higher order lifetime types
- move clock cleanup into Drop
radeon:
- Hawaii SMU fixes
- CS parser fix
- use struct drm_edid instead of edid
amdxdna:
- export per-client BO memory via fdinfo
- AIE4 device support
- support medium/lower power modes
- expandable device heap support
- revert read-only user-pointer BO mappings
ivpu:
- support frequency limiting
panthor:
- enable GEM shrinker support
- add eviction and reclaim info to fdinfo
v3d:
- enable runtime PM
mgag200:
- support XRGB1555 + C8
ast:
- support XRGB1555 + C8
- use constants for lots of registers
- fix register handling
imagination:
- fence handling refactoring
nouveau:
- fix sched double call
- expose VBIOS on GSP-RM systems
- add GA100 support
virtio:
- add VIRTIO_GPU_F_BLOB_ALIGNMENT flag
- add deferred mapping support
gud:
- add RCade Display Adapter
hibmc:
- fix no connectors usage
mediatek:
- hdmi: convert error handling
- simplify mtk_crtc allocation
exynos:
- move fbdev emulation to drm client buffers
- use drm format helpers for geometry/size
- adopt core DMA tracking
- fix framebuffer offset handling
renesas:
- add RZ/T2H SOC support
versilicon:
- add cursor plane support
tegra:
- use drm client for framebuffer"
* tag 'drm-next-2026-06-17' of https://gitlab.freedesktop.org/drm/kernel: (1731 commits)
dma-buf: move system_cc_shared heap under separate Kconfig
accel/amdxdna: Clear sva pointer after unbind
agp/amd64: Fix broken error propagation in agp_amd64_probe()
accel/amdxdna: Require carveout when PASID and force_iova are disabled
drm/amdkfd: always resume_all after suspend_all
drm/amdgpu/gfx: move fault and EOP IRQ get/put to hw_init/hw_fini
drm/amd/display: Consult MCCS FreeSync cap only if requested & supported
drm/amd/pm: Use strscpy in profile mode parsing
drm/amdkfd: Fix infinite loop parsing CRAT with zero subtype length
drm/amdkfd: fix sysfs topology prop length on buffer truncation
drm/amdgpu: drop retry loop in amdgpu_hmm_range_get_pages
drm/amd/pm: bound OD parameter parsing to stack array size
drm/amd/pm: Stop pp_od_clk_voltage emit at PAGE_SIZE
drm/amdkfd: Unwind debug trap enable on copy_to_user failure
drm/amdgpu: validate the mes firmware version for gfx12.1
drm/amdgpu: validate the mes firmware version for gfx12
drm/amdgpu: compare MES firmware version ucode for gfx11
drm/amdkfd: Add bounds check for AMDKFD_IOC_WAIT_EVENTS
drm/amdgpu: restart the CS if some parts of the VM are still invalidated
drm/amd/display: use unsigned types for local pipe and REG_GET counters
...
|
|
Current implementation of generate_reclaim_entry() overlooks some
differences between the different page implementations: address masking
and compact 64K page handling.
Address masking of each leaf varies depending on the leaf entry size.
generate_reclaim_entry() is using XE_PTE_ADDR_MASK [51:12] for all leaf
entries. For 2MB PTEs, bit 12 (PAT) is part of the flags so the old mask
corrupts the physical address extraction.
64K pages can be represented as PS64 and a compact PT, which the latter
was not handled. Compact pages aren't walked by the unbind walker, so we
separately walk through the compact PT to ensure none of the leaf 64K
PTEs are dropped. Previously, compact PT were causing an abort since it
was considered covered and not descended into.
v2:
- Update 64K entry/unbind walker for 64K compact PT handling. (Matthew)
- Rework calculations of reclamation and address mask size.
- Add new func abstracting the error handling before generating the
reclaim entry.
v3:
- Report finer addr granularity in abort debug print for compact.
(Zongyao)
- Add comments for ADDR_MASK usage. (Zongyao)
- Drop existing phys_addr asserts, the new XE_PAGE_ADDR_MASK clears
bits checked, so redundant asserts. (Sashiko)
- WARN_ON to verify compact pt and edge pt won't be possible.
Fixes: b912138df299 ("drm/xe: Create page reclaim list on unbind")
Assisted-by: Sashiko-Review:gemini-3.1-pro-preview
Cc: stable@vger.kernel.org
Cc: Matthew Auld <matthew.auld@intel.com>
Suggested-by: Zongyao Bai <zongyao.bai@intel.com>
Signed-off-by: Brian Nguyen <brian3.nguyen@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Zongyao Bai <zongyao.bai@intel.com>
Link: https://patch.msgid.link/20260605224257.2194194-2-brian3.nguyen@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 669252801a4aa4098fbc5dd9dd0bd93f0625abd7)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
The size calculation for the steered register extarray uses only the
geometry DSS mask (g_dss_mask) to determine the number of entries to
allocate:
total = bitmap_weight(gt->fuse_topo.g_dss_mask, ...) * steer_reg_num;
However, the filling loop uses for_each_dss_steering(), which iterates
over for_each_dss(), defined as the union of g_dss_mask and c_dss_mask
(geometry + compute DSS). On platforms with compute-only DSS bits, the
loop writes past the allocated buffer, corrupting adjacent slab objects.
This manifests as list_del corruption and SLUB redzone overwrites during
drm_managed_release on device unbind, since the overflow corrupts the
drmres list_head of neighboring allocations.
Fix by computing the allocation size using the union of both DSS masks,
matching the iteration pattern of for_each_dss_steering().
--
v2:
- use bitmap_weighted_or() (Zhanjun)
Fixes: b170d696c1e2 ("drm/xe/guc: Add XE_LP steered register lists")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/8049
Cc: Zhanjun Dong <zhanjun.dong@intel.com>
Cc: stable@vger.kernel.org
Assisted-by: GitHub-Copilot:claude-opus-4.6
Reviewed-by: Zhanjun Dong <zhanjun.dong@intel.com>
Link: https://patch.msgid.link/20260612070401.543305-2-tejas.upadhyay@intel.com
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
(cherry picked from commit 0a78a44f4901aa6c9263e66be7fce02282f1109f)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
Set the TTM device beneficial_order to 9 (2M), which is the sweet
spot for Xe when attempting reclaim on system memory BOs, as it matches
the large GPU page size. This ensures reclaim is attempted at the most
effective order for the driver.
This fixes an issue where an order-10 (4M) allocation cannot be found
despite an abundance of memory. The 4M allocation triggers reclaim,
unnecessarily evicting the working set and hurting performance. Since
the TTM infrastructure was introduced recently, we are tagging the TTM
patch as the Fixes target, even though this resolves an Xe-side problem.
Fixes: 7e9c548d3709 ("drm/ttm: Allow drivers to specify maximum beneficial TTM pool size")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20260611235844.3725147-1-matthew.brost@intel.com
(cherry picked from commit 0d81db90d364cb3d733410829118759f28957c5a)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
When building with 'make M=drivers/gpu/drm/xe modules', kbuild invokes
scripts/Makefile.build with obj=., causing $(obj) to expand to '.'.
Make normalizes './xe_gen_wa_oob' to 'xe_gen_wa_oob' when constructing
the $^ automatic variable (target name normalization), so the recipe
command becomes just 'xe_gen_wa_oob ...' without any path prefix, and
the shell cannot find the tool.
Fix by replacing $^ with explicit $(obj)/xe_gen_wa_oob and
$(src)/<rules-file> references in both wa_oob recipe commands.
In recipe strings, make does not apply target name normalization, so
$(obj)/xe_gen_wa_oob correctly expands to './xe_gen_wa_oob' and the
shell can execute it. This matches the pattern already used by other
DRM drivers (e.g. radeon's mkregtable).
Fixes: f037e0b78e6d ("drm/xe: add xe_device_wa infrastructure")
Cc: Matt Atwood <matthew.s.atwood@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-xe@lists.freedesktop.org
Assisted-by: GitHub_Copilot:claude-sonnet-4.6
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260604074501.172129-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit 3a11a63cc16660d514ff584e7551589655337e87)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
A job that GuC never scheduled (never started) indicates a GuC
scheduling failure; previously such jobs were silently errored out
instead of triggering a GT reset to recover. Trigger a GT reset and
resubmit them, but only when the queue was not already killed or banned:
an unstarted job on an already banned queue is the ban working as
intended and must neither clear the ban nor kick off a reset, otherwise
a banned userspace queue could be resurrected and spam GT resets.
Kernel queues are always recovered this way and wedge the device once
recovery attempts are exhausted, since kernel work must not silently
fail. A started job that times out on a userspace VM bind queue stays
banned rather than being reset and retried.
The queue is banned early in the timeout handler to signal the G2H
scheduling-done handler so it wakes the disable-scheduling waiter;
without it the waiter sleeps the full 5s timeout. When a reset is
warranted the ban is cleared before rearming so that
guc_exec_queue_start() can resubmit jobs after the GT reset - a
still-banned queue would block resubmission and cause an infinite TDR
loop. The already-banned case is gated out before this point via
skip_timeout_check, so it is unaffected.
v2: (Himal) Do it for any queue type, not just kernel/migration
v3: - (Sashiko and Sanjay): don't clear the ban / GT reset for already
killed/banned queues on unstarted-job timeout
- Update commit message
- (Matt) Add Fixes tag
Fixes: fe05cee4d953 ("drm/xe: Don't short circuit TDR on jobs not started")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Assisted-by: GitHub-Copilot:claude-sonnet-4.6
Assisted-by: GitHub-Copilot:claude-opus-4.8
Tested-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Reviewed-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patch.msgid.link/20260610152548.404575-3-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit b1107d085e7e8ed15ba6f80c102528a9c8a6cb0e)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
xe_range_fence_insert() acquires a reference on fence via
dma_fence_get() and stores it in rfence->fence. It then calls
dma_fence_add_callback() and handles two cases: when the callback
is successfully registered (err == 0) the fence is transferred to
the tree for later cleanup; when the fence is already signaled
(err == -ENOENT) it manually drops the extra reference with
dma_fence_put(fence).
However, dma_fence_add_callback() can fail with other errors
(e.g. -EINVAL) and in that case the code falls through to the free:
label without releasing the acquired reference, leaking it.
Fix the leak by adding an else branch that calls dma_fence_put()
before jumping to free: for any error other than -ENOENT.
Fixes: 845f64bdbfc9 ("drm/xe: Introduce a range-fence utility")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260610172705.3450560-1-matthew.brost@intel.com
(cherry picked from commit 98c4a4201290823c2c5c7ba21692bd9a64b61021)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
Context-based TLB invalidation currently selects only scheduling-active
exec queues via q->ops->active(). During rebind flows, queues may be
suspended (or transitioning through resume) while still owning valid
translations, causing them to be skipped from invalidation and leading
to missed TLB invalidations on LR rebinds.
The underlying issue is a TOCTOU: q->guc->state bits are flipped lock-free
from enable_scheduling(), disable_scheduling{,_deregister}(), the
suspend/resume sched-msg handlers, handle_sched_done(), and
guc_exec_queue_stop(); nothing in send_tlb_inval_ctx_ppgtt() serializes
against them, so any state-based predicate can race.
Include all the registered queues so that TLB invalidations are not
missed. This is race-free because list membership on vm->exec_queues.list
is stable under vm->exec_queues.lock held by the caller. The performance
impact is expected to be minimal and harmless. If it does turn out to be
a concern, we can come back with a race-safe solution to ignore certain
queues.
Fixes: 6cdaa5346d6f ("drm/xe: Add context-based invalidation to GuC TLB invalidation backend")
Assisted-by: Claude:claude-opus-4.6
Suggested-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Signed-off-by: Tangudu Tilak Tirumalesh <tilak.tirumalesh.tangudu@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260608162745.338725-2-tilak.tirumalesh.tangudu@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
(cherry picked from commit aa625e1e9f0710e424fe4f0e3f032807df81b5b0)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
Hardware errors should be logged with HW_ERR prefix. Make them
consistent with existing logs.
Fixes: 01aab7e1c9d4 ("drm/xe/xe_hw_error: Add support for PVC SoC errors")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://patch.msgid.link/20260602044919.702209-5-raag.jadav@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit ad60a618c49fef07d1860bfb1091140d29f5eddb)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
cleanup_node_param() is not registered for previous node in case of counter
allocation failure, which results in stale memory of previous node that
isn't cleaned up on unwind. Add per node cleanup action which guarantees
cleanup on unwind and also simplifies the cleanup logic.
Fixes: b40db12b542f ("drm/xe/xe_drm_ras: Add support for XE DRM RAS")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://patch.msgid.link/20260602044919.702209-4-raag.jadav@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 67fc5543d8274b2fcbef87734fad0469358f4478)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
cleanup_node_param() is not registered for previous node in case of counter
allocation failure, which results in stale memory of previous node that
isn't cleaned up on unwind. Fix this using drm managed allocation, which is
guaranteed to be cleaned up on unwind.
Fixes: b40db12b542f ("drm/xe/xe_drm_ras: Add support for XE DRM RAS")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://patch.msgid.link/20260602044919.702209-3-raag.jadav@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 58d77c77ea0c5cb2b755ebe23e973c8272acd896)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
Return early in submit path when the multi-queue primary exec
queue is suspended to avoid submitting while suspended.
v2: Remove idle_skip_suspend fix as that feature is being
reverted here https://patchwork.freedesktop.org/series/167262/
Fixes: bc5775c59258 ("drm/xe/multi_queue: Add GuC interface for multi queue support")
Cc: stable@vger.kernel.org # v7.0+
Assisted-by: GitHub-Copilot:claude-sonnet-4.6
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patch.msgid.link/20260603233946.863663-2-niranjana.vishwanathapura@intel.com
(cherry picked from commit b7fb55cc3364ca128cfff9d50649ffd4327cd01e)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
In the schedule-disable done path for suspend, we
signal the suspend fence before clearing pending_disable.
That wakeup can let suspend_wait complete and resume be queued
immediately. The resume path may then reach enable_scheduling()
while pending_disable is still set and hit the
!exec_queue_pending_disable(q) assertion.
Fix this by clearing pending_disable before signaling
the suspend fence, so any resumed transition observes a
consistent state.
Fixes: 87651f31ae4e ("drm/xe/guc_submit: fix race around suspend_pending")
Cc: stable@vger.kernel.org # v7.0+
Signed-off-by: Tangudu Tilak Tirumalesh <tilak.tirumalesh.tangudu@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260603065217.3131066-3-tilak.tirumalesh.tangudu@intel.com
(cherry picked from commit 4b1ae138b0e103d753773956a84eebc2edbf62c4)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
This reverts commit 8533051ce92015e9cc6f75e0d52119b9d91610b6.
The idle-skip optimization bypasses GuC suspend, so the GPU may not
perform the context switch that flushes TLB entries for invalidated
userptr VMAs. In LR/preempt-fence VM mode, this can lead to missed TLB
invalidation and page faults during userptr invalidation tests.
Restore unconditional schedule toggling on suspend so the context-switch
TLB flush is always performed.
This optimization will be reintroduced with a fix that does not skip
suspend in LR/preempt-fence VM mode.
Fixes: 8533051ce920 ("drm/xe: Skip exec queue schedule toggle if queue is idle during suspend")
Cc: stable@vger.kernel.org # v7.0+
Suggested-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Signed-off-by: Tangudu Tilak Tirumalesh <tilak.tirumalesh.tangudu@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260603065217.3131066-2-tilak.tirumalesh.tangudu@intel.com
(cherry picked from commit 6a1e7934d9a6cf46aecae00a99c2603d1295e170)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
This reverts commit 4e88de313ff4d1c67b644b1f39f9fb4089711b71.
The early GuC FW definition meant for our CI branch was accidentally
merged to the drm-xe-next branch instead. This GuC FW will never be
released to linux-firmware, so we do not want the definition to be
available in the mainline Linux codebase.
Fixes: 4e88de313ff4 ("drm/xe/nvls: Define GuC firmware for NVL-S")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Julia Filipchuk <julia.filipchuk@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: stable@vger.kernel.org # v7.0+
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260529193558.185436-11-daniele.ceraolospurio@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 65b8e0ac86e48cfc9128c04dfc53ea3395d030dd)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
Enabling PPS after a display port's PLL is enabled leads to PLL / DDI
BUF timeouts during system resuming after a long (> 45 mins) suspended
state, at least on some ARL and MTL laptops, either all or some of them
also containing an Nvidia GPU. Enabling PPS first and then the PLL fixes
the problem for all the reporters.
A similar issue is seen when enabling an external DP output on PHY B
(vs. PHY A in the above eDP cases), where this change will not have any
effect (since no PPS is used in that case). There isn't any direct
connection between PPS and PLL, so the fix for eDP works by some
side-effect only. However Bspec does seem to require enabling PPS first,
so let's do that. Further investigation continues on the actual root
cause and a cure for external panels.
Fixes: 1a7fad2aea74 ("drm/i915/cx0: Enable dpll framework for MTL+")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/16098
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/16064
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/16042
Cc: Mika Kahola <mika.kahola@intel.com>
Cc: stable@vger.kernel.org # v7.0+
Tested-by: Jouni Högander <jouni.hogander@intel.com>
Tested-by: Marco Nenciarini <mnencia@kcore.it>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260612172617.3427027-1-imre.deak@intel.com
(cherry picked from commit 28783a274e886dd6da61419be6020bd9d0384e9f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
intel_crtc_put_color_blobs() drops the CRTC color blob references, but
leaves the corresponding pointers unchanged.
This can matter in intel_crtc_prepare_cleared_state(), which frees the
old CRTC hw state before calling intel_dp_tunnel_atomic_clear_stream_bw().
The latter can fail while looking up the DP tunnel group state, for
example with -EDEADLK.
If that happens, the function returns without completing the cleared
state preparation. The failed atomic state will then be cleared by the
atomic core and intel_crtc_free_hw_state() can be called again for the
same state, dropping the same blob references again.
Clear the blob pointers after dropping the references so repeated cleanup
of the same CRTC hw state is safe.
Fixes: 77fcf58df15e ("drm/i915/dp_tunnel: Fix error handling when clearing stream BW in atomic state")
Suggested-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260612035310.3013066-1-lgs201920130244@gmail.com
(cherry picked from commit d5005addb5f68e8a0edce249506757bdc9e3d8c8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The sharpness filter property is on the CRTC (as opposed to the
connector) so the expectation is that it's usable on all output
types. Since the sharpness filter is now fully integrateds into
the normal pfit code intel_pfit_compute_config() must be called
from the encoder .compute_config() on all relevant output types.
Sharpness filter is supported on LNL+ so only HDMI and DP SST/MST
outputs are actually relevant. I already took care of HDMI and
DP SST, but (as usual) forgot about DP MST. Add the missing
intel_pfit_compute_config() call to make the sharpness filter
operational on DP MST as well.
Cc: Nemesa Garg <nemesa.garg@intel.com>
Fixes: d4686f34bbeb ("drm/i915/pfit: Call intel_pfit_compute_config() unconditionally on (e)DP/HDMI")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260409100841.1907-1-ville.syrjala@linux.intel.com
Reviewed-by: Nemesa Garg <nemesa.garg@intel.com>
(cherry picked from commit ca97f5546f191bf460b3f4b59ade3ea5e7378796)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
"Fixes to tool and kunit core and new features to both to support JUnit
XML (primitive) and backtrace suppression API:
- Core support for suppressing warning backtraces
- Parse and print the reason tests are skipped
- Add (primitive) support for outputting JUnit XML
- Don't write to stdout when it should be disabled
- Add backtrace suppression self-tests
- Suppress intentional warning backtraces in scaling unit tests
- Add documentation for warning backtrace suppression API
- Fix spelling mistakes in comments and messages
- gen_compile_commands: Ignore libgcc.a
- qemu_configs: Add or1k / openrisc configuration"
* tag 'linux_kselftest-kunit-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit:tool: Don't write to stdout when it should be disabled
kunit: tool: Add (primitive) support for outputting JUnit XML
kunit: tool: Parse and print the reason tests are skipped
kunit: Add documentation for warning backtrace suppression API
drm: Suppress intentional warning backtraces in scaling unit tests
kunit: Add backtrace suppression self-tests
bug/kunit: Core support for suppressing warning backtraces
kunit: Fix spelling mistakes in comments and messages
kunit: qemu_configs: Add or1k / openrisc configuration
gen_compile_commands: Ignore libgcc.a
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- Support for "allocation tokens" (currently available in Clang 22+)
for smarter partitioning of kmalloc caches based on the allocated
object type, which can be enabled instead of the "random"
per-caller-address-hash partitioning.
It should be able to deterministically separate types containing a
pointer from those that do not (Marco Elver)
- Improvements and simplification of the kmem_cache_alloc_bulk() and
mempool_alloc_bulk() API. This includes adaptation of callers
(Christoph Hellwig)
- Performance improvements and cleanups related mostly to sheaves
refill (Hao Li, Shengming Hu, Vlastimil Babka)
- Several fixups for the slabinfo tool (Xuewen Wang)
* tag 'slab-for-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/slab: do not limit zeroing to orig_size when only red zoning is enabled
mm/slub: preserve original size in _kmalloc_nolock_noprof retry path
mm: simplify the mempool_alloc_bulk API
mm/slab: improve kmem_cache_alloc_bulk
mm/slub: detach and reattach partial slabs in batch
mm/slub: introduce helpers for node partial slab state
mm/slub: use empty sheaf helpers for oversized sheaves
tools/mm/slabinfo: remove redundant slab->partial assignment
tools/mm/slabinfo: remove dead assignment in get_obj_and_str()
tools/mm/slabinfo: Fix trace disable logic inversion
MAINTAINERS: add slab-related scripts and tools to SLAB ALLOCATOR
mm/slub: fix typo in sheaves comment
mm, slab: simplify returning slab in __refill_objects_node()
mm, slab: add an optimistic __slab_try_return_freelist()
slab: fix kernel-docs for mm-api
slab: improve KMALLOC_PARTITION_RANDOM randomness
slab: support for compiler-assisted type-based slab cache partitioning
mm/slub: defer freelist construction until after bulk allocation from a new slab
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
"Beside the removal of the Hercules monochrome ISA graphics driver and
the corresponding text console driver, there is just the typical
maintanance with smaller driver fixes and cleanups:
Removal of drivers:
- Hercules monochrome ISA graphics adapter driver (Ethan Nelson-Moore)
- Hercules mdacon console driver (Ethan Nelson-Moore)
Changes affecting many drivers at once:
- possible memory leak fixes in various drivers (Abdun Nihaal)
- many conversions to use strscpy() (David Laight)
- Use named initializers in drivers (Uwe Kleine-König)
Code fixes:
- fbcon: don't suspend/resume when vc is graphics mode (Lu Yao)
- modedb: fix a possible UAF in fb_find_mode() (Tuo Li)
- modedb: Fix entry for 1920x1080-60 mode (Steffen Persvold)
- arm: Export acorndata_8x8 font symbol for bootloader (Helge Deller)
- omap2: fix use-after-free in omapfb_mmap (Hongling Zeng)
Cleanups:
- pxa168fb: use devm_ioremap_resource() (Alberto Arostegui)
- provice helpers for fb_set_var() and fb_blank() and fbcon updates
(Thomas Zimmermann)
- fbcon: Use correct type for vc_resize() return value (Jiacheng Yu)
- chipsfb: add missing MODULE_DESCRIPTION() macro (Rahman Mahmutović)
- sunxvr2500: replace printk with device-aware logging functions
(Rahman Mahmutović)
- sm712: Fix operator precedence in big_swap macro (Li RongQing)
- imxfb: Use of_device_get_match_data() (Rosen Penev)
- atmel_lcdfb: Use of_device_get_match_data() (Rosen Penev)
Documentation fixes:
- grvga: Fix CLUT register address offset in comment (Eduardo Silva)
- omap/dss: Fix stale modedb.c path (Costa Shulyupin)
- correct CONFIG_FB_TILEBLITTING macro name in #endif comment (Ethan
Nelson-Moore)"
* tag 'fbdev-for-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (43 commits)
fbdev: modedb: Fix misaligned fields in the 1920x1080-60 mode
fbdev: modedb: fix a possible UAF in fb_find_mode()
fbdev: s3fb: Use strscpy() to copy strings into arrays
fbdev: sm501fb: Fix buffer errors in OF binding code
fbcon: correct CONFIG_FB_TILEBLITTING macro name in #endif comment
fbdev/arm: Export acorndata_8x8 font symbol for bootloader
fbdev: mmpfb: Use strscpy() to copy device name
fbdev: sisfb: Replace strlen() strcpy() pair with strscpy()
fbdev: rivafb: Use strscpy() to copy device name
fbdev: cyber2000fb: Use strscpy() to copy device name
fbdev: atmel_lcdfb: Use strscpy() to copy device name
fbdev: Do not export fbcon from fbdev
fbdev: Wrap fbcon updates from vga-switcheroo in helper
fbdev: Wrap user-invoked calls to fb_blank() in helper
fbdev: Wrap user-invoked calls to fb_set_var() in helper
fbdev: omap2: fix use-after-free in omapfb_mmap
docs: omap/dss: Fix stale modedb.c path
fbdev: pxa168fb: use devm_ioremap_resource() for MMIO
fbdev: grvga: Fix CLUT register address offset in comment
fbdev: sunxvr2500: replace printk with device-aware logging functions
...
|
|
The Tiled Display Topology ID of a DisplayID Tiled Display Topology Data
Block consists of three fields:
- Tiled Display Manufacturer/Vendor ID Field (3 bytes)
- Tiled Display Product ID Code Field (2 bytes)
- Tiled Display Serial Number Field (4 bytes)
i.e. a total of 9 bytes, not 8.
The DisplayID Tiled Display Topology ID is used as the tile group
identifier.
Update both struct displayid_tiled_block topology_id member and struct
drm_tile_group group_data member to full 9 bytes.
The group data was missing the last byte of the serial number. I don't
know whether there are known bug reports that might be linked to this,
but it's plausible the last byte could be the differentiating part for
the tile groups, and fewer tile groups might have been created than
intended.
Fixes: b49b55bd4fba ("drm/displayid: add displayid defines and edid extension (v2)")
Fixes: 138f9ebb9755 ("drm: add tile_group support. (v3)")
Cc: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org # v3.19+
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260610141549.555605-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip
Pull x86 cpuid updates from Ingo Molnar:
- CPUID API updates (Ahmed S. Darwish):
- Introduce a centralized CPUID parser
- Introduce a centralized CPUID data model
- Introduce <asm/cpuid/leaf_types.h>
- Rename cpuid_leaf()/cpuid_subleaf() APIs
- treewide: Explicitly include the x86 CPUID headers
- Update to x86-cpuid-db v3.1 (Maciej Wieczor-Retman)
- Continued removal of pre-i586 support and related simplifications
(Ingo Molnar)
- Add Intel CPU model number for rugged Panther Lake (Tony Luck)
- Misc fixes, updates and cleanups by Arnd Bergmann, Chao Gao, Lukas
Bulwahn, Sohil Mehta, Maciej Wieczor-Retman.
* tag 'x86-cpu-2026-06-14' of gitolite.kernel.org:pub/scm/linux/kernel/git/tip/tip: (25 commits)
x86/cpu: Make CONFIG_X86_CX8 unconditional
x86/cpu: Remove unused !CONFIG_X86_TSC code
x86/cpuid: Update bitfields to x86-cpuid-db v3.1
tools/x86/kcpuid: Update bitfields to x86-cpuid-db v3.1
x86/cpu: Make CONFIG_X86_TSC unconditional
MAINTAINERS: Drop obsolete FPU EMULATOR section
x86/cpu: Fix a F00F bug warning and clean up surrounding code
x86/cpu: Add Intel CPU model number for rugged Panther Lake
x86/cpuid: Introduce a centralized CPUID parser
x86/cpu: Introduce a centralized CPUID data model
x86/cpuid: Introduce <asm/cpuid/leaf_types.h>
x86/cpuid: Rename cpuid_leaf()/cpuid_subleaf() APIs
x86/cpu: Do not include the CPUID API header in asm/processor.h
Documentation: core-api/cpu_hotplug: Remove stale cpu0_hotplug docs
x86/cpu, cpufreq: Remove AMD ELAN support
x86/fpu: Remove the math-emu/ FPU emulation library
x86/fpu: Remove the 'no387' boot option
x86/fpu: Remove MATH_EMULATION and related glue code
treewide: Explicitly include the x86 CPUID headers
x86/cpu: Remove the CONFIG_X86_INVD_BUG quirk
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"Deferred probe:
- Fix race where deferred probe timeout work could be permanently
canceled by using mod_delayed_work()
- Fix missing jiffies conversion in deferred_probe_extend_timeout()
- Guard timeout extension with delayed_work_pending() to prevent
premature firing
- Use system_percpu_wq instead of the deprecated system_wq
- Update deferred_probe_timeout documentation
device:
- Replace direct struct device bitfield access (can_match, dma_iommu,
dma_skip_sync, dma_ops_bypass, state_synced, dma_coherent,
of_node_reused, offline, offline_disabled) with flag-based
accessors using bit operations
- Reject devices with unregistered buses
- Delete unused DEVICE_ATTR_PREALLOC()
- Add low-level device attribute macros with const show/store
callbacks, allowing device attributes to reside in read-only memory
- Move core device attributes to read-only memory
- Constify group array pointers in driver_add_groups() /
driver_remove_groups(), struct bus_type, and struct device_driver
device property:
- Fix fwnode reference leak in fwnode_graph_get_endpoint_by_id()
- Initialize all fields of fwnode_handle in fwnode_init()
- Provide swnode_get()/swnode_put() wrappers around kobject_get/put()
- Allow passing struct software_node_ref_args pointers directly to
PROPERTY_ENTRY_REF()
driver_override:
- Migrate amba, cdx, vmbus, and rpmsg to the generic driver_override
infrastructure, fixing a UAF from unsynchronized access to
driver_override in bus match() callbacks
- Remove the now-unused driver_set_override()
firmware loader:
- Fix recursive lock deadlock in device_cache_fw_images() when async
work falls back to synchronous execution
- Fix device reference leak in firmware_upload_register()
platform:
- Pass KBUILD_MODNAME through the platform driver registration macro
to create module symlinks in sysfs for built-in drivers; move
module_kset initialization to a pure_initcall and tegra cbb
registration to core_initcall to ensure correct ordering
- Pass THIS_MODULE implicitly through a coresight_init_driver() macro
sysfs:
- Upgrade OOB write detection in sysfs_kf_seq_show() from printk to
WARN
- Add return value clamping to sysfs_kf_read()
Rust:
- ACPI:
Fix missing match data for PRP0001 by exporting
acpi_of_match_device()
- Auxiliary:
Replace drvdata() with dedicated registration data on
auxiliary_device. drvdata() exposed the driver's bus device private
data beyond the driver's own scope, creating ordering constraints
and forcing the data to outlive all registrations that access it.
Registration data is instead scoped structurally to the
Registration object, making lifecycle ordering enforced by
construction rather than convention.
- Rust-native device driver lifetimes (HRT):
Allow Rust device drivers to carry a lifetime parameter on their
bus device private data, tied to the device binding scope -- the
interval during which a bus device is bound to a driver. Device
resources like pci::Bar<'a> and IoMem<'a> can be stored directly in
the driver's bus device private data with a lifetime bounded by the
binding scope, so the compiler enforces at build time that they do
not outlive the binding. This removes Devres indirection from every
access site and eliminates try_access() failure paths in
destructors.
Bus driver traits use a Generic Associated Type (GAT) Data<'bound>
to introduce the lifetime on the private data, rather than
parameterizing the Driver trait itself. Auxiliary registration
data, where the lifetime is not introduced by a trait callback but
must be threaded through Registration, uses the ForLt trait (a
type-level abstraction for types generic over a lifetime).
Misc:
- Fix DT overlayed devices not probing by reverting the broken
treewide overlay fix and re-running fw_devlink consumer pickup when
an overlay is applied to a bound device
- Use root_device_register() for faux bus root device; add sanity
check for failed bus init
- Fix dev_has_sync_state() data race with READ_ONCE() and move it to
base.h
- Avoid spurious device_links warning when removing a device while
its supplier is unbinding
- Switch ISA bus to dynamic root device
- Fix suspicious RCU usage in kernfs_put()
- Remove devcoredump exit callback
- Constify devfreq_event_class"
* tag 'driver-core-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/driver-core/driver-core: (81 commits)
software node: allow passing reference args to PROPERTY_ENTRY_REF()
driver core: platform: set mod_name in driver registration
coresight: pass THIS_MODULE implicitly through a macro
kernel: param: initialize module_kset in a pure_initcall
soc/tegra: cbb: Move driver registration from pure_initcall to core_initcall
firmware_loader: Fix recursive lock in device_cache_fw_images()
driver core: Use system_percpu_wq instead of system_wq
driver core: remove driver_set_override()
rpmsg: use generic driver_override infrastructure
Drivers: hv: vmbus: use generic driver_override infrastructure
cdx: use generic driver_override infrastructure
amba: use generic driver_override infrastructure
rust: devres: add 'static bound to Devres<T>
samples: rust: rust_driver_auxiliary: showcase lifetime-bound registration data
rust: auxiliary: generalize Registration over ForLt
rust: types: add `ForLt` trait for higher-ranked lifetime support
gpu: nova-core: separate driver type from driver data
samples: rust: rust_driver_pci: use HRT lifetime for Bar
rust: io: make IoMem and ExclusiveIoMem lifetime-parameterized
rust: pci: make Bar lifetime-parameterized
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These add new hardware support (i.MX93 TMU, Amlogic T7, Intel Arrow
Lake, QCom Nord, Shikra and Hawi), fix issues in a number of places in
the thermal control core and drivers, clean up code and refactor it in
preparation for future changes:
- Rework the initialization and cleanup of thermal class cooling
devices to separate DT-based cooling device registration and
cooling device registration without DT (Daniel Lezcano, Ovidiu
Panait)
- Update the cooling device DT bindings to support 3-cell cooling
device representation, where the additional cell holds an ID to
select a cooling mechanism for devices that offer multiple cooling
mechanisms, and adjust the cooling device registration code
accordingly (Gaurav Kohli, Daniel Lezcano)
- Remove dead code from two functions in the thermal core and
simplify the unregistration of thermal governors (Rafael Wysocki)
- Fix critical temperature attribute removal handling in the generic
thermal zone hwmon support code and rework that code to register a
separate hwmon class device for each thermal zone (instead of using
one hwmon class device for all thermal zones of the same type) to
address thermal zone removal deadlocks (Rafael Wysocki)
- Use attribute groups for adding temperature attributes to hwmon
class devices associated with thermal zones (Rafael Wysocki)
- Pass WQ_UNBOUND when allocating the thermal workqueue (Marco
Crivellari)
- Fix potential shift overflow in ptc_mmio_write() and improve error
handling in proc_thermal_ptc_add() in the int340x thermal control
driver (Aravind Anilraj)
- Use sysfs_emit() for cpumask printing in the Intel powerclamp
thermal driver (Yury Norov)
- Add Arrow Lake CPU models to the intel_tcc_cooling driver (Srinivas
Pandruvada)
- Add QCom Nord, Shikra and Hawi temperature sensor DT bindings
(Deepti Jaggi, Gaurav Kohli, Dipa Ramesh Mantre)
- Use devm_add_action_or_reset() for clock disable on the NVidia
soctherm and switch it to devm cooling device registration version
(Daniel Lezcano)
- Add the Amlogic T7 thermal sensor along with thermal calibration
data read from SMC calls (Ronald Claveau)
- Fix atomic temperature read in the QCom tsens driver to comply with
hardware documentation (Priyansh Jain)
- Add SpacemiT K1 thermal sensor support (Shuwei Wu)
- Add i.MX93 temperature sensor support and filter out the invalid
temperature (Jacky Bai)
- Enable by default the TMU (Thermal Monitoring Unit) on Exynos
platform (Krzysztof Kozlowski)
- Rework interrupt initialization in the Tsens driver and add the
optional wakeup source (Priyansh Jain)
- Fix typo in a comment in the TSens QCom driver (Jinseok Kim)
- Fix trailing whitespace and repeated word in the OF code, remove
quoted string splitting across lines from the iMX7 driver, and
remove a stray space from the thermal_trip_of_attr() macro
definition (Mayur Kumar)
- Update the thermal testing facility code to avoid NULL pointer
dereferences by rejecting missing command arguments and replace
sscanf() with kstrtoint() or kstrtoul() in that code (Ovidiu
Panait, Samuel Moelius)"
* tag 'thermal-7.2-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
thermal: sysfs: Replace sscanf() with kstrtoul()
thermal: testing: Replace sscanf() with kstrtoint()
thermal: testing: reject missing command arguments
thermal: intel: intel_tcc_cooling: Add Arrow Lake CPU models
thermal/drivers/qcom/tsens: Disable wakeup interrupt setup on automotive targets
thermal/drivers/qcom/tsens: Switch wake IRQ handling to PM callbacks
thermal/core: Fix missing stub for devm_thermal_cooling_device_register
dt-bindings: thermal: cooling-devices: Update support for 3 cells cooling device
thermal/of: Support cooling device ID in cooling-spec
thermal/of: Pass cdev_id and introduce devm registration helper
thermal/of: Add cooling device ID support
thermal/of: Rename the devm_thermal_of_cooling_device_register() function
thermal/core: Make cooling device OF node conditional on CONFIG_THERMAL_OF
thermal/of: Move cooling device OF helpers out of thermal core
hwmon: Use non-OF thermal cooling device registration API
thermal/core: Add devm_thermal_cooling_device_register()
thermal/core: Introduce non-OF thermal_cooling_device_register()
thermal/drivers/samsung: Enable TMU by default
thermal/driver/qoriq: Workaround unexpected temperature readings from tmu
thermal/drivers/qoriq: Add i.MX93 tmu support
...
|
|
Pull Rust updates from Miguel Ojeda:
"This one is big due to the vendoring of the `zerocopy` library, which
allows us to replace a bunch of `unsafe` code dealing with conversions
between byte sequences and other types with safe alternatives. More
details on that below (and in its merge commit).
Toolchain and infrastructure:
- Introduce support for the 'zerocopy' library [1][2]:
Fast, safe, compile error. Pick two.
Zerocopy makes zero-cost memory manipulation effortless. We write
`unsafe` so you don't have to.
It essentially provides derivable traits (e.g. 'FromBytes') and
macros (e.g. 'transmute!') for safely converting between byte
sequences and other types. Having such support allows us to remove
some 'unsafe' code.
It is among the most downloaded Rust crates and it is also used by
the Rust compiler itself.
It is licensed under "BSD-2-Clause OR Apache-2.0 OR MIT".
The crates are imported essentially as-is (only +2/-3 lines needed
to be adapted), plus SPDX identifiers. Upstream has since added the
SPDX identifiers as well as one of the tweaks at my request, thus
reducing our future diffs on updates -- I keep the details in one
of our usual live lists [3].
In total, it is about ~39k lines added, ~32k without counting
'benches/' which are just for documentation purposes.
The series includes a few Kbuild and rust-analyzer improvements and
an example patch using it in Nova, removing one 'unsafe impl'.
I checked that the codegen of an isolated example function (similar
to the Nova patch on top) is essentially identical. It also turns
out that (for that particular case) the 'zerocopy' version, even
with 'debug-assertions' enabled, has no remaining panics, unlike a
few in the current code (since the compiler can prove the remaining
'ub_checks' statically).
So their "fast, safe" does indeed check out -- at least in that
case.
- Support AutoFDO. This allows Rust code to be profiled and optimized
based on the profile. Tested with Rust Binder: ~13% slower without
AutoFDO in the binderAddInts benchmark (using an app-launch
benchmark for the profile).
- Support Software Tag-Based KASAN.
In addition, fix KASAN Kconfig by requiring Clang.
- Add Kconfig options for each existing Rust KUnit test suite, such
as 'CONFIG_RUST_BITMAP_KUNIT_TEST'.
They are placed within a new menu, 'CONFIG_RUST_KUNIT_TESTS', in
the new 'rust/kernel/Kconfig.test' file.
- Support the upcoming Rust 1.98.0 release (expected 2026-08-20):
lint cleanups and an unstable flag rename.
- Disable 'rustdoc' documentation inlining for all prelude items,
which bloats the generated documentation.
- Ignore (in Git) and clean (in Kbuild) the (rarely) 'rustc'-generated
'*.long-type-*.txt' files.
'kernel' crate:
- Add new 'bitfield' module with the 'bitfield!' macro (extracted
from the existing 'register!' one), which declares integer types
that are split into distinct bit fields of arbitrary length.
Each field is a 'Bounded' of the appropriate bit width (ensuring
values are properly validated and avoiding implicit data loss) and
gets several generated getters and setters (infallible, 'const' and
fallible) as well as associated constants ('_MASK', '_SHIFT' and
'_RANGE'). It also supports fields that can be converted from/to
custom types, either fallibly ('?=>') or infallibly ('=>').
For instance:
bitfield! {
struct Rgb(u16) {
15:11 blue;
10:5 green;
4:0 red;
}
}
// Compile-time checks.
let color = Rgb::zeroed().with_const_green::<0x1f>();
assert_eq!(color.green(), 0x1f);
assert_eq!(color.into_raw(), 0x1f << Rgb::GREEN_SHIFT);
Add as well documentation and a test suite for it, as usual; and
update the 'register!' macro to use it.
It will be maintained by Alexandre Courbot (with Yury Norov as
reviewer) under a new 'MAINTAINERS' entry: 'RUST [BITFIELD]'.
- 'ptr' module: rework index projection syntax into keyworded syntax
and introduce panicking variant.
The keyword syntax ('build:', 'try:', 'panic:') is more explicit
and paves the way of perhaps adding more flavors in the future,
e.g. an 'unsafe' index projection.
For instance, projections now look like this:
fn f(p: *const [u8; 32]) -> Result {
// Ok, within bounds, checked at build time.
project!(p, [build: 1]);
// Build error.
project!(p, [build: 128]);
// `OutOfBound` runtime error (convertible to `ERANGE`).
project!(p, [try: 128]);
// Runtime panic.
project!(p, [panic: 128]);
Ok(())
}
Update as well the users, which now look like e.g.
// Pointer to the first entry of the GSP message queue.
let data = project!(self.0.as_ptr(), .gspq.msgq.data[build: 0]);
- 'build_assert' module: make the module the home of its macros
instead of rendering them twice.
- 'sync' module: add 'UniqueArc::as_ptr()' associated function.
- 'alloc' module:
- Fix the 'Vec::reserve()' doctest to properly account for the
existing vector length in the capacity assertion.
- Fix an incorrect operator in the 'Vec::extend_with()' 'SAFETY'
comment; add a doc test demonstrating basic usage and the
zero-length case.
- Clean imports across several modules to follow the "kernel
vertical" import style in order to minimize conflicts.
'pin-init' crate:
- User visible changes:
- Do not generate 'non_snake_case' warnings for identifiers that
are syntactically just users of a field name. This would allow
all '#[allow(non_snake_case)]' in nova-core to be removed,
which Gary will send to the nova tree next cycle.
- Filter non-cfg attributes out properly in derived structs. This
improves pin-init compatibility with other derive macros.
- Insert projection types' where clause properly.
- Other changes:
- Bump MSRV to 1.82, plus associated cleanups.
- Overhaul how init slots are projected. The new approach is
easier to justify with safety comments.
- Mark more functions as inline, which should help mitigate the
super-long symbol name issue due to lack of inlining.
rust-analyzer:
- Support '--envs' for passing env vars for crates like 'zerocopy'.
'MAINTAINERS':
- Add the following reviewers to the 'RUST' entry:
- Daniel Almeida
- Tamir Duberstein
- Alexandre Courbot
- Onur Özkan
They have been involved in the Rust for Linux project for about 7
collective years and bring expertise across several domains, which
will be very useful to have around in the future.
Thanks everyone for stepping up!
And some other fixes, cleanups and improvements"
Link: https://github.com/google/zerocopy [1]
Link: https://docs.rs/zerocopy [2]
Link: https://github.com/Rust-for-Linux/linux/issues/1239 [3]
* tag 'rust-7.2' of gitolite.kernel.org:pub/scm/linux/kernel/git/ojeda/linux: (86 commits)
MAINTAINERS: add Onur Özkan as Rust reviewer
MAINTAINERS: add Alexandre Courbot as Rust reviewer
MAINTAINERS: add Tamir Duberstein as Rust reviewer
MAINTAINERS: add Daniel Almeida as Rust reviewer
kbuild: rust: clean `zerocopy-derive` in `mrproper`
rust: make `build_assert` module the home of related macros
rust: str: clean unused import for Rust >= 1.98
rust: str: use the "kernel vertical" imports style
rust: aref: use the "kernel vertical" imports style
rust: page: use the "kernel vertical" imports style
gpu: nova-core: firmware: parse `FalconUCodeDescV2` via `zerocopy`
rust: prelude: add `zerocopy{,_derive}::FromBytes`
rust: zerocopy-derive: enable support in kbuild
rust: zerocopy-derive: add `README.md`
rust: zerocopy-derive: avoid generating non-ASCII identifiers
rust: zerocopy-derive: add SPDX License Identifiers
rust: zerocopy-derive: import crate
rust: zerocopy: enable support in kbuild
rust: zerocopy: add `README.md`
rust: zerocopy: remove float `Display` support
...
|
|
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly request
WQ_PERCPU.
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"Looks like it's settled down a bit more thankfully. Small changes
across the board, amdgpu/xe leading with some colorop changes in the
core/amd. Otherwise some misc driver fixes.
colorop:
- make lut interpolation mutable
- track colorop updates correctly
amdgpu:
- UserQ fix
- Userptr fix
- MCCS freesync fix
- track colorop changes correctly
amdkfd:
- Fix an event information leak
- Events bounds check fix
- Trap cleanup fix
i915:
- Check supported link rates DPCD read
- Fix phys BO pread/pwrite with offset
xe:
- fix oops in suspend/shutdown without display
- RAS fixes
- Use HW_ERR prefix in log
- include all registered queues in TLB invalidation
- Fix refcount leak in xe_range_tree in error paths
- fix job timeout recovery for unstarted jobs and kernel queues
amdxdna:
- fix possible leak of mm_struct
ivpu:
- fix integer truncation
vc4:
- fix leak in krealloc() error handling
virtio:
- fix dma_fence ref-count leak"
* tag 'drm-fixes-2026-06-13' of https://gitlab.freedesktop.org/drm/kernel: (24 commits)
accel/amdxdna: Fix mm_struct reference leak in aie2_populate_range()
drm/xe: fix job timeout recovery for unstarted jobs and kernel queues
drm/xe: fix refcount leak in xe_range_fence_insert()
drm/xe: include all registered queues in TLB invalidation
drm/xe/hw_error: Use HW_ERR prefix in log
drm/xe/drm_ras: Add per node cleanup action
drm/xe/drm_ras: Make counter allocation drm managed
drm/xe/display: fix oops in suspend/shutdown without display
drm/amd/display: use plane color_mgmt_changed to track colorop changes
drm/atomic: track individual colorop updates
drm/colorop: make lut(1/3)d_interpolation props correctly behave as mutable
drm/colorop: Remove read-only comments from interpolation fields
drm/i915/gem: Fix phys BO pread/pwrite with offset
drm/vc4: fix krealloc() memory leak
drm/virtio: Fix driver removal with disabled KMS
drm/i915/edp: Check supported link rates DPCD read
accel/ivpu: Fix signed integer truncation in IPC receive
drm/virtio: fix dma_fence refcount leak on error in virtio_gpu_dma_fence_wait()
drm/amd/display: Consult MCCS FreeSync cap only if requested & supported
drm/amdkfd: Unwind debug trap enable on copy_to_user failure
...
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
amd:
- track colorop changes correctly
amdxdna:
- fix possible leak of mm_struct
colorop:
- make lut interpolation mutable
- track colorop updates correctly
ivpu:
- fix integer truncation
vc4:
- fix leak in krealloc() error handling
virtio:
- fix dma_fence ref-count leak
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260612081418.GA17001@2a02-2455-9062-2500-e496-5a17-62ba-545e.dyn6.pyur.net
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
Driver Changes:
- fix oops in suspend/shutdown without display (Jani)
- RAS fixes (Raag)
- Use HW_ERR prefix in log (Raag)
- include all registered queues in TLB invalidation (Tangudu)
- Fix refcount leak in xe_range_tree in error paths (Wentao)
- fix job timeout recovery for unstarted jobs and kernel queues (Rodrigo)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/aitt8ZkYmxIT9cdP@gsse-cloud1.jf.intel.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-fixes
- Check supported link rates DPCD read [edp] (Nikita Zhandarovich)
- Fix phys BO pread/pwrite with offset [gem] (Joonas Lahtinen)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tursulin@igalia.com>
Link: https://patch.msgid.link/aipkcUDnTlzre-8F@linux
|
|
|
|
A job that GuC never scheduled (never started) indicates a GuC
scheduling failure; previously such jobs were silently errored out
instead of triggering a GT reset to recover. Trigger a GT reset and
resubmit them, but only when the queue was not already killed or banned:
an unstarted job on an already banned queue is the ban working as
intended and must neither clear the ban nor kick off a reset, otherwise
a banned userspace queue could be resurrected and spam GT resets.
Kernel queues are always recovered this way and wedge the device once
recovery attempts are exhausted, since kernel work must not silently
fail. A started job that times out on a userspace VM bind queue stays
banned rather than being reset and retried.
The queue is banned early in the timeout handler to signal the G2H
scheduling-done handler so it wakes the disable-scheduling waiter;
without it the waiter sleeps the full 5s timeout. When a reset is
warranted the ban is cleared before rearming so that
guc_exec_queue_start() can resubmit jobs after the GT reset - a
still-banned queue would block resubmission and cause an infinite TDR
loop. The already-banned case is gated out before this point via
skip_timeout_check, so it is unaffected.
v2: (Himal) Do it for any queue type, not just kernel/migration
v3: - (Sashiko and Sanjay): don't clear the ban / GT reset for already
killed/banned queues on unstarted-job timeout
- Update commit message
- (Matt) Add Fixes tag
Fixes: fe05cee4d953 ("drm/xe: Don't short circuit TDR on jobs not started")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Assisted-by: GitHub-Copilot:claude-sonnet-4.6
Assisted-by: GitHub-Copilot:claude-opus-4.8
Tested-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Reviewed-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patch.msgid.link/20260610152548.404575-3-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit b1107d085e7e8ed15ba6f80c102528a9c8a6cb0e)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
xe_range_fence_insert() acquires a reference on fence via
dma_fence_get() and stores it in rfence->fence. It then calls
dma_fence_add_callback() and handles two cases: when the callback
is successfully registered (err == 0) the fence is transferred to
the tree for later cleanup; when the fence is already signaled
(err == -ENOENT) it manually drops the extra reference with
dma_fence_put(fence).
However, dma_fence_add_callback() can fail with other errors
(e.g. -EINVAL) and in that case the code falls through to the free:
label without releasing the acquired reference, leaking it.
Fix the leak by adding an else branch that calls dma_fence_put()
before jumping to free: for any error other than -ENOENT.
Fixes: 845f64bdbfc9 ("drm/xe: Introduce a range-fence utility")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260610172705.3450560-1-matthew.brost@intel.com
(cherry picked from commit 98c4a4201290823c2c5c7ba21692bd9a64b61021)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
Context-based TLB invalidation currently selects only scheduling-active
exec queues via q->ops->active(). During rebind flows, queues may be
suspended (or transitioning through resume) while still owning valid
translations, causing them to be skipped from invalidation and leading
to missed TLB invalidations on LR rebinds.
The underlying issue is a TOCTOU: q->guc->state bits are flipped lock-free
from enable_scheduling(), disable_scheduling{,_deregister}(), the
suspend/resume sched-msg handlers, handle_sched_done(), and
guc_exec_queue_stop(); nothing in send_tlb_inval_ctx_ppgtt() serializes
against them, so any state-based predicate can race.
Include all the registered queues so that TLB invalidations are not
missed. This is race-free because list membership on vm->exec_queues.list
is stable under vm->exec_queues.lock held by the caller. The performance
impact is expected to be minimal and harmless. If it does turn out to be
a concern, we can come back with a race-safe solution to ignore certain
queues.
Fixes: 6cdaa5346d6f ("drm/xe: Add context-based invalidation to GuC TLB invalidation backend")
Assisted-by: Claude:claude-opus-4.6
Suggested-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Signed-off-by: Tangudu Tilak Tirumalesh <tilak.tirumalesh.tangudu@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260608162745.338725-2-tilak.tirumalesh.tangudu@intel.com
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
(cherry picked from commit aa625e1e9f0710e424fe4f0e3f032807df81b5b0)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
Hardware errors should be logged with HW_ERR prefix. Make them
consistent with existing logs.
Fixes: 01aab7e1c9d4 ("drm/xe/xe_hw_error: Add support for PVC SoC errors")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://patch.msgid.link/20260602044919.702209-5-raag.jadav@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit ad60a618c49fef07d1860bfb1091140d29f5eddb)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
cleanup_node_param() is not registered for previous node in case of counter
allocation failure, which results in stale memory of previous node that
isn't cleaned up on unwind. Add per node cleanup action which guarantees
cleanup on unwind and also simplifies the cleanup logic.
Fixes: b40db12b542f ("drm/xe/xe_drm_ras: Add support for XE DRM RAS")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://patch.msgid.link/20260602044919.702209-4-raag.jadav@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 67fc5543d8274b2fcbef87734fad0469358f4478)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
cleanup_node_param() is not registered for previous node in case of counter
allocation failure, which results in stale memory of previous node that
isn't cleaned up on unwind. Fix this using drm managed allocation, which is
guaranteed to be cleaned up on unwind.
Fixes: b40db12b542f ("drm/xe/xe_drm_ras: Add support for XE DRM RAS")
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Riana Tauro <riana.tauro@intel.com>
Link: https://patch.msgid.link/20260602044919.702209-3-raag.jadav@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 58d77c77ea0c5cb2b755ebe23e973c8272acd896)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
The xe driver keeps track of whether to probe display, and whether
display hardware is there, using xe->info.probe_display. It gets set to
false if there's no display after intel_display_device_probe(). However,
the display may also be disabled via fuses, detected at a later time in
intel_display_device_info_runtime_init().
In this case, the xe driver does for_each_intel_crtc() on uninitialized
mode config in xe_display_flush_cleanup_work(), leading to a NULL
pointer dereference, and generally calls display code with display info
cleared.
Check for intel_display_device_present() after
intel_display_device_info_runtime_init(), and reset
xe->info.probe_display as necessary. Also do unset_display_features()
for completeness, although display runtime init has already done
that. This will need to be unified across all cases later.
Move intel_display_device_info_runtime_init() call slightly earlier,
similar to i915, to avoid a bunch of unnecessary setup for no display
cases.
Note #1: The xe driver has no business doing low level display plumbing
like for_each_intel_crtc() to begin with. It all needs to happen in
display code.
Note #2: The actual bug is present already in commit 44e694958b95
("drm/xe/display: Implement display support"), but the oops was likely
introduced later at commit ddf6492e0e50 ("drm/xe/display: Make display
suspend/resume work on discrete").
Fixes: 44e694958b95 ("drm/xe/display: Implement display support")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/7904
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/work_items/6150
Cc: stable@vger.kernel.org # v6.8+
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260515160920.1082842-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 7c3eb9f47533220888a67266448185fd0775d4da)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
|
|
Ensure the driver tracks changes in any colorop property of a plane
color pipeline by using the same mechanism of CRTC color management and
update plane color blocks when any colorop property changes. It fixes an
issue observed on gamescope settings for night mode which is done via
shaper/3D-LUT updates.
Fixes: 9ba25915efba ("drm/amd/display: Add support for sRGB EOTF in DEGAM block")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patch.msgid.link/20260609110420.1298352-5-mwen@igalia.com
|
|
As we do for CRTC color mgmt properties, use color_mgmt_changed flag to
track any value changes in the color pipeline of a given plane, so that
drivers can update color blocks as soon as plane color pipeline or
individual colorop values change. Since we're here, only announce and
track changes to plane COLOR_PIPELINE prop if its value is actually
changing.
Fixes: 8c5ea1745f4c ("drm/colorop: Add BYPASS property")
Fixes: 7fa3ee8c0a79 ("drm/colorop: Define LUT_1D interpolation")
Fixes: 41651f9d42eb ("drm/colorop: Add 1D Curve subtype")
Fixes: 3410108037d5 ("drm/colorop: Add multiplier type")
Fixes: db971856bbe0 ("drm/colorop: Add 3D LUT support to color pipeline")
Fixes: e5719e7f1900 ("drm/colorop: Add 3x4 CTM type")
Fixes: 99a4e4f08abe ("drm/colorop: Add 1D Curve Custom LUT type")
Fixes: 2afc3184f3b3 ("drm/plane: Add COLOR PIPELINE property")
Reviewed-by: Harry Wentland <harry.wentland@amd.com> #v1
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Fixes: 9ba25915efba ("drm/amd/display: Add support for sRGB EOTF in DEGAM block")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patch.msgid.link/20260609110420.1298352-4-mwen@igalia.com
|
|
As interpolation props are actually mutable props, any changes should be
handled by drm_colorop_state. Move their enum and make it correctly
behaves as mutable.
Fixes: 7fa3ee8c0a79 ("drm/colorop: Define LUT_1D interpolation")
Fixes: db971856bbe0 ("drm/colorop: Add 3D LUT support to color pipeline")
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Fixes: 9ba25915efba ("drm/amd/display: Add support for sRGB EOTF in DEGAM block")
Signed-off-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patch.msgid.link/20260609110420.1298352-3-mwen@igalia.com
|
|
sg_page() returns struct page pointer not (void *) so the scaling
of pread/pwrite is wrong for phys BO and wrong parts of BO would be
accessed if non-zero offset is used.
Last impacted platform with overlay or cursor planes using phys
mapping was Gen3/945G/Lakeport.
Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Fixes: c6790dc22312 ("drm/i915: Wean off drm_pci_alloc/drm_pci_free")
Cc: <stable@vger.kernel.org> # v4.5+
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: Simona Vetter <simona@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patch.msgid.link/20260610060314.26111-1-joonas.lahtinen@linux.intel.com
(cherry picked from commit 3e49a2f85070b2fb672c1e0fdba281a4ea3aebe6)
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
|
|
Given the macro scoping rules, all macros are rendered twice, in the
module and in the top-level of kernel crate.
Add `#[doc(hidden)]` to the macro definition and `#[doc(inline)]` to the
re-export inside `build_assert` module so the top-level items are hidden.
[ Sadly, because the definition is hidden, `rustdoc` decides to not list
them as re-exports in the `prelude` page anymore, even if we refer to
the not-actually-hidden item.
- Miguel ]
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Acked-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260609142637.373347-1-gary@kernel.org
[ Kept a single declaration in the prelude, and reworded since they
already had `no_inline`. Removed other imports from `predefine` since
we now use the prelude. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Don't just overwrite the original pointer passed to krealloc()
with its return value without checking latter:
MEM = krealloc(MEM, SZ, GFP);
If krealloc() returns NULL, that erases the pointer
to the still allocated memory, hence leaks this memory.
Instead, use a temporary variable, check it's not NULL
and only then assign it to the original pointer:
TMP = krealloc(MEM, SZ, GFP);
if (!TMP) return;
MEM = TMP;
While on it, use krealloc_array().
Fixes: 6d45c81d229d ("drm/vc4: Add support for branching in shader validation.")
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260606123817.37222-1-grandmaster@al2klimov.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/drivers
soc/tegra: pmc: Changes for v7.2-rc1
The bulk of these changes converts existing users to the modern variants
of the API that take a PMC instance as argument. This completes the
transition to multi-instance support, which then makes room for cleanups
and restricting the remaining legacy APIs to 32-bit platforms.
Some changes in this set also clean up powergate debugfs and restrict
the power-off handler to be installed only where appropriate. Lastly,
support for Tegra238 is added.
* tag 'tegra-for-7.2-pmc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: pmc: Add Tegra238 support
soc/tegra: pmc: Restrict power-off handler to Nexus 7
soc/tegra: pmc: Populate powergate debugfs only when needed
soc/tegra: pmc: Move legacy code behind CONFIG_ARM guard
soc/tegra: pmc: Remove unused legacy functions
soc/tegra: pmc: Create PMC context dynamically
usb: xhci: tegra: Explicitly specify PMC instance to use
PCI: tegra: Explicitly specify PMC instance to use
media: vde: Explicitly specify PMC instance to use
drm/tegra: Explicitly specify PMC instance to use
drm/nouveau: tegra: Explicitly specify PMC instance to use
ata: ahci_tegra: Explicitly specify PMC instance to use
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
