| Age | Commit message (Collapse) | Author |
|
There is now a new LT9211 rev. U5, which reports chip ID 0x18 0x01 0xe4 .
The previous LT9211 reported chip ID 0x18 0x01 0xe3 , which is what the
driver checks for right now. Since there is a possibility there will be
yet another revision of the LT9211 in the future, drop the last version
nibble check to allow all future revisions of the chip to work with this
driver.
This fix makes LT9211 rev. U5 work with this driver.
Fixes: 8ce4129e3de4 ("drm/bridge: lt9211: Add Lontium LT9211 bridge driver")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251011110017.12521-1-marek.vasut@mailbox.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Move intel_cdclk_atomic_check() a bit so that we don't need an
extra intel_modeset_calc_cdclk() forward declaration.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-21-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
We no longer have anything of importance between
intel_cdclk_atomic_check() and intel_modeset_calc_cdclk(), so
hide the latter inside the former.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-20-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Currently we are considering the set of active pipes when
determining if we need to boost the cdclk due to glk audio
issues. Replace that with the set of logically enabled pipes
instead. That is generally how everything else cdclk related
is computed (cdclk_state->logical is based on logically
enabled pipes).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-19-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Add intel_calc_enabled_pipes() as the counterpart to
intel_calc_active_pipes(). We have some uses where the set
of logically enabled pipes makes more sense than the set of
active pipes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-18-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
There's no real reason anymore to tie cdclk updates to
state->modeset/any_ms. Always call the cdclk functions and
allow them to decide whether cdclk update is necessary/desired
or not.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-17-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
intel_crtc_compute_min_cdclk()
intel_bw_crtc_min_cdclk() depends only on per-crtc state,
so there is no real point in having it complicate the global
bw_min_cdclk. Instead let's just account for it in
intel_crtc_compute_min_cdclk().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-16-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Update crtc min_cdclk directly from when calling
intel_cdclk_update_crtc_min_cdclk() rather than doing it later
from intel_compute_min_cdclk().
This will eg. allow better control over when to update the
cdclk. For now we preserve the current behaviour by allowing
the cdclk to decrease when any pipe needs to do a full modeset.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-15-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
There's no reason to defer intel_plane_calc_min_cdclk() until
intel_cdclk_atomic_check(). Just do this as part of
intel_atomic_check_planes() (after we've added all the planes to
the state that affect the per-plane min_cdclk calculation).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-14-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Currently we call intel_cdclk_update_crtc_min_cdclk() per-plane.
That is rather wasteful, and also won't account for any of the
other per-pipe min_cdclk restrictions from
intel_crtc_compute_min_cdclk(). Change the behaviour to do
do the comparison per-crtc instead, and use the final min cdclk
as computed by intel_crtc_compute_min_cdclk().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-13-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Update bw_min_cdclk directly from intel_bw_calc_min_cdclk()
rather than doing it later from intel_compute_min_cdclk().
This will allow better control over when to update the
cdclk. For now we preserve the current behaviour by allowing
the cdclk to decrease when any pipe needs to do a full modeset.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-12-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Hide the cdclk state details better by providing a helper
(intel_cdclk_update_crtc_min_cdclk()) by which the crtc code
can inform the cdclk code about a new per-pipe min_cdclk value.
Note that this is currently being called once per-plane, but
it'll be changed to be just a single call for the whole pipe
later.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-11-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Hide the cdclk state details better by providing a helper
(intel_cdclk_update_bw_min_cdclk()) by which the bw code can
inform the cdclk code about a new bw_min_cdclk value.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-10-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
intel_cdclk_atomic_check()
Clean up the mess inside intel_modeset_calc_cdclk() a bit by
moving the intel_atomic_lock_global_state() for force_min_cdclk
changes into intel_cdclk_atomic_check().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-9-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
I plan to better decouple the cdclk computation from actual
modesets. To that end make the cdclk code self sufficient in
being able to determine if a full cdclk calculation/update is
needed or not due to some not strictly cdclk related reason.
Currently we have three such things that depend active_pipes:
- cdclk_state->actual
- glk audio w/a
- dg2 power well stuff
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-8-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Extract the code to determine the DG2 pipe power well count
into a small helper. I'll have other uses for this later.
TODO: need to move this power well stuff out from the cdclk code...
v2: Don't lose the early return from intel_cdclk_pcode_pre_notify()
(kernel test robot)
v3: Compare old vs. new, not old vs. old (Jani)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250926083950.24486-1-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Extract the glk audio w/a check into a small helper. We'll
have other uses for this later.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-6-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
intel_bw_modeset_checks() is now only called from
intel_bw_atomic_check() which alrady does the display
version check. Drop the redundant check from
intel_bw_modeset_checks().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-5-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
its active state
Currently we may end up doing a bunch of redundant bw_state
recomputation whenever any modeset happens. Skip a bunch of
that by only considering whether any pipe actually changes
its active state.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-4-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
intel_any_crtc_active_changed()
Introduce helpers that determine whether any crtc is changing
its active state. Will be useful for cdclk stuff.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-3-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
intel_any_crtc_enable_changed()
Introduce helpers that determine whether any crtc is changing
its enabled state. Will be useful for cdclk stuff.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250923171943.7319-2-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
|
|
Pull more drm fixes from Dave Airlie:
"Just the follow up fixes for rc1 from the next branch, amdgpu and xe
mostly with a single v3d fix in there.
amdgpu:
- DC DCE6 fixes
- GPU reset fixes
- Secure diplay messaging cleanup
- MES fix
- GPUVM locking fixes
- PMFW messaging cleanup
- PCI US/DS switch handling fix
- VCN queue reset fix
- DC FPU handling fix
- DCN 3.5 fix
- DC mirroring fix
amdkfd:
- Fix kfd process ref leak
- mmap write lock handling fix
- Fix comments in IOCTL
xe:
- Fix build with clang 16
- Fix handling of invalid configfs syntax usage and spell out the
expected syntax in the documentation
- Do not try late bind firmware when running as VF since it shouldn't
handle firmware loading
- Fix idle assertion for local BOs
- Fix uninitialized variable for late binding
- Do not require perfmon_capable to expose free memory at page
granularity. Handle it like other drm drivers do
- Fix lock handling on suspend error path
- Fix I2C controller resume after S3
v3d:
- fix fence locking"
* tag 'drm-next-2025-10-11-1' of https://gitlab.freedesktop.org/drm/kernel: (34 commits)
drm/amd/display: Incorrect Mirror Cositing
drm/amd/display: Enable Dynamic DTBCLK Switch
drm/amdgpu: Report individual reset error
drm/amdgpu: partially revert "revert to old status lock handling v3"
drm/amd/display: Fix unsafe uses of kernel mode FPU
drm/amd/pm: Disable VCN queue reset on SMU v13.0.6 due to regression
drm/amdgpu: Fix general protection fault in amdgpu_vm_bo_reset_state_machine
drm/amdgpu: Check swus/ds for switch state save
drm/amdkfd: Fix two comments in kfd_ioctl.h
drm/amd/pm: Avoid interface mismatch messaging
drm/amdgpu: Merge amdgpu_vm_set_pasid into amdgpu_vm_init
drm/amd/amdgpu: Fix the mes version that support inv_tlbs
drm/amd: Check whether secure display TA loaded successfully
drm/amdkfd: Fix mmap write lock not release
drm/amdkfd: Fix kfd process ref leaking when userptr unmapping
drm/amdgpu: Fix for GPU reset being blocked by KIQ I/O.
drm/amd/display: Disable scaling on DCE6 for now
drm/amd/display: Properly disable scaling on DCE6
drm/amd/display: Properly clear SCL_*_FILTER_CONTROL on DCE6
drm/amd/display: Add missing DCE6 SCL_HORZ_FILTER_INIT* SRIs
...
|
|
Pull drm fixes from Dave Airlie:
"Some fixes leftover from our fixes branch, just nouveau and vmwgfx:
nouveau:
- Return errno code from TTM move helper
vmwgfx:
- Fix null-ptr access in cursor code
- Fix UAF in validation
- Use correct iterator in validation"
* tag 'drm-fixes-2025-10-11' of https://gitlab.freedesktop.org/drm/kernel:
drm/nouveau: fix bad ret code in nouveau_bo_move_prep
drm/vmwgfx: Fix copy-paste typo in validation
drm/vmwgfx: Fix Use-after-free in validation
drm/vmwgfx: Fix a null-ptr access in the cursor snooper
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull:
nouveau:
- Return errno code from TTM move helper
vmwgfx:
- Fix null-ptr access in cursor code
- Fix UAF in validation
- Use correct iterator in validation
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20251009120004.GA17570@linux.fritz.box
|
|
The function never returns a negative value, and the return value is
assigned to a u64 variable. Use u64 for better type correctness
and clarity.
v2: add assert to catch theoretical negative or zero stolen size. (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20251009230239.2830207-8-shuicheng.lin@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
- Correct Red Hat copyright year from "2002" to "2022".
- Sort the include lines alphabetically.
No functional changes intended.
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20251009230239.2830207-7-shuicheng.lin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
- Correct Red Hat copyright year from "2002" to "2022".
- Rename ttm_sys_mgr_fini() to xe_ttm_sys_mgr_fini() to avoid
confusion with generic TTM helpers.
No functional changes intended.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20251009230239.2830207-6-shuicheng.lin@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Where applicable, enable media sampler power gating. Also, add
it to the powergate_info debugfs.
v2: Remove the sampler powergate status since it is cleared quickly anyway.
v3: Use vcs mask (Rodrigo) and fix the version check for media
v4: Remove extra spaces
v5: Media samplers are independent of vcs mask,
use Media version 1255 (Matt Roper)
Fixes: 38e8c4184ea0 ("drm/xe: Enable Coarse Power Gating")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://lore.kernel.org/r/20251010011047.2047584-1-vinay.belgaumkar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Moving to VRAM will fail if mixed mappings are present or if the page is
already located in VRAM. Atomic faults that require a move to VRAM
currently retry without attempting to evict mixed mappings or locate
existing VRAM mappings.
This patch fixes the issue by attempting to evict mixed mappings or find
existing VRAM pages when a move to VRAM fails during atomic fault
handling.
Fixes: a9ac0fa455b0 ("drm/xe: Strict migration policy for atomic SVM faults")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20251009130629.3531962-1-matthew.brost@intel.com
|
|
The exhaustive eviction accidently changed an error path goto to
a return. Fix this.
Fixes: 59eabff2a352 ("drm/xe: Convert xe_bo_create_pin_map() for exhaustive eviction")
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://lore.kernel.org/r/20250910160939.103473-1-thomas.hellstrom@linux.intel.com
|
|
Replace kmalloc with kmalloc array in drm/gud/gud_pipe.c since the
calculation inside kmalloc is dynamic 'width * height'
Signed-off-by: Mehdi Ben Hadj Khelifa <mehdi.benhadjkhelifa@gmail.com>
Acked-by: Ruben Wauters <rubenru09@aol.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20251007083320.29018-1-mehdi.benhadjkhelifa@gmail.com
|
|
There may be cases in which the BAR0 also needs to move to accommodate
the bigger BAR2. However if it's not released, the BAR2 resize fails.
During the vram probe it can't be released as it's already in use by
xe_mmio for early register access.
Add a new function in xe_vram and let xe_pci call it directly before
even early device probe. This allows the BAR2 to resize in cases BAR0
also needs to move, assuming there aren't other reasons to hold that
move:
[] xe 0000:03:00.0: vgaarb: deactivate vga console
[] xe 0000:03:00.0: [drm] Attempting to resize bar from 8192MiB -> 16384MiB
[] xe 0000:03:00.0: BAR 0 [mem 0x83000000-0x83ffffff 64bit]: releasing
[] xe 0000:03:00.0: BAR 2 [mem 0x4000000000-0x41ffffffff 64bit pref]: releasing
[] pcieport 0000:02:01.0: bridge window [mem 0x4000000000-0x41ffffffff 64bit pref]: releasing
[] pcieport 0000:01:00.0: bridge window [mem 0x4000000000-0x41ffffffff 64bit pref]: releasing
[] pcieport 0000:01:00.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]: assigned
[] pcieport 0000:02:01.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]: assigned
[] xe 0000:03:00.0: BAR 2 [mem 0x4000000000-0x43ffffffff 64bit pref]: assigned
[] xe 0000:03:00.0: BAR 0 [mem 0x83000000-0x83ffffff 64bit]: assigned
[] pcieport 0000:00:01.0: PCI bridge to [bus 01-04]
[] pcieport 0000:00:01.0: bridge window [mem 0x83000000-0x840fffff]
[] pcieport 0000:00:01.0: bridge window [mem 0x4000000000-0x44007fffff 64bit pref]
[] pcieport 0000:01:00.0: PCI bridge to [bus 02-04]
[] pcieport 0000:01:00.0: bridge window [mem 0x83000000-0x840fffff]
[] pcieport 0000:01:00.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]
[] pcieport 0000:02:01.0: PCI bridge to [bus 03]
[] pcieport 0000:02:01.0: bridge window [mem 0x83000000-0x83ffffff]
[] pcieport 0000:02:01.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]
[] xe 0000:03:00.0: [drm] BAR2 resized to 16384M
[] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE e221:0000 dgfx:1 gfx:Xe2_HPG (20.02) ...
For BMG there are additional fix needed in the PCI side, but this
helps getting it to a working resize.
All the rebar logic is more pci-specific than xe-specific and can be
done very early in the probe sequence. In future it would be good to
move it out of xe_vram.c, but this refactor is left for later.
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: stable@vger.kernel.org # 6.12+
Link: https://lore.kernel.org/intel-xe/fafda2a3-fc63-ce97-d22b-803f771a4d19@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250918-xe-pci-rebar-2-v1-2-6c094702a074@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.18-2025-10-09:
amdgpu:
- DC DCE6 fixes
- GPU reset fixes
- Secure diplay messaging cleanup
- MES fix
- GPUVM locking fixes
- PMFW messaging cleanup
- PCI US/DS switch handling fix
- VCN queue reset fix
- DC FPU handling fix
- DCN 3.5 fix
- DC mirroring fix
amdkfd:
- Fix kfd process ref leak
- mmap write lock handling fix
- Fix comments in IOCTL
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20251009162915.981503-1-alexander.deucher@amd.com
|
|
An array of VM binds can potentially evict other buffer objects (BOs)
within the same VM under certain conditions, which may lead to NULL
pointer dereferences later in the bind pipeline. To prevent this, clear
the allow_res_evict flag in the xe_bo_validate call.
v2:
- Invert polarity of no_res_evict (Thomas)
- Add comment in code explaining issue (Thomas)
Cc: stable@vger.kernel.org
Reported-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6268
Fixes: 774b5fa509a9 ("drm/xe: Avoid evicting object of the same vm in none fault mode")
Fixes: 77f2ef3f16f5 ("drm/xe: Lock all gpuva ops during VM bind IOCTL")
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20251009110618.3481870-1-matthew.brost@intel.com
|
|
There is no point in checking the bo fence tiling mode when
we can just check the fb modifier instead.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251003145734.7634-6-ville.syrjala@linux.intel.com
|
|
intel_fb_bo_framebuffer_init() doesn't do anything with the passed
framebuffer. Don't pass it therefore.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251003145734.7634-5-ville.syrjala@linux.intel.com
|
|
Currently we use the implicit modifier fb creation path for fbdev,
but as we never call set_tiling on the bo it will always end up as
linear anyway. The rest of the code (eg. stride alignment) also
assumes that we'll use linear. Just select the linear modifier
explicitly.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251003145734.7634-4-ville.syrjala@linux.intel.com
|
|
intel_frontbuffer_get() is what locks out subsequent set_tiling
changes to the bo. Thus the fence vs. modifier check must be done
after intel_frontbuffer_get(), or else a concurrent set_tiling ioctl
might sneak in and change the fence after the check has been done.
Close the race again. See commit dd689287b977 ("drm/i915: Prevent
concurrent tiling/framebuffer modifications") for the previous
instance.
v2: Reorder intel_user_framebuffer_destroy() to match the unwind (Jani)
Cc: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Fixes: 10690b8a49bc ("drm/i915/display: Add intel_fb_bo_framebuffer_fini")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251003145734.7634-3-ville.syrjala@linux.intel.com
|
|
Currently xe's intel_frontbuffer implementation forgets to
hold a reference on the bo. This makes the entire thing
extremely fragile as the cleanup order now depends on bo
references held by other things
(namely intel_fb_bo_framebuffer_fini()).
Move the bo refcounting to intel_frontbuffer_{get,release}()
so that both i915 and xe do this the same way.
I first tried to fix this by having xe do the refcounting
from its intel_bo_set_frontbuffer() implementation
(which is what i915 does currently), but turns out xe's
drm_gem_object_free() can sleep and thus drm_gem_object_put()
isn't safe to call while we hold fb_tracking.lock.
Fixes: 10690b8a49bc ("drm/i915/display: Add intel_fb_bo_framebuffer_fini")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20251003145734.7634-2-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Drawing from commit d2624d90a0b7 ("drm/panthor: assign unique names to
queues"), give scheduler queues proper names that reflect the function
of their JM slot, so that this will be shown when gathering DRM
scheduler tracepoints.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20251009114313.1374948-1-adrian.larumbe@collabora.com
|
|
The previous timeout of 500us seems to be too small; panning the map in
the Roll20 VTT in Firefox on a KDE/Wayland desktop reliably triggered
timeouts within a few seconds of usage, causing the monitor to freeze
and the following to be printed to dmesg:
[Jul30 13:44] xe 0000:03:00.0: [drm] *ERROR* GT0: Global invalidation timeout
[Jul30 13:48] xe 0000:03:00.0: [drm] *ERROR* [CRTC:82:pipe A] flip_done timed out
I haven't hit a single timeout since increasing it to 1000us even after
several multi-hour testing sessions.
Fixes: 0dd2dd0182bc ("drm/xe: Move DSB l2 flush to a more sensible place")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5710
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20250912223254.147940-1-kenneth@whitecape.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Some functions in drm multiply hdisplay and vdisplay with a third
factor, which can result in a sign extension according to static
analysis due to an implicit s32 promotion. Use a cast to u32 to
prevent this.
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Krzystof Karas <krzysztof.karas@intel.com>
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Andi Shyti <andi.shyti@intel.com>
Link: https://lore.kernel.org/r/20251007153645.90920-2-jonathan.cavitt@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
drm_crtc_accurate_vblank_count takes a spinlock, which we should avoid
in tracepoints and debug functions.
This also prevents taking the spinlock 2x during the critical
section of pipe updates for DSI updates.
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250829131701.15607-2-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
Luca Abeni reported this:
| BUG: scheduling while atomic: kworker/u8:2/15203/0x00000003
| CPU: 1 PID: 15203 Comm: kworker/u8:2 Not tainted 4.19.1-rt3 #10
| Call Trace:
| rt_spin_lock+0x3f/0x50
| gen6_read32+0x45/0x1d0 [i915]
| g4x_get_vblank_counter+0x36/0x40 [i915]
| trace_event_raw_event_i915_pipe_update_start+0x7d/0xf0 [i915]
The tracing events use trace_intel_pipe_update_start() among other events
use functions acquire spinlock_t locks which are transformed into
sleeping locks on PREEMPT_RT. A few trace points use
intel_get_crtc_scanline(), others use ->get_vblank_counter() wich also
might acquire a sleeping locks on PREEMPT_RT.
At the time the arguments are evaluated within trace point, preemption
is disabled and so the locks must not be acquired on PREEMPT_RT.
Based on this I don't see any other way than disable trace points on
PREMPT_RT.
[mlankhorst]
The original patch was insufficient, and since the tracing
infrastructure does not allow for partial disabling of tracepoints.
Completely disable tracing for the entire i915 driver in PREEMPT_RT,
a separate fix for display tracepoints on xe is added to make those
work.
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reported-by: Luca Abeni <lucabe72@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Co-developed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250828090944.101069-1-dev@lankhorst.se
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
|
|
The regulator is optional, skip the setup instead of returning an
error if it is not present
Signed-off-by: Rain Yang <jiyu.yang@nxp.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250928090334.35389-2-jiyu.yang@oss.nxp.com
|
|
Currently the Panthor driver needs the GPU to be powered down
between suspend and resume. If this is not done, then the
MCU_CONTROL register will be preserved as AUTO, which again will
cause a premature FW boot on resume. The FW will go directly into
fatal state in this case.
This case needs to be handled as there is no guarantee that the
GPU will be powered down after the suspend callback on all platforms.
The fix is to call panthor_fw_stop() in "pre-reset" path to ensure
the MCU_CONTROL register is cleared (set DISABLE). This matches
well with the already existing call to panthor_fw_start() from the
"post-reset" path.
Signed-off-by: Ketil Johnsen <ketil.johnsen@arm.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Fixes: 2718d91816ee ("drm/panthor: Add the FW logical block")
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20251008105112.4077015-1-ketil.johnsen@arm.com
|
|
Some VF2GUC actions may take longer to process. Increase default timeout
after received BUSY indication to 2sec to cover all worst case scenarios.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-35-matthew.brost@intel.com
|
|
Rebase the CCS save/restore BB's GGTT addresses during VF post-migration
recovery by setting the software ring tail to zero, the LRC ring head to
zero, and rewriting the jump-to-BB instructions.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-34-matthew.brost@intel.com
|
|
It is possible that the media GT's VF post-migration recovery work item
gets scheduled before the primary GT's work item. Since the media GT
depends on the primary GT's work item to complete CCS restore, if the
media GT's work item is scheduled first, detect this condition and
re-queue the media GT's work item for a later time.
v5:
- Adjust debug message (Tomasz)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tomasz Lis <tomasz.lis@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-33-matthew.brost@intel.com
|
|
VF CCS restore is a primary GT operation on which the media GT depends.
Therefore, it doesn't make much sense to run these operations in
parallel. To address this, point the media GT's ordered work queue to
the primary GT's ordered work queue on platforms that require (PTL VFs)
CCS restore as part of VF post-migration recovery.
v7:
- Remove bool from xe_gt_alloc (Lucas)
v9:
- Fix typo (Lucas)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251008214532.3442967-32-matthew.brost@intel.com
|