| Age | Commit message (Collapse) | Author |
|---|
|
Currently crtc_vblank_start is assumed to be the vblank_start for the fixed
refresh rate case. That value can be different from the variable refresh
rate case whenever always_use_vrr_tg()==false. On icl/tgl it's always
different due to the extra vblank delay, and also on adl+ it could be
different if we were to use an optimized guardband.
So places where crtc_vblank_start is used to compute vblank length needs
change so as to account for cases where vrr is enabled. Specifically
with vrr.enable the effective vblank length is actually guardband.
Add a helper to get the correct vblank length for both vrr and fixed
refresh rate cases. Use this helper where vblank_start is used to
compute the vblank length.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20251016055415.2101347-5-ankit.k.nautiyal@intel.com
|
|
The helper intel_vrr_compute_config_late() practically just computes the
guardband. Rename intel_vrr_compute_config_late() to
intel_vrr_compute_guardband().
Since we are going to compute the guardband and then move the
vblank_start for optmizing guardband move it to
intel_crtc_compute_config() which handles such changes.
v2: Move the function at the last after clocks, pipe_mode etc. are all
set. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20251016055415.2101347-4-ankit.k.nautiyal@intel.com
|
|
Move intel_dpll_crtc_compute_clock in the beginning of the function so that
clocks are set before other things.
This will help in subsequent changes when the vrr guardband computation
is moved to intel_crtc_compute_config().
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20251016055415.2101347-3-ankit.k.nautiyal@intel.com
|
|
Use adjusted_mode->crtc_vsync_start/end instead of
adjusted_mode->vsync_start while computing vrr.vsync_start/end.
For most modes, these are same but for 3D/stereo modes the
crtc_vsync_start is different than vsync_start.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://lore.kernel.org/r/20251016055415.2101347-2-ankit.k.nautiyal@intel.com
|
|
When adding dependencies with drm_sched_job_add_dependency(), that
function consumes the fence reference both on success and failure, so in
the latter case the dma_fence_put() on the error path (xarray failed to
expand) is a double free.
Interestingly this bug appears to have been present ever since
commit ebd5f74255b9 ("drm/sched: Add dependency tracking"), since the code
back then looked like this:
drm_sched_job_add_implicit_dependencies():
...
for (i = 0; i < fence_count; i++) {
ret = drm_sched_job_add_dependency(job, fences[i]);
if (ret)
break;
}
for (; i < fence_count; i++)
dma_fence_put(fences[i]);
Which means for the failing 'i' the dma_fence_put was already a double
free. Possibly there were no users at that time, or the test cases were
insufficient to hit it.
The bug was then only noticed and fixed after
commit 9c2ba265352a ("drm/scheduler: use new iterator in drm_sched_job_add_implicit_dependencies v2")
landed, with its fixup of
commit 4eaf02d6076c ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies").
At that point it was a slightly different flavour of a double free, which
commit 963d0b356935 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder")
noticed and attempted to fix.
But it only moved the double free from happening inside the
drm_sched_job_add_dependency(), when releasing the reference not yet
obtained, to the caller, when releasing the reference already released by
the former in the failure case.
As such it is not easy to identify the right target for the fixes tag so
lets keep it simple and just continue the chain.
While fixing we also improve the comment and explain the reason for taking
the reference and not dropping it.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: 963d0b356935 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/dri-devel/aNFbXq8OeYl3QSdm@stanley.mountain/
Cc: Christian König <christian.koenig@amd.com>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Philipp Stanner <phasta@kernel.org>
Cc: Christian König <ckoenig.leichtzumerken@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20251015084015.6273-1-tvrtko.ursulin@igalia.com
|
|
Separating the panic allocation from framebuffer allocation in commit
729c5f7ffa83 ("drm/{i915,xe}/panic: move framebuffer allocation where it
belongs") failed to deallocate the panic structure anywhere.
The fix is two-fold. First, free the panic structure in
intel_user_framebuffer_destroy() in the general case. Second, move the
panic allocation later to intel_framebuffer_init() to not leak the panic
structure in error paths (if any, now or later) between
intel_framebuffer_alloc() and intel_framebuffer_init().
v2: Rebase
Fixes: 729c5f7ffa83 ("drm/{i915,xe}/panic: move framebuffer allocation where it belongs")
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Reported-by: Michał Grzelak <michal.grzelak@intel.com>
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Michał Grzelak <michal.grzelak@intel.com> # v1
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20251015095135.2183415-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Clock value is missing from C10 hw readout stage. Let's fix this.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20251015125446.3931198-8-mika.kahola@intel.com
|
|
The PHY_C20_VDR_HDMI_RATE registers 7:2 bits are reserved and they are
not specified as a must-be-zero field. Accordingly this reserved field
shouldn't be zeroed; to ensure that use an RMW to update the
PHY_C20_HDMI_RATE field (which is bits 1:0 of the register).
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20251015125446.3931198-7-mika.kahola@intel.com
|
|
Make sure all the DP/HDMI/HDMI-FRL flags are programmed in all the modes
the PLL is configured.
Atm the DP mode flag is not programmed in case the PLL is configured for
HDMI mode for instance. This is incorrect after HW reset, since the DP
mode flag is asserted after reset, hence would need to be cleared for
HDMI, but also incorrect because of the same reason after configuring
the PLL to HDMI mode after it was used in DP mode (for instance on a
DP++ connector).
There is a similar issue with the HDMI-FRL flag, potentially remaining
set when configuring the PLL in DP mode.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20251015125446.3931198-6-mika.kahola@intel.com
|
|
Define PHY_C20_IS_HDMI_FRL, so it can be used instead of the plain bit number.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20251015125446.3931198-5-mika.kahola@intel.com
|
|
flag macro
Move the PHY_C20_CONTEXT_TOGGLE flag's definition under the register containing
the flag and refer to the flag always by its name instead of a plain bit number.
v2: Amend commit log to match what the patch does. (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20251015125446.3931198-4-mika.kahola@intel.com
|
|
Define PHY_C20_IS_DP, so it can be used instead of the plain bit number.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20251015125446.3931198-3-mika.kahola@intel.com
|
|
Rename the PHY_C20_CUSTOM_SERDES / PHY_C20_CUSTOM_SERDES_MASK register
field names to PHY_C20_DP_RATE / PHY_C20_DP_RATE_MASK, and move the
definitions under the actual register containing the fields.
Reviewed-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20251015125446.3931198-2-mika.kahola@intel.com
|
|
This assert can trigger here with non pin_map users that select
LATE_RESTORE, since the vmap is allowed to be NULL given that
save/restore can now use the blitter instead. The check here doesn't
seem to have much value anymore given that we no longer move pinned
memory, so any existing vmap is left well alone, and doesn't need to be
recreated upon restore, so just drop the assert here.
Fixes: 86f69c26113c ("drm/xe: use backup object for pinned save/restore")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6213
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20251010152457.177884-2-matthew.auld@intel.com
(cherry picked from commit a10b4a69c7f8f596d2c5218fbe84430734fab3b2)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
If current bytes exceeds the max copy size, ensure the clamped size
still accounts for the XE_CACHELINE_BYTES alignment, otherwise we
trigger the assert in xe_migrate_vram with the size now being out of
alignment.
Fixes: 8c2d61e0e916 ("drm/xe/migrate: don't overflow max copy size")
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6212
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251010162020.190962-2-matthew.auld@intel.com
(cherry picked from commit 641bcf8731d21b56760e3646a39a65f471e9efd1)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Kunit's generate_params() was recently updated to take an additional
test context parameter. Xe's IP and platform parameter generators were
updated accordingly at the same time, but the new parameter was not
added to the functions' kerneldoc, resulting in the following warnings:
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:78 function parameter 'test' not described in 'xe_pci_fake_data_gen_params'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:254 function parameter 'test' not described in 'xe_pci_graphics_ip_gen_param'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:278 function parameter 'test' not described in 'xe_pci_media_ip_gen_param'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:302 function parameter 'test' not described in 'xe_pci_id_gen_param'
Warning: drivers/gpu/drm/xe/tests/xe_pci.c:390 function parameter 'test' not described in 'xe_pci_live_device_gen_param'
5 warnings as errors
Document the new parameter to eliminate the warnings and make CI happy.
Fixes: b9a214b5f6aa ("kunit: Pass parameterized test context to generate_params()")
Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://lore.kernel.org/r/20251013153014.2362879-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 89e347f8a70165d1e8d88a93d875da7742c902ce)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
If the location madvise() is set to
DRM_XE_PREFERRED_LOC_DEFAULT_SYSTEM, the drm_pagemap in the
SVM gpu fault handler will be set to NULL. However there is nothing
that explicitly migrates the data to system if it is already present
in device memory.
In that case, set the device memory owner to NULL to ensure
data gets properly migrated to system on page-fault.
v2:
- Remove redundant dpagemap assignment (Himal Prasad Ghimiray)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> #v1
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://lore.kernel.org/r/20251010104149.72783-2-thomas.hellstrom@linux.intel.com
Fixes: 10aa5c806030 ("drm/gpusvm, drm/xe: Fix userptr to not allow device private pages")
(cherry picked from commit 2cfcea7a745794f9b8e265a309717ca6ba335fc4)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
Consistently sort bits and bitfields from highest to lowest bits.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Link: https://lore.kernel.org/r/20251014114148.43922-1-marek.vasut@mailbox.org
|
|
Currently, the BiosImage type in vbios code is implemented as a
type-wrapping enum with the sole purpose of implementing a type that is
common to all specific image types. To make this work, macros were used
to overcome limitations of using enums. Ugly match statements were also
required to route methods from the enum type to the specific image type.
Simplify the code by just creating the common BiosImage type in the
iterator, and then converting it to specific image type after. This
works well since all the methods common to different BiosImage are
called only during the iteration and not later. Should we need to call
these common methods later, we can use AsRef and traits, but for now not
doing so gives us a nice ~50 negative line delta versus the existing
code and is a lot simpler.
Also remove the now obsolete BiosImage enum type.
Cc: Benno Lossin <lossin@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20251009004732.2287050-1-joelagnelf@nvidia.com>
|
|
Don't use unwrap() to extract an Option<SGEntry>, instead handle the
error condition gracefully.
Fixes: a841614e607c ("gpu: nova-core: firmware: process and prepare the GSP firmware")
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20250926130623.61316-2-dakr@kernel.org>
|
|
Because nova-core depends on CONFIG_64BIT and a raw DmaAddress is
always a u64, we can remove the now actually useless conversion.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
[acourbot@nvidia.com: reword commit as suggested by John.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Message-ID: <20250926130623.61316-1-dakr@kernel.org>
|
|
In order to support correct initialization of the timer base in the HDMI
QP IP block, setup platform data to include the required reference clock
rate.
While at it, ensure plat_data is zero-initialized in
dw_hdmi_qp_rockchip_bind().
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250903-rk3588-hdmi-cec-v4-5-fa25163c4b08@collabora.com
|
|
In order to support the CEC interface of the DesignWare HDMI QP IP
block, setup platform data to include the required IRQ number.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250903-rk3588-hdmi-cec-v4-4-fa25163c4b08@collabora.com
|
|
The error handling in dw_hdmi_qp_rockchip_bind() is quite inconsistent,
i.e. in some cases the error code is not included in the message, while
in some other cases there is no check for -EPROBE_DEFER.
Since this is part of the probe path, address the aforementioned issues
by switching to dev_err_probe(), which also reduces the code a bit.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250903-rk3588-hdmi-cec-v4-3-fa25163c4b08@collabora.com
|
|
Currently the TIMER_BASE_CONFIG0 register gets initialized to a fixed
value as initially found in vendor driver code supporting the RK3588
SoC. As a matter of fact the value matches the rate of the HDMI TX
reference clock, which is roughly 428.57 MHz.
However, on RK3576 SoC that rate is slightly lower, i.e. 396.00 MHz, and
the incorrect register configuration breaks CEC functionality.
Set the timer base according to the actual reference clock rate that
shall be provided by the platform driver. Otherwise fallback to the
vendor default.
While at it, also drop the unnecessary empty lines in
dw_hdmi_qp_init_hw().
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250903-rk3588-hdmi-cec-v4-2-fa25163c4b08@collabora.com
|
|
Add support for the CEC interface of the Synopsys DesignWare HDMI QP TX
controller.
This is based on the downstream implementation, but rewritten on top of
the CEC helpers added recently to the DRM HDMI connector framework.
Also note struct dw_hdmi_qp_plat_data has been extended to include the
CEC IRQ number to be provided by the platform driver.
Co-developed-by: Algea Cao <algea.cao@rock-chips.com>
Signed-off-by: Algea Cao <algea.cao@rock-chips.com>
Co-developed-by: Derek Foreman <derek.foreman@collabora.com>
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250903-rk3588-hdmi-cec-v4-1-fa25163c4b08@collabora.com
|
|
This assert can trigger here with non pin_map users that select
LATE_RESTORE, since the vmap is allowed to be NULL given that
save/restore can now use the blitter instead. The check here doesn't
seem to have much value anymore given that we no longer move pinned
memory, so any existing vmap is left well alone, and doesn't need to be
recreated upon restore, so just drop the assert here.
Fixes: 86f69c26113c ("drm/xe: use backup object for pinned save/restore")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6213
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20251010152457.177884-2-matthew.auld@intel.com
|
|
If current bytes exceeds the max copy size, ensure the clamped size
still accounts for the XE_CACHELINE_BYTES alignment, otherwise we
trigger the assert in xe_migrate_vram with the size now being out of
alignment.
Fixes: 8c2d61e0e916 ("drm/xe/migrate: don't overflow max copy size")
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6212
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20251010162020.190962-2-matthew.auld@intel.com
|
|
Using intel_psr_exit in frontbuffer flush on older platforms seems to be
causing problems.
Sending single full frame update using intel_psr_force_update is anyways
more optimal compared to psr deactivate/activate -> move back to this
approach on PSR1, PSR HW tracking and Panel Replay full frame update and
use deactivate/activate only on LunarLake and only when selective fetch is
enabled.
Tested-by: Lemen <lemen@lemen.xyz>
Tested-by: Koos Vriezen <koos.vriezen@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14946
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250922102725.2752742-1-jouni.hogander@intel.com
(cherry picked from commit 924adb0bbdd8fef25fd229c76e3f602c3e8752ee)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
wa_22014263786 is not applicable to the BMG and hence exclude it
from the wa.
v2: Limit this wa to display verion 11 to 14, drop DG2 from the
exclusion list, use intel_display_wa (Lucas)
v3: simplify the wa handling loop (Jani)
Description of wa moved to place where wa is applied (Ville)
v4: drop the platforms line from wa comments (Lucas)
Bspec: 74212, 66624
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20251007214317.875781-1-vinod.govindapillai@intel.com
|
|
Use a vblank timer to simulate the vblank interrupt. The DRM vblank
helpers provide an implementation on top of Linux' hrtimer. Qxl
enables and disables the timer as part of the CRTC. The atomic_flush
callback sets up the event. Like vblank interrupts, the vblank timer
fires at the rate of the display refresh.
Most userspace limits its page flip rate according to the DRM vblank
event. Qxl's virtual hardware does not provide vblank interrupts, so
DRM sends each event ASAP. With the fast access times of virtual display
memory, the event rate is much higher than the display mode's refresh
rate; creating the next page flip almost immediately. This leads to
excessive CPU overhead from even small display updates, such as moving
the mouse pointer.
This problem affects qxl and all other virtual displays. See [1] for
a discussion in the context of hypervdrm.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/dri-devel/SN6PR02MB415702B00D6D52B0EE962C98D46CA@SN6PR02MB4157.namprd02.prod.outlook.com/ # [1]
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://lore.kernel.org/r/20251008122911.231674-1-tzimmermann@suse.de
|
|
Use a vblank timer to simulate the vblank interrupt. The DRM vblank
helpers provide an implementation on top of Linux' hrtimer. Cirrus-qemu
enables and disables the timer as part of the CRTC. The atomic_flush
callback sets up the event. Like vblank interrupts, the vblank timer
fires at the rate of the display refresh.
Most userspace limits its page flip rate according to the DRM vblank
event. Cirrus-qemu' virtual hardware does not provide vblank interrupts,
so DRM sends each event ASAP. With the fast access times of virtual display
memory, the event rate is much higher than the display mode's refresh
rate; creating the next page flip almost immediately. This leads to
excessive CPU overhead from even small display updates, such as moving
the mouse pointer.
This problem affects cirrus-qemu and all other virtual displays. See [1]
for a discussion in the context of hypervdrm.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/dri-devel/SN6PR02MB415702B00D6D52B0EE962C98D46CA@SN6PR02MB4157.namprd02.prod.outlook.com/ # [1]
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://lore.kernel.org/r/20251008121450.227997-1-tzimmermann@suse.de
|
|
Use a vblank timer to simulate the vblank interrupt. The DRM vblank
helpers provide an implementation on top of Linux' hrtimer. Bochs
enables and disables the timer as part of the CRTC. The atomic_flush
callback sets up the event. Like vblank interrupts, the vblank timer
fires at the rate of the display refresh.
Most userspace limits its page flip rate according to the DRM vblank
event. Bochs' virtual hardware does not provide vblank interrupts, so
DRM sends each event ASAP. With the fast access time of virtual display
memory, the event rate is much higher than the display mode's refresh
rate; creating the next page flip almost immediately. This leads to
excessive CPU overhead from even small display updates, such as moving
the mouse pointer.
This problem affects bochs and all other virtual displays. See [1] for
a discussion in the context of hypervdrm.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/dri-devel/SN6PR02MB415702B00D6D52B0EE962C98D46CA@SN6PR02MB4157.namprd02.prod.outlook.com/ # [1]
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://lore.kernel.org/r/20251008093931.19138-1-tzimmermann@suse.de
|
|
Add the add4 flag to struct ast_device_quirks and set it on AST2600.
Replaces a call to IS_AST_GEN7() in ast_set_crtc_reg().
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>>
Link: https://lore.kernel.org/r/20251007150343.273718-6-tzimmermann@suse.de
|
|
Add a precatch flag in struct ast_device_info and set it on AST2500
and AST2600. Remove calls to IS_AST_GENn() from ast_set_crtc_reg().
Also fix the coding style in several places.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20251007150343.273718-5-tzimmermann@suse.de
|
|
Store each hardware's CRTC memory threshold in the specific instance
of struct ast_device_quirks. Removes the calls to IS_AST_GENn() from
ast_set_crtthd_reg().
The values stored in the registers appear to be plain limits. Hence
write them in the driver in decimal format instead of hexadecimal.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20251007150343.273718-4-tzimmermann@suse.de
|
|
Define struct ast_device_quirks and add an instance for each hardware
generation. The type will provide information about per-gen constants
and oddities.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>>
Link: https://lore.kernel.org/r/20251007150343.273718-3-tzimmermann@suse.de
|
|
Init the new field dclk_table in struct ast_device to the per-gen
table of DRAM clock parameters. Use the field during modesetting.
The table is static, so a setup is only required once. Removes the
call to IS_AST_GEN() from the atomic commit's code path.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20251007150343.273718-2-tzimmermann@suse.de
|
|
The IS_LUNARLAKE(), IS_BATTLEMAGE(), and IS_PANTHERLAKE() macros were
added for compatibility with the xe driver, for display needs, even
though i915 does not support the platforms in question. Display has
since moved away from the macros, and they are no longer needed. Remove.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20251010080021.1087315-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Blank the display by disabling sync pulses with VGACR17<7>. Unblank
by reenabling them. This VGA setting should be supported by all Aspeed
hardware.
Ast currently blanks via sync-off bits in VGACRB6. Not all BMCs handle
VGACRB6 correctly. After disabling sync during a reboot, some BMCs do
not reenable it after the soft reset. The display output remains dark.
When the display is off during boot, some BMCs set the sync-off bits in
VGACRB6, so the display remains dark. Observed with Blackbird AST2500
BMCs. Clearing the sync-off bits unconditionally fixes these issues.
Also do not modify VGASR1's SD bit for blanking, as it only disables GPU
access to video memory.
v2:
- init vgacrb6 correctly (Jocelyn)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: ce3d99c83495 ("drm: Call drm_atomic_helper_shutdown() at shutdown time for misc drivers")
Tested-by: Nick Bowler <nbowler@draconx.ca>
Reported-by: Nick Bowler <nbowler@draconx.ca>
Closes: https://lore.kernel.org/dri-devel/wpwd7rit6t4mnu6kdqbtsnk5bhftgslio6e2jgkz6kgw6cuvvr@xbfswsczfqsi/
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.7+
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/20251014084743.18242-1-tzimmermann@suse.de
|
|
SR-IOV operation relies on the primary GT's GuC to operate (in both PF
and VF mode). Don't enable the .has_sriov flag if the primary-GT was
disabled by configfs.
v2:
- Move handling to xe_info_init(). (Michal)
v3:
- Just update the .has_sriov flag in xe_info_init_early(). (Michal)
v4:
- Drop unnecessary comment. (Michal)
- Flip condition order for consistency with other checks. (Michal)
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-48-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Preventing the driver from initializing GTs of specific type(s) can be
useful for debugging and early hardware bringup. Add a configfs
attribute to allow this kind of control for debugging.
With today's platforms and software design, this configuration setting
is only effective for disabling the media GT since the driver currently
requires that there always be a primary GT to probe the device. However
this might change in the future --- in theory it should be possible
(with some additional driver work) to allow an igpu device to come up
with only the media GT and no primary GT. Or to allow an igpu device to
come up with no GTs at all (for display-only usage). A primary GT will
likely always be required on dgpu platforms because we rely on the BCS
engines inside the primary GT for various vram operations.
v2:
- Expand/clarify kerneldoc for configfs attribute. (Gustavo)
- Tighten type usage in gt_types[] structure. (Gustavo)
- Adjust string parsing/name matching to match exact GT names and not
accept partial names. (Gustavo)
v3:
- Switch to scope-based cleanup in gt_types_allowed_store() to fix a
leak if the device is already bound. (Gustavo)
- Switch configfs lookup interface to two boolean functions that
specify whether primary/media are supported rather than one function
that returns a mask. This is simpler to use and understand.
v4:
- Rename xe_configfs_*_gt_supported to xe_configfs_*_gt_allowed for
consistency with configfs interface and other functions. (Gustavo)
- Simplify boolean check in xe_configfs_*_gt_allowed. (Michal)
- Use xe_info() for message printing. (Michal)
- Use guard() instead of scoped_guard(). (Michal)
- Make new functions take 'struct pci_dev' for consistency with other
configfs lookup functions. (Michal)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-47-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
xe_info_init() is getting a bit long and hard to follow. Break the
allocation and basic initialization of the xe_gt structures out to their
own functions.
v2:
- Rename new functions from init_* to alloc_*. (Gustavo)
- Move early NULL return of media GT before allocation. (Gustavo)
Cc: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-46-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
If the primary is GT is disabled via configfs, we can't read the GT
registers that would tell us whether the BIOS has disabled FlatCCS on a
platform that would otherwise have it; we'll just proceed as if the
FlatCCS is still enabled. This is similar to the situation seen by
SRIOV VFs and doesn't cause any functional problems since the hardware
will simply drop writes to the CCS region and reads will always come
back as 0 (indicating uncompressed data). We'll simply miss out on the
chance to avoid some unnecessary overhead during BO creation and
migration.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-45-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
If the primary GT is disabled, skip the check for this workaround (which
only applies to dgpu platforms where the primary GT cannot be NULL).
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-44-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Wa_22014953428 was incorrectly labelled with a release-specific ID
number rather than the cross-platform lineage number; fix that.
Also check that the GT is not NULL before trying to lookup the
workaround in it. Since this workaround only applies to DG2 discrete
GPUs (where the primary GT cannot be disabled), no coverage is lost.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-43-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Don't try to lookup Wa_14018094691 on a NULL GT when the primary GT is
disabled. Since this whole workaround centers around mid-thread
preemption behavior, the workaround isn't relevant if the primary GT
(where the engines that can do MTP live) is disabled.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-42-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
FUNC matches in RTP only pass the GT and hwe, preventing them from being
used effectively in device workarounds. Add an additional xe_device
parameter so that we can use them in device workarounds where a GT may
not be available.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-41-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
When Wa_22010954014 and Wa_14022085890 were first implemented, we didn't
have a device workaround infrastructure so we hacked them into the GT
workaround list. Now that we have proper device workaround support,
move them to the proper place. Note that Wa_14022085890 specifically
applies to BMG-G21 platforms, so this requires defining a BMG
subplatform to capture the correct subset of device IDs.
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-40-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
If the primary GT is disabled via configfs, we shouldn't try to access
it to lookup BCS/CCS engine masks. For the purposes of IRQ reset (which
masks & disables interrupts in an sgunit register), assume all possible
instances are present.
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Link: https://lore.kernel.org/r/20251013200944.2499947-39-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
