summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2026-04-18drm/i915/gt: fix refcount underflow in intel_engine_park_heartbeatSebastian Brzezinka
commit 4c71fd099513bfa8acab529b626e1f0097b76061 upstream. A use-after-free / refcount underflow is possible when the heartbeat worker and intel_engine_park_heartbeat() race to release the same engine->heartbeat.systole request. The heartbeat worker reads engine->heartbeat.systole and calls i915_request_put() on it when the request is complete, but clears the pointer in a separate, non-atomic step. Concurrently, a request retirement on another CPU can drop the engine wakeref to zero, triggering __engine_park() -> intel_engine_park_heartbeat(). If the heartbeat timer is pending at that point, cancel_delayed_work() returns true and intel_engine_park_heartbeat() reads the stale non-NULL systole pointer and calls i915_request_put() on it again, causing a refcount underflow: ``` <4> [487.221889] Workqueue: i915-unordered engine_retire [i915] <4> [487.222640] RIP: 0010:refcount_warn_saturate+0x68/0xb0 ... <4> [487.222707] Call Trace: <4> [487.222711] <TASK> <4> [487.222716] intel_engine_park_heartbeat.part.0+0x6f/0x80 [i915] <4> [487.223115] intel_engine_park_heartbeat+0x25/0x40 [i915] <4> [487.223566] __engine_park+0xb9/0x650 [i915] <4> [487.223973] ____intel_wakeref_put_last+0x2e/0xb0 [i915] <4> [487.224408] __intel_wakeref_put_last+0x72/0x90 [i915] <4> [487.224797] intel_context_exit_engine+0x7c/0x80 [i915] <4> [487.225238] intel_context_exit+0xf1/0x1b0 [i915] <4> [487.225695] i915_request_retire.part.0+0x1b9/0x530 [i915] <4> [487.226178] i915_request_retire+0x1c/0x40 [i915] <4> [487.226625] engine_retire+0x122/0x180 [i915] <4> [487.227037] process_one_work+0x239/0x760 <4> [487.227060] worker_thread+0x200/0x3f0 <4> [487.227068] ? __pfx_worker_thread+0x10/0x10 <4> [487.227075] kthread+0x10d/0x150 <4> [487.227083] ? __pfx_kthread+0x10/0x10 <4> [487.227092] ret_from_fork+0x3d4/0x480 <4> [487.227099] ? __pfx_kthread+0x10/0x10 <4> [487.227107] ret_from_fork_asm+0x1a/0x30 <4> [487.227141] </TASK> ``` Fix this by replacing the non-atomic pointer read + separate clear with xchg() in both racing paths. xchg() is a single indivisible hardware instruction that atomically reads the old pointer and writes NULL. This guarantees only one of the two concurrent callers obtains the non-NULL pointer and performs the put, the other gets NULL and skips it. Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/15880 Fixes: 058179e72e09 ("drm/i915/gt: Replace hangcheck by heartbeats") Cc: <stable@vger.kernel.org> # v5.5+ Signed-off-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com> Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://lore.kernel.org/r/d4c1c14255688dd07cc8044973c4f032a8d1559e.1775038106.git.sebastian.brzezinka@intel.com (cherry picked from commit 13238dc0ee4f9ab8dafa2cca7295736191ae2f42) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18drm/ast: dp501: Fix initialization of SCU2CThomas Zimmermann
commit 2f42c1a6161646cbd29b443459fd635d29eda634 upstream. Ast's DP501 initialization reads the register SCU2C at offset 0x1202c and tries to set it to source data from VGA. But writes the update to offset 0x0, with unknown results. Write the result to SCU instead. The bug only happens in ast_init_analog(). There's similar code in ast_init_dvo(), which works correctly. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 83c6620bae3f ("drm/ast: initial DP501 support (v0.2)") Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Jocelyn Falempe <jfalempe@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v3.16+ Link: https://patch.msgid.link/20260327133532.79696-2-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18drm/ioc32: stop speculation on the drm_compat_ioctl pathGreg Kroah-Hartman
commit f8995c2df519f382525ca4bc90553ad2ec611067 upstream. The drm compat ioctl path takes a user controlled pointer, and then dereferences it into a table of function pointers, the signature method of spectre problems. Fix this up by calling array_index_nospec() on the index to the function pointer list. Fixes: 505b5240329b ("drm/ioctl: Fix Spectre v1 vulnerabilities") Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: David Airlie <airlied@gmail.com> Cc: Simona Vetter <simona@ffwll.ch> Cc: stable <stable@kernel.org> Assisted-by: gkh_clanker_2000 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <mripard@kernel.org> Reviewed-by: Simona Vetter <simona@ffwll.ch> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patch.msgid.link/2026032451-playing-rummage-8fa2@gregkh Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18drm/i915/gmbus: fix spurious timeout on 512-byte burst readsSamasth Norway Ananda
[ Upstream commit 08441f10f4dc09fdeb64529953ac308abc79dd38 ] When reading exactly 512 bytes with burst read enabled, the extra_byte_added path breaks out of the inner do-while without decrementing len. The outer while(len) then re-enters and gmbus_wait() times out since all data has been delivered. Decrement len before the break so the outer loop terminates correctly. Fixes: d5dc0f43f268 ("drm/i915/gmbus: Enable burst read") Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patch.msgid.link/20260316231920.135438-2-samasth.norway.ananda@oracle.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 4ab0f09ee73fc853d00466682635f67c531f909c) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-04-18drm/i915/gt: Check set_default_submission() before deferencingRahul Bukte
[ Upstream commit 0162ab3220bac870e43e229e6e3024d1a21c3f26 ] When the i915 driver firmware binaries are not present, the set_default_submission pointer is not set. This pointer is dereferenced during suspend anyways. Add a check to make sure it is set before dereferencing. [ 23.289926] PM: suspend entry (deep) [ 23.293558] Filesystems sync: 0.000 seconds [ 23.298010] Freezing user space processes [ 23.302771] Freezing user space processes completed (elapsed 0.000 seconds) [ 23.309766] OOM killer disabled. [ 23.313027] Freezing remaining freezable tasks [ 23.318540] Freezing remaining freezable tasks completed (elapsed 0.001 seconds) [ 23.342038] serial 00:05: disabled [ 23.345719] serial 00:02: disabled [ 23.349342] serial 00:01: disabled [ 23.353782] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 23.358993] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 23.361635] ata1.00: Entering standby power mode [ 23.368863] ata2.00: Entering standby power mode [ 23.445187] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 23.452194] #PF: supervisor instruction fetch in kernel mode [ 23.457896] #PF: error_code(0x0010) - not-present page [ 23.463065] PGD 0 P4D 0 [ 23.465640] Oops: Oops: 0010 [#1] SMP NOPTI [ 23.469869] CPU: 8 UID: 0 PID: 211 Comm: kworker/u48:18 Tainted: G S W 6.19.0-rc4-00020-gf0b9d8eb98df #10 PREEMPT(voluntary) [ 23.482512] Tainted: [S]=CPU_OUT_OF_SPEC, [W]=WARN [ 23.496511] Workqueue: async async_run_entry_fn [ 23.501087] RIP: 0010:0x0 [ 23.503755] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 23.510324] RSP: 0018:ffffb4a60065fca8 EFLAGS: 00010246 [ 23.515592] RAX: 0000000000000000 RBX: ffff9f428290e000 RCX: 000000000000000f [ 23.522765] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff9f428290e000 [ 23.529937] RBP: ffff9f4282907070 R08: ffff9f4281130428 R09: 00000000ffffffff [ 23.537111] R10: 0000000000000000 R11: 0000000000000001 R12: ffff9f42829070f8 [ 23.544284] R13: ffff9f4282906028 R14: ffff9f4282900000 R15: ffff9f4282906b68 [ 23.551457] FS: 0000000000000000(0000) GS:ffff9f466b2cf000(0000) knlGS:0000000000000000 [ 23.559588] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 23.565365] CR2: ffffffffffffffd6 CR3: 000000031c230001 CR4: 0000000000f70ef0 [ 23.572539] PKRU: 55555554 [ 23.575281] Call Trace: [ 23.577770] <TASK> [ 23.579905] intel_engines_reset_default_submission+0x42/0x60 [ 23.585695] __intel_gt_unset_wedged+0x191/0x200 [ 23.590360] intel_gt_unset_wedged+0x20/0x40 [ 23.594675] gt_sanitize+0x15e/0x170 [ 23.598290] i915_gem_suspend_late+0x6b/0x180 [ 23.602692] i915_drm_suspend_late+0x35/0xf0 [ 23.607008] ? __pfx_pci_pm_suspend_late+0x10/0x10 [ 23.611843] dpm_run_callback+0x78/0x1c0 [ 23.615817] device_suspend_late+0xde/0x2e0 [ 23.620037] async_suspend_late+0x18/0x30 [ 23.624082] async_run_entry_fn+0x25/0xa0 [ 23.628129] process_one_work+0x15b/0x380 [ 23.632182] worker_thread+0x2a5/0x3c0 [ 23.635973] ? __pfx_worker_thread+0x10/0x10 [ 23.640279] kthread+0xf6/0x1f0 [ 23.643464] ? __pfx_kthread+0x10/0x10 [ 23.647263] ? __pfx_kthread+0x10/0x10 [ 23.651045] ret_from_fork+0x131/0x190 [ 23.654837] ? __pfx_kthread+0x10/0x10 [ 23.658634] ret_from_fork_asm+0x1a/0x30 [ 23.662597] </TASK> [ 23.664826] Modules linked in: [ 23.667914] CR2: 0000000000000000 [ 23.671271] ------------[ cut here ]------------ Signed-off-by: Rahul Bukte <rahul.bukte@sony.com> Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com> Link: https://patch.msgid.link/20260203044839.1555147-1-suraj.kandpal@intel.com (cherry picked from commit daa199abc3d3d1740c9e3a2c3e9216ae5b447cad) Fixes: ff44ad51ebf8 ("drm/i915: Move engine->submit_request selection to a vfunc") Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-04-18drm/amd/display: Use GFP_ATOMIC in dc_create_stream_for_sinkNatalie Vock
[ Upstream commit 28dfe4317541e57fe52f9a290394cd29c348228b ] This can be called while preemption is disabled, for example by dcn32_internal_validate_bw which is called with the FPU active. Fixes "BUG: scheduling while atomic" messages I encounter on my Navi31 machine. Signed-off-by: Natalie Vock <natalie.vock@gmx.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit b42dae2ebc5c84a68de63ec4ffdfec49362d53f1) Cc: stable@vger.kernel.org [ Context ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18drm/exynos: vidi: use ctx->lock to protect struct vidi_context member ↵Jeongjun Park
variables related to memory alloc/free commit 52b330799e2d6f825ae2bb74662ec1b10eb954bb upstream. Exynos Virtual Display driver performs memory alloc/free operations without lock protection, which easily causes concurrency problem. For example, use-after-free can occur in race scenario like this: ``` CPU0 CPU1 CPU2 ---- ---- ---- vidi_connection_ioctl() if (vidi->connection) // true drm_edid = drm_edid_alloc(); // alloc drm_edid ... ctx->raw_edid = drm_edid; ... drm_mode_getconnector() drm_helper_probe_single_connector_modes() vidi_get_modes() if (ctx->raw_edid) // true drm_edid_dup(ctx->raw_edid); if (!drm_edid) // false ... vidi_connection_ioctl() if (vidi->connection) // false drm_edid_free(ctx->raw_edid); // free drm_edid ... drm_edid_alloc(drm_edid->edid) kmemdup(edid); // UAF!! ... ``` To prevent these vulns, at least in vidi_context, member variables related to memory alloc/free should be protected with ctx->lock. Cc: <stable@vger.kernel.org> Signed-off-by: Jeongjun Park <aha310510@gmail.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18drm/exynos: vidi: fix to avoid directly dereferencing user pointerJeongjun Park
commit d4c98c077c7fb2dfdece7d605e694b5ea2665085 upstream. In vidi_connection_ioctl(), vidi->edid(user pointer) is directly dereferenced in the kernel. This allows arbitrary kernel memory access from the user space, so instead of directly accessing the user pointer in the kernel, we should modify it to copy edid to kernel memory using copy_from_user() and use it. Cc: <stable@vger.kernel.org> Signed-off-by: Jeongjun Park <aha310510@gmail.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()Jeongjun Park
commit d3968a0d85b211e197f2f4f06268a7031079e0d0 upstream. vidi_connection_ioctl() retrieves the driver_data from drm_dev->dev to obtain a struct vidi_context pointer. However, drm_dev->dev is the exynos-drm master device, and the driver_data contained therein is not the vidi component device, but a completely different device. This can lead to various bugs, ranging from null pointer dereferences and garbage value accesses to, in unlucky cases, out-of-bounds errors, use-after-free errors, and more. To resolve this issue, we need to store/delete the vidi device pointer in exynos_drm_private->vidi_dev during bind/unbind, and then read this exynos_drm_private->vidi_dev within ioctl() to obtain the correct struct vidi_context pointer. Cc: <stable@vger.kernel.org> Signed-off-by: Jeongjun Park <aha310510@gmail.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18drm/radeon: apply state adjust rules to some additional HAINAN vairantsAlex Deucher
commit 86650ee2241ff84207eaa298ab318533f3c21a38 upstream. They need a similar workaround. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1839 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 87327658c848f56eac166cb382b57b83bf06c5ac) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18drm/amdgpu: Fix use-after-free race in VM acquireAlysa Liu
commit 2c1030f2e84885cc58bffef6af67d5b9d2e7098f upstream. Replace non-atomic vm->process_info assignment with cmpxchg() to prevent race when parent/child processes sharing a drm_file both try to acquire the same VM after fork(). Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alysa Liu <Alysa.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit c7c573275ec20db05be769288a3e3bb2250ec618) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18nouveau/dpcd: return EBUSY for aux xfer if the device is asleepDave Airlie
commit 8f3c6f08ababad2e3bdd239728cf66a9949446b4 upstream. If we have runtime suspended, and userspace wants to use /dev/drm_dp_* then just tell it the device is busy instead of crashing in the GSP code. WARNING: CPU: 2 PID: 565741 at drivers/gpu/drm/nouveau/nvkm/subdev/gsp/rm/r535/rpc.c:164 r535_gsp_msgq_wait+0x9a/0xb0 [nouveau] CPU: 2 UID: 0 PID: 565741 Comm: fwupd Not tainted 6.18.10-200.fc43.x86_64 #1 PREEMPT(lazy) Hardware name: LENOVO 20QTS0PQ00/20QTS0PQ00, BIOS N2OET65W (1.52 ) 08/05/2024 RIP: 0010:r535_gsp_msgq_wait+0x9a/0xb0 [nouveau] This is a simple fix to get backported. We should probably engineer a proper power domain solution to wake up devices and keep them awake while fw updates are happening. Cc: stable@vger.kernel.org Fixes: 8894f4919bc4 ("drm/nouveau: register a drm_dp_aux channel for each dp connector") Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patch.msgid.link/20260224031750.791621-1-airlied@gmail.com Signed-off-by: Danilo Krummrich <dakr@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-04-18drm/tegra: dsi: fix device leak on probeJohan Hovold
[ Upstream commit bfef062695570842cf96358f2f46f4c6642c6689 ] Make sure to drop the reference taken when looking up the companion (ganged) device and its driver data during probe(). Note that holding a reference to a device does not prevent its driver data from going away so there is no point in keeping the reference. Fixes: e94236cde4d5 ("drm/tegra: dsi: Add ganged mode support") Fixes: 221e3638feb8 ("drm/tegra: Fix reference leak in tegra_dsi_ganged_probe") Cc: stable@vger.kernel.org # 3.19: 221e3638feb8 Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patch.msgid.link/20251121164201.13188-1-johan@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04drm/amdgpu: keep vga memory on MacBooks with switchable graphicsAlex Deucher
[ Upstream commit 096bb75e13cc508d3915b7604e356bcb12b17766 ] On Intel MacBookPros with switchable graphics, when the iGPU is enabled, the address of VRAM gets put at 0 in the dGPU's virtual address space. This is non-standard and seems to cause issues with the cursor if it ends up at 0. We have the framework to reserve memory at 0 in the address space, so enable it here if the vram start address is 0. Reviewed-and-tested-by: Mario Kleiner <mario.kleiner.de@gmail.com> Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4302 Cc: stable@vger.kernel.org Cc: Mario Kleiner <mario.kleiner.de@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04drm/amdkfd: Fix out-of-bounds write in kfd_event_page_set()Sunday Clement
[ Upstream commit 8a70a26c9f34baea6c3199a9862ddaff4554a96d ] The kfd_event_page_set() function writes KFD_SIGNAL_EVENT_LIMIT * 8 bytes via memset without checking the buffer size parameter. This allows unprivileged userspace to trigger an out-of bounds kernel memory write by passing a small buffer, leading to potential privilege escalation. Signed-off-by: Sunday Clement <Sunday.Clement@amd.com> Reviewed-by: Alexander Deucher <Alexander.Deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04drm/radeon: Add HAINAN clock adjustmentdecce6
[ Upstream commit 908d318f23d6b5d625bea093c5fc056238cdb7ff ] This patch limits the clock speeds of the AMD Radeon R5 M420 GPU from 850/1000MHz (core/memory) to 800/950 MHz, making it work stably. This patch is for radeon. Signed-off-by: decce6 <decce6@proton.me> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04drm/amdgpu: Add HAINAN clock adjustmentdecce6
[ Upstream commit 49fe2c57bdc0acff9d2551ae337270b6fd8119d9 ] This patch limits the clock speeds of the AMD Radeon R5 M420 GPU from 850/1000MHz (core/memory) to 800/950 MHz, making it work stably. This patch is for amdgpu. Signed-off-by: decce6 <decce6@proton.me> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04drm/amdgpu: Adjust usleep_range in fence waitCe Sun
[ Upstream commit 3ee1c72606bd2842f0f377fd4b118362af0323ae ] Tune the sleep interval in the PSP fence wait loop from 10-100us to 60-100us.This adjustment results in an overall wait window of 1.2s (60us * 20000 iterations) to 2 seconds (100us * 20000 iterations), which guarantees that we can retrieve the correct fence value Signed-off-by: Ce Sun <cesun102@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04drm/amd/display: Avoid updating surface with the same surface under MPOWayne Lin
[ Upstream commit 1a38ded4bc8ac09fd029ec656b1e2c98cc0d238c ] [Why & How] Although it's dummy updates of surface update for committing stream updates, we should not have dummy_updates[j].surface all indicating to the same surface under multiple surfaces case. Otherwise, copy_surface_update_to_plane() in update_planes_and_stream_state() will update to the same surface only. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Signed-off-by: Tom Chung <chiahsuan.chung@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04drm/atmel-hlcdc: fix use-after-free of drm_crtc_commit after releaseLudovic Desroches
[ Upstream commit bc847787233277a337788568e90a6ee1557595eb ] The atmel_hlcdc_plane_atomic_duplicate_state() callback was copying the atmel_hlcdc_plane state structure without properly duplicating the drm_plane_state. In particular, state->commit remained set to the old state commit, which can lead to a use-after-free in the next drm_atomic_commit() call. Fix this by calling __drm_atomic_helper_duplicate_plane_state(), which correctly clones the base drm_plane_state (including the ->commit pointer). It has been seen when closing and re-opening the device node while another DRM client (e.g. fbdev) is still attached: ============================================================================= BUG kmalloc-64 (Not tainted): Poison overwritten ----------------------------------------------------------------------------- 0xc611b344-0xc611b344 @offset=836. First byte 0x6a instead of 0x6b FIX kmalloc-64: Restoring Poison 0xc611b344-0xc611b344=0x6b Allocated in drm_atomic_helper_setup_commit+0x1e8/0x7bc age=178 cpu=0 pid=29 drm_atomic_helper_setup_commit+0x1e8/0x7bc drm_atomic_helper_commit+0x3c/0x15c drm_atomic_commit+0xc0/0xf4 drm_framebuffer_remove+0x4cc/0x5a8 drm_mode_rmfb_work_fn+0x6c/0x80 process_one_work+0x12c/0x2cc worker_thread+0x2a8/0x400 kthread+0xc0/0xdc ret_from_fork+0x14/0x28 Freed in drm_atomic_helper_commit_hw_done+0x100/0x150 age=8 cpu=0 pid=169 drm_atomic_helper_commit_hw_done+0x100/0x150 drm_atomic_helper_commit_tail+0x64/0x8c commit_tail+0x168/0x18c drm_atomic_helper_commit+0x138/0x15c drm_atomic_commit+0xc0/0xf4 drm_atomic_helper_set_config+0x84/0xb8 drm_mode_setcrtc+0x32c/0x810 drm_ioctl+0x20c/0x488 sys_ioctl+0x14c/0xc20 ret_fast_syscall+0x0/0x54 Slab 0xef8bc360 objects=21 used=16 fp=0xc611b7c0 flags=0x200(workingset|zone=0) Object 0xc611b340 @offset=832 fp=0xc611b7c0 Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com> Link: https://patch.msgid.link/20251024-lcd_fixes_mainlining-v1-2-79b615130dc3@microchip.com Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04drm/atmel-hlcdc: don't reject the commit if the src rect has fractional partsLudovic Desroches
[ Upstream commit 06682206e2a1883354ed758c09efeb51f435adbd ] Don’t reject the commit when the source rectangle has fractional parts. This can occur due to scaling: drm_atomic_helper_check_plane_state() calls drm_rect_clip_scaled(), which may introduce fractional parts while computing the clipped source rectangle. This does not imply the commit is invalid, so we should accept it instead of discarding it. Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com> Link: https://patch.msgid.link/20251120-lcd_scaling_fix-v1-1-5ffc98557923@microchip.com Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04drm/atmel-hlcdc: fix memory leak from the atomic_destroy_state callbackLudovic Desroches
[ Upstream commit f12352471061df83a36edf54bbb16284793284e4 ] After several commits, the slab memory increases. Some drm_crtc_commit objects are not freed. The atomic_destroy_state callback only put the framebuffer. Use the __drm_atomic_helper_plane_destroy_state() function to put all the objects that are no longer needed. It has been seen after hours of usage of a graphics application or using kmemleak: unreferenced object 0xc63a6580 (size 64): comm "egt_basic", pid 171, jiffies 4294940784 hex dump (first 32 bytes): 40 50 34 c5 01 00 00 00 ff ff ff ff 8c 65 3a c6 @P4..........e:. 8c 65 3a c6 ff ff ff ff 98 65 3a c6 98 65 3a c6 .e:......e:..e:. backtrace (crc c25aa925): kmemleak_alloc+0x34/0x3c __kmalloc_cache_noprof+0x150/0x1a4 drm_atomic_helper_setup_commit+0x1e8/0x7bc drm_atomic_helper_commit+0x3c/0x15c drm_atomic_commit+0xc0/0xf4 drm_atomic_helper_set_config+0x84/0xb8 drm_mode_setcrtc+0x32c/0x810 drm_ioctl+0x20c/0x488 sys_ioctl+0x14c/0xc20 ret_fast_syscall+0x0/0x54 Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Reviewed-by: Manikandan Muralidharan <manikandan.m@microchip.com> Link: https://patch.msgid.link/20251024-lcd_fixes_mainlining-v1-1-79b615130dc3@microchip.com Signed-off-by: Manikandan Muralidharan <manikandan.m@microchip.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04drm: Account property blob allocations to memcgXiao Kan
[ Upstream commit 26b4309a3ab82a0697751cde52eb336c29c19035 ] DRM_IOCTL_MODE_CREATEPROPBLOB allows userspace to allocate arbitrary-sized property blobs backed by kernel memory. Currently, the blob data allocation is not accounted to the allocating process's memory cgroup, allowing unprivileged users to trigger unbounded kernel memory consumption and potentially cause system-wide OOM. Mark the property blob data allocation with GFP_KERNEL_ACCOUNT so that the memory is properly charged to the caller's memcg. This ensures existing cgroup memory limits apply and prevents uncontrolled kernel memory growth without introducing additional policy or per-file limits. Signed-off-by: Xiao Kan <814091656@qq.com> Signed-off-by: Xiao Kan <xiao.kan@samsung.com> Link: https://patch.msgid.link/tencent_D12AA2DEDE6F359E1AF59405242FB7A5FD05@qq.com Signed-off-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04drm/amdkfd: Fix GART PTE for non-4K pagesize in svm_migrate_gart_map()Donet Tom
[ Upstream commit 6c160001661b6c4e20f5c31909c722741e14c2d8 ] In svm_migrate_gart_map(), while migrating GART mapping, the number of bytes copied for the GART table only accounts for CPU pages. On non-4K systems, each CPU page can contain multiple GPU pages, and the GART requires one 8-byte PTE per GPU page. As a result, an incorrect size was passed to the DMA, causing only a partial update of the GART table. Fix this function to work correctly on non-4K page-size systems by accounting for the number of GPU pages per CPU page when calculating the number of bytes to be copied. Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Philip Yang <Philip.Yang@amd.com> Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com> Signed-off-by: Donet Tom <donettom@linux.ibm.com> Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04drm/v3d: Set DMA segment size to avoid debug warningsXiaolei Wang
[ Upstream commit 9eb018828b1b30dfba689c060735c50fc5b9f704 ] When using V3D rendering with CONFIG_DMA_API_DEBUG enabled, the kernel occasionally reports a segment size mismatch. This is because 'max_seg_size' is not set. The kernel defaults to 64K. setting 'max_seg_size' to the maximum will prevent 'debug_dma_map_sg()' from complaining about the over-mapping of the V3D segment length. DMA-API: v3d 1002000000.v3d: mapping sg segment longer than device claims to support [len=8290304] [max=65536] WARNING: CPU: 0 PID: 493 at kernel/dma/debug.c:1179 debug_dma_map_sg+0x330/0x388 CPU: 0 UID: 0 PID: 493 Comm: Xorg Not tainted 6.12.53-yocto-standard #1 Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : debug_dma_map_sg+0x330/0x388 lr : debug_dma_map_sg+0x330/0x388 sp : ffff8000829a3ac0 x29: ffff8000829a3ac0 x28: 0000000000000001 x27: ffff8000813fe000 x26: ffffc1ffc0000000 x25: ffff00010fdeb760 x24: 0000000000000000 x23: ffff8000816a9bf0 x22: 0000000000000001 x21: 0000000000000002 x20: 0000000000000002 x19: ffff00010185e810 x18: ffffffffffffffff x17: 69766564206e6168 x16: 74207265676e6f6c x15: 20746e656d676573 x14: 20677320676e6970 x13: 5d34303334393134 x12: 0000000000000000 x11: 00000000000000c0 x10: 00000000000009c0 x9 : ffff8000800e0b7c x8 : ffff00010a315ca0 x7 : ffff8000816a5110 x6 : 0000000000000001 x5 : 000000000000002b x4 : 0000000000000002 x3 : 0000000000000008 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff00010a315280 Call trace: debug_dma_map_sg+0x330/0x388 __dma_map_sg_attrs+0xc0/0x278 dma_map_sgtable+0x30/0x58 drm_gem_shmem_get_pages_sgt+0xb4/0x140 v3d_bo_create_finish+0x28/0x130 [v3d] v3d_create_bo_ioctl+0x54/0x180 [v3d] drm_ioctl_kernel+0xc8/0x140 drm_ioctl+0x2d4/0x4d8 Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com> Link: https://patch.msgid.link/20251203130323.2247072-1-xiaolei.wang@windriver.com Signed-off-by: Maíra Canal <mcanal@igalia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04drm/i915/acpi: free _DSM package when no connectorsKaushlendra Kumar
[ Upstream commit 57b85fd53fccfdf14ce7b36d919c31aa752255f8 ] acpi_evaluate_dsm_typed() returns an ACPI package in pkg. When pkg->package.count == 0, we returned without freeing pkg, leaking memory. Free pkg before returning on the empty case. Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com> Fixes: 337d7a1621c7 ("drm/i915: Fix invalid access to ACPI _DSM objects") Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: https://patch.msgid.link/20260109032549.1826303-1-kaushlendra.kumar@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit c0a27a0ca8a34e96d08bb05a2c5d5ccf63fb8dc0) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-03-04drm/amdgpu: Use explicit VCN instance 0 in SR-IOV initSrinivasan Shanmugam
[ Upstream commit af26fa751c2eef66916acbf0d3c3e9159da56186 ] vcn_v2_0_start_sriov() declares a local variable "i" initialized to zero and uses it only as the instance index in SOC15_REG_OFFSET(UVD, i, ...). The value is never changed and all other fields are taken from adev->vcn.inst[0], so this path only ever programs VCN instance 0. This triggered a Smatch: warn: iterator 'i' not incremented Replace the dummy iterator with an explicit instance index of 0 in SOC15_REG_OFFSET() calls. Fixes: dd26858a9cd8 ("drm/amdgpu: implement initialization part on VCN2.0 for SRIOV") Reported by: Dan Carpenter <dan.carpenter@linaro.org> Cc: darlington Opara <darlington.opara@amd.com> Cc: Jinage Zhao <jiange.zhao@amd.com> Cc: Monk Liu <Monk.Liu@amd.com> Cc: Emily Deng <Emily.Deng@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Emily Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-19drm/tegra: hdmi: sor: Fix error: variable ‘j’ set but not usedBrahmajit Das
[ Upstream commit 1beee8d0c263b3e239c8d6616e4f8bb700bed658 ] The variable j is set, however never used in or outside the loop, thus resulting in dead code. Building with GCC 16 results in a build error due to -Werror=unused-but-set-variable= enabled by default. This patch clean up the dead code and fixes the build error. Example build log: drivers/gpu/drm/tegra/sor.c:1867:19: error: variable ‘j’ set but not used [-Werror=unused-but-set-variable=] 1867 | size_t i, j; | ^ Signed-off-by: Brahmajit Das <listout@listout.xyz> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20250901212020.3757519-1-listout@listout.xyz Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06drm/imx/tve: fix probe device leakJohan Hovold
[ Upstream commit e535c23513c63f02f67e3e09e0787907029efeaf ] Make sure to drop the reference taken to the DDC device during probe on probe failure (e.g. probe deferral) and on driver unbind. Fixes: fcbc51e54d2a ("staging: drm/imx: Add support for Television Encoder (TVEv2)") Cc: stable@vger.kernel.org # 3.10 Cc: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://patch.msgid.link/20251030163456.15807-1-johan@kernel.org Signed-off-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-06drm/amdkfd: fix a memory leak in device_queue_manager_init()Haoxiang Li
commit 80614c509810fc051312d1a7ccac8d0012d6b8d0 upstream. If dqm->ops.initialize() fails, add deallocate_hiq_sdma_mqd() to release the memory allocated by allocate_hiq_sdma_mqd(). Move deallocate_hiq_sdma_mqd() up to ensure proper function visibility at the point of use. Fixes: 11614c36bc8f ("drm/amdkfd: Allocate MQD trunk for HIQ and SDMA") Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn> Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Oak Zeng <Oak.Zeng@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit b7cccc8286bb9919a0952c812872da1dcfe9d390) Cc: stable@vger.kernel.org Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-06drm/amd/pm: Workaround SI powertune issue on Radeon 430 (v2)Timur Kristóf
[ Upstream commit 764a90eb02268a23b1bb98be5f4a13671346804a ] Radeon 430 and 520 are OEM GPUs from 2016~2017 They have the same device id: 0x6611 and revision: 0x87 On the Radeon 430, powertune is buggy and throttles the GPU, never allowing it to reach its maximum SCLK. Work around this bug by raising the TDP limits we program to the SMC from 24W (specified by the VBIOS on Radeon 430) to 32W. Disabling powertune entirely is not a viable workaround, because it causes the Radeon 520 to heat up above 100 C, which I prefer to avoid. Additionally, revise the maximum SCLK limit. Considering the above issue, these GPUs never reached a high SCLK on Linux, and the workarounds were added before the GPUs were released, so the workaround likely didn't target these specifically. Use 780 MHz (the maximum SCLK according to the VBIOS on the Radeon 430). Note that the Radeon 520 VBIOS has a higher maximum SCLK: 905 MHz, but in practice it doesn't seem to perform better with the higher clock, only heats up more. v2: Move the workaround to si_populate_smc_tdp_limits. Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 966d70f1e160bdfdecaf7ff2b3f22ad088516e9f) Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06drm/amd/pm: Don't clear SI SMC table when setting power limitTimur Kristóf
[ Upstream commit d5077426e1a76d269e518e048bde2e9fc49b32ad ] There is no reason to clear the SMC table. We also don't need to recalculate the power limit then. Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)") Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Timur Kristóf <timur.kristof@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit e214d626253f5b180db10dedab161b7caa41f5e9) Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-02-06drm/vmwgfx: Fix an error return check in vmw_compat_shader_add()Haoxiang Li
commit bf72b4b7bb7dbb643d204fa41e7463894a95999f upstream. In vmw_compat_shader_add(), the return value check of vmw_shader_alloc() is not proper. Modify the check for the return pointer 'res'. Found by code review and compiled on ubuntu 20.04. Fixes: 18e4a4669c50 ("drm/vmwgfx: Fix compat shader namespace") Cc: stable@vger.kernel.org Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn> Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://patch.msgid.link/20251224091105.1569464-1-lihaoxiang@isrc.iscas.ac.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-06drm/panel-simple: fix connector type for DataImage SCF0700C48GGU18 panelMarek Vasut
commit 6ab3d4353bf75005eaa375677c9fed31148154d6 upstream. The connector type for the DataImage SCF0700C48GGU18 panel is missing and devm_drm_panel_bridge_add() requires connector type to be set. This leads to a warning and a backtrace in the kernel log and panel does not work: " WARNING: CPU: 3 PID: 38 at drivers/gpu/drm/bridge/panel.c:379 devm_drm_of_get_bridge+0xac/0xb8 " The warning is triggered by a check for valid connector type in devm_drm_panel_bridge_add(). If there is no valid connector type set for a panel, the warning is printed and panel is not added. Fill in the missing connector type to fix the warning and make the panel operational once again. Cc: stable@vger.kernel.org Fixes: 97ceb1fb08b6 ("drm/panel: simple: Add support for DataImage SCF0700C48GGU18") Signed-off-by: Marek Vasut <marex@nabladev.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://patch.msgid.link/20260110152750.73848-1-marex@nabladev.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-02-06drm/nouveau/disp/nv50-: Set lock_core in curs507a_prepareLyude Paul
commit 9e9bc6be0fa0b6b6b73f4f831f3b77716d0a8d9e upstream. For a while, I've been seeing a strange issue where some (usually not all) of the display DMA channels will suddenly hang, particularly when there is a visible cursor on the screen that is being frequently updated, and especially when said cursor happens to go between two screens. While this brings back lovely memories of fixing Intel Skylake bugs, I would quite like to fix it :). It turns out the problem that's happening here is that we're managing to reach nv50_head_flush_set() in our atomic commit path without actually holding nv50_disp->mutex. This means that cursor updates happening in parallel (along with any other atomic updates that need to use the core channel) will race with eachother, which eventually causes us to corrupt the pushbuffer - leading to a plethora of various GSP errors, usually: nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 00000218 00102680 00000004 00800003 nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 0000021c 00040509 00000004 00000001 nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 00000000 00000000 00000001 00000001 The reason this is happening is because generally we check whether we need to set nv50_atom->lock_core at the end of nv50_head_atomic_check(). However, curs507a_prepare is called from the fb_prepare callback, which happens after the atomic check phase. As a result, this can lead to commits that both touch the core channel but also don't grab nv50_disp->mutex. So, fix this by making sure that we set nv50_atom->lock_core in cus507a_prepare(). Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Fixes: 1590700d94ac ("drm/nouveau/kms/nv50-: split each resource type into their own source files") Cc: <stable@vger.kernel.org> # v4.18+ Link: https://patch.msgid.link/20251219215344.170852-2-lyude@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19drm/pl111: Fix error handling in pl111_amba_probeMiaoqian Lin
commit 0ddd3bb4b14c9102c0267b3fd916c81fe5ab89c1 upstream. Jump to the existing dev_put label when devm_request_irq() fails so drm_dev_put() and of_reserved_mem_device_release() run instead of returning early and leaking resources. Found via static analysis and code review. Fixes: bed41005e617 ("drm/pl111: Initial drm/kms driver for pl111") Cc: stable@vger.kernel.org Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Signed-off-by: Linus Walleij <linusw@kernel.org> Link: https://patch.msgid.link/20251211123345.2392065-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19drm/i915/selftests: fix subtraction overflow bugAndrzej Hajda
[ Upstream commit ab3edc679c552a466e4bf0b11af3666008bd65a2 ] On some machines hole_end can be small enough to cause subtraction overflow. On the other side (addr + 2 * min_alignment) can overflow in case of mock tests. This patch should handle both cases. Fixes: e1c5f754067b59 ("drm/i915: Avoid overflow in computing pot_hole loop termination") Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3674 Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220624113528.2159210-1-andrzej.hajda@intel.com Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> [ Using I915_GTT_PAGE_SIZE instead of min_alignment due to 5.15 missing commit:87bd701ee268 ("drm/i915: enforce min GTT alignment for discrete cards")] Signed-off-by: Rajani Kantha <681739313@139.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19drm/gma500: Remove unused helper psb_fbdev_fb_setcolreg()Thomas Zimmermann
[ Upstream commit be729f9de6c64240645dc80a24162ac4d3fe00a8 ] Remove psb_fbdev_fb_setcolreg(), which hasn't been called in almost a decade. Gma500 commit 4d8d096e9ae8 ("gma500: introduce the framebuffer support code") added the helper psb_fbdev_fb_setcolreg() for setting the fbdev palette via fbdev's fb_setcolreg callback. Later commit 3da6c2f3b730 ("drm/gma500: use DRM_FB_HELPER_DEFAULT_OPS for fb_ops") set several default helpers for fbdev emulation, including fb_setcmap. The fbdev subsystem always prefers fb_setcmap over fb_setcolreg. [1] Hence, the gma500 code is no longer in use and gma500 has been using drm_fb_helper_setcmap() for several years without issues. Fixes: 3da6c2f3b730 ("drm/gma500: use DRM_FB_HELPER_DEFAULT_OPS for fb_ops") Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Cc: Stefan Christ <contact@stefanchrist.eu> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.10+ Link: https://elixir.bootlin.com/linux/v6.16.9/source/drivers/video/fbdev/core/fbcmap.c#L246 # [1] Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://lore.kernel.org/r/20250929082338.18845-1-tzimmermann@suse.de [ adapted patch from fbdev.c to framebuffer.c where the function was named psbfb_setcolreg() instead of psb_fbdev_fb_setcolreg() ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19drm/vmwgfx: Fix a null-ptr access in the cursor snooperZack Rusin
[ Upstream commit 5ac2c0279053a2c5265d46903432fb26ae2d0da2 ] Check that the resource which is converted to a surface exists before trying to use the cursor snooper on it. vmw_cmd_res_check allows explicit invalid (SVGA3D_INVALID_ID) identifiers because some svga commands accept SVGA3D_INVALID_ID to mean "no surface", unfortunately functions that accept the actual surfaces as objects might (and in case of the cursor snooper, do not) be able to handle null objects. Make sure that we validate not only the identifier (via the vmw_cmd_res_check) but also check that the actual resource exists before trying to do something with it. Fixes unchecked null-ptr reference in the snooping code. Signed-off-by: Zack Rusin <zack.rusin@broadcom.com> Fixes: c0951b797e7d ("drm/vmwgfx: Refactor resource management") Reported-by: Kuzey Arda Bulut <kuzeyardabulut@gmail.com> Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Ian Forbes <ian.forbes@broadcom.com> Link: https://lore.kernel.org/r/20250917153655.1968583-1-zack.rusin@broadcom.com Signed-off-by: Sasha Levin <sashal@kernel.org> [Shivani: Modified to apply on v5.10.y-v6.1.y] Signed-off-by: Shivani Agarwal <shivani.agarwal@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19drm/nouveau/dispnv50: Don't call drm_atomic_get_crtc_state() in prepare_fbLyude Paul
commit 560271e10b2c86e95ea35afa9e79822e4847f07a upstream. Since we recently started warning about uses of this function after the atomic check phase completes, we've started getting warnings about this in nouveau. It appears a misplaced drm_atomic_get_crtc_state() call has been hiding in our .prepare_fb callback for a while. So, fix this by adding a new nv50_head_atom_get_new() function and use that in our .prepare_fb callback instead. Signed-off-by: Lyude Paul <lyude@redhat.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Fixes: 1590700d94ac ("drm/nouveau/kms/nv50-: split each resource type into their own source files") Cc: <stable@vger.kernel.org> # v4.18+ Link: https://patch.msgid.link/20251211190256.396742-1-lyude@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19drm/ttm: Avoid NULL pointer deref for evicted BOsSimon Richter
commit 491adc6a0f9903c32b05f284df1148de39e8e644 upstream. It is possible for a BO to exist that is not currently associated with a resource, e.g. because it has been evicted. When devcoredump tries to read the contents of all BOs for dumping, we need to expect this as well -- in this case, ENODATA is recorded instead of the buffer contents. Fixes: 7d08df5d0bd3 ("drm/ttm: Add ttm_bo_access") Fixes: 09ac4fcb3f25 ("drm/ttm: Implement vm_operations_struct.access v2") Cc: stable <stable@kernel.org> Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6271 Signed-off-by: Simon Richter <Simon.Richter@hogyros.de> Reviewed-by: Matthew Brost <matthew.brost@intel.com> Reviewed-by: Shuicheng Lin <shuicheng.lin@intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Matthew Brost <matthew.brost@intel.com> Link: https://patch.msgid.link/20251013161241.709916-1-Simon.Richter@hogyros.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19drm/msm/a6xx: Fix out of bound IO access in a6xx_get_gmu_registersAkhil P Oommen
commit 779b68a5bf2764c8ed3aa800e41ba0d5d007e1e7 upstream. REG_A6XX_GMU_AO_AHB_FENCE_CTRL register falls under GMU's register range. So, use gmu_write() routines to write to this register. Fixes: 1707add81551 ("drm/msm/a6xx: Add a6xx gpu state") Cc: stable@vger.kernel.org Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Patchwork: https://patchwork.freedesktop.org/patch/688993/ Message-ID: <20251118-kaana-gpu-support-v4-1-86eeb8e93fb6@oss.qualcomm.com> Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19drm/amd/display: Use GFP_ATOMIC in dc_create_plane_state()Alex Deucher
commit 3c41114dcdabb7b25f5bc33273c6db9c7af7f4a7 upstream. This can get called from an atomic context. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4470 Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 8acdad9344cc7b4e7bc01f0dfea80093eb3768db) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2026-01-19drm/amd/display: Fix logical vs bitwise bug in get_embedded_panel_info_v2_1()Dan Carpenter
[ Upstream commit 1a79482699b4d1e43948d14f0c7193dc1dcad858 ] The .H_SYNC_POLARITY and .V_SYNC_POLARITY variables are 1 bit bitfields of a u32. The ATOM_HSYNC_POLARITY define is 0x2 and the ATOM_VSYNC_POLARITY is 0x4. When we do a bitwise negate of 0, 2, or 4 then the last bit is always 1 so this code always sets .H_SYNC_POLARITY and .V_SYNC_POLARITY to true. This code is instead intended to check if the ATOM_HSYNC_POLARITY or ATOM_VSYNC_POLARITY flags are set and reverse the result. In other words, it's supposed to be a logical negate instead of a bitwise negate. Fixes: ae79c310b1a6 ("drm/amd/display: Add DCE12 bios parser support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-19drm/mediatek: Fix CCORR mtk_ctm_s31_32_to_s1_n function issueJay Liu
[ Upstream commit 20ac36b71c53b8c36c6903b5ca87c75226700a97 ] if matrixbit is 11, The range of color matrix is from 0 to (BIT(12) - 1). Values from 0 to (BIT(11) - 1) represent positive numbers, values from BIT(11) to (BIT(12) - 1) represent negative numbers. For example, -1 need converted to 8191. so convert S31.32 to HW Q2.11 format by drm_color_ctm_s31_32_to_qm_n, and set int_bits to 2. Fixes: 738ed4156fba ("drm/mediatek: Add matrix_bits private data for ccorr") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Jay Liu <jay.liu@mediatek.com> Link: https://patchwork.kernel.org/project/dri-devel/patch/20250921055416.25588-2-jay.liu@mediatek.com/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-19drm/vgem-fence: Fix potential deadlock on releaseJanusz Krzysztofik
[ Upstream commit 78b4d6463e9e69e5103f98b367f8984ad12cdc6f ] A timer that expires a vgem fence automatically in 10 seconds is now released with timer_delete_sync() from fence->ops.release() called on last dma_fence_put(). In some scenarios, it can run in IRQ context, which is not safe unless TIMER_IRQSAFE is used. One potentially risky scenario was demonstrated in Intel DRM CI trybot, BAT run on machine bat-adlp-6, while working on new IGT subtests syncobj_timeline@stress-* as user space replacements of some problematic test cases of a dma-fence-chain selftest [1]. [117.004338] ================================ [117.004340] WARNING: inconsistent lock state [117.004342] 6.17.0-rc7-CI_DRM_17270-g7644974e648c+ #1 Tainted: G S U [117.004346] -------------------------------- [117.004347] inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. [117.004349] swapper/0/0 [HC1[1]:SC1[1]:HE0:SE0] takes: [117.004352] ffff888138f86aa8 ((&fence->timer)){?.-.}-{0:0}, at: __timer_delete_sync+0x4b/0x190 [117.004361] {HARDIRQ-ON-W} state was registered at: [117.004363] lock_acquire+0xc4/0x2e0 [117.004366] call_timer_fn+0x80/0x2a0 [117.004368] __run_timers+0x231/0x310 [117.004370] run_timer_softirq+0x76/0xe0 [117.004372] handle_softirqs+0xd4/0x4d0 [117.004375] __irq_exit_rcu+0x13f/0x160 [117.004377] irq_exit_rcu+0xe/0x20 [117.004379] sysvec_apic_timer_interrupt+0xa0/0xc0 [117.004382] asm_sysvec_apic_timer_interrupt+0x1b/0x20 [117.004385] cpuidle_enter_state+0x12b/0x8a0 [117.004388] cpuidle_enter+0x2e/0x50 [117.004393] call_cpuidle+0x22/0x60 [117.004395] do_idle+0x1fd/0x260 [117.004398] cpu_startup_entry+0x29/0x30 [117.004401] start_secondary+0x12d/0x160 [117.004404] common_startup_64+0x13e/0x141 [117.004407] irq event stamp: 2282669 [117.004409] hardirqs last enabled at (2282668): [<ffffffff8289db71>] _raw_spin_unlock_irqrestore+0x51/0x80 [117.004414] hardirqs last disabled at (2282669): [<ffffffff82882021>] sysvec_irq_work+0x11/0xc0 [117.004419] softirqs last enabled at (2254702): [<ffffffff8289fd00>] __do_softirq+0x10/0x18 [117.004423] softirqs last disabled at (2254725): [<ffffffff813d4ddf>] __irq_exit_rcu+0x13f/0x160 [117.004426] other info that might help us debug this: [117.004429] Possible unsafe locking scenario: [117.004432] CPU0 [117.004433] ---- [117.004434] lock((&fence->timer)); [117.004436] <Interrupt> [117.004438] lock((&fence->timer)); [117.004440] *** DEADLOCK *** [117.004443] 1 lock held by swapper/0/0: [117.004445] #0: ffffc90000003d50 ((&fence->timer)){?.-.}-{0:0}, at: call_timer_fn+0x7a/0x2a0 [117.004450] stack backtrace: [117.004453] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G S U 6.17.0-rc7-CI_DRM_17270-g7644974e648c+ #1 PREEMPT(voluntary) [117.004455] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER [117.004455] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023 [117.004456] Call Trace: [117.004456] <IRQ> [117.004457] dump_stack_lvl+0x91/0xf0 [117.004460] dump_stack+0x10/0x20 [117.004461] print_usage_bug.part.0+0x260/0x360 [117.004463] mark_lock+0x76e/0x9c0 [117.004465] ? register_lock_class+0x48/0x4a0 [117.004467] __lock_acquire+0xbc3/0x2860 [117.004469] lock_acquire+0xc4/0x2e0 [117.004470] ? __timer_delete_sync+0x4b/0x190 [117.004472] ? __timer_delete_sync+0x4b/0x190 [117.004473] __timer_delete_sync+0x68/0x190 [117.004474] ? __timer_delete_sync+0x4b/0x190 [117.004475] timer_delete_sync+0x10/0x20 [117.004476] vgem_fence_release+0x19/0x30 [vgem] [117.004478] dma_fence_release+0xc1/0x3b0 [117.004480] ? dma_fence_release+0xa1/0x3b0 [117.004481] dma_fence_chain_release+0xe7/0x130 [117.004483] dma_fence_release+0xc1/0x3b0 [117.004484] ? _raw_spin_unlock_irqrestore+0x27/0x80 [117.004485] dma_fence_chain_irq_work+0x59/0x80 [117.004487] irq_work_single+0x75/0xa0 [117.004490] irq_work_run_list+0x33/0x60 [117.004491] irq_work_run+0x18/0x40 [117.004493] __sysvec_irq_work+0x35/0x170 [117.004494] sysvec_irq_work+0x47/0xc0 [117.004496] asm_sysvec_irq_work+0x1b/0x20 [117.004497] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80 [117.004499] Code: 00 75 1c 65 ff 0d d9 34 68 01 74 20 5b 41 5c 5d 31 c0 31 d2 31 c9 31 f6 31 ff c3 cc cc cc cc e8 7f 9d d3 fe fb 0f 1f 44 00 00 <eb> d7 0f 1f 44 00 00 5b 41 5c 5d 31 c0 31 d2 31 c9 31 f6 31 ff c3 [117.004499] RSP: 0018:ffffc90000003cf0 EFLAGS: 00000246 [117.004500] RAX: 0000000000000000 RBX: ffff888155e94c40 RCX: 0000000000000000 [117.004501] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [117.004502] RBP: ffffc90000003d00 R08: 0000000000000000 R09: 0000000000000000 [117.004502] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000246 [117.004502] R13: 0000000000000001 R14: 0000000000000246 R15: ffff888155e94c80 [117.004506] dma_fence_signal+0x49/0xb0 [117.004507] ? __pfx_vgem_fence_timeout+0x10/0x10 [vgem] [117.004508] vgem_fence_timeout+0x12/0x20 [vgem] [117.004509] call_timer_fn+0xa1/0x2a0 [117.004512] ? __pfx_vgem_fence_timeout+0x10/0x10 [vgem] [117.004513] __run_timers+0x231/0x310 [117.004514] ? tmigr_handle_remote+0x2ac/0x560 [117.004517] timer_expire_remote+0x46/0x70 [117.004518] tmigr_handle_remote+0x433/0x560 [117.004520] ? __run_timers+0x239/0x310 [117.004521] ? run_timer_softirq+0x21/0xe0 [117.004522] ? lock_release+0xce/0x2a0 [117.004524] run_timer_softirq+0xcf/0xe0 [117.004525] handle_softirqs+0xd4/0x4d0 [117.004526] __irq_exit_rcu+0x13f/0x160 [117.004527] irq_exit_rcu+0xe/0x20 [117.004528] sysvec_apic_timer_interrupt+0xa0/0xc0 [117.004529] </IRQ> [117.004529] <TASK> [117.004529] asm_sysvec_apic_timer_interrupt+0x1b/0x20 [117.004530] RIP: 0010:cpuidle_enter_state+0x12b/0x8a0 [117.004532] Code: 48 0f a3 05 97 ce 0e 01 0f 82 2e 03 00 00 31 ff e8 8a 41 bd fe 80 7d d0 00 0f 85 11 03 00 00 e8 8b 06 d5 fe fb 0f 1f 44 00 00 <45> 85 f6 0f 88 67 02 00 00 4d 63 ee 49 83 fd 0a 0f 83 34 06 00 00 [117.004532] RSP: 0018:ffffffff83403d88 EFLAGS: 00000246 [117.004533] RAX: 0000000000000000 RBX: ffff88888f046440 RCX: 0000000000000000 [117.004533] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [117.004534] RBP: ffffffff83403dd8 R08: 0000000000000000 R09: 0000000000000000 [117.004534] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff837cbe80 [117.004534] R13: 0000000000000004 R14: 0000000000000004 R15: 0000001ad1df466b [117.004537] ? cpuidle_enter_state+0x125/0x8a0 [117.004538] ? sched_clock_noinstr+0x9/0x10 [117.004540] cpuidle_enter+0x2e/0x50 [117.004542] call_cpuidle+0x22/0x60 [117.004542] do_idle+0x1fd/0x260 [117.004544] cpu_startup_entry+0x29/0x30 [117.004546] rest_init+0x104/0x200 [117.004548] start_kernel+0x93d/0xbd0 [117.004550] ? load_ucode_intel_bsp+0x2a/0x90 [117.004551] ? sme_unmap_bootdata+0x14/0x80 [117.004554] x86_64_start_reservations+0x18/0x30 [117.004555] x86_64_start_kernel+0xfd/0x150 [117.004556] ? soft_restart_cpu+0x14/0x14 [117.004558] common_startup_64+0x13e/0x141 [117.004560] </TASK> [117.004565] ------------[ cut here ]------------ [117.004692] WARNING: CPU: 0 PID: 0 at kernel/time/timer.c:1610 __timer_delete_sync+0x126/0x190 [117.004697] Modules linked in: vgem snd_hda_codec_intelhdmi snd_hda_codec_hdmi i915 prime_numbers ttm drm_buddy drm_display_helper cec rc_core i2c_algo_bit hid_sensor_custom hid_sensor_hub hid_generic intel_ishtp_hid hid intel_uncore_frequency intel_uncore_frequency_common x86_pkg_temp_thermal intel_powerclamp cmdlinepart ee1004 r8153_ecm spi_nor coretemp cdc_ether mei_pxp mei_hdcp usbnet mtd intel_rapl_msr wmi_bmof kvm_intel snd_hda_intel snd_intel_dspcfg processor_thermal_device_pci kvm snd_hda_codec processor_thermal_device irqbypass processor_thermal_wt_hint polyval_clmulni platform_temperature_control snd_hda_core ghash_clmulni_intel processor_thermal_rfim spi_pxa2xx_platform snd_hwdep aesni_intel processor_thermal_rapl dw_dmac snd_pcm dw_dmac_core intel_rapl_common r8152 rapl mii intel_cstate spi_pxa2xx_core i2c_i801 processor_thermal_wt_req snd_timer i2c_mux mei_me intel_ish_ipc processor_thermal_power_floor e1000e snd i2c_smbus spi_intel_pci processor_thermal_mbox mei soundcore intel_ishtp thunderbolt idma64 [117.004733] spi_intel int340x_thermal_zone igen6_edac binfmt_misc intel_skl_int3472_tps68470 intel_pmc_core tps68470_regulator video clk_tps68470 pmt_telemetry pmt_discovery nls_iso8859_1 pmt_class intel_pmc_ssram_telemetry intel_skl_int3472_discrete int3400_thermal intel_hid intel_skl_int3472_common acpi_thermal_rel intel_vsec wmi pinctrl_tigerlake acpi_tad sparse_keymap acpi_pad dm_multipath msr nvme_fabrics fuse efi_pstore nfnetlink autofs4 [117.004782] CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G S U 6.17.0-rc7-CI_DRM_17270-g7644974e648c+ #1 PREEMPT(voluntary) [117.004787] Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER [117.004789] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR4 RVP, BIOS RPLPFWI1.R00.4035.A00.2301200723 01/20/2023 [117.004793] RIP: 0010:__timer_delete_sync+0x126/0x190 [117.004795] Code: 31 c0 45 31 c9 c3 cc cc cc cc 48 8b 75 d0 45 84 f6 74 63 49 c7 45 18 00 00 00 00 48 89 c7 e8 51 46 39 01 f3 90 e9 66 ff ff ff <0f> 0b e9 5f ff ff ff e8 ee e4 0c 00 49 8d 5d 28 45 31 c9 31 c9 4c [117.004801] RSP: 0018:ffffc90000003a40 EFLAGS: 00010046 [117.004804] RAX: ffffffff815093fb RBX: ffff888138f86aa8 RCX: 0000000000000000 [117.004807] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [117.004809] RBP: ffffc90000003a70 R08: 0000000000000000 R09: 0000000000000000 [117.004812] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff815093fb [117.004814] R13: ffff888138f86a80 R14: 0000000000000000 R15: 0000000000000000 [117.004817] FS: 0000000000000000(0000) GS:ffff88890b0f7000(0000) knlGS:0000000000000000 [117.004820] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [117.004823] CR2: 00005db8131eb7f0 CR3: 0000000003448000 CR4: 0000000000f52ef0 [117.004826] PKRU: 55555554 [117.004827] Call Trace: [117.004829] <IRQ> [117.004831] timer_delete_sync+0x10/0x20 [117.004833] vgem_fence_release+0x19/0x30 [vgem] [117.004836] dma_fence_release+0xc1/0x3b0 [117.004838] ? dma_fence_release+0xa1/0x3b0 [117.004841] dma_fence_chain_release+0xe7/0x130 [117.004844] dma_fence_release+0xc1/0x3b0 [117.004847] ? _raw_spin_unlock_irqrestore+0x27/0x80 [117.004850] dma_fence_chain_irq_work+0x59/0x80 [117.004853] irq_work_single+0x75/0xa0 [117.004857] irq_work_run_list+0x33/0x60 [117.004860] irq_work_run+0x18/0x40 [117.004863] __sysvec_irq_work+0x35/0x170 [117.004865] sysvec_irq_work+0x47/0xc0 [117.004868] asm_sysvec_irq_work+0x1b/0x20 [117.004871] RIP: 0010:_raw_spin_unlock_irqrestore+0x57/0x80 [117.004874] Code: 00 75 1c 65 ff 0d d9 34 68 01 74 20 5b 41 5c 5d 31 c0 31 d2 31 c9 31 f6 31 ff c3 cc cc cc cc e8 7f 9d d3 fe fb 0f 1f 44 00 00 <eb> d7 0f 1f 44 00 00 5b 41 5c 5d 31 c0 31 d2 31 c9 31 f6 31 ff c3 [117.004879] RSP: 0018:ffffc90000003cf0 EFLAGS: 00000246 [117.004882] RAX: 0000000000000000 RBX: ffff888155e94c40 RCX: 0000000000000000 [117.004884] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [117.004887] RBP: ffffc90000003d00 R08: 0000000000000000 R09: 0000000000000000 [117.004890] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000246 [117.004892] R13: 0000000000000001 R14: 0000000000000246 R15: ffff888155e94c80 [117.004897] dma_fence_signal+0x49/0xb0 [117.004899] ? __pfx_vgem_fence_timeout+0x10/0x10 [vgem] [117.004902] vgem_fence_timeout+0x12/0x20 [vgem] [117.004904] call_timer_fn+0xa1/0x2a0 [117.004908] ? __pfx_vgem_fence_timeout+0x10/0x10 [vgem] [117.004910] __run_timers+0x231/0x310 [117.004913] ? tmigr_handle_remote+0x2ac/0x560 [117.004917] timer_expire_remote+0x46/0x70 [117.004919] tmigr_handle_remote+0x433/0x560 [117.004923] ? __run_timers+0x239/0x310 [117.004925] ? run_timer_softirq+0x21/0xe0 [117.004928] ? lock_release+0xce/0x2a0 [117.004931] run_timer_softirq+0xcf/0xe0 [117.004933] handle_softirqs+0xd4/0x4d0 [117.004936] __irq_exit_rcu+0x13f/0x160 [117.004938] irq_exit_rcu+0xe/0x20 [117.004940] sysvec_apic_timer_interrupt+0xa0/0xc0 [117.004943] </IRQ> [117.004944] <TASK> [117.004946] asm_sysvec_apic_timer_interrupt+0x1b/0x20 [117.004949] RIP: 0010:cpuidle_enter_state+0x12b/0x8a0 [117.004953] Code: 48 0f a3 05 97 ce 0e 01 0f 82 2e 03 00 00 31 ff e8 8a 41 bd fe 80 7d d0 00 0f 85 11 03 00 00 e8 8b 06 d5 fe fb 0f 1f 44 00 00 <45> 85 f6 0f 88 67 02 00 00 4d 63 ee 49 83 fd 0a 0f 83 34 06 00 00 [117.004961] RSP: 0018:ffffffff83403d88 EFLAGS: 00000246 [117.004963] RAX: 0000000000000000 RBX: ffff88888f046440 RCX: 0000000000000000 [117.004966] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [117.004968] RBP: ffffffff83403dd8 R08: 0000000000000000 R09: 0000000000000000 [117.004971] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff837cbe80 [117.004974] R13: 0000000000000004 R14: 0000000000000004 R15: 0000001ad1df466b [117.004978] ? cpuidle_enter_state+0x125/0x8a0 [117.004981] ? sched_clock_noinstr+0x9/0x10 [117.004985] cpuidle_enter+0x2e/0x50 [117.004989] call_cpuidle+0x22/0x60 [117.004991] do_idle+0x1fd/0x260 [117.005001] cpu_startup_entry+0x29/0x30 [117.005004] rest_init+0x104/0x200 [117.005008] start_kernel+0x93d/0xbd0 [117.005011] ? load_ucode_intel_bsp+0x2a/0x90 [117.005014] ? sme_unmap_bootdata+0x14/0x80 [117.005017] x86_64_start_reservations+0x18/0x30 [117.005020] x86_64_start_kernel+0xfd/0x150 [117.005023] ? soft_restart_cpu+0x14/0x14 [117.005026] common_startup_64+0x13e/0x141 [117.005030] </TASK> [117.005032] irq event stamp: 2282669 [117.005034] hardirqs last enabled at (2282668): [<ffffffff8289db71>] _raw_spin_unlock_irqrestore+0x51/0x80 [117.005038] hardirqs last disabled at (2282669): [<ffffffff82882021>] sysvec_irq_work+0x11/0xc0 [117.005043] softirqs last enabled at (2254702): [<ffffffff8289fd00>] __do_softirq+0x10/0x18 [117.005047] softirqs last disabled at (2254725): [<ffffffff813d4ddf>] __irq_exit_rcu+0x13f/0x160 [117.005051] ---[ end trace 0000000000000000 ]--- Make the timer IRQ safe. [1] https://patchwork.freedesktop.org/series/154987/#rev2 Fixes: 4077798484459 ("drm/vgem: Attach sw fences to exported vGEM dma-buf (ioctl)") Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://lore.kernel.org/r/20250926152628.2165080-2-janusz.krzysztofik@linux.intel.com Signed-off-by: Maarten Lankhorst <dev@lankhorst.se> Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-19drm/panel: visionox-rm69299: Don't clear all mode flagsGuido Günther
[ Upstream commit 39144b611e9cd4f5814f4098c891b545dd70c536 ] Don't clear all mode flags. We only want to maek sure we use HS mode during unprepare. Fixes: c7f66d32dd431 ("drm/panel: add support for rm69299 visionox panel") Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250910-shift6mq-panel-v3-2-a7729911afb9@sigxcpu.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-19gpu: host1x: Fix race in syncpt alloc/freeMainak Sen
[ Upstream commit c7d393267c497502fa737607f435f05dfe6e3d9b ] Fix race condition between host1x_syncpt_alloc() and host1x_syncpt_put() by using kref_put_mutex() instead of kref_put() + manual mutex locking. This ensures no thread can acquire the syncpt_mutex after the refcount drops to zero but before syncpt_release acquires it. This prevents races where syncpoints could be allocated while still being cleaned up from a previous release. Remove explicit mutex locking in syncpt_release as kref_put_mutex() handles this atomically. Signed-off-by: Mainak Sen <msen@nvidia.com> Fixes: f5ba33fb9690 ("gpu: host1x: Reserve VBLANK syncpoints at initialization") Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20250707-host1x-syncpt-race-fix-v1-1-28b0776e70bc@nvidia.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2026-01-19drm/i915/selftests: Fix inconsistent IS_ERR and PTR_ERRKai Song
[ Upstream commit fc7bf4c0d65a342b29fe38c332db3fe900b481b9 ] Fix inconsistent IS_ERR and PTR_ERR in i915_gem_dmabuf.c Signed-off-by: Kai Song <songkai01@inspur.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211022120655.22173-1-songkai01@inspur.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-12-07drm/amd/display: Check NULL before accessingAlex Hung
commit 3ce62c189693e8ed7b3abe551802bbc67f3ace54 upstream. [WHAT] IGT kms_cursor_legacy's long-nonblocking-modeset-vs-cursor-atomic fails with NULL pointer dereference. This can be reproduced with both an eDP panel and a DP monitors connected. BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 13 UID: 0 PID: 2960 Comm: kms_cursor_lega Not tainted 6.16.0-99-custom #8 PREEMPT(voluntary) Hardware name: AMD ........ RIP: 0010:dc_stream_get_scanoutpos+0x34/0x130 [amdgpu] Code: 57 4d 89 c7 41 56 49 89 ce 41 55 49 89 d5 41 54 49 89 fc 53 48 83 ec 18 48 8b 87 a0 64 00 00 48 89 75 d0 48 c7 c6 e0 41 30 c2 <48> 8b 38 48 8b 9f 68 06 00 00 e8 8d d7 fd ff 31 c0 48 81 c3 e0 02 RSP: 0018:ffffd0f3c2bd7608 EFLAGS: 00010292 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffd0f3c2bd7668 RDX: ffffd0f3c2bd7664 RSI: ffffffffc23041e0 RDI: ffff8b32494b8000 RBP: ffffd0f3c2bd7648 R08: ffffd0f3c2bd766c R09: ffffd0f3c2bd7760 R10: ffffd0f3c2bd7820 R11: 0000000000000000 R12: ffff8b32494b8000 R13: ffffd0f3c2bd7664 R14: ffffd0f3c2bd7668 R15: ffffd0f3c2bd766c FS: 000071f631b68700(0000) GS:ffff8b399f114000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000001b8105000 CR4: 0000000000f50ef0 PKRU: 55555554 Call Trace: <TASK> dm_crtc_get_scanoutpos+0xd7/0x180 [amdgpu] amdgpu_display_get_crtc_scanoutpos+0x86/0x1c0 [amdgpu] ? __pfx_amdgpu_crtc_get_scanout_position+0x10/0x10[amdgpu] amdgpu_crtc_get_scanout_position+0x27/0x50 [amdgpu] drm_crtc_vblank_helper_get_vblank_timestamp_internal+0xf7/0x400 drm_crtc_vblank_helper_get_vblank_timestamp+0x1c/0x30 drm_crtc_get_last_vbltimestamp+0x55/0x90 drm_crtc_next_vblank_start+0x45/0xa0 drm_atomic_helper_wait_for_fences+0x81/0x1f0 ... Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 621e55f1919640acab25383362b96e65f2baea3c) Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-05-24 14:57:27 +0000