summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2019-05-31drm/sun4i: dsi: Enforce boundaries on the start delayMaxime Ripard
[ Upstream commit efa31801203ac2f5c6a82a28cb991c7163ee0f1d ] The Allwinner BSP makes sure that we don't end up with a null start delay or with a delay larger than vtotal. The former condition is likely to happen now with the reworked start delay, so make sure we enforce the same boundaries. Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/c9889cf5f7a3d101ef380905900b45a182596f56.1549896081.git-series.maxime.ripard@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/sun4i: dsi: Change the start delay calculationMaxime Ripard
[ Upstream commit da676c6aa6413d59ab0a80c97bbc273025e640b2 ] The current calculation for the video start delay in the current DSI driver is that it is the total vertical size, minus the front porch and sync length, plus 1. This equals to the active vertical size plus the back porch plus 1. That 1 is coming in the Allwinner BSP from an variable that is set to 1. However, if we look at the Allwinner BSP more closely, and especially in the "legacy" code for the display (in drivers/video/sunxi/legacy/), we can see that this variable is actually computed from the porches and the sync minus 10, clamped between 8 and 100. This fixes the start delay symptom we've seen on some panels (vblank timeouts with vertical white stripes at the bottom of the panel). Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/6e5f72e68f47ca0223877464bf12f0c3f3978de8.1549896081.git-series.maxime.ripard@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm: Wake up next in drm_read() chain if we are forced to putback the eventChris Wilson
[ Upstream commit 60b801999c48b6c1dd04e653a38e2e613664264e ] After an event is sent, we try to copy it into the user buffer of the first waiter in drm_read() and if the user buffer doesn't have enough room we put it back onto the list. However, we didn't wake up any subsequent waiter, so that event may sit on the list until either a new vblank event is sent or a new waiter appears. Rare, but in the worst case may lead to a stuck process. Testcase: igt/drm_read/short-buffer-wakeup Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170804082328.17173-1-chris@chris-wilson.co.uk Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/drv: Hold ref on parent device during drm_device lifetimeNoralf Trønnes
[ Upstream commit 56be6503aab2bc3a30beae408071b9be5e1bae51 ] This makes it safe to access drm_device->dev after the parent device has been removed/unplugged. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-2-noralf@tronnes.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/v3d: Handle errors from IRQ setup.Eric Anholt
[ Upstream commit fc22771547e7e8a63679f0218e943d72b107de65 ] Noted in review by Dave Emett for V3D 4.2 support. Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20190308174336.7866-1-eric@anholt.net Reviewed-by: Dave Emett <david.emett@broadcom.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/omap: Notify all devices in the pipeline of output disconnectionLaurent Pinchart
[ Upstream commit 27a7e3e18419869cdcc414a404f3fe66f1b4e644 ] For HDMI pipelines, when the output gets disconnected the device handling CEC needs to be notified. Instead of guessing which device that would be (and sometimes getting it wrong), notify all devices in the pipeline. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/omap: dsi: Fix PM for display blank with paired dss_pll callsTony Lindgren
[ Upstream commit fe4ed1b457943113ee1138c939fbdeede4af6cf3 ] Currently dsi_display_init_dsi() calls dss_pll_enable() but it is not paired with dss_pll_disable() in dsi_display_uninit_dsi(). This leaves the DSS clocks enabled when the display is blanked wasting about extra 5mW of power while idle. The clock that is left on by not calling dss_pll_disable() is DSS_CLKCTRL bit 10 OPTFCLKEN_SYS_CLK that is the source clock for DSI PLL. We can fix this issue by by making the current dsi_pll_uninit() into dsi_pll_disable(). This way we can just call dss_pll_disable() from dsi_display_uninit_dsi() and the code becomes a bit easier to follow. However, we need to also consider that DSI PLL can be muxed for DVI too as pointed out by Tomi Valkeinen <tomi.valkeinen@ti.com>. In the DVI case, we want to unconditionally disable the clocks. To get around this issue, we separate out the DSI lane handling from dsi_pll_enable() and dsi_pll_disable() as suggested by Tomi in an earlier experimental patch. So we must only toggle the DSI regulator based on the vdds_dsi_enabled flag from dsi_display_init_dsi() and dsi_display_uninit_dsi(). We need to make these two changes together to avoid breaking things for DVI when fixing the DSI clock handling. And this all causes a slight renumbering of the error path for dsi_display_init_dsi(). Suggested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm: writeback: Fix leak of writeback jobLaurent Pinchart
[ Upstream commit e482ae9b5fdc01a343f22f52930e85a6cfdf85eb ] Writeback jobs are allocated when the WRITEBACK_FB_ID is set, and deleted when the jobs complete. This results in both a memory leak of the job and a leak of the framebuffer if the atomic commit returns before the job is queued for processing, for instance if the atomic check fails or if the commit runs in test-only mode. Fix this by implementing the drm_writeback_cleanup_job() function and calling it from __drm_atomic_helper_connector_destroy_state(). As writeback jobs are removed from the state when they're queued for processing, any job left in the state when the state gets destroyed needs to be cleaned up. The existing declaration of the drm_writeback_cleanup_job() function without an implementation hints that this problem was considered, but never addressed. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Brian Starkey <brian.starkey@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/amd/display: Set stream->mode_changed when connectors changeNicholas Kazlauskas
[ Upstream commit b9952f93cd2cf5fca82b06a8179c0f5f7b769e83 ] [Why] The kms_plane@plane-position-covered-pipe-*-planes subtests can produce a sequence of atomic commits such that neither active_changed nor mode_changed but connectors_changed. When this happens we remove the old stream from the context and add a new stream but the new stream doesn't have mode_changed=true set. This incorrect programming sequence causes CRC mismatches to occur in the test. The stream->mode_changed value should be set whenever a new stream is created. [How] A new stream is created whenever drm_atomic_crtc_needs_modeset is true. We previously covered the active_changed and mode_changed conditions for the CRTC but connectors_changed is also checked within drm_atomic_crtc_needs_modeset. So just use drm_atomic_crtc_needs_modeset directly to determine the mode_changed flag. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/amd/display: Fix Divide by 0 in memory calculationsMurton Liu
[ Upstream commit 59979bf8be1784ebfc44215031c6c88ca22ae65d ] Check if we get any values equal to 0, and set to 1 if so. Signed-off-by: Murton Liu <murton.liu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Acked-by: Sivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/amd/display: add pipe lock during stream updateWenjing Liu
[ Upstream commit e6bddf6c67f9a3abf6f1ef75e52bc1cd228dfe4d ] [why] Stream update will adjust both info packets and stream params, need to make sure all things are applied togather. [how] add pipe lock during stream update Signed-off-by: Wenjing Liu <Wenjing.Liu@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31tinydrm/mipi-dbi: Use dma-safe buffers for all SPI transfersNoralf Trønnes
[ Upstream commit a89bfc5d9a0732d84b4de311e27133daa0586316 ] Buffers passed to spi_sync() must be dma-safe even for tiny buffers since some SPI controllers use DMA for all transfers. Example splat with CONFIG_DMA_API_DEBUG enabled: [ 23.750467] DMA-API: dw_dmac_pci 0000:00:15.0: device driver maps memory from stack [probable addr=000000001e49185d] [ 23.750529] WARNING: CPU: 1 PID: 1296 at kernel/dma/debug.c:1161 check_for_stack+0xb7/0x190 [ 23.750533] Modules linked in: mmc_block(+) spi_pxa2xx_platform(+) pwm_lpss_pci pwm_lpss spi_pxa2xx_pci sdhci_pci cqhci intel_mrfld_pwrbtn extcon_intel_mrfld sdhci intel_mrfld_adc led_class mmc_core ili9341 mipi_dbi tinydrm backlight ti_ads7950 industrialio_triggered_buffer kfifo_buf intel_soc_pmic_mrfld hci_uart btbcm [ 23.750599] CPU: 1 PID: 1296 Comm: modprobe Not tainted 5.0.0-rc7+ #236 [ 23.750605] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48 [ 23.750620] RIP: 0010:check_for_stack+0xb7/0x190 [ 23.750630] Code: 8b 6d 50 4d 85 ed 75 04 4c 8b 6d 10 48 89 ef e8 2f 8b 44 00 48 89 c6 4a 8d 0c 23 4c 89 ea 48 c7 c7 88 d0 82 b4 e8 40 7c f9 ff <0f> 0b 8b 05 79 00 4b 01 85 c0 74 07 5b 5d 41 5c 41 5d c3 8b 05 54 [ 23.750637] RSP: 0000:ffff97bbc0292fa0 EFLAGS: 00010286 [ 23.750646] RAX: 0000000000000000 RBX: ffff97bbc0290000 RCX: 0000000000000006 [ 23.750652] RDX: 0000000000000007 RSI: 0000000000000002 RDI: ffff94b33e115450 [ 23.750658] RBP: ffff94b33c8578b0 R08: 0000000000000002 R09: 00000000000201c0 [ 23.750664] R10: 00000006ecb0ccc6 R11: 0000000000034f38 R12: 000000000000316c [ 23.750670] R13: ffff94b33c84b250 R14: ffff94b33dedd5a0 R15: 0000000000000001 [ 23.750679] FS: 0000000000000000(0000) GS:ffff94b33e100000(0063) knlGS:00000000f7faf690 [ 23.750686] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 23.750691] CR2: 00000000f7f54faf CR3: 000000000722c000 CR4: 00000000001006e0 [ 23.750696] Call Trace: [ 23.750713] debug_dma_map_sg+0x100/0x340 [ 23.750727] ? dma_direct_map_sg+0x3b/0xb0 [ 23.750739] spi_map_buf+0x25a/0x300 [ 23.750751] __spi_pump_messages+0x2a4/0x680 [ 23.750762] __spi_sync+0x1dd/0x1f0 [ 23.750773] spi_sync+0x26/0x40 [ 23.750790] mipi_dbi_typec3_command_read+0x14d/0x240 [mipi_dbi] [ 23.750802] ? spi_finalize_current_transfer+0x10/0x10 [ 23.750821] mipi_dbi_typec3_command+0x1bc/0x1d0 [mipi_dbi] Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190222124329.23046-1-noralf@tronnes.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/amd/display: Reset alpha state for planes to the correct valuesNicholas Kazlauskas
[ Upstream commit eec3d5efd16d13984a88396b685ae17462fb6d87 ] [Why] The plane_reset callback is subclassed but hasn't been updated since the drm helper got updated to include resetting alpha related state (state->alpha and state->pixel_blend_mode). The overlay planes exposed by amdgpu_dm were therefore being rendered as invisible by default ever since supported was exposed for alpha blending properties on overlays. This caused regressions in igt@kms_plane_multiple@atomic-tiling-none and igt@kms_plane@plane-position-covered-pipe tests. [How] Reset the plane state values to their correct values as defined in the drm helper. This fixes the IGT test regression. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/amd/display: Link train only when link is DP and backend is enabledSamson Tam
[ Upstream commit 66acd4418d7de131ef3831e52a8af3d2480e5b15 ] [Why] In certain cases we do link training when we don't have a backend. [How] In dc_link_set_preferred_link_settings(), store preferred link settings first and then verify that the link is DP and the link stream's backend is enabled. If either is false, then we will not do any link retraining. Signed-off-by: Samson Tam <Samson.Tam@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/amd/display: fix releasing planes when exiting odmDmytro Laktyushkin
[ Upstream commit bc2193992b00488f5734613ac95b78ef2d2803ab ] Releasing planes should not release the 2nd odm pipe right away, this change leaves us with 2 pipes with null planes and same stream when planes are released during odm. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm: rcar-du: lvds: Set LVEN and LVRES bits together on D3Laurent Pinchart
[ Upstream commit 00d082cc4ea6e42ec4fed832a1020231bb1ca150 ] On the D3 SoC the LVDS PHY must be enabled in the same register write that enables the LVDS output. Skip writing the LVEN bit independently on that platform, it will be set by the write that sets LVRES. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/amd/display: Prevent cursor hotspot overflow for RV overlay planesNicholas Kazlauskas
[ Upstream commit 6752bea8b03e77c98be7d8d25b0a9d86a00b3cf7 ] [Why] The actual position for the cursor on the screen is essentially: x_out = x - x_plane - x_hotspot y_out = y - y_plane - y_hotspot The register values for cursor position and cursor hotspot need to be greater than zero when programmed, but we also need to subtract off the plane position to display the cursor at the correct position. Since we don't want x or y to be less than zero, we add the plane position as a positive value to x_hotspot or y_hotspot. However, what this doesn't take into account is that the hotspot registers are limited by the maximum cursor size. On DCN10 the cursor hotspot regitsers are masked to 0xFF, so they have a maximum value of 0-255. Values greater this will wrap, causing the cursor to display in the wrong position. In practice this means that for sufficiently large plane positions, the cursor will be drawn twice on the screen, and can cause screen flashes or p-state WARNS depending on what the wrapped value is. So we need a way to remove the value from x_plane and y_plane without exceeding the maximum cursor size. [How] Subtract as much as x_plane/y_plane as possible from x and y and place the remainder in the cursor hotspot register. The value for x_hotspot and y_hotspot can still wrap around but it won't happen in a case where the cursor is actually enabled. The cursor plane needs to intersect at least one pixel of the plane's rectangle to be enabled, so the cursor position + hotspot provided by userspace must always be strictly less than the maximum cursor size for the cursor to actually be enabled. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/panel: otm8009a: Add delay at the end of initializationYannick Fertré
[ Upstream commit 0084c3c71126fc878c6dab8a6ab8ecc484c2be02 ] At the end of initialization, a delay is required by the panel. Without this delay, the panel could received a frame early & generate a crash of panel (black screen). Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Reviewed-by: Philippe Cornu <philippe.cornu@st.com> Tested-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1553155445-13407-1-git-send-email-yannick.fertre@st.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/pl111: fix possible object reference leakWen Yang
[ Upstream commit bc29d3a69d4c1bd1a103e8b3c1ed81b807c1870b ] The call to of_find_matching_node_and_match returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/gpu/drm/pl111/pl111_versatile.c:333:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:340:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:346:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:354:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:395:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. drivers/gpu/drm/pl111/pl111_versatile.c:402:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 317, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Eric Anholt <eric@anholt.net> (supporter:DRM DRIVER FOR ARM PL111 CLCD) Cc: David Airlie <airlied@linux.ie> (maintainer:DRM DRIVERS) Cc: Daniel Vetter <daniel@ffwll.ch> (maintainer:DRM DRIVERS) Cc: dri-devel@lists.freedesktop.org (open list:DRM DRIVERS) Cc: linux-kernel@vger.kernel.org (open list) Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/1554307455-40361-6-git-send-email-wen.yang99@zte.com.cn Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/amdgpu: fix old fence check in amdgpu_fence_emitChristian König
[ Upstream commit 3d2aca8c8620346abdba96c6300d2c0b90a1d0cc ] We don't hold a reference to the old fence, so it can go away any time we are waiting for it to signal. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Chunming Zhou <david1.zhou@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm: etnaviv: avoid DMA API warning when importing buffersRussell King
[ Upstream commit 1262cc8893ecb0eb2c21e042d0d268cc180edb61 ] During boot, I get this kernel warning: WARNING: CPU: 0 PID: 19001 at kernel/dma/debug.c:1301 debug_dma_map_sg+0x284/0x3dc etnaviv etnaviv: DMA-API: mapping sg segment longer than device claims to support [len=3145728] [max=65536] Modules linked in: ip6t_REJECT nf_reject_ipv6 ip6t_rpfilter xt_tcpudp ipt_REJECT nf_reject_ipv4 xt_conntrack ip_set nfnetlink ebtable_broute ebtable_nat ip6table_raw ip6table_nat nf_nat_ipv6 ip6table_mangle iptable_raw iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv4 nf_defrag_ipv6 libcrc32c iptable_mangle ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter caam_jr error snd_soc_imx_spdif imx_thermal snd_soc_imx_audmux nvmem_imx_ocotp snd_soc_sgtl5000 caam imx_sdma virt_dma coda rc_cec v4l2_mem2mem snd_soc_fsl_ssi snd_soc_fsl_spdif imx_vdoa imx_pcm_dma videobuf2_dma_contig etnaviv dw_hdmi_cec gpu_sched dw_hdmi_ahb_audio imx6q_cpufreq nfsd sch_fq_codel ip_tables x_tables CPU: 0 PID: 19001 Comm: Xorg Not tainted 4.20.0+ #307 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) [<c0019658>] (unwind_backtrace) from [<c001489c>] (show_stack+0x10/0x14) [<c001489c>] (show_stack) from [<c07fb420>] (dump_stack+0x9c/0xd4) [<c07fb420>] (dump_stack) from [<c00312dc>] (__warn+0xf8/0x124) [<c00312dc>] (__warn) from [<c00313d0>] (warn_slowpath_fmt+0x38/0x48) [<c00313d0>] (warn_slowpath_fmt) from [<c00b14e8>] (debug_dma_map_sg+0x284/0x3dc) [<c00b14e8>] (debug_dma_map_sg) from [<c046eb40>] (drm_gem_map_dma_buf+0xc4/0x13c) [<c046eb40>] (drm_gem_map_dma_buf) from [<c04c3314>] (dma_buf_map_attachment+0x38/0x5c) [<c04c3314>] (dma_buf_map_attachment) from [<c046e728>] (drm_gem_prime_import_dev+0x74/0x104) [<c046e728>] (drm_gem_prime_import_dev) from [<c046e5bc>] (drm_gem_prime_fd_to_handle+0x84/0x17c) [<c046e5bc>] (drm_gem_prime_fd_to_handle) from [<c046edd0>] (drm_prime_fd_to_handle_ioctl+0x38/0x4c) [<c046edd0>] (drm_prime_fd_to_handle_ioctl) from [<c0460efc>] (drm_ioctl_kernel+0x90/0xc8) [<c0460efc>] (drm_ioctl_kernel) from [<c0461114>] (drm_ioctl+0x1e0/0x3b0) [<c0461114>] (drm_ioctl) from [<c01cae20>] (do_vfs_ioctl+0x90/0xa48) [<c01cae20>] (do_vfs_ioctl) from [<c01cb80c>] (ksys_ioctl+0x34/0x60) [<c01cb80c>] (ksys_ioctl) from [<c0009000>] (ret_fast_syscall+0x0/0x28) Exception stack(0xd81a9fa8 to 0xd81a9ff0) 9fa0: b6c69c88 bec613f8 00000009 c00c642e bec613f8 b86c4600 9fc0: b6c69c88 bec613f8 c00c642e 00000036 012762e0 01276348 00000300 012d91f8 9fe0: b6989f18 bec613dc b697185c b667be5c irq event stamp: 47905 hardirqs last enabled at (47913): [<c0098824>] console_unlock+0x46c/0x680 hardirqs last disabled at (47922): [<c0098470>] console_unlock+0xb8/0x680 softirqs last enabled at (47754): [<c000a484>] __do_softirq+0x344/0x540 softirqs last disabled at (47701): [<c0038700>] irq_exit+0x124/0x144 ---[ end trace af477747acbcc642 ]--- The reason is the contiguous buffer exceeds the default maximum segment size of 64K as specified by dma_get_max_seg_size() in linux/dma-mapping.h. Fix this by providing our own segment size, which is set to 2GiB to cover the window found in MMUv1 GPUs. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/msm: Fix NULL pointer dereferenceLuca Weiss
[ Upstream commit 7603df38cc8c1e5d540b18ec9eb9d62d823197d0 ] [ 3.707412] Unable to handle kernel NULL pointer dereference at virtual address 0000009c [ 3.714511] pgd = (ptrval) [ 3.722742] [0000009c] *pgd=00000000 [ 3.725238] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 3.728968] Modules linked in: [ 3.734265] CPU: 3 PID: 112 Comm: kworker/3:2 Tainted: G W 5.0.0-rc7-00183-g06a1c31df9eb #4 [ 3.737142] Hardware name: Generic DT based system [ 3.746778] Workqueue: events deferred_probe_work_func [ 3.751542] PC is at msm_gem_map_vma+0x3c/0xac [ 3.756669] LR is at msm_gem_get_and_pin_iova+0xd8/0x134 [ 3.761086] pc : [<c07d3b7c>] lr : [<c07d14f8>] psr: 60000013 [ 3.766560] sp : ee297be8 ip : ed9ab1c0 fp : ed93b800 [ 3.772546] r10: ee35e180 r9 : 00000000 r8 : ee297c80 [ 3.777752] r7 : 00000000 r6 : 7c100000 r5 : 00000000 r4 : ee35e180 [ 3.782968] r3 : 00000001 r2 : 00000003 r1 : ee35e180 r0 : 00000000 [ 3.789562] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 3.796079] Control: 10c5787d Table: 2e3a806a DAC: 00000051 [ 3.803282] Process kworker/3:2 (pid: 112, stack limit = 0x(ptrval)) [ 3.809006] Stack: (0xee297be8 to 0xee298000) [ 3.815445] 7be0: 00000000 c1108c48 eda8c000 00000003 eda8c0fc c1108c48 [ 3.819715] 7c00: eda8c000 00000003 eda8c0fc c07d14f8 00000001 c07d1100 7c100000 00000000 [ 3.827873] 7c20: eda8c000 bb7ffb78 00000000 eda8c000 00000000 00000000 c0c8b1d4 ee3bfa00 [ 3.836037] 7c40: ee3b9800 c07d1684 00000000 c1108c48 ee0d7810 ee3b9800 c0c8b1d4 c07d222c [ 3.844193] 7c60: ee3bfd84 ee297c80 00000000 c0b1d5b0 ee3bfc40 c07dcfd8 ee3bfd84 ee297c80 [ 3.852357] 7c80: 0000006d ee3bfc40 ee0d7810 bb7ffb78 c0c8b1d4 00000000 ee3bfc40 c07ddb48 [ 3.860516] 7ca0: 00002004 c0eba384 ee3bfc40 c079eba0 ee3bd040 ee3b9800 00000001 ed93b800 [ 3.868673] 7cc0: ed9aa100 c07db7e8 ee3bf240 ed9a6500 00000001 ee3b9800 ee3bf2d4 c07a0a30 [ 3.876834] 7ce0: ed93b800 7d100000 c1108c48 ee0d7610 ee3b9800 ed93b800 c1108c48 00000000 [ 3.884991] 7d00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 3.893151] 7d20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 bb7ffb78 [ 3.901310] 7d40: c12113c4 ed93b800 ee3b9800 c1108c48 ee9eec10 00000000 ed93b800 7d100000 [ 3.909472] 7d60: eff7b000 c07cf748 7d100000 00000000 c0e9a350 c0b1d5b0 c12113c4 c0961e40 [ 3.917633] 7d80: c12113c4 40000113 eeff4bec c0ebe004 00000019 c0b1d230 ee9eeda8 60000113 [ 3.925791] 7da0: ee35d300 ee9eeda8 c07ce260 bb7ffb78 c07ce260 ee35d2c0 00000028 00000002 [ 3.933950] 7dc0: eeb76280 c118f884 ee0be640 c11c6128 c07ce260 c07ea4ac 00000000 c0962b48 [ 3.942108] 7de0: c118f868 00000001 c0ebbc98 ee35d2c0 00000000 eeb76280 00000000 c118f87c [ 3.950270] 7e00: ee35d2c0 00000000 c11c63e0 c118f694 00000019 c07ea5d0 ee0d7810 00000000 [ 3.958430] 7e20: c118f694 00000000 00000000 c07f2b0c c120f55c ee0d7810 c120f560 00000000 [ 3.966590] 7e40: 00000000 c07f08c4 c07f0e8c ee0d7810 c11ba3d0 ee0d7810 c118f694 c07f0e8c [ 3.974748] 7e60: c1108c48 00000001 c0ebc3cc c11c63f8 c11ba3d0 c07f0c08 00000001 c07f2f8c [ 3.982908] 7e80: c118f694 00000000 ee297ed4 c07f0e8c c1108c48 00000001 c0ebc3cc c11c63f8 [ 3.991068] 7ea0: c11ba3d0 c07ee8a0 c11ba3d0 ee82686c ee0baf38 bb7ffb78 ee0d7810 ee0d7810 [ 3.999227] 7ec0: c1108c48 ee0d7844 c118faac c07f05b0 ee0d7810 ee0d7810 00000001 bb7ffb78 [ 4.007389] 7ee0: ee0d7810 ee0d7810 c118fd18 c118faac c11c63e0 c07ef7d0 ee0d7810 c118fa90 [ 4.015548] 7f00: c118fa90 c07efd68 c118fac8 ee27fe00 eefd9c80 eefdcd00 00000000 c118facc [ 4.023708] 7f20: 00000000 c033c038 eefd9c80 eefd9c80 00000008 ee27fe00 ee27fe14 eefd9c80 [ 4.031866] 7f40: 00000008 c1103d00 eefd9c98 ee296000 eefd9c80 c033ce54 ee907eac c0b1d230 [ 4.040026] 7f60: ee907eac eea24440 ee285000 00000000 ee296000 ee27fe00 c033ce24 eea2445c [ 4.048188] 7f80: ee907eac c0341db0 00000000 ee285000 c0341c8c 00000000 00000000 00000000 [ 4.056346] 7fa0: 00000000 00000000 00000000 c03010e8 00000000 00000000 00000000 00000000 [ 4.064505] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.072665] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 4.080828] [<c07d3b7c>] (msm_gem_map_vma) from [<c07d14f8>] (msm_gem_get_and_pin_iova+0xd8/0x134) [ 4.088983] [<c07d14f8>] (msm_gem_get_and_pin_iova) from [<c07d1684>] (_msm_gem_kernel_new+0x38/0xac) [ 4.097839] [<c07d1684>] (_msm_gem_kernel_new) from [<c07d222c>] (msm_gem_kernel_new+0x24/0x2c) [ 4.107130] [<c07d222c>] (msm_gem_kernel_new) from [<c07dcfd8>] (dsi_tx_buf_alloc_6g+0x44/0x90) [ 4.115631] [<c07dcfd8>] (dsi_tx_buf_alloc_6g) from [<c07ddb48>] (msm_dsi_host_modeset_init+0x80/0x104) [ 4.124313] [<c07ddb48>] (msm_dsi_host_modeset_init) from [<c07db7e8>] (msm_dsi_modeset_init+0x34/0x1c0) [ 4.133691] [<c07db7e8>] (msm_dsi_modeset_init) from [<c07a0a30>] (mdp5_kms_init+0x764/0x7e0) [ 4.143409] [<c07a0a30>] (mdp5_kms_init) from [<c07cf748>] (msm_drm_bind+0x56c/0x740) [ 4.151824] [<c07cf748>] (msm_drm_bind) from [<c07ea4ac>] (try_to_bring_up_master+0x238/0x2b4) [ 4.159636] [<c07ea4ac>] (try_to_bring_up_master) from [<c07ea5d0>] (component_add+0xa8/0x170) [ 4.168146] [<c07ea5d0>] (component_add) from [<c07f2b0c>] (platform_drv_probe+0x48/0x9c) [ 4.176737] [<c07f2b0c>] (platform_drv_probe) from [<c07f08c4>] (really_probe+0x278/0x404) [ 4.184981] [<c07f08c4>] (really_probe) from [<c07f0c08>] (driver_probe_device+0x78/0x1c0) [ 4.193147] [<c07f0c08>] (driver_probe_device) from [<c07ee8a0>] (bus_for_each_drv+0x74/0xb8) [ 4.201389] [<c07ee8a0>] (bus_for_each_drv) from [<c07f05b0>] (__device_attach+0xd0/0x164) [ 4.209984] [<c07f05b0>] (__device_attach) from [<c07ef7d0>] (bus_probe_device+0x84/0x8c) [ 4.218143] [<c07ef7d0>] (bus_probe_device) from [<c07efd68>] (deferred_probe_work_func+0x48/0xc4) [ 4.226398] [<c07efd68>] (deferred_probe_work_func) from [<c033c038>] (process_one_work+0x204/0x574) [ 4.235254] [<c033c038>] (process_one_work) from [<c033ce54>] (worker_thread+0x30/0x560) [ 4.244534] [<c033ce54>] (worker_thread) from [<c0341db0>] (kthread+0x124/0x154) [ 4.252606] [<c0341db0>] (kthread) from [<c03010e8>] (ret_from_fork+0x14/0x2c) [ 4.259966] Exception stack(0xee297fb0 to 0xee297ff8) [ 4.266998] 7fa0: 00000000 00000000 00000000 00000000 [ 4.272143] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 4.280297] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 4.288451] Code: e5813080 1a000013 e3a03001 e5c4307c (e590009c) [ 4.294933] ---[ end trace 18729cc2bca2b4b3 ]--- Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/msm: dpu: Don't set frame_busy_mask for async updatesSean Paul
[ Upstream commit f98baa3109cea46083d2361ab14a0207d1b1bd16 ] The frame_busy mask is used in frame_done event handling, which is not invoked for async commits. So an async commit will leave the frame_busy mask populated after it completes and future commits will start with the busy mask incorrect. This showed up on disable after cursor move. I was hitting the "this should not happen" comment in the frame event worker since frame_busy was set, we queued the event, but there were no frames pending (since async also doesn't set that). Reviewed-by: Fritz Koenig <frkoenig@google.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190130163220.138637-1-sean@poorly.run Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/msm: a5xx: fix possible object reference leakWen Yang
[ Upstream commit 6cd5235c3135ea84b32469ea51b2aae384eda8af ] The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/gpu/drm/msm/adreno/a5xx_gpu.c:57:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:66:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:118:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 47, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:57:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:66:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function. drivers/gpu/drm/msm/adreno/a5xx_gpu.c:118:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 51, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Rob Clark <robdclark@gmail.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jordan Crouse <jcrouse@codeaurora.org> Cc: Mamta Shukla <mamtashukla555@gmail.com> Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Sharat Masetty <smasetty@codeaurora.org> Cc: linux-arm-msm@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: freedreno@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org (open list) Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org> Signed-off-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/msm/dpu: release resources on modeset failureJeykumar Sankaran
[ Upstream commit a7fcc3237f31a4e206953bb73cf41bd429442f09 ] release resources allocated in mode_set if any of the hw check fails. Most of these checks are not necessary and they will be removed in the follow up patches with state based resource allocations. Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1550107156-17625-4-git-send-email-jsanka@codeaurora.org Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-31drm/nouveau/bar/nv50: ensure BAR is mappedJon Derrick
[ Upstream commit f10b83de1fd49216a4c657816f48001437e4bdd5 ] If the BAR is zero size, it indicates it was never successfully mapped. Ensure that the BAR is valid during initialization before attempting to use it. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16drm/rockchip: fix for mailbox read validation.Damian Kos
[ Upstream commit e4056bbb6719fe713bfc4030ac78e8e97ddf7574 ] This is basically the same fix as in commit fa68d4f8476b ("drm/rockchip: fix for mailbox read size") but for cdn_dp_mailbox_validate_receive function. See patchwork.kernel.org/patch/10671981/ for details. Signed-off-by: Damian Kos <dkos@cadence.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/1542640463-18332-1-git-send-email-dkos@cadence.com Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
2019-05-16drm/sun4i: Unbind components before releasing DRM and memoryPaul Kocialkowski
[ Upstream commit e02bc29b2cfa7806830d6da8b2322cddd67e8dfe ] Our components may still be using the DRM device driver (if only to access our driver's private data), so make sure to unbind them before the final drm_dev_put. Also release our reserved memory after component unbind instead of before to match reverse creation order. Fixes: f5a9ed867c83 ("drm/sun4i: Fix component unbinding and component master deletion") Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190424090413.6918-1-paul.kocialkowski@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16Revert "drm/virtio: drop prime import/export callbacks"Dave Airlie
[ Upstream commit a0cecc23cfcbf2626497a8c8770856dd56b67917 ] This patch does more harm than good, as it breaks both Xwayland and gnome-shell with X11. Xwayland requires DRI3 & DRI3 requires PRIME. X11 crash for obscure double-free reason which are hard to debug (starting X11 by hand doesn't trigger the crash). I don't see an apparent problem implementing those stub prime functions, they may return an error at run-time, and it seems to be handled fine by GNOME at least. This reverts commit b318e3ff7ca065d6b107e424c85a63d7a6798a69. [airlied: This broke userspace for virtio-gpus, and regressed things from DRI3 to DRI2. This brings back the original problem, but it's better than regressions.] Fixes: b318e3ff7ca065d6b107e424c85a63d7a6798a ("drm/virtio: drop prime import/export callbacks") Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16drm/imx: don't skip DP channel disable for background planeLucas Stach
[ Upstream commit 7bcde275eb1d0ac8793c77c7e666a886eb16633d ] In order to make sure that the plane color space gets reset correctly. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16gpu: ipu-v3: dp: fix CSC handlingLucas Stach
[ Upstream commit d4fad0a426c6e26f48c9a7cdd21a7fe9c198d645 ] Initialize the flow input colorspaces to unknown and reset to that value when the channel gets disabled. This avoids the state getting mixed up with a previous mode. Also keep the CSC settings for the background flow intact when disabling the foreground flow. Root-caused-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16drm/sun4i: Fix component unbinding and component master deletionPaul Kocialkowski
[ Upstream commit f5a9ed867c83875546c9aadd4ed8e785e9adcc3c ] For our component-backed driver to be properly removed, we need to delete the component master in sun4i_drv_remove and make sure to call component_unbind_all in the master's unbind so that all components are unbound when the master is. Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190418132727.5128-4-paul.kocialkowski@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16drm/sun4i: Set device driver data at bind time for use in unbindPaul Kocialkowski
[ Upstream commit 02b92adbe33e6dbd15dc6e32540b22f47c4ff0a2 ] Our sun4i_drv_unbind gets the drm device using dev_get_drvdata. However, that driver data is never set in sun4i_drv_bind. Set it there to avoid getting a NULL pointer at unbind time. Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190418132727.5128-3-paul.kocialkowski@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16drm: bridge: dw-hdmi: Fix overflow workaround for Rockchip SoCsJonas Karlman
[ Upstream commit d15d9fd02575ecfada92d42f655940c4f10af842 ] The Rockchip RK3288 SoC (v2.00a) and RK3328/RK3399 SoCs (v2.11a) have also been identified as needing this workaround with a single iteration. Fixes: be41fc55f1aa ("drm: bridge: dw-hdmi: Handle overflow workaround based on device version") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Tested-by: Heiko Stueber <heiko@sntech.de> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/AM3PR03MB0966818FAAAE6192FF4ED11AAC7D0@AM3PR03MB0966.eurprd03.prod.outlook.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16drm/amd/display: If one stream full updates, full update all planesDavid Francis
[ Upstream commit c238bfe0be9ef7420f7669a69e27c8c8f4d8a568 ] [Why] On some compositors, with two monitors attached, VT terminal switch can cause a graphical issue by the following means: There are two streams, one for each monitor. Each stream has one plane current state: M1:S1->P1 M2:S2->P2 The user calls for a terminal switch and a commit is made to change both planes to linear swizzle mode. In atomic check, a new dc_state is constructed with new planes on each stream new state: M1:S1->P3 M2:S2->P4 In commit tail, each stream is committed, one at a time. The first stream (S1) updates properly, triggerring a full update and replacing the state current state: M1:S1->P3 M2:S2->P4 The update for S2 comes in, but dc detects that there is no difference between the stream and plane in the new and current states, and so triggers a fast update. The fast update does not program swizzle, so the second monitor is corrupted [How] Add a flag to dc_plane_state that forces full updates When a stream undergoes a full update, set this flag on all changed planes, then clear it on the current stream Subsequent streams will get full updates as a result Signed-off-by: David Francis <David.Francis@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Bhawanpreet Lakha <Bhawanpreet Lakha@amd.com> Acked-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16drm/amdgpu: shadow in shadow_list without tbo.mem.start cause page fault in ↵wentalou
sriov TDR [ Upstream commit b575f10dbd6f84c2c8744ff1f486bfae1e4f6f38 ] shadow was added into shadow_list by amdgpu_bo_create_shadow. meanwhile, shadow->tbo.mem was not fully configured. tbo.mem would be fully configured by amdgpu_vm_sdma_map_table until calling amdgpu_vm_clear_bo. If sriov TDR occurred between amdgpu_bo_create_shadow and amdgpu_vm_sdma_map_table, amdgpu_device_recover_vram would deal with shadow without tbo.mem.start. Signed-off-by: Wentao Lou <Wentao.Lou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16drm/amd/display: extending AUX SW TimeoutMartin Leung
[ Upstream commit f4bbebf8e7eb4d294b040ab2d2ba71e70e69b930 ] [Why] AUX takes longer to reply when using active DP-DVI dongle on some asics resulting in up to 2000+ us edid read (timeout). [How] 1. Adjust AUX poll to match spec 2. Extend the SW timeout. This does not affect normal operation since we exit the loop as soon as AUX acks. Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Leo Li <sunpeng.li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-16drm/ttm: fix dma_fence refcount imbalance on error pathLin Yi
[ Upstream commit 543c364d8eeeb42c0edfaac9764f4e9f3d777ec1 ] the ttm_bo_add_move_fence takes a reference to the struct dma_fence, but failed to release it on the error path, leading to a memory leak. add dma_fence_put before return when error occur. Signed-off-by: Lin Yi <teroincn@163.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-10drm/mediatek: no change parent rate in round_rate() for MT2701 hdmi phyWangyan Wang
[ Upstream commit 9ee76098a1b8ae21cccac641b735ee4d3a77bccf ] This is the third step to make MT2701 HDMI stable. We should not change the rate of parent for hdmi phy when doing round_rate for this clock. The parent clock of hdmi phy must be the same as it. We change it when doing set_rate only. Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-10drm/mediatek: using new factor for tvdpll for MT2701 hdmi phyWangyan Wang
[ Upstream commit 8eeb3946feeb00486ac0909e2309da87db8988a5 ] This is the second step to make MT2701 HDMI stable. The factor depends on the divider of DPI in MT2701, therefore, we should fix this factor to the right and new one. Test: search ok Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-10drm/mediatek: remove flag CLK_SET_RATE_PARENT for MT2701 hdmi phyWangyan Wang
[ Upstream commit 827abdd024207146822f66ba3ba74867135866b9 ] This is the first step to make MT2701 hdmi stable. The parent rate of hdmi phy had set by DPI driver. We should not set or change the parent rate of MT2701 hdmi phy, as a result we should remove the flags of "CLK_SET_RATE_PARENT" from the clock of MT2701 hdmi phy. Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-10drm/mediatek: make implementation of recalc_rate() for MT2701 hdmi phyWangyan Wang
[ Upstream commit 321b628e6f5a3af999f75eadd373adbcb8b4cb1f ] Recalculate the rate of this clock, by querying hardware to make implementation of recalc_rate() to match the definition. Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-10drm/mediatek: fix the rate and divder of hdmi phy for MT2701Wangyan Wang
[ Upstream commit 0c24613cda163dedfa229afc8eff6072e57fac8d ] Due to a clerical error,there is one zero less for 12800000. Fix it for 128000000 Fixes: 0fc721b2968e ("drm/mediatek: add hdmi driver for MT2701 and MT7623") Signed-off-by: Wangyan Wang <wangyan.wang@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-10drm/mediatek: fix possible object reference leakWen Yang
[ Upstream commit 2ae2c3316fb77dcf64275d011596b60104c45426 ] The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: drivers/gpu/drm/mediatek/mtk_hdmi.c:1521:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1509, but without a corresponding object release within this function. drivers/gpu/drm/mediatek/mtk_hdmi.c:1524:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1509, but without a corresponding object release within this function. Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-mediatek@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-10drm/sun4i: tcon top: Fix NULL/invalid pointer dereference in ↵Ondrej Jirman
sun8i_tcon_top_un/bind [ Upstream commit 1a07a94b47b1f528f39c3e6187b5eaf02efe44ea ] There are two problems here: 1. Not all clk_data->hws[] need to be initialized, depending on various configured quirks. This leads to NULL ptr deref in clk_hw_unregister_gate() in sun8i_tcon_top_unbind() 2. If there is error when registering the clk_data->hws[], err_unregister_gates error path will try to unregister IS_ERR()=true (invalid) pointer. For problem (1) I have this stack trace: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 Call trace: clk_hw_unregister+0x8/0x18 clk_hw_unregister_gate+0x14/0x28 sun8i_tcon_top_unbind+0x2c/0x60 component_unbind.isra.4+0x2c/0x50 component_bind_all+0x1d4/0x230 sun4i_drv_bind+0xc4/0x1a0 try_to_bring_up_master+0x164/0x1c0 __component_add+0xa0/0x168 component_add+0x10/0x18 sun8i_dw_hdmi_probe+0x18/0x20 platform_drv_probe+0x3c/0x70 really_probe+0xcc/0x278 driver_probe_device+0x34/0xa8 Problem (2) was identified by head scratching. Signed-off-by: Ondrej Jirman <megous@megous.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190405233048.3823-1-megous@megous.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-10drm/amd/display: fix cursor black issuetiancyin
[ Upstream commit c1cefe115d1cdc460014483319d440b2f0d07c68 ] [Why] the member sdr_white_level of struct dc_cursor_attributes was not initialized, then the random value result that dcn10_set_cursor_sdr_white_level() set error hw_scale value 0x20D9(normal value is 0x3c00), this cause the black cursor issue. [how] just initilize the obj of struct dc_cursor_attributes to zero to avoid the random value. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Tianci Yin <tianci.yin@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-10drm/amdgpu: amdgpu_device_recover_vram always failed if only one node in ↵wentalou
shadow_list [ Upstream commit 1712fb1a2f6829150032ac76eb0e39b82a549cfb ] amdgpu_bo_restore_shadow would assign zero to r if succeeded. r would remain zero if there is only one node in shadow_list. current code would always return failure when r <= 0. restart the timeout for each wait was a rather problematic bug as well. The value of tmo SHOULD be changed, otherwise we wait tmo jiffies on each loop. Signed-off-by: Wentao Lou <Wentao.Lou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-10drm/amdgpu: Adjust IB test timeout for XGMI configurationshaoyunl
[ Upstream commit d4162c61e253177936fcfe6c29f7b224d9a1efb8 ] On XGMI configuration the ib test may take longer to finish Signed-off-by: shaoyunl <shaoyun.liu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-10drm/amdkfd: Add picasso pci idAlex Deucher
[ Upstream commit e7ad88553aa1d48e950ca9a4934d246c1bee4be4 ] Picasso is a new raven variant. Reviewed-by: Kent Russell <kent.russell@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-05-10drm/mediatek: Fix an error code in mtk_hdmi_dt_parse_pdata()Dan Carpenter
[ Upstream commit 2d85978341e6a32e7443d9f28639da254d53f400 ] We don't want to overwrite "ret", it already holds the correct error code. The "regmap" variable might be a valid pointer as this point. Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2026-08-28 16:13:45 +0000