| Age | Commit message (Collapse) | Author |
|
[WHY&HOW]
Cleanup calculations based on version to improve for future
expansion.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
When generating the default LRC, if a register is not masked, we apply
any save-restore programming necessary via a read-modify-write sequence
that will ensure we only update the relevant bits/fields without
clobbering the rest of the register. However some of the registers that
need to be updated might be MCR registers which require steering to a
non-terminated instance to ensure we can read back a valid, non-zero
value. The steering of reads originating from a command streamer is
controlled by register CS_MMIO_GROUP_INSTANCE_SELECT. Emit additional
MI_LRI commands to update the steering before any RMW of an MCR register
to ensure the reads are performed properly.
Note that needing to perform a RMW of an MCR register while building the
default LRC is pretty rare. Most of the MCR registers that are part of
an engine's LRCs are also masked registers, so no MCR is necessary.
Fixes: f2f90989ccff ("drm/xe: Avoid reading RMW registers in emit_wa_job")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patch.msgid.link/20260206223058.387014-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 6c2e331c915ba9e774aa847921262805feb00863)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Implement per-fence spinlocks, allowing implementations to not give an
external spinlock to protect the fence internal state. Instead a spinlock
embedded into the fence structure itself is used in this case.
Shared spinlocks have the problem that implementations need to guarantee
that the lock lives at least as long all fences referencing them.
Using a per-fence spinlock allows completely decoupling spinlock producer
and consumer life times, simplifying the handling in most use cases.
v2: improve naming, coverage and function documentation
v3: fix one additional locking in the selftests
v4: separate out some changes to make the patch smaller,
fix one amdgpu crash found by CI systems
v5: improve comments
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/r/20260219160822.1529-5-christian.koenig@amd.com
|
|
Add dma_fence_lock_irqsafe() and dma_fence_unlock_irqrestore() wrappers
and mechanically apply them everywhere.
Just a pre-requisite cleanup for a follow up patch.
v2: add some missing i915 bits, add abstraction for lockdep assertion as
well
v3: one more suggestion by Tvrtko
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20260219160822.1529-4-christian.koenig@amd.com
|
|
The fence ops of a dma_fence currently need to life as long as the
dma_fence is alive. This means that the module which originally issued
a dma_fence can't unload unless all fences are freed up.
As first step to solve this issue protect the fence ops by RCU.
While it is counter intuitive to protect a constant function pointer table
by RCU it allows modules to wait for an RCU grace period before they
unload, to make sure that nobody is executing their functions any more.
This patch has not much functional change, but only adds the RCU
handling for the static checker to test.
v2: make one the now duplicated lockdep warnings a comment instead.
v3: Add more documentation to ->wait and ->release callback.
v4: fix typo in documentation
v5: rebased on drm-tip
v6: improve code comments
v7: improve commit message and code comments
v8: fix sparse rcu warnings
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://lore.kernel.org/r/20260219160822.1529-2-christian.koenig@amd.com
|
|
Let's merge 7.0-rc1 to start the new drm-misc-next window
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
PORT_ALPM_CTL is supposed to be written only before link training. Remove
writing it from ALPM disable.
Also clearing ALPM_CTL_ALPM_AUX_LESS_ENABLE and is not about disabling ALPM
but switching to AUX-Wake ALPM. Stop touching this bit on ALPM disable.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7153
Fixes: 1ccbf135862b ("drm/i915/psr: Enable ALPM on source side for eDP Panel replay")
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20260212062731.397801-1-jouni.hogander@intel.com
(cherry picked from commit 008304c9ae75c772d3460040de56e12112cdf5e6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done.
We need to handle the two cases: when a panel is found and when it isn't,
even though the latter is not supported. So:
* in case a panel is not found and bridge is, get a reference to the
found bridge
* in case a panel is found, get a reference to the panel_bridge when it
is added, so the following code always get exactly one reference that
it needs to put
Finally, use the next_bridge pointer in struct drm_bridge in order to
simplify putting the reference.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260131-drm-bridge-alloc-getput-drm_of_find_bridge-4-v2-4-e081bcdc1467@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
mcde_dsi_bind() has a loop over all subnodes looking for a panel, but does
not exit when a match is found and only stores the last match. However this
will be problematic when introducing refcounting on the struct drm_device
pointer in a following commit, because of_drm_find_and_get_bridge() would
get a reference to multiple bridges.
There seem to be no real reason for looking for multiple panels, so just
break as soon as a match is found.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260131-drm-bridge-alloc-getput-drm_of_find_bridge-4-v2-3-e081bcdc1467@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
7.0-rc1 was just released, let's merge it to kick the new release cycle.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The DisplayPort of the RK3576 is basically the same as that of the
RK3588, but it operates in dual-pixel mode and also support MST.
This patch only enable the SST output now.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260206010421.443605-5-andyshrk@163.com
|
|
The i2s/spdif clk are mandatory for rk3588, but not used
for the upcoming rk3576, so make it optional here.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260206010421.443605-4-andyshrk@163.com
|
|
In the implementation and integration of the SoC, the DW DisplayPort
hardware block can be configured to work in single, dual, quad pixel
mode on differnt platforms, so make the pixel mode set by plat_data
to support the upcoming rk3576 variant.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260206010421.443605-3-andyshrk@163.com
|
|
Replace deprecated DRM_DEV_ERROR() with drm_err_ratelimited() in the VOP2
register wait timeout paths to align with current DRM logging helpers and
avoid flooding the kernel log when timeouts repeat.
Signed-off-by: Hsieh Hung-En <hungen3108@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260209161621.6136-1-hungen3108@gmail.com
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Pull drm fixes from Dave Airlie:
"This is the fixes and cleanups for the end of the merge window, it's
nearly all amdgpu, with some amdkfd, then a pagemap core fix, i915/xe
display fixes, and some xe driver fixes.
Nothing seems out of the ordinary, except amdgpu is a little more
volume than usual.
pagemap:
- drm/pagemap: pass pagemap_addr by reference
amdgpu:
- DML 2.1 fixes
- Panel replay fixes
- Display writeback fixes
- MES 11 old firmware compat fix
- DC CRC improvements
- DPIA fixes
- XGMI fixes
- ASPM fix
- SMU feature bit handling fixes
- DC LUT fixes
- RAS fixes
- Misc memory leak in error path fixes
- SDMA queue reset fixes
- PG handling fixes
- 5 level GPUVM page table fix
- SR-IOV fix
- Queue reset fix
- SMU 13.x fixes
- DC resume lag fix
- MPO fixes
- DCN 3.6 fix
- VSDB fixes
- HWSS clean up
- Replay fixes
- DCE cursor fixes
- DCN 3.5 SR DDR5 latency fixes
- HPD fixes
- Error path unwind fixes
- SMU13/14 mode1 reset fixes
- PSP 15 updates
- SMU 15 updates
- Sync fix in amdgpu_dma_buf_move_notify()
- HAINAN fix
- PSP 13.x fix
- GPUVM locking fix
- Fixes for DC analog support
- DC FAMS fixes
- DML 2.1 fixes
- eDP fixes
- Misc DC fixes
- Fastboot fix
- 3DLUT fixes
- GPUVM fixes
- 64bpp format fix
- Fix for MacBooks with switchable gfx
amdkfd:
- Fix possible double deletion of validate list
- Event setup fix
- Device disconnect regression fix
- APU GTT as VRAM fix
- Fix piority inversion with MQDs
- NULL check fix
radeon:
- HAINAN fix
i915/xe display:
- Regresion fix for HDR 4k displays (#15503)
- Fixup for Dell XPS 13 7390 eDP rate limit
- Memory leak fix on ACPI _DSM handling
- Add missing slice count check during DP mode validation
xe:
- drm/xe: Prevent VFs from exposing the CCS mode sysfs file
- SRIOV related fixes
- PAT cache fix
- MMIO read fix
- W/a fixes
- Adjust type of xe_modparam.force_vram_bar_size
- Wedge mode fix
- HWMon fix
* tag 'drm-next-2026-02-21' of https://gitlab.freedesktop.org/drm/kernel: (143 commits)
drm/amd/display: Remove unneeded DAC link encoder register
drm/amd/display: Enable DAC in DCE link encoder
drm/amd/display: Set CRTC source for DAC using registers
drm/amd/display: Initialize DAC in DCE link encoder using VBIOS
drm/amd/display: Turn off DAC in DCE link encoder using VBIOS
drm/amd/display: Don't call find_analog_engine() twice
drm/amdgpu: fix 4-level paging if GMC supports 57-bit VA v2
drm/amdgpu: keep vga memory on MacBooks with switchable graphics
drm/amdgpu: Set atomics to true for xgmi
drm/amdkfd: Check for NULL return values
drm/amd/display: Use same max plane scaling limits for all 64 bpp formats
drm/amdgpu: Set vmid0 PAGE_TABLE_DEPTH for GFX12.1
drm/amdkfd: Disable MQD queue priority
drm/amd/display: Remove conditional for shaper 3DLUT power-on
drm/amd/display: Check return of shaper curve to HW format
drm/amd/display: Correct logic check error for fastboot
drm/amd/display: Skip eDP detection when no sink
Revert "drm/amd/display: Add Gfx Base Case For Linear Tiling Handling"
Revert "drm/amd/display: Correct hubp GfxVersion verification"
Revert "drm/amd/display: Add Handling for gfxversion DcGfxBase"
...
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- drm/xe: Prevent VFs from exposing the CCS mode sysfs file (Nareshkumar)
Cross-subsystem Changes:
- drm/pagemap: pass pagemap_addr by reference (Arnd)
Driver Changes:
- SRIOV related fixes (Michal, Piotr)
- PAT cache fix (Jia)
- MMIO read fix (Shuicheng)
- W/a fixes (Roper)
- Adjust type of xe_modparam.force_vram_bar_size (Shuicheng)
- Wedge mode fix (Raag)
- HWMon fix (Karthik)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/aZeR6CXDRbeudIVR@intel.com
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
- Add missing slice count check during DP mode validation
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patch.msgid.link/aZgb43cDcTPBYssk@jlahtine-mobl
|
|
Annotate the SA manager init path to model taking swap_guard while under
reclaim context. This helps lockdep catch potential circular dependencies
between fs_reclaim and swap_guard in debug builds. Without this annotation,
lockdep is unaware of this chain until the shrinker runs.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260220055519.2485681-8-satyanarayana.k.v.p@intel.com
|
|
CCS save/restore batch buffers are attached during BO allocation and
detached during BO teardown. The shrinker triggers xe_bo_move(), which is
used for both allocation and deletion paths.
When BO allocation and shrinking occur concurrently, a circular locking
dependency involving fs_reclaim and swap_guard can occur, leading to a
deadlock such as:
*===============================================================*
* WARNING: possible circular locking dependency detected *
*---------------------------------------------------------------*
* *
* CPU0 CPU1 *
* ---- ---- *
* lock(fs_reclaim); *
* lock(&sa_manager->swap_guard); *
* lock(fs_reclaim); *
* lock(&sa_manager->swap_guard); *
* *
* *** DEADLOCK *** *
*===============================================================*
To avoid this, the BB pointer and SA are allocated using xe_bb_alloc()
before taking lock and SA is initialized using xe_bb_init() preventing
reclaim from being invoked in this context.
Fixes: 864690cf4dd62 ("drm/xe/vf: Attach and detach CCS copy commands with BO")
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260220055519.2485681-7-satyanarayana.k.v.p@intel.com
|
|
drm_suballoc_new() currently both allocates the SA object using kmalloc()
and searches for a suitable hole in the sub-allocator for the requested
size. If SA allocation is done by holding sub-allocator mutex, this design
can lead to reclaim safety issues.
By splitting the kmalloc() step outside of the critical section, we allow
the memory allocation to use GFP_KERNEL (reclaim-safe) while ensuring that
the initialization step that holds reclaim-tainted locks (sub-allocator
mutex) operates in a reclaim-unsafe context with pre-allocated memory.
This separation prevents potential deadlocks where memory reclaim could
attempt to acquire locks that are already held during the sub-allocator
operations.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260220055519.2485681-6-satyanarayana.k.v.p@intel.com
|
|
When dma_fence_chain_alloc() fails, properly release the user fence
reference to prevent a memory leak.
Fixes: adda4e855ab6 ("drm/xe: Enforce correct user fence signaling order using")
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260219233516.2938172-6-shuicheng.lin@intel.com
|
|
xe_sync_entry_parse() can allocate references (syncobj, fence, chain fence,
or user fence) before hitting a later failure path. Several of those paths
returned directly, leaving partially initialized state and leaking refs.
Route these error paths through a common free_sync label and call
xe_sync_entry_cleanup(sync) before returning the error.
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260219233516.2938172-5-shuicheng.lin@intel.com
|
|
In case VF's VRAM provisioning using sysfs is done by the admin
prior to VFs enabling, this provisioning will be lost as PF will
run VRAM auto-provisioning anyway. To avoid that skip this auto-
provisioning if any VF has been already provisioned with VRAM.
To help admin find any mistakes, add diagnostics messages about
which VFs were provisioned with VRAM and which were missed.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260218205553.3561-10-michal.wajdeczko@intel.com
|
|
We will add more code there and with guard() it will easier to
avoid mistakes in unlocking.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260218205553.3561-9-michal.wajdeczko@intel.com
|
|
We already turn off VFs auto-provisioning once we detect manual VFs
provisioning over the debugfs, so we can skip additional check for
all VFs configs being still empty.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260218205553.3561-8-michal.wajdeczko@intel.com
|
|
Add basic test cases to check outcome of the fair VRAM provisioning
for regular and admin-only PF mode.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260218205553.3561-7-michal.wajdeczko@intel.com
|
|
Instead of trying very hard to find the largest fair VRAM (aka LMEM)
size that could be allocated for VFs on the current tile, pick some
smaller rounded down to power-of-two value that is more likely to be
provisioned in the same manner by the other PF instances.
In some cases, the outcome of above calculation might not be optimal,
but it's expected that admin will do fine-tuning using sysfs files.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260218205553.3561-6-michal.wajdeczko@intel.com
|
|
On current discrete platforms, PF will provision all VFs with a fair
amount of the VRAM (LMEM) during VFs enabling. However, in some cases
this automatic VRAM provisioning might be either non-reproducible or
sub-optimal. This could break VF's migration or impact performance.
Expose per-VF VRAM quota read-write sysfs attributes to allow admin
change default VRAM provisioning performed by the PF.
/sys/bus/pci/drivers/xe/BDF/
├── sriov_admin/
├── .bulk_profile
│ └── vram_quota [RW] unsigned integer
├── vf1/
│ └── profile
│ └── vram_quota [RW] unsigned integer
├── vf2/
│ └── profile
│ └── vram_quota [RW] unsigned integer
Above values represent total provisioned VRAM from all tiles where
VFs were assigned, and currently it's from all tiles always.
Note that changing VRAM provisioning is only possible when VF is
not running, otherwise GuC will complain. To make sure that given
VF is idle, triggering VF FLR might be needed.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/20260218205553.3561-5-michal.wajdeczko@intel.com
|
|
We already have functions to configure VF LMEM (aka VRAM) on the
tile/GT level, used by the auto-provisioning and debugfs, but we
also need functions that will work on the device level that will
configure VRAM on all tiles at once.
We will use these new functions in upcoming patch.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260218205553.3561-4-michal.wajdeczko@intel.com
|
|
We already have few functions to configure LMEM (aka VRAM) but they
all are taking master mutex. Split them and expose locked variants
to allow use by the caller who already hold this mutex.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260218205553.3561-3-michal.wajdeczko@intel.com
|
|
The underlying LMTT implementation already provides the info about
the page size it is using. There is no need to have a separate
helper function that is making assumption about the required size.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patch.msgid.link/20260218205553.3561-2-michal.wajdeczko@intel.com
|
|
Add fields and constants for coreboot framebuffer orientation. Set
corebootdrm's DRM connector state from the values. Not all firmware
provides orientation, so make it optional. Systems without, continue
to use unknown orientation.
v3:
- comment on _HAS_ORIENTATION semantics (Tzung-Bi)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Julius Werner <jwerner@chromium.org>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org> # coreboot
Link: https://patch.msgid.link/20260217155836.96267-13-tzimmermann@suse.de
|
|
Add corebootdrm, a DRM driver for coreboot framebuffers. The driver
supports a pre-initialized framebuffer with various packed RGB formats.
The driver code is fairly small and uses the same logic as the other
sysfb drivers. Most of the implementation comes from existing sysfb
helpers.
Until now, coreboot relied on simpledrm or simplefb for boot-up graphics
output. Initialize the platform device for corebootdrm in the same place
in framebuffer_probe(). With a later commit, the simple-framebuffer should
be removed.
v4:
- sort include statements (Tzung-Bi)
v3:
- comment on _HAS_LFB semantics (Tzung-Bi)
- fix typo in commit description (Tzung-Bi)
- comment on simple-framebuffer being obsolete for coreboot
v2:
- reimplement as platform driver
- limit resources and mappings to known framebuffer memory; no
page alignment
- create corebootdrm device from coreboot framebuffer code
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Julius Werner <jwerner@chromium.org>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org> # coreboot
Link: https://patch.msgid.link/20260217155836.96267-12-tzimmermann@suse.de
|
|
Provide drm_sysfb_get_format(), a helper that finds a specific DRM
format from a list of pixel formats. The new function builds upon
drm_sysfb_get_format_si(), which finds the DRM format from a given
instance of struct screen_info. Now get the screen_info's pixel format
in the caller. Allows for matching pixel formats in drivers without
screen_info.
Convert the callers in efidrm and vesadrm to the new interface.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Julius Werner <jwerner@chromium.org>
Link: https://patch.msgid.link/20260217155836.96267-11-tzimmermann@suse.de
|
|
In samsung_dsim_host_attach(), drm_bridge_add() is called to add the
bridge. However, if samsung_dsim_register_te_irq() or
pdata->host_ops->attach() fails afterwards, the function returns
without removing the bridge, causing a memory leak.
Fix this by adding proper error handling with goto labels to ensure
drm_bridge_remove() is called in all error paths. Also ensure that
samsung_dsim_unregister_te_irq() is called if the attach operation
fails after the TE IRQ has been registered.
samsung_dsim_unregister_te_irq() function is moved without changes
to be before samsung_dsim_host_attach() to avoid forward declaration.
Fixes: e7447128ca4a ("drm: bridge: Generalize Exynos-DSI driver into a Samsung DSIM bridge")
Cc: stable@vger.kernel.org
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260209184115.10937-1-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
dw_dp_bind()
Return the value of devm_drm_bridge_add() in order to propagate the
error properly, if it fails due to resource allocation failure or bridge
registration failure.
This ensures that the bind function fails safely rather than proceeding
with a potentially incomplete bridge setup.
Fixes: b726970486d8 ("drm/bridge: synopsys: dw-dp: add bridge before attaching")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260206040621.4095517-1-nichen@iscas.ac.cn
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
imx_pd_probe()
Return the value of devm_drm_bridge_add() in order to propagate the
error properly, if it fails due to resource allocation failure or bridge
registration failure.
This ensures that the probe function fails safely rather than proceeding
with a potentially incomplete bridge setup.
Fixes: bf7e97910b9f ("drm/imx: parallel-display: add the bridge before attaching it")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260204090629.2209542-1-nichen@iscas.ac.cn
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
|
|
Increase event log size for GuC debug to 16MB, and for general debug
to 8MB. This allows for useful debug even if performance-affecting
DRM_XE_DEBUG_GUC is not enabled.
Without this change, GuC logs gathered by CI are useless for debug
due to limited size, which translates to time frame not even able
to cover cleanup after test.
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patch.msgid.link/20260213140008.1473400-1-tomasz.lis@intel.com
|
|
PORT_ALPM_CTL is supposed to be written only before link training. Remove
writing it from ALPM disable.
Also clearing ALPM_CTL_ALPM_AUX_LESS_ENABLE and is not about disabling ALPM
but switching to AUX-Wake ALPM. Stop touching this bit on ALPM disable.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7153
Fixes: 1ccbf135862b ("drm/i915/psr: Enable ALPM on source side for eDP Panel replay")
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20260212062731.397801-1-jouni.hogander@intel.com
|
|
Apply WA 18041344222 to Xe2 LPG graphics IP version 20.04 too.
Bspec: 56024
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/6e66746246439249a278f3d157f06071d83504b6.1770760591.git.harish.chegondi@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Engine WAs are not applied for SRIOV VF, even though they are processed.
Remove the SRIOV VF check.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/5879396bf202b64d9b5c4cb8c720f3e65d358fc1.1770760591.git.harish.chegondi@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Engine WAs are not applied for SRIOV VF, even though they are processed.
Remove the SRIOV VF check.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/4043a30d6a971cda3c13145e081e4eed7cc4e440.1770760591.git.harish.chegondi@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
Wa_14026781792 applies Xe3p_LPG graphics version 35.10.
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patch.msgid.link/20260219082931.2199618-2-nitin.r.gote@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
|
|
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "void **" but the returned type will be "void ***".
These are the same allocation size (pointer size), but the types do not
match. Adjust the allocation type to match the assignment.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260206222151.work.016-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
Not needed anymore since we use the VBIOS function.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|