| Age | Commit message (Collapse) | Author |
|---|
|
The gpio-virtuser configfs release path uses guard(mutex) to protect
the device structure. However, the device is freed before the guard
cleanup runs, causing mutex_unlock() to operate on freed memory.
Specifically, gpio_virtuser_device_config_group_release() destroys
the mutex and frees the device while still inside the guard(mutex)
scope. When the function returns, the guard cleanup invokes
mutex_unlock(&dev->lock), resulting in a slab use-after-free.
Limit the mutex lifetime by using a scoped_guard() only around the
activation check, so that the lock is released before mutex_destroy()
and kfree() are called.
Fixes: 91581c4b3f29 ("gpio: virtuser: new virtual testing driver for the GPIO API")
Signed-off-by: Yuhao Huang <nekowong743@gmail.com>
Link: https://lore.kernel.org/r/20260126040348.11167-1-yuhaohuang@YuhaodeMacBook-Pro.local
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
The BIT() macro uses unsigned long, which is 32 bits on 32-bit
architectures. When iterating over GPIO pins with index >= 32,
the expression (*value & BIT(i)) causes undefined behavior due
to shifting by a value >= type width.
Since 'value' is a pointer to u64, use BIT_ULL() to ensure correct
64-bit mask on all architectures.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Fixes: 2c4d00cb8fc5 ("gpiolib: acpi: Use BIT() macro to increase readability")
Signed-off-by: Denis Sergeev <denserg.edu@gmail.com>
Reviewed-by: Mika Westerberg <westeri@kernel.org>
Link: https://lore.kernel.org/r/20260126035914.16586-1-denserg.edu@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
There was a lockdep warning in sprd_gpio:
[ 6.258269][T329@C6] [ BUG: Invalid wait context ]
[ 6.258270][T329@C6] 6.18.0-android17-0-g30527ad7aaae-ab00009-4k #1 Tainted: G W OE
[ 6.258272][T329@C6] -----------------------------
[ 6.258273][T329@C6] modprobe/329 is trying to lock:
[ 6.258275][T329@C6] ffffff8081c91690 (&sprd_gpio->lock){....}-{3:3}, at: sprd_gpio_irq_unmask+0x4c/0xa4 [gpio_sprd]
[ 6.258282][T329@C6] other info that might help us debug this:
[ 6.258283][T329@C6] context-{5:5}
[ 6.258285][T329@C6] 3 locks held by modprobe/329:
[ 6.258286][T329@C6] #0: ffffff808baca108 (&dev->mutex){....}-{4:4}, at: __driver_attach+0xc4/0x204
[ 6.258295][T329@C6] #1: ffffff80965e7240 (request_class#4){+.+.}-{4:4}, at: __setup_irq+0x1cc/0x82c
[ 6.258304][T329@C6] #2: ffffff80965e70c8 (lock_class#4){....}-{2:2}, at: __setup_irq+0x21c/0x82c
[ 6.258313][T329@C6] stack backtrace:
[ 6.258314][T329@C6] CPU: 6 UID: 0 PID: 329 Comm: modprobe Tainted: G W OE 6.18.0-android17-0-g30527ad7aaae-ab00009-4k #1 PREEMPT 3ad5b0f45741a16e5838da790706e16ceb6717df
[ 6.258316][T329@C6] Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
[ 6.258317][T329@C6] Hardware name: Unisoc UMS9632-base Board (DT)
[ 6.258318][T329@C6] Call trace:
[ 6.258318][T329@C6] show_stack+0x20/0x30 (C)
[ 6.258321][T329@C6] __dump_stack+0x28/0x3c
[ 6.258324][T329@C6] dump_stack_lvl+0xac/0xf0
[ 6.258326][T329@C6] dump_stack+0x18/0x3c
[ 6.258329][T329@C6] __lock_acquire+0x824/0x2c28
[ 6.258331][T329@C6] lock_acquire+0x148/0x2cc
[ 6.258333][T329@C6] _raw_spin_lock_irqsave+0x6c/0xb4
[ 6.258334][T329@C6] sprd_gpio_irq_unmask+0x4c/0xa4 [gpio_sprd 814535e93c6d8e0853c45c02eab0fa88a9da6487]
[ 6.258337][T329@C6] irq_startup+0x238/0x350
[ 6.258340][T329@C6] __setup_irq+0x504/0x82c
[ 6.258342][T329@C6] request_threaded_irq+0x118/0x184
[ 6.258344][T329@C6] devm_request_threaded_irq+0x94/0x120
[ 6.258347][T329@C6] sc8546_init_irq+0x114/0x170 [sc8546_charger 223586ccafc27439f7db4f95b0c8e6e882349a99]
[ 6.258352][T329@C6] sc8546_charger_probe+0x53c/0x5a0 [sc8546_charger 223586ccafc27439f7db4f95b0c8e6e882349a99]
[ 6.258358][T329@C6] i2c_device_probe+0x2c8/0x350
[ 6.258361][T329@C6] really_probe+0x1a8/0x46c
[ 6.258363][T329@C6] __driver_probe_device+0xa4/0x10c
[ 6.258366][T329@C6] driver_probe_device+0x44/0x1b4
[ 6.258369][T329@C6] __driver_attach+0xd0/0x204
[ 6.258371][T329@C6] bus_for_each_dev+0x10c/0x168
[ 6.258373][T329@C6] driver_attach+0x2c/0x3c
[ 6.258376][T329@C6] bus_add_driver+0x154/0x29c
[ 6.258378][T329@C6] driver_register+0x70/0x10c
[ 6.258381][T329@C6] i2c_register_driver+0x48/0xc8
[ 6.258384][T329@C6] init_module+0x28/0xfd8 [sc8546_charger 223586ccafc27439f7db4f95b0c8e6e882349a99]
[ 6.258389][T329@C6] do_one_initcall+0x128/0x42c
[ 6.258392][T329@C6] do_init_module+0x60/0x254
[ 6.258395][T329@C6] load_module+0x1054/0x1220
[ 6.258397][T329@C6] __arm64_sys_finit_module+0x240/0x35c
[ 6.258400][T329@C6] invoke_syscall+0x60/0xec
[ 6.258402][T329@C6] el0_svc_common+0xb0/0xe4
[ 6.258405][T329@C6] do_el0_svc+0x24/0x30
[ 6.258407][T329@C6] el0_svc+0x54/0x1c4
[ 6.258409][T329@C6] el0t_64_sync_handler+0x68/0xdc
[ 6.258411][T329@C6] el0t_64_sync+0x1c4/0x1c8
This is because the spin_lock would change to rt_mutex in PREEMPT_RT,
however the sprd_gpio->lock would use in hard-irq, this is unsafe.
So change the spin_lock_t to raw_spin_lock_t to use the spinlock
in hard-irq.
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20260126094209.9855-1-xuewen.yan@unisoc.com
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
|
|
In the 'DeleteIndexEntryRoot' case of the 'do_action' function, the
entry size ('esize') is retrieved from the log record without adequate
bounds checking.
Specifically, the code calculates the end of the entry ('e2') using:
e2 = Add2Ptr(e1, esize);
It then calculates the size for memmove using 'PtrOffset(e2, ...)',
which subtracts the end pointer from the buffer limit. If 'esize' is
maliciously large, 'e2' exceeds the used buffer size. This results in
a negative offset which, when cast to size_t for memmove, interprets
as a massive unsigned integer, leading to a heap buffer overflow.
This commit adds a check to ensure that the entry size ('esize') strictly
fits within the remaining used space of the index header before performing
memory operations.
Fixes: b46acd6a6a62 ("fs/ntfs3: Add NTFS journal")
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
|
|
amdgpu verifies that a given panel is an OLED panel from extended caps
and can provide accurate information to userspace. Attach a property
to the DRM connector.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Link: https://patch.msgid.link/20260106170017.68158-3-superm1@kernel.org
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
|
|
If the driver can make an assertion whether a connected panel is an OLED
panel or not then it can attach a property to the connector that userspace
can use as a hint for color schemes.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Link: https://patch.msgid.link/20260106170017.68158-2-superm1@kernel.org
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
|
|
Russell King says:
====================
net: stmmac: rk: simplify per-SoC configuration [part]
====================
Link: https://patch.msgid.link/aXdTi4ViCkhhXvFI@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Group the MACPHY register offsets and associated bitfields together
to become self-documenting which definitions are associated with
which register.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vkL1y-00000005usW-1TKX@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rk3328 contains two GMAC instances - gmac2io and gmac2phy. While the
gmac2io instance may be connected to an external PHY, the gmac2phy
instance is permanently connected via RMII to an on-SoC integrated PHY.
The driver currently tests for the gmac2phy instance by checking
bsp_priv->integrated_phy (determined from the PHY's phy-is-integrated
property) and sometimes that the interface mode is RMII. This works
because the rk3328.dtsi has:
gmac2phy: ethernet@ff550000 {
compatible = "rockchip,rk3328-gmac";
phy-mode = "rmii";
phy-handle = <&phy>;
mdio {
phy: ethernet-phy@0 {
phy-is-integrated;
};
};
};
The driver contains a mechanism to look up the MMIO address in a table
to determine bsp_priv->id, which is used for every other Rockchip
device. Switch rk3328 to use this mechanism to determine bsp_priv->id
and use that to select which GRF register is used for configuration,
similarly to how the other Rockchip SoCs handle such differences.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vkL1t-00000005usQ-0vjt@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
It is not worth having a common rk_phy_power_ctl() when the only
difference is which regulator function is called. Also, passing
true/false is non-descriptive. Split this function, moving the code
appropriately into rk_phy_powerup() and rk_phy_powerdown().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vkL1o-00000005usJ-08hy@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In https://lore.kernel.org/netdev/aDne1Ybuvbk0AwG0@shell.armlinux.org.uk/
I requested that a follow-up patch to change the name of dwmac-rk's
phy_power_on() function, which clashes with the drivers/phy function
of the same name. This can cause confusion when grepping for this
function name, or when reviewing code. Thankfully, stmmac doesn't make
use of drivers/phy which saves this from compile errors.
However, as is the usual case when a request is made as part of a
review, if the review leads to successful application of the patch the
author doesn't bother following up with any such requests, and so the
problem falls back onto the reviewer to address... so here is the
solution.
Rename dwmac-rk's function to rk_phy_power_ctl(), as the function both
powers up and down.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vkL1i-00000005usD-3lhz@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull VFIO fix from Alex Williamson:
- Fix a gap in the initial VFIO DMABUF implementation where it's
required to explicitly implement a failing pin callback to prevent
pinned importers that cannot properly support move_notify.
(Leon Romanovsky)
* tag 'vfio-v6.19-rc8' of https://github.com/awilliam/linux-vfio:
vfio: Prevent from pinned DMABUF importers to attach to VFIO DMABUF
|
|
In preparation for allowing inheritance of BPF filters and filter
tables, add a reference count to the filter. This allows multiple tables
to safely include the same filter.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently a few pointer dereferences need to be made to both check if
BPF filters are installed, and then also to retrieve the actual filter
for the opcode. Cache the table in ctx->bpf_filters to avoid that.
Add a bit of debug info on ring exit to show if we ever got this wrong.
Small risk of that given that the table is currently only updated in one
spot, but once task forking is enabled, that will add one more spot.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This adds custom filtering for IORING_OP_OPENAT and IORING_OP_OPENAT2,
where the open_how flags, mode, and resolve can be checked by filters.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Example population method for the BPF based opcode filtering. This
exposes the socket family, type, and protocol to a registered BPF
filter. This in turn enables the filter to make decisions based on
what was passed in to the IORING_OP_SOCKET request type.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add support for loading classic BPF programs with io_uring to provide
fine-grained filtering of SQE operations. Unlike
IORING_REGISTER_RESTRICTIONS which only allows bitmap-based allow/deny
of opcodes, BPF filters can inspect request attributes and make dynamic
decisions.
The filter is registered via IORING_REGISTER_BPF_FILTER with a struct
io_uring_bpf:
struct io_uring_bpf_filter {
__u32 opcode; /* io_uring opcode to filter */
__u32 flags;
__u32 filter_len; /* number of BPF instructions */
__u32 resv;
__u64 filter_ptr; /* pointer to BPF filter */
__u64 resv2[5];
};
enum {
IO_URING_BPF_CMD_FILTER = 1,
};
struct io_uring_bpf {
__u16 cmd_type; /* IO_URING_BPF_* values */
__u16 cmd_flags; /* none so far */
__u32 resv;
union {
struct io_uring_bpf_filter filter;
};
};
and the filters get supplied a struct io_uring_bpf_ctx:
struct io_uring_bpf_ctx {
__u64 user_data;
__u8 opcode;
__u8 sqe_flags;
__u8 pdu_size;
__u8 pad[5];
};
where it's possible to filter on opcode and sqe_flags, with pdu_size
indicating how much extra data is being passed in beyond the pad field.
This will used for specific finer grained filtering inside an opcode.
An example of that for sockets is in one of the following patches.
Anything the opcode supports can end up in this struct, populated by
the opcode itself, and hence can be filtered for.
Filters have the following semantics:
- Return 1 to allow the request
- Return 0 to deny the request with -EACCES
- Multiple filters can be stacked per opcode. All filters must
return 1 for the opcode to be allowed.
- Filters are evaluated in registration order (most recent first)
The implementation uses classic BPF (cBPF) rather than eBPF for as
that's required for containers, and since they can be used by any
user in the system.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The automarkup extension incorrectly recognizes common English words
as C identifiers when they follow struct/union/enum/typedef keywords,
causing normal text like "... (a simple) struct that" (in `workqueue.rst`)
to be rendered as code blocks.
This patch adds Skipidentifiers list to filter out these words.
Signed-off-by: Yulong Han <wheatfox17@icloud.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260125124450.2005006-1-wheatfox17@icloud.com>
|
|
Jiayuan Chen says:
====================
bpf: Fix FIONREAD and copied_seq issues
syzkaller reported a bug [1] where a socket using sockmap, after being
unloaded, exposed incorrect copied_seq calculation. The selftest I
provided can be used to reproduce the issue reported by syzkaller.
TCP recvmsg seq # bug 2: copied E92C873, seq E68D125, rcvnxt E7CEB7C, fl 40
WARNING: CPU: 1 PID: 5997 at net/ipv4/tcp.c:2724 tcp_recvmsg_locked+0xb2f/0x2910 net/ipv4/tcp.c:2724
Call Trace:
<TASK>
receive_fallback_to_copy net/ipv4/tcp.c:1968 [inline]
tcp_zerocopy_receive+0x131a/0x2120 net/ipv4/tcp.c:2200
do_tcp_getsockopt+0xe28/0x26c0 net/ipv4/tcp.c:4713
tcp_getsockopt+0xdf/0x100 net/ipv4/tcp.c:4812
do_sock_getsockopt+0x34d/0x440 net/socket.c:2421
__sys_getsockopt+0x12f/0x260 net/socket.c:2450
__do_sys_getsockopt net/socket.c:2457 [inline]
__se_sys_getsockopt net/socket.c:2454 [inline]
__x64_sys_getsockopt+0xbd/0x160 net/socket.c:2454
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0xfa0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
A sockmap socket maintains its own receive queue (ingress_msg) which may
contain data from either its own protocol stack or forwarded from other
sockets.
FD1:read()
-- FD1->copied_seq++
| [read data]
|
[enqueue data] v
[sockmap] -> ingress to self -> ingress_msg queue
FD1 native stack ------> ^
-- FD1->rcv_nxt++ -> redirect to other | [enqueue data]
| |
| ingress to FD1
v ^
... | [sockmap]
FD2 native stack
The issue occurs when reading from ingress_msg: we update tp->copied_seq
by default, but if the data comes from other sockets (not the socket's
own protocol stack), tcp->rcv_nxt remains unchanged. Later, when
converting back to a native socket, reads may fail as copied_seq could
be significantly larger than rcv_nxt.
Additionally, FIONREAD calculation based on copied_seq and rcv_nxt is
insufficient for sockmap sockets, requiring separate field tracking.
[1] https://syzkaller.appspot.com/bug?extid=06dbd397158ec0ea4983
---
v7 -> v9: Address Jakub Sitnicki's feedback:
- Remove sk_receive_queue check in tcp_bpf_ioctl, only report
ingress_msg data length for FIONREAD
- Minor nits fixes
- Add Reviewed-by tag from John Fastabend
- Fix ci error
https://lore.kernel.org/bpf/20260113025121.197535-1-jiayuan.chen@linux.dev/
v5 -> v7: Some modifications suggested by Jakub Sitnicki, and added Reviewed-by tag.
https://lore.kernel.org/bpf/20260106051458.279151-1-jiayuan.chen@linux.dev/
v1 -> v5: Use skmsg.sk instead of extending BPF_F_XXX macro and fix CI
failure reported by CI
v1: https://lore.kernel.org/bpf/20251117110736.293040-1-jiayuan.chen@linux.dev/
====================
Link: https://patch.msgid.link/20260124113314.113584-1-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This commit adds two new test functions: one to reproduce the bug reported
by syzkaller [1], and another to cover the calculation of copied_seq.
The tests primarily involve installing and uninstalling sockmap on
sockets, then reading data to verify proper functionality.
Additionally, extend the do_test_sockmap_skb_verdict_fionread() function
to support UDP FIONREAD testing.
[1] https://syzkaller.appspot.com/bug?extid=06dbd397158ec0ea4983
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20260124113314.113584-4-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A socket using sockmap has its own independent receive queue: ingress_msg.
This queue may contain data from its own protocol stack or from other
sockets.
Therefore, for sockmap, relying solely on copied_seq and rcv_nxt to
calculate FIONREAD is not enough.
This patch adds a new msg_tot_len field in the psock structure to record
the data length in ingress_msg. Additionally, we implement new ioctl
interfaces for TCP and UDP to intercept FIONREAD operations.
Note that we intentionally do not include sk_receive_queue data in the
FIONREAD result. Data in sk_receive_queue has not yet been processed by
the BPF verdict program, and may be redirected to other sockets or
dropped. Including it would create semantic ambiguity since this data
may never be readable by the user.
Unix and VSOCK sockets have similar issues, but fixing them is outside
the scope of this patch as it would require more intrusive changes.
Previous work by John Fastabend made some efforts towards FIONREAD support:
commit e5c6de5fa025 ("bpf, sockmap: Incorrectly handling copied_seq")
Although the current patch is based on the previous work by John Fastabend,
it is acceptable for our Fixes tag to point to the same commit.
FD1:read()
-- FD1->copied_seq++
| [read data]
|
[enqueue data] v
[sockmap] -> ingress to self -> ingress_msg queue
FD1 native stack ------> ^
-- FD1->rcv_nxt++ -> redirect to other | [enqueue data]
| |
| ingress to FD1
v ^
... | [sockmap]
FD2 native stack
Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20260124113314.113584-3-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
A socket using sockmap has its own independent receive queue: ingress_msg.
This queue may contain data from its own protocol stack or from other
sockets.
The issue is that when reading from ingress_msg, we update tp->copied_seq
by default. However, if the data is not from its own protocol stack,
tcp->rcv_nxt is not increased. Later, if we convert this socket to a
native socket, reading from this socket may fail because copied_seq might
be significantly larger than rcv_nxt.
This fix also addresses the syzkaller-reported bug referenced in the
Closes tag.
This patch marks the skmsg objects in ingress_msg. When reading, we update
copied_seq only if the data is from its own protocol stack.
FD1:read()
-- FD1->copied_seq++
| [read data]
|
[enqueue data] v
[sockmap] -> ingress to self -> ingress_msg queue
FD1 native stack ------> ^
-- FD1->rcv_nxt++ -> redirect to other | [enqueue data]
| |
| ingress to FD1
v ^
... | [sockmap]
FD2 native stack
Closes: https://syzkaller.appspot.com/bug?extid=06dbd397158ec0ea4983
Fixes: 04919bed948dc ("tcp: Introduce tcp_read_skb()")
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20260124113314.113584-2-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Extend some of the existing CSS iterator selftests such that they
cover the newly introduced BPF_CGROUP_ITER_CHILDREN iterator control
option.
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/r/20260127085112.3608687-2-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently, the BPF cgroup iterator supports walking descendants in
either pre-order (BPF_CGROUP_ITER_DESCENDANTS_PRE) or post-order
(BPF_CGROUP_ITER_DESCENDANTS_POST). These modes perform an exhaustive
depth-first search (DFS) of the hierarchy. In scenarios where a BPF
program may need to inspect only the direct children of a given parent
cgroup, a full DFS is unnecessarily expensive.
This patch introduces a new BPF cgroup iterator control option,
BPF_CGROUP_ITER_CHILDREN. This control option restricts the traversal
to the immediate children of a specified parent cgroup, allowing for
more targeted and efficient iteration, particularly when exhaustive
depth-first search (DFS) traversal is not required.
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Link: https://lore.kernel.org/r/20260127085112.3608687-1-mattbobrowski@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
When __pcs_replace_empty_main() fails to obtain a full sheaf directly
from the barn, it may either:
- Refill an empty sheaf obtained via barn_get_empty_sheaf(), or
- Allocate a brand new full sheaf via alloc_full_sheaf().
After reacquiring the per-CPU lock, if pcs->main is still empty and
pcs->spare is NULL, the current code donates the empty main sheaf to
the barn via barn_put_empty_sheaf() and installs the full sheaf as
pcs->main, leaving pcs->spare unpopulated.
Instead, keep the existing empty main sheaf locally as the spare:
pcs->spare = pcs->main;
pcs->main = full;
This populates pcs->spare earlier, which can reduce future barn traffic.
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Hao Li <haolee.swjtu@gmail.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Zhao Liu <zhao1.liu@intel.com>
|
|
slab_mergeable() determines whether a slab cache can be merged, but it
should not be used when the cache is not fully created yet.
Extract the pre-cache-creation mergeability checks into
slab_args_unmergeable(), which evaluates kmem_cache_args, slab flags,
and slab_nomerge to determine if a cache will be mergeable before it is
created.
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Link: https://patch.msgid.link/20260127103151.21883-2-harry.yoo@oracle.com
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Before enabling sheaves for all caches (with automatically determined
capacity), their enablement should no longer prevent merging of caches.
Limit this merge prevention only to caches that were created with a
specific sheaf capacity, by adding the SLAB_NO_MERGE flag to them.
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Move __kmem_cache_alias() to slab_common.c since it's called by
__kmem_cache_create_args() and calls find_mergeable() that both
are in this file. We can remove two slab.h declarations and make
them static. Instead declare sysfs_slab_alias() from slub.c so
that __kmem_cache_alias() can keep calling it.
Add args parameter to __kmem_cache_alias() and find_mergeable() instead
of align and ctor. With that we can also move the checks for usersize
and sheaf_capacity there from __kmem_cache_create_args() and make the
result more symmetric with slab_unmergeable().
No functional changes intended.
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
All the debug flags prevent merging, except SLAB_CONSISTENCY_CHECKS. This
is suboptimal because this flag (like any debug flags) prevents the
usage of any fastpaths, and thus affect performance of any aliased
cache. Also the objects from an aliased cache than the one specified for
debugging could also interfere with the debugging efforts.
Fix this by adding the whole SLAB_DEBUG_FLAGS collection to
SLAB_NEVER_MERGE instead of individual debug flags, so it now also
includes SLAB_CONSISTENCY_CHECKS.
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
kvfree_call_rcu() can be called while holding a raw_spinlock_t.
Since __kfree_rcu_sheaf() may acquire a spinlock_t (which becomes a
sleeping lock on PREEMPT_RT) and violate lock nesting rules,
kvfree_call_rcu() bypasses the sheaves layer entirely on PREEMPT_RT.
However, lockdep still complains about acquiring spinlock_t while holding
raw_spinlock_t, even on !PREEMPT_RT where spinlock_t is a spinning lock.
This causes a false lockdep warning [1]:
=============================
[ BUG: Invalid wait context ]
6.19.0-rc6-next-20260120 #21508 Not tainted
-----------------------------
migration/1/23 is trying to lock:
ffff8afd01054e98 (&barn->lock){..-.}-{3:3}, at: barn_get_empty_sheaf+0x1d/0xb0
other info that might help us debug this:
context-{5:5}
3 locks held by migration/1/23:
#0: ffff8afd01fd89a8 (&p->pi_lock){-.-.}-{2:2}, at: __balance_push_cpu_stop+0x3f/0x200
#1: ffffffff9f15c5c8 (rcu_read_lock){....}-{1:3}, at: cpuset_cpus_allowed_fallback+0x27/0x250
#2: ffff8afd1f470be0 ((local_lock_t *)&pcs->lock){+.+.}-{3:3}, at: __kfree_rcu_sheaf+0x52/0x3d0
stack backtrace:
CPU: 1 UID: 0 PID: 23 Comm: migration/1 Not tainted 6.19.0-rc6-next-20260120 #21508 PREEMPTLAZY
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Stopper: __balance_push_cpu_stop+0x0/0x200 <- balance_push+0x118/0x170
Call Trace:
<TASK>
__dump_stack+0x22/0x30
dump_stack_lvl+0x60/0x80
dump_stack+0x19/0x24
__lock_acquire+0xd3a/0x28e0
? __lock_acquire+0x5a9/0x28e0
? __lock_acquire+0x5a9/0x28e0
? barn_get_empty_sheaf+0x1d/0xb0
lock_acquire+0xc3/0x270
? barn_get_empty_sheaf+0x1d/0xb0
? __kfree_rcu_sheaf+0x52/0x3d0
_raw_spin_lock_irqsave+0x47/0x70
? barn_get_empty_sheaf+0x1d/0xb0
barn_get_empty_sheaf+0x1d/0xb0
? __kfree_rcu_sheaf+0x52/0x3d0
__kfree_rcu_sheaf+0x19f/0x3d0
kvfree_call_rcu+0xaf/0x390
set_cpus_allowed_force+0xc8/0xf0
[...]
</TASK>
This wasn't triggered until sheaves were enabled for all slab caches,
since kfree_rcu() wasn't being called with a raw spinlock held for
caches with sheaves (vma, maple node).
As suggested by Vlastimil Babka, fix this by using a lockdep map with
LD_WAIT_CONFIG wait type to tell lockdep that acquiring spinlock_t is valid
in this case, as those spinlocks won't be used on PREEMPT_RT.
Note that kfree_rcu_sheaf_map should be acquired using _try() variant,
otherwise the acquisition of the lockdep map itself will trigger an invalid
wait context warning.
Reported-by: Paul E. McKenney <paulmck@kernel.org>
Closes: https://lore.kernel.org/linux-mm/c858b9af-2510-448b-9ab3-058f7b80dd42@paulmck-laptop [1]
Fixes: ec66e0d59952 ("slab: add sheaf support for batching kfree_rcu() operations")
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
After we submit the rcu_free sheaves to call_rcu() we need to make sure
the rcu callbacks complete. kvfree_rcu_barrier() does that via
flush_all_rcu_sheaves() but kvfree_rcu_barrier_on_cache() doesn't. Fix
that.
This currently causes no issues because the caches with sheaves we have
are never destroyed. The problem flagged by kernel test robot was
reported for a patch that enables sheaves for (almost) all caches, and
occurred only with CONFIG_KASAN. Harry Yoo found the root cause [1]:
It turns out the object freed by sheaf_flush_unused() was in KASAN
percpu quarantine list (confirmed by dumping the list) by the time
__kmem_cache_shutdown() returns an error.
Quarantined objects are supposed to be flushed by kasan_cache_shutdown(),
but things go wrong if the rcu callback (rcu_free_sheaf_nobarn()) is
processed after kasan_cache_shutdown() finishes.
That's why rcu_barrier() in __kmem_cache_shutdown() didn't help,
because it's called after kasan_cache_shutdown().
Calling rcu_barrier() in kvfree_rcu_barrier_on_cache() guarantees
that it'll be added to the quarantine list before kasan_cache_shutdown()
is called. So it's a valid fix!
[1] https://lore.kernel.org/all/aWd6f3jERlrB5yeF@hyeyoo/
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202601121442.c530bed3-lkp@intel.com
Fixes: 0f35040de593 ("mm/slab: introduce kvfree_rcu_barrier_on_cache() for cache destruction")
Cc: stable@vger.kernel.org
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Tested-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
These imports are already in scope by importing `kernel::prelude::*` and
does not need to be imported separately.
Signed-off-by: Gary Guo <gary@garyguo.net>
Acked-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Call drm_dev_unregister() when xe_device_probe() fails after successful
drm_dev_register(). This ensures the DRM device is promptly unregistered
before returning an error, avoiding leaving it registered on the failure
path.
Otherwise, there is warn message if xe_device_probe() is called again:
"
[ 207.322365] [drm:drm_minor_register]
[ 207.322381] debugfs: '128' already exists in 'dri'
[ 207.322432] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:01.0/0000:03:00.0/drm/renderD128'
[ 207.322435] CPU: 5 UID: 0 PID: 10261 Comm: modprobe Tainted: G B W 6.19.0-rc2-lgci-xe-kernel+ #223 PREEMPT(voluntary)
[ 207.322439] Tainted: [B]=BAD_PAGE, [W]=WARN
[ 207.322440] Hardware name: ASUS System Product Name/PRIME Z790-P WIFI, BIOS 0812 02/24/2023
[ 207.322441] Call Trace:
[ 207.322442] <TASK>
[ 207.322443] dump_stack_lvl+0xa0/0xc0
[ 207.322446] dump_stack+0x10/0x20
[ 207.322448] sysfs_warn_dup+0xd5/0x110
[ 207.322451] sysfs_create_dir_ns+0x1f6/0x280
[ 207.322453] ? __pfx_sysfs_create_dir_ns+0x10/0x10
[ 207.322455] ? lock_acquire+0x1a4/0x2e0
[ 207.322458] ? __kasan_check_read+0x11/0x20
[ 207.322461] kobject_add_internal+0x28d/0x8e0
[ 207.322464] kobject_add+0x11f/0x1f0
[ 207.322465] ? lock_acquire+0x1a4/0x2e0
[ 207.322467] ? __pfx_kobject_add+0x10/0x10
[ 207.322469] ? __kasan_check_write+0x14/0x20
[ 207.322471] ? kobject_put+0x62/0x4a0
[ 207.322473] ? get_device_parent.isra.0+0x1bb/0x4c0
[ 207.322475] ? kobject_put+0x62/0x4a0
[ 207.322477] device_add+0x2d7/0x1500
[ 207.322479] ? __pfx_device_add+0x10/0x10
[ 207.322481] ? drm_debugfs_add_file+0xfa/0x170
[ 207.322483] ? drm_debugfs_add_files+0x82/0xd0
[ 207.322485] ? drm_debugfs_add_files+0x82/0xd0
[ 207.322487] drm_minor_register+0x10a/0x2d0
[ 207.322489] drm_dev_register+0x143/0x860
[ 207.322491] ? xe_configfs_get_psmi_enabled+0x12/0x90 [xe]
[ 207.322667] xe_device_probe+0x185b/0x2c40 [xe]
[ 207.322812] ? __pfx___drm_dev_dbg+0x10/0x10
[ 207.322815] ? add_dr+0x180/0x220
[ 207.322818] ? __pfx___drmm_mutex_release+0x10/0x10
[ 207.322821] ? __pfx_xe_device_probe+0x10/0x10 [xe]
[ 207.322966] ? xe_pm_init_early+0x33a/0x410 [xe]
[ 207.323136] xe_pci_probe+0x936/0x1250 [xe]
[ 207.323298] ? lock_acquire+0x1a4/0x2e0
[ 207.323302] ? __pfx_xe_pci_probe+0x10/0x10 [xe]
[ 207.323464] local_pci_probe+0xe6/0x1a0
[ 207.323468] pci_device_probe+0x523/0x840
[ 207.323470] ? __pfx_pci_device_probe+0x10/0x10
[ 207.323473] ? sysfs_do_create_link_sd.isra.0+0x8c/0x110
[ 207.323476] ? sysfs_create_link+0x48/0xc0
[ 207.323479] really_probe+0x1fd/0x8a0
...
"
Fixes: dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patch.msgid.link/20260109211041.2446012-2-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 60bfb8baf8f0d5b0d521744dfd01c880ce1a23f3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Eric Dumazet has noticed cache_from_obj() is not inlined with clang and
suggested splitting it into two functions, where the smaller inlined one
assumes the fastpath is !CONFIG_SLAB_FREELIST_HARDENED. However most
distros enable it these days and so this would likely add a function
call to the object free fastpaths.
Instead take a step back and consider that cache_from_obj() is a relict
from when memcgs created their separate kmem_cache copies, as the
outdated comment in build_detached_freelist() reminds us.
Meanwhile hardening/debugging had reused cache_from_obj() to validate
that the freed object really belongs to a slab from the cache we think
we are freeing from.
In build_detached_freelist() simply remove this, because it did not
handle the NULL result from cache_from_obj() failure properly, nor
validate objects (for the NULL slab->slab_cache pointer) when called via
kfree_bulk(). If anyone is motivated to implement it properly, it should
be possible in a similar way to kmem_cache_free().
In kmem_cache_free(), do the hardening/debugging checks directly so they
are inlined by definition and virt_to_slab(obj) is performed just once.
In case they failed, call a newly introduced warn_free_bad_obj() that
performs the warnings outside of the fastpath, and leak the object.
As an intentional change, leak the object when slab->slab_cache differs
from the cache given to kmem_cache_free(). Previously we would only leak
when the object is not in a valid slab page or the slab->slab_cache
pointer is NULL, and otherwise trust the slab->slab_cache over the
kmem_cache_free() argument. But if those differ, it means something went
wrong enough that it's best not to continue freeing.
As a result the fastpath should be inlined in all configs and the
warnings are moved away.
Reported-by: Eric Dumazet <edumazet@google.com>
Closes: https://lore.kernel.org/all/20260115130642.3419324-1-edumazet@google.com/
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Hao Li <hao.li@linux.dev>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
igt_mmap_migrate() tests migration with various parameters.
In one of the cases, where FILL and UNFAULTABLE flags are set,
during first stages of this test, a mock file is opened in
igt_mmap_offset(), which results in allocating GEM objects for
page table structures and scratch in GPU mappable memory.
Then, also in igt_mmap_offset(), the file is closed (fput) and
the cleanup of these objects is scheduled on a delayed worqueue,
which is designed to execute after unspecified amount of time.
Next, the test calls igt_fill_mappable() to fill mappable GPU
memory. At this point, three scenarios are possible
(N = max size of GPU memory for this test in MiB):
1) the objects allocated for the mock file get cleaned up after
crucial part of the test is over, so the memory is full with
the 1 MiB they occupy and N - 1 MiB added by
igt_fill_mappable(), so the migration fails properly;
2) the object cleanup fires before igt_fill_mappable()
completes, so the whole memory is populated with N MiB from
igt_fill_mappable(), so migration fails as well;
3) the object cleanup is performed right after fill is done,
so only N - 1 MiB are in the mappable portion of GPU memory,
allowing the migration to succeed - we'd expect no space
left to perform migration, but an object was able to fit in
the remaining 1 MiB, which caused get_user() to succeed, so
a page fault did not fail.
The test incorrectly assumes that the GPU mappable memory state
is unchanging during the test. Amend this by keeping the mock
file open until migration and page fault checking is complete.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13929
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Acked-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/6xc74s3mbmtliqxihtxbok32jobhc26vfm5mu6cod4ywov6utf@ujp3rmqcwmr3
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
|
|
When building a patch to a single-file kernel module with
CONFIG_MODULE_SRCVERSION_ALL enabled, the klp-build module link fails in
modpost:
Diffing objects
drivers/md/raid0.o: changed function: raid0_run
Building patch module: livepatch-0001-patch-raid0_run.ko
drivers/md/raid0.c: No such file or directory
...
The problem here is that klp-build copied drivers/md/.raid0.o.cmd to the
module build directory, but it didn't also copy over the input source
file listed in the .cmd file:
source_drivers/md/raid0.o := drivers/md/raid0.c
So modpost dies due to the missing .c file which is needed for
calculating checksums for CONFIG_MODULE_SRCVERSION_ALL.
Instead of copying the original .cmd file, just create an empty one.
Modpost only requires that it exists. The original object's build
dependencies are irrelevant for the frankenobjects used by klp-build.
Fixes: 24ebfcd65a87 ("livepatch/klp-build: Introduce klp-build script for generating livepatch modules")
Reported-by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Link: https://patch.msgid.link/c41b6629e02775e4c1015259aa36065b3fe2f0f3.1769471792.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Running objtool klp-diff on a changed function which uses WARN() can
fail with:
vmlinux.o: error: objtool: md_run+0x866: failed to convert reloc sym '__bug_table' to its proper format
The problem is that since commit 5b472b6e5bd9 ("x86_64/bug: Implement
__WARN_printf()"), each __WARN_printf() call site now directly
references its bug table entry. klp-diff errors out when it can't
convert such section-based references to object symbols (because bug
table entries don't have symbols).
Luckily, klp-diff already has code to create symbols for bug table
entries. Move that code earlier, before function diffing.
Fixes: dd590d4d57eb ("objtool/klp: Introduce klp diff subcommand for diffing object files")
Fixes: 5b472b6e5bd9 ("x86_64/bug: Implement __WARN_printf()")
Reported-by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Link: https://patch.msgid.link/a8e0a714b9da962858842b9aecd63b4900927c88.1769406850.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
The source file tools/objtool/elf.c defines the macros ALIGN_UP(),
ALIGN_UP_POW2() and MAX(). These macros unnecessarily duplicate
functionality already available under tools/include/, specifically ALIGN(),
roundup_pow_of_two() and max().
More importantly, the definition of ALIGN_UP_POW2() is incorrect when the
input is 1, as it results in a call to __builtin_clz(0), which produces an
undefined result. This issue impacts the function elf_alloc_reloc(). When
adding the first relocation to a section, the function allocates an
undefined number of relocations.
Replace the custom macros with the shared functionality to resolve these
issues.
Fixes: 2c05ca026218 ("objtool: Add elf_create_reloc() and elf_init_reloc()")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Link: https://patch.msgid.link/20260126151356.3924887-1-petr.pavlu@suse.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
When objtool is cross-compiled in ia32 container for x86_64 target it
fails with the following errors:
> disas.c: In function 'disas_print_addr_sym':
> disas.c:173:38: error: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'bfd_vma' {aka 'long long unsigned int'} [-Werror=format=]
> 173 | DINFO_FPRINTF(dinfo, "0x%lx <%s>", addr, symstr);
> | ^~~~~~~~~~~~ ~~~~
> | |
> | bfd_vma {aka long long unsigned int}
Provide a correct printf-fmt depending on sizeof(bfd_vma).
Fixes: 5d859dff266f ("objtool: Print symbol during disassembly")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Link: https://patch.msgid.link/20260126-objtool-ia32-v1-1-bb6feaf17566@arista.com
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
Make several header functions static. Also remove
vdo_is_upgradable_version, which is unused.
Signed-off-by: Matthew Sakai <msakai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
|
|
The fsi bus got a dedicated probe function. Make use of that. This fixes
a runtime warning about the driver needing to be converted to the bus
probe method.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/fc2a758ef00844dd5bd614a25b36a4a38355d12d.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fsi bus got a dedicated probe function. Make use of that. This fixes
a runtime warning about the driver needing to be converted to the bus
probe method.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/d8c27aed45bf3119c08c9772768d675ae2ccc0c3.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fsi bus got a dedicated probe function. Make use of that. This fixes
a runtime warning about the driver needing to be converted to the bus
probe method.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/d02a22f2f5442dc03d1d803d1b8190bc89bc71d4.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fsi bus got a dedicated probe function. Make use of that. This fixes
a runtime warning about the driver needing to be converted to the bus
probe method.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/79dd5a9459f0719b7602165c89eb6fc24815f3b5.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fsi bus got a dedicated probe function. Make use of that. This fixes
a runtime warning about the driver needing to be converted to the bus
probe method.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/17686d71b4ad3f7ebb63e92453273095a5dd09ea.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The fsi bus got a dedicated probe and remove callback. Make use of them.
This fixes a runtime warning about the driver needing to be converted to
the bus methods.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/694a7d077316c3e2883a8410eade67cd578ee556.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Introduce a bus specific probe and remove function. For now this only
allows to get rid of a cast of the generic device to an fsi device in
the drivers and changes the remove prototype to return void---a non-zero
return value is ignored anyhow.
The objective is to get rid of users of struct device callbacks
.probe(), .remove() and .shutdown() to eventually remove these.
Until all fsi drivers are converted this results in a runtime warning
about the drivers needing an update because there is a bus probe
function and a driver probe function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/3b53adb75a5ae7894736d46cb6eb85f5ef36520e.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are no users of fsi_bus_type outside of fsi-core.c, so make that
variable static, don't export it and drop the declaration from the
public header file.
As there is a usage of fsi_bus_type in fsi_create_device() the
definition of that variable must happen further up in the file to not
have to add a local declaration.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/bfd83034dec04d5a6b01a234988377fc6224614d.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit FIXME ("fsi: Assign driver's bus in fsi_driver_register()")
module_fsi_driver() cares about assigning the driver's bus member. Drop
the explicit driver specific assignment.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/279e26a6740f10d119be7ea01d4af596309b3bb4.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit FIXME ("fsi: Assign driver's bus in fsi_driver_register()")
module_fsi_driver() cares about assigning the driver's bus member. Drop
the explicit driver specific assignment.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Eddie James <eajames@linux.ibm.com>
Link: https://patch.msgid.link/8a36a0dba809d3bfe225627fd178daece10ff6a5.1765279318.git.u.kleine-koenig@baylibre.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
