diff options
| author | Emil Tantilov <emil.s.tantilov@intel.com> | 2025-11-20 16:12:14 -0800 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2026-01-17 16:31:24 +0100 |
| commit | be3d312761995bc124c5f022f5c729463e9eb7cf (patch) | |
| tree | e17a925471d14e2d9d7b01c0ed9c9cf192ff3929 | |
| parent | 3264881431e308b9c72cb8a0159d57a56d67dd79 (diff) | |
idpf: keep the netdev when a reset fails
[ Upstream commit 083029bd8b445595222a3cd14076b880781c1765 ]
During a successful reset the driver would re-allocate vport resources
while keeping the netdevs intact. However, in case of an error in the
init task, the netdev of the failing vport will be unregistered,
effectively removing the network interface:
[ 121.211076] idpf 0000:83:00.0: enabling device (0100 -> 0102)
[ 121.221976] idpf 0000:83:00.0: Device HW Reset initiated
[ 124.161229] idpf 0000:83:00.0 ens801f0: renamed from eth0
[ 124.163364] idpf 0000:83:00.0 ens801f0d1: renamed from eth1
[ 125.934656] idpf 0000:83:00.0 ens801f0d2: renamed from eth2
[ 128.218429] idpf 0000:83:00.0 ens801f0d3: renamed from eth3
ip -br a
ens801f0 UP
ens801f0d1 UP
ens801f0d2 UP
ens801f0d3 UP
echo 1 > /sys/class/net/ens801f0/device/reset
[ 145.885537] idpf 0000:83:00.0: resetting
[ 145.990280] idpf 0000:83:00.0: reset done
[ 146.284766] idpf 0000:83:00.0: HW reset detected
[ 146.296610] idpf 0000:83:00.0: Device HW Reset initiated
[ 211.556719] idpf 0000:83:00.0: Transaction timed-out (op:526 cookie:7700 vc_op:526 salt:77 timeout:60000ms)
[ 272.996705] idpf 0000:83:00.0: Transaction timed-out (op:502 cookie:7800 vc_op:502 salt:78 timeout:60000ms)
ip -br a
ens801f0d1 DOWN
ens801f0d2 DOWN
ens801f0d3 DOWN
Re-shuffle the logic in the error path of the init task to make sure the
netdevs remain intact. This will allow the driver to attempt recovery via
subsequent resets, provided the FW is still functional.
The main change is to make sure that idpf_decfg_netdev() is not called
should the init task fail during a reset. The error handling is
consolidated under unwind_vports, as the removed labels had the same
cleanup logic split depending on the point of failure.
Fixes: ce1b75d0635c ("idpf: add ptypes and MAC filter support")
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
| -rw-r--r-- | drivers/net/ethernet/intel/idpf/idpf_lib.c | 17 |
1 files changed, 6 insertions, 11 deletions
diff --git a/drivers/net/ethernet/intel/idpf/idpf_lib.c b/drivers/net/ethernet/intel/idpf/idpf_lib.c index 173ddc248867..568b57cb2298 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_lib.c +++ b/drivers/net/ethernet/intel/idpf/idpf_lib.c @@ -1500,6 +1500,10 @@ void idpf_init_task(struct work_struct *work) goto unwind_vports; } + err = idpf_send_get_rx_ptype_msg(vport); + if (err) + goto unwind_vports; + index = vport->idx; vport_config = adapter->vport_config[index]; @@ -1512,15 +1516,11 @@ void idpf_init_task(struct work_struct *work) err = idpf_check_supported_desc_ids(vport); if (err) { dev_err(&pdev->dev, "failed to get required descriptor ids\n"); - goto cfg_netdev_err; + goto unwind_vports; } if (idpf_cfg_netdev(vport)) - goto cfg_netdev_err; - - err = idpf_send_get_rx_ptype_msg(vport); - if (err) - goto handle_err; + goto unwind_vports; /* Once state is put into DOWN, driver is ready for dev_open */ np = netdev_priv(vport->netdev); @@ -1558,11 +1558,6 @@ void idpf_init_task(struct work_struct *work) return; -handle_err: - idpf_decfg_netdev(vport); -cfg_netdev_err: - idpf_vport_rel(vport); - adapter->vports[index] = NULL; unwind_vports: if (default_vport) { for (index = 0; index < adapter->max_vports; index++) { |