scsi: sg: Fix occasional bogus elapsed time that exceeds timeout

[ Upstream commit 0e1677654259a2f3ccf728de1edde922a3c4ba57 ]

A race condition was found in sg_proc_debug_helper(). It was observed on
a system using an IBM LTO-9 SAS Tape Drive (ULTRIUM-TD9) and monitoring
/proc/scsi/sg/debug every second. A very large elapsed time would
sometimes appear. This is caused by two race conditions.

We reproduced the issue with an IBM ULTRIUM-HH9 tape drive on an x86_64
architecture. A patched kernel was built, and the race condition could
not be observed anymore after the application of this patch. A
reproducer C program utilising the scsi_debug module was also built by
Changhui Zhong and can be viewed here:

https://github.com/MichaelRabek/linux-tests/blob/master/drivers/scsi/sg/sg_race_trigger.c

The first race happens between the reading of hp->duration in
sg_proc_debug_helper() and request completion in sg_rq_end_io().  The
hp->duration member variable may hold either of two types of
information:

 #1 - The start time of the request. This value is present while
      the request is not yet finished.

 #2 - The total execution time of the request (end_time - start_time).

If sg_proc_debug_helper() executes *after* the value of hp->duration was
changed from #1 to #2, but *before* srp->done is set to 1 in
sg_rq_end_io(), a fresh timestamp is taken in the else branch, and the
elapsed time (value type #2) is subtracted from a timestamp, which
cannot yield a valid elapsed time (which is a type #2 value as well).

To fix this issue, the value of hp->duration must change under the
protection of the sfp->rq_list_lock in sg_rq_end_io().  Since
sg_proc_debug_helper() takes this read lock, the change to srp->done and
srp->header.duration will happen atomically from the perspective of
sg_proc_debug_helper() and the race condition is thus eliminated.

The second race condition happens between sg_proc_debug_helper() and
sg_new_write(). Even though hp->duration is set to the current time
stamp in sg_add_request() under the write lock's protection, it gets
overwritten by a call to get_sg_io_hdr(), which calls copy_from_user()
to copy struct sg_io_hdr from userspace into kernel space. hp->duration
is set to the start time again in sg_common_write(). If
sg_proc_debug_helper() is called between these two calls, an arbitrary
value set by userspace (usually zero) is used to compute the elapsed
time.

To fix this issue, hp->duration must be set to the current timestamp
again after get_sg_io_hdr() returns successfully. A small race window
still exists between get_sg_io_hdr() and setting hp->duration, but this
window is only a few instructions wide and does not result in observable
issues in practice, as confirmed by testing.

Additionally, we fix the format specifier from %d to %u for printing
unsigned int values in sg_proc_debug_helper().

Signed-off-by: Michal Rábek <mrabek@redhat.com>
Suggested-by: Tomas Henzl <thenzl@redhat.com>
Tested-by: Changhui Zhong <czhong@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: John Meneghini <jmeneghi@redhat.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Link: https://patch.msgid.link/20251212160900.64924-1-mrabek@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

1 files changed, 13 insertions, 7 deletions

diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 7260a1ebc03d..53dd46150849 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -731,6 +731,8 @@ sg_new_write(Sg_fd *sfp, struct file *file, const char __user *buf,
 		sg_remove_request(sfp, srp);
 		return -EFAULT;
 	}
+	hp->duration = jiffies_to_msecs(jiffies);
+
 	if (hp->interface_id != 'S') {
 		sg_remove_request(sfp, srp);
 		return -ENOSYS;
@@ -815,7 +817,6 @@ sg_common_write(Sg_fd * sfp, Sg_request * srp,
 		return -ENODEV;
 	}
 
-	hp->duration = jiffies_to_msecs(jiffies);
 	if (hp->interface_id != '\0' &&	/* v3 (or later) interface */
 	    (SG_FLAG_Q_AT_TAIL & hp->flags))
 		at_head = 0;
@@ -1339,9 +1340,6 @@ sg_rq_end_io(struct request *rq, blk_status_t status)
 				      "sg_cmd_done: pack_id=%d, res=0x%x\n",
 				      srp->header.pack_id, result));
 	srp->header.resid = resid;
-	ms = jiffies_to_msecs(jiffies);
-	srp->header.duration = (ms > srp->header.duration) ?
-				(ms - srp->header.duration) : 0;
 	if (0 != result) {
 		struct scsi_sense_hdr sshdr;
 
@@ -1390,6 +1388,9 @@ sg_rq_end_io(struct request *rq, blk_status_t status)
 			done = 0;
 	}
 	srp->done = done;
+	ms = jiffies_to_msecs(jiffies);
+	srp->header.duration = (ms > srp->header.duration) ?
+				(ms - srp->header.duration) : 0;
 	write_unlock_irqrestore(&sfp->rq_list_lock, iflags);
 
 	if (likely(done)) {
@@ -2535,6 +2536,7 @@ static void sg_proc_debug_helper(struct seq_file *s, Sg_device * sdp)
 	const sg_io_hdr_t *hp;
 	const char * cp;
 	unsigned int ms;
+	unsigned int duration;
 
 	k = 0;
 	list_for_each_entry(fp, &sdp->sfds, sfd_siblings) {
@@ -2572,13 +2574,17 @@ static void sg_proc_debug_helper(struct seq_file *s, Sg_device * sdp)
 			seq_printf(s, " id=%d blen=%d",
 				   srp->header.pack_id, blen);
 			if (srp->done)
-				seq_printf(s, " dur=%d", hp->duration);
+				seq_printf(s, " dur=%u", hp->duration);
 			else {
 				ms = jiffies_to_msecs(jiffies);
-				seq_printf(s, " t_o/elap=%d/%d",
+				duration = READ_ONCE(hp->duration);
+				if (duration)
+					duration = (ms > duration ?
+						    ms - duration : 0);
+				seq_printf(s, " t_o/elap=%u/%u",
 					(new_interface ? hp->timeout :
 						  jiffies_to_msecs(fp->timeout)),
-					(ms > hp->duration ? ms - hp->duration : 0));
+					duration);
 			}
 			seq_printf(s, "ms sgat=%d op=0x%02x\n", usg,
 				   (int) srp->data.cmd_opcode);