linux-stable.git/virt, branch v6.1.35 Linux kernel stable tree KVM: Fix vcpu_array[0] races 2023-05-24T16:32:50+00:00 Michal Luczaj mhal@rbox.co 2023-05-10T14:04:09+00:00 154de42fe3f2b4460324edbca332c917fa3ed07d commit afb2acb2e3a32e4d56f7fbd819769b98ed1b7520 upstream. In kvm_vm_ioctl_create_vcpu(), add vcpu to vcpu_array iff it's safe to access vcpu via kvm_get_vcpu() and kvm_for_each_vcpu(), i.e. when there's no failure path requiring vcpu removal and destruction. Such order is important because vcpu_array accessors may end up referencing vcpu at vcpu_array[0] even before online_vcpus is set to 1. When online_vcpus=0, any call to kvm_get_vcpu() goes through array_index_nospec() and ends with an attempt to xa_load(vcpu_array, 0): int num_vcpus = atomic_read(&kvm->online_vcpus); i = array_index_nospec(i, num_vcpus); return xa_load(&kvm->vcpu_array, i); Similarly, when online_vcpus=0, a kvm_for_each_vcpu() does not iterate over an "empty" range, but actually [0, ULONG_MAX]: xa_for_each_range(&kvm->vcpu_array, idx, vcpup, 0, \ (atomic_read(&kvm->online_vcpus) - 1)) In both cases, such online_vcpus=0 edge case, even if leading to unnecessary calls to XArray API, should not be an issue; requesting unpopulated indexes/ranges is handled by xa_load() and xa_for_each_range(). However, this means that when the first vCPU is created and inserted in vcpu_array *and* before online_vcpus is incremented, code calling kvm_get_vcpu()/kvm_for_each_vcpu() already has access to that first vCPU. This should not pose a problem assuming that once a vcpu is stored in vcpu_array, it will remain there, but that's not the case: kvm_vm_ioctl_create_vcpu() first inserts to vcpu_array, then requests a file descriptor. If create_vcpu_fd() fails, newly inserted vcpu is removed from the vcpu_array, then destroyed: vcpu->vcpu_idx = atomic_read(&kvm->online_vcpus); r = xa_insert(&kvm->vcpu_array, vcpu->vcpu_idx, vcpu, GFP_KERNEL_ACCOUNT); kvm_get_kvm(kvm); r = create_vcpu_fd(vcpu); if (r < 0) { xa_erase(&kvm->vcpu_array, vcpu->vcpu_idx); kvm_put_kvm_no_destroy(kvm); goto unlock_vcpu_destroy; } atomic_inc(&kvm->online_vcpus); This results in a possible race condition when a reference to a vcpu is acquired (via kvm_get_vcpu() or kvm_for_each_vcpu()) moments before said vcpu is destroyed. Signed-off-by: Michal Luczaj <mhal@rbox.co> Message-Id: <20230510140410.1093987-2-mhal@rbox.co> Cc: stable@vger.kernel.org Fixes: c5b077549136 ("KVM: Convert the kvm->vcpus array to a xarray", 2021-12-08) Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit afb2acb2e3a32e4d56f7fbd819769b98ed1b7520 upstream.

In kvm_vm_ioctl_create_vcpu(), add vcpu to vcpu_array iff it's safe to
access vcpu via kvm_get_vcpu() and kvm_for_each_vcpu(), i.e. when there's
no failure path requiring vcpu removal and destruction. Such order is
important because vcpu_array accessors may end up referencing vcpu at
vcpu_array[0] even before online_vcpus is set to 1.

When online_vcpus=0, any call to kvm_get_vcpu() goes through
array_index_nospec() and ends with an attempt to xa_load(vcpu_array, 0):

	int num_vcpus = atomic_read(&kvm->online_vcpus);
	i = array_index_nospec(i, num_vcpus);
	return xa_load(&kvm->vcpu_array, i);

Similarly, when online_vcpus=0, a kvm_for_each_vcpu() does not iterate over
an "empty" range, but actually [0, ULONG_MAX]:

	xa_for_each_range(&kvm->vcpu_array, idx, vcpup, 0, \
			  (atomic_read(&kvm->online_vcpus) - 1))

In both cases, such online_vcpus=0 edge case, even if leading to
unnecessary calls to XArray API, should not be an issue; requesting
unpopulated indexes/ranges is handled by xa_load() and xa_for_each_range().

However, this means that when the first vCPU is created and inserted in
vcpu_array *and* before online_vcpus is incremented, code calling
kvm_get_vcpu()/kvm_for_each_vcpu() already has access to that first vCPU.

This should not pose a problem assuming that once a vcpu is stored in
vcpu_array, it will remain there, but that's not the case:
kvm_vm_ioctl_create_vcpu() first inserts to vcpu_array, then requests a
file descriptor. If create_vcpu_fd() fails, newly inserted vcpu is removed
from the vcpu_array, then destroyed:

	vcpu->vcpu_idx = atomic_read(&kvm->online_vcpus);
	r = xa_insert(&kvm->vcpu_array, vcpu->vcpu_idx, vcpu, GFP_KERNEL_ACCOUNT);
	kvm_get_kvm(kvm);
	r = create_vcpu_fd(vcpu);
	if (r < 0) {
		xa_erase(&kvm->vcpu_array, vcpu->vcpu_idx);
		kvm_put_kvm_no_destroy(kvm);
		goto unlock_vcpu_destroy;
	}
	atomic_inc(&kvm->online_vcpus);

This results in a possible race condition when a reference to a vcpu is
acquired (via kvm_get_vcpu() or kvm_for_each_vcpu()) moments before said
vcpu is destroyed.

Signed-off-by: Michal Luczaj <mhal@rbox.co>
Message-Id: <20230510140410.1093987-2-mhal@rbox.co>
Cc: stable@vger.kernel.org
Fixes: c5b077549136 ("KVM: Convert the kvm->vcpus array to a xarray", 2021-12-08)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KVM: Register /dev/kvm as the _very_ last thing during initialization 2023-03-10T08:34:11+00:00 Sean Christopherson seanjc@google.com 2022-11-30T23:08:45+00:00 59320074afa4f572057c47bb55cf781bb37abefe commit 2b01281273738bf2d6551da48d65db2df3f28998 upstream. Register /dev/kvm, i.e. expose KVM to userspace, only after all other setup has completed. Once /dev/kvm is exposed, userspace can start invoking KVM ioctls, creating VMs, etc... If userspace creates a VM before KVM is done with its configuration, bad things may happen, e.g. KVM will fail to properly migrate vCPU state if a VM is created before KVM has registered preemption notifiers. Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221130230934.1014142-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 2b01281273738bf2d6551da48d65db2df3f28998 upstream.

Register /dev/kvm, i.e. expose KVM to userspace, only after all other
setup has completed.  Once /dev/kvm is exposed, userspace can start
invoking KVM ioctls, creating VMs, etc...  If userspace creates a VM
before KVM is done with its configuration, bad things may happen, e.g.
KVM will fail to properly migrate vCPU state if a VM is created before
KVM has registered preemption notifiers.

Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KVM: Destroy target device if coalesced MMIO unregistration fails 2023-03-10T08:34:11+00:00 Sean Christopherson seanjc@google.com 2022-12-19T17:19:24+00:00 ccf6a7fb1aedb1472e1241ee55e4d26b68f8d066 commit b1cb1fac22abf102ffeb29dd3eeca208a3869d54 upstream. Destroy and free the target coalesced MMIO device if unregistering said device fails. As clearly noted in the code, kvm_io_bus_unregister_dev() does not destroy the target device. BUG: memory leak unreferenced object 0xffff888112a54880 (size 64): comm "syz-executor.2", pid 5258, jiffies 4297861402 (age 14.129s) hex dump (first 32 bytes): 38 c7 67 15 00 c9 ff ff 38 c7 67 15 00 c9 ff ff 8.g.....8.g..... e0 c7 e1 83 ff ff ff ff 00 30 67 15 00 c9 ff ff .........0g..... backtrace: [<0000000006995a8a>] kmalloc include/linux/slab.h:556 [inline] [<0000000006995a8a>] kzalloc include/linux/slab.h:690 [inline] [<0000000006995a8a>] kvm_vm_ioctl_register_coalesced_mmio+0x8e/0x3d0 arch/x86/kvm/../../../virt/kvm/coalesced_mmio.c:150 [<00000000022550c2>] kvm_vm_ioctl+0x47d/0x1600 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3323 [<000000008a75102f>] vfs_ioctl fs/ioctl.c:46 [inline] [<000000008a75102f>] file_ioctl fs/ioctl.c:509 [inline] [<000000008a75102f>] do_vfs_ioctl+0xbab/0x1160 fs/ioctl.c:696 [<0000000080e3f669>] ksys_ioctl+0x76/0xa0 fs/ioctl.c:713 [<0000000059ef4888>] __do_sys_ioctl fs/ioctl.c:720 [inline] [<0000000059ef4888>] __se_sys_ioctl fs/ioctl.c:718 [inline] [<0000000059ef4888>] __x64_sys_ioctl+0x6f/0xb0 fs/ioctl.c:718 [<000000006444fa05>] do_syscall_64+0x9f/0x4e0 arch/x86/entry/common.c:290 [<000000009a4ed50b>] entry_SYSCALL_64_after_hwframe+0x49/0xbe BUG: leak checking failed Fixes: 5d3c4c79384a ("KVM: Stop looking for coalesced MMIO zones if the bus is destroyed") Cc: stable@vger.kernel.org Reported-by: 柳菁峰 <liujingfeng@qianxin.com> Reported-by: Michal Luczaj <mhal@rbox.co> Link: https://lore.kernel.org/r/20221219171924.67989-1-seanjc@google.com Link: https://lore.kernel.org/all/20230118220003.1239032-1-mhal@rbox.co Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit b1cb1fac22abf102ffeb29dd3eeca208a3869d54 upstream.

Destroy and free the target coalesced MMIO device if unregistering said
device fails.  As clearly noted in the code, kvm_io_bus_unregister_dev()
does not destroy the target device.

  BUG: memory leak
  unreferenced object 0xffff888112a54880 (size 64):
    comm "syz-executor.2", pid 5258, jiffies 4297861402 (age 14.129s)
    hex dump (first 32 bytes):
      38 c7 67 15 00 c9 ff ff 38 c7 67 15 00 c9 ff ff  8.g.....8.g.....
      e0 c7 e1 83 ff ff ff ff 00 30 67 15 00 c9 ff ff  .........0g.....
    backtrace:
      [<0000000006995a8a>] kmalloc include/linux/slab.h:556 [inline]
      [<0000000006995a8a>] kzalloc include/linux/slab.h:690 [inline]
      [<0000000006995a8a>] kvm_vm_ioctl_register_coalesced_mmio+0x8e/0x3d0 arch/x86/kvm/../../../virt/kvm/coalesced_mmio.c:150
      [<00000000022550c2>] kvm_vm_ioctl+0x47d/0x1600 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3323
      [<000000008a75102f>] vfs_ioctl fs/ioctl.c:46 [inline]
      [<000000008a75102f>] file_ioctl fs/ioctl.c:509 [inline]
      [<000000008a75102f>] do_vfs_ioctl+0xbab/0x1160 fs/ioctl.c:696
      [<0000000080e3f669>] ksys_ioctl+0x76/0xa0 fs/ioctl.c:713
      [<0000000059ef4888>] __do_sys_ioctl fs/ioctl.c:720 [inline]
      [<0000000059ef4888>] __se_sys_ioctl fs/ioctl.c:718 [inline]
      [<0000000059ef4888>] __x64_sys_ioctl+0x6f/0xb0 fs/ioctl.c:718
      [<000000006444fa05>] do_syscall_64+0x9f/0x4e0 arch/x86/entry/common.c:290
      [<000000009a4ed50b>] entry_SYSCALL_64_after_hwframe+0x49/0xbe

  BUG: leak checking failed

Fixes: 5d3c4c79384a ("KVM: Stop looking for coalesced MMIO zones if the bus is destroyed")
Cc: stable@vger.kernel.org
Reported-by: 柳菁峰 <liujingfeng@qianxin.com>
Reported-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20221219171924.67989-1-seanjc@google.com
Link: https://lore.kernel.org/all/20230118220003.1239032-1-mhal@rbox.co
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kvm/vfio: Fix potential deadlock on vfio group_lock 2023-02-01T07:34:36+00:00 Yi Liu yi.l.liu@intel.com 2023-01-20T15:05:28+00:00 6eb0fc92eeeef17c0ab64319e551e9e849326b88 [ Upstream commit 51cdc8bc120ef6e42f6fb758341f5d91bc955952 ] Currently it is possible that the final put of a KVM reference comes from vfio during its device close operation. This occurs while the vfio group lock is held; however, if the vfio device is still in the kvm device list, then the following call chain could result in a deadlock: VFIO holds group->group_lock/group_rwsem -> kvm_put_kvm -> kvm_destroy_vm -> kvm_destroy_devices -> kvm_vfio_destroy -> kvm_vfio_file_set_kvm -> vfio_file_set_kvm -> try to hold group->group_lock/group_rwsem The key function is the kvm_destroy_devices() which triggers destroy cb of kvm_device_ops. It calls back to vfio and try to hold group_lock. So if this path doesn't call back to vfio, this dead lock would be fixed. Actually, there is a way for it. KVM provides another point to free the kvm-vfio device which is the point when the device file descriptor is closed. This can be achieved by providing the release cb instead of the destroy cb. Also rename kvm_vfio_destroy() to be kvm_vfio_release(). /* * Destroy is responsible for freeing dev. * * Destroy may be called before or after destructors are called * on emulated I/O regions, depending on whether a reference is * held by a vcpu or other kvm component that gets destroyed * after the emulated I/O. */ void (*destroy)(struct kvm_device *dev); /* * Release is an alternative method to free the device. It is * called when the device file descriptor is closed. Once * release is called, the destroy method will not be called * anymore as the device is removed from the device list of * the VM. kvm->lock is held. */ void (*release)(struct kvm_device *dev); Fixes: 421cfe6596f6 ("vfio: remove VFIO_GROUP_NOTIFY_SET_KVM") Reported-by: Alex Williamson <alex.williamson@redhat.com> Suggested-by: Kevin Tian <kevin.tian@intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Yi Liu <yi.l.liu@intel.com> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Link: https://lore.kernel.org/r/20230114000351.115444-1-mjrosato@linux.ibm.com Link: https://lore.kernel.org/r/20230120150528.471752-1-yi.l.liu@intel.com [aw: update comment as well, s/destroy/release/] Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 
[ Upstream commit 51cdc8bc120ef6e42f6fb758341f5d91bc955952 ]

Currently it is possible that the final put of a KVM reference comes from
vfio during its device close operation.  This occurs while the vfio group
lock is held; however, if the vfio device is still in the kvm device list,
then the following call chain could result in a deadlock:

VFIO holds group->group_lock/group_rwsem
  -> kvm_put_kvm
   -> kvm_destroy_vm
    -> kvm_destroy_devices
     -> kvm_vfio_destroy
      -> kvm_vfio_file_set_kvm
       -> vfio_file_set_kvm
        -> try to hold group->group_lock/group_rwsem

The key function is the kvm_destroy_devices() which triggers destroy cb
of kvm_device_ops. It calls back to vfio and try to hold group_lock. So
if this path doesn't call back to vfio, this dead lock would be fixed.
Actually, there is a way for it. KVM provides another point to free the
kvm-vfio device which is the point when the device file descriptor is
closed. This can be achieved by providing the release cb instead of the
destroy cb. Also rename kvm_vfio_destroy() to be kvm_vfio_release().

	/*
	 * Destroy is responsible for freeing dev.
	 *
	 * Destroy may be called before or after destructors are called
	 * on emulated I/O regions, depending on whether a reference is
	 * held by a vcpu or other kvm component that gets destroyed
	 * after the emulated I/O.
	 */
	void (*destroy)(struct kvm_device *dev);

	/*
	 * Release is an alternative method to free the device. It is
	 * called when the device file descriptor is closed. Once
	 * release is called, the destroy method will not be called
	 * anymore as the device is removed from the device list of
	 * the VM. kvm->lock is held.
	 */
	void (*release)(struct kvm_device *dev);

Fixes: 421cfe6596f6 ("vfio: remove VFIO_GROUP_NOTIFY_SET_KVM")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20230114000351.115444-1-mjrosato@linux.ibm.com
Link: https://lore.kernel.org/r/20230120150528.471752-1-yi.l.liu@intel.com
[aw: update comment as well, s/destroy/release/]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Merge branch 'kvm-dwmw2-fixes' into HEAD 2022-11-23T23:59:45+00:00 Paolo Bonzini pbonzini@redhat.com 2022-11-23T23:52:29+00:00 fe08e36be9ecbf6b38714a77c97b1d25b7a6e4b0 This brings in a few important fixes for Xen emulation. While nobody should be enabling it, the bug effectively allows userspace to read arbitrary memory. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 
This brings in a few important fixes for Xen emulation.
While nobody should be enabling it, the bug effectively
allows userspace to read arbitrary memory.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: Update gfn_to_pfn_cache khva when it moves within the same page 2022-11-23T23:58:46+00:00 David Woodhouse dwmw@amazon.co.uk 2022-11-19T09:25:39+00:00 8332f0ed4f187c7b700831bd7cc83ce180a944b9 In the case where a GPC is refreshed to a different location within the same page, we didn't bother to update it. Mostly we don't need to, but since the ->khva field also includes the offset within the page, that does have to be updated. Fixes: 3ba2c95ea180 ("KVM: Do not incorporate page offset into gfn=>pfn cache user address") Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Paul Durrant <paul@xen.org> Reviewed-by: Sean Christopherson <seanjc@google.com> Cc: stable@kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 
In the case where a GPC is refreshed to a different location within the
same page, we didn't bother to update it. Mostly we don't need to, but
since the ->khva field also includes the offset within the page, that
does have to be updated.

Fixes: 3ba2c95ea180 ("KVM: Do not incorporate page offset into gfn=>pfn cache user address")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Cc: stable@kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: Obey kvm.halt_poll_ns in VMs not using KVM_CAP_HALT_POLL 2022-11-17T15:50:07+00:00 David Matlack dmatlack@google.com 2022-11-17T00:16:57+00:00 9eb8ca049c23afb0410f4a7b9a7158f1a0a3ad0e Obey kvm.halt_poll_ns in VMs not using KVM_CAP_HALT_POLL on every halt, rather than just sampling the module parameter when the VM is first created. This restore the original behavior of kvm.halt_poll_ns for VMs that have not opted into KVM_CAP_HALT_POLL. Notably, this change restores the ability for admins to disable or change the maximum halt-polling time system wide for VMs not using KVM_CAP_HALT_POLL. Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Fixes: acd05785e48c ("kvm: add capability for halt polling") Signed-off-by: David Matlack <dmatlack@google.com> Message-Id: <20221117001657.1067231-4-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 
Obey kvm.halt_poll_ns in VMs not using KVM_CAP_HALT_POLL on every halt,
rather than just sampling the module parameter when the VM is first
created. This restore the original behavior of kvm.halt_poll_ns for VMs
that have not opted into KVM_CAP_HALT_POLL.

Notably, this change restores the ability for admins to disable or
change the maximum halt-polling time system wide for VMs not using
KVM_CAP_HALT_POLL.

Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: acd05785e48c ("kvm: add capability for halt polling")
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20221117001657.1067231-4-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: Avoid re-reading kvm->max_halt_poll_ns during halt-polling 2022-11-17T15:49:14+00:00 David Matlack dmatlack@google.com 2022-11-17T00:16:56+00:00 175d5dc79dcb58d18e11192656eefa27abb3fd33 Avoid re-reading kvm->max_halt_poll_ns multiple times during halt-polling except when it is explicitly useful, e.g. to check if the max time changed across a halt. kvm->max_halt_poll_ns can be changed at any time by userspace via KVM_CAP_HALT_POLL. This bug is unlikely to cause any serious side-effects. In the worst case one halt polls for shorter or longer than it should, and then is fixed up on the next halt. Furthmore, this is still possible since kvm->max_halt_poll_ns are not synchronized with halts. Fixes: acd05785e48c ("kvm: add capability for halt polling") Signed-off-by: David Matlack <dmatlack@google.com> Message-Id: <20221117001657.1067231-3-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 
Avoid re-reading kvm->max_halt_poll_ns multiple times during
halt-polling except when it is explicitly useful, e.g. to check if the
max time changed across a halt. kvm->max_halt_poll_ns can be changed at
any time by userspace via KVM_CAP_HALT_POLL.

This bug is unlikely to cause any serious side-effects. In the worst
case one halt polls for shorter or longer than it should, and then is
fixed up on the next halt. Furthmore, this is still possible since
kvm->max_halt_poll_ns are not synchronized with halts.

Fixes: acd05785e48c ("kvm: add capability for halt polling")
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20221117001657.1067231-3-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM: Cap vcpu->halt_poll_ns before halting rather than after 2022-11-17T15:49:06+00:00 David Matlack dmatlack@google.com 2022-11-17T00:16:55+00:00 97b6847ac10ba753849207e20df74a7c0ea03343 Cap vcpu->halt_poll_ns based on the max halt polling time just before halting, rather than after the last halt. This arguably provides better accuracy if an admin disables halt polling in between halts, although the improvement is nominal. A side-effect of this change is that grow_halt_poll_ns() no longer needs to access vcpu->kvm->max_halt_poll_ns, which will be useful in a future commit where the max halt polling time can come from the module parameter halt_poll_ns instead. Signed-off-by: David Matlack <dmatlack@google.com> Message-Id: <20221117001657.1067231-2-dmatlack@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 
Cap vcpu->halt_poll_ns based on the max halt polling time just before
halting, rather than after the last halt. This arguably provides better
accuracy if an admin disables halt polling in between halts, although
the improvement is nominal.

A side-effect of this change is that grow_halt_poll_ns() no longer needs
to access vcpu->kvm->max_halt_poll_ns, which will be useful in a future
commit where the max halt polling time can come from the module parameter
halt_poll_ns instead.

Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20221117001657.1067231-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Merge tag 'kvmarm-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD 2022-11-06T08:30:49+00:00 Paolo Bonzini pbonzini@redhat.com 2022-11-06T08:25:59+00:00 f4298cac2bfcced49ab308756dc8fef684f3da81 * Fix the pKVM stage-1 walker erronously using the stage-2 accessor * Correctly convert vcpu->kvm to a hyp pointer when generating an exception in a nVHE+MTE configuration * Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them * Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE * Document the boot requirements for FGT when entering the kernel at EL1 
* Fix the pKVM stage-1 walker erronously using the stage-2 accessor

* Correctly convert vcpu->kvm to a hyp pointer when generating
  an exception in a nVHE+MTE configuration

* Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them

* Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE

* Document the boot requirements for FGT when entering the kernel
  at EL1