linux-stable.git/tools, branch v6.6.37

cxl/region: check interleave capability

2024-07-05T07:34:07+00:00

[ Upstream commit 84328c5acebc10c8cdcf17283ab6c6d548885bfc ]

Since interleave capability is not verified, if the interleave
capability of a target does not match the region need, committing decoder
should have failed at the device end.

In order to checkout this error as quickly as possible, driver needs
to check the interleave capability of target during attaching it to
region.

Per CXL specification r3.1(8.2.4.20.1 CXL HDM Decoder Capability Register),
bits 11 and 12 indicate the capability to establish interleaving in 3, 6,
12 and 16 ways. If these bits are not set, the target cannot be attached to
a region utilizing such interleave ways.

Additionally, bits 8 and 9 represent the capability of the bits used for
interleaving in the address, Linux tracks this in the cxl_port
interleave_mask.

Per CXL specification r3.1(8.2.4.20.13 Decoder Protection):
  eIW means encoded Interleave Ways.
  eIG means encoded Interleave Granularity.

  in HPA:
  if eIW is 0 or 8 (interleave ways: 1, 3), all the bits of HPA are used,
  the interleave bits are none, the following check is ignored.

  if eIW is less than 8 (interleave ways: 2, 4, 8, 16), the interleave bits
  start at bit position eIG + 8 and end at eIG + eIW + 8 - 1.

  if eIW is greater than 8 (interleave ways: 6, 12), the interleave bits
  start at bit position eIG + 8 and end at eIG + eIW - 1.

  if the interleave mask is insufficient to cover the required interleave
  bits, the target cannot be attached to the region.

Fixes: 384e624bb211 ("cxl/region: Attach endpoint decoders")
Signed-off-by: Yao Xingtao 
Reviewed-by: Dan Williams 
Reviewed-by: Jonathan Cameron 
Link: https://patch.msgid.link/20240614084755.59503-2-yaoxt.fnst@fujitsu.com
Signed-off-by: Dave Jiang 
Signed-off-by: Sasha Levin

selftests: mptcp: userspace_pm: fixed subtest names

2024-07-05T07:33:44+00:00

[ Upstream commit e874557fce1b6023efafd523aee0c347bf7f1694 ]

It is important to have fixed (sub)test names in TAP, because these
names are used to identify them. If they are not fixed, tracking cannot
be done.

Some subtests from the userspace_pm selftest were using random numbers
in their names: the client and server address IDs from $RANDOM, and the
client port number randomly picked by the kernel when creating the
connection. These values have been replaced by 'client' and 'server'
words: that's even more helpful than showing random numbers. Note that
the addresses IDs are incremented and decremented in the test: +1 or -1
are then displayed in these cases.

Not to loose info that can be useful for debugging in case of issues,
these random numbers are now displayed at the beginning of the test.

Fixes: f589234e1af0 ("selftests: mptcp: userspace_pm: format subtests results in TAP")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) 
Reviewed-by: Simon Horman 
Link: https://lore.kernel.org/r/20240614-upstream-net-20240614-selftests-mptcp-uspace-pm-fixed-test-names-v1-1-460ad3edb429@kernel.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

selftests: mptcp: print_test out of verify_listener_events

2024-07-05T07:33:44+00:00

[ Upstream commit 8ebb44196585d3c9405fba1e409cf2312bca30ac ]

verify_listener_events() helper will be exported into mptcp_lib.sh as a
public function, but print_test() is invoked in it, which is a private
function in userspace_pm.sh only. So this patch moves print_test() out of
verify_listener_events().

Signed-off-by: Geliang Tang 
Reviewed-by: Matthieu Baerts (NGI0) 
Signed-off-by: Matthieu Baerts (NGI0) 
Link: https://lore.kernel.org/r/20240308-upstream-net-next-20240308-selftests-mptcp-unification-v1-12-4f42c347b653@kernel.org
Signed-off-by: Jakub Kicinski 
Stable-dep-of: e874557fce1b ("selftests: mptcp: userspace_pm: fixed subtest names")
Signed-off-by: Sasha Levin

perf script: Show also errors for --insn-trace option

2024-06-27T11:49:14+00:00

[ Upstream commit d4a98b45fbe6d06f4b79ed90d0bb05ced8674c23 ]

The trace could be misleading if trace errors are not taken into
account, so display them also by adding the itrace "e" option.

Note --call-trace and --call-ret-trace already add the itrace "e"
option.

Fixes: b585ebdb5912cf14 ("perf script: Add --insn-trace for instruction decoding")
Reviewed-by: Andi Kleen 
Signed-off-by: Adrian Hunter 
Cc: Andi Kleen 
Cc: Ian Rogers 
Cc: Jiri Olsa 
Cc: Namhyung Kim 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240315071334.3478-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin

perf: script: add raw|disasm arguments to --insn-trace option

2024-06-27T11:49:14+00:00

[ Upstream commit 6750ba4b6442fa5ea4bf5c0e4b4ff8b0249ef71d ]

Now '--insn-trace' accept a argument to specify the output format:
  - raw: display raw instructions.
  - disasm: display mnemonic instructions (if capstone is installed).

$ sudo perf script --insn-trace=raw
              ls 1443864 [006] 2275506.209908875:      7f216b426100 _start+0x0 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) insn: 48 89 e7
              ls 1443864 [006] 2275506.209908875:      7f216b426103 _start+0x3 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) insn: e8 e8 0c 00 00
              ls 1443864 [006] 2275506.209908875:      7f216b426df0 _dl_start+0x0 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) insn: f3 0f 1e fa

$ sudo perf script --insn-trace=disasm
              ls 1443864 [006] 2275506.209908875:      7f216b426100 _start+0x0 (/usr/lib/x86_64-linux-gnu/ld-2.31.so)		movq %rsp, %rdi
              ls 1443864 [006] 2275506.209908875:      7f216b426103 _start+0x3 (/usr/lib/x86_64-linux-gnu/ld-2.31.so)		callq _dl_start+0x0
              ls 1443864 [006] 2275506.209908875:      7f216b426df0 _dl_start+0x0 (/usr/lib/x86_64-linux-gnu/ld-2.31.so)	illegal instruction
              ls 1443864 [006] 2275506.209908875:      7f216b426df4 _dl_start+0x4 (/usr/lib/x86_64-linux-gnu/ld-2.31.so)	pushq %rbp
              ls 1443864 [006] 2275506.209908875:      7f216b426df5 _dl_start+0x5 (/usr/lib/x86_64-linux-gnu/ld-2.31.so)	movq %rsp, %rbp
              ls 1443864 [006] 2275506.209908875:      7f216b426df8 _dl_start+0x8 (/usr/lib/x86_64-linux-gnu/ld-2.31.so)	pushq %r15

Signed-off-by: Changbin Du 
Reviewed-by: Adrian Hunter 
Cc: changbin.du@gmail.com
Cc: Thomas Richter 
Cc: Andi Kleen 
Signed-off-by: Namhyung Kim 
Link: https://lore.kernel.org/r/20240217074046.4100789-5-changbin.du@huawei.com
Stable-dep-of: d4a98b45fbe6 ("perf script: Show also errors for --insn-trace option")
Signed-off-by: Sasha Levin

selftests: openvswitch: Use bash as interpreter

2024-06-27T11:49:07+00:00

[ Upstream commit e2b447c9a1bba718f9c07513a1e8958209e862a1 ]

openvswitch.sh makes use of substitutions of the form ${ns:0:1}, to
obtain the first character of $ns. Empirically, this is works with bash
but not dash. When run with dash these evaluate to an empty string and
printing an error to stdout.

 # dash -c 'ns=client; echo "${ns:0:1}"' 2>error
 # cat error
 dash: 1: Bad substitution
 # bash -c 'ns=client; echo "${ns:0:1}"' 2>error
 c
 # cat error

This leads to tests that neither pass nor fail.
F.e.

 TEST: arp_ping                                                      [START]
 adding sandbox 'test_arp_ping'
 Adding DP/Bridge IF: sbx:test_arp_ping dp:arpping {, , }
 create namespaces
 ./openvswitch.sh: 282: eval: Bad substitution
 TEST: ct_connect_v4                                                 [START]
 adding sandbox 'test_ct_connect_v4'
 Adding DP/Bridge IF: sbx:test_ct_connect_v4 dp:ct4 {, , }
 ./openvswitch.sh: 322: eval: Bad substitution
 create namespaces

Resolve this by making openvswitch.sh a bash script.

Fixes: 918423fda910 ("selftests: openvswitch: add an initial flow programming case")
Signed-off-by: Simon Horman 
Reviewed-by: Przemek Kitszel 
Link: https://lore.kernel.org/r/20240617-ovs-selftest-bash-v1-1-7ae6ccd3617b@kernel.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

kselftest: arm64: Add a null pointer check

2024-06-27T11:49:02+00:00

[ Upstream commit 80164282b3620a3cb73de6ffda5592743e448d0e ]

There is a 'malloc' call, which can be unsuccessful.
This patch will add the malloc failure checking
to avoid possible null dereference and give more information
about test fail reasons.

Signed-off-by: Kunwu Chan 
Reviewed-by: Muhammad Usama Anjum 
Link: https://lore.kernel.org/r/20240423082102.2018886-1-chentao@kylinos.cn
Signed-off-by: Will Deacon 
Signed-off-by: Sasha Levin

selftests/bpf: Fix flaky test btf_map_in_map/lookup_update

2024-06-27T11:49:01+00:00

[ Upstream commit 14bb1e8c8d4ad5d9d2febb7d19c70a3cf536e1e5 ]

Recently, I frequently hit the following test failure:

  [root@arch-fb-vm1 bpf]# ./test_progs -n 33/1
  test_lookup_update:PASS:skel_open 0 nsec
  [...]
  test_lookup_update:PASS:sync_rcu 0 nsec
  test_lookup_update:FAIL:map1_leak inner_map1 leaked!
  #33/1    btf_map_in_map/lookup_update:FAIL
  #33      btf_map_in_map:FAIL

In the test, after map is closed and then after two rcu grace periods,
it is assumed that map_id is not available to user space.

But the above assumption cannot be guaranteed. After zero or one
or two rcu grace periods in different siturations, the actual
freeing-map-work is put into a workqueue. Later on, when the work
is dequeued, the map will be actually freed.
See bpf_map_put() in kernel/bpf/syscall.c.

By using workqueue, there is no ganrantee that map will be actually
freed after a couple of rcu grace periods. This patch removed
such map leak detection and then the test can pass consistently.

Signed-off-by: Yonghong Song 
Signed-off-by: Daniel Borkmann 
Link: https://lore.kernel.org/bpf/20240322061353.632136-1-yonghong.song@linux.dev
Signed-off-by: Sasha Levin

selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh

2024-06-27T11:49:01+00:00

[ Upstream commit f803bcf9208a2540acb4c32bdc3616673169f490 ]

In some systems, the netcat server can incur in delay to start listening.
When this happens, the test can randomly fail in various points.
This is an example error message:

   # ip gre none gso
   # encap 192.168.1.1 to 192.168.1.2, type gre, mac none len 2000
   # test basic connectivity
   # Ncat: Connection refused.

The issue stems from a race condition between the netcat client and server.
The test author had addressed this problem by implementing a sleep, which
I have removed in this patch.
This patch introduces a function capable of sleeping for up to two seconds.
However, it can terminate the waiting period early if the port is reported
to be listening.

Signed-off-by: Alessandro Carminati (Red Hat) 
Signed-off-by: Andrii Nakryiko 
Link: https://lore.kernel.org/bpf/20240314105911.213411-1-alessandro.carminati@gmail.com
Signed-off-by: Sasha Levin

selftests: net: lib: avoid error removing empty netns name

2024-06-21T12:38:48+00:00

commit 79322174bcc780b99795cb89d237b26006a8b94b upstream.

If there is an error to create the first netns with 'setup_ns()',
'cleanup_ns()' will be called with an empty string as first parameter.

The consequences is that 'cleanup_ns()' will try to delete an invalid
netns, and wait 20 seconds if the netns list is empty.

Instead of just checking if the name is not empty, convert the string
separated by spaces to an array. Manipulating the array is cleaner, and
calling 'cleanup_ns()' with an empty array will be a no-op.

Fixes: 25ae948b4478 ("selftests/net: add lib.sh")
Cc: stable@vger.kernel.org
Acked-by: Geliang Tang 
Signed-off-by: Matthieu Baerts (NGI0) 
Reviewed-by: Petr Machata 
Reviewed-by: Hangbin Liu 
Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-2-b3afadd368c9@kernel.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman