linux-stable.git/tools, branch v6.6.153

selftests: mptcp: join: mark tests with data corruption as failed

2026-08-23T12:19:56+00:00

commit ca318e7bbb7723f57bcd9e69a2873b5884435552 upstream.

check_transfer() compares the input and output files byte-by-byte using
`cmp -l "$in" "$out" | while read ...`. Because the while-loop body runs
in a subshell (the script sets neither lastpipe nor pipefail), the
fail_test call inside it -- which sets the global ret/last_test_failed --
and the `return 1` both act on the subshell, not on check_transfer().

check_transfer() thus always falls through to `return 0`, and any data
corruption affecting only the payload (leaving the subflow/PM counters
untouched) is silently reported as PASS.

Fixes: 8117dac3e7c3 ("selftests: mptcp: add invert check in check_transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Gang Yan 
Reviewed-by: Matthieu Baerts (NGI0) 
Signed-off-by: Matthieu Baerts (NGI0) 
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-5-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Greg Kroah-Hartman

selftests/bpf: Adapt sockmap update error handling

2026-08-19T16:13:11+00:00

[ Upstream commit 30581eda4a07ff15db623612cac578e81869e96f ]

Update sockmap_listen to accommodate the recent change in sockmap that
rejects unbound UDP sockets.

TCP: Reject unbound and bound (unless established or listening).
UDP: Accept only bound sockets.

While at it, migrate to ASSERT_* and enforce reverse xmas tree.

Signed-off-by: Michal Luczaj 
Reviewed-by: Kuniyuki Iwashima 
Reviewed-by: Jakub Sitnicki 
Link: https://lore.kernel.org/bpf/20260707-sockmap-lookup-udp-leak-v4-3-f878346f27ab@rbox.co
Signed-off-by: Kumar Kartikeya Dwivedi 
Signed-off-by: Sasha Levin

selftests/ftrace: refactor eprobes test to fix argument checks

2026-08-19T16:13:07+00:00

[ Upstream commit 6e3abef2a27e7402a94111c9eff85d887e64a309 ]

The add/remove eprobe test installs an eprobe for the openat syscall and
runs ls. It checks the filenames that were opened by ls against a
whitelist and a blacklist.

Commit 206b25c09080 ("tracing: eprobe: read the complete FILTER_PTR_STRING
pointer") fixed access to some string fields in eprobes. This triggers
test failures as the blacklist does not allow relative paths for the
openat parameters.

What makes this test unstable is the fact that the openat calls vary a
lot between different systems.

Refactor the test to make it more robust. "cd " will issue a
chdir syscall with the target directory as parameter. Set an eprobe on
the sys_enter_chdir event and filter for the exact directory name. Allow
(fault) as fallback.

Link: https://lore.kernel.org/all/20260804194705.760893-1-martin@kaiser.cx/

Fixes: 206b25c09080 ("tracing: eprobe: read the complete FILTER_PTR_STRING pointer")
Reported-by: kernel test robot 
Closes: https://lore.kernel.org/oe-lkp/202607151010.b68428e1-lkp@intel.com
Signed-off-by: Martin Kaiser 
Signed-off-by: Masami Hiramatsu (Google) 
Signed-off-by: Sasha Levin

selftests/bpf: Fail unbound UDP on sockmap update

2026-08-19T16:13:04+00:00

[ Upstream commit 203b06932777b9ad5085319389dea566f5c2ca63 ]

sockmap now rejects unbound UDP sockets. Adjust test_maps. While at it,
check socket()'s return value.

This effectively reverts commit c39aa2159974 ("bpf, selftests: Fix
test_maps now that sockmap supports UDP").

Signed-off-by: Michal Luczaj 
Reviewed-by: Kuniyuki Iwashima 
Reviewed-by: Jakub Sitnicki 
Link: https://lore.kernel.org/bpf/20260707-sockmap-lookup-udp-leak-v4-4-f878346f27ab@rbox.co
Signed-off-by: Kumar Kartikeya Dwivedi 
Signed-off-by: Ricardo B. Marlière (SUSE) 
Signed-off-by: Sasha Levin

selftests/clone3: fix wild pointer access of getline due to missing init

2026-08-09T18:21:55+00:00

commit 8f6f9fd93cd7a5dd607ad5cd910476dd68fff3ed upstream.

Patch series "selftests: Add missing initalization of pointer passed to
getline", v2.


This patch (of 2):

Clone3_set_tid uses getline(&line, ...) in a loop to read the child's
process status.  The code expects that getline allocates the buffer for
the line on the first loop iteration.  According to the Open Group
Spec[1], char *line has to be null pointer for this:

> ssize_t getline(char **restrict lineptr, ...);
> If *lineptr is a null pointer or if the object pointed to by *lineptr
> is of insufficient size, an object shall be allocated as if by
malloc()
> or the object shall be reallocated as if by realloc()[...].

However, char *line is only declared, leading to an undefined value that
is potentially non-null.  In an example run with Musl v1.2.6, the realloc
call[2] of getdelim, which implements getline, triggers a segfault:

./run_kselftest.sh --test clone3:clone3_set_tid
[ 1366.165898] kselftest: Running tests in clone3
...
[ 1367.799244] clone3_set_tid[811]: unhandled signal 11 code 0x1 at
0x0000000000000000 in libc.so[68184,3fbf69f000+4c000]
[ 1367.802808] CPU: 0 UID: 0 PID: 811 Comm: clone3_set_tid Not tainted
..
[ 1367.804188]  epc: 0x0000003fbf6b0184
[ 1367.804188]  ra : 0x0000003fbf6d4664
[ 1367.804188]  sp : 0x0000003fce5f2e40
[ 1367.805314]  gp : 0x0000002aaab0dfb8
[ 1367.805314]  tp : 0x0000003fbf6f14a8
[ 1367.805314]  t0 : 0x0000003fbf63d000
...

Looking at the realloc implementation, Musl mallocs for a null pointer
memory.  But for a non-null pointer, it assumes it's passed a valid
pointer to the heap and tries to access its meta-data.  This leads to the
segfault we see:

void *realloc(void *p, size_t n)
{
        if (!p) return malloc(n);
        if (size_overflows(n)) return 0;

        struct meta *g = get_meta(p);
        ...
}

Fix this by properly initializing the line pointer to NULL.

Link: https://lore.kernel.org/20260722130246.2135563-1-christian.gellermann@codasip.com
Link: https://lore.kernel.org/20260722130246.2135563-2-christian.gellermann@codasip.com
Link: https://pubs.opengroup.org/onlinepubs/9799919799/functions/getline.html [1]
Link: https://git.musl-libc.org/cgit/musl/tree/src/stdio/getdelim.c#n38 [2]
Fixes: 41585bbeeef9 ("selftests: add tests for clone3() with *set_tid")
Signed-off-by: Chris Gellermann 
Acked-by: David Hildenbrand (arm) 
Reviewed-by: Lorenzo Stoakes 
Cc: Christian Brauner 
Cc: Liam R. Howlett 
Cc: Lorenzo Stoakes 
Cc: Michal Hocko 
Cc: Mike Rapoport 
Cc: Shuah Khan 
Cc: Suren Baghdasaryan 
Cc: Vlastimil Babka 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Greg Kroah-Hartman

selftests/mm: fix potential wild pointer access of getline due to missing init

2026-08-09T18:21:55+00:00

commit 9f1d75a4ce04095afdb63d8e540092ff8151dacf upstream.

This is another occurrence of using getline where the code assumes that
getline allocates memory to store the line, but the pointer passed to it
is uninitialized and potentially a non-null pointer.  This violates the
Open Group Spec[1] and caused a segfault in a similar situation in
selftest/clone3/clone3_set_tid.  Fix it by initializing the line pointer
to NULL.

The issue has been found by simply grepping through the selftest code
after running into the issue in clone3_set_tid.  Whether it segfaults in
its current state is unknown to me.  But it's good to be addressed due to
defensive reasons.

Link: https://lore.kernel.org/20260722130246.2135563-3-christian.gellermann@codasip.com
Link: https://pubs.opengroup.org/onlinepubs/9799919799/functions/getline.html [1]
Fixes: 26b4224d9961 ("selftests: expanding more mlock selftest")
Signed-off-by: Chris Gellermann 
Acked-by: David Hildenbrand (arm) 
Reviewed-by: Lorenzo Stoakes 
Cc: Christian Brauner 
Cc: Liam R. Howlett 
Cc: Michal Hocko 
Cc: Mike Rapoport 
Cc: Shuah Khan 
Cc: Suren Baghdasaryan 
Cc: Vlastimil Babka 
Cc: 
Signed-off-by: Andrew Morton 
Signed-off-by: Greg Kroah-Hartman

selftests: openvswitch: add config file

2026-08-03T09:15:21+00:00

[ Upstream commit 441a820ccef9af80a9ac5a4c85b9c396e595967c ]

The kselftests doc mentions that a config file should be present "if a
test needs specific kernel config options enabled". This selftest
requires some kernel config, but no config file was provided.

We could say that a sub-target could use the parent's config file, but
the kselftests doc doesn't mention anything about that. Plus the
net/openvswitch target is the only net target without a config file.

Here is a new config file, which is a trimmed version of the net one,
with hopefully the minimal required kconfig on top of 'make defconfig'.

The Fixes tag points to the introduction of the net/openvswitch target,
just to help validating this target on stable kernels.

Fixes: 25f16c873fb1 ("selftests: add openvswitch selftest suite")
Signed-off-by: Matthieu Baerts (NGI0) 
Reviewed-by: Eelco Chaudron 
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-2-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

selftests: af_unix: add USER_NS config

2026-08-03T09:15:21+00:00

[ Upstream commit f8b1abed736111f914b2c567d9a3db1f71e788e8 ]

This is required to use unshare(CLONE_NEWUSER).

This has not been seen on NIPA before, because the 'af_unix' tests are
executed with the 'net' ones, merging their config files. USER_NS is
present in tools/testing/selftests/net/config.

This issue is visible when only the af_unix config is used on top of the
default one. This is the recommended way to execute selftest targets.

Fixes: ac011361bd4f ("af_unix: Add test for sock_diag and UDIAG_SHOW_UID.")
Signed-off-by: Matthieu Baerts (NGI0) 
Reviewed-by: Kuniyuki Iwashima 
Link: https://patch.msgid.link/20260710-net-sft-fix-containers-v1-1-a2915c294ef5@kernel.org
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

selftest: af_unix: Add Kconfig file.

2026-08-03T09:15:20+00:00

[ Upstream commit 11b006d6896c0471ad29c6f1fb1af606e7ba278f ]

diag_uid selftest failed on NIPA where the received nlmsg_type is
NLMSG_ERROR [0] because CONFIG_UNIX_DIAG is not set [1] by default
and sock_diag_lock_handler() failed to load the module.

  # # Starting 2 tests from 2 test cases.
  # #  RUN           diag_uid.uid.1 ...
  # # diag_uid.c:159:1:Expected nlh->nlmsg_type (2) == SOCK_DIAG_BY_FAMILY (20)
  # # 1: Test terminated by assertion
  # #          FAIL  diag_uid.uid.1
  # not ok 1 diag_uid.uid.1

Let's add all AF_UNIX Kconfig to the config file under af_unix dir
so that NIPA consumes it.

Fixes: ac011361bd4f ("af_unix: Add test for sock_diag and UDIAG_SHOW_UID.")
Link: https://netdev-3.bots.linux.dev/vmksft-net/results/644841/104-diag-uid/stdout [0]
Link: https://netdev-3.bots.linux.dev/vmksft-net/results/644841/config [1]
Reported-by: Jakub Kicinski 
Closes: https://lore.kernel.org/netdev/20240617073033.0cbb829d@kernel.org/
Signed-off-by: Kuniyuki Iwashima 
Signed-off-by: David S. Miller 
Stable-dep-of: f8b1abed7361 ("selftests: af_unix: add USER_NS config")
Signed-off-by: Sasha Levin

selftests/alsa: Fix memory leak in find_controls error path

2026-08-03T09:15:13+00:00

[ Upstream commit cb89f0c1aed02eb233c4271f76f830b37e222ff6 ]

In find_controls(), card_data is allocated with malloc() but when
snd_ctl_open_lconf() fails, the code jumps to next_card without
freeing the allocated memory. This results in a memory leak for
each card where snd_ctl_open_lconf() fails.

Add free(card_data) before goto next_card to ensure proper cleanup
of the allocated memory in the error path.

Fixes: 5aaf9efffc57 ("kselftest: alsa: Add simplistic test for ALSA mixer controls kselftest")
Signed-off-by: Malaya Kumar Rout 
Link: https://patch.msgid.link/20260704105736.94874-1-malayarout91@gmail.com
Signed-off-by: Takashi Iwai 
Signed-off-by: Sasha Levin