<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/tools, branch v6.3.12</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>Revert "cxl/port: Enable the HDM decoder capability for switch ports"</title>
<updated>2023-07-05T17:29:23+00:00</updated>
<author>
<name>Dan Williams</name>
<email>dan.j.williams@intel.com</email>
</author>
<published>2023-06-15T19:53:40+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=e9e1fdf5304ebfe24ca6799f5d5c1cb60f2a712b'/>
<id>e9e1fdf5304ebfe24ca6799f5d5c1cb60f2a712b</id>
<content type='text'>
commit 8f0220af58c3b73e9041377a23708d37600b33c1 upstream.

commit eb0764b822b9 ("cxl/port: Enable the HDM decoder capability for switch ports")

...was added on the observation of CXL memory not being accessible after
setting up a region on a "cold-plugged" device. A "cold-plugged" CXL
device is one that was not present at boot, so platform-firmware/BIOS
has no chance to set it up.

While it is true that the debug found the enable bit clear in the
host-bridge's instance of the global control register (CXL 3.0
8.2.4.19.2 CXL HDM Decoder Global Control Register), that bit is
described as:

"This bit is only applicable to CXL.mem devices and shall
return 0 on CXL Host Bridges and Upstream Switch Ports."

So it is meant to be zero, and further testing confirmed that this "fix"
had no effect on the failure. Revert it, and be more vigilant about
proposed fixes in the future. Since the original copied stable@, flag
this revert for stable@ as well.

Cc: &lt;stable@vger.kernel.org&gt;
Fixes: eb0764b822b9 ("cxl/port: Enable the HDM decoder capability for switch ports")
Reviewed-by: Jonathan Cameron &lt;Jonathan.Cameron@huawei.com&gt;
Reviewed-by: Dave Jiang &lt;dave.jiang@intel.com&gt;
Link: https://lore.kernel.org/r/168685882012.3475336.16733084892658264991.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams &lt;dan.j.williams@intel.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 8f0220af58c3b73e9041377a23708d37600b33c1 upstream.

commit eb0764b822b9 ("cxl/port: Enable the HDM decoder capability for switch ports")

...was added on the observation of CXL memory not being accessible after
setting up a region on a "cold-plugged" device. A "cold-plugged" CXL
device is one that was not present at boot, so platform-firmware/BIOS
has no chance to set it up.

While it is true that the debug found the enable bit clear in the
host-bridge's instance of the global control register (CXL 3.0
8.2.4.19.2 CXL HDM Decoder Global Control Register), that bit is
described as:

"This bit is only applicable to CXL.mem devices and shall
return 0 on CXL Host Bridges and Upstream Switch Ports."

So it is meant to be zero, and further testing confirmed that this "fix"
had no effect on the failure. Revert it, and be more vigilant about
proposed fixes in the future. Since the original copied stable@, flag
this revert for stable@ as well.

Cc: &lt;stable@vger.kernel.org&gt;
Fixes: eb0764b822b9 ("cxl/port: Enable the HDM decoder capability for switch ports")
Reviewed-by: Jonathan Cameron &lt;Jonathan.Cameron@huawei.com&gt;
Reviewed-by: Dave Jiang &lt;dave.jiang@intel.com&gt;
Link: https://lore.kernel.org/r/168685882012.3475336.16733084892658264991.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams &lt;dan.j.williams@intel.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>tools/virtio: Fix arm64 ringtest compilation error</title>
<updated>2023-06-28T09:14:23+00:00</updated>
<author>
<name>Rong Tao</name>
<email>rongtao@cestc.cn</email>
</author>
<published>2023-05-24T12:31:24+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=8ec977a9d3bb5e960646c8b689dbbcf027d4b040'/>
<id>8ec977a9d3bb5e960646c8b689dbbcf027d4b040</id>
<content type='text'>
[ Upstream commit 57380fd1249b20ef772549af2c58ef57b21faba7 ]

Add cpu_relax() for arm64 instead of directly assert(), and add assert.h
header file. Also, add smp_wmb and smp_mb for arm64.

Compilation error as follows, avoid __always_inline undefined.

    $ make
    cc -Wall -pthread -O2 -ggdb -flto -fwhole-program -c -o ring.o ring.c
    In file included from ring.c:10:
    main.h: In function ‘busy_wait’:
    main.h:99:21: warning: implicit declaration of function ‘assert’
    [-Wimplicit-function-declaration]
    99 | #define cpu_relax() assert(0)
        |                     ^~~~~~
    main.h:107:17: note: in expansion of macro ‘cpu_relax’
    107 |                 cpu_relax();
        |                 ^~~~~~~~~
    main.h:12:1: note: ‘assert’ is defined in header ‘&lt;assert.h&gt;’; did you
    forget to ‘#include &lt;assert.h&gt;’?
    11 | #include &lt;stdbool.h&gt;
    +++ |+#include &lt;assert.h&gt;
    12 |
    main.h: At top level:
    main.h:143:23: error: expected ‘;’ before ‘void’
    143 | static __always_inline
        |                       ^
        |                       ;
    144 | void __read_once_size(const volatile void *p, void *res, int
    size)
        | ~~~~
    main.h:158:23: error: expected ‘;’ before ‘void’
    158 | static __always_inline void __write_once_size(volatile void *p,
    void *res, int size)
        |                       ^~~~~
        |                       ;
    make: *** [&lt;builtin&gt;: ring.o] Error 1

Signed-off-by: Rong Tao &lt;rongtao@cestc.cn&gt;
Message-Id: &lt;tencent_F53E159DD7925174445D830DA19FACF44B07@qq.com&gt;
Signed-off-by: Michael S. Tsirkin &lt;mst@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 57380fd1249b20ef772549af2c58ef57b21faba7 ]

Add cpu_relax() for arm64 instead of directly assert(), and add assert.h
header file. Also, add smp_wmb and smp_mb for arm64.

Compilation error as follows, avoid __always_inline undefined.

    $ make
    cc -Wall -pthread -O2 -ggdb -flto -fwhole-program -c -o ring.o ring.c
    In file included from ring.c:10:
    main.h: In function ‘busy_wait’:
    main.h:99:21: warning: implicit declaration of function ‘assert’
    [-Wimplicit-function-declaration]
    99 | #define cpu_relax() assert(0)
        |                     ^~~~~~
    main.h:107:17: note: in expansion of macro ‘cpu_relax’
    107 |                 cpu_relax();
        |                 ^~~~~~~~~
    main.h:12:1: note: ‘assert’ is defined in header ‘&lt;assert.h&gt;’; did you
    forget to ‘#include &lt;assert.h&gt;’?
    11 | #include &lt;stdbool.h&gt;
    +++ |+#include &lt;assert.h&gt;
    12 |
    main.h: At top level:
    main.h:143:23: error: expected ‘;’ before ‘void’
    143 | static __always_inline
        |                       ^
        |                       ;
    144 | void __read_once_size(const volatile void *p, void *res, int
    size)
        | ~~~~
    main.h:158:23: error: expected ‘;’ before ‘void’
    158 | static __always_inline void __write_once_size(volatile void *p,
    void *res, int size)
        |                       ^~~~~
        |                       ;
    make: *** [&lt;builtin&gt;: ring.o] Error 1

Signed-off-by: Rong Tao &lt;rongtao@cestc.cn&gt;
Message-Id: &lt;tencent_F53E159DD7925174445D830DA19FACF44B07@qq.com&gt;
Signed-off-by: Michael S. Tsirkin &lt;mst@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests: forwarding: Fix race condition in mirror installation</title>
<updated>2023-06-28T09:14:16+00:00</updated>
<author>
<name>Danielle Ratson</name>
<email>danieller@nvidia.com</email>
</author>
<published>2023-06-20T12:45:15+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=37ed1d3519853373cbd07654eecb7b98cc21a079'/>
<id>37ed1d3519853373cbd07654eecb7b98cc21a079</id>
<content type='text'>
[ Upstream commit c7c059fba6fb19c3bc924925c984772e733cb594 ]

When mirroring to a gretap in hardware the device expects to be
programmed with the egress port and all the encapsulating headers. This
requires the driver to resolve the path the packet will take in the
software data path and program the device accordingly.

If the path cannot be resolved (in this case because of an unresolved
neighbor), then mirror installation fails until the path is resolved.
This results in a race that causes the test to sometimes fail.

Fix this by setting the neighbor's state to permanent in a couple of
tests, so that it is always valid.

Fixes: 35c31d5c323f ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1d")
Fixes: 239e754af854 ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q")
Signed-off-by: Danielle Ratson &lt;danieller@nvidia.com&gt;
Reviewed-by: Petr Machata &lt;petrm@nvidia.com&gt;
Signed-off-by: Petr Machata &lt;petrm@nvidia.com&gt;
Link: https://lore.kernel.org/r/268816ac729cb6028c7a34d4dda6f4ec7af55333.1687264607.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni &lt;pabeni@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit c7c059fba6fb19c3bc924925c984772e733cb594 ]

When mirroring to a gretap in hardware the device expects to be
programmed with the egress port and all the encapsulating headers. This
requires the driver to resolve the path the packet will take in the
software data path and program the device accordingly.

If the path cannot be resolved (in this case because of an unresolved
neighbor), then mirror installation fails until the path is resolved.
This results in a race that causes the test to sometimes fail.

Fix this by setting the neighbor's state to permanent in a couple of
tests, so that it is always valid.

Fixes: 35c31d5c323f ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1d")
Fixes: 239e754af854 ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q")
Signed-off-by: Danielle Ratson &lt;danieller@nvidia.com&gt;
Reviewed-by: Petr Machata &lt;petrm@nvidia.com&gt;
Signed-off-by: Petr Machata &lt;petrm@nvidia.com&gt;
Link: https://lore.kernel.org/r/268816ac729cb6028c7a34d4dda6f4ec7af55333.1687264607.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni &lt;pabeni@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests: net: fcnal-test: check if FIPS mode is enabled</title>
<updated>2023-06-28T09:14:12+00:00</updated>
<author>
<name>Magali Lemes</name>
<email>magali.lemes@canonical.com</email>
</author>
<published>2023-06-13T12:32:22+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=7c8c796b308cff9337f1ab9d860125f774f00746'/>
<id>7c8c796b308cff9337f1ab9d860125f774f00746</id>
<content type='text'>
[ Upstream commit d7a2fc1437f71cb058c7b11bc33dfc19e4bf277a ]

There are some MD5 tests which fail when the kernel is in FIPS mode,
since MD5 is not FIPS compliant. Add a check and only run those tests
if FIPS mode is not enabled.

Fixes: f0bee1ebb5594 ("fcnal-test: Add TCP MD5 tests")
Fixes: 5cad8bce26e01 ("fcnal-test: Add TCP MD5 tests for VRF")
Reviewed-by: David Ahern &lt;dsahern@kernel.org&gt;
Signed-off-by: Magali Lemes &lt;magali.lemes@canonical.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit d7a2fc1437f71cb058c7b11bc33dfc19e4bf277a ]

There are some MD5 tests which fail when the kernel is in FIPS mode,
since MD5 is not FIPS compliant. Add a check and only run those tests
if FIPS mode is not enabled.

Fixes: f0bee1ebb5594 ("fcnal-test: Add TCP MD5 tests")
Fixes: 5cad8bce26e01 ("fcnal-test: Add TCP MD5 tests for VRF")
Reviewed-by: David Ahern &lt;dsahern@kernel.org&gt;
Signed-off-by: Magali Lemes &lt;magali.lemes@canonical.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests: net: vrf-xfrm-tests: change authentication and encryption algos</title>
<updated>2023-06-28T09:14:12+00:00</updated>
<author>
<name>Magali Lemes</name>
<email>magali.lemes@canonical.com</email>
</author>
<published>2023-06-13T12:32:21+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=74eba3fddf996008944a7d4a9a34d9a8937fddbf'/>
<id>74eba3fddf996008944a7d4a9a34d9a8937fddbf</id>
<content type='text'>
[ Upstream commit cb43c60e64ca67fcc9d23bd08f51d2ab8209d9d7 ]

The vrf-xfrm-tests tests use the hmac(md5) and cbc(des3_ede)
algorithms for performing authentication and encryption, respectively.
This causes the tests to fail when fips=1 is set, since these algorithms
are not allowed in FIPS mode. Therefore, switch from hmac(md5) and
cbc(des3_ede) to hmac(sha1) and cbc(aes), which are FIPS compliant.

Fixes: 3f251d741150 ("selftests: Add tests for vrf and xfrms")
Reviewed-by: David Ahern &lt;dsahern@kernel.org&gt;
Signed-off-by: Magali Lemes &lt;magali.lemes@canonical.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit cb43c60e64ca67fcc9d23bd08f51d2ab8209d9d7 ]

The vrf-xfrm-tests tests use the hmac(md5) and cbc(des3_ede)
algorithms for performing authentication and encryption, respectively.
This causes the tests to fail when fips=1 is set, since these algorithms
are not allowed in FIPS mode. Therefore, switch from hmac(md5) and
cbc(des3_ede) to hmac(sha1) and cbc(aes), which are FIPS compliant.

Fixes: 3f251d741150 ("selftests: Add tests for vrf and xfrms")
Reviewed-by: David Ahern &lt;dsahern@kernel.org&gt;
Signed-off-by: Magali Lemes &lt;magali.lemes@canonical.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests: net: tls: check if FIPS mode is enabled</title>
<updated>2023-06-28T09:14:12+00:00</updated>
<author>
<name>Magali Lemes</name>
<email>magali.lemes@canonical.com</email>
</author>
<published>2023-06-13T12:32:20+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=c7632b61aa2a830f99610fc1a20a2cb4d8291fc5'/>
<id>c7632b61aa2a830f99610fc1a20a2cb4d8291fc5</id>
<content type='text'>
[ Upstream commit d113c395c67b62fc0d3f2004c0afc406aca0a2b7 ]

TLS selftests use the ChaCha20-Poly1305 and SM4 algorithms, which are not
FIPS compliant. When fips=1, this set of tests fails. Add a check and only
run these tests if not in FIPS mode.

Fixes: 4f336e88a870 ("selftests/tls: add CHACHA20-POLY1305 to tls selftests")
Fixes: e506342a03c7 ("selftests/tls: add SM4 GCM/CCM to tls selftests")
Reviewed-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Magali Lemes &lt;magali.lemes@canonical.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit d113c395c67b62fc0d3f2004c0afc406aca0a2b7 ]

TLS selftests use the ChaCha20-Poly1305 and SM4 algorithms, which are not
FIPS compliant. When fips=1, this set of tests fails. Add a check and only
run these tests if not in FIPS mode.

Fixes: 4f336e88a870 ("selftests/tls: add CHACHA20-POLY1305 to tls selftests")
Fixes: e506342a03c7 ("selftests/tls: add SM4 GCM/CCM to tls selftests")
Reviewed-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Magali Lemes &lt;magali.lemes@canonical.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests: mptcp: join: skip mixed tests if not supported</title>
<updated>2023-06-28T09:14:04+00:00</updated>
<author>
<name>Matthieu Baerts</name>
<email>matthieu.baerts@tessares.net</email>
</author>
<published>2023-06-10T16:11:52+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=b8b17211c09494f9e2b80e8f465cc61f866a1b4e'/>
<id>b8b17211c09494f9e2b80e8f465cc61f866a1b4e</id>
<content type='text'>
commit 6673851be0fc1bfc3353ffb52ff26ae5468f12c9 upstream.

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of a mix of subflows in v4 and v6 by the
in-kernel PM introduced by commit b9d69db87fb7 ("mptcp: let the
in-kernel PM use mixed IPv4 and IPv6 addresses").

It looks like there is no external sign we can use to predict the
expected behaviour. Instead of accepting different behaviours and thus
not really checking for the expected behaviour, we are looking here for
a specific kernel version. That's not ideal but it looks better than
removing the test because it cannot support older kernel versions.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: ad3493746ebe ("selftests: mptcp: add test-cases for mixed v4/v6 subflows")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts &lt;matthieu.baerts@tessares.net&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 6673851be0fc1bfc3353ffb52ff26ae5468f12c9 upstream.

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of a mix of subflows in v4 and v6 by the
in-kernel PM introduced by commit b9d69db87fb7 ("mptcp: let the
in-kernel PM use mixed IPv4 and IPv6 addresses").

It looks like there is no external sign we can use to predict the
expected behaviour. Instead of accepting different behaviours and thus
not really checking for the expected behaviour, we are looking here for
a specific kernel version. That's not ideal but it looks better than
removing the test because it cannot support older kernel versions.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: ad3493746ebe ("selftests: mptcp: add test-cases for mixed v4/v6 subflows")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts &lt;matthieu.baerts@tessares.net&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests: mptcp: join: uniform listener tests</title>
<updated>2023-06-28T09:14:03+00:00</updated>
<author>
<name>Matthieu Baerts</name>
<email>matthieu.baerts@tessares.net</email>
</author>
<published>2023-06-10T16:11:51+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=f2a248443b524c4fa8dd81b986d0c30a760aa403'/>
<id>f2a248443b524c4fa8dd81b986d0c30a760aa403</id>
<content type='text'>
commit 96b84195df61d374d8028cf426a115ae085031ec upstream.

The alignment was different from the other tests because tabs were used
instead of spaces.

While at it, also use 'echo' instead of 'printf' to print the result to
keep the same style as done in the other sub-tests. And, even if it
should be better with, also remove 'stdbuf' and sed's '--unbuffered'
option because they are not used in the other subtests and they are not
available when using a minimal environment with busybox.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 178d023208eb ("selftests: mptcp: listener test for in-kernel PM")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts &lt;matthieu.baerts@tessares.net&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 96b84195df61d374d8028cf426a115ae085031ec upstream.

The alignment was different from the other tests because tabs were used
instead of spaces.

While at it, also use 'echo' instead of 'printf' to print the result to
keep the same style as done in the other sub-tests. And, even if it
should be better with, also remove 'stdbuf' and sed's '--unbuffered'
option because they are not used in the other subtests and they are not
available when using a minimal environment with busybox.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 178d023208eb ("selftests: mptcp: listener test for in-kernel PM")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts &lt;matthieu.baerts@tessares.net&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests: mptcp: join: skip PM listener tests if not supported</title>
<updated>2023-06-28T09:14:03+00:00</updated>
<author>
<name>Matthieu Baerts</name>
<email>matthieu.baerts@tessares.net</email>
</author>
<published>2023-06-10T16:11:50+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=54722f776dcbf030d3629a90297befc62e65ac33'/>
<id>54722f776dcbf030d3629a90297befc62e65ac33</id>
<content type='text'>
commit 0471bb479af03874b09350fcfe51d3743a5608de upstream.

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of PM listener events introduced by commit
f8c9dfbd875b ("mptcp: add pm listener events").

It is possible to look for "mptcp_event_pm_listener" in kallsyms to know
in advance if the kernel supports this feature.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 178d023208eb ("selftests: mptcp: listener test for in-kernel PM")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts &lt;matthieu.baerts@tessares.net&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 0471bb479af03874b09350fcfe51d3743a5608de upstream.

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of PM listener events introduced by commit
f8c9dfbd875b ("mptcp: add pm listener events").

It is possible to look for "mptcp_event_pm_listener" in kallsyms to know
in advance if the kernel supports this feature.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 178d023208eb ("selftests: mptcp: listener test for in-kernel PM")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts &lt;matthieu.baerts@tessares.net&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests: mptcp: join: skip MPC backups tests if not supported</title>
<updated>2023-06-28T09:14:03+00:00</updated>
<author>
<name>Matthieu Baerts</name>
<email>matthieu.baerts@tessares.net</email>
</author>
<published>2023-06-10T16:11:49+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=cf84db1d9ea391088b55e8fde670eb6859c564e5'/>
<id>cf84db1d9ea391088b55e8fde670eb6859c564e5</id>
<content type='text'>
commit 632978f0a961b4591a05ba9e39eab24541d83e84 upstream.

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of sending an MP_PRIO signal for the initial
subflow, introduced by commit c157bbe776b7 ("mptcp: allow the in kernel
PM to set MPC subflow priority").

It is possible to look for "mptcp_subflow_send_ack" in kallsyms because
it was needed to introduce the mentioned feature. So we can know in
advance if the feature is supported instead of trying and accepting any
results.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 914f6a59b10f ("selftests: mptcp: add MPC backup tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts &lt;matthieu.baerts@tessares.net&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 632978f0a961b4591a05ba9e39eab24541d83e84 upstream.

Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.

One of them is the support of sending an MP_PRIO signal for the initial
subflow, introduced by commit c157bbe776b7 ("mptcp: allow the in kernel
PM to set MPC subflow priority").

It is possible to look for "mptcp_subflow_send_ack" in kallsyms because
it was needed to introduce the mentioned feature. So we can know in
advance if the feature is supported instead of trying and accepting any
results.

Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 914f6a59b10f ("selftests: mptcp: add MPC backup tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts &lt;matthieu.baerts@tessares.net&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;
</pre>
</div>
</content>
</entry>
</feed>
