<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-stable.git/tools, branch v5.4.97</title>
<subtitle>Linux kernel stable tree</subtitle>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/'/>
<entry>
<title>objtool: Don't fail on missing symbol table</title>
<updated>2021-02-07T14:35:49+00:00</updated>
<author>
<name>Josh Poimboeuf</name>
<email>jpoimboe@redhat.com</email>
</author>
<published>2021-01-14T22:14:01+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=2d7ca4a84b589210b633b3c2f2c0b8fc627c97c7'/>
<id>2d7ca4a84b589210b633b3c2f2c0b8fc627c97c7</id>
<content type='text'>
[ Upstream commit 1d489151e9f9d1647110277ff77282fe4d96d09b ]

Thanks to a recent binutils change which doesn't generate unused
symbols, it's now possible for thunk_64.o be completely empty without
CONFIG_PREEMPTION: no text, no data, no symbols.

We could edit the Makefile to only build that file when
CONFIG_PREEMPTION is enabled, but that will likely create confusion
if/when the thunks end up getting used by some other code again.

Just ignore it and move on.

Reported-by: Nathan Chancellor &lt;natechancellor@gmail.com&gt;
Reviewed-by: Nathan Chancellor &lt;natechancellor@gmail.com&gt;
Reviewed-by: Miroslav Benes &lt;mbenes@suse.cz&gt;
Tested-by: Nathan Chancellor &lt;natechancellor@gmail.com&gt;
Link: https://github.com/ClangBuiltLinux/linux/issues/1254
Signed-off-by: Josh Poimboeuf &lt;jpoimboe@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 1d489151e9f9d1647110277ff77282fe4d96d09b ]

Thanks to a recent binutils change which doesn't generate unused
symbols, it's now possible for thunk_64.o be completely empty without
CONFIG_PREEMPTION: no text, no data, no symbols.

We could edit the Makefile to only build that file when
CONFIG_PREEMPTION is enabled, but that will likely create confusion
if/when the thunks end up getting used by some other code again.

Just ignore it and move on.

Reported-by: Nathan Chancellor &lt;natechancellor@gmail.com&gt;
Reviewed-by: Nathan Chancellor &lt;natechancellor@gmail.com&gt;
Reviewed-by: Miroslav Benes &lt;mbenes@suse.cz&gt;
Tested-by: Nathan Chancellor &lt;natechancellor@gmail.com&gt;
Link: https://github.com/ClangBuiltLinux/linux/issues/1254
Signed-off-by: Josh Poimboeuf &lt;jpoimboe@redhat.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests/powerpc: Only test lwm/stmw on big endian</title>
<updated>2021-02-07T14:35:49+00:00</updated>
<author>
<name>Michael Ellerman</name>
<email>mpe@ellerman.id.au</email>
</author>
<published>2021-01-19T04:18:00+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=c6eb3dfdac44bea0cc3ac8bc5a28962d1174bbb7'/>
<id>c6eb3dfdac44bea0cc3ac8bc5a28962d1174bbb7</id>
<content type='text'>
[ Upstream commit dd3a44c06f7b4f14e90065bf05d62c255b20005f ]

Newer binutils (&gt;= 2.36) refuse to assemble lmw/stmw when building in
little endian mode. That breaks compilation of our alignment handler
test:

  /tmp/cco4l14N.s: Assembler messages:
  /tmp/cco4l14N.s:1440: Error: `lmw' invalid when little-endian
  /tmp/cco4l14N.s:1814: Error: `stmw' invalid when little-endian
  make[2]: *** [../../lib.mk:139: /output/kselftest/powerpc/alignment/alignment_handler] Error 1

These tests do pass on little endian machines, as the kernel will
still emulate those instructions even when running little
endian (which is arguably a kernel bug).

But we don't really need to test that case, so ifdef those
instructions out to get the alignment test building again.

Reported-by: Libor Pechacek &lt;lpechacek@suse.com&gt;
Signed-off-by: Michael Ellerman &lt;mpe@ellerman.id.au&gt;
Tested-by: Libor Pechacek &lt;lpechacek@suse.com&gt;
Link: https://lore.kernel.org/r/20210119041800.3093047-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit dd3a44c06f7b4f14e90065bf05d62c255b20005f ]

Newer binutils (&gt;= 2.36) refuse to assemble lmw/stmw when building in
little endian mode. That breaks compilation of our alignment handler
test:

  /tmp/cco4l14N.s: Assembler messages:
  /tmp/cco4l14N.s:1440: Error: `lmw' invalid when little-endian
  /tmp/cco4l14N.s:1814: Error: `stmw' invalid when little-endian
  make[2]: *** [../../lib.mk:139: /output/kselftest/powerpc/alignment/alignment_handler] Error 1

These tests do pass on little endian machines, as the kernel will
still emulate those instructions even when running little
endian (which is arguably a kernel bug).

But we don't really need to test that case, so ifdef those
instructions out to get the alignment test building again.

Reported-by: Libor Pechacek &lt;lpechacek@suse.com&gt;
Signed-off-by: Michael Ellerman &lt;mpe@ellerman.id.au&gt;
Tested-by: Libor Pechacek &lt;lpechacek@suse.com&gt;
Link: https://lore.kernel.org/r/20210119041800.3093047-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests: forwarding: Specify interface when invoking mausezahn</title>
<updated>2021-02-03T22:26:01+00:00</updated>
<author>
<name>Danielle Ratson</name>
<email>danieller@nvidia.com</email>
</author>
<published>2021-01-28T14:48:19+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=0551a2fd456c2f2cf578ddc52f020bb59ab34ec1'/>
<id>0551a2fd456c2f2cf578ddc52f020bb59ab34ec1</id>
<content type='text'>
[ Upstream commit 11df27f7fdf02cc2bb354358ad482e1fdd690589 ]

Specify the interface through which packets should be transmitted so
that the test will pass regardless of the libnet version against which
mausezahn is linked.

Fixes: cab14d1087d9 ("selftests: Add version of router_multipath.sh using nexthop objects")
Fixes: 3d578d879517 ("selftests: forwarding: Test IPv4 weighted nexthops")
Signed-off-by: Danielle Ratson &lt;danieller@nvidia.com&gt;
Signed-off-by: Ido Schimmel &lt;idosch@nvidia.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 11df27f7fdf02cc2bb354358ad482e1fdd690589 ]

Specify the interface through which packets should be transmitted so
that the test will pass regardless of the libnet version against which
mausezahn is linked.

Fixes: cab14d1087d9 ("selftests: Add version of router_multipath.sh using nexthop objects")
Fixes: 3d578d879517 ("selftests: forwarding: Test IPv4 weighted nexthops")
Signed-off-by: Danielle Ratson &lt;danieller@nvidia.com&gt;
Signed-off-by: Ido Schimmel &lt;idosch@nvidia.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>xfrm: Fix wraparound in xfrm_policy_addr_delta()</title>
<updated>2021-02-03T22:25:59+00:00</updated>
<author>
<name>Visa Hankala</name>
<email>visa@hankala.org</email>
</author>
<published>2020-12-30T16:15:53+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=78fc9ef35d1828fdd5506e3c523351a6348ac1d6'/>
<id>78fc9ef35d1828fdd5506e3c523351a6348ac1d6</id>
<content type='text'>
[ Upstream commit da64ae2d35d3673233f0403b035d4c6acbf71965 ]

Use three-way comparison for address components to avoid integer
wraparound in the result of xfrm_policy_addr_delta(). This ensures
that the search trees are built and traversed correctly.

Treat IPv4 and IPv6 similarly by returning 0 when prefixlen == 0.
Prefix /0 has only one equivalence class.

Fixes: 9cf545ebd591d ("xfrm: policy: store inexact policies in a tree ordered by destination address")
Signed-off-by: Visa Hankala &lt;visa@hankala.org&gt;
Acked-by: Florian Westphal &lt;fw@strlen.de&gt;
Signed-off-by: Steffen Klassert &lt;steffen.klassert@secunet.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit da64ae2d35d3673233f0403b035d4c6acbf71965 ]

Use three-way comparison for address components to avoid integer
wraparound in the result of xfrm_policy_addr_delta(). This ensures
that the search trees are built and traversed correctly.

Treat IPv4 and IPv6 similarly by returning 0 when prefixlen == 0.
Prefix /0 has only one equivalence class.

Fixes: 9cf545ebd591d ("xfrm: policy: store inexact policies in a tree ordered by destination address")
Signed-off-by: Visa Hankala &lt;visa@hankala.org&gt;
Acked-by: Florian Westphal &lt;fw@strlen.de&gt;
Signed-off-by: Steffen Klassert &lt;steffen.klassert@secunet.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>selftests: xfrm: fix test return value override issue in xfrm_policy.sh</title>
<updated>2021-02-03T22:25:59+00:00</updated>
<author>
<name>Po-Hsu Lin</name>
<email>po-hsu.lin@canonical.com</email>
</author>
<published>2020-12-30T09:52:04+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=f5e7db4fcd38cdda6ee8024f71b119fc5c8128d6'/>
<id>f5e7db4fcd38cdda6ee8024f71b119fc5c8128d6</id>
<content type='text'>
[ Upstream commit f6e9ceb7a7fc321a31a9dde93a99b7b4b016a3b3 ]

When running this xfrm_policy.sh test script, even with some cases
marked as FAIL, the overall test result will still be PASS:

$ sudo ./xfrm_policy.sh
PASS: policy before exception matches
FAIL: expected ping to .254 to fail (exceptions)
PASS: direct policy matches (exceptions)
PASS: policy matches (exceptions)
FAIL: expected ping to .254 to fail (exceptions and block policies)
PASS: direct policy matches (exceptions and block policies)
PASS: policy matches (exceptions and block policies)
FAIL: expected ping to .254 to fail (exceptions and block policies after hresh changes)
PASS: direct policy matches (exceptions and block policies after hresh changes)
PASS: policy matches (exceptions and block policies after hresh changes)
FAIL: expected ping to .254 to fail (exceptions and block policies after hthresh change in ns3)
PASS: direct policy matches (exceptions and block policies after hthresh change in ns3)
PASS: policy matches (exceptions and block policies after hthresh change in ns3)
FAIL: expected ping to .254 to fail (exceptions and block policies after htresh change to normal)
PASS: direct policy matches (exceptions and block policies after htresh change to normal)
PASS: policy matches (exceptions and block policies after htresh change to normal)
PASS: policies with repeated htresh change
$ echo $?
0

This is because the $lret in check_xfrm() is not a local variable.
Therefore when a test failed in check_exceptions(), the non-zero $lret
will later get reset to 0 when the next test calls check_xfrm().

With this fix, the final return value will be 1. Make it easier for
testers to spot this failure.

Fixes: 39aa6928d462d0 ("xfrm: policy: fix netlink/pf_key policy lookups")
Signed-off-by: Po-Hsu Lin &lt;po-hsu.lin@canonical.com&gt;
Acked-by: Florian Westphal &lt;fw@strlen.de&gt;
Signed-off-by: Steffen Klassert &lt;steffen.klassert@secunet.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit f6e9ceb7a7fc321a31a9dde93a99b7b4b016a3b3 ]

When running this xfrm_policy.sh test script, even with some cases
marked as FAIL, the overall test result will still be PASS:

$ sudo ./xfrm_policy.sh
PASS: policy before exception matches
FAIL: expected ping to .254 to fail (exceptions)
PASS: direct policy matches (exceptions)
PASS: policy matches (exceptions)
FAIL: expected ping to .254 to fail (exceptions and block policies)
PASS: direct policy matches (exceptions and block policies)
PASS: policy matches (exceptions and block policies)
FAIL: expected ping to .254 to fail (exceptions and block policies after hresh changes)
PASS: direct policy matches (exceptions and block policies after hresh changes)
PASS: policy matches (exceptions and block policies after hresh changes)
FAIL: expected ping to .254 to fail (exceptions and block policies after hthresh change in ns3)
PASS: direct policy matches (exceptions and block policies after hthresh change in ns3)
PASS: policy matches (exceptions and block policies after hthresh change in ns3)
FAIL: expected ping to .254 to fail (exceptions and block policies after htresh change to normal)
PASS: direct policy matches (exceptions and block policies after htresh change to normal)
PASS: policy matches (exceptions and block policies after htresh change to normal)
PASS: policies with repeated htresh change
$ echo $?
0

This is because the $lret in check_xfrm() is not a local variable.
Therefore when a test failed in check_exceptions(), the non-zero $lret
will later get reset to 0 when the next test calls check_xfrm().

With this fix, the final return value will be 1. Make it easier for
testers to spot this failure.

Fixes: 39aa6928d462d0 ("xfrm: policy: fix netlink/pf_key policy lookups")
Signed-off-by: Po-Hsu Lin &lt;po-hsu.lin@canonical.com&gt;
Acked-by: Florian Westphal &lt;fw@strlen.de&gt;
Signed-off-by: Steffen Klassert &lt;steffen.klassert@secunet.com&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>tools: Factor HOSTCC, HOSTLD, HOSTAR definitions</title>
<updated>2021-01-30T12:54:10+00:00</updated>
<author>
<name>Jean-Philippe Brucker</name>
<email>jean-philippe@linaro.org</email>
</author>
<published>2020-11-10T16:43:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=43546b74ce6cae3d0c2fa772970f2f3eeb2a0d6e'/>
<id>43546b74ce6cae3d0c2fa772970f2f3eeb2a0d6e</id>
<content type='text'>
commit c8a950d0d3b926a02c7b2e713850d38217cec3d1 upstream.

Several Makefiles in tools/ need to define the host toolchain variables.
Move their definition to tools/scripts/Makefile.include

Signed-off-by: Jean-Philippe Brucker &lt;jean-philippe@linaro.org&gt;
Signed-off-by: Andrii Nakryiko &lt;andrii@kernel.org&gt;
Acked-by: Jiri Olsa &lt;jolsa@redhat.com&gt;
Acked-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
Link: https://lore.kernel.org/bpf/20201110164310.2600671-2-jean-philippe@linaro.org
Cc: Alistair Delva &lt;adelva@google.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit c8a950d0d3b926a02c7b2e713850d38217cec3d1 upstream.

Several Makefiles in tools/ need to define the host toolchain variables.
Move their definition to tools/scripts/Makefile.include

Signed-off-by: Jean-Philippe Brucker &lt;jean-philippe@linaro.org&gt;
Signed-off-by: Andrii Nakryiko &lt;andrii@kernel.org&gt;
Acked-by: Jiri Olsa &lt;jolsa@redhat.com&gt;
Acked-by: Rafael J. Wysocki &lt;rafael.j.wysocki@intel.com&gt;
Link: https://lore.kernel.org/bpf/20201110164310.2600671-2-jean-philippe@linaro.org
Cc: Alistair Delva &lt;adelva@google.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>selftests: net: fib_tests: remove duplicate log test</title>
<updated>2021-01-27T10:47:48+00:00</updated>
<author>
<name>Hangbin Liu</name>
<email>liuhangbin@gmail.com</email>
</author>
<published>2021-01-19T02:59:30+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=391187744436ec5bf00bab9952d145fc9fb652d1'/>
<id>391187744436ec5bf00bab9952d145fc9fb652d1</id>
<content type='text'>
[ Upstream commit fd23d2dc180fccfad4b27a8e52ba1bc415d18509 ]

The previous test added an address with a specified metric and check if
correspond route was created. I somehow added two logs for the same
test. Remove the duplicated one.

Reported-by: Antoine Tenart &lt;atenart@redhat.com&gt;
Fixes: 0d29169a708b ("selftests/net/fib_tests: update addr_metric_test for peer route testing")
Signed-off-by: Hangbin Liu &lt;liuhangbin@gmail.com&gt;
Reviewed-by: David Ahern &lt;dsahern@kernel.org&gt;
Link: https://lore.kernel.org/r/20210119025930.2810532-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit fd23d2dc180fccfad4b27a8e52ba1bc415d18509 ]

The previous test added an address with a specified metric and check if
correspond route was created. I somehow added two logs for the same
test. Remove the duplicated one.

Reported-by: Antoine Tenart &lt;atenart@redhat.com&gt;
Fixes: 0d29169a708b ("selftests/net/fib_tests: update addr_metric_test for peer route testing")
Signed-off-by: Hangbin Liu &lt;liuhangbin@gmail.com&gt;
Reviewed-by: David Ahern &lt;dsahern@kernel.org&gt;
Link: https://lore.kernel.org/r/20210119025930.2810532-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>perf intel-pt: Fix 'CPU too large' error</title>
<updated>2021-01-19T17:26:16+00:00</updated>
<author>
<name>Adrian Hunter</name>
<email>adrian.hunter@intel.com</email>
</author>
<published>2021-01-07T17:41:59+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=d443cefd9f733b037f3b82424823ba993a87062c'/>
<id>d443cefd9f733b037f3b82424823ba993a87062c</id>
<content type='text'>
commit 5501e9229a80d95a1ea68609f44c447a75d23ed5 upstream.

In some cases, the number of cpus (nr_cpus_online) is confused with the
maximum cpu number (nr_cpus_avail), which results in the error in the
example below:

Example on system with 8 cpus:

 Before:
   # echo 0 &gt; /sys/devices/system/cpu/cpu2/online
   # ./perf record --kcore -e intel_pt// taskset --cpu-list 7 uname
   Linux
   [ perf record: Woken up 1 times to write data ]
   [ perf record: Captured and wrote 0.147 MB perf.data ]
   # ./perf script --itrace=e
   Requested CPU 7 too large. Consider raising MAX_NR_CPUS
   0x25908 [0x8]: failed to process type: 68 [Invalid argument]

 After:
   # ./perf script --itrace=e
   #

Fixes: 8c7274691f0d ("perf machine: Replace MAX_NR_CPUS with perf_env::nr_cpus_online")
Fixes: 7df4e36a4785 ("perf session: Replace MAX_NR_CPUS with perf_env::nr_cpus_online")
Signed-off-by: Adrian Hunter &lt;adrian.hunter@intel.com&gt;
Tested-by: Kan Liang &lt;kan.liang@linux.intel.com&gt;
Cc: Jiri Olsa &lt;jolsa@redhat.com&gt;
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210107174159.24897-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo &lt;acme@redhat.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 5501e9229a80d95a1ea68609f44c447a75d23ed5 upstream.

In some cases, the number of cpus (nr_cpus_online) is confused with the
maximum cpu number (nr_cpus_avail), which results in the error in the
example below:

Example on system with 8 cpus:

 Before:
   # echo 0 &gt; /sys/devices/system/cpu/cpu2/online
   # ./perf record --kcore -e intel_pt// taskset --cpu-list 7 uname
   Linux
   [ perf record: Woken up 1 times to write data ]
   [ perf record: Captured and wrote 0.147 MB perf.data ]
   # ./perf script --itrace=e
   Requested CPU 7 too large. Consider raising MAX_NR_CPUS
   0x25908 [0x8]: failed to process type: 68 [Invalid argument]

 After:
   # ./perf script --itrace=e
   #

Fixes: 8c7274691f0d ("perf machine: Replace MAX_NR_CPUS with perf_env::nr_cpus_online")
Fixes: 7df4e36a4785 ("perf session: Replace MAX_NR_CPUS with perf_env::nr_cpus_online")
Signed-off-by: Adrian Hunter &lt;adrian.hunter@intel.com&gt;
Tested-by: Kan Liang &lt;kan.liang@linux.intel.com&gt;
Cc: Jiri Olsa &lt;jolsa@redhat.com&gt;
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210107174159.24897-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo &lt;acme@redhat.com&gt;
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
<entry>
<title>selftests: fix the return value for UDP GRO test</title>
<updated>2021-01-19T17:26:15+00:00</updated>
<author>
<name>Po-Hsu Lin</name>
<email>po-hsu.lin@canonical.com</email>
</author>
<published>2021-01-05T10:17:40+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=242793c7ef2fe941a42702d37dbc2591979bc32d'/>
<id>242793c7ef2fe941a42702d37dbc2591979bc32d</id>
<content type='text'>
[ Upstream commit 3503ee6c0bec5f173d606359e6384a5ef85492fb ]

The udpgro.sh will always return 0 (unless the bpf selftest was not
build first) even if there are some failed sub test-cases.

Therefore the kselftest framework will report this case is OK.

Check and return the exit status of each test to make it easier to
spot real failures.

Signed-off-by: Po-Hsu Lin &lt;po-hsu.lin@canonical.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
[ Upstream commit 3503ee6c0bec5f173d606359e6384a5ef85492fb ]

The udpgro.sh will always return 0 (unless the bpf selftest was not
build first) even if there are some failed sub test-cases.

Therefore the kselftest framework will report this case is OK.

Check and return the exit status of each test to make it easier to
spot real failures.

Signed-off-by: Po-Hsu Lin &lt;po-hsu.lin@canonical.com&gt;
Signed-off-by: David S. Miller &lt;davem@davemloft.net&gt;
Signed-off-by: Sasha Levin &lt;sashal@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>bpftool: Fix compilation failure for net.o with older glibc</title>
<updated>2021-01-17T13:05:37+00:00</updated>
<author>
<name>Alan Maguire</name>
<email>alan.maguire@oracle.com</email>
</author>
<published>2021-01-06T15:59:06+00:00</published>
<link rel='alternate' type='text/html' href='https://git.tavy.me/linux-stable.git/commit/?id=a2b2ae3812e55b625cfcc715f93ae4330a93f6f4'/>
<id>a2b2ae3812e55b625cfcc715f93ae4330a93f6f4</id>
<content type='text'>
commit 6f02b540d7597f357bc6ee711346761045d4e108 upstream.

For older glibc ~2.17, #include'ing both linux/if.h and net/if.h
fails due to complaints about redefinition of interface flags:

  CC       net.o
In file included from net.c:13:0:
/usr/include/linux/if.h:71:2: error: redeclaration of enumerator ‘IFF_UP’
  IFF_UP    = 1&lt;&lt;0,  /* sysfs */
  ^
/usr/include/net/if.h:44:5: note: previous definition of ‘IFF_UP’ was here
     IFF_UP = 0x1,  /* Interface is up.  */

The issue was fixed in kernel headers in [1], but since compilation
of net.c picks up system headers the problem can recur.

Dropping #include &lt;linux/if.h&gt; resolves the issue and it is
not needed for compilation anyhow.

[1] https://lore.kernel.org/netdev/1461512707-23058-1-git-send-email-mikko.rapeli__34748.27880641$1462831734$gmane$org@iki.fi/

Fixes: f6f3bac08ff9 ("tools/bpf: bpftool: add net support")
Signed-off-by: Alan Maguire &lt;alan.maguire@oracle.com&gt;
Signed-off-by: Andrii Nakryiko &lt;andrii@kernel.org&gt;
Acked-by: Martin KaFai Lau &lt;kafai@fb.com&gt;
Link: https://lore.kernel.org/bpf/1609948746-15369-1-git-send-email-alan.maguire@oracle.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
commit 6f02b540d7597f357bc6ee711346761045d4e108 upstream.

For older glibc ~2.17, #include'ing both linux/if.h and net/if.h
fails due to complaints about redefinition of interface flags:

  CC       net.o
In file included from net.c:13:0:
/usr/include/linux/if.h:71:2: error: redeclaration of enumerator ‘IFF_UP’
  IFF_UP    = 1&lt;&lt;0,  /* sysfs */
  ^
/usr/include/net/if.h:44:5: note: previous definition of ‘IFF_UP’ was here
     IFF_UP = 0x1,  /* Interface is up.  */

The issue was fixed in kernel headers in [1], but since compilation
of net.c picks up system headers the problem can recur.

Dropping #include &lt;linux/if.h&gt; resolves the issue and it is
not needed for compilation anyhow.

[1] https://lore.kernel.org/netdev/1461512707-23058-1-git-send-email-mikko.rapeli__34748.27880641$1462831734$gmane$org@iki.fi/

Fixes: f6f3bac08ff9 ("tools/bpf: bpftool: add net support")
Signed-off-by: Alan Maguire &lt;alan.maguire@oracle.com&gt;
Signed-off-by: Andrii Nakryiko &lt;andrii@kernel.org&gt;
Acked-by: Martin KaFai Lau &lt;kafai@fb.com&gt;
Link: https://lore.kernel.org/bpf/1609948746-15369-1-git-send-email-alan.maguire@oracle.com
Signed-off-by: Greg Kroah-Hartman &lt;gregkh@linuxfoundation.org&gt;

</pre>
</div>
</content>
</entry>
</feed>
