linux-stable.git/tools, branch v5.4.23

bpf: Selftests build error in sockmap_basic.c

2020-02-28T16:22:28+00:00

commit f2e97dc126b712c0d21219ed0c42710006c1cf52 upstream.

Fix following build error. We could push a tcp.h header into one of the
include paths, but I think its easy enough to simply pull in the three
defines we need here. If we end up using more of tcp.h at some point
we can pull it in later.

/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c: In function ‘connected_socket_v4’:
/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:20:11: error: ‘TCP_REPAIR_ON’ undeclared (first use in this function)
  repair = TCP_REPAIR_ON;
           ^
/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:20:11: note: each undeclared identifier is reported only once for each function it appears in
/home/john/git/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_basic.c:29:11: error: ‘TCP_REPAIR_OFF_NO_WP’ undeclared (first use in this function)
  repair = TCP_REPAIR_OFF_NO_WP;

Then with fix,

$ ./test_progs -n 44
#44/1 sockmap create_update_free:OK
#44/2 sockhash create_update_free:OK
#44 sockmap_basic:OK

Fixes: 5d3919a953c3c ("selftests/bpf: Test freeing sockmap/sockhash with a socket in it")
Signed-off-by: John Fastabend 
Signed-off-by: Alexei Starovoitov 
Reviewed-by: Jakub Sitnicki 
Link: https://lore.kernel.org/bpf/158131347731.21414.12120493483848386652.stgit@john-Precision-5820-Tower
Signed-off-by: Greg Kroah-Hartman

selftests/eeh: Bump EEH wait time to 60s

2020-02-24T07:36:57+00:00

[ Upstream commit 414f50434aa2463202a5b35e844f4125dd1a7101 ]

Some newer cards supported by aacraid can take up to 40s to recover
after an EEH event. This causes spurious failures in the basic EEH
self-test since the current maximim timeout is only 30s.

Fix the immediate issue by bumping the timeout to a default of 60s,
and allow the wait time to be specified via an environmental variable
(EEH_MAX_WAIT).

Reported-by: Steve Best 
Suggested-by: Douglas Miller 
Signed-off-by: Oliver O'Halloran 
Signed-off-by: Michael Ellerman 
Link: https://lore.kernel.org/r/20200122031125.25991-1-oohall@gmail.com
Signed-off-by: Sasha Levin

selftests: bpf: Reset global state between reuseport test runs

2020-02-24T07:36:57+00:00

[ Upstream commit 51bad0f05616c43d6d34b0a19bcc9bdab8e8fb39 ]

Currently, there is a lot of false positives if a single reuseport test
fails. This is because expected_results and the result map are not cleared.

Zero both after individual test runs, which fixes the mentioned false
positives.

Fixes: 91134d849a0e ("bpf: Test BPF_PROG_TYPE_SK_REUSEPORT")
Signed-off-by: Lorenz Bauer 
Signed-off-by: Daniel Borkmann 
Reviewed-by: Jakub Sitnicki 
Acked-by: Martin KaFai Lau 
Acked-by: John Fastabend 
Link: https://lore.kernel.org/bpf/20200124112754.19664-5-lmb@cloudflare.com
Signed-off-by: Sasha Levin

x86/decoder: Add TEST opcode to Group3-2

2020-02-24T07:36:55+00:00

[ Upstream commit 8b7e20a7ba54836076ff35a28349dabea4cec48f ]

Add TEST opcode to Group3-2 reg=001b as same as Group3-1 does.

Commit

  12a78d43de76 ("x86/decoder: Add new TEST instruction pattern")

added a TEST opcode assignment to f6 XX/001/XXX (Group 3-1), but did
not add f7 XX/001/XXX (Group 3-2).

Actually, this TEST opcode variant (ModRM.reg /1) is not described in
the Intel SDM Vol2 but in AMD64 Architecture Programmer's Manual Vol.3,
Appendix A.2 Table A-6. ModRM.reg Extensions for the Primary Opcode Map.

Without this fix, Randy found a warning by insn_decoder_test related
to this issue as below.

    HOSTCC  arch/x86/tools/insn_decoder_test
    HOSTCC  arch/x86/tools/insn_sanity
    TEST    posttest
  arch/x86/tools/insn_decoder_test: warning: Found an x86 instruction decoder bug, please report this.
  arch/x86/tools/insn_decoder_test: warning: ffffffff81000bf1:	f7 0b 00 01 08 00    	testl  $0x80100,(%rbx)
  arch/x86/tools/insn_decoder_test: warning: objdump says 6 bytes, but insn_get_length() says 2
  arch/x86/tools/insn_decoder_test: warning: Decoded and checked 11913894 instructions with 1 failures
    TEST    posttest
  arch/x86/tools/insn_sanity: Success: decoded and checked 1000000 random instructions with 0 errors (seed:0x871ce29c)

To fix this error, add the TEST opcode according to AMD64 APM Vol.3.

 [ bp: Massage commit message. ]

Reported-by: Randy Dunlap 
Signed-off-by: Masami Hiramatsu 
Signed-off-by: Borislav Petkov 
Acked-by: Randy Dunlap 
Tested-by: Randy Dunlap 
Link: https://lkml.kernel.org/r/157966631413.9580.10311036595431878351.stgit@devnote2
Signed-off-by: Sasha Levin

objtool: Fix ARCH=x86_64 build error

2020-02-24T07:36:55+00:00

[ Upstream commit 8580bed7e751e6d4f17881e059daf3cb37ba4717 ]

Building objtool with ARCH=x86_64 fails with:

   $make ARCH=x86_64 -C tools/objtool
   ...
     CC       arch/x86/decode.o
   arch/x86/decode.c:10:22: fatal error: asm/insn.h: No such file or directory
    #include 
                         ^
   compilation terminated.
   mv: cannot stat ‘arch/x86/.decode.o.tmp’: No such file or directory
   make[2]: *** [arch/x86/decode.o] Error 1
   ...

The root cause is that the command-line variable 'ARCH' cannot be
overridden.  It can be replaced by 'SRCARCH', which is defined in
'tools/scripts/Makefile.arch'.

Signed-off-by: Shile Zhang 
Signed-off-by: Josh Poimboeuf 
Signed-off-by: Ingo Molnar 
Reviewed-by: Kamalesh Babulal 
Link: https://lore.kernel.org/r/d5d11370ae116df6c653493acd300ec3d7f5e925.1579543924.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin

usbip: Fix unsafe unaligned pointer usage

2020-02-24T07:36:44+00:00

[ Upstream commit 585c91f40d201bc564d4e76b83c05b3b5363fe7e ]

Fix unsafe unaligned pointer usage in usbip network interfaces. usbip tool
build fails with new gcc -Werror=address-of-packed-member checks.

usbip_network.c: In function ‘usbip_net_pack_usb_device’:
usbip_network.c:79:32: error: taking address of packed member of ‘struct usbip_usb_device’ may result in an unaligned pointer value [-Werror=address-of-packed-member]
   79 |  usbip_net_pack_uint32_t(pack, &udev->busnum);

Fix with minor changes to pass by value instead of by address.

Signed-off-by: Shuah Khan 
Link: https://lore.kernel.org/r/20200109012416.2875-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman 
Signed-off-by: Sasha Levin

tools lib api fs: Fix gcc9 stringop-truncation compilation error

2020-02-24T07:36:43+00:00

[ Upstream commit 6794200fa3c9c3e6759dae099145f23e4310f4f7 ]

GCC9 introduced string hardening mechanisms, which exhibits the error
during fs api compilation:

error: '__builtin_strncpy' specified bound 4096 equals destination size
[-Werror=stringop-truncation]

This comes when the length of copy passed to strncpy is is equal to
destination size, which could potentially lead to buffer overflow.

There is a need to mitigate this potential issue by limiting the size of
destination by 1 and explicitly terminate the destination with NULL.

Signed-off-by: Andrey Zhizhikin 
Reviewed-by: Petr Mladek 
Acked-by: Jiri Olsa 
Cc: Alexei Starovoitov 
Cc: Andrii Nakryiko 
Cc: Daniel Borkmann 
Cc: Kefeng Wang 
Cc: Martin KaFai Lau 
Cc: Petr Mladek 
Cc: Sergey Senozhatsky 
Cc: Song Liu 
Cc: Yonghong Song 
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20191211080109.18765-1-andrey.zhizhikin@leica-geosystems.com
Signed-off-by: Arnaldo Carvalho de Melo 
Signed-off-by: Sasha Levin

bpf: Print error message for bpftool cgroup show

2020-02-24T07:36:40+00:00

[ Upstream commit 1162f844030ac1ac7321b5e8f6c9badc7a11428f ]

Currently, when bpftool cgroup show  has an error, no error
message is printed. This is confusing because the user may think the
result is empty.

Before the change:

$ bpftool cgroup show /sys/fs/cgroup
ID       AttachType      AttachFlags     Name
$ echo $?
255

After the change:
$ ./bpftool cgroup show /sys/fs/cgroup
Error: can't query bpf programs attached to /sys/fs/cgroup: Operation
not permitted

v2: Rename check_query_cgroup_progs to cgroup_has_attached_progs

Signed-off-by: Hechao Li 
Signed-off-by: Daniel Borkmann 
Link: https://lore.kernel.org/bpf/20191224011742.3714301-1-hechaol@fb.com
Signed-off-by: Sasha Levin

selftests/net: make so_txtime more robust to timer variance

2020-02-24T07:36:36+00:00

[ Upstream commit ea6a547669b37453f2b1a5d85188d75b3613dfaa ]

The SO_TXTIME test depends on accurate timers. In some virtualized
environments the test has been reported to be flaky. This is easily
reproduced by disabling kvm acceleration in Qemu.

Allow greater variance in a run and retry to further reduce flakiness.

Observed errors are one of two kinds: either the packet arrives too
early or late at recv(), or it was dropped in the qdisc itself and the
recv() call times out.

In the latter case, the qdisc queues a notification to the error
queue of the send socket. Also explicitly report this cause.

Link: https://lore.kernel.org/netdev/CA+FuTSdYOnJCsGuj43xwV1jxvYsaoa_LzHQF9qMyhrkLrivxKw@mail.gmail.com
Reported-by: Naresh Kamboju 
Signed-off-by: Willem de Bruijn 
Signed-off-by: Jakub Kicinski 
Signed-off-by: Sasha Levin

selftests: settings: tests can be in subsubdirs

2020-02-24T07:36:30+00:00

[ Upstream commit ac87813d4372f4c005264acbe3b7f00c1dee37c4 ]

Commit 852c8cbf34d3 ("selftests/kselftest/runner.sh: Add 45 second
timeout per test") adds support for a new per-test-directory "settings"
file. But this only works for tests not in a sub-subdirectories, e.g.

 - tools/testing/selftests/rtc (rtc) is OK,
 - tools/testing/selftests/net/mptcp (net/mptcp) is not.

We have to increase the timeout for net/mptcp tests which are not
upstreamed yet but this fix is valid for other tests if they need to add
a "settings" file, see the full list with:

  tools/testing/selftests/*/*/**/Makefile

Note that this patch changes the text header message printed at the end
of the execution but this text is modified only for the tests that are
in sub-subdirectories, e.g.

  ok 1 selftests: net/mptcp: mptcp_connect.sh

Before we had:

  ok 1 selftests: mptcp: mptcp_connect.sh

But showing the full target name is probably better, just in case a
subsubdir has the same name as another one in another subdirectory.

Fixes: 852c8cbf34d3 (selftests/kselftest/runner.sh: Add 45 second timeout per test)
Signed-off-by: Matthieu Baerts 
Reviewed-by: Kees Cook 
Signed-off-by: Shuah Khan 
Signed-off-by: Sasha Levin